2012 professional services - chapman consulting, … cci sales brochure.pdf · 2012 professional...
TRANSCRIPT
Phone: (337) 896-1721
Fax: (337) 896-1731
E-mail: [email protected]
338 Thoroughbred Drive
Lafayette, LA 70507
PO Box 428
Carencro, LA 70520
Chapman Consulting, Inc. (CCI)
Established in 1989, Chapman Consulting, Inc. (CCI) is a service oriented consulting firm
specializing in facility maintenance and modifications in the Gulf of Mexico Oil & Gas Industry.
2012 PROFESSIONAL SERVICES2012 PROFESSIONAL SERVICES2012 PROFESSIONAL SERVICES
PROJECT MANAGEMENT
INSPECTION
ENGINEERING
DRAFTING & DESIGN
338 Thoroughbred Drive ♦ Lafayette, LA 70507 Phone: (337) 896-1721 ♦ Fax: (337) 896-1731
Operations Support Services Provided In addition to providing typical project services for new developments, CCI provides extensive operations engineering support services to the offshore oil and gas industry. CCI is very different from most project-oriented engineering companies in that we are dedicated to providing the technical assistance that is needed to improve daily operations. We feel that there are many applications where engineering and technical management assistance to the operations staff would be extremely beneficial, but often is not available. Often, important and profitable issues are never addressed because of insufficient engineering attention. We can provide or supplement that engineering and technical assistance to your operations staff for the following areas.
Annual corrosion repairs both structurally and on process equipment Compression (optimization, maintenance issues and new installation) Gas Dehydration Oil Treating Water Treating and Overboard Water Quality Measurement: Equipment and Measurement Audits Cranes (maintenance, removal/replacement & heavy lift planning) Heavy Lifting using modular cranes, lift boats and lift barges. Piping, Controls and Instrumentation Revisions Heaters and Coolers Quarters Refurbishment Prefab “Bolt-Up” Flowline Fabrication and Installation. Equipment Additions and Modifications with Emphasis on Minimum Downtime Installation. Hot Work Procedures and Coordination with Detailed Safety Planning Maintenance Turnarounds with Minimum Shut-in Time Vessel Internal Inspection and Repairs Control Sizing, Selection and Procurement Field Optimization including evaluations of pressures drops and flow capacities. Corrosion Control including erosion/corrosion surveys Diving Operations Including Platform Structural Inspections. Pipelines (Emergency Repairs, Hydraulic Calculations, Modifications & New Installations) Preventative Maintenance Program for Rotating Equipment Well Conductor Additions SEMP Implementation, Reviews and Hazard Analysis Regulatory Issues Including Facilities and Pipeline Permitting Due Diligence evaluations for Property Acquisition. Site Clearance Coordination for Rig and Lift boat Access to Platforms Platform Abandonment
We inspect and evaluate existing equipment and systems for best operations and maintenance needs. Our goal is to work closely with the operations personnel to resolve most operating problems at the field level. We also work with reservoir engineers and project engineers in planning and implementing facilities, structural and pipeline changes. Evaluation of options cost estimating; scheduling and implementation of construction for system changes are available in this application. CCI is here to fill the gap that exists between normal service company support and major project engineering activities. Let CCI be a part of your operations team to maximize throughput and minimize your expenses. Sincerely, Randy Chapman, P.E.
FIELD EXPERIENCE TRANSLATES INTO COST
SAVINGS FOR YOUR COMPANY
Our Project Management, Engineering and Design staff are required to have the
field experience it takes to incorporate intelligent and “real world” planning into
each project. Too often, there is a disconnect between the planning phase onshore
and the execution of a project in the field. We pride ourselves in having hands-on
experience with the work we are managing. In addition to making the execu-
tion an overall smoother process, there is an element of safety that is
inherent in this process that should not be overlooked.
SERVICES AVAILABLE
PROJECT MANAGEMENT
Our Project Managers are experienced and
effectively communicate the details of the job
to management, keeping you informed at all
times.
INSPECTION
CCI can provide customer representation on
your projects or conduct detailed inspections
for design, budgetary numbers or a host of
other applications.
ENGINEERING
CCI provides facility, project specific, or
structural engineering capabilities to fit your
need. Randy Chapman, Principal Engineer,
brings 30+ years experience to your project.
DRAFTING & DESIGN
Our drafting and design group is well versed in
regulatory drafting requirements (flow sheets,
SAFE charts, equipment layouts, etc.) as well as
the implementation of 3D and isometric draft-
ing when the project calls for it.
338 Thoroughbred Drive
Lafayette, LA 70507
(337) 896-1721 ph
(337) 896-1731 fax
www.chapmanconsulting.net
SERVICE WITH A SMILE?
Chapman Consulting, Inc. is a small consulting firm, employing approximately 25
people. While a lot of companies boast customer service, we feel that we can back
up these claims—and our customers agree. On call 24/7, we can and will handle
your project needs in a timely fashion. We will treat you and your company with the
same dignity and respect throughout our working relationship as the day we per-
formed the first job for you. We know if given the opportunity, the work is ours to
lose. To support that claim, CCI has never lost a customer based on poor perform-
ance since our founding in 1989.
PLATFORM P&A and REMOVALS
• Plan & manage logistics for P&A contractors.
• Decommission facilities and remove Compressors.
• Decommission and abandon pipelines (DOI & DOT).
• Plan & manage barge removal and transportation of structures.
• Plan & manage site clearance.
• Develop sales literature for resale of structures if needed.
• Recent P&A’s completed on: 4 Piles and larger, tripods, Caissons with references available upon request.
• Cost estimates on 150+ facilities (pipelines & structural P&A’s).
• Accurate SEMS and cost
tracking paperwork throughout the project.
PIPELINE REPAIRS
• Planned & managed replacement of 16” riser tube-turn.
• Planned & managed
replacement of 10” riser tube-turn.
• Planned & managed leak
repair on 10” pipeline via split sleeve clamp installation.
• Planned & managed repair of
riser leak located within J-tube at -285’ water depth.
• Partial abandonment of 60k+ ft
16” DOT pipeline; Returned ~43k ft back to service.
• Addressed more than one stuck
pig and returned pipelines back to service
• Numerous pipeline flushings,
picklings & abandonments of DOI and DOT lines.
RECENT PROJECTS • Planned & managed removal of 3
compressors (heavy lifts) and replaced with 2 smaller, more economical compressors.
• Planned & managed installation of compressor, blow case, and water skimmer.
• Planned & managed compressor installation simultaneously with upgrade of existing compressor.
• Planned & managed replacement of production separator.
• Planned & managed complete rebuild of storm damaged LACT unit. Planned & managed a new LACT unit as well as major upgrades on another, all 3 to Shell specs.
• Numerous well flow line hookups.
• Planned & managed compressor cooler repairs.
RECENT PROJECTS • Production Upgrades at
one facility: added float cell, debottlenecked system by upgrading piping to separators, refurbished OOS separator, added crew quarters, refurbished compressor cooler, added compressor, upgraded a crane, added several deck extensions and associated egress.
• Aggressive pipeline abandonment campaign during 2011 for several customers.
• Numerous corrosion
maintenance programs on offshore & onshore facilities.
• Numerous platform removals during abandonment activities.
• Provided engineering
support to SEMS process for several customers.
RECENT STRUCTURAL REPAIRS
• Repaired collapsed jacket diagonal at -50’ Water Depth.
• Replaced W42 deck girder beams on 2 platforms after significant storm damage.
OFFSHORE PLATFORM DESIGN & ANALYSIS
• Performed structural analysis for re-use of Tripod structure at a new deeper location with additional conductors.
• Designed free-standing caisson well protector for 40’ of water depth.
• Designed braced caisson well protector structure for 164’ water depth.
• Coordinated installation of additional conductor guides.
3D MODELING • Use of 3D modeling is used by CCI
for design of new structures, as shown to the right, per latest API RP 2A guidelines. Especially when used in piping design, 3D modeling can assist in minimizing costly field delays by identifying obstructions or other issues early in the design process.
• 3D modeling was utilized, as
shown in the center picture, in preparation of navigating a ROV on a downed structure. This model was used to help develop a plan for the inspection and aided in the identification process of damaged members, conductors, risers, etc. during the inspection.
• Designed and fabricated manifold skid system to complex specifications with weight and size restrictions.
DESIGN WORK
338 Thoroughbred Drive ♦ Lafayette, LA 70507 Phone: (337) 896-1721 ♦ Fax: (337) 896-1731
REFERENCES
338ThoroughbredDrive♦Lafayette,LA70507Phone:(337)896‐1721♦Fax:(337)896‐1731
Black Elk Energy
11451 Katy Freeway, Ste 500 Houston, TX 77079 Ph: (337) 257-9422 Mr. Darren LaRive, Production Superintendent
Pisces Energy, LLC 3850 North Causeway Blvd, Ste 1770 Metairie, LA 70002 Ph: (504) 831-9008
Mr. Jon Garrett, Chief Operations Officer - Drilling
Blue Dolphin Services 801 Travis, Suite 2100 Houston, TX 77002-5729 Ph: (713) 227-7660 Mr. Larry Turpin, Director of Pipeline Engineering & Ops
Flash Gas and Oil, Inc.
629 Village Lane South Mandeville, LA 70448 Ph: (985) 626-8758 Mr. Steve Haller, President
Sandridge Energy 757 9th Street San Leon, TX 77518 Ph: (281) 339-5301 Billy Madden, Production Superintendent
Tana Exploration 25025 I-45 North, Suite 600 The Woodlands, TX 77380 Ph: (281) 364-2206 Mr. Larry Brown, Facilities / Construction Manager
LE
AN
AN
D M
EA
N
Since 1989, Chapman Consulting,
Inc. (CCI) has been working hard
for its customers to achieve their
goals in a safe, cost effective man-
ner. Our safety record and the way
we run our own business is proof
that we lead by example and can
back up our claims.
In 2011, CCI was recognized in
Lafayette’s own 008 magazine in
their Black Gold Profile. The first
paragraph of that article reads,
“LEAN and mean. Chapman
Consulting, an offshore engineering
and project management firm, runs
its business on these words.” It goes
on further to state, “the lean and
mean’ claim isn’t just a motto; it is
supported by the firm’s daily
actions.” We take pride in our work
and would like the opportunity to
earn your trust and business.
Minority Owned Business (Female Owned)
Excellent Safety Record
Competitive Rates
Personal Service and Timely Responses
Centrally Located along the Gulf Coast in
Lafayette, LA
Chapman Consulting, Inc. (CCI)
WH
Y C
HA
PM
AN
(C
CI)
?
Project Management
Inspection
Engineering
Drafting & Design
FO
CU
S
Randy Chapman, Principal Engineer
Craig Chapman, Vice President
Jacques Dubois, Operations Manager
CO
NT
AC
T
338 Thoroughbred Drive
Lafayette, LA 70507
PO Box 428
Carencro, LA 70520
Phone: (337) 896-1721
Fax: (337) 896-1731
E-mail: [email protected]