1xa air interface technology on cmue feature description 13627_22 & 13627_6

Title page

Alcatel-Lucent CDMA Network | Releases 36.1 and 37.1

FID 13627.22 and FID 13627.6

1xAdvanced Air Interface Technology on CMU-E Feature Description

401-612-972

Issue 3

February 2012

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements


Legal notice

Legal notice

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective

owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Copyright © 2012 Alcatel-Lucent. All rights reserved.

Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside

Alcatel-Lucent without its written authorization.

Not to be used or disclosed except in accordance with applicable agreements.




Contents

About this document

Purpose ............................................................................................................................................................................................. ixix

Reason for reissue ........................................................................................................................................................................ ixix

Intended Audience ........................................................................................................................................................................ ixix

Technical support .......................................................................................................................................................................... ixix

How to comment ........................................................................................................................................................................... ixix

1 Introduction to 1xAdvanced Air Interface Technology on CMU-E feature

Overview ...................................................................................................................................................................................... 1-11-1

Feature Summary ...................................................................................................................................................................... 1-21-2

Impact on User Interfaces ...................................................................................................................................................... 1-41-4

Availability .................................................................................................................................................................................. 1-41-4

Prerequisites ................................................................................................................................................................................ 1-41-4

2 Feature Description

Overview ...................................................................................................................................................................................... 2-12-1

1x Advanced Air Interface Technology on CMU-E Feature ...................................................................................... 2-12-1

3 Impact on the RC/V subsystem

Overview ...................................................................................................................................................................................... 3-13-1

Recent Change and Verify Forms ....................................................................................................................................... 3-13-1

4 Impact on service measurements

Overview ...................................................................................................................................................................................... 4-14-1

Service Measurements ............................................................................................................................................................ 4-14-1

5 Impact on Per Call Measurement Data

Per Call Measurement Data .................................................................................................................................................. 5-15-1

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1

Issue 3 February 2012



iii

6 Impact on Status Display Pages and Technician Interface

Overview ...................................................................................................................................................................................... 6-16-1

Impact on Status Display Pages ........................................................................................................................................... 6-16-1

Impact on Technician Interface ............................................................................................................................................ 6-36-3

7 Feature Implementation

Overview ...................................................................................................................................................................................... 7-17-1

Feature Activation ..................................................................................................................................................................... 7-27-2

Provisioning cell2 form for 1xAdvanced Air Interface Technology on CMU-E feature ............................... 7-37-3

Procedure to configure CMU-E using btseqp form ...................................................................................................... 7-77-7

Provisioning the cgsa form for 1xAdvanced Air Interface Technology on CMU-E feature ....................... 7-127-12

Provisioning the ecp form for 1xAdvanced Air Interface Technology on CMU-E feature ........................ 7-147-14

Provisioning the ecp3g form for 1xAdvanced Air Interface Technology on CMU-E feature ................... 7-187-18

Provisioning the cell3g form for 1x Advanced Air Interface Technology on CMU-E feature .................. 7-247-24

Provisioning the ceqface form for 1xAdvanced Air Interface Technology on CMU-E feature ................ 7-357-35

Provisioning the ceqface3g form for 1xAdvanced Air Interface Technology on CMU-E feature ........... 7-407-40

8 Related Documentation

Overview ...................................................................................................................................................................................... 8-18-1

Related Documentation .......................................................................................................................................................... 8-18-1

A Abbreviations

Overview ..................................................................................................................................................................................... A-1A-1

Introduction ................................................................................................................................................................................ A-1A-1

Index

Contents

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

iv Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


List of tables

3-1 Related RC/V forms ................................................................................................................................................. 3-13-1

3-2 Related fields in the btseqp form ......................................................................................................................... 3-23-2

3-3 Related fields in the cell2 form ............................................................................................................................ 3-33-3

3-4 Related fields in the cgsa form ............................................................................................................................. 3-43-4

3-5 Related fields in the ecp form ............................................................................................................................... 3-53-5

3-6 Related fields in the ecp3g form .......................................................................................................................... 3-63-6

3-7 Related fields in the cell3g form ........................................................................................................................ 3-113-11

3-8 Related fields in the ceqface form ..................................................................................................................... 3-173-17

3-9 Related fields in the ceqface3g form ................................................................................................................ 3-183-18

7-1 Fields to be populated in the cell2 form ............................................................................................................ 7-37-3

7-2 Fields to be populated in the btseqp form ......................................................................................................... 7-87-8

7-3 Fields to be populated in the cgsa form .......................................................................................................... 7-127-12

7-4 Fields to be populated in the ecp form ............................................................................................................ 7-147-14

7-5 Related fields in the ecp3g form ........................................................................................................................ 7-187-18

7-6 Related fields in the cell3g form ........................................................................................................................ 7-247-24

7-7 Related fields in the ceqface form ..................................................................................................................... 7-367-36

7-8 Related fields in the ceqface3g form ................................................................................................................ 7-407-40

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




v

List of tables

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

vi Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


List of figures

6-1 Cell Site Status Summary Page ............................................................................................................................ 6-26-2

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




vii

List of figures

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

viii Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


About this documentAbout this document

Purpose

This document describes the 1xAdvanced Air Interface Technology on CMU-E feature

and associated feature functionalities.

Reason for reissue

This is the third issue of this document. The following chapters are updated to address

minor corrections:

• Chapter 1, “Introduction to 1xAdvanced Air Interface Technology on CMU-E feature”

• Chapter 6, “Impact on Status Display Pages and Technician Interface”

Intended Audience

This document is intended for technicians, engineers, and system administrators who

implement or maintain the 1xAdvanced Air Interface Technology on CMU-E feature in a

CDMA2000® network.

Technical support

To obtain technical support, documentation, and training or submit feedback

The Online Customer Support (OLCS) web site (http://support.alcatel-lucent.com/)

provides access to technical support, related documentation, related training, and

feedback tools. The site also provides account registration for new users.

How to comment

To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-

lucent.com/comments/) or e-mail your comments to the Comments Hotline

([email protected]).

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




ix

http://support.alcatel-lucent.com/

http://infodoc.alcatel-lucent.com/comments/



mailto:[email protected]

mailto:[email protected]

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

x Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


1 1Introduction to

1xAdvanced Air Interface

Technology on CMU-E

feature

Overview

Purpose

This chapter provides an introduction to the 1xAdvanced Air Interface Technology on

CMU-E feature and associated feature functionalities. It also provides information on

their affect on user interfaces, availability, and prerequisites for implementation.

Feature Identifier

The unique Feature Identifier (FID) assigned to this feature is 13627.22.

Contents

Feature Summary 1-2

Impact on User Interfaces 1-4

Availability 1-4

Prerequisites 1-4

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




1-1

Feature Summary

Introduction

This feature delivers hardware and software to support new 1x Advanced (1xA) air

interface technology. This feature introduces a new channel board (CMU-E) that is based

on QC CSM-8700 ASIC and new 3GPP2 Rev E standards.

1x Advanced provides air interface capacity improvement that can go up to 83 Erlang in

R36.1 per carrier for 100% penetration of new terminals. This increase in capacity allows

the customer to consolidate as many as three regular 3G1x carriers into a single 1xA

carrier.

Benefits

This feature provides significant benefits for CDMA 3G1x customers. Some of which are

as listed:

• The critical benefit of 1x Advanced technology is to use the air interface improvement

to consolidate 3G1x voice traffic into fewer carriers. 1xA gain of spectral efficiency

on the order of more than 3 times with respect to 3G1X EVRC, can be used by the

operators to accommodate other 3G and 4G technologies or data growth. For instance,

1xA provides spectrum preservation and allows a broader bandwidth for LTE

deployment. 1xA can benefit the customer in markets that are spectrum constrained,

allowing the customer to continue serving voice customers while offloading data

traffic to LTE.

• 1x Advanced simplifies the customer's RF planning due to fewer number of carriers

that need to be handled by the user’s OA&M provisioning systems.

• By integrating 1x Advanced, the customer also benefits from greener power

consumption. 1x Advanced offers reduction in cell site power consumption due to the

fewer numbers of 3G1x carriers needed to support the same overall voice traffic.

Furthermore, reduction on the transmit power of the existing and new mobiles can be

achieved.

• 1x Advanced provides an average of 2dB of Reverse Link budget improvement

through Interference Cancellation supported on the CMU-E board. This improvement

can be used for coverage improvement for existing users, or for increased air interface

capacity for users that are Reverse Link capacity limited; 1x Advanced can improve

the call quality and reduce the call drop rate for those calls that are RL limited.

Introduction to 1xAdvanced Air Interface Technology on

CMU-E feature

Feature Summary

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

1-2 Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


• New 1x Advanced devices supporting new Radio Configurations and Mobile Receive

Diversity (MRD) enables operators to almost triple the voice capacity immediately

after the channel upgrade. When 100% dual antenna handsets penetration is reached

on the service provider network, it is estimated that a capacity gain of a factor of 3.5

times can be obtained. When the market is limited to new single antenna handsets that

are 1x Advanced compatible, the capacity gains are a factor of 2.15 times.

• 1x Advanced is backward compatible with previous revisions of 3G1x and therefore

the new channel board supports the 3G1x traffic also.

Issues and Limitations

Following are a couple of limitations identified for this feature:

• The CMU-E board is limited to support 6SC (1C-6S, 2C-3S, 6C1S).

• The CMU-E board is limited to 512 CEs on the 1st release (R36.1). The full hardware

capability of 1024 CEs will be enabled on a second release.

Note: The limitation to 512 CEs is removed in R37 when the second core of the

CMU-E processor is turned ON. After R37 feature- 1xAdvanced - CMU-e Expansion

to support 2C 1xA (FID13627.6) is deployed the number of CEs that can be

provisioned is 1024.

• The CMU-E support of two 1xA carriers in 3-sectors is specific to a 2 branch Receive

Diversity configuration. When 4 branch Receive Diversity is deployed, the CMU-E

supports one 1xA carrier in 3-sectors.

• Assigning the same 1xA carrier number to multiple CMU-Es for CE pooling is not

allowed. However, CMU-Es configured under different CDMs can be assigned the

same carrier number.

• Assigning of legacy 3G1x carriers to the CMU-E is not allowed. Carrier Type must

be 1xA.

• Cross CMU Technology CE Pooling is not allowed (CMU-E with CMU-IVB and

CMU-V).

• In most CMU-E configured cells routine diagnostics RTDIAG configurations will

skip removing the CMU-E for testing due to OOS limits. Board level diagnostics can

be run using the TICLI command DGN UCL.

• TICLI Move: OC, overhead channels, is not allowed with CMU-E.


CMU-E feature

Feature Summary

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




1-3

Impact on User Interfaces

Overview

The following are the user interfaces affected by the 1xAdvanced Air Interface

Technology on CMU-E feature:

User interface Feature affect

RC/V subsystem See Chapter 3, “Impact on the RC/V subsystem”.

Service measurements See Chapter 4, “Impact on service measurements”.

PCMD See Chapter 5, “Impact on Per Call Measurement Data”

SDP and TI See Chapter 6, “Impact on Status Display Pages and

Technician Interface”

Availability

Release Availability

The 1xAdvanced Air Interface Technology on CMU-E feature is available in Release 36.1

and later.

Market Availability

The 1xAdvanced Air Interface Technology on CMU-E feature is available in all markets.

Prerequisites

Introduction

The 1xAdvanced Air Interface Technology on CMU-E feature has the following

prerequisites.

Supported technologies

The 1xAdvanced Air Interface Technology on CMU-E feature is supported in the

following air-interface technologies:

• CDMA Cellular

• CDMA PCS


CMU-E feature

Impact on User Interfaces

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


HLR configuration

The 1xAdvanced Air Interface Technology on CMU-E supported by both the Integrated

Home Location Register (IHLR) configuration and the Stand-alone Home Location

Register (SHLR) configuration.

Software requirements

The 1xAdvanced Air Interface Technology on CMU-E feature requires all its feature

functionalities active. For details on the feature functionalities, see “Feature Summary”

(p. 1-2).

• Cell release software upgrade (new standard feature provided with the BRSS is

activated if the customer has purchased the new BTS 1xAdvanced channel card).

• License software per 32 CE increments.

• ECP release software upgrade – SW upgrade on the ECP to integrate 1xAdvanced.

• ECP DAP migration feature (R28.0 FID-12854.0) has to be activated.

Hardware requirements

The CMU-E feature requires the standard hardware in a CDMA wireless network and the

following additional hardware:

• CMU-E board

Note: The new channel board (CMU-E) is based on QC CSM-8700 ASIC and new

3GPP2 Rev E standards.

• 1x Advanced CMU-E supported on 9218/9228, 9216/9226, 9222, 9224, 9234 and

equivalent BTS.

• URC-II required at a minimum.

The 1xAdvanced Air Interface Technology on CMU-E feature requires the following

mobile units:

• New dual-antenna handset based on advanced QLIC – most beneficial for capacity

gain or Single antenna handsets with standard changes – less Erlang capacity gain

than dual antenna.

• 100% dual handsets penetration required to reached the full capacity gain.

1x Advanced feature requires mobiles supporting new Radio Configuration (RC)

introduced by CDMA2000 Rev E (RC 8 on the Reverse Link and RC 11 on the Forward

Link). These mobiles are referred to as 1xA mobile. Legacy mobiles that do not support

the new RC is supported as backward compatible in 3G1x mode previously defined RC in

CDMA2000 standard revisions.

Note: 1. Mobiles using P_REV < 12 is supported as 1xA mobiles, as long as they

support the new RC 8 and RC 11.


CMU-E feature

Prerequisites

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




1-5

2. Mobiles are required to support the band-class(es) allowed by each 1xA feature; i.e.

13627.22 and 13627.6 supports testing on BC1 and BC0 only.

Interface requirements

1x Advanced provides air interface capacity up to 83 Erlang per carrier for 100%

penetration of new terminals. This allows the customer to consolidate as many as three

regular 3G1x carriers into a single 1xA carrier.

Signaling requirements

The 1xAdvanced Air Interface Technology on CMU-E feature requires ANSI-41,

IS-2000E, and IS-1149 signaling.

Networking requirements

The 1xAdvanced Air Interface Technology on CMU-E feature does not impact the 3G 1X

network configuration.

System requirements for Software licensing

This feature defines new configuration licenses (CMU-E) for all Enhanced CMU packs.

The CMU-E license provides the Channel Element (CE) capacity for an entire MSC in 32

CE blocks. The new license is a system configuration licenses enforced via provisioning

and supports the same capabilities as other configuration licenses enforced via

provisioning. The new CMU-E license is supported on all CDMA configurations for

9218/9228, 9216/9226, 9222, 9224, 9234 and equivalent BTS.

The CMU-E configuration license is defined with the following properties:

The CMU-E license supports the same capabilities as existing configuration licenses and

is supported on all CDMA configurations.


CMU-E feature

Prerequisites

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


2 2Feature Description

Overview

Purpose

This chapter provides detailed information on the functionality, benefits, and the

operation of the 1xAdvanced Air Interface Technology on CMU-E feature and associated

feature functionalities.

Contents

1x Advanced Air Interface Technology on CMU-E Feature 2-1

1x Advanced Air Interface Technology on CMU-E Feature

Introduction

This feature delivers Hardware and Software to support new 1x Advanced (1xA) air

interface technology. This feature introduces a new channel board (CMU-E) that is based

on QC CSM-8700 ASIC and new 3GPP2 Rev E standards. CMU-E can support 2 Carriers

on a 3S cell.

Functionalities

This feature comprises several improvements over 3G1x, some of these enhancements

have been already available on previous standard revisions. A list of functionalities are as

follows:

• Quasi-Orthogonal Function (QOF): This allows extending the number of usable

Walsh Codes per carrier.

• Forward Link Interference Cancellation (or QLIC, Qualcomm proprietary feature).

This allows reducing interference on the Forward link. This functionality is deployed

on the terminal side and it has been implemented before 1x Advanced, it has been

enhanced on the 1xA to QLIC+ in new mobiles.

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




2-1

• Mobile Receive Diversity (MRD): This allows improved Forward Link capacity by

using dual-receive antennas on the terminals.

• RL Interference Cancellation (RLIC): Allows the BTS to reduce reverse link

interference.

Supported Base stations

Introduction of 1x Advanced interface requires deployment of the new 1x Advanced

CMU (CMU-E), which is supported on the following base stations listed below:

• 9218 Macro (formerly Modcell 4.0)

• 9218 Macro HD (formerly HD 4.0)

• 9228 Macro (formerly Modcell 4.0B)

• 9228 Macro HD (formerly HD 4.0B)

• 9228 Macro MCPA-D (formerly BTS 8440D)

• 9228 Macro LP (formerly BTS 8420 and/or "Digital Host")

• 9228 Macro IN

• 9216 Compact

• 9216 Compact LX/Distributed

• 9226 Compact

• 9224 Sub-Compact

• 9224 Sub-Compact EN

• 9223 Ultra-Compact

• 9222 Micro

• 9222 Micro Distributed

• 9234 d2U Distributed

• 9927 MMBTS

• 9928 MMBTS

Impact on 3G1x Cell Site Elements

Introduction of 1x Advanced requires deployment of the new 1xA CMU (CMU-E), which

is supported on the BTS listed in the above section. The CMU-E is capable of supporting

up to 330 voice call on 512 CEs that can be provisioned by the service provider in chunks

of 32 CEs. In comparison, the current CMU-V card supports up to 256 voice calls CEs,

which equates to approximately 190 3G1x voice calls.

The CMU-E BTS channel card supports:

• Up to 330 voice calls

• 2xRx Div (4xRx Div on a later release)

• 3 sectors x 2 carriers, 6 sectors x 1 carrier or 1 sector x 6 carriers

Feature Description 1x Advanced Air Interface Technology on CMU-E Feature

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


• Cell Radius of up to 125km

• Quasi Orthogonal Functions (QOF)

• Reverse Link Interference Cancellation (RLIC), supporting both TIC and PIC

• Forward Link Interference Cancellation ( QLIC+ or Advanced QLIC)

• RC8 and RC11 implementation (in addition to legacy RC defined in previous

cdma2000 rev)

• Changes to FL/RL Power Control Rates (400Hz and 200Hz)

• Early decoding of frame, also referred to as Frame Early termination (for voice)

• Forward Link ACK channel requests for Frame Early Termination

Impact on ECP and other RAN elements

Additional software changes in the BTS, ECP, and OA&M sub-systems are required to

support 1x Advanced. An upgrade to the relevant cell release and ECP release is

necessary to integrate 1x Advanced.

The customer must has to upgrade to the corresponding cell and ECP release in order to

support 1x Advanced . The new 1x Advanced feature is activated if the customer has

implemented the BTS 1x Advanced CMU-E channel card. 1xA delivery under

FID-13627.22 is a Standard feature in the Alcatel-Lucent development program.

The following changes are included on the Cell and ECP release load that includes 1x

Advanced:

• ECP Call Processing- 1x Advanced involves the support for new Radio

Configurations (RC8 and RC11). The new RCs are implemented in ECP-Cell

Interface messages at call setup and handoff. Support for the new RCs in the ANSI-41

handoff message are also implemented.

• Dynamic Power Control - Forward and Reverse Power Control changes for RC11

and RC8 are implemented. The main improvement achieved by 1xA comes from

support of Mobile Receive Diversity (MRD), power control needs software for

optimal support of MRD. Additionally, there are some enhancements beyond the

scope of 3GPP2 3G1x Rev E standards to support advanced QLIC (QLIC+) for

forward power control and RLIC for Reverse Power control.

• CE Licensing - The software licensing policy for 1x Advanced CMU-E is similar to

CMU-V/CMU-IVB. RCS are used to configure and initialize the CMU-E similar to

other CMUs, but board level Licensing is not required. CMU-E uses the legacy

CMU-IVB CE provisioning scheme at RC/V Level. A new CE License and Comcode

is developed for the CMU-E channel elements. The customer needs to purchase CE

licenses in 32 CE increments with a minimum of 32 and a maximum of 153600*32

CE, where 153600=4000*12*(1024/32), is the maximum block number. The CMU-E

channel card is delivered as part of the purchase of CE licenses.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




2-3

R37 FID13627.6 (1xAdvanced - CMU-e Expansion to support 2C 1xA )

This feature allows the customer to fully utilize the 1024 CEs available on the CMU-E.

No special customer provisioning is needed and the customer has to load R37 cell SW.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


3 3Impact on the RC/V

subsystem

Overview

Purpose

This chapter provides detailed information about the impact of the 1xAdvanced Air

Interface Technology on CMU-E feature on the Recent Change and Verify forms as listed

further.

Contents

Recent Change and Verify Forms 3-1

Recent Change and Verify Forms

Introduction

The 1xAdvanced Air Interface Technology on CMU-E feature affects the Recent Change

and Verify (RC/V) forms that are listed in Table 3-1, “Related RC/V forms” (p. 3-1).

Table 3-1 Related RC/V forms

Form abbreviation Form name

btseqp CDMA OneBTS MODCELL ASSEMBLAGE

EQUIPAGE

cell2 SERIES 2 CELL

cell3g CELL SITE FOR 3G

ceqface3g CELL EQUIPAGE FACE FOR 3G

ecp3g EXECUTIVE CELLULAR PROCESSOR

FOR 3G

cgsa CELLULAR GEOGRAPHIC SERVICE AREA

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-1

Table 3-1 Related RC/V forms (continued)

Form abbreviation Form name

ecp EXECUTIVE CELLULAR PROCESSOR

ceqface CELL EQUIPAGE FACE

btseqp form

The btseqp form is used to enable the 1xAdvanced Air Interface Technology on CMU-E

feature.

This feature uses the following fields in the btseqp form, as shown in Table 3-2, “Related

fields in the btseqp form” (p. 3-2).

Table 3-2 Related fields in the btseqp form

Field name Description

Recommended

Value for CMU-E

CCU Techtype Specifies the technology type assigned to

a CCU.

1xA

CE Max Specifies the maximum number of CEs

available.

1024

CEs enabled Specified the number of CEs enabled. 32 to 1024 in

increments of 32 CEs

CCU carriers Specifies the first carrier assigned to

Block a of a CCU. This parameter cannot

be updated. Updating this parameter can

cause live calls to be dropped or can

prevent a new call from being set up.

CCU Carrier Number with Carrier Type

of 1xA can only be assigned to one CCU.

Range 1 - 33

CRC type Specifies the technology type supported

by the URC.

1X (IS95A, IS95B,

CDMA 20001x, 1x

Advanced 1xA)

Note: The same carrier

channel(s) cannot be

repeated on multiple

CMU-Es assigned to

the single CRC.

Impact on the RC/V subsystem Recent Change and Verify Forms

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


cell2 form

The cell2 form is used to enable the 1xAdvanced Air Interface Technology on CMU-E

feature.

This feature uses the following fields in the cell2 form, as shown in Table 3-3, “Related

fields in the cell2 form” (p. 3-3).

Table 3-3 Related fields in the cell2 form

Field name Description

Recommended

values

3G Allowed Carrier This parameter is used for call

processing to determine whether a

carrier that is equipped with 3G

hardware should be treated as a 3G

capable carrier (3G allowed) or a

2G-only carrier (3G not allowed).

3G-allowed

1x Advanced Feature

Enabled

This parameter is to activate the

1xAdvanced Feature.

ON

Default = OFF

Carrier Type When the Carrier Type is set to 1xA,

then that Carrier Number can only be

assigned to a CCU on BTSEQP Form

with CCU Tech Type setting of 1xA and

CE Maximum setting of 1024. No other

CCU assignment is allowed.

1xA

Auxiliary Cell Control-1 This parameter specifies spare

information that can be used in the

future by the Current Engineering

Group for various features.

Range: 0 - 65535


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-3

cgsa form

This feature uses the following fields in the cgsa form, as shown in Table 3-4, “Related

fields in the cgsa form” (p. 3-4).

Table 3-4 Related fields in the cgsa form

Field name Description Allowed values

3G Allowed Carrier This parameter is used for call

processing to determine whether a

carrier that is equipped with 3G

hardware should be treated as a 3G

capable carrier (3G allowed) or a

2G-only carrier (3G not allowed).

3G-allowed

Carrier Type When the Carrier Type is set to 1xA,

then that Carrier Number can only be

assigned to a CCU on BTSEQP Form

with CCU Tech Type setting of 1xA and

CE Maximum setting of 1024. No other

CCU assignment is allowed.

Legal values are [1]X

(IS95A, IS95B,

CDMA20001x),

1x[A] (1x Advanced),

[D]O (1xEV-DO), or

[L]TE.

Note: When changing the Carrier Type from 1x to 1xA on either CGSA or Cell2 form

the carrier must be unassigned from the radio. An error message appears if the carrier

is active and in use by the cell.

On CGSA the Error Message is: Carr Type on carrier x can not be changed. It is being

used on cell y.

On CELL2 the Error Messages for a carrier active on a 15MHz MCR radio: For Cell

y, Carr Type of carrier x is being changed. Therefore, this carrier must first be

unassigned from BTSEQP form.

On CELL2 the Error Messages for a carrier active on a RRH remote radio head: For

Cell y, Carr Type of carrier x is being changed. Therefore, this carrier must first be

unassigned from RRH Carr Equipage (RRHEQP).

Where x is the carrier number and y is the cell number.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


ecp form

This feature uses the following fields in the ecp form, as shown in Table 3-5, “Related

fields in the ecp form” (p. 3-5).

Table 3-5 Related fields in the ecp form


Maximum Access Channel

Message Capsule Size

The system allows the technician to

specify the maximum access channel

message capsule size. This parameter is

used to map the maximum number of

access channel frames in the access

channel message according to IS-95[6].

3 - 10

If the ECP or Cell

RC/V settings satisfy

the condition that

(max_cap_sz +

pam_sz) < 15, then

there is no need to

change the values. If

change is required,

then the

recommended values

are:

• 7<=

max_cap_sz<=10

• 2<= pam_sz <=4

If values are changed

at cell level, the user

will need to manually

enter sector size on

CEQFACE form. The

value will be the same

used at ECP level.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-5

Table 3-5 Related fields in the ecp form (continued)


Access Channel Preamble

Length (pam_sz)

This parameter specifies the access

channel preamble length.

1 to 15 (frames)

If the ECP or Cell

RC/V settings satisfy

the condition that

(max_cap_sz +

pam_sz) < 15, then

there is no need to

change the values. If

change is required,

then the

recommended values

are:

• 7<=

max_cap_sz<=10

• 2<= pam_sz <=4

If values are changed

at cell level, the user

will need to manually

enter sector size on

CEQFACE form. The

value will be the same

used at ECP level.

ecp3g form

This feature uses the following fields in the ecp3g form, as shown in Table 3-6, “Related

fields in the ecp3g form” (p. 3-6).

Table 3-6 Related fields in the ecp3g form


F-FCH PC Bit to Traffic Bit

Ratio for RC3, RC4, RC5

and RC11 - 2-way.

This parameter is equal to the power

level of the forward link power control

subchannel (PC bits on the F-FCH)

relative to the power level of the full

rate traffic bits of the F-FCH for 3G1X

2-way soft handoff voice calls for

Radio Configurations RC3, RC4, RC5

and RC11.

0 to 7.75 dB

Default = 5

Increment = 0.25 dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Table 3-6 Related fields in the ecp3g form (continued)


F-FCH P C Bit to Traffic Bit

Ratio for RC3, RC4, RC5

and RC11 - simplex

(FPC_SUBCHAN_GAIN_ONE_

SHO)






simplex mode voice calls for Radio

Configurations RC3, RC4, RC5 and

RC11.

0 to 7.75 dB

F-FCH P C Bit to Traffic Bit

Ratio for s RC3, RC4, RC5

and RC11 - 3-way or more

(FPC_SUBCHAN_GAIN_THREE_

SHO)






3-way (or more) soft handoff voice

calls for Radio Configurations RC3,

RC4, RC5 and RC11.

0 to 7.75 dB

Default = 5

Increment = 0.25 dB

Central Bias Reference

Power Level Initial Value

for RC11 (RC11_Pref_Init)

This parameter defines the power

reference level initial value for RC11

for the forward link power to converge

to in the event of random power

control bits on RPICH.

-23 dB to -5 dB

Increment = 1

Default = -12 dB

Forward Link Smart

Blanking Duty Cycle Value

(FOR_FCH_BLANKING_

DUTYCYCLE)

This parameter specifies the period, in

units of frames, of required non-zero

rate transmissions by the base station

on the Forward Fundamental Channel

when operating with Radio

Configuration 11 for 1xAdvanced

voice.

1 = Blanking disabled

4 = Atleast 1 out of 4

frames transmitted

8 = At least 1 out of 8

frames transmitted

Default = 1

Reverse Link Smart


(REV_FCH_BLANKING_

DUTYCYCLE)



rate transmissions by the mobile station

on the Reverse Fundamental Channel


Configuration 8 for 1xAdvanced voice.

1 - Blanking Disabled


frames transmitted

8 = At least 1 out of 8

frames transmitted

Default = 1


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-7



3GE to 3G Hand Down at

T_ADD

This parameter specifies whether hand

down from 3G1X Advanced to 3G1X

is triggered at T_ADD or not.

Note: This is an overriding field.

Therefore, the value entered on the

cell3g form takes precedence over the

value entered on the ecp3g form.

Range: 0 or 1

Default = 0

3GE Voice QoF Assignment This parameter specifies different ways

to assign QoF to 1xAdvanced voice

calls.

Range: 0 or 1

Default = 0

Ack Mask for F-FCH RC11 –

RL Blanking Disabled part 1

This parameter specifies the Ack Mask

for F-FCH RC11 when Reverse Link

blanking is disabled. The base station

sets the subfields corresponding to the

PCGs where Ack can be sent to 1, and

remaining subfields can be set to 0 for

1xAdvanced voice. This is Ack Mask

part 1.

Range: 0000 - 1111

Default = 0000

Recommended value:

0000

Ack Mask for F-FCH RC11 -

RL Blanking Disabled, part

2


for F-FCH RC11 When Reverse Link




it also sets the remaining subfields to 0

for 1xAdvanced voice. This is Ack

Mask part 2.

Range: 0000 - 1111

Default = 1010

Recommended value:

0010


RL - Blanking Disabled, part

3






sets the remaining subfields to 0 for


part 3.

Range: 0000 - 1111

Default = 1010

Recommended value:

0111


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1





RL -Blanking Disabled, part

4








part 4.

Range: 0000 - 1111

Default = 1010

Recommended value:

1100


RL Blanking Enabled, part 1



blanking is enabled. The base station





part 1.

Range: 0000 - 1111

Default = 0001

Recommended value:

0000


RL -Blanking Enabled, part

2








part 2.

Range: 0000 - 1111

Default = 1001

Recommended value:

0001


RL -Blanking Enabled, part

3








part 3.

Range: 0000 - 1111

Default = 1001

Recommended value:

0001


RL - Blanking Enabled, part

4








part 4.

Range: 0000 - 1111

Default = 1000

Recommended value:

1000


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-9



Ack Mask for R-FCH RC08,

part 1

This parameter specifies the PCG of

F-FCH that the Forward

Acknowledgment Sub channels to be

transmitted. The base station sets the

subfields corresponding to the PCGs

where Ack can be sent to 1xAdvanced

voice. This is Ack Mask part 1.

0000, 0010, 1000,

1010

Recommended value:

0000


part 2








0000, 0010, 1000,

1010

Recommended value:

0000


part 3








0000, 0010, 1000,

1010

Recommended value:

0000


part 4








0000, 0010, 1000,

1010

Recommended value:

0000


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


cell3g form

This feature uses the following fields in the cell3g form, as shown in Table 3-7, “Related

fields in the cell3g form” (p. 3-11).

Table 3-7 Related fields in the cell3g form


Forward Link Smart


(FOR_FCH_BLANKING_

DUTYCYCLE)



rate transmissions by the base station

on the Forward Fundamental Channel


Configuration 11 for 1xAdvanced

voice.



frames transmitted


frames transmitted

Default = blank

Reverse Link Smart


(REV_FCH_BLANKING_

DUTYCYCLE)



rate transmissions by the mobile station

on the Reverse Fundamental Channel


Configuration 8 for 1xAdvanced voice



frames transmitted


frames transmitted

Default = blank

F-FCH Minimum Gain for

Radio Configuration RC4 in

simplex mode

(FPC_MIN_GAIN_RC4_1)

This translation parameter is equal to

the minimum gain for full rate frames

used by power control in the forward

link for the F-FCH. This value is

defined for calls in Radio

Configuration RC4 in simplex mode.

-40 dB to -9 dB

Default = -15 dB


Radio Configuration RC4 for

two ways soft handoff







Configuration RC4 for two soft

handoff legs.

-40 dB to -6 dB

Default = -13 dB



three or more ways soft

handoff (FPC_MIN_GAIN_RC4_

3)






Configuration RC4 for three or more

soft handoff legs.

-40 dB to -4 dB

Default = -11 dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-11

Table 3-7 Related fields in the cell3g form (continued)


3G Handoff Escalation due

to 2G-Only Sector/Carrier

(3G_HO_Escal_by_

2G_Enabled)

This parameter indicates if the 3G HO

Escalation caused by encountering 2G

only sector or carrier is on.

When 1xAdvanced Feature Enabled is

set to On, this parameter

Enables/Disables 3GE HO Escalation

Caused by Encountering a 3G-Only

sector or 3G-Only Carrier.

0 = Off, 1 = On

Default = 0

3G Handoff Escalation due

to Lack of 3G Resources

(3G_ HO_Escal_by_Resources_

Enabled)

This parameter indicates if the 3G HO

Escalation caused by lack of 3G

resources at a candidate is on.

0 = Off, 1 = On

Default = 0


Power Level Initial Value

for RC11 (RC11_Pref_Init)

This parameter defines the initial

power reference level for RC11 for the

forward link power to converge to in

the event of random power control bits

on R-PICH.

blank, -23 dB to -5

dB

Default = blank

Reverse Power Control

Mode for 1xAdvanced Voice

(RPC_MODE)

This translation parameter defines the

Reverse Link Closed Loop Power

control update rate assigned by the

base station for 1xAdvanced Voice.

00 (if power control

rate is 200 to 400

bps), 01 (if power

control rate is 200

bps)

Default = 00

Voice Frame Error Rate for

F-FCH for Radio

Configuration RC11

(FPC_FCH_FER_RC11_

VOICE)


target frame error rate for the F-FCH

for 1xAdvanced voice calls in Radio

Configuration RC11.

0.2%, 0.5%, 1.0 %,

1.5%, 2.0 %, 2.5 %,

3.0% (these values

are allowed by

IS-2000)

Default = 1%

Forward Fundamental

Channel (F-FCH) Minimum

Eb/Nt Setpoint for

1xAdvanced Voice Radio

Configuration RC11 in

simplex mode

(FPC_FCH_MIN_SETPT_RC11_

1)

This parameter defines the Minimum

value of the outer loop Eb/Nt setpoint

used by the F-FCH for 1xAdvanced

voice calls in simplex mode and

forward Radio Configuration RC11.

0 dB to 12 dB

Default = 3dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Forward Fundamental

Channel (F-FCH) Initial

Eb/Nt Setpoint for



simplex mode

(FPC_FCH_INIT_SETPT_RC11_

1)

This parameter defines the initial value

of the outer loop Eb/Nt setpoint used

by the F-FCH for 1xAdvanced voice

calls in simplex mode and forward

Radio Configuration RC11.

2 dB to 15 dB

Default = 8dB

Forward Fundamental

Channel (F-FCH) Maximum

Eb/Nt Setpoint for



simplex mode

(FPC_FCH_MAX_SETPT_RC11_

1)

This parameter defines the Maximum

value of the outer loop Eb/Nt setpoint

used by the F-FCH for 1xAdvanced

voice calls in simplex mode and

forward Radio Configuration RC11.

2 dB to 18 dB

Default = 8 dB

Forward Fundamental


Eb/Nt Setpoint for

1xAdvanced Voice for

Radio Configuration RC11

with two or more soft plus

softer handoff connections


2)


minimum value of the outer loop Eb/Nt

setpoint used by the F-FCH for

1xAdvanced voice calls with two or

more soft plus softer handoff

connections for Radio Configuration

RC11.

0 dB to 8 dB

Default = 5 dB

Forward Fundamental

Channel (F-FCH) Initial

Eb/Nt Setpoint for






2)


initial value of the outer loop Eb/Nt

setpoint used by the F-FCH for


more soft handoff legs and forward


2 dB to 10 dB

Default = 8 dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-13



Forward Fundamental


Eb/Nt Setpoint for






2)


Maximum value of the outer loop

Eb/Nt setpoint used by the F-FCH for



connections for Radio Configuration

RC11.

2 dB to 17 dB

Default = 9 dB

Step Size for F-FCH Inner

Loop Power Control for

1xAdvanced Voice in Radio

Configuration RC11 for

Simplex (FPC_PWR_CNTRL_

STEP_RC11_1_VOICE).


the incremental power used for forward

inner loop power control. This value is

defined for 1xAdvanced voice calls in

Radio Configuration RC11 for simplex

mode.

0, 0.25 dB, 0.5 dB,

and 1.0 dB

Default = 1 dB





for 2 or more

(FPC_PWR_CNTRL_STEP_

RC11_2_VOICE).


the incremental power used for forward

inner loop power control. This value is

defined for 1xAdvanced voice calls for

Radio Configuration RC11 with two or


connections.

0, 0.25 dB, 0.5 dB,

1.0 dB

Default = 1.0 dB

Channel Adjustment Gain

for Reverse

Acknowledgement Channel

1 for RC11 for one active

set (REV_ACKCH_GAIN_ADJ_

ACS1)


the Reverse Acknowledgement

Channel 1 gain adjust (relative to the

nominal value) for RC11 when number

of cells in the active set equals 1.

-8 to 7.875 dB

Default = 0 dB

Channel Adjustment Gain

for Reverse

Acknowledgement Channel

1 for RC11 for two or more

number of cells in the

active set

(REV_ACKCH_GAIN_ADJ_

ACS2PLUS)


the Reverse Acknowledgement

Channel 1 gain adjust (relative to the

nominal value) for RC11 when number

of cells in active sets is greater than or

equal to two.

-8 to 7.875 dB

Default = 0 dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Mobile Receive Diversity

offset to F-FCH Minimum

Gain for 1xAdvanced Voice

(MRD_MIN_GAIN_OFFSET_

3G1X_FCH)


offset value to minimum gain for full

rate frames used by power control in

the forward link for the F-FCH when

mobile supports receive diversity.

-10 dB to 0 dB

Default = 0 dB

RLIC Reverse Link Eb/Nt

Initial Setpoint Offset

(RLIC_REV_INIT_SETPT_

OFFSET)

This translation parameter specifies the

offset value to be added to the value of

the initial Eb/Nt setpoint of the reverse

outer loop of the R-FCH set by the

base station as a result of the RLIC

gain when 1x Advanced feature is

implemented.

-8 dB to 0 dB

Default = -1.5 dB

Recommended value:

0


Minimum Setpoint Offset

(RLIC_REV_MIN_SETPT_

OFFSET)



the minimum Eb/Nt setpoint of the

reverse outer loop of the R-FCH set by

the base station as a result of the RLIC


implemented.

-8 dB to 0 dB

Default = -1.5 dB

Recommended value:

0


Maximum Setpoint Offset

(RLIC_REV_MAX_SETPT_

OFFSET)



the maximum Eb/Nt setpoint of the

reverse outer loop of the R-FCH set by

the base station as a result of the RLIC


implemented.

-8 dB to 0 dB

Default = 0

Recommended value:

0

RLIC Offset for Access

Channel Open Loop

Adjustment

(AC_RLIC_OFFSET)


offset value used by NOM_PWR in the

Access Parameters Message set by the

1xAdvanced base station.

-5 dB to 0 dB

Default = 0

R-FCH Eb/Nt Step Up Size

for Reverse Outer Loop

Power Control for Radio

Configuration RC8

(RPC_FCH_STEP_UP_SETPT_

RC8)

This parameter defines the value of the

Eb/Nt Step Up Size used by the outer

loop power control for the Reverse

Fundamental Channel (R-FCH) for

1xAdvanced Voice calls for Radio

Configuration RC8.

0 dB to 1 dB

Default = 0.5 dB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-15




R-FCH for 8K VOCODER for


(RPC_FCH_FER_RC8_

VOICE)


target frame error rate used by the

outer loop power control for the

Reverse Fundamental Channel

(R-FCH) for 1xAdvanced Voice calls

in Radio Configuration RC8 while

using the 8K vocoder.

0.2%, 0.5%, 1.0%,

1.5%, 2%, 2.5%, 3%

Default = 1%

R-FCH Minimum Eb/Nt

Setpoint for Reverse Radio

Configuration RC8

(RPC_FCH_MIN_SETPT_

RC8)

This parameter defines the Minimum

value of the Eb/Nt setpoint used by the




for Radio Configuration RC8.

-4 dB to 3.75 dB

default = -0.5 dB

R-FCH Initial Eb/Nt Setpoint

for Reverse Radio

Configuration RC8

(RPC_FCH_INIT_SETPT_

RC8)

This parameter defines the initial value

of the Eb/Nt setpoint used by the outer

loop power control for the Reverse

Fundamental Channel (R-FCH) for

1xAdvanced Voice calls for reverse


-3 dB to 7.75 dB

default = 2.5 dB

R-FCH Maximum Eb/Nt


Configuration RC8

(RPC_FCH_MAX_SETPT_

RC8)

This parameter defines the Maximum

value of the Eb/Nt setpoint used by the




for Radio Configuration RC8.

-2 dB to 7.75 dB

Default = 2.5 dB

Power Control Step Size

during RL Blanking

(PWR_CNTL_STEP_ZERO_

RATE)

This parameter specifies the power

control step size that the mobile station

is to use for closed loop power control

during RL Blanking for 1xAdvanced

voice.

0.25 dB, 0.5 dB, 1.0

dB, 1.5 dB, 2.0 dB

Default = 1.0 dB

N2m for Forward Link

Indicator

This parameter indicates the number of

guaranteed transmission frames

received with insufficient signal quality

that will cause the mobile station to

disable its transmitter when RC11 is

used on F-FCH for 1xAdvanced voice.

Note: This field overrides a similar

field on the ecp3g form.

Range: 0 - 7 (or

NULL)


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1





T_ADD

This parameter indicates whether hand

down from 3G1X Advanced to 3G1X

is triggered at T_ADD or not. Note:

This field overrides a similar field on

the ecp3g form.

Range: 0 or 1 (or

NULL)

ceqface form

This feature uses the following fields in the ceqface form, as shown in Table 3-8,

“Related fields in the ceqface form” (p. 3-17).

Table 3-8 Related fields in the ceqface form


Maximum Access Channel

Message Capsule Size

The system allows the technician to

specify the maximum access channel

message capsule size. This parameter is

used to map the maximum number of

access channel frames in the access

channel message according to IS-95[6].

3- 10, blank

Default = blank

Recommended value:

10

Access Channel Preamble

Length (pam_sz)

This parameter specifies the access

channel preamble length.

1 - 15, blank

Default = blank

Recommended value:

4


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-17

ceqface3g form

This feature uses the following fields in the ceqface3g form, as shown in Table 3-9,

“Related fields in the ceqface3g form” (p. 3-18).

Table 3-9 Related fields in the ceqface3g form


Semi-Soft 3G Carrier

Selection

This parameter allows the use of the

3G1X Load Preference Delta to

determine 2G/3G CE resource

assignment for a 3G voice semi-soft

handoff request.

When 1xAdvanced Feature Enabled is

set to On, this parameter allows the use

of the 3GE Load Preference Delta to

determine 3G/3GE CE resource

assignment for a 3GE voice semi-soft

handoff request.

0= Off, 1 =On

Default = 0

3GE Voice Load Preference

Delta (�3GE) - Prim

This parameter is used to specify the

primary loading preference for

assigning 1xAdvanced mobiles to

carriers with available 1xAdvanced CE

resources. Carriers not specified to use

the Alt use the Prim value. See

parameter 3GE Voice Load Preference

Delta (Δ3GE) - Alt and 3GE Voice

Load Preference Delta (Δ3GE) -

Carriers Using Alt..

40 - 100

Default = 40


Delta (�3GE) - Alt


alternative loading preference for




the Alt uses the Prim value.

40 - 100

Default = 40


Delta (�3GE) - Carriers

Using Alt


carriers that are using the alternative

value for the loading preference for




the Alt will use the Prim value. There

is one field for each of the carriers.

y, blank (blank = n)

Default = blank


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Table 3-9 Related fields in the ceqface3g form (continued)


QoF=0 Walsh Code FCH

Assignment Threshold

This parameter specifies the point at

which QoF=1 Walsh codes are

assigned.

0-128

Default = 128

Auxiliary Cell Control Translations

Function Release Introduced Translation control

IS2000E v3.0 message

format control for SPM

R36.1 Auxiliary ECP Control-1 bit 1

IS2000E v3.0 message

format control for

RCPM

R36.1 Auxiliary ECP Control-1 bit 7

Early Decode Enable

Flag

R36.1 Auxiliary Cell Control-1 bit 9

Activation of Features with Auxiliary ECP Control-1

Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Value 32768 16384 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1

IS2000E

v3.0

message

format

control

for SPM

- - - - - - - - - - - - - - B1 -

IS2000E

v3.0

message

format

control

for

RCPM

- - - - - - - - B7 - - - - - - -

IS2000E v3.0 message format control for SPM:

If B7 = 0, SPM is formatted without rc_bitmap_capability_ext_allowed defined in

IS2000E v3.0.

If B7 = 1, SPM is formatted with rc_bitmap_capability_ext_allowed defined in IS2000E

v3.0. (Recommended)

IS2000E v3.0 message format control for RCPM:


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




3-19

If B1 = 0, RCPM is formatted without FPC_MOD defined in IS2000E v3.0.

If B1 = 1, RCPM is formatted with FPC_MODE defined in IS2000E

v3.0.(Recommended)

Activation of Features with Auxiliary Cell Control-1

Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Value 32768 16384 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1

Early

decode

Enable

Flag

- - - - - - B9 - - - - - - - - -

Early decode Enable Flag:

If B9 = 0, Early decode is disabled on CMUE (Recommended)

If B9 = 1, Early decode is enabled on CMUE.

References

For more information about these RC/V forms and fields, see the following CDMA®

network documents:

• Database Update Manual, 401-610-036

• Text Recent Change and Verify (RC/V) Reference, 401-610-038


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


4 4Impact on service

measurements

Overview

Purpose

This chapter provides detail on the impact of the 1xAdvanced Air Interface Technology on

CMU-E feature on the service measurements.

Contents

Service Measurements 4-1

Service Measurements

Introduction

This feature add new group in CDMA-PAF-CARR-RC & CDMA-PAF-CARR-RC-SC to

support RC11. The 1xAdvanced Air Interface Technology on CMU-E feature impacts the

following services measurements:

Service

Measurement

subcategory

Count

abbreviation

Count

field

number

Count name

CDMA-3G CDMA-PAF-

CARR-SC

202 1x Advanced CP Fail CDMA Dropped Calls -

Voice

Newly created

CDMA-3G CDMA-PAF-

CARR-SC

205 1x Advanced CDMA Lost Calls -Voice

Newly created

CDMA-3G CDMA-PAF-

CARR-SC

203 1x Advanced Originations Traffic Channel

Confirmation Failure -Voice

Newly created

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




4-1

Service

Measurement

subcategory

Count

abbreviation

Count

field

number

Count name

CDMA-3G CDMA-PAF-

CARR-SC

204 1x Advanced Terminations Traffic Channel

Confirmation Failure - Voice

CDMA-3G CDMA-PAF-

CARR-SC

206 1x Advanced Origination Seizures - Voice

CDMA-3G CDMA-PAF-

CARR-SC

208 1x Advanced Page Response Seizures - Voice

CDMA-3G CDMA-PAF-

CARR-SC

200 1x Advanced Originations Assigned to a 1x A

Fundamental Channel - Voice

CDMA-3G CDMA-PAF-

CARR-SC

201 1x Advanced Terminations Assigned to a 1x A

Fundamental Channel - Voice

CDMA-3G CDMA-PAF-

CARR-SC

198 1x Advanced Origination assigned to 3G

Channel

CDMA-3G CDMA-PAF-

CARR-SC

199 1x Advanced Termination assigned to 3G

Channel

CDMA-3G CDMA-PAF-

CARR-SC

207 1x Advanced CDMA Established Calls for

Origination -- Voice

CDMA-3G CDMA-PAF-

CARR-SC

209 1x Advanced CDMA Established Calls for

Termination -- Voice

CDMA-3G CDMA-PAF-

CARR-L

145 1x Advanced Reported Forward fundamental

channel frame count - RC11 EVRC-B voice

CDMA-3G CDMA-PAF-

CARR-L


channel error frame count - RC11 EVRC-B

voice

CDMA-3G CDMA-PAF-

CARR-L

147 1x Advanced Reverse Fundamental channel

frame count - RC8 EVRC-B voice

CDMA-3G CDMA-PAF-

CARR-L


error frame count - RC8 EVRC-B voice

CDMA-3G CDMA-PAF-

CARR-L


channel frame count - RC11 voice

CDMA-3G CDMA-PAF-

CARR-L


error frame count - RC8 voice

CDMA-3G CDMA-PAF-

CARR-L


frame count - RC8 voice

CDMA-3G CDMA-PAF-

CARR-L


channel error frame count - RC11 voice

Impact on service measurements Service Measurements

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Service

Measurement

subcategory

Count

abbreviation

Count

field

number

Count name

CDMA-3G CDMA-PAF-

CARR

322 Primary Walsh Code Usage for QoF set 1- voice

call

CDMA-3G CDMA-PAF-

CARR

323 Total Walsh Code Usage for QoF set 1- voice

call

CDMA-3G CDMA-PAF-

CARR -RC

1 Number of Calls on CDMA Radio

Configuration

CDMA-3G CDMA-PAF-

CARR -RC

2 Total Walsh Code Usage

CDMA-3G CDMA-PAF-

CARR -RC

3 Total Walsh Code Usage - Circuit Mode Data

(CMDATA)

CDMA-3G CDMA-PAF-

CARR -RC

4 Total Walsh Code Usage - Packet Mode Data

(PMDATA)

CDMA-3G CDMA-PAF-

CARR -RC

5 Total Walsh Code Usage - Short Message

Service (SMS)

CDMA-3G CDMA-PAF-

CARR -RC

6 Primary Voice Code Usage - Voice

CDMA-3G CDMA-PAF-

CARR -RC

7 Primary Voice Code Usage - Circuit Mode Data

(CMDATA)

CDMA-3G CDMA-PAF-

CARR -RC

8 Primary Voice Code Usage - Packet Mode Data

(PMDATA)

CDMA-3G CDMA-PAF-

CARR -RC

9 Primary Voice Code Usage - Short Message

Service (SMS)

CDMA-3G CDMA-PAF-

CARR -RC

10 Average Digital Gain Unit (DGU) on Forward

Traffic Channels - Voice

CDMA-3G CDMA-PAF-

CARR -RC

11 Average Digital Gain Unit (DGU) on Forward

Traffic Channels - Data

CDMA-3G CDMA-PAF-

CARR

-RC-SC

1 Number of Calls on CDMA Radio

Configuration

References

For detailed information about the service measurements, see CDMA® Wireless Networks

Service Measurement, 401-610-135.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




4-3


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


5 5Impact on Per Call

Measurement Data

Per Call Measurement Data

Per Call Measurement Data (PCMD)

The PCMD record delivered to the Alcatel-Lucent 9256 OMP has been modified to

support 1xAdvance and the new CMU-E board. The following PCMD fields have been

extended to add new Radio Configurations for 1xAdvanced and expand to the number of

channel elements supported by the CMU-E board:

• Field 13: Range of initial channel element number expanded to support up to 1024

• Field 17: Range of last channel element number expanded to support up to 1024

• Field 45: Forward traffic channel radio configuration expanded to include RC-11

• Field 46: Reverse traffic channel radio configuration expanded to include RC-8

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




5-1

Impact on Per Call Measurement Data Per Call Measurement Data

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


6 6Impact on Status Display

Pages and Technician

Interface

Overview

Purpose

This chapter provides detailed information about the impact of the 1xAdvanced Air

Interface Technology on CMU-E feature on Status Display Pages (SDP) and Technician

Interface (TI).

Contents

Impact on Status Display Pages 6-1

Impact on Technician Interface 6-3

Impact on Status Display Pages

Introduction

This section describes the impact of 1xAdvanced Air Interface Technology on CMU-E

feature on Status Display Pages.

Status Display Pages

This section describes the changes for Status Display Pages when FID 13627.22,

1xAdvanced Air Interface Technology on CMU-E feature is enabled. All the pages are

reinitialized by the SDP.

SDP Changes for CMU-E

ECP DAP migration feature (R28.0 FID-12854.0) has to be activated in order to display

SDP-2139 page with updates for CMU-E.

The SDP-2139 page adds display for the CMU-E and 1xA Carrier. The CMU-E format is

the same as the existing CCU layout, with the exception of a consolidated CE Status.

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




6-1

Indications are as follows:

• Display status for one CMU-E per page. From 1 to 12 CMU-E boards per CDM.

• Carrier indications to display up to 6 unique carriers.

• Number of Channel Elements Licensed CE LIC (0 to 1024 in increments of 32).

– Display is blank for unequipped, growth, and OOS CMU-Es.

• Number of CE In Use (0 to 1024, blank).

– Display is blank for unequipped, growth and OOS CMU-Es.

– For CMU-E the number displayed is based on the number of CEs assigned by call

processing. The number of CEs assigned must be <= Total Allowed CEs in the

License.

• Unequipped CMU-Es are not displayed.

• The percent busy indicator (% busy) indicate % of CMU-E capacity usage.

• All CU Block Reason indicators apply to the CMU-E.

Figure 6-1 Cell Site Status Summary Page

Impact on Status Display Pages and Technician Interface Impact on Status Display Pages

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Impact on Technician Interface

Introduction

This section describes the impact of 1xAdvanced Air Interface Technology on CMU-E

feature on Technician Interface.

Input messages

The following input messages are supported by the 1xAdvanced Air Interface Technology

on CMU-E feature:

• MOVE:DN

• MOVE:IMSI

• EXC:CELL-FT

• DGN:CELL-UCL

• RST:CELL-UCL

• RMV:CELL-UCL

Output reports

The following output reports are supported by the 1xAdvanced Air Interface Technology

on CMU-E feature:

• OP-CELL-CCU

• OP-OC-CELL

• OP-ALARM

• REPT-CELL-HEH-2

• CFR and OCNS have added RC11 the new radio configuration profile for

1X-Advanced.

Note: 1. OP-CELL-CCU also adds the CMU-E to the CCU Board Type field.

2. DGN, RST, RMV must be run with unconditional option to bypass oos limit. A

conditional command will be rejected. Since a CMU-E can support two fully loaded

1xA carriers with 100% coverage then it is assumed that there will only be one

CMU-E in the cell support those carrier. So CE OOS Limits for the CMU-E does not

make any sense; since a conditional remove will never be allowed due to 1xA service

impact. Therefore an unconditional remove has to be used to remove the CMU-E and

the carriers from service. Following this strategy, a CDL remove of a URC that owns

a CMU-E will be reject. Since the removal of the URC also removes the CMU-E, a

UCL remove of the URC is required.

3. Move:OC overhead channels are not supported for CMU-E 1xA carrier.

Impact on Status Display Pages and Technician Interface Impact on Technician Interface

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




6-3

Impact on Status Display Pages and Technician Interface Impact on Technician Interface

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


7 7Feature Implementation

Overview

Purpose

This chapter provides information on the procedures and their sequence to be performed

to implement the 1xAdvanced Air Interface Technology on CMU-E feature.

Contents

Feature Activation 7-2

Provisioning cell2 form for 1xAdvanced Air Interface Technology on CMU-E

feature

7-3

Procedure to configure CMU-E using btseqp form 7-7

Provisioning the cgsa form for 1xAdvanced Air Interface Technology on

CMU-E feature

7-12

Provisioning the ecp form for 1xAdvanced Air Interface Technology on CMU-E

feature

7-14

Provisioning the ecp3g form for 1xAdvanced Air Interface Technology on

CMU-E feature

7-18

Provisioning the cell3g form for 1x Advanced Air Interface Technology on

CMU-E feature

7-24

Provisioning the ceqface form for 1xAdvanced Air Interface Technology on

CMU-E feature

7-35

Provisioning the ceqface3g form for 1xAdvanced Air Interface Technology on

CMU-E feature

7-40

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-1

Feature Activation

Purpose

This procedure activates the 1xAdvanced Air Interface Technology on CMU-E feature in a

CDMA2000® network.

Note: The new 1x Advanced feature is activated if the customer has implemented the

BTS 1x Advanced CMU-E channel card and enabled the feature on cell2 form. As this

feature is a Standard feature, no Activation license is required. CE activation is

controlled by a License instead of by a FAF.

Procedure

Perform the following steps:

...................................................................................................................................................................................................

1 Deploy the CMU-E channel board to support 1x Advanced.

Note: The CMU-E can support up to 1024 channel elements (CE) on the forward and

on the reverse link.

...................................................................................................................................................................................................

2 Upgrade the Cell and ECP SW to the release where 1x Advanced is supported.

...................................................................................................................................................................................................

3 Purchase CE Licenses along with the CMU-E channel board. CE Licensing for CMU-E is

done at the ECP Level. There will be a total pool of CEs that the board draws from when

it is equipped in RC/V. This licensing strategy allows the user to activate CEs at ECP

level and replaces board level licensing, like in previous channel boards: CMU-IVB and

CMU-V, where license is tied to the board serial number. Like the CMU-IVB and

CMU-V, licenses are activated in blocks of 32 CEs with a minimum of 32 and a

maximum of 1024 CEs per CMU-E board.

...................................................................................................................................................................................................

4 Provision an activation switch bit as a translation parameter to activate 1xA per cell.

Feature Implementation Feature Activation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


E N D O F S T E P S...................................................................................................................................................................................................

Provisioning cell2 form for 1xAdvanced Air Interface

Technology on CMU-E feature

Purpose

This procedure provisions the cell2 form for the 1xAdvanced Air Interface Technology on

CMU-E feature.

Fields to be populated

The fields that you must populate in the cell2 form are described in Table 7-1, “Fields to

be populated in the cell2 form” (p. 7-3).

Table 7-1 Fields to be populated in the cell2 form

Field name Text RC/V name

Value to be

entered Restrictions

Carr type Car_type 1xA When the Carrier

Type is set to 1xA,

then that Carrier

Number can only be

assigned to a CCU on

BTSEQP Form with

CCU Tech Type

setting of 1xA and CE

Maximum setting of

1024 . No other CCU

assignment is allowed.

1xAdvanced Feature

enabled

(enbl_1xadv) ON NA

Auxiliary cell Ctrl- (aux_cell_1) Range: 0 -

65535

NA

Procedure


...................................................................................................................................................................................................

1 Start the RC/V cell2 form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the Carr type field. Add 1xA as the carrier type.

This field is update to configure the carrier type that is assigned to CMU-E board using

the btseqp form.

Feature Implementation Provisioning cell2 form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-3

Result: The cell2 form is displayed, as shown in the following screenshot:

...................................................................................................................................................................................................

3 Advance to the screen that contains the 1xAdvanced Feature Enabled field to Turn ON

1xAdvanced feature



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The cell2 form is displayed as shown in the following screenshot:

...................................................................................................................................................................................................

4 Add 1xA as the carrier type.

...................................................................................................................................................................................................

5 For IPBH and EBH cell, add the IPBH information for the added 1xA carrier.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-5

Result: Make the required entries in the screen as shown in the following screenshot:

...................................................................................................................................................................................................

6 Enable the flag by turning the ON option.

Result: The cell2 form is provisioned for 1xAdvanced Air Interface Technology on

CMU-E feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


E N D O F S T E P S...................................................................................................................................................................................................

Procedure to configure CMU-E using btseqp form

Purpose

This procedure provides instructions to configure the CMU-E using the btseqp form.

Feature Implementation Procedure to configure CMU-E using btseqp form

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-7


The fields that you must populate in the btseqp form are described in Table 7-2, “Fields

to be populated in the btseqp form” (p. 7-8)

Table 7-2 Fields to be populated in the btseqp form


Value to be


CCU Techtype ccu_tech_type 1xA1. When CCU Tech Type is

1xA, then the Intelligent

Antenna Enable parameter

on the BTSEQP form must

be set to n for all PAFs.

Otherwise an error message

is displayed.

2. When CCU Tech Type is

1xA, then radio assignment

is restricted to CBR Types

(5 MHz or 15 MHz) or any

of the RRH Types on

RRHEQP.


1xA, then it must be

associated with a CRC

Controller Type = URC-II

or URC-III.


1xA and CCU Status is e or

g, then only carriers of type

1xA can be assigned to this

CCU and at least one

carrier of type 1xA must be

assigned to it.


1xA the Cell Generic

Version Name must be

R36.0 or later. An error

message is displayed if this

cross check with Cell2

fails.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Table 7-2 Fields to be populated in the btseqp form (continued)


Value to be


CE Max ccuinfo[12].ce_max 1024 When the CE Maximum is

1024, indicating a CMU-E,

then CEs Enabled must be

non-blank. The allowed values

are 32 up to 1024, in 32 CE

increments.

CEs Enabled (ccuinfo[].ce_act) 32 to 1024

in 32

increments

When the CE Maximum is

1024, indicating a CMU-E,

then CEs Enabled must be

non-blank. The allowed values

are 32 up to 1024 928, in 32 CE

increments.

Note: CMU-E License is

required to activate CEs

Enabled.

CCU Carriers ccuinfo[].ccucarr1,

ccuinfo[].ccucarr2

The carrier

number of

1xA carrier

defined in

cell2/cgsa

form

A 1xA Carrier Number can be

assigned to only one CMU-E.

Assigning the same 1xA carrier

number to multiple CMU-Es

will be rejected.

CRC type crc_tech_type 1X (IS95A,

IS95B,

CDMA20001x,

1x Advanced

1xA)

When Multiple CCUs are

assigned to a single CRC, the

total number of CEs Enabled

on all of those equipped CCUs

does not exceed 2048.

Note: The same carrier

channel(s) cannot be repeated

on multiple CMU-Es assigned

to the single CRC.

Procedure


...................................................................................................................................................................................................

1 Start the RC/V btseqp form.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-9

...................................................................................................................................................................................................

2 Advance to the screen that contains the CCU Tech type field .

Result: The btseqp form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

3 Enter a value 1x A in the CCU TechType field.

...................................................................................................................................................................................................

4 In the CE Max field, enter a value 1024.

...................................................................................................................................................................................................

5 In the CEs Enabled field, enter a value between 32 through 1024. Enter a value 512 as

the CMU-E board is limited to 512 CEs on the 1st release.

Note: The allowed values are between 32 and 1024 in 32 increments. CMU-E CE

Enabled License is required.

After R37 is loaded, customers can enter a max value of 1024 on the CEs Enable field.

...................................................................................................................................................................................................

6 In the CCU Carriers field, enter 1xA carrier number .

...................................................................................................................................................................................................

7 Assign 1xA carrier number to CBR 1~3

Result: The btseqp form is displayed as shown:


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Note: Check the SDP to verify that the CMU-E is configured. Please refer Chapter 5,

“Impact on Per Call Measurement Data” for more details on SDP.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-11

E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the cgsa form for 1xAdvanced Air Interface


Purpose

This procedure provides instructions to configure the CMU-E using the cgsa form.


The fields that you must populate in the cgsa form are described in Table 7-3, “Fields to

be populated in the cgsa form” (p. 7-12)

Table 7-3 Fields to be populated in the cgsa form


Value to be


3G Allowed Carrier (car_3g) 2G-only,

3G-allowed

When the Carrier

Type is set to 1xA,

This parameter must

be set to 3G allowed.

Procedure

...................................................................................................................................................................................................

1 Start the RC/V cgsa form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the 3G Allowed Carrier field.

Feature Implementation Provisioning the cgsa form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The cgsa form is displayed, as shown in the following screenshot:

...................................................................................................................................................................................................

3 Enter a value 3G allowed. When the Carrier Type is set to 1xA, this parameter must be set

to 3G allowed.

Result: The cgsa form is provisioned for 1xAdvanced Air Interface Technology on

CMU-E feature.

Feature Implementation Provisioning the cgsa form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-13

E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the ecp form for 1xAdvanced Air Interface


Purpose

This procedure provides instructions to provision the ecp form.


The fields that you must populate in the ecp form are described in Table 7-4, “Fields to be

populated in the ecp form” (p. 7-14)

Table 7-4 Fields to be populated in the ecp form


Value to be


Maximum Access

Channel Message

Capsule Size

(max_cap_sz) 3-10

Recommended

value = 10

When the sum of Maximum Access Channel

Message Capsule Size and Access Channel

Preamble Length (pam_sz) is equal or greater

than 15, a warning message is displayed to

indicate that such settings will cause any

equipped CMU-E boards to block setup of any

Access Channels, such that the board will be

incapable of setting up or carrying any traffic,

once the values are applied

If the ECP or Cell RC/V settings satisfy the

condition that (max_cap_sz + pam_sz) < 15,

then there is no need to change the values. If

change is required, then the recommended

values are:

• 7<= max_cap_sz<=10

• 2<= pam_sz <=4

If values are changed at cell level, the user will

need to manually enter "sector size" on

CEQFACE form. The value will be the same

used at ECP level.

Feature Implementation Provisioning the ecp form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Table 7-4 Fields to be populated in the ecp form (continued)


Value to be


Access Channel

Preamble Length

(pam_sz) 1 to 15 (frames)

Recommended

value = 4

1. If the entered value in this field causes the

total delay budget to exceed 337 chips

when the total delay budget is computed

with this equation: 2*6.6*SectorSize+2*

1.2288*Max_Diff_Delay+[2ˆ(Probe_Pn_

Ran]-1, the entered value is greater or equal

to 3 frames and if it is not, then the system

sends the user a warning message

indicating that the entered value will cause

the Channel Element (CE) maximum

compensation delay to be exceeded and

CDMA operation is affected.

2. When the parameter is changed the system

displays a warning message saying that it is

a non-updatable parameter and must be

followed by a stable clear and the call

processing capability may be lost in the

interim.

3. When the sum of Maximum Access

Channel Message Capsule Size and

Access Channel Preamble Length

(pam_sz) is equal or greater than 15, a

warning message is displayed to indicate

that such settings causes any equipped

CMU-E boards to block setup of any

Access Channels, so that the board will be

incapable of setting up or carrying any

traffic, once the values are applied.

Procedure


...................................................................................................................................................................................................

1 Start the RC/V ecp form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the Maximum Access Channel Message Capsule

Size field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-15

Result: The ecp form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

3 Enter a value 10 in the Maximum Access Channel Message Capsule Size field based on

the situation.

...................................................................................................................................................................................................

4 Advance to the screen that contains Access Channel Preamble Length field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The ecp form is displayed as shown in the following screen capture:

...................................................................................................................................................................................................

5 Enter a value 4 in the Access Channel Preamble Length field.

Note: The total size of ACH capsule size and ACH preamble size has to be less than

15.

Result: The ecp form is provisioned for 1xAdvanced Air Interface Technology on

CMU-E feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-17

E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the ecp3g form for 1xAdvanced Air Interface


Purpose

This procedure provides instructions to provision the ecp3g form.


The fields that you must populate in the ecp3g form are described in Table 7-5, “Related

fields in the ecp3g form” (p. 7-18)

Table 7-5 Related fields in the ecp3g form


Value to be


F-FCH PC Bit to Traffic

Bit Ratio for RC3, RC4,

RC5 and RC11 - 2-way.

(vfpc2sho_sbchg) 0 to 7.75 dB NA

F-FCH P C Bit to Traffic

Bit Ratio for s RC3, RC4,

RC5 and RC11 - 3-way

or more

(FPC_SUBCHAN_GAIN_

THREE_SHO)

(vfpc3sho_sbchg) 0 to 7.75 dB NA


Power Level Initial

Value for RC11

(RC11_Pref_Init)

(rc11_pref_init) -23dB to -5 dB NA

Forward Link Smart

Blanking Duty Cycle

Value (FOR_FCH_BLANKING_

DUTYCYCLE)

(rev_blk_duty) 1 - Blanking

Disabled

NA

Reverse Link Smart

Blanking Duty Cycle

Value (REV_FCH_BLANKING_

DUTYCYCLE)

(rev_blk_duty) 1 - Blanking

Disabled

NA

3GE to 3G Hand Down

at T_ADD

(hd_3ge_to_3g) Range: 0 or 1 NA

3GE Voice QoF

Assignment

qof_3ge_voice Range: 0 or 1 NA

Feature Implementation Provisioning the ecp3g form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Value to be


Ack Mask for F-FCH

RC11 – RL Blanking

Disabled part 1

fack_msk_no_

rlb.part1

Range: 0000 - 1111

Recommended

value: 0000

Turn ON the F-FCH

early termination

when smart blanking

is disabled.

NA

Ack Mask for F-FCH

RC11 - RL Blanking

Disabled, part 2

(fack_msk_no_

rlb.part2)

Range: 0000 - 1111

Recommended

value: 0010

Turn ON the F-FCH

early termination

when smart blanking

is disabled.

NA

Ack Mask for F-FCH

RC11 - RL - Blanking

Disabled, part 3

(fack_msk_no_

rlb.part3)

Range: 0000 - 1111

Recommended

value: 0111

Turn ON the F-FCH

early termination

when smart blanking

is disabled.

NA

Ack Mask for F-FCH


Disabled, part 4

(fack_msk_no_

rlb.part4)

Range: 0000 - 1111

Recommended

value: 1100

Turn ON the F-FCH

early termination

when smart blanking

is disabled.

NA

Ack Mask for F-FCH


Enabled, part 1

(fack_msk_

rlb.part1)

Range: 0000 - 1111

Recommended

value: 0000

NA

Ack Mask for F-FCH


Enabled, part 2

(fack_msk_

rlb.part2)

Range: 0000 - 1111

Recommended

value: 0001

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-19



Value to be


Ack Mask for F-FCH


Enabled, part 3

(fack_msk_

rlb.part3)

Range: 0000 - 1111

Recommended

value: 0001

NA

Ack Mask for F-FCH


Enabled, part 4

(fack_msk_

rlb.part4)

Range: 0000 - 1111

Recommended

value: 1000

NA

Ack Mask for R-FCH

RC08, part 1

(msk_rc08.part1) Range: 0000, 0010,

1000, 1010

Recommended

value: 0000

Turn OFF the

R-FCH early

termination

NA

Ack Mask for R-FCH

RC08, part 2


1000, 1010

Recommended

value: 0000

Turn OFF the

R-FCH early

termination

NA

Ack Mask for R-FCH

RC08, part 3


1000, 1010

Recommended

value: 0000

Turn OFF the

R-FCH early

termination

NA

Ack Mask for R-FCH

RC08, part 4


1000, 1010

Recommended

value: 0000

Turn OFF the

R-FCH early

termination

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Procedure


...................................................................................................................................................................................................

1 Start the RC/V ecp3g form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the F-FCH PC Bit to Traffic Bit Ratio for RC3, RC4,

RC5 and RC11 field for 2-way.

Result: The ecp3g form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

3 Enter a value between 0 to 7.75 dB in the F-FCH PC Bit to Traffic Bit Ratio for RC3,

RC4, RC5 and RC11 for 3-way or more field based on the situation.

...................................................................................................................................................................................................

4 Enter a value between 0 to 7.75 dB in the F-FCH PC Bit to Traffic Bit Ratio for RC3,

RC4, RC5 and RC11 for 2-way field based on the situation.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-21

...................................................................................................................................................................................................

5 Advance to the screen that contains Central Bias Reference Power Level Initial Value

for RC11 field.


...................................................................................................................................................................................................

6 Enter a value between -23dB to -5 dB in the above field based on the situation.

...................................................................................................................................................................................................

7 Advance to the screen that contains Forward Link Smart Blanking Duty Cycle Value

field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1



...................................................................................................................................................................................................

8 Enter a value 1, 4, and 8 based on the situation.

...................................................................................................................................................................................................

9 In the same screen, enter value between 1 -15 for Reverse Link Smart Blanking Duty

Cycle Value field.

Result: The ecp3g form is provisioned for 1xAdvanced Air Interface Technology on

CMU-E feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-23

E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the cell3g form for 1x Advanced Air Interface


Purpose

This procedure provides instructions to provision the cell3g form.


The fields that you must populate in the cell3g form are described in Table 7-6, “Related

fields in the cell3g form” (p. 7-24)

Table 7-6 Related fields in the cell3g form


Values to be


Forward Link Smart Blanking

Duty Cycle Value

(FOR_FCH_BLANKING_

DUTYCYCLE)

(for_blk_duty) Blank NA

Reverse Link Smart Blanking

Duty Cycle Value

(REV_FCH_BLANKING_

DUTYCYCLE)

(rev_blk_duty) Blank NA


Radio Configuration RC4 in

simplex mode


(fpc_min_gain_rc4_

1)

-40 dB to -9 dB

Default = -15 dB

NA



two ways soft handoff


(fpc_min_gain_rc4_

2)

-40 dB to -6 dB

Default = -13 dB

NA



three or more ways soft

handoff (FPC_MIN_GAIN_RC4_

3)

(fpc_min_gain_rc4_

3)

-40 dB to -4 dB

Default = -11 dB

NA

3G Handoff Escalation due to

2G-Only Sector/Carrier

(3G_HO_Escal_by_

2G_Enabled)

(hoe3g_2g) 0 = Off, 1 = On

Default = 0

NA

Feature Implementation Provisioning the cell3g form for 1x Advanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Values to be


3G Handoff Escalation due to

Lack of 3G Resources (3G_

HO_Escal_by_Resources_

Enabled)

(hoe3g_no3g) 0 = Off, 1 = On

Default = 0

NA

Central Bias Reference Power

Level Initial Value for RC11

(RC11_Pref_Init)

(rc11_pref_init) blank, -23 dB to -5

dB

Default = blank

NA

1x Advanced Feature Enabled (enbl_1xadv) On, Off

Default = Off

NA

Reverse Power Control Mode

for 1xAdvanced Voice

(RPC_MODE)

(rpc_mode) 00 (if power

control rate is 200

to 400 bps), 01 (if

power control rate

is 200 bps)

Default = 00

NA


F-FCH for Radio Configuration

RC11 (FPC_FCH_FER_RC11_

VOICE)

(fpc_fch_fer_rc_rc11_

voice)

0.2%, 0.5%, 1.0 %,

1.5%, 2.0 %, 2.5 %,

3.0% (these values

are allowed by

IS-2000)

Default = 1%

NA

Forward Fundamental


Eb/Nt Setpoint for



simplex mode


1)

(vfpc_f1rc11msp) 0 dB to 12 dB

Default = 3dB

NA

Forward Fundamental

Channel (F-FCH) Initial Eb/Nt

Setpoint for 1xAdvanced

Voice Radio Configuration

RC11 in simplex mode


1)

(vfpc_f1rc11isp) 2 dB to 15 dB

Default = 8dB

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-25



Values to be


Forward Fundamental


Eb/Nt Setpoint for



simplex mode


1)

(vfpc_f1rc11xsp) 2 dB to 18 dB

Default = 8 dB

NA

Forward Fundamental


Eb/Nt Setpoint for

1xAdvanced Voice for Radio

Configuration RC11 with two

or more soft plus softer

handoff connections


2)

(vfpc_f2rc11msp) 0 dB to 8 dB

Default = 5 dB

NA

Forward Fundamental

Channel (F-FCH) Initial Eb/Nt

Setpoint for 1xAdvanced

Voice for Radio Configuration

RC11 with two or more soft

plus softer handoff

connections


2)

(vfpc_f2rc11isp) 2 dB to 10 dB

Default = 8 dB

NA

Forward Fundamental


Eb/Nt Setpoint for


Configuration RC11 with two

or more soft plus softer

handoff connections


2)

(vfpc_f2rc11xsp) 2 dB to 17 dB

Default = 9 dB

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Values to be




1xAdvanced Voice in Radio

Configuration RC11 for

Simplex (FPC_PWR_CNTRL_

STEP_RC11_1_VOICE).

(vfpc_rc11_step1) 0, 0.25 dB, 0.5 dB,

and 1.0 dB

Default = 1 dB

NA




Configuration RC11 for 2 or

more (FPC_PWR_CNTRL_STEP_

RC11_2_VOICE).

(vfpc_pc_step2) 0, 0.25 dB, 0.5 dB,

1.0 dB

Default = 1.0 dB

NA

Channel Adjustment Gain for

Reverse Acknowledgement

Channel 1 for RC11 for one

active set (REV_ACKCH_GAIN_

ADJ_ACS1)

(rev_ackch_gain1) -8 dB to 8 dB

Default = 0 dB

NA

Channel Adjustment Gain for

Reverse Acknowledgement

Channel 1 for RC11 for two

or more number of cells in

the active set

(REV_ACKCH_GAIN_ADJ_

ACS2PLUS)

(rev_ackch_gain2) -8 dB to 8 dB

Default = 0 dB

NA

Mobile Receive Diversity

offset to F-FCH Minimum

Gain for 1xAdvanced Voice

(MRD_MIN_GAIN_OFFSET_3G1X_

FCH)

(mrd_fmin_gain) -10 dB to 0 dB

Default = 0 dB

NA


Initial Setpoint Offset

(RLIC_REV_INIT_SETPT_

OFFSET)

(rlic_rl_ebno_int) -8 dB to 0 dB

Default = -1.5 dB

Recommended

value: 0

NA


Minimum Setpoint Offset

(RLIC_REV_MIN_SETPT_

OFFSET)

(rlic_rl_ebno_min) -8 dB to 0 dB

Default = -1.5 dB

Recommended

value: 0

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-27



Values to be



Maximum Setpoint Offset

(RLIC_REV_MAX_SETPT_

OFFSET)

(rlic_rl_ebno_max) -8 dB to 0 dB

Default = 0

Recommended

value: 0

NA

RLIC Offset for Access

Channel Open Loop

Adjustment

(AC_RLIC_OFFSET)

(rlic_ac_offset) -5 dB to 0 dB

Default = 0

NA

R-FCH Eb/Nt Step Up Size for

Reverse Outer Loop Power

Control for Radio

Configuration RC8

(RPC_FCH_STEP_UP_SETPT_

RC8)

(vrpcrc8_stepup) 0 dB to 1 dB

Default = 0.5 dB

NA


R-FCH for 8K VOCODER for


(RPC_FCH_FER_RC8_VOICE)

(vrpc_rc8fer) 0.2%, 0.5%, 1.0%,

1.5%, 2%, 2.5%,

3%

Default = 1%

NA

R-FCH Minimum Eb/Nt


Configuration RC8

(RPC_FCH_MIN_SETPT_RC8)

(vrpc_rc8mnsp) -4 dB to 3.75 dB

default = -0.5 dB

NA

R-FCH Initial Eb/Nt Setpoint

for Reverse Radio

Configuration RC8

(RPC_FCH_INIT_SETPT_RC8)

(vrpc_rc8isp) -3 dB to 7.75 dB

default = 2.5 dB

NA

R-FCH Maximum Eb/Nt


Configuration RC8

(RPC_FCH_MAX_SETPT_RC8)

(vrpc_rc8mxsp) -2 dB to 7.75 dB

Default = 2.5 dB

NA

Power Control Step Size

during RL Blanking

(PWR_CNTL_STEP_ZERO_

RATE)

(rlbpwr_cntl_step) 0.25 dB, 0.5 dB,

1.0 dB, 1.5 dB, 2.0

dB

Default = 1.0 dB

NA

N2m for Forward Link

Indicator

(for_n2m_ind) Range: 0 - 7 (or

NULL)

NA



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




Values to be



T_ADD

(hd_3ge_to_3g) Range: 0 or 1 (or

NULL)

NA

Procedure


...................................................................................................................................................................................................

1 Start the RC/V cell3g form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the Forward Link Smart Blanking Duty Cycle Value

field.

Result: The cell3g form is displayed, as shown in the following figure:



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-29

...................................................................................................................................................................................................

3 Disable the Smart Blanking by entering a value 1 in Forward Link Smart Blanking Duty

Cycle Value and Reverse Link Smart Blanking Duty Cycle Value fields.

...................................................................................................................................................................................................

4 Advance to the screen that contains RLIC Reverse Link Eb/Nt Setpoint Offset (dB)

Initial, Minimum.

Result: The cell3g form is displayed as shown:

...................................................................................................................................................................................................

5 Set Initial and Minimum RLIC Reverse Link Eb/Nt Setpoint Offset to 0.

...................................................................................................................................................................................................

6 Advance to the screen that contains F-FCH Minimum Gain for Radio Configuration RC4

in simplex mode.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The cell3g form is displayed as shown:

...................................................................................................................................................................................................

7 Enter appropriate values for F-FCH Minimum Gain for Radio Configuration RC4 in

simplex mode , F-FCH Minimum Gain for Radio Configuration RC4 for two ways soft

handoff , F-FCH Minimum Gain for Radio Configuration RC4 for three or more ways

soft handoff.

...................................................................................................................................................................................................

8 Advance to the screen that contains 3G Handoff Escalation due to 2G-Only

Sector/Carrier field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-31


...................................................................................................................................................................................................

9 Make desired entries for 3G Handoff Escalation due to 2G-Only Sector/Carrier, 3G

Handoff Escalation due to Lack of 3G Resources in the above form based on the

situation.

...................................................................................................................................................................................................

10 Advance to the screen that contains Central Bias Reference Power Level Initial Value

for RC11 field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1



...................................................................................................................................................................................................

11 Make the desired entry in Central Bias Reference Power Level Initial Value for RC11

field based on the situation.

...................................................................................................................................................................................................

12 Advance to the Reverse Power Control Mode for 1xAdvanced Voice field



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-33

Result: The ecp3g form opens up as shown in the following figure:

...................................................................................................................................................................................................

13 Set the Reverse Power Control (RPC) to 400 Hz (value of 00).

...................................................................................................................................................................................................

14 The cell3g form is provisioned for 1xAdvanced Air Interface Technology on CMU-E

feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the ceqface form for 1xAdvanced Air Interface


Purpose

This procedure provides instructions to provision the ceqface form.

Feature Implementation Provisioning the ceqface form for 1xAdvanced Air Interface


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-35


The fields that you must populate in the ceqface form are described in Table 7-7,

“Related fields in the ceqface form” (p. 7-36)

Table 7-7 Related fields in the ceqface form

Field name

Text RC/V

name Value to be entered Restrictions

Maximum Access

Channel Message

Capsule Size

(max_cap_sz) 3- 10, blank

Default = blank

Note: The total

size of ACH

capsule size and

ACH preamble

size should be

less than 15

If the ECP or

Cell RC/V

settings satisfy

the condition

that

(max_cap_sz +

pam_sz) < 15,

then there is no

need to change

the values. If

change is

required, then

the

recommended

values are:

• 7<=

max_cap_

sz<=10

• 2<= pam_sz

<=4

If values are

changed at cell

level, the user

will need to

manually enter

sector size on

CEQFACE form.

The value will

be the same used

at ECP level.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Table 7-7 Related fields in the ceqface form (continued)

Field name

Text RC/V

name Value to be entered Restrictions

Access Channel

Preamble Length

(pam_sz)

(pam_sz) 1 - 15, blank

Default = blank

Note: The total

size of ACH

capsule size and

ACH preamble

size should be

less than 15

If the ECP or

Cell RC/V

settings satisfy

the condition

that

(max_cap_sz +

pam_sz) < 15,

then there is no

need to change

the values. If

change is

required, then

the

recommended

values are:

• 7<=

max_cap_

sz<=10

• 2<= pam_sz

<=4

If values are

changed at cell

level, the user

will need to

manually enter

sector size on

CEQFACE form.

The value will

be the same used

at ECP level.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-37

Procedure


...................................................................................................................................................................................................

1 Start the RC/V ceqface form.

...................................................................................................................................................................................................

2 Advance to the screen that contains Maximum Access Channel Message Capsule Size

and Access Channel Preamble Length (frames) fields.

Result: The ceqface form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

3 Enter appropriate values in the above fields based on the situation.

...................................................................................................................................................................................................

4 Navigate to the screen that contains Carrier Assignment Algorithm field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The ceqface form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

5 Verify that the Carrier Assignment Algorithm field is set to rf.

Result: The ceqface form is provisioned for 1xAdvanced Air Interface Technology on

CMU-E feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-39

E N D O F S T E P S...................................................................................................................................................................................................

Provisioning the ceqface3g form for 1xAdvanced Air Interface


Purpose

This procedure provides instructions to provision the ceqface3g form.


The fields that you must populate in the ceqface3g form are described in the following

table:Table 7-8, “Related fields in the ceqface3g form” (p. 7-40)

Table 7-8 Related fields in the ceqface3g form

Field name Text RC/V Name Value to be entered Restrictions

Semi-Soft 3G

Carrier Selection

(ss_carr_3g) 0= Off, 1 =On

Default = 0

NA

3G 1x Load

Preference Delta

(ld_prf_dlta_ 3g1x) - 40 - 100 (Per Sector);

blank

NA

3GE Voice Load

Preference Delta

(�3GE) - Prim

(ld_prf_dlta_3ge) 40 - 100

Default = 40

NA

3GE Voice Load

Preference Delta

(�3GE) - Alt

(ald_prf_dlta_3ge) 40 - 100

Default = 40

NA

3GE Voice Load

Preference Delta

(�3GE) - Carriers

Using Alt

(ldpf_3ge_carr) y, blank (blank = n)

Default = blank

NA

QoF=0 Walsh Code

FCH Assignment

Threshold

(qof0wc_fch_thr) 0-128

Default = 128

NA

Procedure


...................................................................................................................................................................................................

1 Start the RC/V ceqface3g form.

...................................................................................................................................................................................................

2 Advance to the screen that contains the Semi-Soft 3G Carrier Selection field.

Feature Implementation Provisioning the ceqface3g form for 1xAdvanced Air

Interface Technology on CMU-E feature

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Result: The ceqface3g form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

3 Enter the appropriate values. Choose option ON or OFF based on the situation.

...................................................................................................................................................................................................

4 Advance to the screen that contains QoF Walsh code FCH Assignment Threshold field.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




7-41

Result: The ceqface3g form is displayed, as shown in the following figure:

...................................................................................................................................................................................................

5 Enter a value 128 in the QoF Walsh code FCH Assignment Threshold field.

...................................................................................................................................................................................................

6 Advance to the screen that contains 3GE Voice Load Preference Delta (�3GE) - Prim,

3GE Voice Load Preference Delta (�3GE) - Alt, 3GE Voice Load Preference Delta

(�3GE) - Carriers Using Alt and enter appropriate values based on the situation.

Result: The ceqface3g form is provisioned for 1xAdvanced Air Interface Technology

on CMU-E feature.



....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


E N D O F S T E P S...................................................................................................................................................................................................

8 8Related Documentation

Overview

Purpose

This chapter lists the documents related to 1xAdvanced Air Interface Technology on

CMU-E feature and associated feature functionalities listed in this document.

Contents

Related Documentation 8-1

Related Documentation

References

The following CDMA2000® network document are referenced in this document or

provide additional information that relates to the 1xAdvanced Air Interface Technology on

CMU-E feature.

• Text Recent Change and Verify (RC/V) Reference, 401-610-038

• Service Measurements, 401-610-135

• CMU-IVB Optional Feature Description, 401-612-857

• CDMA Modem Unit-V (CMU-V) Channel Card and Related Features Optional

Feature Description, 401-612-896

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




8-1

Related Documentation Related Documentation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Appendix A: Abbreviations

Overview

Purpose

This appendix lists the abbreviations used in this document along with their expansions.

Contents

Introduction A-1

Introduction

Numeric

1XA 1X Advanced

3GE 3G Enhancement, 1xA

3GE call 1xA call

3GE Mobile A 3G mobile capable of supporting 1xA Radio Configuration and Service

Option

A

ANSI American National Standards Institute

B

BTS Base Transceiver Station

C

CE Channel Element

CDM CDMA Digital Module

...................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




A-1

CDMA Code Division Multiple Access

CCU Channel Card Unit

CMU-E CDMA Modem Unit -E (Channel board for 1xA)

E

ECP Executive Cellular Processor

F

FAF Feature Activation File

FID Feature IDentification

H

HLR Home Location Register

I

IS-95B Interim Standards 95 B

M

MRD Mobile Receive Diversity

MSC Mobile Switching Center

O

OA&M Operation, Administration, and Maintenance

Q

QOF Quasi-Orthogonal Function

R

RC/V Recent Change/Verify

RC Radio Configuration

RLIC RL Interference Cancellation

S

SHLR Stand-alone HLR

SDP Status Display Page

Abbreviations Introduction

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

A-2 Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


T

TI Technician Interface

U

URC Universal Radio Controller


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




A-3


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

A-4 Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


Index

A availability, 1-4

market availability, 1-4

release availability, 1-4

.............................................................

F feature identifier, 1-1

feature summary, 1-2

.............................................................

I impact on user interfaces, 1-4

.............................................................

P prerequisites, 1-4

hardware requirements, 1-5

HLR configuration, 1-5

signaling requirements, 1-6

software requirements, 1-5

supported technologies, 1-4

....................................................................................................................................................................................................................................

Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1




IN-1

Index

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

IN-2 Alcatel-Lucent – Proprietary


Alcatel-Lucent CDMA

401-612-972 Releases 36.1 and 37.1


1xa air interface technology on cmue feature description 13627_22 & 13627_6

Documents