2012 middle east training schedule

7/31/2019 2012 Middle East Training Schedule

1/28

Training CenterManitowoc

ME-Training Center

Dubai, United Arab Emirates

Training Courses 2012


2/28

Middle East Training Center

Dubai

2

METC TRAINING COURSES IN 2012

Quality training to improve your business, to share our know-how, to promote animproved knowledge in technology and safety

Following this guideline, our training achieves a greater appreciation of operatingsystems, functions, components, maintenance and repair of all products within theManitowoc Crane group brands ; Potain, Grove, Manitowoc ; from newcomer toadvanced phase.

On-site, Manitowoc Crane Care is the innovative leader in advanced crane industrytraining.

This brochure is a guideline of METC training in All Terrain cranes (GMK) and GroveRough Terrain, as well as Truck Mounted.

In the following list please find an overview of our training programs.

If you can not find the training courses or program you need, please do not hesitate tocontact us, we are always pleased to meet any special requirements that you mayhave.


3/28

Contact at Manitowoc Crane Care Training Center


Dubai

The Middle East Training Center

3

Contact: Contact:

Trainer CoordinatorJaco van Veen Firoz KavungalE-Mail:[email protected] E-Mail:[email protected]

Phone:++971 (0)4 8862677FAX:++971 (0)4 8862678/79


4/28

COST: Refer to schedule

So as to avoid any misunderstandings, please inform alltrainees that Hotel room and meals are extra expenses, i.e.telephone, bar, weekend trips, Taxi etc., are not included andmust be paid for by the trainee.

TRAINEES JOURNEY: Please inform the Training Center of the trainees travelarrangements. If they are flying to Dubai, we can assist withhotel bookings, transportation, visa application etc.

REGISTRATION: You will find enclosed registration purchase order" formswhich must be filled in and returned to the Training Centerfor confirmation.Trainees must be over 18 years old and must be declared fitto work at heights.MANITOWOC denies responsibility for accidents and/orillnesses that might occur during the training courses. Wetherefore request, that you cover your trainees against anykind of risks and provide them with the necessary insurancecertificates and forms.

CLOTHING: Most of our training programs involve numerous practicalexercises outside. Please let the trainees know that theyshould therefore bring suitable shoes and clothing. We willlend gloves, safety glasses and helmets to the trainees.For the practical parts of the training: working clothes,gloves and steel-capped shoes are needed.

CANCELLATION: In case of cancellation, please inform the training Centerimmediately in order to avoid extra charges.

TRAINING ARRANGEMENTS


Dubai

LAPTOP PC: For training courses, where a laptop is required, the PC must

have the following specifications:- Intel based system with Windows XP or Windows 7 - minimum 2MB RAM- 250MB free hard disc memory- Serial (RS232) interface or USB to serial converter- Local administration rights

4


5/28

CRANE INTRODUCTION

COURSE # COURSE

METC-012 Crane Systems Theory

METC-010 Crane Technology & Operation

5 5


6/28


7/28


METC-010CRANE TECHNOLOGY AND OPERATION

7

Prerequisites The trainees must be over 18 years old

The trainees have to bring safetyshoes and working clothes

x

x

Training duration 5 days

From Sunday 08.00 amto Thursday 12.30 pm(training notification)

Training capacity 6 people

Dates 22.01.2012 26.01.2012

13.05.2012 17.05.2012

29.07.2012 02.08.2012

14.10.2012 18.10.2012

Cost Training cost $ 1,000.00

AIM OF TRAINING COURSE

This program assumes no basic service andoperational knowledge of Grove RoughTerrain, Truck Mounted and All Terrain cranesystems. We start the course with an in-depthreview of crane terminology and technologiesso the students can relate to a cranes individual components and systems. Programscovering Grove RT load charts are used toexpose the students to how load charts areconstructed and how to properly read andinterpret them. After completion of thedomestic built cranes, the study will moveforward into the GMK product line, here thestudents will be exposed to the GMK style loadcharts. Exercises will be conducted in class toassure a full grasp of both product types.

PROGRAM

Safety Devices, Load capacity charts,Outrigger loads, Wind loading, OperatorManuals, Crane terminology & symbols, PATand EKS/RCI appreciation, swing-away-lattice,power tilt jib, luffing jib, Mega wing lift

TRAINING METHODS

Detailed theory of operation,Use of specific documents

MATERIALS AND CLASSROOMS USED

Training roomTechnical documents

VALIDATION OF KNOWLEDGE

Final test at the end of the training coursePresentation of certificate


8/28


NOTES


8


9/28


10/28


GROVE RT Intro



Crane Technology and Operation ANDCrane System Theory.

Laptop

Training duration 1 Week From Sunday 08.00 am

to Thursday 12.30 pm(training notification)


Dates

11.03.2012 15.03.2012 27.05.2012 31.05.2012

12.08.2012 16.08.2012

28.10.2012 01.11.2012



This course is designed as an introduction to thetechnology of Grove RT cranes. The student willgain an appreciation of applied technologiescovering component identity and function of carrier & superstructure

PROGRAM

Advanced understanding of the Grove RThydraulic and electrical schematics and their usein troubleshooting. Building and testing of advanced hydraulic and electric circuits on testbench. Introduction to Grove RT crane softwareand application.

TRAINING METHODS

Lectures, practical exercises (measurements,adjustments, and inspections) and use of test

benches.


Training roomTechnical documentsHydraulic & Electrical test benches.


Final test at the end of the training coursePresentation of certificate.

METC-014

10


11/28


GROVE RT 1



Grove RT Intro

Laptop

Training duration 1 Week



Dates 25.03.2012 29.03.2012

10.06.2012 14.06.2012

26.08.2012 30.08.2012

11.11.2012 15.11.2012



Identify superstructure and carrier hydraulic & electrical components and explain their basicfunction. Identification of hydraulic & electricschematic symbols. Read and understandhydraulic and electrical schematics. Troubleshoot possible system problems utilizingschematics. Conduct basic test procedures.

PROGRAM

This program assumes basic operationalknowledge of Grove Cranes. We start the coursewith a basic review of Hydraulic Theory,Principle and Hydraulic Symbols. The attendeeswill gain an understanding of the hydrauliccomponents and systems through the study of the hydraulic schematics. This will give studentsa working knowledge of a fully functioning Grovecrane and the foundation to learn proper

troubleshooting techniques and hydraulic testprocedures. Part 2 will involve basic ElectricalTheory and Principles along with electricalsymbols. Schematics will then be covered toassure students understand the function of Grove Crane electrical systems and are a basisfor troubleshooting and repairs. Hands-onsessions are conducted to reinforce classroomstudies. Hydraulic/Electrical test benches allowtechnicians to apply classroom theory topractical hydraulics and electrical tasks.

TRAINING METHODS

Lectures, practical exercises (measurements,adjustments, and inspections) and use of testbenches.


Training roomTechnical documentsHydraulic & Electrical test benches.


Final test at the end of the training coursePresentation of certificate.

METC-110

11


12/28


GROVE RT 2



RT 1

Laptop




Dates 08.04.2012 12.04.2012

22.06.2012 28.06.2012 09.09.2012 13.09.2012

25.11.2012 29.11.2012



Identify hydraulic & electrical components usedon the RT cranes and explain their basicfunction. Read and understand hydraulic andelectrical schematics. Make system checks usingrecommended test procedures and be able tounderstand the indicated readings. Troubleshootsystem problems utilizing schematics andservice software.

PROGRAM

This program assumes basic knowledge of operation, and hydraulic & electrical systems ascovered in the previous courses. The coursestarts with a review of the basic principle of hydraulic & electrical systems. This programcovers current technology with Grove Cranehydraulic & electrical systems and components.Students will gain an understanding of

components and systems through the intensestudy of system schematics. This gives thestudents a working knowledge of these systemsand the foundation for proper troubleshootingtechniques and test procedures. HED ServiceSoftware will be loaded onto students laptops.The class is divided into groups and assigned toa machine specific simulator to review thehydraulic and electrical system components onthat model. Students are required to conducttest procedures to troubleshoot and repairproblems induced on their simulator.

TRAINING METHODS

Lectures and practical exercises (measurements,adjustments, and inspections)Trouble-shooting practical exercises


Training roomTechnical documentsHydraulic and electrical test benches andmachine specific simulators.



METC-210

12


13/28


PAT 1



RT 2

Laptop




Dates 22.04.2012 26.04.2012

08.07.2012 12.07.2012

23.09.2012 27.09.2012

09.12.2012 13.12.2012



Have the basic understanding of LMI systemsand circuits. Have the basic understanding of how to diagnosis problems through error codesand troubleshooting procedures. Have theunderstanding of how to properly check thesystems voltage supplies and circuit measuringpoints. Be able to properly replace main boards,pressure transducers and perform basic system

adjustments. Receive the PAT LMI Error codeviewers.

PROGRAM

The course takes the students into the innerworkings of the LMI systems throughexplanations of the overall system schematics.In-depth sessions covering the individualcircuits, digital inputs, measuring channels, andbasic adjustments will give the student the

foundation necessary for the troubleshootingphase. The course will cover how to properlytroubleshoot system problems through the useof errors codes, flow charts and procedures.Students will learn how to remove and reinstallmain boards, pressure transducers, and how toproperly readjust the voltage settings. Systeminduced problems will provide students theopportunity to utilize the troubleshootingmanuals and procedures learned to diagnosisand repair the problems.

TRAINING METHODS

Lectures and practical exercises (measurements,adjustments, and inspections)Trouble-shooting practical exercises


Training roomTechnical documentsPAT specific simulators.



METC-310

13


14/28


15/28


GMK CRANESCOURSE # COURSE

METC-016 GMK Intro

METC-120 GMK 1

METC-220 GMK 2

METC-320 ECOS/EKS 1

METC-420 ECOS/EKS 2

15 15 15


16/28


GMK Intro



Crane Technology and Operation ANDCrane System Theory.

Laptop

Training duration 5 days From Sunday 8:00 am

to Thursday 12.30 pm(training notification)


Dates

04.03.2012 08.03.2012 20.05.2012 24.05.2012

05.08.2012 09.08.2012

21.10.2012 25.10.2012



This course is designed as an introduction tothe technology of GMK cranes. The student willgain an appreciation of applied technologiescovering component identity and function of carrier & superstructure

PROGRAM

Overview of function groups, components,steering, engines and transmissions,appreciation of incorporated hydraulics,electrical and pneumatic systems, use andnavigation of circuit diagrams. Introduction toELAN & SEE electric schematics.

TRAINING METHODS

First steps in electrics, hydraulics andpneumatics schematics

Lectures and practical exercises on simulator


Training roomTechnical documentsHydraulic and electrical test benches



METC-016

16


17/28


GMK 1



GMK Intro

Laptop


From Sunday 8:00 amto Thursday 12.30 pm(training notification)


Dates 18.03.2012 22.03.2012

03.06.2012 07.06.2012 19.08.2012 23.08.2012

04.11.2012 08.11.2012



This course is designed to further developskills in maintenance and troubleshooting of GMK cranes. The student will gain furtherappreciation of applied technologies coveringcomponent identity and function of carrier & superstructure

PROGRAM

Advanced understanding of the GMK hydraulicand electrical schematics and their use introubleshooting. Building and testing of advanced hydraulic and electric circuits ontestbench. Introduction to GMK crane softwareand application.

TRAINING METHODS

Lectures and practical exercises on simulatorInteractive presentations and use of testbenches.





METC-120

17


18/28


GMK 2



GMK 1

Laptop


From Sunday 8:00 amto Thursday 12.30 pm(training notification)


Dates 01.04.2012 05.04.2012

17.06.2012 21.06.2012 02.09.2012 06.09.2012

18.11.2012 22.11.2012



This course is designed to fully develop skills inmaintenance, repair and troubleshooting of GMK cranes and fully develop supportingknowledge.

PROGRAM

Complete understanding of Grove GMKschematics and their use in troubleshooting.Building complex combined hydraulic andelectrical circuits on test bench. Use of GMKsoftware and applications in troubleshootingfaults.

TRAINING METHODS

Lectures and practical exercises on simulatorInteractive presentations and use of testbenches.





METC-220

18


19/28


ECOS /EKS 1



GMK 1

Laptop




Dates 15.04.2012 19.04.2012

01.07.2012 05.07.2012

16.09.2012 20.09.2012

02.12.2012 06.12.2012



Introduction to the ECOS and the EKS/RCL 4and EKS/RCL 5 principles and technology. Thecourse provides a detailed theory of theoperating and LMI systems.

PROGRAM

Understanding the GMK operating and LMIprincipals. Introduction to ECOS 1 & 2,EKS 4, 5 and 5 Light systems.

TRAINING METHODS

Lectures and practical exercises,Detailed theory of operationTraining bench


Training roomTechnical documentsSimulator



METC-320

19


20/28


ECOS /EKS 2



ECOS/EKS 1

Laptop




Dates 29.04.2012 03.05.2012

15.07.2012 19.07.2012

30.09.2012 04.10.2012

16.12.2012 20.12.2012



Advanced knowledge of ECOS and theEKS/RCL 4 and EKS/RCL 5 principles andtechnology. The course provides a detailedtheory of the operating and LMI systems.

PROGRAM

Programming and using the GMK operatingand LMI systems. Fully understanding theECOS/EKS schematics and their use introubleshooting.

TRAINING METHODS

Lectures and practical exercises,Detailed theory of operationTraining bench


Training roomTechnical documentsSimulator



METC-420

20


21/28


MASTER STAGE

21 21 21

COURSE # COURSE

METC-510 Grove RT 3 (Master)

METC-520 GMK 3 (Master)


22/28




Successfully passed Grove RT 2

Successfully passed PAT 1

Laptop


From Monday 10.00 amto Friday 12.30 pm(training notification)


Dates This course is by invitation only


METC-510Grove RT 3 (Master)


To fully develop skills in troubleshooting of Grove RT cranes. Using software and fullydevelop supporting knowledge.

PROGRAM

Advanced understanding of Grove RTschematics and their use in troubleshooting.

Building and testing complex combinedhydraulic and electrical circuits on test bench.Use of Grove RT crane software andapplications in troubleshooting faults. Reviewof advanced troubleshooting techniques.Provision of software, cable set, etc.

TRAINING METHODS

Pre testDetailed theory

Training CDPractical tasks on the crane


Training roomTechnical documentsGrove RT CraneSimulator



22


23/28




Successfully passed ECOS/EKS 1&2

Successfully passed GMK 1&2

Laptop




Dates This course is by invitation only


METC-520GMK 3 (Master)


To fully develop skills in troubleshooting of GMK cranes. Using software and fully developsupporting knowledge.

PROGRAM

Advanced understanding of GMK schematics

and their use in troubleshooting. Building andtesting complex combined hydraulic andelectrical circuits on test bench. Use of GMKcrane software and applications introubleshooting faults. Review of advancedtroubleshooting techniques. Provision of software, switchbox, dongle set incl.authorization and agreement.

TRAINING METHODS

Pre testDetailed theoryTraining CDPractical tasks on the crane


Training roomTechnical documentsGMK craneSimulator



23


24/28


NOTES


24


25/28

REGISTRATION PURCHASE ORDER to return to :MANITOWOC CRANE GROUP MIDDLE EAST TRAINING CENTER Jebel Ali Free Zone Dubai-UAE

E-mail: [email protected] / FAX: +971 (0)4 8862678/79


RegistrationDate of the registration:

Course Name/#

Course Date

Course Location

Costs

Company

Contact

Address

Contact Phone

Contact E-mail

Invoice recipient

Purchase Number

Participant 1

2

3

4

56

Fllight details: Arrival Flight number

Remark:

Manitowoc CraneCare Middle East Training Center

Firoz Kavungal

Phone: +971 (0)4 8862677 / Fax: +971 (0)4 8862678/79

Hotel booking

Transfer needed?

Dubai

clothes are required.

For the practical part additional working shoes and

25


26/28



27/28

ADDRESS MAP

MANITOWOC CRANE GROUP ME FZE

TRAINING CENTER

Jebel Ali Free Zone

P.O. Box: 261734

Dubai, United Arab Emirates

Phone: +971 (0)4 886 2677

Fax: +971 (0)4 886 2678/79

E-Mail: [email protected]

GPS: 2457 12.84 N 5505 21.71 E


27


28/28

AmericasManitowoc, Wisconsin, USA Tel: +1920 684 6621Fax: +1920 683 6277

Shady Grove, Pennsylvania, USA Tel: +1717 597 8121Fax: +1717 597 4062

Europe, Middle East & Africa Ecully, FranceTel: +33 (0)4 72 18 20 20Fax: +33 (0)4 72 18 20 00

Greater Asia Pacic

SingaporeTel: +65 6264 1188Fax: +65 6862 4040

Regional ofces

AmericasBrazil

AlphavilleMexicoMonterrey ChileSantiago

Europe, Middle East& AfricaCzech RepublicNetvoriceFranceBaudemontCergy DecinesGermany LangenfeldHungary BudapestItaly LainateNetherlandsBredaPoland

Warsaw PortugalBaltar

RussiaMoscow U.A.E.DubaiU.K.Buckingham

ChinaBeijingChengduGuangzhouXian

Greater Asia - Pacic Australia AdelaideBrisbane

MelbourneSydney IndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati City Singapore

Factories Brazil

AlphavilleChinaTaiAnZhangjiagang

France CharlieuMoulins

Germany WilhelmshavenIndia PuneItaly Niella TanaroPortugalBaltarFnzeres

SlovakiaSarisUSA ManitowocPort WashingtonShady Grove

Regional headquarters

This document is non-contractual. Constantimprovement and engineering progress make itnecessary that we reserve the right to makespecication , equipment, and price changes

without notice. Illustrations shown may includeoptional equipment and accessories and may notinclude all standard equipment.

ChinaShanghai, ChinaTel: +86 21 6457 0066Fax: +86 21 6457 4955

2012 middle east training schedule

Documents