2-hardware description
TRANSCRIPT
All rights reserved © 2006, Alcatel- Alcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
Module 2Hardware Description
3FL57732AFAAWBZZA Edition 1.0
Section 2 Functional Description
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 2
Blank Page
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 3
Objectives
� to be able to identify and describe the functionality of each board that can be inserted into the 1642EM(C)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 4
Objectives [cont.]
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 5
Table of Contents
Switch to notes view!
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 6
Table of Contents [cont.]
Switch to notes view!
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 7
1 LS and HS Cards
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 8
1 LS and HS Cards
1.1 8 ports E1 board with Re-timing
(2) (3)(1)
ACRONYM SLOTS E1RCB8 2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) 8-channel 2.048Mbit/s service signal interface
(3) 2.048Mbit/s extended signal interface
ACRONYM SLOTS E1RCB8 Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 9
1 LS and HS Cards
1.2 8 ports E1 boards
A
B
CD
1 2 3 4 5 6 7 8 9 10 11 12
(1) (2)
ACRONYM SLOTS E1B8
DE1B8 SE1B8
SDE1B8
2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) 8-channel 2.048Mbit/s service signal interface
1642EMC
ACRONYM SLOTS E1B8
DE1B8 SE1B8
SDE1B8
Service slot
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 10
1 LS and HS Cards
1.3 28 ports E1 boards
(1) (2)
A
BC
D
1 2 3 4 5 6 7 8 9 10 11 12
ACRONYM SLOTS E1B28
DE1B28 SE1B28
SDE1B28
2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) 7-channel 2.048Mbit/s service signal interface
1642EMC
ACRONYM SLOTS E1B28
DE1B28 SE1B28
SDE1B28
Service slot
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 11
1 LS and HS Cards
1.4 32 ports E1 boards
ACRONYM SLOTS DE1B32 2 to 5
1642EMUX
(1) (2)
A
B
CD
1 2 3 4 5 6 7 8 9 10 11 12
LEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) 8-channel 2.048Mbit/s service signal interface
ACRONYM SLOTS DE1B32 Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 12
1 LS and HS Cards
1.5 8 ports E1 boards
ACRONYM SLOTS DE1JB8 2 to 5
1642EMUXLEGENDA(1)Tricolor LED:Green LED ON-units in operationRed LED ON-severity alarmYellow LED-common alarm
(2)2M service interface.
ACRONYM SLOTS DE1JB8 Service slot
1642EMC
(1) (2)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 13
1 LS and HS Cards
1.6 E3/DS3 boards
(1) (2)
ACRONYM SLOTS E3B1
DS3B1 2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) 1-channel 34/45Mbit/s service signal interface
ACRONYM SLOTS E3B1
DS3B1 Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 14
1 LS and HS Cards
1.7 OT1B1(N)
( 1) ( 5)( 4)( 3)( 2)
ACRONYM SLOTS OT1B1(N) 2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2), (3)Transparent channel F1 byte, E2 byte (4), (5) SC/PC optical fiber connector
ACRONYM SLOTS OT1B1(N) Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 15
1 LS and HS Cards
1.8 ET1B1(N)
(1) (2) (3) (4) (5)
ACRONYM SLOTS ET1B1(N) 2 to 5
1642EMUXLEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2), (3)Transparent channel F1 byte, E2 byte (4), (5) 1.0/2.3 coaxial connector
ACRONYM SLOTS ET1B1(N) Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 16
2 Common cards
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 17
2 Common cards
2.1 1642EMUX Main Board panel view
1. RUN LED
2. Not Urgent ALARM
3. Urgent ALARM
4. Q PORT
5. F PORT
6. Port #1 E2 PORT
7. Port #1 F1 PORT
8. Port #2 E2 PORT
9. Port #2 F1 PORT
19. OWM connector
20. OWM LED
21. OT1 alarm LED
22. OT2 alarm LED
23. OT1 Output
24. OT1 Input
25. Reset button
26. OT2 Output
27. OT2 Input
ACRONYM SLOTS MB4-1 1
1642EMUX 10. Housekeeping input0
11. Housekeeping input1
12. Housekeeping input2
13. Housekeeping output0
14. Housekeeping output1
15. Housekeeping output2
16. Debug port
17. 2M external clock output
18. 2M external clock input
(1) (2) (3) (4) (5) (6) (7) (8) (9)
(10)(11)
(12)(13)
(14)(15)
(16) (17) (18) (19)
(20)(21)
(22)
(23) (24) (25) (26) (27)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 18
2 Common cards
2.2 1642EMC Main Board (DC) panel view
1642EMC
1. Housekeeping port
2. Debug port
3. F port
4. Q port
5. ALM indicator
6. OTA work status indicator
7. OTB work status indicator
8. OTA module
9. OTB module
10. DC power supply interface
11. 2M external clock output port
12. 2M external clock input port
13. Reset button
14. 1-7channel 2M service interface
15. 8-14channel 2M service interface
16. DC power supply interface
17. Power supply switch
18. Service slot which can be plugged into other kin ds of service board.
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 19
2 Common cards
2.3 1642EMC Main Board (AC) panel view
1642EMC
1. Housekeeping port
2. Debug port
3. F port
4. Q port
5. ALM indicator
6. OTA work status indicator
7. OTB work status indicator
8. OTA module
9. OTB module
10. 5A Fuse
11. 2M external clock output port
12. 2M external clock input port
13. Reset button
14. 1-7channel 2M service interface
15. 8-14channel 2M service interface
16. AC power supply interface
17. Power supply switch
18. Service slot which can be plugged into other kin ds of service board.
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 20
2 Common cards
2.4 DC48B Power supply interface board
ACRONYM SLOTS DC48B 6
1642EMUX
LEGENDA
(1) Power supply switch
ON means the power supply switch is in the connecte d status
OFF means the power supply switch is in the disconn ected status
(2)–24V/48V DC power supply interface, D 3-terminal connector
(3)The voltage label on the power supply connector terminal “-24V/48V”
(4)The voltage label on the power supply connector terminal “protective grounding”
(5)The voltage label on the power supply connector terminal “GND”
(1)
(2)
(3)
(4)
(5)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 21
2 Common cards
2.5 AC220B
(1)
ACRONYM SLOTS AC220B 6
1642EMUX
LEGENDA
(1) Power supply switch
ON means the power supply switch is in the connecte d status
OFF means the power supply switch is in the disconn ected status
(2) 230V AC power supply interface, D 3-terminal co nnector
(2)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 22
2 Common cards
2.6 PBP48 power supply panel
� Under –48V power system,the single board in 1642EM equipment provides the whole system with 3.3V and 5V power supply and is located on the front of the equipment
� Boards connected with it are DC48B, FB and BACKPLANE
� Main functions:� Converts from -48V power supply to 3.3V power supply� Converts from -48V power supply to 5V power supply� -48V input power backup� Alarm indicating function of the equipment� The intrinsic data of the board can be obtained through the network
management system
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 23
2 Common cards
2.7 PBP24 power supply panel
� Under –24V power system,the single board in 1642EM equipment provides the whole system with 3.3V and 5V power supply and is located on the front of the equipment
� Boards connected with it are DC48B, FB and BACKPLANE
� Main functions:� Converts from -24V power supply to 3.3V power supply� Converts from -24V power supply to 5V power supply� -24V input power backup� Alarm indicating function of the equipment� The intrinsic data of the board can be obtained through the network
management system
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 24
2 Common cards
2.8 FB
ACRONYM SLOTS FB 7
1642EMUX
LEGENDA
(1) –24V/48V DC power supply interface, D 3-termina l connector.
(2)The voltage label on the power supply connector terminal “GND”;
(3)The voltage label on the power supply connector terminal “protective grounding”;
(4)The voltage l label on the power supply connecto r terminal “-24V/48V”
(1)(2)
(3)
(4)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 25
2 Common cards
2.9 SFB
� Three fans are installed on this board� The function of SFB in 1642EM equipment is to improve
the operating temperature environment of the equipment� The single board is inserted and fixed in No.7 slot of the
frame
ACRONYM SLOTS SFB 7
1642EMUX
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 26
3 ISA cards
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 27
3 ISA cards
3.1 ISA-ES1 8FE
ACRONYM SLOTS ISA-ES1 8FE 2 to 3
1642EMUX
LEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2)-(9) RJ45 connector: Ethernet port 1-8
(10) Ethernet interface LINK/ACTIVE status indicating lamp:
ON means LINK status;
Flash means ACTIVE status
(11) Ethernet interface 10M/100M rate indicating lamp:
OFF means 10M rate;
ON means 100M rate
(1) (2) (3) (4) (5) (6) (7) (8) (9)
(10) (11)
ACRONYM SLOTS ISA-ES1 8FE Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 28
3 ISA cards
3.2 ISA-ES1 3FE
ACRONYM SLOTS ISA-ES1 3FE 2 to 3
1642EMUX
LEGENDA(1) Multicolour LED:
Red LED - local unit alarmGreen LED - in service unitYellow LED ON-common alarm
(2) SFP optical connector: Ethernet port 1
(3)(4) RJ45 connector: Ethernet port 2-3
(5) Ethernet interface LINK/ACTIVE status indicating lamp:
ON means LINK status;
Flash means ACTIVE status
(6) Ethernet interface 10M/100M rate indicating lamp:
OFF means 10M rate;
ON means 100M rate
(1) (2) (3) (4)
(5) (6)
ACRONYM SLOTS ISA-ES1 3FE Service slot
1642EMC
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 29
Answer the Questions
� 1. Pls. Write down the name of E1 re-timing service board�_______________________________
� 2. The main functions of E1RCB8 are�___________________ �___________________ �___________________�___________________
� 3. How many E3 signals can the E3B1 access?�1�2�3
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 30
Answer the Questions
� 4. What is the card that implements EC, SC, matrix and synchronization circuits?�______________________________________
� 5. What’s the difference between the SCM & ECM?�______________________________________�______________________________________
� 6. Is the EC protected?�______________________________________
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 31
4 Summarized Test
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 32
4 Summarized Test
▼ Configure the 1642EMUX using the labels below. Attention, the E1RCB8 should use DCC channel
� MB4-1 with 2 x S-4.1� DE1B32� E1RCB8� ISA-ES1 8FE� ET1B1� FB� DC48B
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 33
5 Appendix 1 - 2Mbit/s Frame
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 34
Bit number
Alternate frames1 2 3 4 5 6 7 8
Si 0 0 1 1 0 1 1Frame containingthe frame
alignement signal Note 1 Frame alignement signal
Si 1 A Sa4 Sa5 Sa6 Sa7 Sa8Frame notcontaining the
frame alignementsignal
Note 1 Note 2 Note 3 Note 4
2.5 Appendix 1 - 2Mbit/s Frame
basic frame
▼ The synchronous 2048 Kbit/s signal is structured on a 256-bits frame, numbered 1 to 256; it is composed by 32 time slots (TS), numbered 0 to 31 (TS0 to TS31), each time slot containing 8 bits. The frame repetition rate is 8000 Hz (time period 125 ms).
▼ TS0 is used as the OverHead of the frame, for purposes as: frame alignment, error integrity check, messaging, etc.
▼ The following figure shows the allocation of bits 1 to 8 (i.e. Time Slot 0, TS0) in the basic frame structure of synchronous 2Mbit/s signal.
▼ The frames contain, alternatively, the 7-bits frame-alignment-signal (FAS = 0011011, bits 2 to 8). (ITU-T G.704)
Note 1 - Si = bits reserved for international use. One specific use is for multi-frame alignment and for CRC-4
procedure.
Note 2 - this bit is fixed at 1 to assist in avoiding simulations of the frame alignment signal.
Note 3 - A = Remote Alarm Indication (RAI). In undisturbed operation, set to 0; in alarm condition, set to 1.
Note 4 - Sa4 to Sa8 are used for point-to-point specific messaging.
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 35
Note 1 - E = Remote Error Indication (REI) .In undisturbed operation, set to 1; in alarm condition, set to 0.
Note 2 - Sa4 to Sa8 are used for point-to-point specific messaging.
Note 3 - C1 to C4 = Cyclic Redundant Check-4 bits.
Note 4 - A = Remote Alarm Indication (RAI).In undisturbed operation, set to 0; in alarm condition, set to 1.
Note 5 - MF1 to MF6 = Multiframe Alignment Signal (MAS = 001011).
2.5 Appendix 1 - 2Mbit/s Frame
CRC-4
� The following figure shows the allocation of bits 1 to 8 (i.e. Time Slot 0, TS0) in the CRC-4 multiframestructure of synchronous 2Mbit/s signal. CRC-4 is the abbreviation for Cyclic Redundant Check-4, a signal elaboration procedure to check the error integrity.
� Each CRC-4 multiframe, which is composed of 16 frames numbered 0 to 15, is divided into two 8-frame sub-multiframes (SMF), designated SMF-I and SMF-II which signify their respective order of occurrence within the CRC-4 multiframe structure. Each sub-multiframe duration is 1 ms, rated 1000 Hz. The SMF is the CRC-4 block size (i.e. 2048 bits).
� Refer to ITU-T G.704 rec. for details information.
Bits 1 to 8 of the frameSub-multiframe
(SMF)
Framenumber 1 2 3 4 5 6 7 8
I
01234567
C1MF1C2
MF2C3
MF3C4
MF4
01010101
0A0A0A0A
1Sa4
1Sa4
1Sa4
1Sa4
1Sa5
1Sa5
1Sa5
1Sa5
0Sa6
0Sa6
0Sa6
0Sa6
1Sa7
1Sa7
1Sa7
1Sa7
1Sa8
1Sa8
1Sa8
1Sa8
Mul
tifra
me
II
89101112131415
C1MF5C2
MF6C3E
C4E
01010101
0A0A0A0A
1Sa4
1Sa4
1Sa4
1Sa4
1Sa5
1Sa5
1Sa5
1Sa5
0Sa6
0Sa6
0Sa6
0Sa6
1Sa7
1Sa7
1Sa7
1Sa7
1Sa8
1Sa8
1Sa8
1Sa8
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 36
2.5 Appendix 1 - 2Mbit/s Frame
ISDN-PRA
▼The ISDN-PRA (Integrated Services Digital Network - Prim ary Rate Access) is a facility to carry a number of synchronous digital communication channels to the user over a 2048 kbit/s structured signal; the ISDN- PRA structure is defined in recommendation ETS 300 233.
▼Organization of ISDN - PRA frames
� For each direction of transmission the following functions are provided by the
synchronous ISDN-PRA 2048 Kbit/s frames (refer to recommendation ETS 300 233):
�30 time slots at 64 kbit/s (numbered 1 to 15 and 17 to 31) for the transport of any
appropriate allocation of the B, H0 and H1 channels.
�1 time slot at 64 kbit/s (numbered 16) for the transport of a D channel.
�1 time slot at 64 kbit/s (numbered 0) for frame alignment, multiframe alignment,
CRC-4 procedure and maintenance (rec. G.704)
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 37
2.5 Appendix 1 - 2Mbit/s Frame
ISDN-PRA
▼ISDN - PRA communication channels
� The communication channels transported by the ISDN-PRA (Integrated
Services Digital Network - Primary Rate Access) signal are the following:
�B-channel it is rated 64 kbit/s, as defined in ITU-T Rec. I.412; it permits the
allocation of up to 30 independent B-channels over the 2Mbit/s synchronous frame.
�H0-channel it is rated 384 kbit/s, as defined in ITU-T Rec. I.412; it permits the
allocation of up to 5 independent H0-channels over the 2Mbit/s synchronous frame.
�H1-channel it is rated 1920 kbit/s, as defined in ITU-T Rec. I.412; it permits the
allocation of one H1-channel over the 2Mbit/s synchronous frame.
�D-channel it is rated 64 kbit/s, as defined in ITU-T Rec. I.412.
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 38
2.5 Appendix 1 - 2Mbit/s Frame
ISDN-PRA
Notes :PBX = Private Branch ExchangeNT = Network TerminationTE = Terminal EquipmentISDN = Integrated Services Digital NetworkPRA = Primary Rate Access
OMSN
NT
NT2
Synchronous2Mbit/s ISDN-PRA
(PBX)
TE TE TE
User communication channels may be:30 x 64kbit/s
5 x 384kbit/s
1 x 1920kbit/s
STM-N STM-N
2Mbit/s Access card +
ISDN-PRA Port card
Functional Description - Hardware Description
All rights reserved © 2006, AlcatelAlcatel 1642EMUX R3.0 & 1642EMC R1.2 O&M
2 - 2 - 39
End of ModuleHardware Description