SZB 19" CABINETStandard universal data communication 19" rack

Intended f or indoor applications.Of f ered in 40 v ariations of size (look ref erence chart),among which 11 v ariations are in constant sale f rom ourwarehouse.Indiv idual conf iguration:

multiple door, panel, roof options f or maximum f lexibility,possibility to join cabinets in a row,lev elling f eet, castor, or plinth options,multiple alternativ e cable entry options (brush, f oam),21" mounting prof iles also possible (in 800 mm widecabinets),indiv idual conf iguration using simple coding.

Wide range of supplementary accessories: shelv es,drawers,f an units, power strips, blanking plates etc.Flexibility in manuf acturing tailor made cabinets.

Scope of deliveryCabinet in basic conf iguration*(cat. no. WZ-SZB-xxx-17AA-11-0000-011):

f rame,saf ety glass f ront door,two side panels,steel rear door shortened with 3 U module panel withbrush strip, lockable,standard roof , raised, with perf orated sides,2 pairs of 19" mounting prof iles,earthing bar and cables,cabinet placed on lev elling f eet.

*) Other conf igurations - see ordering schema.

Technical dataMaterial:Frame 2.0 mm thick sheet steelSide panels 0.8 mm thick sheet steelSteel door solid 1.0 mm thick sheet steel

Steel door with Plexiglas 1.5 mm thick sheet steel,4.0 mm thick PlexiglasGlass door 6.0 mm thick safety glass

Glass door with metal sides 2.0 mm thick sheet steel,6.0 mm thick safety glassMounting profiles 2.0 mm thick sheet steel

Protection degree:IP 20 in accordance with EN 60529 / IEC 529 (does not apply tobrush cable entries). On request, IP 41 can be achiev ed.

SZB cabinet 600 mm wide in thebasic configuration

Construction of the SZB cabinet

Surface finishing:Frame, roof , panels, doors, plinth - textured powder paint, lightgrey (RAL 7035). All other colour options on request.Mounting prof iles - Al-Zn coatedOutriggers f or 800 mm wide 19 racks - galv anised

Maximum load capacity:Base type Maximum weight of equipment mounted in cabinet

levelling feet 600 kgcastors - type 150 150 kgcastors - type 300 500 kg

plinth 600 kg

DESIGN1. Frames post2. Frames bottom plate3. Frames top plate4. Front door5. Side panel6. Rear door or panel7. Roof8. Base (plinth, adjustable feet or castors)9. C-profile10. Mounting profile11. Outrigger12. Knock-out blanking plate

BASE HEIGHTLeveling feet: 25-50 mmPlinth: 100 or 200 mmCastors 150: 108 mmCastors 300: 129 mm

Notes:Cable opening in the top plate of the cabinet is covered with aknock-out blanking plate (12). The same solution can be foundin the roof of the cabinet.Blanking and cable entry plates for openings in the top andbottom plate - see here.

Reference chartTotal width

W [mm]Total depth

D [mm] Reference number

800 800 5 17 145 53 149 153 157 89 101 113600 6 18 146 54 150 154 158 90 102 114

600 800 9 21 147 57 151 155 159 93 105 117600 10 22 148 58 152 156 160 94 106 118Usable height HU[U = 44.45 mm] 45 U 42 U 39 U 36 U 33 U 30 U 27 U 24 U 18 U 15 UFrame height H [mm] 2096 1963 1830 1696 1563 1430 1296 1163 896 763

Note:Cabinet options in the red shaded fields are available in constant supply from ZPAS S.A.s warehouse (this refers to cabinetswith the following configuration: frame, four adjustable mounting profiles, two side panels, front glass door, lockable steelrear door shortened with 3 U module panel with brush strip, standard roof with perforation, four levelling feet, earthing barand earthing cables for the doors and side panels - cat. no. WZ-SZB-xxx-17AA-11-0000-011).Lead time of other cabinets to be agreed upon with ZPAS Sales Department.

Catalogue number

WZ-SZB-XXX-XXXX-XX-XXXX-011Click on the abov e number to see the coding scheme.Click HERE to run SZB cabinet conf igurator.

Ordering instructionWhen ordering the SZB cabinet, please prov ide the appropriate catalogue number accordingto the abov e inf ormation, which specif ies the ov erall dimensions, ty pe of doors, panels, roofand base.

1.

The next step is to specif y catalogue numbers of supplementary accessories (such as:shelv es, blanking plates, power strips, f an units etc. - see pages 73-108). Supplementaryaccessories are deliv ered in separate packaging including f ixing hardware. On request it isalso possible to mount supplementary accessories in the cabinet.

2.

Examples of SZB cabinetsNote: Symbols given in square parenthesis [ ] refer to coding scheme.

SZB cabinet 600 mm wide, frontglass door [1]

SZB 600 mm wide cabinet with frontglass door with metal sides androd-lath lock [Z]

SZB cabinet 600 mm wide, frontsteel door [2]

SZB cabinet 600 mm wide, frontsteel door with Plexiglass [4]

SZB cabinet 800 mm wide, frontsteel door with Plexiglass andperforation [5]

SZB cabinet 800 mm wide, frontsteel door with perforation in thebottom part [3]

SZB cabinet 800 mm wide equippedwith blanking plate, fan unit andshelves

SZB cabinet with expanded sidepanels [F]. The design of this cabinetis based on the SZB 600 x 800 mmframe, while the expanded panels widenthe cabinet to 800 mm.

SZB cabinet 600 mm wide with frontglass door [1]. Right section of thecabinet is made of shortened steel doorand 3 U module panel with brush strip[7].

Steel door shortened and 3 Umodule panel with brush strip [7],mounted in the rear of the cabinet

Steel panel shortened with 2 pcs. of3 U module panels [E], mounted inthe rear of the cabinet

3 U module panel mounted in600 mm wide cabinet

2 pcs. of 3 U module panelsmounted in the 600 mm widecabinet

Roof types for SZB cabinetsNote: Symbols given in square parenthesis [ ] refer to coding scheme.

[1] Standard roof. After removal of knock-outblanking plate from the roof the cable opening can becompleted with brush strip

[2] Roof with extra perforation (top)

[3] Tight roof with IP 41 protection [4] Roof with opening 380 x 210 mm for blanking/cable entryplate 420 x 250 mm (blanking/cable entry plate should beordered separately)

Examples of non-standard SZB cabinets

SZB cabinet with easy adjustment of 19" mountingprofiles

SZB cabinet 42 U height, 800 mm widewith 10 U swing frame. Non-standard version

SZB cabinet 1000 mm wide, double-sectioned. Left section equipped with 19" mounting profiles. Right sectionwith mounting angles in 300 mm spacing. Tailor made.

SZB cabinet 600 mm wide with double-wing door - tailor made

Back to main page