Rigid 4x2/6x2/6x4/8x4NGT tractor - 4x2

Low Entry Crew CabSpecial Application ChassisNGT

1824LL1829LL

1828LLSG1828LLG2628LLG2629LL3233LL

High-roof cab Low-roof cab

Dimensions (mm) 4x2 4x2 4x2 6x2 NGT tractor kerbsider rigid mid steer

A Wheelbase (first to second axle)¥ 3450 5100 3900* 3450A+ 1350mm (outer axle spread) NA NA NA 4800B Front overhang 1850 1850 1850 1850C Rear overhang 770 1650 1200 1200D Overall length 6075 8600 6950 7850E Frame height at rear axle 880# 910 910 915F Frame depth 284 284 284 284G Back of exhaust pipe or air stack to end of frame 3726 6160 4600 5500H Bumper to back of cab 2032 2032 2032 2032I Back of cab to centre line of front axle 182 182 182 182J Overall height (nominal not inc sunroof) - unladen 2820 2870 2870 2885K Ground clearance front 135 190 190 205L Width over cab 2490 2490 2490 2490M Ground clearance rear 180 240 230 245N Frame width (at rear) 760 760 760 760O Bogie spread NA NA NA 1350P First step height from ground 450 495 495 515R Cab floor height from ground 795 840 840 860S Centre line of front axle to rear of exhaust pipe or air stack NA 590 500 500Turning circle (wall to wall) - Tolerance +0.5m, - 0.0m NA 21.5m 16.1m 19.1mMinimum cab gap (to rear of exhaust pipe) NA 50 50 50

¥ First steer axle to first drive axle on 8x4 modelAll heights are in ‘laden’ condition unless otherwise stated

Weights (kg) 1828LLSG 1824LL 4x2 1824LL 4x2 2629LL 6x2

Kerb weights (kg)Front axle 4460 4320 4300 4510Mid/rear axle 2125 1840 1745 1120/1720Rear bogie NA NA NA 2835Total 6765 6160 6045 7345

Kerb weights (kg) UK Authorised UK Authorised UK Authorised UK Authorised and design and design and design and design

GVW 18000 18000 18000 26000Front axle 7500 7100 7100 8000Steer axle NA NA NA 7500Drive axle 1 11500 11500 11500 11500Drive axle 2 NA NA NA NAGCW 36000 NA NA NA

The following overall frame height adjustment is available when stationary: 4x2 rigid model: + 100mm, - 60mm 6x2 mid steer model: + 80mm, - 60mm 6x2 rear steer model: + 100mm, - 60mm 6x4 model: + 100mm, - 60mm 8x4 model: + 80mm, - 60mm

1824LL1829LL

1828LLSG1828LLG2628LLG2629LL3233LL

* Also available with 3450, 4200, 4500mm wheelbase 5.7m kerbsider available via CTT modification# NGT tractor - height to top of mounting angles

4x2 TRACTOR 4x2 KERBSIDER

4X2 TRACTOR 4X2 RIGID

AB

P

I

R

C

G

D

H

E

AB

P

SI

R

C

F

G

E

D

N

H

N

6x2 6x2 6x2 6x2 6x2 6x4 6x4 8x4

mid steer mid steer rear steer rear steer rear steer double drive double drive mid steer

3900 4200 3450 3900 4200** 3900 4200 5100 5250 5550 4800 5250 5550 5250 5550 6450 1850 1850 1850 1850 1850 1850 1850 1850 1200 1200 1200 1200 1200 1200 1200 1200 8300 8600 7850 8300 8600 8300 8600 9500 915 915 915 915 915 960 960 960 284 284 284 284 284 284 284 284 5950 6250 5500 5950 6250 5950 6250 7150 2032 2032 2032 2032 2032 2032 2032 2032 182 182 182 182 182 182 182 182 2885 2885 2885 2885 2885 2925 2925 2925 205 205 205 205 205 290 290 290 2490 2490 2490 2490 2490 2490 2490 2490 245 245 245 245 245 270 270 270 760 760 760 760 760 760 760 760 1350 1350 1350 1350 1350 1350 1350 1350 515 515 515 515 515 565 565 565 860 860 860 860 860 910 910 910 500 500 500 500 500 500 500 500 20.3m 21.1m 14.8m 16.1m 16.9m 19m 20m 22.5m 50 50 50 50 50 50 50 50

2629LL 6x2 2629LL 6x2 2629LL 6x2 2629LL 6x2 2629LL 6x2 2629LL 6x4 2629LL 6x4 3233LL 8x4 double drive

4390 4440 4450 4535 4625 4575 4660 4850 1195/1810 1170/1800 1730/1155 1700/1125 1645/1120 1680 1660 1200 3005 2965 2890 2815 2765 1680 1660 3080 7395 7400 7330 7350 7390 7940 7980 9125

UK Authorised UK Authorised UK Authorised UK Authorised UK Authorised UK Authorised UK Authorised UK Authorised and design and design and design and design and design and design and design and design

26000 26000 26000 26000 26000 26000 26000 32000 8000 8000 7500 7500 7500 7500 7500 8000 7500 7500 7500 7500 7500 NA NA 6800 11500 11500 11500 11500 11500 9500 9500 8600 NA NA NA NA NA 9500 9500 8600 NA NA NA NA NA NA NA NA

** also available with 4500, 4800mm wheelbaseWeights and dimensions are to standard specification; including driver, 20 litres of fuel, 5 litres of AdBlue, oil, water and tools.

Kerb weights are indicative and are subject to manufacturing toleranceCNG equipment on rigid models add approximately 800kg to kerb weight

6x2 MID STEER

6X4 DOUBLE DRIVE

8X4 MID STEER 6X2 REAR STEER

K

L

G

A O C

EF

B

H

J

D

P

SI

R

MK

L

G

A O C

EF

B

H

J

D

P

SI

R

N NN

Engine Speed (1/min)

800 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600

Euro 5(0.03/2.0)

NGT Econic(0.004/1.94)

EEV(0.02/2.0)

Euro 4(0.03/3.5)

(PM 10 and smaller)

when it combusts. The natural gas Econic clearly undercuts the EEV and

Euro 5 particulate limits (0.004)

Emissions limits for the ETC cycle (transient)

Part

icul

ate

mat

ter

PM [g

/kW

h]

0.03

0.02

0.01

0.000.00 1.00 2.00 3.00 Nitrogen oxide

NOx [g/kWh]

Engine 1824LL 1829LL 3233LL 2629LL Type Mercedes-Benz OM926LA Mercedes-Benz OM926LA Mercedes-Benz OM926LA 7.20 litre turbo-intercooled 7.20 litre turbo-intercooled 7.20 litre turbo-intercooled 6 cylinder direct injection 6 cylinder direct injection 6 cylinder direct injection diesel to EEV emissions standard diesel to EEV emissions standard diesel to EEV emissions standard

Max. power 175kW @ 2200 rpm 210kW @ 2200 rpm 240kW @ 2200 rpm 238PS @ 2200 rpm 286PS @ 2200 rpm 326PS @ 2200 rpm

Max. torque 850Nm @ 1200 - 1600 rpm 1120Nm @ 1200 - 1600 rpm 1300Nm @ 1200 - 1600 rpm 627lbft @ 1200 - 1600 rpm 826lbft @ 1200 - 1600 rpm 960lbft @ 1200 - 1600 rpm

Bore 106mm 106mm 106mm Stroke 136mm 136mm 136mm Capacity 7.20 litres 7.20 litres 7.20 litres Control Electronic engine management Electronic engine management Electronic engine management Fuel injection Direct injection via unit injectors Direct injection via unit injectors Direct injection via unit injectors Cooling Water cooled with hydrostatic fan Water cooled with hydrostatic fan Water cooled with hydrostatic fan Security Immobiliser to Thatcham H2 Immobiliser to Thatcham H2 Immobiliser to Thatcham H2 Engine brake Constant throttle & butterfly Constant throttle & butterfly Constant throttle & butterfly Performance curves

1828LLSG Type Mercedes-Benz M906LAG 6.88 litre turbo-intercooled 6 cylinder four stroke spark ignition natural gas to EEV emissions standard

Max. power 205kW @ 2200 rpm 279PS @ 2200 rpm

Max. torque 1000Nm @ 1400 rpm 738lbft @ 1400 rpm

Bore 106mm Stroke 130mm Capacity 6.37 litres Control Electronic engine management Fuel injection Multi point gas injection - operating pressure up to 8.3 bar Cooling Water cooled with hydrostatic fan Security Immobiliser to Thatcham H2 Secondary brake Retarder built into Allison transmission Performance curves

NGT rigid models availableTypes Model Wheelbase

1828 NGT 4x2 3900mm

4200mm

2628 NGT 6x2 rear steer 3900mm

4200mm

4800mm

TransmissionGearbox & Gearbox RatiosAllison automatic 6 speed with push button electronic gear selection andtorque control

Models 1824LL, 1829LL, 2629LL NGT tractor 3233LL

Type 3000P 3500PR 3200P

1st 3.49 4.59 3.49

2nd 1.86 2.25 1.86

3rd 1.41 1.54 1.41

4th 1.00 1.00 1.00

5th 0.75 0.75 0.75

6th 0.65 0.65 0.65

Reverse 5.34 5.0 5.34

Rigid NGT models fitted with Allison 3000PR automatic gearboxincluding retarder. Ratios as for 3000P

Rear Axles Ratios & PerformanceModel 1824LL 2629LL 3233LL 1828LLSG

Configuration 4x2 6x2/6x4 8x4 4x2 tractorAxle ratio 6.82:1 6.82:1 6.82:1 5.85:1Governed speed (mph) 56 56 56 56Geared speed (mph) 62 64 64 69Gradeability % Max 40 32 27 N/A Restart 32 28 23 N/A

AxlesFront Mercedes-Benz forged ‘I’ beamSecond steer Mercedes-Benz forged ‘I’ beam(6x2 8x4) Electronically/hydraulically steeredDrive Mercedes-Benz hub reduction with differential lockDrive (6x4, 8x4) Mercedes-Benz hub reduction with inter and cross axle differential locks

ChassisBrakesFront/Rear Disc brakes with ABS and ASRService Automatic brake adjustment Heated air dryerParking Rear spring brakesEngine Constant throttle engine brake and exhaust brake operated with service brakeCompressor Twin cylinder

Fuel tank Diesel modelsCapacity 200 litre alloyMounting Right hand side of chassisSecurity Locking fuel cap

NGT models 4 x 80L steel gas tank per side - Total 640L Pressure up to 200bar, certified to ECE R110

AdBlue tank (not fitted to NGT models)Capacity 25 litre plasticMounting Right hand side of chassis

SteeringType Recirculating ball Variable ratio Integral power assistance Steering column lock Pneumatically adjustable column

Wheels & TyresWheels 9.00 x 22.5Tyres 4x2 295/80R 22.5 6x2 mid steer 315/80R 22.5 6x2 rear steer 315/80R 22.5 6x4 double drive 315/80R 22.5 8x4 mid steer 315/80R 22.5 4x2 tractor FA 355/50R 22.5 RA 295/60R 22.5

ExhaustStainless steel SCR catalytic converter on nearside of frame with vertical tail pipe and 600mm extension1824LL kerbsider model - Stainless steel catalytic converter mounted vertically behind cab on nearsideNGT tractor - Oxidation catalyst mounted on nearside of frame with down facing tail pipeNGT rigid - Oxidation catalyst mounted on nearside of frame with vertical tailpipe and 600mm extension

ChassisTwo piece ladder frame, high tensile steel - pre-drilled hole patternsParallel section, unobstructed top flangeLowered front sectionBatteries and air tank carrier mounted on nearside (offside on kerbsider model)Rear wings on NGT tractor - 3 piece with spray suppressionGeorge Fischer fifth wheel (dual height) H=165+50 on NGT tractor

SuspensionFront axle Air suspension with stabiliser and shock absorbersDrive axle(s) Air suspension with stabiliser and shock absorbersSecond steer axle Air suspension with airbag pressure (6x2) reduction for traction assistance Telligent® electronic controlAxle load indicator Sensors built into airbags (Not NGT tractor)

Electrical systemsVoltage 24 voltType CAN Databus with P.S.M. electronic interface for body and equipment Circuit breakersBatteries 2 x 12 volt,165Ah (NGT models 2 x 220Ah)Alternator 28 volt/100 ampRoad lights Halogen headlamps Side lights Roof marker lights Side marker lights Reversing lights Direction indicators Indicator side repeaters Rear fog lampWarning lights Air suspension setting Main beam/flasher Direction indicators Parking brake Rear fog lamp Hazard lights Cab tilt lock Engine brake ABSCoupling (4x2 tractor) 15 pin to 2x7 pin socket

CabConstructionAluminium space frame with sheet moulded composite panelsMeets ECE R29-2 impact requirementsSingle step entryEntry step illuminationHinged driver’s doorFlat floorAir operated folding passenger door — speed dependent automatic closing with matching lock4-point cab suspension (rubber mounts at front - spring struts at rear shock absorbers front and rear)Entry grab handlesGrab rail inside front of cab above windscreenHydraulic tilt mechanismInterior height 1935mmHeat insulating glassFront underrun guard on 6x4 and 8x4 modelsPreparation wiring for roof beaconsPreparation wiring for 24 volt monitorEngine underprotection on 6x4 and 8x4 models

TrimHard wearing cloth to seatsMoulded facia/padded steering wheelCloth covered headlining and rear wallInsulated floor coveringMoulded door/side coverings

SeatingAdjustable air suspended driver’s seat with headrest and 3-point red seat beltAll three fixed passenger seats with headrests and 3-point red seat belts

Standard coloursCab: Arctic WhiteChassis: Nova Grey

Service accessCab tilts to 53°Engine coolant and windscreen wash fluid reservoirfillers behind cabFront panel access to radiator

StowageFour lockers in rear of cab roofClothing stowage to cab rear wallOddments tray on dashboardStorage with bottle holders behind crew seat

ControlsHeater/demister, multiple outlets to: windscreen, foot wells and door windowsRecirculating air switch3-speed fanKeystart with steering lock and immobiliserLeft hand stalk for indicators, main beam, headlamp flasher, horn, 2-speed wipers plus variable intermittent wipe and wash/wipe

Right hand stalk for engine brake, TempoMat/TempoSet and engine speed controlHazard warning light switchLight switch including rear fog lampElectrically operated driver’s window switchAir suspension ride height raiseAir suspension wander leadPanel light dimmerTelligent® maintenance control panelHeated rear view mirrorsParking brake beside driver’s seatInternal operating switches for folding doorExternal operating switch for folding doorFuse box and PSM module behind driver’s seatTraction aid (6x2 models)

Axle load indicatorIndividual axle weights and overall vehicle weight displayed in Telligent® display panel (not NGT tractor)

Protection & FinishCab structure and chassis frame cathodic dip primed and paintedCab panels in corrosion resistant SMC plastic and aluminium

VisibilityFull height laminated windscreen with tinted section to upper edgeElectrically heated rear view mirrorsElectrically adjusted nearside rear view mirrorFront view mirrorWide angle mirrorKerbside mirrorFull height glass panels in folding passenger doorElectrically operated sun blind

RefinementsInterior lights — switch or door operated with night vision facility15A 24v socketElectric driver’s windowCD/radioManually operated steel roof hatchAir conditioned cabCruise control

InstrumentsAdjustable instrument illuminationTelligent® display panel:Ambient temperatureSystem failure warning lightCheck mode (daily checks)Service modeDiagnostic modeInstrument gauges — Coolant temperature — Fuel level — AdBlue level (not NGT) — Engine oil pressure — Brake air pressureRev counterDigital tachographTransmission control and display panel

OptionsParking brake on front axle (not 6x4/8x4)Alternative axle ratio, 6.00:1 (not 6x4/8x4)5 speed Allison transmissionAllison transmission with retarder (standard on NGT)Low roof cab (gives 1400mm nominal interior height) available with folding passenger door (hinged passenger door optional)Engine under protection (4x2 and 6x2 models)Halogen fog lightsHinged passenger door for high cabComfort driver suspension seatSingle crew seat ilo three seatsTwin crew seats ilo three seatsVinyl covered crew seatsOmission of co-drivers seatDownward emitting exhaustVertical SCR exhaust (1824LL only)2 x 220Ah batteriesDeletion of air conditioningGeorge Fischer fixed fifth wheel (NGT tractor)Chassis prepared for high C of G/tipping body (6x2 rear steer)Stabiliser on trailing axle (6x2 rear steer) for Faun RotoPress bodiesShock absorbers with restricted rebound (4x2 and 6x2 rear steer only)Alternative tyre make to factory standardSpare wheel and tyre315/80R 22.5 tyres on 4x2 models to give 7.5 tonne front axle8 tonne front axle on 4x2, 6x2 rear steer and 6x4 modelsRange of factory cab coloursFront bumper with steel corner sectionsPower take off — auto transmissionEngine rear power take off with spline drive (max.output torque 200Nm)Engine rear power take off with flange drive (max.output torque 600Nm) including flexible couplingReversing warning device300 litre steel fuel tank650mm chassis rear overhang

Special CTT OptionsShortening of rear overhangAlternative wheelbase options (300mm increments)5.7m kerbsider model - 600mm wheelbase extension to 5.1m modelRoof beaconsBattery cut off switches on chassisAir bellow pressure reductionFront air coupling headBrake pedal operated retarderPreparation for firefighting vehicle (selected chassis)Preparation for airfield vehicle (selected chassis)Additional CNG tanks behind cab

Issued by: Mercedes-Benz UK Ltd.,Tongwell, Milton Keynes, MK15 8BA. Telephone: (01908) 245000. Fax: (01908) 245093www.mercedes-benz.co.uk/trucks

CV 581 JUNE 2012The contents of this brochure are not binding and the right

is reserved to make modifications without notice.