2008-2009 price guide - r. conrader price guide ... rcb $6.40 rcl $9.90 sa-sealed adjustment $6.00...
TRANSCRIPT
• IN-TANK CHECK VALVE
• IN-LINE CHECK VALVE
• BRONZE CHECK VALVE
• UNLOADER PILOT VALVE
• PILOTED UNLOADER VALVE
• COMBINATION PILOTED
DISCHARGE & CHECK VALVE
e
• BULLWHIP THROTTLE CONTROL
• AIRLINE THROTTLE CONTROL
• SAFETY VALVE
• AIR ACTUATED DISCHARGE
• SMART START
• AUTOMATIC DRAIN VALVE
• REPAIR KITS
Conrader Controls Compressors
PH: 814-898-2727
WWW.CONRADE2008-2009 Price Guid
FXR.COM
: 814-898-3512Inlet Outlet Part Number Price 3/8” 3/8” CTC3838 $7.69 5/16” 1/2" CTC51612 $8.60 3/8” 1/2" CTC3812 $8.60 1/2" 1/2" CTC1212 $8.60 ½” 3/4" CTC1234 $11.93 3/4" 1/2" CTC3412 $11.93 3/4" 3/4" CTC3434 $11.93 3/4" 1” CTC341 $16.13
Inlet Outlet Part Number Price 3/8” 3/8” CTD3838 $8.65 5/16” 1/2" CTD51612 $9.57 3/8” 1/2" CTD3812 $9.57 1/2" 1/2" CTD1212 $9.57 1/2" 3/4" CTD1234 $12.58 3/4" 1/2" CTD3412 $12.58 3/4" 3/4" CTD3434 $12.58 3/4" 1” CTD341 $17.18
Inlet Outlet Part Number Price 3/8” 1/2" CAC3812-NF $9.89 3/8” 1/2" CAC3812-SU3-T $10.43 1/2" 1/2" CAC1212 $10.21
Inlet Outlet Part Number Price 1/2" 1/2" CTF1212 $12.63 5/8” 1/2" CTF5812 $14.24 5/8” 3/4" CTF5834 $15.86 3/4" 3/4" CTF3434 $15.86 Inlet Outlet Part Number Price 1/2" 1/2" CTG1212 $10.97 3/4" 3/4" CTG3434 $15.80 5/8” 3/4" CTG5834 $15.80 5/8” 3/4" CTG5834-12 $15.80
Inlet Outlet Part Number Price 1/4" 1/2" CTA1412 $7.53 3/8” 1/2" CTA3812 $7.53 1/2" 1/2" CTA1212 $8.60 1/2" 3/4" CTA1234 $11.61 1/2" 1” CTA121 $16.13 3/4" 3/4" CTA3434 $11.93 3/4" 1” CTA341 $16.13 3/4" 1 ½” CTA34112 $81.70 3/4" 1 ½-1” CTA34112-1 $81.70 1” 1” CTA11 $21.39 1” 1 ¼” CTA1114 $44.62 1 ¼” 1 ¼” CTA114114 $44.62 1 ½” 1 ½” CTA112112 $75.25
Inlet Outlet Part Number Price 1/4" 1/2" CTB1412 $8.28 3/8” 1/2" CTB3812 $8.28 1/2" 1/2" CTB1212 $9.57 1/2" 3/4" CTB1234 $12.151/2" 1” CTB121 $16.883/4" 3/4" CTB3434 $13.653/4" 1” CTB341 $17.183/4" 1 ½” CTB34112 $86.001” 1” CTB11 $22.751” 1 ¼” CTB1114 $41.781 ¼” 1 ¼” CTB114114 $41.781 ½” 1 ½” CTB112112 $77.40
CHECK VALVES: IN-TANK CTA Inlet: Female Pipe Outlet: NPT, no unloader port on hex
CTD Inlet: Compression Fitting Outlet: NPT, w/1/8” unloader port
CAC Inlet: Compression Fitting Outlet: NPT, w/1/8” unloader port on hex 120° from inlet
CTC Inlet: Compression Fitting Outlet: NPT, no unloader port on hex
CTG Inlet: Inverted Flare Inlet Outlet: NPT, (2) 1/8” unloader ports, one with inverted flare
CTF Inlet: JIC Flare Inlet Outlet: NPT, 1/8” unloader port
CTB Inlet: Female Pipe Outlet: NPT, 1/8” unloader port
CHECK VALVES: IN-LINE
CLA Inlet: Female NPT Outlet: Female NPT, no unloader port
CLB Inlet: Female NPT Outlet: Female NPT, with 1/8” unloader port
Inlet Outlet Part Number Price 1/4" 1/4" CLA14 $11.83 3/8” 3/8” CLA38 $13.33 1/2" 1/2" CLA12 $16.77 3/4" 3/4" CLA34 $21.72 1” 1 CLA1 $45.90 1 1/2” 1 1/2 CLA112 $126.85
Inlet Outlet Part Number Price
1/4" 1/4" CLC14 $14.46
Inlet Part Number SCF1/8” GV18 12 1/4" GV14 12 3/8” GV38 22 1/2" GV12 38 3/4" GV34 60 1” GV1 1151-1/4” GV114 1601/1/2” GV112 1602” GV2 220
CLC14 Inlet: female NPT Outlet: Male NPT Control line check valve
Thread Sealant $1.14
P1: Extra 1/8P2: Extra 1/4
BRONZE CHECK
GV Max PressMax Tem
Inlet Outlet Part Number Price 1/4" 1/4" CLB14 $13.33 3/8” 3/8” CLB38 $14.84 1/2" 1/2" CLB12 $18.17 3/4" 3/4" CLB34 $24.19 1” 1’ CLB1 $48.03 1 ½” 1 ½” CLB112 $132.23
M
SU3-$4.10
” Port $1” Port $1
VAL
ure: 250perature:
Check Valve Options
Start Unloader
.60 .60
VES
Price $15.25 $15.57 $18.62 $24.08 $31.02 $67.23 $99.84 $107.00 $169.52
PSI 450°
PILOTED UNLOADER VALVES
UNLOADER PILOT VALVES
RCB RCT RCL RCL-S
Outlet Pressure Range Other Features Price Female 1/8” Female 20-250 psi Replaceable inlet filter $26.60Male 1/8” Female 20-250 psi Replaceable inlet filter $26.60Female 1/8” Female 20-250 psi 3/8” mounting boss opposite outlet $32.20Female 1/4" Female 20-1200 psi Replaceable inlet filter $56.00Female 1/4" Female 20-1200 psi Removable side mounted strainer $69.00
UNLOADER PILOT OPTIONS
nd er
$2.40 $4.60
CP-Clean Out Port for RCL-S $16.30
DC-Dual Control RCB $6.40 RCL $9.90
SA-Sealed Adjustment $6.00
Inlet
Outlet
Plain Stem
P/N InletRCB 1/4" RCB-M 1/4" RCT 1/4" RCL 3/8” RCL-S 3/8”
HU-HaUnloadRCB RCL
Plain Stem
P
PILOTED UNLOADER OPTIONS
Discharge Inlet ilot Inlet
Vent
Dual Control
Hand Unloader
M-Felt Muffler (for models 1 & 2) $2.60
SA- Sealed Adjustment $6.00
Throttle Port
P/N Discharge Inlet Pilot Inlet Vent Stem SCFM Price B1 1/4" Compression 1/4” Male Direct Unported Plain Stem 20 $40.80 B2 1/4" Female 1/4” Male Direct Unported Plain Stem 20 $40.80 B3 1/4" Compression 1/4” Male 1/4" Female Plain Stem 20 $45.00 B4 1/4" Female 1/4” Male 1/4" Female Plain Stem 20 $45.00 BE1 1/4" Compression 1/4” Male Direct Unported Dual Control 20 $46.20 BE2 1/4" Female 1/4” Male Direct Unported Dual Control 20 $46.20 BE3 1/4" Compression 1/4” Male 1/4" Female Dual Control 20 $50.20 BE4 1/4" Female 1/4” Male 1/4" Female Dual Control 20 $50.20 BG1 1/4" Compression 1/4” Male Direct Unported Hand Unloader 20 $46.20 BG2 1/4" Female 1/4” Male Direct Unported Hand Unloader 20 $46.20 BG3 1/4" Compression 1/4” Male 1/4" Female Hand Unloader 20 $50.20 BG4 1/4" Female 1/4” Male 1/4" Female Hand Unloader 20 $50.20 BL 1/2" Female 1/4" Female 1/2" Female Plain Stem 60 $79.68 BLE 1/2" Female 1/4" Female 1/2" Female Dual Control 60 $86.48 BLG 1/2" Female 1/4" Female 1/2" Female Hand Unloader 60 $86.48
NS Plain Stem
DP
t
NS-SERIES PILOTED DISCHARGE CHECK VALVES
Top Inle
ischarge ort
NSG Hand Unloader
NSDC Dual Control
*Olocthro
Outlet Fitting
SU3- Start Unloader Installed
$4.10
SA- SeaAdjustm
$6.00
Throttle Port
ptional side inlet ated 180° from ttle port
Inlet Outlet SCFM P/N Price P/N Price P/N Price 1/2" Female Top 1/2" Female 18 NS-1 $55.60 NSDC-1 $62.20 NSG-1 $58.20 1/2" Female Side 1/2" Female 18 NS-2 $55.60 NSDC-2 $62.20 NSG-2 $58.20 1/2" Compression Top 1/2" Female 18 NS-3 $55.60 NSDC-3 $62.20 NSG-3 $58.20 1/2" Compression Side 1/2" Female 18 NS-4 $55.60 NSDC-4 $62.20 NSG-4 $58.20 1/2" Female Top 1/2" Male 18 NS-5 $55.60 NSDC-5 $62.20 NSG-5 $58.20 1/2" Female Side 1/2" Male 18 NS-6 $55.60 NSDC-6 $62.20 NSG-6 $58.20 1/2" Compression Top 1/2" Male 18 NS-7 $55.60 NSDC-7 $62.20 NSG-7 $58.20 1/2" Compression Side 1/2" Male 18 NS-8 $55.60 NSDC-8 $62.20 NSG-8 $58.20 3/8” Female Top 1/2" Female 18 NS-9 $55.60 NSDC-9 $62.20 NSG-9 $58.20 3/8” Female Side 1/2" Female 18 NS-10 $55.60 NSDC-10 $62.20 NSG-10 $58.20 3/8” Compression Top 1/2" Female 18 NS-11 $55.60 NSDC-11 $62.20 NSG-11 $58.20 3/8” Compression Side 1/2" Female 18 NS-12 $55.60 NSDC-12 $62.20 NSG-12 $58.20 3/8” Female Top 1/2" Male 18 NS-13 $55.60 NSDC-13 $62.20 NSG-13 $58.20 3/8” Female Side 1/2" Male 18 NS-14 $55.60 NSDC-14 $62.20 NSG-14 $58.20 3/8” Compression Top 1/2" Male 18 NS-15 $55.60 NSDC-15 $62.20 NSG-15 $58.20 3/8” Compression Side 1/2" Male 18 NS-16 $55.60 NSDC-16 $62.20 NSG-16 $58.20
Other Available Fittings Inlet: ¼” FNPT, ¼” MNPT, 3/8” MNPT, 3/8” FNPT, 3/8” Compression ADD $1.00 TO LIST
Outlet: 3/8” FNPT, 3/8” MNPT, 1/4” FNPT
led ent
SS- Sealed Male Threads $1.14
NS-SERIES OPTIONS
P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60
ADD $1.00 TO LIST
M-Installed Muffler $4.10
N-SERIES PILOTED DISCHARGE CHECK VALVES
Optional Side or Top Inlet
ADD $2.00 TO LIST
SU3- Start Unloader Installed
$4.10
SA- Sealed Adjustment
$6.00
SS- SeaThr$1
N-SE
NG N Plain Stem
NDC
Discharge Port
t
Pilot Port
Hand Unloader Dual Control
Inlet Outlet SCFM P/N Price P/N Price P/N Price 1/2" Female Top 1/2" Female 30 N-1 $65.30 NDC-1 $72.70 NG-1 $67.40 1/2" Female Side 1/2" Female 30 N-2 $65.30 NDC-2 $72.70 NG-2 $67.40 1/2" Compression Top 1/2" Female 30 N-3 $65.30 NDC-3 $72.70 NG-3 $67.40 1/2" Compression Side 1/2" Female 30 N-4 $65.30 NDC-4 $72.70 NG-4 $67.40 1/2" Female Top 1/2" Male 30 N-5 $65.30 NDC-5 $72.70 NG-5 $67.40 1/2" Female Side 1/2" Male 30 N-6 $65.30 NDC-6 $72.70 NG-6 $67.40 1/2" Compression Top 1/2" Male 30 N-7 $65.30 NDC-7 $72.70 NG-7 $67.40 1/2" Compression Side 1/2" Male 30 N-8 $65.30 NDC-8 $72.70 NG-8 $67.40 5/8” Compression Top 1/2" Female 30 N-9 $65.30 NDC-9 $72.70 NG-9 $67.40 5/8” Compression Side 1/2" Female 30 N-10 $65.30 NDC-10 $72.70 NG-10 $67.40 5/8” Compression Top 1/2" Male 30 N-11 $65.30 NDC-11 $72.70 NG-11 $67.40 5/8” Compression Side 1/2" Male 30 N-12 $65.30 NDC-12 $72.70 NG-12 $67.40 5/8” Inverted Flare Top 1/2" Female 30 N-13 $65.30 NDC-13 $72.70 NG-13 $67.40 5/8” Inverted Flare Side 1/2" Female 30 N-14 $65.30 NDC-14 $72.70 NG-14 $67.40 5/8” Inverted Flare Top 1/2" Male 30 N-15 $65.30 NDC-15 $72.70 NG-15 $67.40 5/8” Inverted Flare Side 1/2" Male 30 N-16 $65.30 NDC-16 $72.70 NG-16 $67.40 3/4" Compression Top 1/2" Female 30 N-17 $65.30 NDC-17 $72.70 NG-17 $67.40 3/4" Compression Side 1/2" Female 30 N-18 $65.30 NDC-18 $72.70 NG-18 $67.40 3/4" Compression Top 1/2" Male 30 N-19 $65.30 NDC-19 $72.70 NG-19 $67.40 3/4" Compression Side 1/2" Male 30 N-20 $65.30 NDC-20 $72.70 NG-20 $67.40 Other Available Fittings Inlet: ¼” FNPT, ¼” MNPT, 3/8” MNPT, 3/8” Compression, 1/2” Flare, ¾” MNPT, ¾” FNPT
ADD $2.00 TO LIST Outlet: 1/4” FNPT, 3/8” FNPT, 3/8” MNPT, ¾” MNPT, ¾” FNPT
Outle
led Male eads .14
RIES OPTIONS
M- Installed Muffler $6.60
P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60
NL-SERIES PILOTED DISCHARGE CHECK VALVES
NLDC Dual Control
NL Plain Stem
Inlet
NLG Hand Unloader Throttle Port
Inlet Outlet 3/4" Female 3/4” Fe3/4" Compression 3/4" Fe3/4"” Inverted Flare 3/4" Fe1” Female 3/4" Fe3/4” Female 3/4" M3/4” Compression 3/4" M3/4" Inverted Flare 3/4" M1” Female 3/4" M3/4" Female 1” Fem3/4" Compression 1” Fem3/4" Inverted Flare 1” Fem1” Female 1” Fem3/4" Female 1” Mal3/4" Compression 1” Mal3/4" Inverted Flare 1” Mal1” Female 1” Mal
SU3- Start Unloader Installed
$4.10
t
Discharge Port
Outlet PorSCFM P/N Price P/N Price P/N Price male 60 NL-1 $169.75 NLDC-1 172.35 NLG-1 176.75 male 60 NL-2 $169.75 NLDC-2 172.35 NLG-2 176.75 male 60 NL-3 $169.75 NLDC-3 172.35 NLG-3 176.75 male 60 NL-4 $169.75 NLDC-4 172.35 NLG-4 176.75 ale 60 NL-6 $169.75 NLDC-6 172.35 NLG-6 176.75 ale 60 NL-7 $169.75 NLDC-7 172.35 NLG-7 176.75 ale 60 NL-8 $169.75 NLDC-8 172.35 NLG-8 176.75 ale 60 NL-9 $169.75 NLDC-9 172.35 NLG-9 176.75 ale 60 NL-11 $169.75 NLDC-11 172.35 NLG-11 176.75 ale 60 NL-12 $169.75 NLDC-12 172.35 NLG-12 176.75 ale 60 NL-13 $169.75 NLDC-13 172.35 NLG-13 176.75 ale 60 NL-14 $169.75 NLDC-14 172.35 NLG-14 176.75 e 60 NL-16 $169.75 NLDC-16 172.35 NLG-16 176.75 e 60 NL-17 $169.75 NLDC-17 172.35 NLG-17 176.75 e 60 NL-18 $169.75 NLDC-18 172.35 NLG-18 176.75 e 60 NL-19 $169.75 NLDC-19 172.35 NLG-19 176.75
SA- Sealed Adjustment
$6.00
SS- Sealed Male Threads $1.14
NL-SERIES OPTIONS
P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60
TC-SERIES THROTTLE CONTROLS
CABLE STYLE
(TCP/TCLP) CABLE STYLE
(TCI-TCLI) AIRLINE STYLE
(TCSP)
P/N For Engines Inlet Where Used Price TCP 8HP and below 1/8” MNPT Systems w/external unloaders $13.96* TCI 8HP and below 1/8” MNPT Systems w/external unloaders $17.10* TCLP Above 8HP 1/8” MNPT Systems w/intake unloaders $26.74* TCLI Above 8HP 1/8” MNPT Systems w/intake unloaders $29.84* TCSP-H-5565-B Honda 4/5.5/6.5 HP 1/4” Compression Systems with int/ext unloaders $14.80 TCSP-H-0809-B Honda 8/9 HP 1/4" Compression Systems with int/ext unloaders $25.08 TCSP-H-1113-B Honda 11/13 HP 1/4" Compression Systems with int/ext unloaders $25.08 TCSP-R-456-B Robin EX 4.5/6 HP 1/4" Compression Systems with int/ext unloaders $15.84 TCSP-R-0811-B Robin EX 9/11 HP 1/4" Compression Systems with int/ext unloaders $23.18
0546-Vangaurd Connection
*Prices for the Bullwhip cable style throttles are based on 12” versions. For every 1” beyond 12”, add $.10 to the list price.
CABLE STYLE ACCESSORIES
3203- Honda Bushing
0139- Swivel Clamp $8.90/10
0750- Brigss/Honda C-Style Clamp $8.10/10
0817- Threaded Casing Clamp $6.60/10
$1.93
AIRLINE STYLE ACCESSORIES
Included with all Airline Style models are all the mounting hardware needed for installation.
0751-Cable Clamp w/ Locking Tab $6.60/10
$4.10/10
SAFETY VALVES
Vent
t
DISCHARGE VALVES
Part Number D D1 D2 D3 D4 DL D6-M
SRV UV & NB ASME Code Silicone Seal Max Temperature: 250°
SRH UV & NB ASME Code Stainless Steel Ball Max Temperature: 350°
Pilot Inle
P/N NPT SCFM PSI Range Price SRV187 1/8” 17-118 25-250 $5.09 SRV250 SRV250
1/4" 3/8”
31-214 31-214
25-250 25-250
$5.09 $7.00
SRV390 1/2" 66-449 25-250 $15.43 SRV530 3/4" 143-970 25-250 $34.52 SRV765 1” 304-2066 25-250 $50.39
Discharge Inlet Pilot In1/8” Male 1/8” Fem1/4" Compression 1/8” Fem1/4" Female 1/8” Fem1/4" Compression 1/8” Fem1/4" Female 1/8” Fem1/2" Female 1/8” Fem1/8" Male 1/8” Fem
D-SERIE M-Muffler aon D1 & D2$2.60
P/N NPT SCFM PSI Range Price SRH250 1/4" 51-289 50-350 $12.22 SRH375 1/2" 118-670 50-350 $21.67 SRH580 3/4" 145-1152 25-350 $51.16 SRH580 1” 145-1152 25-350 $51.16
Discharge Inlet
let Vent Size Price ale 1/4"Female $27.50 ale Direct Unported $25.90 ale Direct Unported $25.90 ale 1/4" Female $27.50 ale 1/4" Female $27.50 ale 1/2" Female $54.20 ale Direct Unported $27.50
S OPTIONS
vailable only
SMART START
Inlet
AIC • Replaces standard Inlet Filter • Reduces the time needed to achieve run amperage from
MISCELLANEOUS ITEMS
t
start up and eliminates tripped circuit breakers • Compensates for starting voltage drops and allows the use
of multiple tools on the same circuit • Improves cold weather and extension cord starting
characteristics • Integral inlet filter provides a barrier between worksite
contamination and your compressor
Outle
SCV-1: Control Line Check Valve $24.24
WV-1: Automatic Drain Valve $34.75
Tank Inlet Outlet Pilot Inlet
InletP/N Inlet Price AIC38 3/8” $21.99 AIC12 1/2" $21.99
WV-1-Special: Automatic Drain Valve with complete installation accessories $36.75*
*No discounts apply
WVS-1: Strainer with screen for use with WV-1 drain valve $15.72
REPAIR KITS
P/N Description Price RCB-RK Rebuild kit for RCB’s and RCT’s 6.63 RCL-RK Rebuild kit for RCL’s 14.05 RCL-S-RK Rebuild kit for RCL-S’s 19.67 D-RK Rebuild kit for all D series 6.15 DL-RK Rebuild kit for DL’s 13.78 B-RK Rebuild kit for B series 15.90 B-M-RK Muffler Kit for B series 2.37 BL-RK Rebuild kit for BL series 37.48 N-RK Rebuild kit for all N series 29.14 NL-RK Rebuild kit for all NL series 45.79 OM-AM-RK Rebuild for Dewalt Panel Line $14.29 OM-8PREG-RK Rebuild for Dewalt Panel Line $20.82 OM-8PS-RK Rebuild for Dewalt Panel Line $11.66 OM-8PDC-RK Rebuild for Dewalt Panel Line $10.70 OM-8PCS-RK Rebuild for Dewalt Panel Line $10.64
Conrader Controls Compressors
749 East 18th Street P.O. Box 924
Erie, PA 16512-0924 PH: 814-898-2727 FX: 814-898-3512
www.conrader.com [email protected]
TERMS, CONDITIONS & WARRANTY PRICES This price list supersedes all previous offerings. Prices are subject to change without notice. Invoices will reflect prices at the time of shipment. TAXES Prices do no include any federal, state or local taxes or other governmental charges. Any taxes or governmental charges, which R. CONRADER CO. may be required to pay or collect, will be invoiced to the purchaser. TERMS OF PAYMENT Terms shall be net 30 days, including shipments of partial orders. A 1¼” per month service charge will be added to the invoice amount on all past due accounts. FREIGHT All shipments are F.O.B. Erie, PA unless otherwise stated. Delivery of material to a common carrier shall be considered to be delivery to purchaser. CLAIMS FOR LOSS OF OR DAMAGE TO MATERIAL IN TRANSIT SHALL BE FILED BY THE PURCHASER DIRECTLY WITH THE CARRIER. DELIVERIES All scheduled shipments are determined by the best judgment of R. Conrader Co. Schedules will be adhered to with the best efforts of R. Conrader Co., but are not guaranteed. R. Conrader Co. will not be responsible for delays in delivery or failure to deliver due to causes beyond its control, including without limitations, acts of God, acts of purchaser, fire, flood, accidents, riots, strikes, transportation delays, labor or material shortages or any other causes beyond its control. RETURNS No material is to be returned without our written permission. A minimum inspection and handling charge of 20%, plus freight both ways will be assessed on approved returned goods. Obsolete material and material made on special orders are not returnable. CANCELLATION Orders for special merchandise, modifications of regular merchandise or abnormal quantities of regular merchandise are not subject to cancellation or change in specifications without our written consent and upon terms that will indemnify R. Conrader Co. against consequential loss. MINIMUM CHARGE ORDERS FOR VALVES AND FITTINGS TOTALING LESS THEN $25.00 NET WILL BE BILLED AT A MINIMUM CHARGE OF $25.00. DESIGN Design may be changed without prior notice. WARRANTY All products are guaranteed for one year from date of shipment against manufacturing defects in material and workmanship, provided that in each case the product is properly installed and is used in the service for which the seller recommends. Material claimed to be defective which is returned to our factory within one year after writer prior written approval by R. Conrader Co., transportation prepaid, will be repaired or replaced at the discretion of R. Conrader Co., provided that after inspection the product is found to be defective. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INLCUDING THOSE OF MERCAHNTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.