2 tekflo pvc pipe fittings brochure
DESCRIPTION
waterTRANSCRIPT
-
DUCTILE IRON FITTINGS
for PVC PIPE
Ductile Iron
Fittings
For
PVC
Pipes
Value, Performance & Quality
Fusion Bonded Epoxy Coated Bitumen Coated
FITTINGS
www.incledon.co.za
DPI TradingDPI Trading
www.dpitrading.co.za
PROUDLY SUPPLIED BY
SANS 52842:2007
Technical Catalogue
-
Incledon offers a comprehensive range of high performance fittings combining the inherent strength of ductile iron with a push-fit joint and the reliable sealing
system of PVC pipe. The features of the Tekflo Ductile Iron Fittings range include:
1. SpecificationTekflo utilises modern casting techniques and ductile iron(SG42) as standard to allow for optimisation of design and strength. The fittings
conform to (EN 12842.2000) standards. All fittings are rated for operating working pressures of 16BAR (0-25C)
The Tekflo fittings are SABS approved in accordance with the SANS 52842:2007 specification
2. DeflectionThe Tekflo fitting range is capable of 5 Degree angular deflection and longitudinal withdrawal with no loss in performance. The joint is sufficiently flexible
to accommodate for ground movement along a installed pipeline and to allow for adjustment of the route during laying.
3. Fusion Bonded Epoxy / Bitumen CoatingThe Tekflo fusion bonded epoxy fittings are coated internally and externally to a minimum thickness of 250 microns. The coating is suitable for potable
water and eliminates microbial corrosion, known as Tramline Corrosion. Fittings are also available with a bitumen coating.
4. Ease of InstallationThe Tekflo range has been designed, with special care around the socket profile and sealing systems to ensure ease and speed on installation and
dismantling.
5. Extensive Product RangeTekflo features the largest and most comprehensive range of flanged and socketed ductile iron fittings, available in diameter 50mm through to 315mm.
FLANGED ADAPTORS( FIXED FLANGE)
Flange drillings available in SABS 1123/BS4504 Table 10/16, Bs10
Table D as well as a Multi-drilled option.
DNL
dn
END CAPS
TEKFLO Ductile Iron Fittings
DN
A
L
Dimensions
Dimensions
DN (mm) 50 63 75 90 110 160 200 250 315
dn (mm) 50 50 80 80 100 150 200 250 300
L (mm) 80 90 100 120 130 160 180 190 220
Weight (kg) 2.5 3.8 4.6 4.8 5.8 10.4 16.7 28.6 38.2
PN (Bar) 16 16 16 16 16 16 16 16 16
DN (mm) 50 63 75 90 110 160 200 250 315
L (mm) 105 115 140 155 158 185 210 230 250
A (mm) 85 90 110 125 130 150 170 185 200
Weight (kg) 1.2 1.7 2.2 2.9 3.7 6.3 9.4 14.7 20.9
PN (Bar) 16 16 16 16 16 16 16 16 16
DUCTILE IRON
FITTINGS
SANS 52842:2007
-
REPAIR COUPLING
DN
L
L
Dimensions
DN (mm) 63 75 90 110 160 200 250
L (mm) 180 205 240 270 300 310 390
Weight (kg) 3.0 4.5 5.9 8.4 15.4 19.8 25.8
PN (Bar) 16 16 16 16 16 16 16
DN
dn
L
SOCKETED REDUCERS Dimensions
DN (mm) 75 90 90 110 110 110 160 160 200 200 250 250
dn (mm) 63 63 75 63 75 90 90 110 110 160 160 200
L+5 (mm) 210 215 225 260 275 260 290 335 390 360 380 400
Weight (kg) 3.2 3.5 4.2 4.4 5.0 5.0 7.5 8.0 12.1 13.2 19.8 21.8
PN (Bar) 16 16 16 16 16 16 16 16 16 16 16 16
REDUCER SPIGOT & SOCKETED
dn
L
DN
Dimensions
DN (mm) 63 75 75 90 90 110 110 110 160 160 200 200
dn (mm) 50 50 63 63 75 63 75 90 90 110 110 160
L (mm) 120 140 145 155 155 165 165 170 185 190 215 220
Weight (kg) 2.5 5.1 5.5 5 5.5 7.4 6.4 8.5 19 19.5 20.6 24.7
PN (Bar) 16 16 16 16 16 16 16 16 16 16 16 16
EQUAL TEES
H
dn
DN
L
Dimensions
Dn (mm) 50 63 75 90 110 160 200 250
DN (mm) 50 63 75 90 110 160 200 250
H5 (mm) 59 130 150 164 190 250 295 301
L5 (mm) 214 285 305 340 370 500 585 625
Weight (kg) 2.5 4.3 5.6 7.2 9.7 17.6 27.5 43.5
PN (Bar) 16 16 16 16 16 16 16 16
DUCTILE IRON
FITTINGS
SANS 52842:2007
-
REDUCING TEES
H
dn
DN
L
SCOUR TEES
285
240
150
Water line 2-1.5*90
L
H
HYDRANT TEES
Water line 2-1.5*90
L
H
DN
Dimensions
Dimensions
Dimensions
DN (mm) 110 160 200 250
dn (mm) 100 100 100 100
H (mm) 165 185 220 230
L (mm) 347 385 519 507
Weight (kg) 11.8 15.8 23.1 39.3
PN (Bar) 16 16 16 16
DN (mm) 75 90 110 160 200 250
dn (mm) 80 80 80 80 80 80
H (mm) 338 340 360 380 470 488
L (mm) 145 150 160 180 210 230
Weight (kg) 7.4 8.7 10.3 15.5 21.2 32.7
PN (Bar) 16 16 16 16 16 16
DN (mm) 75 75 90 90 110 110 110 160 160 160 160 200 200 200 250 250
dn (mm) 50 63 63 75 63 75 90 63 75 90 110 90 110 160 160 200
H5 (mm) 130 135 145 150 165 170 190 215 220 225 230 225 235 270 285 295
L5 (mm) 295 295 275 290 360 335 380 390 410 430 450 470 485 540 563 630
Weight (kg) 4.7 5.0 6.0 6.5 7.8 8.2 8.7 11.8 12.5 13.4 14.5 19.0 20.4 24.2 36.3 38.0
PN (Bar) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
Flange drillings available in SABS 1123/BS4504 Table
10/16, Bs10 Table D as well as a Multi-drilled option.
Flange drillings available in SABS 1123/BS4504 Table
10/16, Bs10 Table D as well as a Multi-drilled option.
INCLEDONGERMISTON Tel: 011 323 0800
KLERKSDORP Tel: 018 469 4466 NORTHRIDING Tel: 011 462 7555
BLOEMFONTEIN Tel: 051 435 7364 KATHU Tel: 053 723 2213
NELSPRUIT Tel: 013 752 3121
SECUNDA Tel: 017 631 4200
EAST LONDON Tel: 043 736 6022 PORT ELIZABETH Tel: 041 404 1800DURBAN Tel: 031 716 2200
POLOKWANE Tel: 015 293 0312
LEPHALALE Tel: 014 763 5824
PRETORIA Tel: 012 653 8520
BURGERSFORT Tel: 013 231 7224
DPI TRADING (Western Cape)CAPE TOWN Tel: 021 957 5600 GEORGE Tel: 044 874 2327
DUCTILE IRON
FITTINGS
SANS 52842:2007
Page 1Page 2Page 3Page 4