2 000 2 500 1 500 3 000 1 000 proven performance 3 500 500 4 … · 2021. 8. 19. · – drill rig:...

2
Test results show that Powerbit Underground provides 37 percent more drill metres on average before bit discard than a standard drill bit. The chart shows the location of the test mines used for testing. Proven performance Powerbit Underground has been put to the test in numerous drill tests. Before launch, we carried out thousands of drillings across the globe in collaboration with selected customers. The tests were made independently and offer strong evidence of the new bit’s superior performance. See for yourself! Australia 1 Australia 3 Mexico Canada 1 Canada 2 Macedonia Colombia Mongolia 504 637 439 381 256 218 267 227 257 141 114 99 66 43 280 404 Drill meters Standard bit avg Powerbit avg 700 600 500 400 300 200 100 0 37% more drill meters on average 6

Upload: others

Post on 09-Sep-2021

14 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 2 000 2 500 1 500 3 000 1 000 Proven performance 3 500 500 4 … · 2021. 8. 19. · – Drill rig: Tamrock Axera – Rock drill: Sandvik HLX5 – Flushing pressure: 2–6 bar at

6

Test results show that Powerbit Underground provides 37 percent more drill metres on average before bit discard than a standard drill bit. The chart shows the location of the test mines used for testing.

Proven performancePowerbit Underground has been put to the test in numerous drill tests. Before launch, we carried out thousands of drillings across the globe in collaboration with selected customers. The tests were made independently and offer strong evidence of the new bit’s superior performance. See for yourself!

ZinkgruvanBA 87

Sweden

ZinkgruvanBA 91

Sweden

B PenonChile

North MineCanada

Fraser MineCanada

Golden GroveAustratia

OrivesiFinland

LaisvallSweden

MeterR 32SR 35 Powerbit

4 500

4 000

3 500

3 000

2 500

2 000

1 500

1 000

500

0

Australia 1 Australia 3 Mexico Canada 1 Canada 2 Macedonia ColombiaMongolia

504

637

439

381

256

218

267

227

257

141114

99

6643

280

404

Drill metersStandard bit avgPowerbit avg

700

600

500

400

300

200

100

0

Lorem ipsumLorem ipsum

257 m

82%longer

service life

17%higher

penetration rate

141

180 m

150

200

100

150

175

75

2.17 m/min

1.85

20%longer

grinding interval

10%longer

service life

37%more drill meters on average

6

Page 2: 2 000 2 500 1 500 3 000 1 000 Proven performance 3 500 500 4 … · 2021. 8. 19. · – Drill rig: Tamrock Axera – Rock drill: Sandvik HLX5 – Flushing pressure: 2–6 bar at

7

MexicoSite characteristics The test mine is located in northern Mexico, in a district well-known for mining. The main mineral is zinc followed by lead and copper. The rock offers challenging conditions due to the presence of quartz, pyrite and magnetite.

MethodThe test was conducted in development drilling, both in waste rock and in the ore itself. Ten drillings were made to measure both drilled metres and penetration rate. The results are in comparison with a standard 45 mm bit.

Equipment– Drill rig: Tamrock Axera

– Rock drill: Sandvik HLX5

– Flushing pressure: 2–6 bar at 30–35 liters/min

– Drill bit: Powerbit Underground 45mm

– Buttons: Trubbnos trapezoid-shaped buttons

Results

Penetration rateStandard bit: 1.85 meters/min

Powerbit Underground: 2.17 meters/min

Service lifeStandard bit: 141 meters

Powerbit Underground: 257 meters

The average penetration rate was 17% higher with Powerbit Underground, which has a direct impact on the energy consumption of drilling.

The average service life was 82% longer with Powerbit Underground, which has a direct impact on the cost per metre for the bit.

The average grinding interval was almost 20% longer with Powerbit Underground. The bit proved highly effective on mixed rock, performing well in the igneous formations on site. The high flushing capacity was effective on soft clay pockets.

South KoreaSite characteristics Powerbit Underground was tested at a tunnelling project for a road construction, outside Seoul, South Korea. The test was conducted in excellent collaboration with the customer.

MethodThe test was conducted in igneous formations, which consists of medium to hard rock with pockets of clay. Powerbit Underground was benchmarked against a standard model 39 semi-ballistic bit.

Equipment– Drill rig: Epiroc Rocket Boomer E3

– Rock drill: Epiroc COP 3038 rock drills

– Drill bit: Powerbit Underground 45mm

– Buttons: Trubbnos trapezoid-shaped buttons

– Grinding equipment: Epiroc Grindmatic BQ3

Results

Grinding intervalStandard bit: 150 meters

Powerbit Underground: 180 meters

Service life10% longer

ZinkgruvanBA 87

Sweden

ZinkgruvanBA 91

Sweden

B PenonChile

North MineCanada

Fraser MineCanada

Golden GroveAustratia

OrivesiFinland

LaisvallSweden

MeterR 32SR 35 Powerbit

4 500

4 000

3 500

3 000

2 500

2 000

1 500

1 000

500

0

Australia 1 Australia 3 Mexico Canada 1 Canada 2 Macedonia ColombiaMongolia

504

637

439

381

256

218

267

227

257

141114

99

6643

280

404

Drill metersStandard bit avgPowerbit avg

700

600

500

400

300

200

100

0

Lorem ipsumLorem ipsum

257 m

82%longer

service life

17%higher

penetration rate

141

180 m

150

200

100

150

175

75

2.17 m/min

1.85

20%longer

grinding interval

10%longer

service life

37%more drill meters on average

A closer look at our testsSo how did we test Powerbit Underground? Let’s have a closer look at two of our test sites, specifically. Here we present some crucial test characteristics including typical rock type and equipment used.

ZinkgruvanBA 87

Sweden

ZinkgruvanBA 91

Sweden

B PenonChile

North MineCanada

Fraser MineCanada

Golden GroveAustratia

OrivesiFinland

LaisvallSweden

MeterR 32SR 35 Powerbit

4 500

4 000

3 500

3 000

2 500

2 000

1 500

1 000

500

0

Australia 1 Australia 3 Mexico Canada 1 Canada 2 Macedonia ColombiaMongolia

504

637

439

381

256

218

267

227

257

141114

99

6643

280

404

Drill metersStandard bit avgPowerbit avg

700

600

500

400

300

200

100

0

Lorem ipsumLorem ipsum

257 m

82%longer

service life

17%higher

penetration rate

141

180 m

150

200

100

150

175

75

2.17 m/min

1.85

20%longer

grinding interval

10%longer

service life

37%more drill meters on average

7