1.ammonium molybdate...1.ammonium molybdate product specification cas number: 13106-76-8 mdl:...

1. ammonium molybdate

Product Specification

CAS Number: 13106-76-8MDL: MFCD00011596Formula: H8MoN2O4Formula Weight: 196.01 g/mol

TEST Specification

Appearance (Color) WhiteAppearance (Form) Powder or Crystals or Chunk(s) or Solid

or Crystalline Chunk(s) or Powder w ith Chunk(s) or Crystals w ithChunk(s)

Gravimetric Analysis 47.2 - 50.7 %% Mo With Ammonium Molybdate

ICP Major Analysis Conf irmedConfirms Molybdenum Component

Purity Meets Requirements99.98% Based On Trace Metals Analysis

Trace Metal Analysis <_ 250.0 ppm

2. anhydrous sodium carbonate

Product Name:Product Specification

CAS Number: 497-19-8MDL: MFCD00003494Formula: CNa2O3Formula Weight: 105.99 g/mol

TEST Specification

Appearance (Color) White

Appearance (Form) PowderSolubility (Color) ColorlessSolubility (Turbidity) Clear

1M, H2OChloride Content <_ 0.05 %Sulfate <_ 0.02 %Insoluble matter <_ 0.1 %Aluminum (Al) <_ 0.001 %Phosphorus (P) <_ 0.02 %Lead (Pb) <_ 0.001 %Iron (Fe) <_ 0.001 %Copper (Cu) <_ 0.0005 %Zinc (Zn) <_ 0.0005 %Calcium (Ca) <_ 0.02 %Magnesium (Mg) <_ 0.005 %Potassium (K) <_ 0.005 %Ammonia (NH4) <_ 0.05 %Titrat ion by HCL >_ 99.0 %

3. Casein


CAS Number: 9000-71-9MDL: MFCD00081481

TEST Specification

Appearance (Color) Off WhiteAppearance (Form) Powder% Loss on Drying <_ 12Nitrogen 13.5 - 15.0 %

4. copper sulphate


CAS Number: 7758-98-7MDL: MFCD00010981Formula: CuO4SFormula Weight: 159.61 g/mol

TEST Specification

Appearance (Color) White to Light GreyAppearance (Form) PowderSolubility (Color) GreenSolubility (Turbidity) Clear to Hazy

100 mg/ml, 5 M HClLoss on Drying <_Titrat ion w ith Na2S2O3 >_

Dry basis

4.5 %99 %

5. disodium hydrogen arsenate


CAS Number: 10048-95-0MDL: MFCD00149179Formula: HAsNa2O4 · 7H2OFormula Weight: 312.01 g/mol

TEST Specification


Appearance (Form) PowderSolubility (Color) ColorlessSolubility (Turbidity) Clear to Slight ly Hazy

100 mg/ml, H2O% Purity (Titrat ion) >_ 98.0Recommended Retest Period -------------------------

4 years

6. gum arabic



TEST Specification

Appearance (Color) White to Faint BeigeAppearance (Form) PowderMoisture Content <_Insoluble Residue <_

15 %0.20 %

Starch Negat iveTannin-bearing gums Negat ive

7. L-Ornithine-HCl


CAS Number: 3184-13-2MDL: MFCD00064562Formula: C5H12N2O2 · HClFormula Weight: 168.62 g/mol

TEST Specification

Appearance (Color) WhiteAppearance (Form) PowderSolubility (Color) Colorless to Very Faint YellowSolubility (Turbidity) Clear

50 mg/mL, H2O1H NMR Spectrum Conforms to StructureCarbon 34.9 - 36.3 %Nitrogen 16.3 - 16.9 %Specif ic Rotat ion 21.8 - 23.2 °

C = 2, 5M HCl, 25 deg CPurity (HPLC) >_ 99 %Cell Culture Test Pass

8. L-Lysine,

≥98% (TLC)

CAS Number 56-87-1

Molecular Weight 146.19

TEST SPECIFICATION

APPEARANCE (COLOR) White to Off White

APPEARANCE (FORM) Powder

PURITY (TLC AREA %) ≥ 98 %

SOLUBILITY (COLOR) Colorless to Very Faint Green-Yellow

SOLUBILITY (TURBIDITY)Clear

SOLUBILITY (METHOD) 100MG/ML WATER

WATER ≤ 12 %

CARBON CONTENT 47.5 TO 50.3 % (ANHYDROUS BASIS)

NITROGEN CONTENT 18.0 TO 19.5% (ANHYDROUS BASIS)

RECOMMENDED RETEST 3 YEARS

RECOMMENDED RETEST PERIOD 36 MONTHS

9. Maltose


CAS Number: 6363-53-7MDL: MFCD00149343Formula: C12H22O11 · H2OFormula Weight: 360.31 g/mol

TEST Specification


Appearance (Form) PowderWater (by Karl Fischer) 4.5 - 6.5 %Infrared spectrum Conforms to StructureImpurity <_

GlucoseImpurity <_

Maltotriose

0.3 %

1.0 %

Solubility (Color) ColorlessSolubility (Turbidity) Clear

(1 M in H2O)Insoluble matter <_Aluminum (AL) <_Phosphorus (P) <_Lead (Pb) <_Iron (Fe) <_Copper (Cu) <_Zinc (Zn) <_Calcium (Ca) <_Magnesium (Mg) <_Sodium (Na) <_Potassium (K) <_Ammonia (NH4) <_

0.1 %0.0005 %0.0005 %0.001 %0.0005 %0.0005 %0.0005 %0.0005 %0.0005 %0.005 %0.005 %0.05

Residue on ignit ion (Ash) <_Chloride Content <_Sulfate (SO4) <_

HPLC w/ pulsed Amperometric >_

0.1 %0.003 %0.005 %99 %

Recommended Retest Period -------------------------6 Years

10. phosphate–citrate buffer


TEST Specification


Appearance (Form) Round TabletDiameter 5/8 inchesTotal Tablet Weight 1225 - 1355 mg/tabpH 4.5 - 5.5

1 Tablet dissolved in 100 mL purif ied water.Dissolution Time <_

* Note: 1 tablet dissolved in 100ml of purif ied water.10 min

11. p-nitrophenylpalmitate (pNPP)


CAS Number: 1492-30-4MDL: MFCD00047732Formula: C22H35NO4Formula Weight: 377.52 g/molStorage Temperature: -20 °C

TEST Specification

Appearance (Color) White to Off-WhiteAppearance (Form) PowderSolubility (Color) Colorless to Faint YellowSolubility (Turbidity) Clear

100 mg/ml, CHCl3Infrared spectrum Conforms to StructureCarbon 67.9 - 72.1 %Nitrogen 3.55 - 3.83 %Purity (TLC) >_ 98 %

12. potassium carbonate


CAS Number: 584-08-7MDL: MFCD00011382Formula: CK2O3Formula Weight: 138.21 g/mol

TEST Specification


Appearance (Form) PowderSolubility (Color) Colorless

Solubility (Turbidity) Clear(1 M in H2O)

Insoluble matter <_Chloride Content <_Aluminum (Al) <_Phosphorus (P) <_Lead (Pb) <_Iron (Fe) <_Copper (Cu) <_Zinc (Zn) <_Calcium (Ca) <_Magnesium (Mg) <_Sodium (Na) <_Ammonia (NH4) <_

0.1 %0.005 %0.0005 %0.0005 %0.001 %0.0005 %0.0005 %0.0005 %0.001 %0.0005 %0.5 %0.05 %

Recommended Retest Period -------------------------3 years

Purity by Titrat ion >_Sulfate (SO4) <_

99.0 %0.02

13. potassium sodium tartrate


CAS Number: 6381-59-5MDL: MFCD00150989Formula: C4H4KNaO6 · 4H2OFormula Weight: 282.22 g/mol

TEST Specification



1 M H2OInsoluble matter <_ 0.1 %Chloride Pass

< or = 0.05%Sulfate Pass

< or = 0.005%Aluminum (AL) <_Phosphorus (P) <_Lead (Pb) <_Iron (Fe) <_Copper (Cu) <_Zinc (Zn) <_Calcium (Ca) <_Magnesium (Mg) <_Ammonia (NH4) <_Titrat ion by HCLO4 >_

0.0005 %0.001 %0.001 %0.0005 %0.0005 %0.0005 %0.001 %0.001 %0.003 %99 %

14. Putrescine dihydrochloride


CAS Number: 333-93-7MDL: MFCD00012526Formula: C4H12N2 · 2HClFormula Weight: 161.07 g/mol

TEST Specification



100 mg/mL, H2OProton NMR spectrum Conforms to StructurePurity (Titrat ion by HClO4) >_Purity (TLC) >_

98 %98 %


15. pyridoxal-5-phosphate (PLP)


CAS Number: 853645-22-4MDL: MFCD00006333Formula: C8H10NO6P · xH2OFormula Weight: 247.14 g/molStorage Temperature: -20 °C

TEST Specification

Appearance (Color) Off-White to Yellow to BeigeAppearance (Form) PowderSolubility (Color) Colorless to Lt. Yellow-GreenSolubility (Turbidity) Clear

50 mg/ml, 1M HClProton NMR spectrum Conforms to StructureLoss on Drying <_ 5.0 %UV/Vis absorbance 4.99 - 5.19

Lambda max 388-389 nm in pH 7.0Wavelength 388 - 389 nmPurity (HPLC) >_ 98 %Recommended Retest Period -------------------------

3 Years

16. sodium borate


CAS Number: 1303-96-4MDL: MFCD00149193Formula: B4Na2O7 · 10H2OFormula Weight: 381.37 g/mol

TEST Specification


Appearance (Form) Powder or CrystalsNote -------------------------

ACS TestsAssay 99.5 - 105.0 %

Titrat ion by NaOHInsoluble matter <_ 0.005 %pH 9.15 - 9.20

of a 0.01 M solut ion at 25 deg CIron (Fe) < = 5 ppmPhosphate (PO4) Pass

< /= 0.001%Sulfate Pass

< /= 0.005%Calcium (Ca) <_ 0.005 %Heavy Metals (as Lead) Pass

< /= 0.001%Chloride (Cl) Pass

< /= 0.001%Recommended Retest Period -------------------------

5 years

17. starch



TEST Specification

Appearance (Color) White to Off-WhiteAppearance (Form) PowderpH 5.0 - 7.5

(2% in H2O)Sensit ivity Test Pass

ACS Sensit ivity TestSolubility Pass

ACS Solubility TestRecommended Retest Period -------------------------

2 years

18. TNBS (2,4,6-trinitrobenzenesulfonic acid)


MDL: MFCD00064382Formula: C6H3N3O9SFormula Weight: 293.17 g/molStorage Temperature: 2 - 8 °C

TEST Specification

Appearance (Color) YellowAppearance (Turbidity) Clear to Slight ly HazyAppearance (Form) LiquidConcentrat ion 4.8 - 5.2 %

(w/v)Suitability Suitable

Suitable for use in the detect ion and quant itat ion of primary amines.

19. Toluene


CAS Number: 108-88-3MDL: MFCD00008512Formula: C7H8Formula Weight: 92.14 g/mol

TEST Specification

Appearance (Color) ColorlessAppearance (Form) LiquidInfrared spectrum Conforms to StructurePurity (GC) >_Residue on Evaporat ion <_Water (by Karl Fischer) <_

99.75 %0.0005 %0.001 %

Note -------------------------For 100 mL unit size, water content may exceed above specif icat ion; not to exceed 0.005%

20. Triton X-100


CAS Number: 9002-93-1MDL: MFCD00132505Formula: (C2H4O)nC14H22O

TEST Specification

Appearance (Color) Colorless to Light YellowAppearance (Form) LiquidSolubility (Color) Colorless to Faint YellowSolubility (Turbidity) Clear to Slight ly Hazy

0.1 mL/mL of H2OAppearance (Clarity) Clear to Slight ly HazyWater (by Karl Fischer) <_Sodium (Na) <_Iron (Fe) <_Potassium (K) <_Heavy Metals <_

1.00 %0.1 %5 ppm0.05 %5.0 ppm

DNAse Detect ion None DetectedRNAse Detect ion None DetectedRecommended Retest Period -------------------------

2 yearsRegistered Trademark Conf irmed

Triton is a registered trademark of Dow Chemical COInfrared Spectrum Conforms to Structure

21. Tyrosine Properties

product line BioUltra

assay ≥99.0% (NT)

optical activity [α]20/D −11.5±1.0°, c = 4% in 1 M HCl

impurities insoluble matter, passes filter test

≤0.5% foreign amino acids

ign. residue ≤0.1%

loss ≤0.2% loss on drying, 20 °C (HV)

mp >300 °C (dec.) (lit.)

solubility 1 M HCl: 25 mg/mL, clear, colorless (hot)

anion traces chloride (Cl-): ≤400 mg/kg

sulfate (SO42-): ≤300 mg/kg

cation traces Al: ≤5 mg/kg

As: ≤0.1 mg/kg

Ba: ≤5 mg/kg

Bi: ≤5 mg/kg

Ca: ≤10 mg/kg

Cd: ≤5 mg/kg

Co: ≤5 mg/kg

Cr: ≤5 mg/kg

Cu: ≤5 mg/kg

Fe: ≤5 mg/kg

K: ≤50 mg/kg

Li: ≤5 mg/kg

Mg: ≤5 mg/kg

Mn: ≤5 mg/kg

Mo: ≤5 mg/kg

NH4+: ≤200 mg/kg

Na: ≤200 mg/kg

Ni: ≤5 mg/kg

Pb: ≤5 mg/kg

Sr: ≤5 mg/kg

Zn: ≤5 mg/kg

absorption absorption0.5M/310 nm, 1 M HCl cut-off

22. 1-pentanol


CAS Number: 71-41-0MDL: MFCD00002977Formula: C5H12OFormula Weight: 88.15 g/mol

TEST Specification

Appearance (Color) Colorless

Appearance (Form) LiquidRefract ive index at 20 ° C 1.407 - 1.411Infrared spectrum Conforms to StructureProton NMR spectrum Conforms to StructurePurity (GC) >_Color Test <_Water (by Karl Fischer) <_Residue on Evaporat ion <_

99.0 %30 APHA0.50 %0.003 %

Miscellaneous Assay PassAcids and Esters: < 0.075 mEq/g

Carbonyl compounds <_As Formaldehyde

0.1 %

Meets ACS Requirements Current ACS Specif icat ion

23. Phospholipase D assay kit


Storage Temperature: -20 °C

TEST Specification

Suitability Suitablesuitable for detect ion of phospholipase D act ivity

25. Goat anti-mouse IgG Properties

format Unconjugated

application(s) ELISA

Immunoprecipitation

Western Blotting

clone Polyclonal Antibody

concentration 2 mg/mL

host Goat

species reactivity Mouse

material size 2 mg

shipped in wet ice

storage conditions Store at +2-8°C in undiluted aliquots for up to six months.

Description

Physical form

Liquid in 0.02M Phosphate Buffer, 0.25M Sodium Chloride and 0.1% Sodium Azide. Filteredthrough a 0.45 micron membrane filter.

Specificity

Reacts with Mouse IgG gamma chain, as well as the light chains from all mouseimmunoglobulin classes.Monospecific on IEP against whole mouse serum.

Immunogen

Highly purified Mouse IgG isolated from pooled normal mouse serum.

Quality Assurance

Single band on IEP at a concentration of 10 mg/mL when run against rabbit anti goat wholeserum.

26. Anti-Mouse IgG (whole molecule)


MDL: MFCD03791275

Storage Temperature: 2 - 8 °C

TEST Specification


Appearance (Form) SuspensionBinding Capacity / ml PGV >_

Minimum 0.4 mg Mouse IgG bound and eluted per ml of settled resin.0.4

ml suspension/ml packed gel 1.8 - 2.0

27. Empty polypropylene SPE Tube with PE frits, 20 μm porosity

Polypropylene SPE tubes with PE frits, 20μm porosity Properties

Empty polypropylene SPE tube with PE frits, 20 μm porosity

material polypropylene

feature includes polyethylene frits (20 μm pore size)

packaging pk of 100

volume 6 mL

pore size 20 μm

28 HEPES Buffer 1M for cell culture, pH 6.8 – 8.2

Alternate Names N-(2-Hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid); 4-(2-Hydroxyethyl)-1- piperazineethanesulfonic acid

Application Notes

HEPES buffer commonly used in cell culture media. Theaddition of 10–25 mM HEPES provides extra bufferingcapacity when cell culture requires extended periods ofmanipulation outside of a CO<sub>2</sub> incubator. HEPESis a good buffering choice for many cell culture systemsbecause it is membrane impermeable, has limited effect onbiochemical reactions, is chemically and enzymatically stable,and has very low visible and UV light absorbance. HEPES isthe buffer of choice in a protein deposition technique inelectron microscopy because it did not affect metal substrates.HEPES has been evaluated and shown to be suitable for usewith Ampholines in generating pH gradients less than 1 pHunit wide for isolectric focusing applications. HEPES is therecommended buffer for the glutamate binding assay becauseit prevents binding to non-receptor materials.

Concentration 1 M

Formulation Details Liquid | HEPES: 238300.00 mg/liter

Grade Cell Culture Grade

Applications Mammalian Cell Culture

Pack Size 100 mL

pH 6.8 to 8.2

Physical Appearance Clear; Colorless Solution

Preparation Method

A buffer solution of HEPES can be prepared by any of severalmethods. The free acid can be added to water, then titratedwith approximately one-half mole equivalent of sodiumhydroxide or potassium hydroxide to the desired pH. A simplemixing table for preparing 0.05 M HEPES/NaOH has beenpublished. Alternatively, equimolar concentrations of HEPESand of HEPES sodium salt can be mixed in approximatelyequal volumes and back-titrate with either solution to theappropriate pH. The sodium salt can be titrated with HCl toyield a half-equivalent of sodium chloride; however, theaddition of the ionic strength will change the osmolality of thesolution. Most solutions of HEPES hemisodium will dissolve inwater forming a pH at 7.5 with little to no adjustment.

Presentation HEPES: 238300.00 mg/liter | Solution

Product FamiliesDescription

HEPES (N-2-hydroxyethylpiperazine-N-2-ethane sulfonic acid)is a general purpose zwitterionic organic chemical bufferingagent which does not bind magnesium, calcium,manganese(II) or copper (II) ions.

SolubilitySoluble at 1% solution in water at 25 °C. A 1 M solution isclear and colorless. At 0 °C, a saturated solution of the freeacid is reportedly 2.25 M.

Sterility Sterile | Solutions may be autoclaved under standardconditions.

Storage and HandlingStore at Room Temperature (15-30°C). HEPES is lightsensitive when added to media. Solutions should be stored inthe dark to avoid possible toxic effects.

Typical WorkingConcentration Buffer strength for cell culture applications is usually in the

range of 10 to 25 mM. Studies have indicated that 20 mM

HEPES is the most satisfactory concentration of the bufferwhen both Hanks' and Earle's solutions are used.

29. BIZOU 7ml, WHITE CAP/NO LABEL/ ASEPTICALLY PRODUCED

Bizou 7ml white cap no label aseptically produced Properties

material PE cap

mfr. no. Sterilin 129A

H 50.2 mm

cap diam. 22.5 mm

volume 7 mL

General description

Disposable plastic (PS) bijou available without label.

Aseptically manufactured under clean room conditions (class 7 ISO 14644) to excludemicrobiological contamination

32. Formaldehyde 37%


MDL: MFCD00003274Formula: CH2OFormula Weight: 30.03 g/mol

TEST Specification

Appearance (Color) ColorlessAppearance (Form) LiquidInfrared Spectrum Conforms to StructureColor Test <_ 10 APHATitrat ion by H2SO4 36.5 - 38.0 %Titratable Acid (meq/g) <_Residue on ignit ion (Ash) <_Chloride (Cl) <_Iron (Fe) <_Heavy Metals <_

by ICP-OES

0.0060.005 %5 ppm5 ppm5 ppm

Sulfate (SO4) < = 0.002%Note Confirmed

Stabilized w ith 10% to 15% MethanolMeets ACS Requirements Current ACS Specif icat ionRecommended Retest Period -------------------------

2 Years

33. Acetic acid (glacial) 100%

1.00063.2500 Acetic acid (glacial) 100% anhydrous for analysis EMSURE® ACS,ISO,Reag. Ph Eur

Assay (alkalimetric)

Specification

~ 99.8 %

Identity passes test

Color ,.; 10 Hazen

Acetaldehyde ,.;2 ppm

Acetic anhydride

Titratable base

s 100

s 0.0004

ppm

meq/g

Solidification temperature ~ 16.3 °C

Chloride (CI) ,.;0.4 ppm

Phosphate (P04) ,.;0.4 ppm

Heavy metals (as Pb) ,.; 0.5 ppm

Sulfate (S04) ,.;0.4 ppm

Ag (Silver) ,.; 0.005 ppm

AI (Aluminium) ,.; 0.020 ppm

As (Arsenic)

Au (Gold)

B (Boron)

Ba (Barium)

Be (Beryllium)

Bi (Bismuth)

Ca (Calcium)

Cd (Cadmium)

s 0.010

s 0.010

s 0.100

s 0.010

s 0.005

s 0.050

s 0.100

s 0.020

ppm

ppm

ppm

ppm

ppm

ppm

ppm

ppm

Co (Cobalt) ,.; 0.010 ppm

Cr (Chromium) ,.; 0.020 ppm

Cu (Copper) ,.; 0.010 ppm

Fe (Iron)

Ga (Gallium)

Ge (Germanium)

Hg (Mercury)

In (Indium)

s 0.050

s 0.050

s 0.020

s 0.005

s 0.050

ppm

ppm

ppm

ppm

ppm

K (Potassium) ,.; 0.100 ppm

Li (Lithium) ,.; 0.010 ppm

Mg (Magnesium) ,.; 0.050 ppm

Mn (Manganese) ,.; 0.010 ppm

Mo (Molybdenum) ,.; 0.010 ppm

Na (Sodium) ,.; 0.200 ppm

Ni (Nickel)

Pb (Lead)

Pt (Platinum)

Sn (Tin)

Sr (Strontium)

Ti (Titanium)

s 0.020

s 0.010

s 0.100

s 0.050

s 0.010

s 0.050

ppm

ppm

ppm

ppm

ppm

ppm

TI (Thallium) :5 0.020 ppm

V (Vanadium) :5 0.010 ppm

Zn (Zinc) :5 0.030 ppm

Zr (Zirconium) :5 0.050 ppm

Substances reducing potassium dichromate passes test

Substances reducingpermanganate

potassium :5 20 ppm

Evaporation residue :55 ppm

Water :5 0.2 %

Dilution test passes test

Minimum shelf life: see product label

34. Anti-rabbit IgG whole molecule – HRP



TEST Specification

Appearance (Form) LiquidAppearance (Turbidity) ClearAppearance (Color) BrownIgG Concentrat ion (OD 280nm) 4.0 - 11.0 mg/mlMolar Rat io P/E 0.6 - 1.5ELISA - Titer 1:30,000-1:40,000WB-Cell Line/Tissue Extract Hela CellsWB Titer 1:80,000-1:160,000IHC - Tissue Human TonsilIHC - Fixat ion FFPE-Formalin Fixed Paraff in EmbeddedIHC - Titer 1:200-1:400Recommended Retest Period -----------

2 Years

35. Anti-rabbit IgG whole molecule - biotin


MDL: MFCD00162783

Storage Temperature: 2 - 8 °C

TEST Specification

Appearance (Turbidity) ClearAppearance (Color) Colorless

Appearance (Form) Solut ionProtein Content 0.1 - 2.0 mg/mlELISA Titer >_

Minimum 1:20,000 working dilut ion versus 5 µg/ml normal rabbit IgG.20000

36. Anti-mouse IgG whole molecule - HRP


MDL: MFCD00162644


TEST Specification

Appearance (Turbidity) ClearAppearance (Color) Colorless to Light BrownAppearance (Form) LiquidProtein Content 0.50 - 3.00 mg/ml

Conjugate concentrat ion prior to the addit ion of BSADirect ELISA Titer-Mouse IgG 10000 - 30000

of a 5 µg/ml coat of Mouse IgG

37. Anti-mouse IgG whole molecule - biotin


MDL: MFCD00162641


TEST Specification

Appearance (Turbidity) ClearAppearance (Color) Colorless

Appearance (Form) LiquidProtein Content 0.1 - 2.0 mg/mlELISA Titer >_

Minimum 1:20,000 working dilut ion versus 5 µg/ml normal mouse IgG.20000

/8

48.1.5

38. Coomassie Brilliant Blue R-250 Staining Solution

No specifications

39 Silver Stain Plus™ Kit

Components:Development Accelerator ReagentFixative Enhancer ConcentrateSilver Complex SolutionReduction Moderator SolutionImage Development Reagent

No further specifications

40. Immuno-blot PVDF membrane for protein

Immun-Blot PVDF Membrane, Roll, 26 cm x 3.3 m, bulk membrane for high binding (150–160µg/cm2) immunoblotting.

Specifications

Material type PVDF

Pore size, µm 0.2

Format Roll

Dimensions, cm 26 x 3,300

41. Anti-European sea bass (Dicentrarchus labrax) IgM monoclonal antibody

No specifications

42. Hydrogen Peroxide


CAS Number: 7722-84-1MDL: MFCD00011333Formula: H2O2Formula Weight: 34.01 g/molStorage Temperature: 2 - 8 °C

TEST Specification

Appearance (Color) Colorless

Appearance (Form) LiquidTitrat ion w ith KMnO4 29.0 - 32.0 %

Wt% H2O2Residue on Evaporat ion <_Color Test <_Chloride (CL) <_Iron (Fe) <_Heavy Metal <_

As LeadAmmonium <_Nitrate (ppm) <_Phosphate <_Sulfate <_Titrable Acid (meq/g) <_

0.002 %10 APHA2 ppm0.5 ppm1 ppm

5 ppm2 ppm2 ppm5 ppm0.0006


Meets ACS Requirements Current ACS Specif icat ion

44. Polyethylene Glycol MW 8,000


CAS Number: 25322-68-3MDL: MFCD00081839Formula: (C2H4O)nH2O

TEST Specification

Appearance (Color) WhiteAppearance (Form) PowderSolubility (Color) ColorlessSolubility (Turbidity) Clear to Slight ly Hazy

100 mg/mL, H2OBrookf ield Viscosity 24 - 32 cps

25% w/w, H2O, 25 deg CDNAse, Exonuclease Detect ion None DetectedRNAse Detect ion None DetectedNICKase,Endonuclease Detect ion None DetectedRecommended Retest Period -------------------------

3 Years

45. N,N-Methylenebisacrylamide


CAS Number: 110-26-9MDL: MFCD00008625Formula: C7H10N2O2Formula Weight: 154.17 g/mol

TEST Specification

Appearance (Color) WhiteAppearance (Form) PowderSolubility (Color) ColorlessSolubility (Turbidity) Clear to Hazy

80 mg/mL, MeOHA290 UV absorbance <_

1% in H2OConduct ivity <_

of a 2% Solut ionMicromhos

Free Acid <_Free carboxylic acid

0.2

10

0.05 %

Suitability SuitableSuitable for use as a reagent in electrophoresis

DNAse, Exonuclease Detect ion None DetectedRNAse Detect ion None DetectedProtease Detect ion None DetectedChloride (Cl) Pass

< or = 50 ppmIron (Fe) <_Magnesium (Mg) <_Calcium (Ca) <_Chromium (Cr) <_Manganese (Mn) <_Cadmium (Cd) <_

5 ppm5 ppm10 ppm5 ppm5 ppm5 ppm

TEST Specification

Cobalt (Co) <_Copper (Cu) <_Zinc (Zn) <_Nickel (Ni) <_Sulfur <_

total sulfur as SO4: < or = 50ppmLead (Pb) <_Potassium (K) <_Sodium (Na) <_Purity (HPLC) >_

5 ppm5 ppm5 ppm5 ppm0.0017 %

5 ppm50 ppm50 ppm99.5 %

47. Poly-L-Lysine solution, 0,1%


MDL: MFCD00165424

TEST Specification

Appearance (Color) ColorlessAppearance (Form) Solut ionAppearance (Turbidity) Clear

Essent ially free of part iclesPerformance Conforms

Tissue sect ions remain aff ixed to slides throughout performance and are w ithin acceptable limitsExpirat ion Date Period -------------------------

18 months

48. Bovine serum albumin, Fraction V, lyophilized powder

No specifications

50. Protein assay dye reagent concentrate

No specifications

51. 2,2’-bipyridyl

Product Name:

Formula: C10H8N2Formula Weight: 156.18 g/mol

TEST Specification

Appearance (Color) White to Off-WhiteMay Form Yellow Chunks Over Time With No Loss of Purity

Appearance (Form) Conforms to RequirementsCrystalline Powder, Crystals, Powder or Granular Powder

Inf rared spectrum Conforms to Structure

Purit y (Titrat ion by HCL04) 99.0- 101.0 %

Purity (GC) 99.0 %

Solubility (Turbidity) Clearc = 100 mg/ml; Ethanol

Solubility (Color) Colorless to Faint Yellow

1.ammonium molybdate...1.ammonium molybdate product specification cas number: 13106-76-8 mdl:...

Documents