2014 granite city tool fabrication catalog

CNC TOOLING 3-16CNC Diamut Profile Index 4CNC Core Bits 13CNC Finger Bits 14-15HAND STONE SAWS 17-18Rail Systems 17GRINDERS & POLISHERS 19-24Air Tools 21-22HAND ROUTERS / EDGING MACHINES 25-26ADAPTORS & ATTACHMENTS 27-28Flush Mount & Quad 27ROUTERS & PROFILERS 29-32Diamut Portable Bits 29Apexx Bits 30Rival Profilers 32GRINDING & CUP WHEELS 33-35Tornado Wheels 33Diamax Cluster Wheels 35Rival Vacuum Brazed Wheels 35DRUM & OSCILLATING WHEELS 36-37Zero Tolerance Wheels 36Oscillating Drum Wheels 37DIAMOND BLADES 38-48Bridge Saw Blades 38-41Turbo Blades 42-45Specialty Blades 44-48DIAMOND CORE BITS 49-51Blind Hole Core Bits 50DIAMOND POLISHING PADS / BUFFING 52-62Rival Wet Pads 52Super Sport Wet Pads 53Dry Pads 54-553 to 5 Step Pads 55-57Quartz & Engineered Pads 57Backer Heads 60-61Buffing Supplies 62SILICON CARBIDE 63-64MACHINE TOOLING 65-74C-Frame/Pro-Edge Wheels 65Grinding & Shaping Wheels 66Flat & Bullnose Wheels 67-73Brushes 74

ADHESIVES & EPOXIES 75-84Rival Polyesters 75-77Hybrids 78Acrylics 79Rodding Glue 79Rival Epoxies 80Rival Silicone 83STONE REPAIR 85-87Stains, Chips, Fill, & Repair Kits 85-87STONE CARE 88-93Enhancers & Darkeners 88-89Sealers 90-91Cleaners 92Stone Polishes & Wax 93SINK INSTALLATION TOOLS 94-98T-31 Machines 94Bolts, Clips, Anchors, Brackets, & Mounts 95-98LIFTING & HANDLING 99-115Omni Cubed Products 100-104Seam Setting 102-103Clamps 105-107Booms 106Aardwolf Lifters 107Vacuum Lifters 108Bundle & Slab Racks 114INSTALL SUPPLIES 116-118Boots, & Gloves 116SHOP SUPPLIES & SAFETY 119-125Aprons 119Safety Glasses 123Masks & Earplugs 124Dust Control 125TEMPLATING 126STONE ETCHING 127-129FLOOR POLISHING 130-131AIR COMPRESSORS 132WATER FILTRATION 133-136LARGE STONE SAWS & MACHINES 137-139Mitre Saw, Fab King, & Stone Cobbler 137Manta & Imer Saws 138-139

www.granitecitytool.comPhone: 800-328-7094 Fax: 866-522-1817

Fabrication Catalog 2014 Index on Page 140

TABLE OF CONTENTS

Follow Us:

OrderOnline!

www.granitecitytool.com

Clear Silicone

Granite Grabbers

Undermount Brackets

Rival Pads

Paint Pens

Dishwasher Bracket

Sink Rodding

Pine Shims

Rival KG

Tool LineNEW

Turbo Blade Core Bit Finger Bit

Pg. 15Pg. 49Pg. 42

PG. 83

PG. 98

PG. 97

PG. 52

PG. 120

PG. 98

PG. 97

PG. 117

PG. 75

- A solid steel core milled to exact specifications provide you with perfectly balance tools insuring maximum life and a quality of polish unmatched in the industry. This is due to our specially formulated matrix containing the finest diamonds and metal powders available.

- Our metal tools have proven on various types of CNC machines to provide the best life in the industry when ran at proper setting and specifications. Our experienced team of salesmen and technicians will work with you to assure your tools provide your shop with maximum life.

- Our Flash polishing wheels when combined with our metal tooling provide absolutely the best finished product shine in the industry. They are easily set up and last longer than any wheels on the market.

Pos. 1Segmented

Pos. 2-4Sintered

3

CNCCNC TOOLING

CNC TOOLING - DIAMUT

Maximum Speed Production

Higher performance bond. More coolant slots. New calibrating system for higher reliability. Card with tool measurement provided. High precision tool balancing executed with high-precision machinery.

AdvAntAges

Exclusive Distributor!

4Profile IndexCNC

CNC

TOOL

ING

- DIA

MUT

PRO

FILES

FULL CNCCATALOG AVAILABLE

CALL TODAY - 800-328-7094

*Facility in the USA **2-3 week turnaround **Extend your tool life *

*Lower your overall CNC tooling costs *

CNC Redressing Facility Now Open!CNC Redressing Facility Now Open!

5Production ParametersCNC TOOLING - PRODUCTION PARAM

ETERS

Pos. RPM Feed Removal1 5,550 1,500-2,000mm/min 60-80/min .3mm-.4mm .012-.0162 6,000 3,000-4,000mm/min 120-160/min .2mm-.3mm .008-.0123 6,000 3,000-4,000mm/min 120-160/min .1mm-.2mm .004-.0084 5,500 1,500-2,000mm/min 60-80/min .1mm .004

Pos. RPM Feed Removal1 6,000 1,500-2,000mm/min 60-80/min .3mm-.4mm .012-.0162 6,500 2,000-3,000mm/min 80-120/min .2mm-.3mm .008-.0123 6,500 2,000-3,000mm/min 80-120/min .1mm-.2mm .004-.0084 6,000 1,500-2,000mm/min 60-80/min .1mm .004

Diamond Tools -- 120mm OD


Pos. RPM Feed Removal1 6,000 750-1,000mm/min 30-40/min .3mm-.4mm .012-.0162 6,500 750-1,200mm/min 30-50/min .2mm-.3mm .008-.0123 6,500 750-1,200mm/min 30-50/min .1mm-.2mm .004-.0084 6,000 750-1,000mm/min 30-40/min .1mm .004


Pos. RPM Feed Removal1 6,000 750mm/min 30/min .3mm-.4mm .012-.0162 6,500 750mm/min 30/min .2mm-.3mm .008-.0123 6,500 750mm/min 30/min .1mm-.2mm .004-.0084 6,000 750mm/min 30/min .1mm .004


Pos. Grit RPM Feed5 800 2,750 1,000-1,500mm/min 40-60/min6 1500 2,750 1,000-1,500mm/min 40-60/min7 3000 2,750 1,000-1,500mm/min 40-60/min

Flash Resin Polish -- 120, 80, 40, 20mm

Size RPM Feed35mm 2,200 50-75mm/min 2-3/min

Thin Wall Core Bits

RPM Feed Removal5,550 2,000mm/min 80/min 3mm .125

Power Edge Super Z Wheels

Pos. RPM Feed0 5,550 1,000-2,000mm/min 40-80/min

Segmented Corner Breaker(45 or Double 45)

Blind Hole BitsSize RPM Feed6mm 7,000 50-75mm/min 2-3/min8mm 7,000 50-75mm/min 2-3/min

10mm 6,500 50-75mm/min 2-3/min12mm 6,000 50-75mm/min 2-3/min14mm 6,000 50-75mm/min 2-3/min19mm 5,000 50-75mm/min 2-3/min

Diamut Stubbing Wheels

Size RPM Feed56mm 6,000 1500mm/min 60/min




RPM Feed6,000 500mm/min 20/min

Fluting Tools

RPM Feed5,500 300-400mm/min 12-16/min

Yellow Twist Finger Bit

RPM Feed4,800 300mm/min 12/min

Green Standard Finger Bit

RPM Feed6,000-7,000 350-500mm/min 14-20/min

Electroplated Finger Bit

NOTE: Production parameters vary based on spindle power and material.


Red High Speed Finger Bit


Blue Universal Finger Bit

6Production ParametersCN

C TO

OLIN

G - P

RODU

CTIO

N PA

RAM

ETER

S

Brazed & Plated DrumsSize RPM Feed Removal

1 7,000 760-1,500mm/min 30-60/min .0302 6,000 760-1,500mm/min 30-60/min .0303 5,500 760-1,500mm/min 30-60/min .030

T-31 CuttersSize RPM Feed3/16 7,000 50-75mm/min 2-3/min1/4 7,000 50-75mm/min 2-3/min3/8 7,000 50-75mm/min 2-3/min

Leatherhead Leatherhead Mini

Starting PointRPM Feed1,500 1,200-1,500mm/min 50-60/min

RPM Feed2,500 10,000mm/min 400/min

RPM Feed

5,500 250-300mm/min 10-12/min

5,500-6,500 350-450mm/min 14-18/min

Yellow Jacket Finger Bit


Super Cyclone Finger BitZenesis Finger Bit


Rival Gold Finger Bit


Black Widow Finger BitRPM Feed

5,500-6,000 375-500mm/min 15-20/min

Orange Krush Finger Bit


Cyclone Stubbing Wheel

RPM Feed Removal5,550 2,000mm/min 80/min 3mm .125

Super Z WheelsSize RPM Feed

35mm 2,200 50-75mm/min 2-3/min

Thin Wall Core Bits

Starting Point

Hard Stone

Soft to Medium Stone

Talk to your sales representative about polishing wheel removal/pressure usages.

800-328-7094 www.granitecitytool.com

NOTE: Production parameters vary based on spindle power and material.

3 Seg

6 Seg

RPM Feed

5,500 300-400mm/min 12-16/min

5,500 300-400mm/min 12-16/min

3 Seg = Soft to Hard Stone

6 Seg = Soft to Medium Stone


Cayenna Finger Bit

99-BLI-

Starting at:$600.00

Dressing Tool Assembly

Dressing Tool Assembly comes complete with cutter assembly, six carbideinserts, wrench, mounting adaptor, cone assembly mounting bolt and water disbursement fitting ready for mounting to customer supplied 22 mm or 35 mm Conic Tool Holder. Tool can be used to dress table surface, suction cup bearing feet, suction cup & clamp surface pads as well as various styles of fixtures. Carbide cutter uses readily available carbide insert replacements.

Please Note:Different variations of dressing tools are available. When ordering you will need to specify the bore diameter which corresponds to the toolholder that you intend to use (22 and 35mm are available), and the screw size. (10 and 12mm are common sizes). Shorter or longer body lengths are available upon request.

Cone not

included

Exclusive to GCT Takes the stress away.

Cone Clamp

Holds cone without wear on the cone slots.

Item # T/H Type Price0806-0068 ISO 40 Flange D=63 $279.95

7

CNC TOOLING - BLICK MACHINE HEADS / CNC TOOL STORAGE

Holds 48 BT, CAT V flange, NMTB for 40 taper 2 storage trays with protective lining inside Durable nylon inserts to help prevent tool damage New extra tray supports for better stability Interlocking side panel construction adds strength Heavy duty 5 x 1-1/4 casters load rated at 1000 lbs. Keep tools cleaner than open end carts Angled tray for easy, quick tool access from either side Two position adjustable tray holder Solid side panels for maximum strength & stability Heavy gauge, all steel infra-red/baked epoxy finish

0806-0531 $469.00

Tool Diameter: 5.5Tool Weight: *Approximately 4lbs.Length Overall: *2.625Adaptor Type: 35mm Conic Tool Holder

Comes with 1 each of 4 & 5 Snail Lock Adaptors

Tool Diameter: 13Tool Weight: *Approximately 16.5lbs.Length Overall: *2.625Adaptor Type: 35mm Conic Tool Holder

Use your CNC Router or *CNC Bridge Saw to leather your stone. The Leatherhead Mini and The Leatherhead adapt to any 35mm conic tool holder. The Leatherhead Mini accepts 4 and 5 snail lock brushes. The Leatherhead can also hold Frankfurt style brushes. They can be used on belt driven and electro-spindle machines. Tool holders and brushes must be purchased separately. Please contact your salesperson for available options.

Frankfurt4 S

nail Lock5 S

nail Lock

Leatherhead Mini The Leatherhead

0806-0518 $695.00

Tool Scoot CNC Tool Cart

Plate with Adaptors 0806-0517 $1,295.00

Extra 4" Snail Lock 0806-0525 $45.00Extra 5" Snail Lock 0806-0526 $55.00

Screws

10mm 0806-0475 $19.9512mm 0806-0495 $19.95

0806-0458 $29.95

Locking Flange Cap

Retention Nut

Cones are heat-treated with permanently infused surface hardness to Vickers 1880 (75+ Rockwell C) with diffusion zone (approx. Rc 60) and a Rc 28-32 core hardness.

0806

-020

9

0806

-016

2

0806

-016

6

0806

-017

0

0806

-016

9

0806

-046

0

25mm 0806-0501 $5.95 0806-0454 $5.9530mm 0806-0502 $5.95 0806-0455 $5.9535mm 0806-0503 $5.95 0806-0451 $5.9540mm 0806-0504 $5.95 0806-0453 $5.9550mm 0806-0505 $5.95 0806-0452 $5.95

Shims/Spacers0806-0078 $6.95

Ask for available profiles & availability

on all others

8

PRICING SUBJECT TO CHANGE

CNCCN

C TO

OLIN

G - D

IAM

UT E

LIMIN

ATOR

/ KR

EMIN

TOO

L HO

LDER

S

CNC Machine Tool Holders

Retention Knobs

Made of 4150 pre-hardend alloy steel.

Surface hardness will withstand the 72 hour salt spray corrosion test under ASTM B117 conditions, reducing flaking and galling.

Tapered ground: superior accuracy and no vibration.

The Eliminator is a special honing grit, slotted metal tool designed to ELIMINATE lines to produce the best polish available. These can be used as a replacement for a traditional position 4 and then followed by three Flash polish wheels or as a replacement

for position 5 Flash and followed by two Flash polish wheels.

120m

m

Shape Item #A30 R10 0801-3985A30 R10 Closed 0801-3972A30 R15 Closed 0801-3964B30 0801-3959E30 8x8 0801-3993E30 8x8 Closed 0801-3963E30 11.5x11.5 0801-3994E30 11.5x11.5 Closed 0801-3977FS30 0801-3980FZ30 0801-3979T20 R3 0801-3968T30 R3 0801-3978T30 R10 0801-3990T40 R3 0801-3970V30 R15 0801-3962

80m

m

T30 R3 0801-3988

T30 R6 0801-3989

Z20 0801-3983

Z30 0801-3991

Z40 0801-3992

Z60 0801-3975

40m

m A30 R6 0801-3961T20 R3 0801-3969

T30 R3 0801-3976

80m

m

A30 R3 0801-3986A30 R6 0801-3987A30 R6 Closed 0801-3971A30 R10 0801-3984A30 R10 Closed 0801-3966A30 R15 0801-3967A30 R15 Closed 0801-3974AR30 0801-3995AR40 0801-3996E30 8x8 0801-3973E30 8x8 Closed 0801-3965

E30 11.5x11.5 Closed 0801-3960

For 10mm (M10) For 12mm (M12)Northwood Gen. III, Park, Bavelloni, Brembana, Loffler 0806-0206 $29.95Park Oddyssey/Destiny 0806-0230 $29.95Intermac 0806-0236 $34.95Northwood Gen. II 0806-0229 $29.95Northwood Gen. I 0806-0213 $34.95

0806

-020

6

0806

-023

0

0806

-023

6

0806

-022

9

0806

-021

3

by:

Description Conn. Item # PriceBavelloni 22x39 0806-0217 $239.95Bavelloni 35x39 0806-0204 $189.95Bavelloni 1/2 Gas 0806-0216 $169.95Brembana OLD Style 35x39 0806-0167 $189.95Brembana OLD Style 1/2 Gas 0806-0168 $169.95Brembana NEW Style 22x39 0806-0459 $239.95Brembana NEW Style 35x39 0806-0169 $189.95Brembana NEW Style 1/2 Gas 0806-0170 $169.95Intermac 22x39 0806-0461 $209.95Intermac 35x39 0806-0209 $189.95Intermac 1/2 Gas 0806-0215 $169.95Loffler 35x39 0806-0220 $239.95Loffler 1/2 Gas 0806-0221 $169.95

Northwood Gen. I 35x34 0806-0222 $209.95Northwood Gen. I 35x47 0806-0223 $209.95Northwood Gen. I 1/2 Gas 0806-0224 $169.95Northwood Gen. II 35x34 0806-0225 $209.95Northwood Gen. II 35x47 0806-0226 $209.95Northwood Gen. II 1/2 Gas 0806-0227 $169.95Northwood Gen. III 22x39 0806-0462 $209.95Northwood Gen. III 35x39 0806-0491 $189.95Northwood Gen. III 35x47 0806-0164 $229.95Northwood Gen. III 1/2 Gas 0806-0166 $169.95Park OLD Style 22x39 0806-0463 $209.95Park OLD Style 35x39 0806-0163 $219.95Park OLD Style 1/2 Gas 0806-0162 $169.95Park NEW Style 22x39 0806-0460 $189.95Park NEW Style 35x39 0806-0240 $189.95Park NEW Style 1/2 Gas 0806-0450 $169.95

The AUTHORITY in Vacuum WorkholdingSquare & Rectangular Suction Cups

200x200mm0806-0035

150x150mm0806-0075

250x250mm0806-0246

120x120mm0806-0076

50x300mm0806-0104

150x240mm0806-0418

150x300mm0806-0134

75x300mm0806-0235

70x240mm0806-0153

75x200mm0806-0419

120x150mm0806-0114

100x100mm0806-0513

200x300mm0806-0103

200x400mm0806-0160

150x500mm0806-0127

250x500mm0806-0128

Shaped Suction Cups

120mm Radius0806-0423

200mm Radius0806-0421

150mm Concave0806-0034

150x240mm Concave0806-0140 Left0806-0141 Right

Round Suction Cups

150mm Round0806-0415

200mm Round0806-0405

250mm Round0806-0416

350mm Round0806-0413

All shapes available in most popular height and fitting sizes

The LARGEST selection in the World

Contact you local GCT rep for more information and pricing

Specialty Suction Cups

Swivel Cup0806-0232

Vertical Holding Cup0806-0465

Retractable Cup0806-0409

75mm Core Drill Support0806-0426

Clamps

Single Mechanical Clamp0806-0150

Small Edge Clamp 0806-0446

Large Edge Clamp 0806-0445

Strip Clamp Set(Includes Small Edge Clamp)0806-0447

Large Mechanical Clamp0806-0136

Pneumatic Mushroom Clamp - Brembana Style 0806-0408

Back Splash Clamp System0806-0119

Pneumatic Swing Clamp99-BLI-0023

Pneumatic Mushroom Clamp0806-0440

Location Devices

Vac - Stop0806-0242

Brembana Stop0806-0435

Pin - Stop26mm Diameter31mm Diameter35mm Diameter50mm DiameterCall for Info.

Edge Stop0806-0126

Flip Stop0806-0437

Manifolds

8 - Port Manifold99-BLI-0025

16 - Port Manifold99-BLI-0024

Portable Manifold99-BLI-0235

Accessories

Tubing Seals Valves / Fittings Tool Forks Dressing Tool

ELEC

TRO

PLAT

ED

1/2 gas thread andcenter waterfeed

Item #0806-0398

12


CALL FOR PRICING

CALL FOR PRICING CALL FOR PRICING

Power Edge Super Z

- HYS Technology- Use this tool for high speed stock removal, cutting notches for back splash, or scribe to a digital template up to 10 times faster than a traditional finger bit.

Calibration/Stubbing WheelsUse this tool to gauge stone to an even thickness prior to running edge details.

Heavy Duty

NEWDESIGN

Madein U.S.A.Made

in U.S.A.

Calibration Wheel Adapters

30x7mm Segments

1/2 Gas 35mm Bore

Super Z

- Top quality diamonds & specially engineered segments. - Improved design for effective use & avoiding waste of diamond.CN

C TO

OLIN

G - Z

WHE

ELS

/ DRU

MS

Pos. 3 CM

1 0801-3937

Electroplated Wheels1/2 gas thread and center waterfeed

Brazed Sink Wheel- CNC -

1/2 Gas Drum Wheel for CNC or radial arm machine. Guaranteed to outlast brazed diamond wheels. Send them in for re-plating and save money.

Size Grit Item # Price1 x 2 #50 0803-0003 $84.95 1 x 2 #100 0803-0004 $84.95 2 x 2 #50 0803-0005 $94.95 2 x 2 #100 0803-0006 $94.95

Desc. Item #92mm 0801-4005

Perfect for sink clean outs and internal radii.

Pos. 4 CM

1 0801-3938

Item #0806-0489

Pos. 3 CM Price1 0801-2682 $369.95

Size Grit Item # Price1 x 2 30/40 4303-0036 $154.951 x 2 50/60 4303-0038 $149.952 x 2 30/40 1919-0116 $299.952 x 2 50/60 1919-0118 $279.95

13

CNC TOOLING - 1/2 GAS CORE BITS / INCREMENTAL CUTTING BITS

High Quality diamond core bits.

Blue DiamondContinuous Ring Core Drills

Thin Wall Core Bits

1 2

GCT - 1/2 GasStainless Steelwith Hydro Port

4308-0135 $189.95

This mandrel measures 5 in length, gas connection, made of stainless steel, brass and is center water feed. Use our plastic sink templates as a cut-out guide for fast, precise sink cut-outs. Unique features include a hydro port behind the brass bushing to allow for cooling and prevent sediment build up. Also replaceable retention cap that allows you to use this Mandrel for years. Buy your last Mandrel First at Granite City Tool.

The Ultimate Speedy Bit Mandrel for Radial Arm Machines

(1) 23mm 4303-0051 $49.95(2) 22mm 4308-0202 $59.95(3) 20mm 4308-0188 $57.9599-400-0015

$19.9599-400-0004

$19.95

Blind Hole Core Bits Blind Hole Core Bits

Thin Wall Cores

3

Blind Hole Bits

1/2 Gas

1/2 Gas

1/2 Gas

1/2 Gas

1/2 Gas

1/2

Gas

FOR:

Thin Wall Core Bit

2,200 rpmand 35 mm/min.

and other composite glass and porcelain based materials

NEW

1-1/2 Cutting Depth

Size Item # Price1 1107-0177 $79.95

1-1/4" 1107-0179 $84.951-3/8" 1107-0180 $89.951-1/2" 1107-0181 $94.951-3/4 1107-0183 $99.95

2 1107-0184 $119.95

Size Item # Price1" 0802-5589 $89.95

1-1/4" 0802-5592 $89.951-3/8" 0802-5593 $89.951-1/2" 0802-5594 $94.95

Size Item # Price6mm 1104-0100 $39.958mm 1104-0101 $49.95

10mm 1104-0102 $54.9512mm 1104-0103 $64.9514mm 1104-0104 $69.9519mm 1104-0105 $149.95

Size Item # Price14mm 0802-0039 $59.95

Size Item # Price1" 0802-0034 $59.95

1-1/4" 0802-0035 $64.951-3/8" 0802-0036 $69.951-1/2" 0802-0037 $74.95

2" 0802-0038 $79.95

Size Item # Price1/4" 0802-0100 $39.95

9/16" 0802-0101 $49.953/4" 0802-0102 $59.95

Size Item # Price1-3/8" 0802-5598 $129.95

14

Desc Item # Price20x35mm 0801-5585 $89.9520x45mm 0801-5582 $99.9524x60mm 0801-5583 $179.95

Twist Segment 1/2 Gas Finger Bits

Desc Item # Price20x35mm 0801-5588 $94.9520x45mm 0801-5589 $99.95

Standard Green1/2 Gas Finger Bits

Desc Item # Price16x45mm 0801-5590

Call for Pricing

20x60mm 0801-559125x110mm 0801-5592

Electroplated 1/2 Gas Finger Bits

Style Desc Item # PriceHS 20x35mm 0801-5784 $94.95HS 20x45mm 0801-5785 $99.95

High Speed Red Storm1/2 Gas Finger Bits

FULL CNC CATALOG AVAILABLE

CALL TODAY - 800-328-7094

12-16 IPM @ 5,500 RPM Even Wear5-SegmentsSmooth running twist seg.

12 IPM @ 4,800 RPM 5-Segments

14-20 IPM @ 7,000 RPM 7-Segments

NEW

Ideal for marble

For abrasive and hard materials

14-20 IPM @ 6,000-7000 RPM

Desc Item # Price20x35mm 0801-5782 $94.9520x45mm 0801-5783 $99.95

1/2 Gas Finger Bits

10-12 IPM @ 5,000 RPM 5-Segments

FOR:

Blue Universal1/2 Gas Finger Bits

Desc Item # Price20x45mm 0801-5792 $99.95

7.9 IPM @ 4,000 RPM

and other composite glass and porcelain based materials.

CNC

TOOL

ING

- FIN

GER

BITS

NEW

General Purpose

General Purpose

15

CNC TOOLING - FINGER BITS

Introducing theNEW cayenna Finger Bit!

1/2 Gas Finger Bits

Desc. Item # Price25x40mm 0801-2074 $69.9525x50mm 0801-2075 $74.9525x60mm 0801-2076 $79.95

1/2 Gas Finger Bits

Seg. Desc. Item # Price6 22x40mm 0801-6079 $79.953 22x40mm 0801-2645 $79.95

To be used on granite & engineered stones.12-16 IPM @ 5,500 RPM6 Seg = Soft to Medium Stone3 Seg = Soft to Hard Stone

High Speed

Your everyday workhorse!

This is an excellentGeneral PurposeEconomy Finger Bit.

1/2 Gas Finger Bits

Length Item # Price1/2 x 40mm 0801-2651 $109.95

5,500-6,000 RPM 14-20 Inches Per Minute3-SegmentProvides excellent Life, and even segment wear

Very Popular5,500-6,000 RPM15-20 Inches Per Minute5-SegmentExtremely aggressive & free cutting

Desc. Item # Price23x40mm 0801-2677 $89.9523x50mm 0801-2684 $99.95

Desc. Item # Price25x40mm 0801-2688 $79.9525x50mm 0801-2689 $89.95

Highest Quality 5,500-6,500 RPM10-12 IPM @ 5,500 in Hard Stone15-20 IPM @ 6,500 in Soft-Medium StoneOur softest bond finger bit6-Segment

1/2 Gas Tool Holders

On Page 8

Desc. Item # Price25x40mm 0801-6046 $89.95

1/2 Gas Finger Bits

1/2 Gas Finger Bits

10-14 IPM @ 4,500-5,000 RPM5-Segments

The Super Cyclone Finger Bit has a smaller diameter and seven segments designed to cut faster Has a bottom Segment so it can be plunged into the stone Ideal for hard materials10-20 IPM @ 4,500-6,000 RPM

1/2 GasFinger Bit

Adjustable Pressure Honing-Polishing Head

CNC Blade ER 25 Collet Holder

SC

AN

FO

R V

IDE

O

Center Water Feed T-31 Bits

Size Item # Price3/16 4306-0096 $25.951/4 4306-0097 $29.95

ER 25 Collets

16

1 x 1 x 6 Silicon Carbide Stick

Grit Item # Price#24 0809-0002 $5.95

Used for dressing diamond blades and router bits.

Grit Item # Price#150 0809-0001 $2.95


x 2 x 8 Alum Oxide Stick

3M Anti-Seize Compound

A high temperature lubricant designed to lubricate and prevent seizure of close fitting metal parts.

99-03-0041 $15.95

of travel to compensate tool wear and varying thickness without changing Z height. Polish Drain Board, Backsplashes, & back of stone. Great for Cup Wheels and Polishing Heads. Gas Thread. Adjustable Pressure. Snail Lock Adaptor. Center Water Feed. Patent Pending.

Desc. Item # PriceHoning-Polishing Head 0806-0135 $399.00

130mm Attachment 0806-0142 $89.95

Size Item # Price6 0805-0005 $249.958 0805-0006 $199.95

Side Segments allow tighter radiused cutting!

3M Gasket Prep &Parts Cleaner

Designed to remove oil, grease and contaminants from metal surfaces.

99-03-0064 $4.95Contains NOchlorinated solvents

14oz

9oz

Limestone Dresser

Size Item # Price110x30x12 0809-0011 $7.95150x25x50 0809-0010 $8.95


Use this collet holder for any straight shank CNC tools. From etching to anchor slot bits.

Size Collets Price1/8 0802-0041 $25.00

3/16 0802-0044 $25.006MM 0802-0028 $25.00

COLLET WRENCH 0802-0030 $29.50

COLLET HOLDER X 1/2 BSPADAPTOR 1.5 LONG

0802-0025 $225.00

T-31 Bits

On Page 95

Adapter for 50mm to 25mm Arbor 0501-0018 $4.95

Collets not included with holder adapter.

1/4 0802-0026 $25.0010MM 0802-0029 $25.003/8 0802-0027 $25.001/2 0802-0031 $25.00

3/8 Shank

CNC

TOOL

ING

- DRE

SSIN

G ST

ICKS

/ BL

ADES

/ CO

LLET

S

Guide Rail System

4ft. Rail 4914-0040 $142.017ft. Rail 4914-0042 $200.60

12ft. Rail 4914-0044 $322.17

DEAL Rail Kit Combo, 4ft, 7ft, and 12ft 4914-0005 $611.52

IncludesClamps

17

HAND STONE SAWS - TRACK SAW

S

Glide Guide

The premier rail saw straight edge system - for any surface you cannot afford to scratch.

17 4914-0275 $34.9524 4914-0276 $54.9534 4914-0277 $65.9548 4914-0278 $97.9572 4914-0279 $157.9596 4914-0280 $194.95

Track Saw

Track Saw Features: -Saw never touches material -Includes a Skil 8-1/4 worm drive motor =Use 8 diamond blades -Mitre cut, 45 or 60 -13 Amps motor, 115 Volts, 4,300 RPM, 5/8 diamond Knock-out arbor -Depth of cut : 0 2-1/16 , 45 1-7/8, 60 1-5/16 -Two 7 rail set, (cuts up to 14) two clamps, four locking shoes, connector plate & carriage-mounted motor -Expandable rails -Locking device for plunge cutting -Lightweight and portable -Optional vacuum system anchors rails to materials -Saw crated weight: Box 1 - Rails - 35lbs, Box 2 - Acc. - 65lbs -Dimensions: Box 1 Rails - 3x 4 x 7-1/2, Box 2 - Acc.- 36 x 12 x 710

4908-0049 $1,995.95

4914-0289 $895.00

Optional Vacuum System

AWS Carriage Assembly

4903-0017 $101.46

This accessory for the AWS-110/AWS-125 Stone Cutters, is made of high-quality cast aluminum and was designed to be used with the Alpha Universal Carriage Assembly. The sturdy straight edges are available in three (3) lengths and may be purchased individually or as a kit.

Create Straight Cuts Everytime. Utilize this with the guide Rail System.

18

HAND

STO

NE S

AWS

- EL

ECTR

IC P

ORTA

BLE

SAW

S

AWS-110 - 4 Wet Stone Cutter

Specifications: Volts: 110V/60 Hz Power: 1200W, 10.9 Amp Speed: 13,000 RPMMax. cutting depth: 1-1/4 Arbor Size: 20mm Weight: 6.8 lbs.

4101RH 5Masonry Saw

5005BA 5-1/2Circular Saw

Specifications: Blade diameter: 5 Arbor: 3/4 Max. cutting cap. at 90: 1-3/8 Max. cutting cap. at 45: 13/16 No load speed: 12,000 RPM Watts out: 1,050 8 Amps, 120V

Specifications: Blade diameter: 5-1/2 Arbor: 5/8 Max. cutting cap. at 90: 1-3/4 Max. cutting cap. at 45: 1-3/16 No load speed: 8,000 RPM Watts out: 1,050 8 Amps, 120V

AWS-125 - 5 Wet Stone Cutter

Specifications: Volts: 110V Power: 1200W, 11.2 Amp Speed:12,000 RPM Arbor 7/8/22mmMax. cutting depth: 1-5/8 Weight: 7.2 lbs

4100NH 4-3/8Circular Saw

Wet Stone Cutter - Contour Saw

Specifications:Cutting disk diameter: 5Arbor: 7/8, Depth: 1-1/4No-load speed: 12,000 RPMNormal power: 1,200W

Specifications: Blade diameter: 4-3/8 Arbor: 3/4 Cuts up to 1-3/8 No load speed: 13,000 RPM Watts out: 1,150 9.6 Amps, 120VAccepts 5 contour blades to cut round sinks

Skil HD5860 8-1/4 Saw5477NB 7-1/4 Hypoid Saw

Arbor: 5/8Blade Diameter: 7-1/4Max. Cut - 90: 2-3/8Max. Cut - 45: 1-3/4 Max. Cut - 50: 1-9/16 No Load Speed: 4,500 RPM15 Amps (120V)

Arbor: 5/8Blade Diameter: 8-1/4Max. Cut - 90: 2-7/8Max. Cut - 45: 2-1/4 No Load Speed: 4,300 RPM13 Amps (120V)

Accepts contour blades

for sink cutouts

4903-0027 $149.9599-030-0194 $7.14 Carbon Brush

SET

1909-0133 $149.951918-0097 $9.95 Carbon Brush

SET

4911-0038 $369.951918-0097 $10.95 Carbon BrushSET

4903-0013 $289.9599-477-0002 $9.95 Carbon BrushSET

4903-0002 $152.5799-030-0194 $7.14

with electric brake

Carbon BrushSET

4903-0001 $223.0299-030-0194 $9.95 Carbon

BrushSET

4903-0023 $159.9599-477-0039 $9.95 Carbon Brush

SET

4915-0005 $299.9599-MW-0001 $7.00 Carbon Brush

SET

1 Year LimitedWarranty




30 Day LimitedWarranty




9564CV 4.5 Variable SpeedAngle Grinder

GDO601 Die Grinder


1/4 collet capacity Double insulated 1.5 Max wheel diameter High speed (25,000 RPM) 120 Volts, 3.5 AMP Solid aluminum housing AC/DC switch Net weight: 3.7 lbs.1703-0054 $139.95

19

Grinder Gear

On Page 122

PW5001C 4 Variable Speed Wet Stone Polisher

9565CV 5 Variable Speed Angle Grinder

Grinding Wheel: 5 Sanding Disc: 5 Speed: 2,800-10,500 RPM 120 Volts, 12 Amps Spindle Thread: 5/8-11 Overall Length: 11-3/4 Net Weight: 4.0 lbs. Soft Start

Super Joint System (SJS) helps prevent gear damage

9566CV 6 Variable SpeedAngle Grinder

Speed: 4,000 - 9,000 RPM 120 Volts, 12 Amps Spindle Thread: 5/8-11 Length: 11-3/4 Net Weight: 5.3 lbs. Soft Start

Grinding Wheel: 4.5 Sanding Disc: 4.5 Speed: 2,800-10,500 RPM 120 Volts, 12 Amps Spindle Thread: 5/8-11 Overall Length: 11-3/4 Net Weight: 4.0 lbs. Soft Start

9227C 7 Variable SpeedPolisher

Sanding Disc 7" Wool Bonnet 7" No Load RPM 600-3,000 120 Volts, 10 Amps Spindle Thread: 5/8-11 Overall Length: 18-1/2 Net Weight: 6.8 lbs.






LE 9-10-125 5 Variable Speed Grinder

No Load Speed: 6,000-10,000 RPM 120 Volts, 7.9 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 4.3 lbs.


1909-0200 $149.95 99-765-0167 $10.95 Carbon Brush

GFI Protected Speed: 2,000 - 4,000 RPM 120 Volts, 7.9 Amps Spindle Thread: 5/8 - 11 Overall Length: 12-1/4 Net Weight: 4.6 lbs. Soft Start

WE9-125 Variable Speed Electric Angle Grinder

No Load Speed: 3,000-10,000 RPM 120 Volts, 8.5 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 5.4 lbs.

GRINDERS & POLISHERS - ELECTRONIC HAND TOOLS

1909-0079 $299.95 3904-0055 $12.95 Carbon BrushSET

1909-0153 $199.95 3904-0055 $12.95

1909-0179 $154.95 3904-0055 $12.95 Carbon BrushSET

1909-0108 $159.95 3904-0055 $12.95 Carbon BrushSET

1909-0017 $229.95 1918-0097 $10.95 Carbon BrushSET

Carbon BrushSET


1909-0039 $159.95 99-498-0010 $12.95 Carbon BrushSET

LE-12-3-100 WET PolisherL-12-3-100 WET Polisher

Single Speed: 3,700 RPM 120 Volts, 9.3 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 5.29 lbs.


3905-0037 $324.99 99-765-0146 $11.95 Carbon Brush

SingleSpeed

VariableSpeed

20

LW 1509 4.5 High Speed Wet Angle Grinder

LW 1503 5 Angle Polisher

No Load Speed: 3,700 RPM 120 Volts, 7.4 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 4.4 lbs.

No Load Speed: 8,300 RPM 120 Volts, 7.1 Amps Spindle Thread: 5/8-11 Max disc diameter: 4.5 Net Weight: 4.8 lbs.

LW 603 VR 5 Variable Speed Angle Polisher

No Load Speed: 1,000-2,800 RPM 120 Volts, 13 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 7.5 lbs.




Variable Speed: 1,200-3,700 RPM 120 Volts, 9.3 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 5.29 lbs.


L 1503VR 5 Variable Speed Polisher/Grinder

No Load Speed: 1,200-3,700 RPM 120 Volts, 10 Amps Spindle Thread: 5/8-11 Max tool diameter: 6 Net Weight: 4.2 lbs.


GRIN

DERS

& P

OLIS

HERS

- EL

ECTR

ONIC

HAN

D TO

OLS

1909-0019 CALL 1918-0018 $6.95 Carbon Brush1909-0041 $399.95 1918-0018 $6.95 Carbon Brush

1909-0028 $499.95 99-765-0104 $7.95 Carbon Brush

3905-0036 $360.99 99-765-0146 $11.95 Carbon Brush

3905-0021 $259.95 1918-0018 $6.95 Carbon Brush

Water Adapters Pg. 27

Flexible Water HosePage 28

PWE11-110 4 Wet Polisher No Load Speed: 1,700 - 5,400 Backing pad size: 4-5 Rated input watts: 1,100 Amps: 9.6 Maximum torque: 34 in. lbs Spindle thread: 5/8 - 11 Tool length: 12.7 Net Weight: 5.2 lbs.

1909-0198 $289.9599-498-0016 $10.95Carbon BrushSET

Ask Aboutthe Metabo

3-Year Tool Warranty

21

Grinder Gear

On Page 122

L 1506 VR 5 Angle Grinder



L 3410 VRG 5 Variable Speed Angle Grinder



GRINDERS & POLISHERS - ELECTRONIC HAND TOOLS

AWP-158 5 Electric Polisher

No Load Speed: 3,000 RPM 110 Volts, 7.8 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 6 lbs.

VSP-120 5 Variable Speed Electric Polisher

No Load Speed: 500-2,800 RPM 120 Volts, 7 Amps Spindle Thread: 5/8-11 Max disc diameter: 5 Net Weight: 7.3 lbs.



1909-0052 $277.78 99-030-0177 $6.93 Carbon BrushSET 1909-0161 $306.78 99-030-0227 $7.56Carbon Brush

SET

WE14-125 Variable Speed Electric Angle Grinder

PE12-175 7 Angle Polisher


No Load Speed: 700-2,200 RPM 120 Volts, 10 Amps Spindle Thread: 5/8-11 Max disc diameter: 7 Net Weight: 5.9 lbs. Extremely high torque: 124 inch lbs.



1909-0151 $209.95 99-498-0017 $8.95 Carbon BrushSET 3905-0014 $299.95 99-498-0010 $12.95Carbon Brush

SET

1909-0013 $239.95 1918-0018 $6.95 Carbon Brush 1909-0084 $209.95 99-765-0057 $12.95 Carbon Brush

Top Performing Polisher!

MP-7170-WATERAir Wet Stone Grinder

MP-3760-WATERAir Wet Stone Grinder

1909-0002 $399.951909-0001 $329.95

Air Consumption: 9 CFM Max Speed : 6,000 rpm Net Weight: 8.75 lbs. Spindle Thread : 5/8-11 Air Inlet: 1/4 NPT

Air Consumption: 9 CFM Max Speed : 4,500 rpm Net Weight: 5.5 lbs. Spindle Thread : 5/8-11 Air Inlet: 1/4 NPT

MVP 5 Pneumatic Polisher

Spindle Size: 5/8-11 Max. Speed: 5,500 RPM Air Usage: 16 CFM at 90 PSI Weight: 2.8 lbs. Air Inlet: 1/4

REARExhaust


3905-0044 $325.00

22

REMEMBER TO OIL YOUR AIR TOOLS!

Spindle: 5/8-11 Speed: 4,500 RPM Air Usage: 16 CFM at 90 PSI 4 Grinding Wheel Size Net Weight: 3.3 lbs

BEST TOOL IN ITS CLASS, AT THE BEST PRICE !

S-9 Pneumatic Water PolisherGCT90 Day Limited

Warranty

BD-5000 5 Wet Air Grinder

1909-0186 $374.95

REARExhaust

REARExhaust



PLW 923S 4 Air Stone Sander/Polisher

Spindle Size: 5/8-11 Max. Speed: 3,600 RPM Air Usage: 15.19 CFM at 90 PSI Weight: 2.8 lbs. Length: 9-1/2 Air Inlet: 1/4 Hose Size: 1/4

REARExhaust


Check online for more air hoses & fittings!www.granitecitytool.com

GRIN

DERS

& P

OLIS

HERS

- AI

R HA

ND T

OOLS

1909-0071 $149.95

Shaft Thread: 5/8-11 RPM: 250 to 5,500 Air Usage: 16 CFM at 90 PSI Air Inlet: 1/4 NPT Output: 320W Length: 10-1/4 in. Max. Disc Size: 5 Weight: 4 lbs.

BD-2321WR 5 Rear Exhaust Wet Air Polishing Tool

1909-0150 $339.95

Shaft Thread: 5/8-11 RPM: 10,000 Air Usage:15 CFM at 90 PSI Air Inlet: 1/4 NPT Output: 650W Length: 9 in. Max. Disc Size: 5 Weight: 4 lbs.

3905-0030 $249.95

CatOilCatOil is the superior industrial non-synthetic lubricant for your compressors, tools and robotics. CatOil protects O-Rings, Seals and Gaskets while with standing pressures in excess of 100,000 psi.

4 oz 99-03-0067 $4.95Qt. 99-03-0068 $14.95

25 Air HosesOffering air hose to suit your needs, blue and red!

1/4 NPT 2702-0029 $13.953/8 NPT 2701-0058 $19.95

AIR-658 Pneumatic Polisher

Air Consumption: 16 CFM Air Pressure: 85-95 PSI Speed: 2,500 RPM Weight: 2.64 lbs. Spindle: 5/8-11 Air Inlet: 1/4 NPT

Air Consumption: 10 CFM Air Pressure: 87 PSI Speed: 5,800 RPM Weight: 1.60 lbs. Spindle: 5/8-11 Air Inlet: 1/4 NPT

REARExhaust

REARExhaust

AIR-300 Mini Pneumatic Polisher



3905-0018 $362.25 3905-0035 $344.40

DIAMAXINC.COM/MVP

24

LCP 1703 VR

The Perfect Machine For The Perfect Finish On Concrete, Granite & Marble. Rugged, reliable hand-operated 12 platform made of Duralimin, a hardened, anodized aluminum. Center water feed for wet applications can be shut off for efficient dry operation. Uses 3 - 5 diamond polishing pads.

Tool Weight: 29lbsMotor: 110V/60Hz, 10Amps, GCFI Protected

Driver Speed: 1,100-3,400 RPMPlaten Speed: 600-1,930 RPMPlatform Speed: 157-481 RPM

3905-0031 $2,199.95

Dust Shroud3905-0033 $179.95


Mudslinger Diamond Polishing Pads Grit 5 Price50 4106-1009 $39.95

100 4106-1010 $39.95200 4106-1011 $39.95400 4106-1012 $39.95800 4106-1013 $39.95

1500 4106-1014 $39.953000 4106-1015 $39.95

50-3000 6001-0264 $279.30

Very high quality High power polisher needed

The Mudslinger Pads are 8mm thick, can be run wet or dry. Tests show 4 to 5 times longer life than other leading polishing pads on the market today.

Much easier to stay flat Q.R.S backing

110V for ease and convenience Movement is forced driven planetary, (gear and belt) with three left-thread heads (5/8-11 attachment) Wide variety of tooling available for many applications

LAVINA 12

1802-0030 $2,340.00

Driver Speed: 900-2500 rpmPlatform Speed: 153-460 rpmPlaten Speed: 780-2340 rpmPlaten Size: 5Tool Weight: 36 lbs.5/8-11 spindles (3)


DS-3011

Voltage: 120V, 60HzCurrent: 11 AmpsDriver Speed: 2,500 RPMPlatform Speed: 405 RPMPlaten Speed: 2,100 RPMPlaten Size: 5Tool Weight: 30 lbs.5/8-11 spindles (3)

Will produce a FLAT, SWIRL-FREE FINISH on monument work, countertops, floors, walls and steps using coated abrasives, diamond polishing discs or diamond cup wheels.

SAND GRIND HONE POLISH

3905-0008 $2,195.95

99-450-0018 $89.95

Extra Slurry Skirt1 Year LimitedWarranty

Brazed Hard Diamond Discs

These diamond pads are the best for fast stock removal. They are rigid and the edges are tapered for flat polishing and lippage removal.

Grit 5 Price#30 1806-0028 $55.00#60 1806-0371 $55.00

#120 1806-0248 $51.85#220 1806-0370 $51.85Q.R.S backing

GRIN

DERS

& P

OLIS

HERS

- PL

ANET

ARY

ELEC

TRIC

HAN

D TO

OLS

25

EDGING MACHINES - ROCKBITER / BEAVER / ROUTERS

STONE PRO - Beaver Rock Pitch Slab EdgerCreate a chiseled stone edge with ease with the Beaver from Stone Pro. Anyone can rock pitch perfectly with this easy-to-use machine. No more broken corners or sloppy edges. Air supply: 3 cfm at 90 psi (1/4 npt connection). Plastic base plate prevents scratching. Creates a natural, chiseled edge great for inside and outside radius edging and 90 corners. Comes complete and ready to use.

1-5/8 Bite 4305-0007 $1,995.952-3/4 Bite 4305-0008 $2,995.95

2-3/

41-

5/8

ROCKBITER I & IICan c

hisel stone

from 2cm

to 4cm.

The solution to efficiently produce chiseled looking edges on fabricated stone surfaces. Requires less skill and training than hammer and chisel methods.

I

II Can c

hisel from 4

cm to 6cm

on all stone

s.

I

II Replacement Blades

LWW2106VR 40mm Edge Shaping Machine

LWW1506VR30mm Edge Shaping Machine

Lightweight and preferred over large routers for 30mm material. Includes GFI.

Heavy duty and costs much less than comparable routers for 40mm material. Includes GFI.

Power Input: 120V, 11 AMP Var. Speed: 2,200-6,500 RPM Weight: 12-3/4 lbs

Power Input: 120V, 15 AMP Var. Speed: 1,800-5,500 RPM Weight: 22 lbs

1/2 Gas M to5/8-11

M10x1.5



LimitedWarrantyS

CA

N F

OR

VID

EO

Extra Chisel Teeth:1-5/8 3302-0081 2-3/4 4305-0009

3112-0028 $795.95

3112-0030 $895.95 3112-0031 $109.95

4305-0001 $895.951918-0018 $6.95

4305-0002 $1,695.0099-765-0118 $20.95

4308-0095 $39.954308-0097 $39.95

1/2 Gas M to5/8-11

M10x1.5

4308-0095 $39.954308-0097 $39.95

Carbon BrushCarbon Brush

Sector Triple Speed Portable Edge Profiler

The Sector Triple Speed Portable Edge Profiling Machine has three distinct rotation speeds: a low speed of 2,600 RPMs for polishing natural and synthetic stone, an intermediate speed of 6,000 RPMs for stock removal and finishing of synthetic stone, and a high speed of 10,000 RPMs for grinding natural stone. The Sector Triple Speed Portable Edge Profiling Machine is equipped with an electronic vectorial inverter to optimize the supplied power, maintaining constant the torque at any RPM. The Sector Triple Speed Portable Edge Profiling Machine is supplied with single phase tension 230V/50-60Hz so it can be plugged into a standard single phase outlet.

4305-0038 $4,386.50

Carbon BrushSET

Oscillating Heads

On Page 37

Contour Cat - KS-80\3

This German built industrial 2 hp, variable speed router is the most versatile machine ever built for countertop work. Perfect for edging countertops up to 4cm using Diamond Router Bits. Also is small enough to cleanup, edge and polish inside sink holes! No other machine on the market can do all this. The machine has a height adjustment plate, splash guard, and a central and external waterfeed. Felt plate to help prevent surface scratching. The motor is very powerful and will last for years.

5/8-11 threaded arbor** Voltage: 120V - 56/60 Hz Power Input: 1,500W Horse power: 2.0 hp, 12.5 Amp

Comes with FREE

heavy duty carrying case

Variable Speed

Max. Tool Diameter: 5 (120mm) Variable Speed: 2,700 to 6,500 RPM Weight: 14.3 lbs.

6 Month LimitedWarranty

4306-0080 $2,995.004308-0044 $39.95

4308-0087 $39.955/8-11 Female to Ghines Female (M10X1.5)

Spindle (stainless steel)Rotation speeds: 2,600, 6,000 or 10,000 rpmRise and fall: 35 mmFrame: die-casted aluminium housingPower: 2.6HP (2 kW)Supply tensions: 230V/50-60Hz single phaseThermal overload safety cut-outMachine: 14 x 22 x 14 (350 x 550 x 350 mm)Machine Weight: 73 lbs. (33 kg)Power unit: 14.5 x 18.5 x 9 (370 x 470 x 230 mm)Power Unit Weight: 33 lbs. (15 kg)Shipping Weight: 140 lbs. (63 kg)

with aquaplaning base

ONLY ATGRANITE CITY TOOL

26

HAND

STO

NE S

AWS

- GH

INES

/ GA

LESK

I ROU

TERS

27

ADAPTERS - ACCESSORIES / LOC LINE

1 1/2 Shaft to 5/8-11 Male Thread 4308-0084 $29.952 3/8 Shaft to 5/8-11 (M) 4308-0122 $39.953 5/8-11 Fem. to 5/8-11 Male Ext. W/Waterfeed 4308-0115 $39.954 5/8-11 Female to Ghines Female (M10X1.5) 4308-0087 $39.955 1/2 Gas Male to 5/8-11 Male Router 4308-0095 $39.956 1/2 Gas Male to Hole For 1/4" Shaft 4308-0100 $59.957 1/2 Gas Male Thread to Hole for 3/8" Shaft** 4308-0099 $59.95

8 1/2 Gas Male to Hole For 1/2" Shaft 4308-0101 $59.959 1/2 Gas Male to Ghines Female (M10X1.5) 4308-0097 $39.95

10 5/8-18 Male Machine to 5/8-11 Male Thread 4308-0093 $59.9511 5/8 x 18 Male to 1/2 Gas Female 4308-0083 $59.9512 Retension Cap for Speedy Mandrel 99-400-0015 $19.9513 Brass Sleeve for Speedy Mandrel 99-400-0004 $19.9514 Speedy Tip Mandrel with Cap & Brass Sleeve 4308-0135 $189.95

1 2 3 45 6 7 8 9 10

11

12

Flush Mount Adapters Quad DriveAdaptersFlush adapters make

the back side of the blade flush allowing difficult flush cuts. The 4-hole adapter is for 4 - 7 blades. The 8-hole adapter is for 8 - 14 blades.

5/8-11 Flange

AdaptersThese adapters are used to hold blades with 7/8 openings to prevent them from riding on the threads of the grinder.

Desc. Item # PriceNut Clamp 99-765-0027 $5.95Nut Flange 99-765-0026 $4.95

Desc. Item # Price8-Hole Alum. 0501-0055 $49.954-Hole Steel 0501-0045 $19.954-Hole Brass 0501-0021 $14.95

Loc-Line Nozzles & Hoses

1 1/16 Round Nozzle for 1/4 Line 2713-0005 $2.952 1/8 Round Nozzle for 1/4 Line 2713-0006 $2.953 1/8 Round NPT Connector for 1/4 Line 2713-0004 $2.954 1/4 In-Line Valve 2713-0008 $7.955 1/4 Round Nozzle for 1/4 Line 2713-0007 $2.956 1/4 Round NPT Connector for 1/4 Line 2713-0002 $2.957 1/4 Y Fitting 2713-0011 $2.95

41 2 53 6 879

1410

11

8 1 Flare Nozzle for 1/4 Line 2713-0003 $2.959 1-1/4" Flare Nozzle for 1/2" line 2pk 2713-0013 $8.95

10 1/4" x 13" Hose Kit - 2 Conn. & 3 round nozzles 2713-0009 $9.9511 1/2" x 11" Hose Kit - 2 Conn. & 3 round nozzles 2713-0014 $12.9512 1/4" Blue Hose (per ft.) 2713-0001 $6.9513 1/2" Blue Hose (per ft.) 2713-0015 $8.9514 1/4" Hose Assembly Pliers 2713-0010 $14.95

12 13

Call or Check out our website www.granitecitytool.com for our full line of adapters!

Waterfeed Attachments

Waterfeed Attachment for Grinders/Saws 1918-0022 $49.95

Water Couplers

1918-0095 $9.95

99-765-0095 $9.95

Quick Connect Water Hose Adapter 3/8

FEMALE PLUG 1/4 Water Hose

1/4 2707-0134 $2.953/8 2707-0129 $2.951/2 2707-0131 $2.95

3/8 2707-0130 $2.951/2 2707-0132 $2.95

Garden Hose Fittings

Female Adapters

Male Adapters

Works onAlpha Blades.

Not for all blades.

13

14

Desc. Item # Price4-Hole Brass 0501-0001 $24.03

7/8 to 5/8-11 Arbor Adaptor

Item # Price4308-0027 $19.95

FOR GRINDERS

Will t the following grinders:- Metabo WE9-125Quick- Dewalt DW402- Ridgid R1000- Makita 9527PB- Bosch 1710- Hitachi G12SE2- Milwaukee 6148-6

INSTALLS IN SECONDS GREAT FOR CRACK-

CHASING AND TUCKPOINTING

ADJUSTABLE DEPTHOF CUT

NON-MARKINGWHEELS

Concrete, Marble, Limestone, etc.

GRINDER CADDY BLADE ROLLERFOR 4" AND 4-1/2" GRINDERS

USES: SCORING DECORATIVE LINES; TUCK POINTING;STONE AND MASONRY WORK; FABRICATION;CRACK CHASING.

PT. NUMBER

#BR45003

FOR GRINDERS

Will t the following grinders:- Metabo WE9-125Quick- Dewalt DW402- Ridgid R1000- Makita 9527PB- Bosch 1710- Hitachi G12SE2- Milwaukee 6148-6

INSTALLS IN SECONDS GREAT FOR CRACK-

CHASING AND TUCKPOINTING

ADJUSTABLE DEPTHOF CUT

NON-MARKINGWHEELS

Concrete, Marble, Limestone, etc.

GRINDER CADDY BLADE ROLLERFOR 4" AND 4-1/2" GRINDERS

USES: SCORING DECORATIVE LINES; TUCK POINTING;STONE AND MASONRY WORK; FABRICATION;CRACK CHASING.

PT. NUMBER

#BR45003

Installs in seconds Great for crack-chasing & tuck pointing Adjustable depth of cut Non-marking wheels

for 4, 4-1/2 & 5 grinders

Blo Gun

OSHA type Blow Gun controls air stream pressure at the nozzle tip, yet provides enough volume for safe air nozzle cleaning.

2701-0012 $9.95

25 Air HosesOffering air hose to suit your needs, blue and red!

1/4 NPT 2702-0029 $13.953/8 NPT 2701-0058 $19.95

Check online for more air hoses and fittings!www.granitecitytool.com

28

Use wet only

Water Jackets for Center Water Feed Tools

Description Item # Price1/2 shaft to 5/8-11 with 1/4 hose conn. 1918-0083 $179.951/2 shaft to 5/8-11 with 1/2 hose conn. 1918-0084 $179.95

1/2 shaft to 5/8-11 with garden hose conn. 1918-0085 $189.95

5/8-11 fem. to 5/8-11 male with 1/4 hose conn. 1918-0086 $189.955/8-11 fem. to 5/8-11 male with 1/2 hose conn. 1918-0087 $199.95

5/8-11 fem. to 5/8-11 male with garden hose conn. 1918-0088 $199.95

1/2 shaft to 1/2 gas with 1/4 hose conn. 1918-0089 $159.951/2 shaft to 1/2 gas with 1/2 hose conn. 1918-0090 $179.95

1/2 shaft to 1/2 gas with garden hose conn. 1918-0091 $149.95

Flexible Water Hose Assembly with Fittings

10-1/4 hose with quick-change connector (to fit Flex and Makita waterfeed grinders) on one end and standard female hose connector on other end.

1918-0094 $19.95

Grinder Caddy Blade Roller

*Angle Grinder not included

4903-0021 $54.95

The Original Blade Roller

Non-ma

rking

wheels

Will fit Skil HD5860 (8-1/4), and Makita Hypoid 4903-0004 $69.954903-0006 $64.95

GFCI Included

GFCI Cord

1918-0102 $49.95

Have in-line mechanical G.F.C.I. centrally placed along the cord, test and reset buttons.

S-9 Polisher Parts

1/4 2702-0037 $1.29

48-1 99-113-0043 $2.95

Hose Barb / Male Metric

Air/Water Hose ReinforcedSold by the foot

Air Hose Connectors

1 Nipple Detachable 1/4", 1/4" Male 2707-0018 $2.952 Nipple Detachable 1/4", 1/4" Female 2707-0019 $2.953 Coupling 1/4" Male, 1/4" 2707-0052 $7.954 Coupling 1/4" Female, 1/4" 2707-0159 $7.955 1/4" x 3/8" ID Hose Barb Steel 2707-0160 $3.956 1/4" x 1/4" ID Hose Barb Steel 2701-0097 $3.95

41 2 53 6

Water Feed Kit

ADAP

TERS

- AC

CESS

ORIE

S

POS. Item # Price1 (00) 4313-1407 $399.95

2 4313-1402 $399.953 ED 4313-1403 $394.95

4 4313-1404 $213.955 4313-1405 $213.956 4313-1406 $213.95

A20r10 A30r15 A40r20

B30r30 F20 F30

FS30r4 V30r15 V40r20

POS. Item # Price1 (00) 4313-1415 $475.95

2 4313-1410 $475.953 ED 4313-1411 $415.95

4 4313-1412 $235.955 4313-1413 $235.956 4313-1414 $235.95

POS. Item # Price1 (00) 4313-1423 $537.95

2 4313-1418 $537.953 ED 4313-1419 $436.95

4 4313-1420 $305.955 4313-1421 $305.956 4313-1422 $305.95

POS. Item # Price1 (00) 4313-1434 $566.95

2 4313-1429 $566.953 ED 4313-1430 $512.95

4 4313-1431 $235.955 4313-1432 $235.956 4313-1433 $235.95

POS. Item # Price1 (00) 4313-1473 $578.95

2 4313-1468 $578.953 ED 4313-1469 $443.95

4 4313-1470 $235.955 4313-1471 $235.956 4313-1472 $235.95

POS. Item # Price1 (00) 4313-1457 $386.95

2 4313-1452 $386.953 ED 4313-1453 $415.95

4 4313-1454 $213.955 4313-1455 $213.956 4313-1456 $213.95

POS. Item # Price1 (00) 4313-1481 $578.95

2 4313-1476 $578.953 ED 4313-1477 $443.95

4 4313-1478 $235.955 4313-1479 $235.956 4313-1480 $235.95

POS. Item # Price1 (00) 4313-1465 $468.95

2 4313-1460 $468.953 ED 4313-1461 $512.95

4 4313-1462 $235.955 4313-1463 $235.956 4313-1464 $235.95

POS. Item # Price1 (00) 4313-1489 $647.95

2 4313-1484 $647.953 ED 4313-1485 $470.95

4 4313-1486 $263.955 4313-1487 $263.956 4313-1488 $263.95

Portables

29

ROUTERS & PROFILERS - DIAMUT ROUTER BITS

Diamut Portables are very fast working.

New innovative technology allows for aggressive and fast grinding.

The Flash polishers are a first inperformance and design.

CommonProfiles

Diamond Router Bits

SEGMENTED

30

Shape Size Profile POS 1 POS 2 Price1 1-30 Pencil 4313-0466 4313-1506 $319.95A 1/4 Radius 4313-0036 4313-0096 $169.95A 3/8 (10mm) Radius 4313-0037 4313-0097 $169.95A 5/8 (15mm) Radius 4313-1175 4313-1176 $239.95B 3/8 (10mm) Half Bullnose 4313-0038 4313-0088 $179.95B 1/2 (15mm) Half Bullnose 4313-0039 4313-0089 $179.95B 3/4 (20mm) Half Bullnose 4313-0040 4313-0090 $179.95B 1 (25mm) Half Bullnose 4313-1194 - $259.95B 1-1/4 (30mm) Half Bullnose 4313-0041 4313-0091 $269.95B 1-1/2 (40mm) Half Bullnose 4313-0382 - $529.95

B+B 1-1/4 (30mm) Triple Waterfall 4313-0234 4313-0235 $419.95D 1-1/4 (30mm) D 4313-0495 - $679.95E 3/4 (20mm) Bevel 45 4313-0042 4313-1191 $189.95E 1-1/4 (30mm) Bevel 45 4313-0043 - $239.95E 1-1/4 (30mm) Bevel 30 4312-0115 4312-0117 $442.00

E+E 1-1/4 (30mm) Double Bevel 4313-1185 4313-1186 $289.95F 3/4 (20mm) Ogee 4313-0044 4313-0052 $159.95F 1-1/4 (30mm) Ogee 4313-0045 4313-0053 $229.95F 1-1/2 (40mm) Ogee 4313-0383 - $649.95

FA 3/4 (20mm) American Ogee 4313-1142 4313-1190 $229.95FAV 1-1/4 (30mm) Ogee Full Bull. 4313-0321 4313-0464 $409.95FAV 1-1/2 (40mm) Ogee Full Bull. 4313-0322 4313-0427 $479.95FV 1-1/4 (30mm) Ogee Bullnose 4313-0348 4313-0349 $399.95FV 1-1/2 (40mm) Ogee Bullnose 4313-0201 4313-0202 $409.95

F+V 1-1/4 (30mm) Ogee+Bullnose 4313-0419 4313-0420 $529.95F+V 1-1/2 (40mm) Ogee+Bullnose 4313-0394 4313-0395 $589.95

H 3/4 (20mm) Dupont 4313-0208 4313-0209 $199.95H 1-1/4 (30mm) Dupont 4313-0212 4313-0301 $229.95

HV 1-1/4 (30mm) Dupont 4313-0358 4313-0359 $369.95HV 1-1/2 (40mm) Dupont 4313-0350 4313-0351 $399.95L 3/4 (20mm) Cove 4313-0345 - $269.95L 1-1/4 (30mm) Cove 4313-0330 4313-0331 $299.95M 1-1/4 (30mm) Stair Tread 4313-0442 - $479.95M 1-1/2 (40mm) Stair Tread 4313-0443 - $599.95O 3/4 (20mm) Cove Dupont 4313-0431 4313-1168 $309.95O 1-1/4 (30mm) Cove Dupont 4313-0220 4313-0221 $359.95

OG 1-1/4 (30mm) OG 4313-1490 4313-1491 $529.95Q 3/4 (20mm) Cove Ogee 4313-0210 4313-0211 $309.95Q 1 (25mm) Cove Ogee 4313-0332 4313-0333 $299.95

RH 3/4 (20mm) RH 4313-0494 4313-1167 $309.95RH 1-1/4 (30mm) RH 4313-0492 - $469.95

RH-A 3/4 (20mm) RH-A 4313-0328 4313-0329 $399.95SFV-III 1-1/4 (30mm) Ogee Bullnose 4313-1153 4313-1158 $529.95SFV-IV 1-1/4 (30mm) Ogee Bullnose 4313-1182 4313-1183 $529.95

T 3/4 (20mm) Double Eased 4313-1165 4313-1166 $389.95T 30/40mm Double Eased 4313-0387 - $389.95

TP 1-1/4 (30mm) Waterfall Bull. 4313-1146 - $499.95U 3/4 (20mm) U 4313-1172 - $409.95U 1-1/4 (30mm) U 4313-0368 4313-0369 $449.95V 3/4 (20mm) Full Bullnose 4313-0046 4313-0092 $279.95V 1-1/4 (30mm) Full Bullnose 4313-0047 4313-0093 $279.95V 1-1/2 (40mm) Full Bullnose 4313-0048 4313-0094 $299.95V 5CM 50mm) Full Bullnose 4310-0196 4310-0199 $599.95V 6CM (60mm) Full Bullnose 4310-0160 4310-0194 $699.95Z 3/4 (20mm) Straight 4313-0049 - $289.95Z 1-1/4 (30mm) Straight 4313-0050 - $289.95Z 1-1/2 (40mm) Straight 4313-1145 4313-1164 $209.95

High performance proved!Fast cutting and long lasting!

Shape Size Profile POS 0 PriceA 5/8 (15mm) Radius 4313-1174 $259.95B 3/4 (20mm) Half Bullnose 4313-0590 $219.95B 1-1/4 (30mm) Half Bullnose 4313-0518 $319.95E 3/4 (20mm) Bevel 45 4313-0030 $199.95E 1-1/4 (30mm) Bevel 30 4312-0114 $442.00

E+E 1-1/4 (30mm) Double Bevel 4313-1184 $319.95F 3/4 (20mm) Ogee 4313-0503 $209.95F 1-1/4 (30mm) Ogee 4313-0491 $289.95

FV 1-1/4 (30mm) Ogee Bullnose 4313-1195 $429.95L 1-1/4 (30mm) Cove 4313-1173 $319.95

OG 1-1/4 (30mm) OG 4313-1449 $589.95SFV-III 1-1/4 (30mm) Ogee Bullnose 4313-1152 $589.95SFV-IV 1-1/4 (30mm) Ogee Bullnose 4313-1181 $589.95

V 3/4 (20mm) Full Bullnose 4310-0361 $300.00V 1-1/4 (30mm) Full Bullnose 4310-0219 $319.95V 1-1/2 (40mm) Full Bullnose 4313-1160 $339.95

ROUT

ERS

& PR

OFILE

RS -

APEX

X RO

UTER

BIT

S

Longer life than brazed wheels, money back guarantee!

Call or Check out our website www.granitecitytool.com for our full line of Electroplated Tooling!

31

ROUTERS & PROFILERS - BLUE DIAMOND ROUTER TOOLS

POS 130/40 Diamonds

Plated Wheels with Ghines Connectionwith Bearing & Center Waterfeed

Granite City Tool can Re-Tip and Re-Electroplate most Blue Diamond Tools in 3-10 days.

Profile Wheels with 5/8-11 threaded connectionwith Bearing & Center Waterfeed

POS 130/40 Diamonds

POS 2

AVAILAB

LE BY

SPECIAL

ORDER

POS 2

AVAILAB

LE BY

SPECIAL

ORDER

Granite City Tool can Re-Tip and Re-Electroplate most Blue Diamond Tools in 3-10 days.

30/40 Diamonds

30/40 Diamonds

Form Size Profile Bearing Thick Item # PriceB 1/4 R Half Bullnose Bottom --- 4309-0043 $155.08B 3/8 R Half Bullnose Bottom 2 cm (A) 4309-0044 $208.46V 2 cm R Full Bullnose Middle 2 cm 4310-0114 $299.95V 3 cm R Full Bullnose Middle 3 cm 4310-0116 $335.69V 2 Full Bullnose Middle 2 4310-0118 $482.77F 2 cm Ogee Bottom 2 cm 4304-0092 $195.08F 3 cm Ogee Bottom 3 cm 4304-0093 $249.38E 45, 1/4 Bevel Bottom --- 4312-0012 $134.00E 45, 1/2 Bevel Bottom --- 4312-0013 $169.95

Form Size Profile Bearing Thick Item # PriceB 1/4 R Half Bullnose Bottom --- 4309-0036 $199.95B 3/8 R Half Bullnose Bottom 3 cm (A) 4309-0040 $273.08B 2 cm R Half Bullnose Bottom 3 cm 4309-0061 $373.23V 3 cm Full Bullnose Middle 3 cm 4310-0110 $508.92V 2 Full Bullnose Middle 2 4310-0111 $533.08F 3 cm Ogee Bottom 3 cm 4304-0096 $334.46E 45, 1/4 Bevel Middle --- 4312-0018 $202.00

1/2 Shaft Router Toolswithout Bearing

Form Size Item # PriceZ 1/2 Dia x 1 1/2 lg. Blunt end 1916-0005 $58.15Z 1/2 Dia x 1 1/2 lg. Blunt end w/slot 1916-0007 $71.08Z 1/2 Dia x 1 1/2 lg. Sphere end 1916-0006 $59.85Z 1/2 Dia x 1 1/2 lg. Sphere end w/slot 1916-0008 $72.77V 2 cm x 1-3/4 4310-0149 $206.77

1/2 Shaft Router Toolswith Bearing

Form Size Item # PriceV 3/16 R x 1 3/4 4309-0048 $127.69V 1/4 R x 1 3/4 4309-0049 $132.46F 3 cm R x 3 4304-0091 $273.08E 45 Bevel, 3/4 x 1 1/4 4312-0015 $153.54

F POS 1 F POS 2 Q RE

V 1-1/4 z 1-1/4

B 3/4B 1/2

32

These Profilers are designed to produce everything from roundovers to vertical grinding on granite, engineered stone, and porcelain tile and slab. The nylon guide slides along the surface and the rotary toucher controls the depth of the cut to make this tool nearly goof-proof. 3,500 max, RPM 5/8-11 thread.

Profiler Wheels

ROUT

ERS

& PR

OFILE

RS -

PROF

ILER

WHE

ELS

Shape Size Item # PriceB 3/16 Roundover 4315-0003 $141.26B 3/8 Roundover 4315-0001 $141.26B 1/2 Roundover 4315-0013 $165.03B 3/4 Roundover 4315-0002 $176.76E 1 Holl. Bevel 4315-0015 $232.93

F Pos.0 3/4 Bevel 4315-0016 $316.01F Pos.1 3/4 Ogee 4315-0014 $329.03F Pos.0 1-1/4 Bevel 4304-0114 $338.86F Pos.1 1-1/4 Ogee 4304-0115 $359.05

Q 1/4 Recessed 4315-0017 $196.02RE 3/8 Int. Bevel 4315-0012 $191.69V 1-1/4 Full Bull 4310-0101 $388.08V 1-1/2 Full Bull 4310-0197 $468.00Z 1-1/4 Vert. Grind 4315-0011 $240.02Z 1-1/2 Vert. Grind 4315-0018 $306.56

Diamond Stone Profilers

Fast stock removal, 4,000 Max RPM 5/8-11 female thread for angle grinders These cost effective stone profilers are made to work aggressively.

Shape Size Item # PriceB 3/16 R 1912-0220 $99.95B 3/8 R 1912-0221 $99.95B 1/2 R 1912-0222 $119.95B 3/4 Half Bull 1912-0223 $124.95E 3/16 Bevel 4312-0104 $99.95E 3/8 Bevel 1912-0219 $129.95F 3/4 Ogee 1912-0056 $175.00V 3/4 Full Bull 1912-0244 $239.95V 1-1/4 Full Bull 1912-0245 $289.95

4cm Laminated Joint Clean-up Bit

This bit smooths and cleans a glue joint in preparation for a V40 or T40 edge on laminated stone. Comes with two top bearings for 1/16 & 1/8 depth.

Sector/Master Connection

Breaker Wheel

Chip free center bearing Single or Double use Fast Cutting

1 bit for 20, 30 or 40mm!

4302-0184 $259.95 4308-0187 $249.95

B 3/8

z 1-1/2

E

B

F

E

V

For water feed angle grinders

On Page 19

Rigid Tornado Wheels

Size Grit Item # Price4 Coarse 1903-0323 $69.954 Medium 1903-0324 $69.954 Fine 1903-0325 $69.95

Desc Grit Item # Price0 36 1903-0326 $189.951 120 1903-0327 $189.952 220 1903-0328 $189.953 320 1903-0329 $189.95

4113-0034 $179.95


5/8-11 thread

5/8-11 thread

5/8-11 thread


Size Grit Item # Price4 Coarse 1903-0093 $49.955 Coarse 1903-0094 $69.957 Coarse 1903-0096 $89.95

33

GRINDING WHEELS - TORNADO / TURBO

Double layer grinding wheel for stone with long life!

Use wet only.

Multi-purpose grinding wheels. Can be used on edges and other grinding applications.

5-8/11 Female Magnetic Holder

Double layer for extended life and durability!

Disco Turbo Double Layer Cup Wheels

Turbo Double Layer Cup Wheels

Long Life! German engineered precise balance! Aggressive grinding!

Turbo T-Cup Diamond Wheels

Turbo Green Magnum Double Layer Cup Wheels

Aggressive Style! Super lightweight design and fast grinding.

Thick double layer for extended life and durability!

Max

4,0

00 R

PM

This wheel is designed for grinding inside radius applications such as: birdbaths, bowl holes, and other concave surfaces.

Premium diamond cup wheels with lightweight aluminum backer.

5/8-11 thread

4 Turbo Style and 4 DS Shaping Wheel

Size Grit Item # Price4 Fine 1903-0117 $49.954 Medium 1903-0116 $49.954 Coarse 1903-0114 $49.954 Extra Coarse 1903-0115 $49.95

Size Type Item # Price4 Medium Turbo 1906-0068 $143.604 Coarse Turbo 1906-0108 $153.914 Coarse DS Shape 1906-0140 $124.22

4 1903-0297 $89.95

Cyclone Flat Resin Shaping Wheels

Beveled edges for smooth grinding. Water channels prevent hydroplaning when grinding in water.

Perfectly balanced for smooth precision grinding.

5/8-11 thread

Grinding Wheels

Balanced to eliminate vibration and chipping when shaping. Aggressive design with thick turbo segments and diamonds.

Size Type Item # Price4 Fine 1903-0308 $59.954 Medium 1903-0307 $59.954 Coarse 1903-0306 $59.955 Coarse 1903-0309 $79.956 Coarse 1903-0310 $99.957 Coarse 1903-0311 $109.95

Turbo DS

Flat ResinShaping Wheels

Flat resin cup wheel with 12 diamond filled segments.

Balanced for smooth precision grinding.

5/8-11 thread

Size Type Item # Price4 Fine 1903-0304 $74.954 Medium 1903-0302 $74.954 Coarse 1903-0303 $74.95

Size Grit Item # Price2 Coarse 1903-0315 $49.95

Size Type Item # Price4 Fine 1903-0347 $64.954 Medium 1903-0346 $64.954 Coarse 1903-0345 $64.954 Extra Coarse 1903-0344 $64.95

5/8-11 thread

5/8-11 thread

5/8-11 thread

34

GRIN

DING

WHE

ELS

- TUR

BO /

SHAP

ING

/ RES

IN F

ILLED

4 Curved-Tapered Diamond Turbo Wheel - Aluminum

Grinding Wheels - Aluminum

2 Grinding Wheels

- Aluminum

4.5 and 7 Diamond Discs

Vacuum Brazed DiamondGrinding Wheels

5/8-11 Thread

Vacuum Brazed diamond discs resemble the infamous Zek discs from Italy in appearance and usage. However, the comparison ends with performance. These discs will far outlast hard silicone carbide discs and are just as aggressive.

For use on angle grinders Very cost effective One of the fastest way to cut and grind stone!

Size Grit Item # Price4 Coarse 1921-0004 $69.954 Medium 1921-0005 $69.955 Coarse 1921-0006 $79.955 Medium 1921-0007 $79.95

V1 CUTTER Vacuum Brazed Diamond Grinding Wheels

Size Grit Item # Price4 30/40 1903-0225 $89.954 50/60 1903-0226 $89.955 30/40 1903-0227 $109.955 50/60 1903-0228 $109.95

Extremely aggressive. Can cut like a blade and shape like a cup wheel easily with a few passes.

Size Grit Item # Price4.5 30 Grit 1905-0030 $39.954.5 100 Grit 1905-0031 $34.957 30 Grit 1905-0032 $74.95

5/8-11 Adaptor 4308-0027 $19.95

5/8-11 Thread

Flat Resin Shaping Wheels

Colored resin shaping wheels offer chip free grinding of stone edges.

Size Type Item # Price4 Fine 1903-0355 $59.954 Medium 1903-0354 $59.954 Coarse 1903-0353 $59.95

35

GRINDING WHEELS - BRAZED / ZEK STYLE / SPIRAKUT

Spirakut Discs

These discs have been the standard for grinding on marble, granite and stone in Italy and Europe for almost 30 years. Use for wet or dry grinding.

Size: 7 x 7/8 Size Item # Price#24 1905-0016 $8.95#36 1905-0018 $8.95#50 1905-0019 $8.95

#100 1905-0017 $8.95#120 1905-0011 $8.95

Size Item # Price7 4113-0029 $29.95

5/8 lock-nut 4113-0007 $5.95Wrench 4113-0004 $6.95

Bac

ker P

ad

Cyclone Cluster Wheels

For use on granite, concrete & steel. Designed for rapid removal of: Mesh backing, Epoxy coatings, Paint, All adhesive materials & Rust Patented diamond cluster design ensures a long lifespan.

Size Item # Price4 1903-0330 $64.955 1903-0331 $89.956 1903-0332 $109.957 1903-0333 $139.95

fAstest first step in Antiquing or leAthering stone. 5/8-11 thread

NEW

The fastest way to remove material after cutting out sink holes with a diamond blade, or to shape a radius on the outside edge.

Resin diamond fills in the area between the metal bond diamond. The result is fast stock removal for sink clean-up and radius work that is chip-free!!

Zero Tolerance Wheels

With top bearing and

5/8-11 thread. with center water

Brazed DiamondDrum Clean-Up Wheels

Resin Filled ZeroTolerance Wheels

5/8-11female thread

Size Item # Price1 x 1-5/8 1919-0209 $59.952 x 1-5/8 1919-0100 $89.953 x 1-5/8 1919-0101 $109.954 x 1-5/8 1919-0102 $149.95

Size Grit Item # Price2 x 2 #30 1919-0172 $119.952 x 2 #100 1919-0173 $119.953 x 2 #30 1919-0174 $159.953 x 2 #100 1919-0175 $159.95

Size Coarse Price1 x 1-5/8 1919-0210 $69.952 x 1-5/8 1919-0142 $99.953 x 1-5/8 1919-0143 $119.954 x 1-5/8 1919-0141 $159.95

Coarse Segmented Drumswith 5/8 threaded connection

with center water

with center water

Ghines Connection1-1/2 x 2 4313-0129 $179.95 4313-0169 $159.95

2 x 2 1919-0099 $299.95 --- ---

Description Item # Price Item # Price1 x 2 3/4 Wide 4309-0179 $139.95 4309-0180 $119.95

1 1/2 x 1 1/2 Wide 1919-0107 $119.95 --- ---3 x 1 1/2 Wide 1919-0112 $239.95 --- ---

3 x 2 Wide 1919-0113 $259.95 --- ---

2 x 2 4313-0124 $239.95 4313-0181 $239.953 x 2 4313-0127 $359.95 4313-0154 $339.95

5/8-11

5/8-11

5/8-11female thread

Stock Removal Wheels

Grit Item # Price#36 1903-0342 $119.95#60 1903-0343 $119.95

Removes stock chip-free Zero Vibration Recommended use: Oscillate wheel up and down to wear evenly and avoid grooves

5/8-11 thread

36

Electroplated Drum Wheelswithout center water and no bearings

Electroplated Drum Wheelswith bearings

30/40 Diamonds 50/60 Diamonds

30/40 Diamonds 50/60 Diamonds

30/40Diamonds

50/60 Diamonds

DRUM

WHE

ELS

- GRI

NDIN

G - R

IVAL

Description Item # Price2 dia. x 1 1/2 Wide Drum

*No Center WF* 1919-0120 $169.953 dia. x 1 1/2 Wide Drum

*No Center WF* 1919-0121 $259.953 dia. x 1 1/2 Wide Lightweight

Drum w/ center water 1919-0122 $299.953 dia. x 3 Wide Lightweight

Drum w/ center water 1919-0123 $349.95

Edge polishing for sink cut-outs.Recommended use: oscillate up and down for proper drum wear.

5/8-11 female thread with center water

Polishing Drum Wheels Grit 2 x 2 Price50 1919-0163 $21.95

100 1919-0164 $21.95200 1919-0165 $21.95400 1919-0166 $21.95800 1919-0167 $21.95

1500 1919-0168 $21.953000 1919-0169 $21.95Black 1919-0170 $27.95White 1919-0171 $27.95

Set: 50-3000 6001-0409 $153.65

Diamond grinding and polishing cylinders for professional edge processing wet application in connection with the GALESKI edge processing system Contour Cat 80. The drums use resin based with the oscillating head RS resulting in scratch-free and exact angular polishing of edges.

GaleskiOscillating Head

Oscillating Head Drum Wheel System

5/8

-11

fem

ale

thre

ad

Type Grit Item # PriceResin #200 1920-0021 $199.95Resin #400 1920-0022 $199.95Resin #800 1920-0023 $199.95Resin #1500 1920-0024 $199.95Resin #3000 1920-0025 $199.95

Final Buff Buff 1920-0026 $199.95

4108-0005 $699.95

Oscillating Drum Wheel System Type Grit Item # PriceResin #50 1920-0040 $89.95 Resin #100 1920-0041 $89.95 Resin #200 1920-0042 $89.95 Resin #400 1920-0043 $89.95 Resin #800 1920-0044 $89.95 Resin #1500 1920-0045 $89.95 Resin #3000 1920-0046 $89.95

Final Buff Buff 1920-0047 $89.95 Set: 50-3000 6001-0443 $629.65

Oscillating Head

4108-0024 $299.95

5/8

-11

fem

ale

thre

ad

Contour Cat KS-80

On Page 26

37

DRUM W

HEELS - POLISHING - RIVAL / GALESKI

NEW

38

DIAM

OND

BLAD

ES -

BRID

GE S

AW B

LADE

S

Yellow Sequence AppliedDiamond Blades

20mm Seg.

Size Arbor Item # Price14 50/60 mm 0508-0654 $219.9516 50/60 mm 0508-0655 $259.9518 50/60 mm 0508-0686 $289.95

25mm Seg.

Size Arbor Item # Price12 50/60 mm 0508-0688 $209.9514 50/60 mm 0508-0651 $239.9516 50/60 mm 0508-0652 $269.9518 50/60 mm 0508-0653 $309.95

Red Silent SandwichSegmented Blades

Sequence Applied Diamond Technology Provides the perfect balance between blade life and performance.

Diamond Placement ensures exposure and maximum cutting speed, thus giving the sawyer a perfect blend of speed and consistency.

The Rival Red is designed for lower horsepower saws. It is an economical blade giving a happy medium between blade life and cutting speed.

Wide space allows for

faster cutting!


Sequence AppliedDiamond Blades

The Rival Wave is our latest design featuring a slant turbo segment allowing fora fast clean cut!

Size Arbor Item # Price14 50/60 mm 0508-0786 $169.95 16 50/60 mm 0508-0787 $189.9518 50/60 mm 0508-0801 $259.95

20mm Seg.

Black Silent SandwichSegmented Blades

16 $189.95

26mm Seg.

Great Value!

FastCut!

ProvenPerformance!

Diamond Blades

Perfect for your Saw-Jet!

NEW

39

DIAMOND BLADES - BRIDGE / DEKTON SAW

BLADES

Diam. Arbor Item # Price12 50/60 mm 0508-0639 $234.9514 50/60 mm 0508-0648 $249.9516 50/60 mm 0508-0637 $299.9518 50/60 mm 0508-0636 $389.95

25mm Seg.

ZENESIS II Silent CorePatterned Segmented Blades

Remarkable life!Patented diamond placement technology.

ZENESIS Black2 Silent CorePatterned Segmented Blades




25mm Seg.25mm Seg.


FOR:

Bridge Saw Blade

Size Arbor Item # Price14 50/60 mm 0805-0112 $299.9516 50/60 mm 0805-0111 $349.95

10mm Seg.

Featuring a triangle cutout for a fast start and great finish - leaving no segment behind!

The most advanced diamondplacement technology available by Zenesis!

and other composite glass and porcelain based materials.

Next Generation Technology

40

DIAM

OND

BLAD

ES -

BRID

GE /

RAIL

SAW

BLA

DES



25mm Seg. 25mm Seg.

Size Arbor Item # Price14 50/60 mm 0508-0750 $139.95


10mm Seg. 10mm Seg.

XtraLife FLASH Diamond Blades KleenCut FLASH Diamond BladesA soft bond version of the FLASH XL,the KC is designed for low horsepower saws.

Patterned diamond technology and tight segment spacing teamed up with a great core make the FLASH XL a proven performer and a great choice for granite or quartz.

Designed for operation on lower HP saws. Premium segmented laser-welded diamond blades for cutting marble, natural stone and extremely hard bricks. Recommended for track saws.

Designed for operation on lower horsepower saws. It features a soft bond segment keeping it free cutting its entire lifespan. Soft bond works amazing on super hard stone.

Rail SeriesDiamond Blade

Great for Track Saws!

LowHorsepower


LowHorsepower

Low HorsepowerSilent CoreDiamond Blade

41

DIAMOND BLADES - BRIDGE SAW

BLADES - MARBLE / M

ILLING

Marble Blade

German

Quality

14 Milling Wheels

Size Arbor Item # Price14 60mm 4317-0010 $1,295.95

Milling Wheel Bushings

60mm to 50mm 99-131-0024 $34.95

Used to convert arbors of milling wheels.

German

Quality


60mm to 40mm 4308-0121 $34.95

Teflon Core

Ultimate in Precision!



18mm Seg.

8mm Seg.

Premium segmented blade perfect for cutting marble. Fast Cutting!

Wet use only, Silent Core

OZ1 Diamond Blade Fast FREE Cutting

"The Original"

Blue Impulse III Marble Blade

10mm Seg.


Fast cutting, cost-effective, long-long lasting, smooth cutting

NEW

Arbor Chart - 4 to 64 to 6

5/8- 20mm- 7/8- 4 Hole


5/8- - 7/8

Introducing the NEW cayenna Blade!

42

DIAM

OND

BLAD

ES -

SMAL

L DI

AMET

ER -

TURB

O

Designed for the professional fabricator & installer.The large segment design of this blade will cut more aggressively than most, while the tall diamond segment provides excellent life. Designed for wet or dry use.This blade cuts fast, lasts long, and is priced right!

Turbo Blades

Turbo Blades

Turbo Blades

S

E

General use for stone, tile & masonry. Thick segment, 8mm tall wide segment design.

One of our best selling blades! High diamond concentration providing clean fast cutting performance.

Size Item # Price4.5 0508-0840 $18.955 0508-0841 $21.956 0508-0842 $26.95

7 0508-0843 $39.95

Size Item # Price4 0508-0834 $10.95

4.5 0508-0835 $11.955 0508-0836 $13.956 0508-0837 $16.95

7 0508-0838 $21.95

Size Item # Price4.5 0508-0830 $8.955 0508-0831 $9.956 0508-0832 $13.95

7 0508-0833 $18.95

Economically priced and the best performing turbo blade in its class.

You wont get as much life or speed out of them as our Cyclone or Hurricane blade. But where cost is the main factor, they will get you by in a pinch.

Storm TurboDiamond Blades

Size Item # Price4.5 0508-0676 $13.955 0508-0677 $14.956 0508-0678 $24.95

Hurricane TurboDiamond Blades

Size Item # Price4 0508-0670 $22.95

4.5 0508-0671 $23.955 0508-0672 $24.956 0508-0673 $32.95

7 0508-0674 $44.958 0508-0675 $49.95

NEW

43

DIAMOND BLADES - SM

ALL DIAMETER - TURBO

New enhanced patterned diamond technology 2nd generation turbo blade! This blade is fast and doesnt chip.

We have taken the best of both and made the ULTIMATE turbo at the right prices!


5/8- 20mm- 7/8- 4 Hole


5/8- - 7/8

P Turbo Blades

Size Item # Price4.5 0508-0825 $27.955 0508-0826 $32.956 0508-0827 $42.95

7 0508-0828 $59.95

Engineered to be the fastest cutting turbo blade in the industry.

Premium high performing blade with high diamond consistency. Offering fineand clean cuts. A highlydemanded blade!

Turbo Blades

Size Item # Price4.5 0508-0780 $24.955 0508-0769 $25.956 0508-0770 $35.95

7 0508-0781 $54.958 0508-0782 $59.95

A Premium blade fast becoming the new industry Standard. Providingfast clean cuts!Great life & speed!

SP

SP

Cyclone TurboDiamond Blades

Size Item # Price4 0508-0666 $23.95

4.5 0508-0667 $26.955 0508-0619 $29.956 0508-0668 $39.95

7 0508-0669 $57.958 0508-0609 $64.95

Diamond Turbo Blades

Zenesis PatternedDiamond Turbo Blades

Size Item # Price4.5 0508-0759 $19.955 0508-0760 $22.956 0508-0761 $32.95

7 0508-0762 $42.95

Size Item # Price4 0508-0815 $12.95

4.5 0508-0816 $14.955 0508-0817 $17.956 0508-0818 $19.95

7 0508-0819 $29.958 0508-0820 $34.9510 0508-0821 $69.9512 0508-0822 $79.9514 0508-0823 $99.95

neWimprov

ed

performAnc

e

Noise reducing core by over 10 decibels Stable vibration free cutting Extended life Cut over 1000 feet when using water.

Cyclone S TurboDiamond Blades

Size Item # Price5 0508-0966 $34.956 0508-0967 $44.95

7 0508-0968 $63.958 0508-0969 $71.95

Silent C

ore

Turbo

This blade is designed for fast cutting performance and extruded diamond sides to prevent binding in the cut.

Use wet or dry

Size Item # Price4 0508-0909 $24.95

4.5 0508-0910 $29.955 0508-0911 $34.956 0508-0912 $39.95

7 0508-0913 $44.9510 0508-0914 $89.9512 0508-0916 $137.9514 0508-0915 $159.95


5/8- 20mm- 7/8- 4 Hole


5/8- - 7/8

44

DIAM

OND

BLAD

ES -

SPEC

IALT

Y / T

URBO

Turbo BladesT-REX Diamond Blades

S A M U R A I DIAMOND BLADES

Great for curve cutting machines. Also the ideal blade for use with an angle grinder for cutting curved areas and light grinding. The T-segments protrude from both sides of the blade which helps prevent it from binding in the cut.

Laser welded Segments protrude out from the sides and some are longer then others. Which prevents binding, increases the cutting speed and provides a smooth cut.

Tornado Turbo Blades

Supreme performance in fast cutting of hard materials like stone and hard pavers. Extremely smooth, clean finish to the cut.

Use wet or dry

Size Item # Price4 0508-0645 $24.95

4.5 0508-0646 $26.95 5 0508-0643 $29.95

7 0508-0647 $44.95 8 0508-0687 $49.959 0508-0644 $79.95

10 0508-0980 $89.9512 0508-0696 $139.9514 0508-0697 $159.95

Use wet or dry

Use wet or dry

10-14 Arbor1 - 7/8 - 5/8

12-14 Arbor1- 20mm

Combo Turbo Blades

Revolutionary Blade/Grinding WheelRock Solid Core will not flex

Includes a FREE 4-Hole Adapter!5/8-11 Female Thread ($20.00 Value)

Cut & Grindwith the same whe

el!

9-10 Arbor1 - 7/8 - 5/8

Size Item # Price5 0508-0317 $44.95

7 0508-0318 $54.95

Size Item # Price4.5 0508-0097 $24.955 0508-0100 $29.956 0508-0418 $34.95

7 0508-0102 $39.958 0508-0104 $49.95

Size Item # Price4 0511-0058 $49.955 0511-0059 $59.956 0511-0060 $79.95

The dimple style rim decreases heat caused by friction. Cooler rim tem-peratures increase life & speed of cut. For fast and chip free cutting.

10 Arbor1 - 7/8 - 5/8

Cyclone Porcelain/Tile Turbo Blades

Size Item # Price4 0508-0906 $21.95

4.5 0508-0907 $24.955 0508-0908 $27.95

10 0508-0905 $55.95

45

DIAMOND BLADES - ALPHA TURBO

Knock-Out Blade Katana Blades

Use wet or dry Use wet only

Trim MasterNumero Uno Diamond Tile Blades

Use wet only

Use wet or dry

This blade is the ultimate dry cutting diamond blade for the professional tile contractor. Engineered to be the one blade you will need for cutting all materials, such as porcelain, granite, marble, engineered stone and glazed ceramic tile.

Advanced technology - cut through 1 material very fast with minimal chipping. First in the industry - first blade designed specifically for use on slower than standard RPM saws. Good cost performance - has a cutting life of more than 800 linear feet through 1 granite.

Alpha introduces the Trim Master, the first dry cutting blade designed for Sliding Miter Saws. This new dry cutting diamond blade is specifically designed to be used at high RPMs. This specialty blade is ideally suited for baseboard, back splash, end cap, mirror frames and any other molding applications.

Designed specifically to cut granite, marble and porcelain quickly and efficiently. Advanced style rim reduces the risk of chipping and breaking while providing accurate and safe cuts. Fits most tub and tile saws.

Professional Plus & Quad Turbo Blades

Considered to be among the finest diamond blades available in the stone industry. The Quad blades are drilled for the flush mount adapters. The Plus blades are not.

Use wet or dry

Size Arbor Item # Price8 - 5/8 0511-0008 $101.61

Size Arbor Item # Price4.5 7/8 - 20mm 0508-0438 $46.165 7/8 0508-0439 $52.49

10 5/8 0508-0592 $135.5712 1, 5/8 0508-0783 $188.53

Size Arbor RPM Item # Price8 5/8 5,000 0510-0002 $80.68

10 5/8 3,450 0510-0003 $108.83

QUAD Blades Size Arbor Item # Price4 20mm 0508-0002 $53.455 20mm 0508-0009 $67.266 20mm 0508-0012 $79.447 20mm 0508-0014 $84.728 20mm 0508-0018 $103.15

PLUS Blades Size Arbor Item # Price Size Arbor Item # Price4 20mm - 5/8 0508-0001 $51.32 7 - 5/8 0508-0013 $81.79

4.5 7/8 - 20mm - 5/8 0508-0005 $56.39 8 - 5/8 0508-0017 $98.885 7/8 - 20mm - 5/8 0508-0008 $64.99 10 5/8 0508-0024 $172.056 - 5/8- 1/2 0508-0011 $77.02 12 1 - 20mm 0508-0027 $216.17


5/8- 20mm- 7/8- 4 Hole


5/8- - 7/8

46

DIAM

OND

BLAD

ES -

ELEC

TROP

LATE

D / C

ONTI

NUOU

S RI

M

Designed to cut softer stone materials such as softer marbles, travertines, soapstones and alabaster without chipping or cracking.

Comes with diamond side protection for extra clean cuts. New longer slot design increases cutting speed for super fast cuts.

Use wet or dry

Premium marble blade with side protection to increase cutting speed and life. Perfect for softer stones!

Libero Diamond Marble Blades

Electroplated Marble Blades

Super Cyclone Electroplated Diamond Blades

Size Item # Price4.5 0510-0141 $34.955 0510-0142 $39.956 0510-0143 $49.95

7 0510-0144 $59.95

Size Arbor Item # Price4 20mm, 5/8 0508-0003 $63.14

4.5 7/8, 20mm 0508-0007 $70.435 7/8 0508-0524 $84.857 , 5/8 0508-0016 $115.05

Size Item # Price4 0508-0679 $33.95

4.5 0508-0680 $36.955 0508-0681 $39.956 0508-0682 $58.95

7 0508-0683 $63.95

Use wet only

Use wet only

Continuous Rim Tile Blades

Diamond Continuous Rim Porcelain/Stone Blades

Cyclone ContinuousRim Diamond Blades

Supreme design. Made to cut all types of stone and tile.

Designed to cut all types of stone and porcelain tiles.

Dry/Wet CuttingFast Cutting!

10-14 Arbor1-7/8-5/8 10-14 Arbor

1-7/8-5/8

NEW

Size Item # Price4 0510-0103 $17.95

4.5 0510-0104 $19.955 0510-0105 $21.956 0510-0106 $24.95

7 0510-0107 $29.9510 0510-0109 $49.95

Size Item # Price4.5 0510-0095 $19.955 0510-0096 $24.956 0510-0097 $29.95

7 0510-0098 $34.958 0510-0099 $39.9510 0510-0100 $49.9512 0510-0101 $79.9514 0510-0102 $109.95

Size Item # Price4 0508-0700 $20.95

4.5 0508-0701 $22.955 0508-0702 $25.956 0508-0758 $31.95

7 0508-0703 $40.958 0508-0704 $42.9510 0508-0705 $51.9512 0508-0706 $74.9514 0508-0771 $110.95

Continuous rim blade with cooling slots for useon granite and porcelain tile.

Size Arbor Item # Price5 7/8 - 5/8 0511-0056 $89.95

Contour Diamond Blade

Contour Diamond Blades

Size Type Arbor Item # Price5 Cyclone Granite 7/8 - 5/8 + 20.2mm 0508-0663 $104.955 Hurricane Granite 7/8 - 5/8 + 20.2mm 0508-0664 $79.955 Cyclone Marble 7/8 - 5/8 + 20.2mm 0508-0665 $99.95Fastest way to make circular cut-outs. The turbo-rim and two-sided dropped segments make the job faster than with any conventional diamond blade.



Use Wet Only

Granite Contour Blades

Size Arbor Item # Price5 7/8 0508-0021 $148.42

These blades are used to cut out round and oval sink holes in countertops. This new design has segments which extend lower and protrude outward to prevent binding. Available in bonds to cut granite, engineered stone, marble, & porcelain.

Great blade for sink hole cut outs. Enhanced segments allow for faster cutting.

Easy for cutting out sink holes. 5 has diamond on both sides of core. 7 has diamond on outside of core.

Size Arbor Item # Price5 7/8-20mm-5/8 0511-0029 $59.957 7/8-20mm-5/8 0508-0320 $49.95

Adapters

On Page 27

48

DIAM

OND

BLAD

ES -

CONT

OUR

/ ROD

DING

/ JIG

Tuck Point Rodding Diamond Blades

These blades are suited for all categories of granite. The thick segments provide the perfect size to accommodate the stainless steel and plastic rods.

Hot-Rod Diamond Blades

Use wet only

Electroplated Jig Saw Blades

0509-0050 Universal Connection 2-3/40509-0051 Bosch Connection 3-3/8

Jig Saw Blades

Use wet only

Turbo Style Rodding Blades

Use wet onlyProvides a faster smoother chip free cut!

NEW

Size Thick Arbor Item # Price3 1/4 7/8-20mm-5/8 0508-0615 $49.954 1/4 7/8-20mm-5/8 0508-0419 $49.955 1/4 7/8-20mm-5/8 0508-0421 $59.957 1/4 7/8-20mm-5/8 0508-0628 $99.95

Size Thick Type Arbor Item # Price3 1/8 Granite 20mm 0511-0033 $94.963 1/4 Granite 20mm 0511-0001 $94.96

Size Thick Arbor Item # Price3 1/8 7/8-20mm-5/8 0508-0707 $49.954 1/8 7/8-20mm-5/8 0508-0851 $59.95

Item # Price0509-0050 $19.950509-0051 $19.95Type Item # Price

EH2 0509-0026 $69.95B3 0509-0025 $89.95G3 0509-0023 $79.95

Size Thick Arbor Item # Price4.5 3/16 7/8-20mm-5/8 0508-0964 $42.955 3/16 7/8-20mm-5/8 0508-0965 $52.95

49

DIAMOND CORE BITS - W

ET / DRY

Dry Side Plated Core Bits T-Type

Durable and Strong Segments Side Plated allowing faster cuts and coring. Can be used dry or wet, use wet for longer bit use. 5/8-11 Threaded 6,500 Max RPM

Dry/Wet Turbo Core Bits with Side Platting

Diamond Core Bits

Vacuum Stripe Dry/Wet Diamond Core Bits

1-5/8 1105-0210 $72.951-3/4 1105-0211 $77.95

2 1105-0212 $79.952-1/4 1105-0240 $89.952-1/2 1105-0241 $99.95

3 1105-0242 $109.953-1/2 1105-

2014 granite city tool fabrication catalog

Documents