2014 mit catalog - moving image tech

• TheunitmovestheXLunitfromoneextremetotheotherinunder10seconds.

• Quietoperation,typicallycan’tbeheardovertheprojectorandserverfans.

• Thesystemincludesa‘soft-stop’featureatbothendsoftravel.

• Includesatimeoutfeaturesoitwon’tcontinuetodriveifanobjectisblockingthepath.

• LEDsindicatewhentheunithasreachedeitherendoftravel.

Control:

Features:

Thecontrolofthesystemisbylow-voltagecontactclosures.Thesecanbefromanautomationsystem,orfromaprojectorwithmacro-drivenGPDIoutputs.Thesamemacrosthatselect2Dand3DmodesontheprojectormayalsobeprogrammedtoactivateGPDIoutputsdrivingtheXLunitinoroutoftheopticalpath.Aterminalblockisprovidedformakingconnections.

Asmallcontrolpanelisprovidedontheoperatorsideoftheunitwithmanualpushbuttonstoselectthedesiredpositionoftheunit,overridingthelastcommandreceivedfromtheGPDIinputs.

TheMovingImageTechnologiesXLMoverplatformsupportstheXL3DprojectionsystemfromReal-D.Thesystemmounts tothe frontof thepedestalsupporting the projector. Alternatively it maybe mounted to the front booth wall below theprojection port. It utilizes polished shafts withlinear bearings so the movable element slidesbackandfortheasily.AgearmotorpositionstheXL system in front of the lens or to the side,controlled remotely. Manual pushbuttons areprovidedformanualoverride.

XL Mover

2

Dimensions & Outline:

* Due to on-going development, features and specifications subject to change without notice.

Regulatory:Allelementsofthesystemarelow-voltage,exceptforanin-line,recognizedDCpowersupply.Regulatoryapprovalisnotbeingsoughtforthesystem.

Part Numbers: A000360-001StandardXLMoverSystem,30.5”OAL,12”carriagetravelA000360-002ExtendedXLMoverSystem,42”OAL,24”carriagetravelA000360-101XLMoversystemwithreversed2D/3Dendsfunction(forCDS).Includesmountingbrackets.

Mechanical:Dimensions: 28.0x17.75x~12”deep Weight: TBD

[email protected] | 1-866-mit-8501 | movingimagetech.com 3

Special Component Part Options:

Systemmountingbracket.AdaptstheXLMovermountingholesto19”rackmountingpattern(2earequired):

C001413-0012.5”long(standard)C001413-0024.25”long(extended)C001413-0038.25”long(extralong,supportlegstofloorrecommended)

XLcarriagetop,bracketwithslotsformountingXLcore:

C001422-00211”Lx5.5”H(Standard)C001422-0038”Lx4.5”H(Compact)C001422-0049”Lx1”H(Flat)C001458-001MountingAdapterbracket,allowsslidingtheXLMoverleftorrightupto5”fromcenter

The Moving Image Technologies XLS Mover

platform supports the XLS 3D projection

system from Real-D for Sony projectors.

The system mounts to the front of the lens

utilizing a light weight design. Bearing

cams on an aluminum tracks allow a

gearmotor to positions the XLS system in

front of the lens or to the side. System is

controlled through remote automation or

manually by override push buttons.

XLS Mover

Features:• The unit moves the XLS unit from one extreme to the other in under 5 seconds.

• Quiet operation, typically can’t be heard over the projector and server fans.

• Includes a timeout feature so it won’t continue to drive if an object is blocking the path.

• LEDs indicate when the unit has reached either end of travel

4


Power Requirements:The system requires a dedicated 120VAC, 15A circuit for the hoist (in addition to the power required for the projector).

•Automatic safety interlock

•Key switch to raise and lower the unit included

•Various projection heights may be selected at

installation.

•All parts made from rugged formed and welded

steel

•Projector enclosure has removable side panels

for service

Part Number: A000410-001 Lift System, 12’-0” track height, 141” max. enclosure ht.A000410-002 Lift System, 13’-6” track height, 159” max. enclosure ht.

5

[email protected] | 1-866-mit-8501 | movingimagetech.com

Control:The control of the system is by low-voltage contact closures. These can be from an automation

system, or from a projector with macro-driven GPDI outputs. The same macros that select 2D and

3D modes on theprojector may also be programmed to activate GPDI outputs driving the XLS unit

in or out of the optical path. A terminal block is provided for making connections.

A small control panel is provided on the operator side of the unit with manual pushbuttons to

select thedesired position of the unit, overriding the last command received from the GPDI

inputs.

iMAGE LIFT

Features:

Site Requirements:The system requires a load-bearing wall at the rear of the auditorium. Alternatively the wall must be reinforced with additional steel or heavy gage studs (details available on request).

The Moving Image Lift mounts to the rear wall

of an auditorium. It consists of a quiet projector

enclosure ‘pod’ riding on a vertical track. The

system raises the projector into position where

it will have a clear sightline to the screen

for projection, and lowers it to a convenient

height for service. The product facilitates a

“boothless” cinema design.

•24” sq. projection port included as standard with water-clear, A/R coated glass

• Interface plate at the top of the system facilitates electrical and HVAC connections

• Includes 8RU of standard 19” rack mounting under the projector.

Features:

6


7


MICROPOD

Features:

HUSH RACKThe MOVING iMAGE TECHNOLOGIES Hush Rack is designed for

all your video and audio rack mounting needs. The Hush Rack

provides a level of security uncommon in typical equipment

racks. A solid, welded design is ideal for mounting equipment

behind the screen where audio pressure would rattle a

typical sound rack. High volume, low-pressure ventilation

is filtered to keep your amps breathing cleanly with minimal

service required in the dirtiest of environments. Coupled

with the MOVING iMAGE TECHNOLOGIES IS Series of power

filtering and remote switching products, the MOVING iMAGE

TECHNOLOGIES Hush Rack can be remotely powered up/down

to support efficient energy management and equipment

protection. The MOVING iMAGE TECHNOLOGIES hush rack

is the latest product in our line to support alternative

auditorium configurations including boothless cinema.

• 40 RU of secure rack space

• Welded steel powder-coated construction

• 5 point lockable steel security doors

• Air filters in front and back doors

• High-volume, low pressure fans for quiet ventilation.

• Cable lacing channels for ease of cable dressing & management

• Bonded grounding post

• Bare rack rails for secure grounding of devices

• Adjustable rack rails front and rear for flexible mounting

• Support channel at the bottom of rack for heavy amps or UPS

• Work light for ease of service

• Laser cut conduit knock-outs for flexibility of service entry/exit

• Available integration with all of MiT power filtering, distribution products

• Rack integration services available to deliver a fully wired and tested product to your specifications.

• Sealed enclosure for quiet operation

• 8” Supply and Exhaust fittings on the top facilitate HVAC connections

• 9” square water white A/R coated glass port, gasketing, and trim included as standard

• Optional sound damping foam composite panels may be factory-installed for an even

lower noise profile

• Dimensions: 42.0 x 34.5 x 21” high• Weight: 130lbs (measured)(not including foam)

Mechanical:

“The newest addition to Moving iMage Technologies suite of products to support boothless theater designs is the “Micropod”. Simple yet attractive in appearance, it fits into any décor to share the auditorium with the audience. The Micropod is designed specifically for the NC900 & NC1100 projectors (or equivalent small footprint projectors).

The design uses a rugged 10GA steel frame combined with lightweight aluminum covers for the optimum combination of ruggedness and light weight. The Micropod is intended to be suspended from a ceiling

Important note: As the installation of this unit is outside the control of MiT, we disclaim all liability for damage to equipment or personal injury resulting from improper installation. Using lifting-rated hardware is essential! MiT recommends always consulting a structural engineer for any installation of equipment over an audience.

or overhead structure, 3/4” female threaded sockets are provided at the four corners of the frame for

attaching hooks, cables, or other suspension fittings. It’s also compatible with MiT’s Lift system, so it may

be lowered to a convenient height for servicing the projector (see separate specifications for lift).

The MOVING iMAGE TECHNOLOGIES S-1 Digital Cinema Pedestal is a base intended to support D-Cinema projectors and related equipment securely and with ease of alignment and service. The S-1 accommodates DLP projectors from all manufacturers and is sturdy enough to support stackable projectors. The base offers 14RU (24.5”) of standard 19” rack space and can be prewired with an optional PDU for simplified power distribution. The top of the unit incorporates a tilting platform that can be adjusted to provide up to a 10-degree down angle. The S-1 can accommodate all D-Cinema Servers as well as the full line of MiT accessories. This includes IMC automations, M-Series Dimmers and IS-30 Spike Arrestors all of which can be pre wired in our factory to your custom specifications. (See separate specifications for details)

S1 Pedestal

• Rugged all-welded welded steel construction, durable powder coat finish.

• Tilt table allows 10-degrees down angle with safety latches.

• Conduit knockouts on the front side for routing power and signals.

• Feet-capturing devices to lock the projector to the base, and the base to the floor.

• 14U of Standard 19” rack space. 24.5” deep.

• Integration and prewire available to your custom requirements.

Features:

• NEC - NC1600, NC2500, NC1200, NC2000, NC3200.

• Barco - DP90, DP3000, DP1200, DP1500, DP2000, DP2K-12C, DP2K-15C, DP2K-20C,

• Christie - CP2000M, CP2000-ZX, CP2220, CP2210, CP2000-XB, CP2230.

Projectors Supported:

8

Block Diagram:


Accessories & Options• Large Projector Adapter Plate• PDU Power Distribution Unit• IMC-2 or IMC-3j Automation• S-1 Riser and Cart for 60” high port windows• Docking Pin Kit for S-1 Riser and Cart• IS-30 Spike/Surge Arrestor• M-Series Dimmer• Integration and Prewire• Hold down clamps (seismic)

Mechanical:• Dimensions 34.0 x 22.0 x 29.1 in. high [864 x 559 x 739mm]• Weight 200lbs [90 kg]


S2 Pedestal

Features:

The MOVING iMAGE TECHNOLOGIES S2 Pedestal is the most widely used pedestal in D Cinema today. It has been designed by MiT engineers for ergonomics and functionality, while at the same time being attractive to the eye. It consists of a rugged, welded enclosure made from 14 Ga steel. It’s designed to support projectors up to 400 lbs. Customers have the choice of louvered panels or screened doors for the unused rack mounting areas. The S2 can accommodate all D-Cinema Servers as well as the full line of MiT accessories. This includes IMC automations, M-Series Dimmers and IS-30 Spike Arrestors all of which can be pre wired in our factory to your custom specifications. (See separate specifications for details)

• Supports small and large DLP projectors from all major OEMs

• 14 U rack space available from 3 sides for flexible configuration

• Internal work light built-in to ease service

• Long leveling feet allow tilting to 10 degrees

• Conduit knockouts on the front side for routing power in and out

• May be track mounted

• Tilt block available for greater tilt

• Hold-down clamps secure projector feet

• For use in new construction or retrofits

10

Block Diagram:


Options:

• Power Distribution Unit• International Voltages Available• IMC Series Automation Systems• Is-30 Spike/Surge Protection Unit• M-Series Dimmer

• Pre Assembly And Wiring• Pre Configuration And Addressing Of

Network• Seismic Foot Clamps

• Dimensions: 42.0 x 30.5 x 31” high• Weight: 200lbs

• A000310-001 Standard Pedestal• A000176-00x Power Distribution unit (N. America and International versions)• A000282-00x IMC-3j Automation system, 2RU tray• A000290-00x IS-30 Spike and surge arrestor (120/220V and 230/380V versions)• C003184-001 Tilt Riser Block• C003199-001 Adapter, NEC projector mount (2 req’d)• PA00001-00x Dimmer (2 channel and 4 channel versions)


Mechanical:

Part Numbers:

11

The MOVING iMAGE TECHNOLOGIES S3 Pedestal was made with special consideration for consolidation of the all D Cinema components. It has been designed by MiT engineers for functionality and optimization, without sacrafice. It consists of our standard rugged, welded enclosure made from 14 Ga steel & is designed to support projectors up to 400 lbs. Customers have the choice of louvered panels or screened doors for the unused rack mounting areas. The S3 can accommodate all D-Cinema Servers as well as audio components with enough rack space for a full line of MiT accessories. This includes IMC automations, M-Series Dimmers and IS-30 Spike Arrestors all of which can be delivered integrated from the MiT factory. (See separate specifications for details)

S3 Pedestal (30 inch)


• 28 RU of space available from 3 sides for flexible configuration to accomodate more equipment




• Hold-down clamps capture projector feet




Features:

12

Block Diagram:


Options:

• Power Distribution Unit• International Voltages Available• IMC Series Automation Systems• IS-30 Spike/Surge Protection Unit• M-Series Dimmer

• Pre Assembly and Wiring• Pre-Configuration and Addressing of




Part Numbers:

Mechanical:

13


The MOVING iMAGE TECHNOLOGIES S3 is a Low Profile Pedestal designed for screens with unique space limitations and low port windows. It has been designed by MiT engineers to accomodate crucial D CInema equipment, with the same eye appeal as the taller S Series Bases. It consists of a rugged, welded enclosure made from 14 Ga steel. It’s designed to support projectors up to 400 lbs. Customers have the choice of louvered panels or screened doors for the unused rack mounting areas. The S3 can accommodate all D-Cinema Servers as well as a select number of MiT accessories, depending on placement and configuration. This includes IMC automations, IS-30 Spike Arrestors all of which can be pre wired in our factory to your custom specifications. (See separate specifications for details)

S3 Low Profile Pedestal


• 16 RU of space available from 2 sides for flexible configuration to accomodate crucial equipment.








Features:

14

Block Diagram:


Options:

• Power Distribution Unit• International Voltages Available• IMC Series Automation Systems• Is-30 Spike/Surge Protection Unit• M-Series Dimmer



Mechanical:• Dimensions: 42.0 x 30.5 x 13” high• Weight: 200lbs

Part Numbers:• A000310-001 Standard Pedestal• A000176-00x Power Distribution unit (N. America and International versions)• A000282-00x IMC-3j Automation system, 2RU tray• A000290-00x IS-30 Spike and surge arrestor (120/220V and 230/380V versions)• C003184-001 Tilt Riser Block• C003199-001 Adapter, NEC projector mount (2 req’d)• PA00001-00x Dimmer (2 channel and 4 channel versions)

15


The MOVING iMAGE TECHNOLOGIES Dual Projector Stacking System provides a robust support frame to

add a second projector above our Series 3 low-profile pedestal. It includes an exhaust adapter duct for

the lower projector to facilitate HVAC hookup. The stacker frame is fabricated from rugged 10 GA steel

and designed to support projectors up to 400 lb. The Dual Projector Stacking System allows on center

targeting for ease of convergence in your Premium Large Format auditorium. The system can accommodate

various optional components such as the XL-Mover (2), IMC automation, IS-30 Spike Arrestor, IS-20 Power

Managers, or other products, all of which can be pre wired in our factory to your custom specifications.

(See separate specifications for the S3 Low Profile Pedestal).

Dual Projector Stacking System


• 16 RU of space available from 2 sides for flexible configuration to accomodate crucial equipment.



• Tilt blocks available for greater tilt





Features:

16

Block Diagram:


Options:




Mechanical:• Dimensions: 53.0 x 35.5 x 50” high• Weight: 80lbs (280lbs mounted to S3 Low Profile Base)

Part Numbers:• A000310-001 Standard Pedestal• A000176-00x Power Distribution unit (N. America and International versions)• A000282-00x IMC-3j Automation system, 2RU tray• A000290-00x IS-30 Spike and surge arrestor (120/220V and 230/380V versions)• C003184-001 Tilt Riser Block• C003199-001 Adapter, NEC projector mount (2 req’d)• PA00001-00x Dimmer (2 channel and 4 channel versions)

17


The MOVING iMAGE TECHNOLOGIES S4 Pedestal was made with special consideration for consolidation of the all D Cinema components. It has been designed by MiT engineers for functionality and optimization, without sacrafice. It consists of our standard rugged, welded enclosure made from 14 Ga steel & is designed to support projectors up to 400 lbs. Customers have the choice of louvered panels or screened doors for the unused rack mounting areas. The S4 can accommodate all D-Cinema Servers as well as audio components with enough rack space for a full line of MiT accessories. This includes IMC automations, M-Series Dimmers and IS-30 Spike Arrestors all of which can be delivered integrated from the MiT factory. (See separate specifications for details)

S4 Pedestal (DE)


• 21 RU of space available from 2 sides for flexible configuration to accomodate more equipment







• May be mounted on track or casters

Features:

18

Block Diagram:


Options:






Part Numbers:

Mechanical:

19


The MOVING iMAGE TECHNOLOGIES IMC-2 platform is a multipurpose interface device for use in the cinema. It can provide digital communication capability to film-based systems, assist in integrating onscreen advertising or pre-feature entertainment systems, and provides various interface functions in the implementation of D-Cinema. In conjunction with a D-Cinema server, it can serve as a complete automation for a typical D-Cinema system.

In a typical installation, the IMC-2 receives cue commands from a server via RS-232 (or ethernet interface for the IMC2e) and controls the projector and all auditorium functions.

The unit comes standard with a lacing bar to facilitate and support the wiring at the rear. Also the rack mounting ears may be removed if the unit is desired to mount elsewhere, for example to a wall.

IMC-2 (IMC-2e) Automation Controller

• 12 digital inputs (7 cue or event inputs, plus 5 dedicated inputs for Flat, Scope, Dimmer Up, Dimmer Down, and Emergency Stop

• 16 relay-driven outputs, each with indicator LED

• 2 Serial COM ports (IMC-2)

• 1 ethernet port and 1 serial COM port (IMC-2e)

• Customizable program for each intended application

• Gangable to increase I/O capability

• Durable powder coat finish

• Conduit knockouts top and bottom

• 1U rack-mountable or wall-mountable

• Pluggable terminal blocks for all connections

Features:

20



Electrical Requirements:12VDC @ 500 mA (a wall mounted power supply is included with the unit)

Part Numbers: Accessories & Options:A000202-001 Assy, IMC-2 Controller A000202-003 Assy, IMC-2e Controller PA00016-012 Power Supply, 12V, wall mount

Mechanical:Dimensions: 19.0 x 8.75 x 1.7 in. [483 x 222 x 44mm]Weight: 6lbs [2.7 kg]

21


The MOVING iMAGE TECHNOLOGIES IMC-3j platform is a standalone automation system for digital cinema applications. It interfaces with the latest generation of digital projectors, servers, audio processors, and also supports pre-feature entertainment systems.

In a typical installation the IMC-3j receives cue commands from a d-cinema server and controls the projector and audio processor via the Local Area Network (Ethernet) port. Digital inputs and outputs interface with legacy equipment as well as curtains, masking, lighting, and other auditorium functions.

• 8 digital (GPIO) inputs

• 8 relay-driven outputs

• 5 outputs rated for 1Amp, 30V

• Masking outputs rated for 5 Amps, 120V

• Preshow projector output rated for 10 Amps, 120V

• 2 Serial COM ports

• Ethernet Support

• Terminal blocks for all connections

• FireAlarminputisconfigurableforcommonfirepanelvoltagesandcontrolmethods

• Customizable programs for most applications

• Manual controls on the front panel for masking,dimmer,preshow,andfirealarmclear

• Expansion modules available to increase I/O capability

• Open-frame design provides easy access

• Includes remote termination board

IMC-3j Automation

Features:

22




Part Numbers: Accessories & Options:A000282-004 Assy, IMC-3j ControllerPA00016-012 Power Supply, 12V, wall mount


23


The MOVING iMAGE TECHNOLOGIES IMC-4j platform is a standalone automation system for digital cinema applications. It interfaces with the latest generation of digital projectors, servers, audio processors, and also supports pre-feature entertainment systems.

In a typical installation the IMC-4j receives cue commands from a d-cinema server and controls the projector and audio processor via the Local Area Network (Ethernet) port. Digital inputs and outputs interface with legacy equipment as well as curtains, masking, lighting, and other auditorium functions.

• 8 digital (GPIO) inputs

• 8 relay-driven outputs

• 5 outputs rated for 1Amp, 30V

• Masking outputs rated for 5 Amps, 120V

• Preshow projector output rated for 10 Amps, 120V

• Inputs: PreShow Start (with buttons on the front panel for Start and End), PreShow End, Curtain/Light show control and Projector Macro Preload

• Outputs: Separate House and Stage Dimmer (with control buttons on front panel) Low Voltage Control, Curtain Open and Close (with control buttons on front panel) High Voltage Control, Door Magnet Open and Close (High Voltage), Logic Output (programmable) and End Of Day Lamp Kill

• 2 Serial COM ports

• Ethernet Support

• Terminal blocks for all connections

• FireAlarminputisconfigurableforcommonfirepanelvoltagesandcontrolmethods

• Customizable programs for most applications

• Manual controls on the front panel for masking,dimmer,preshow,andfirealarmclear

• Expansion modules available to increase I/O capability

• Open-frame design provides easy access

• Includes remote termination board

IMC-4j Automation

Features:

24




Part Numbers: Accessories & Options:A000282-004 Assy, IMC-3j ControllerPA00016-012 Power Supply, 12V, wall mount


25


The MOVING IMAGE TECHNOLOGIES IS-20 Series Power Manager offer AC distribution, sequential on/off control, and surge suppression standard on all models. It has been designed specifically for racks with multiple pieces of equipment that are desired to be powered on and off on a daily basis. It is ideal for audio amplifier racks. It includes LEDs that indicate the status of all AC phases. The IS-20 accepts six 20-Amp AC feeds, routes them through the switching elements, an EMI filter stage, and a surge protection stage, then to receptacles on the rear panel.

On the standard IS-20 model, power up and power down sequences are controlled via Ethernet or low voltage, dry contact closure.

The newly introduced IS-20d offers expanded digital functionality by giving discrete controls to each circuit, programmable via a simple GUI (Graphical User Interface).

The IS-20 & IS-20d Power Manager should be the heart of your energy management plan. Powering systems up and down just in time for their use saves on wasteful energy consumption during system idle time.

IS-20 & IS-20d Power Manager

• Front Leds Indicate Power Status Of All Circuits

• Current Rating Of 20 Amps Per Phase

• For Use In New Construction Or Retrofits

• Terminal Block Connections

• 2 U Rack Mountable

• Ethernet Or Dry Contact Control

• Individual Circuit Breakers

• Pre-Programmed Power-Up And Power-Down Sequence.

• Individual Circuit On/Off Control

• Individual Circuit Power Filtering

• Regulatory-Approval (Pending)

Features:

26


Electrical Specifications:

• AC Requirements: 120VAC x 6 (20A breaker max.)• Certified to: UL 1449, IEC 61643-1, EN 61643-11/21, Class 3 / Category A• Surge suppression (on applicable models):

• Threshold voltage: 2kv• Peak Surge current: 5000A• Typical Life: 300 strikes (@500A surge)

Options• 220 Volt Configuration

Mechanical:Dimensions: 19.0 x 3.5 (2U) x 9” (preliminary)

Hours idle (12am - 11am) 11kWh used / rack idle / day 7.4kwh used / rack idle / year 2698.08Typical kwh cost $0.15Total savings / year / screen $404.71

Processor 100Monitor 32Amps (5 ea) 540Total / Rack Watts at idle 672

Typical Sound Rack Power Consumption at Idle (Watts)

27


The MOVING iMAGE TECHNOLOGIES IS-30 is an AC power spike arrestor and filter-conditioner. It has been designed by MiT’s engineers specifically to protect digital projectors and other cinema electronics in the d-cinema age. It consists of a rugged, industrial-grade EMI/RFI filter, combined with spike and surge protection components in a unique circuit arrangement that protects and absorbs spikes and surges line-to-ground as well as line-to-line. The unit includes a counter display to indicate how many power spikes and surges have been absorbed and eliminated. It also includes LEDs that indicate the status of all AC phases.

The unit has been designed to withstand and absorb severe spikes and surges, including those from nearby lightning strikes. In the event of a direct, catastrophic lightning strike to the theatre, the IS-30 will take the hit, sacrificing its components within and saving your delicate equipment. It incorporates a ‘bypass’ switch that restores the Power in an unfiltered state, to get the show back on-screen quickly. When the unit is switched to the ‘Bypass’ mode a red LED illuminates as a reminder that spike protection is not in effect.

Note: When used with smaller projectors utilizing 2-pole power, the third pole of the unit may be used to protect other equipment in the auditorium, i.e. automations, servers, audio racks, etc.

IS-30 AC Spike Arrestor

• Regulatory-approved (pending)

• 3-phase power protection, for either small or large d-cinema projectors

• LEDs on the front panel indicate power status of all three phases

• Voltage ratings of 250VAC or 400VAC phase-to-phase

• Current rating of 35Amps per phase

• Bypass switch assures no service interruption due to unit failure


• Power connection by internal terminal blocks

• Conduit knockouts on the rear side for routing power in and out

• 2 U rack mountable


Features:

28

Block Diagram:


Electrical Specifications:• AC Requirements: 200-250VAC or 350-440VAC 3-phase, 35A per phase (50A breaker

max.)• Certified to: UL 1449, IEC 61643-1, EN 61643-11/21, Class 3 / Category A• Spike absorption Section:

• Threshold voltage: 2kv • Peak Surge current: 5000A• Typical Life: 300 strikes (@500A surge)

• EMI Filter Section:• Insertion loss: 75dB typical line-to-line and line-to-ground (@1MHz)

OptionsA000290-001 120/208V versionA000290-002 230/400V version

Mechanical:Dimensions: 19.0 x 3.47 (2U) x 10” (preliminary)Weight: 21lb (9.5kg)

29


• CircuitBreakersfor:

• Projector

• Exhaust

• Masking

• Accessory

• Spare

• Dimmer

• NorthAmericaandInternationalVoltageversionsavailable

• ApprovedtoUL60950(bearsETLlabel)

• Duplexreceptaclesontherearoftheunit

Features:

The MOVING iMAGE TECHNOLOGIES Power Distribution

Unit (PDU) is optional with the MiT Digital Cinema

Bases.Itincludesterminalblocksforterminatinginput

ACpowerandoutputloads,aswellascircuitbreakers

for theprojector, serverandotherauditorium related

devices.ThePDU’sflexibilityallowsasimpleinterface

for repurposing existing cinemawiring during retrofits

aswell as a comprehensive distribution point for new

Digital Cinema installations. The unit is certified and

inspectedtomeetUL60950.

PDU (PowerDistributionUnit)

30



Electrical Requirements:•208VACor380VAC,60Aservice

Part Numbers & OptionsA000176-001 NorthAmerica,2pole.30Aservice

A000176-002 NorthAmerica,3pole.60Aservice

A000176-201 International,2pole.30Aservice

A000176-202 International,3pole.60Aservice

PE00035-015 CircuitBreaker,1-pole,15A




PE00364-030 CircuitBreaker,2-pole,30Avv



Mechanical:Dimensions: 14.0”Hx9.0”Wx7.5”W

31


MOVING iMAGE TECHNOLOGIES M-Series lighting dimmers are designed specifically for commercial cinemas with emphasis on reliability and value. Units come with front panel mounted manual override and LED indicators for programming, status and level. The M-Series lighting dimmers are available in 2 and 4 channels supporting up to 9600 Watts of lighting power. The M-series lighting dimmer supports incandescent, fluorescent* and LED lamps for the ultimate flexibility in your architectural lighting selection. (*Dimmable ballasts required.)

M-Series Lighting Dimmers

• Tested to UL standards (US and Canada)

• Low-profile wall mount

• Model M4800 supports 2 channels at 2400 Watts each

• Model M9600 supports 4 channels at 2400 Watts each

• Independent ramp/fade rate for each channel

• 3-position levels per channel with precision settings

• Emergency bypass/panic feature, full-on instantly

• Fuse protected solid-state control logic

• Full length heat sink for reliable heat dissipation

• Simple, dry contact, interface to any cinema automation

• Supports low load, Fluorescent* and LED lamps (*Dimmable ballast required)

• Toroidal transformer filtering

• 100-120V, 50/60Hz

Features:

32


Options & Part Numbers

• Secondary Branch Circuit Breakers Available• 200-240volt, 50/60Hz version for international applications• M4800 2 channel standard. PA00001-001 [120V] , -002 [220V]• M9600 4 channel available.

Internals

33


The MOVING iMAGE TECHNOLOGIES A-LMS platform is the latest addition to our suite of products to support

green initiatives, in this case for theater lighting applications. The A-LMS brings ‘smart’ capabilities to

auditorium lighting control based on the use of power-saving LED fixtures.

In a typical installation, the A-LMS receives scene cue commands from an automation or d-cinema server

via GPI contact closures, RS-232, or network interface.

The unit comes standard with a lacing bar at the rear to facilitate and support the control cabling. The

rack mounting ears may be removed if the unit is desired to mount to a wall.

A-LMS 24

• Designed for modern LED fixtures that use the 1-10VDC architectural dimming standard

• Analog output drive capability: 60mA per channel, typically drives up to 20 fixtures

• Can also control incandescent lamps with an optional external module

• Four scene presents

• Two output channels standard, four output channel option

• User programmable and status via Ethernet with user-friendly web interface

• Scene cues selected by GPI contact closures, serial commands, or LAN commands

• Emergency override “All on” and “resume” functions

• Includes on/off relays for switching AC power to fixtures: 250VAC, 15A max. per channel


• 1U rack-mountable or wall-mountable

• Pluggable terminal blocks for all connections

Features:

34



Electrical Requirements:12VDC @ 1A (an inline power supply is included with the unit)

Part Numbers: Accessories & Options:A000230-001 Assy, A-LMS 24 Unit, 2-channel A000230-002 Assy, A-LMS 24 Unit, 4 channelPA00016-112 Power Supply, 12V, inline (IEC),Universal 100-230VAC input

Mechanical:Dimensions: 19.0 x 11.75 x 1.7 in. [483 x 300 x 44mm]Weight: 7lbs [3.1 kg

35


Architectural Lighting Management System

Important note: There are different types of LED fixtures and ballasts available. Some are dimmable to 10%, others are dimmable to 1%. For cinema use it’s essential that you procure LED fixtures that are dimmable to 1%.

Screen Shot of A-LMS Interface

• BoostsTheEfficiencyOfYourProjectorExhaustWhileDeliveringTheDemandRequired.

• EliminatesWastingConditionedAirInYourBoothToCoolAProjectorThatDoesn’tNeedIt.

• PrimaryExhaustControlisretainedviatheProjectororAutomation.

• SupplementaryControlViaTemperatureOrHumidity(water)Sensors.

• CapableOf2StageOperation(LOW-HIGH)WhenUsedWithA2StageFan.

• InterfaceswithFireAlarmSystemtoRetainProperBuildingAlarmEmergencyBehavior.

• PassiveModelforbasic,2stageoperationoftheprimaryandboosterexhaust.

• AdvancedmodelforEthernetconnectivityandfeedbacktoahousemonitoringsystemorNOC.

• PassiveandAdvancedmodelswilldetecttemperatureandmoisture.

• AdvancedModelwillsupportEthernetconnectionandlogging/trendingofflow,temperatureandhumidity.

• Duringdowntimetheexhaustcanbecycledtopreventcooldowndraftsfromchillingyourelectronicspreventingpotentialcondensationbuildupinsidetheprojectorduetotemperaturedifferential.

• Dampersaresometimesusedbutarerarelyinsulated.

• Inwindy,heavyrainstorms,protectedroofventscanstillbeinundatedbywater.

-Emergencyexhaustactuationcanpreventsomewaterfromreachingtheprojector.

-Atminimum,staffcanbenotifiedtodetachtheexhaustinawatercompromisedsituation.

TheDCE-10/20isaclosedloopcontrollerforyourprojectorexhaust.TheDCEisdesignedtoefficientlycontrol your projector exhaust, on demand, by managing your airflow and prevent the wasting ofconditionedairthroughyourprojectorwhencoolingisnotneeded.Thistranslatestoanenergysavingsbymanaging conditioned air demand of your projection booth. Depending onmodel, theDCE canprovidecfm,temperatureandhumiditydatatoyourNOCtomanagetheoperatingconditionsofyourprojector.

36


DCE-10 DCE-20

• PassiveConnectivity• PrimaryFanControl• BoosterControl• GPIOInterface• TemperatureSensing• MoistureSensing• FireAlarmInterface• CondensationPreventionFanCycling

37


DCE-10/20 Exhaust Fan ControllerDCE-10/20 Installation Schematic

• DCE-10FeaturesPlus• PrimaryAndBoosterControl• 2StageBoosterFanControl(High-Low)• CFMMeasurementAndFeedback• TemperatureFeedback• LoggingOfFlow,TempAndMoisture

MOVING iMAGE SOURCE

38

All-In-One Alternative Content Console



Welcome to the World of Alternative Content

In the world of Alternative Content, your solution is the MOVING iMAGE SOURCE, designed to support

a variety of alternative content for the Single Screen Cinema or Modern Multi-Screen complex.

Completely mobile, this rugged, semi-scalable & multi-functional station incorporates everything under

the sun. It helps the exhibitor tap in to new markets and new revenue streams utilizing their Digital

Cinema investment.

The MOVING iMAGE SOURCE is available in 3 standard configuration and can be customized with the

features you require to accommodate all of your Alternative Content needs. Video Conferencing via

your broadband connection (Skype, Go2Meetings, Webcasts), Big Screen Gaming Competitions (Picture

in Picture) and anything you can imagine.

Features:• 7 Channel Stereo Mixing Console

• Convenient A/V Patch Panel

• HDMI Input (digital audio & video)

• VGA Input

• Component Video Input

• Composite & S Video Input

• Analog Audio (x2)

• Video Switcher/Scaler included to properly

format and switch A/V sources

• Blu-Ray Player

• Stereo Headphones

• Wired Mcrophone

STB Series Audio Termination Enclosure

The MOVING iMAGE TECHNOLOGIES STB Enclosures are designed for terminating and interfacing audio amplifiers to loudspeakers in a cinema. Large gauge terminal blocks are provided for all channel connections. Reliable bare wire connections provide secure contact without the use of crimp connections. STB enclosures can be shipped ahead to the job site to be incorporated into the audio system conduit layout. In retrofit upgrades the STB can be mounted in the narrow space between existing conduits to provide convenient access to your new B-Chain connections.

STB

• Heavy, 16GA Steel Construction

• Durable Powder-Coat Finish.

• Tall, Narrow Footprint To Fit Between Other Conduits

• For Use In New Construction Or Retrofits

• Easily Identify All Of Your B-Chain Connections

• Reliable, Bare-wire Terminal Blocks for Secure Connections

• Supports Quad Amp, Stage Channels

• Convenient For Series And Paralleling Surround Speakers

• All Connection Points Labeled With Printed ID

• 2” And 1.5” EMT Knockouts On All Four Sides

• Keyholes For Wall Mounting

40


Mechanical:

Connections:

Dimensions: 40.0 X 12.0 X 4.1”

• Left, Center, Right: 4 Pairs Each• Sub Channels: 8 Pairs• Left, Right Surrounds: 12 Pairs Each• Left, Right Back Surrounds: 6 Pairs Each• 112 Total Connection Points

Part NumberA000320-001

41


Features:


Some users have found that in certain

installations with unusually long or large

diameter lenses that the lens can vibrate,

causing a soft image on the screen. To address

this problem MiT has developed a bracket

that supports these types of lenses. The lens

stabilizer bracket mounts to the rear of the

MiT XL Mover and does not interfere with its

operation (XL Mover sold separately).

The lens is supported by non-marking nylon

transfer balls that allow the lens to continue

to rotate and move in and out for focusing

and zooming. The bracket telescopes

vertically, and includes adjustment slots for

both vertical and lateral adjustment.

• Works with a wide variety and diameter of lenses

• Allows lens to continue to turn and telescope in and out while being supported

• Easily retrofitted to an existing XL Mover

Mechanical:

Features:

16” Height overall (adjustable)5.50” width2.0” depth

Weight: 3 lb (estimated)

Lens Stabilizer

Part Numbers:


B000200-001 CARRIER PLATFORM, PROJECTION SYSTEM (1 required per projector) C000351-006 SPACER BLOCK, PROJECTION SYSTEM, 6” HEIGHT (optional, used in pairs) C000360-001 TRACK, GUIDE RAIL, END (4’) [1220mm] (2 ends required per rail) C000360-102 TRACK, GUIDE RAIL, EXTENSION (2’) [610mm]C000360-104 TRACK, GUIDE RAIL, EXTENSION (4’) [1220mm]C000361-001 LINK BAR, GUIDE RAIL (1 required for each joint in the guide rail) C000362-001 TRACK, FLAT RAIL, END (4’) [1220mm] (2 ends required per rail)C000362-102 TRACK, FLAT RAIL, EXTENSION (2’) [610mm]C000362-104 TRACK, FLAT RAIL, EXTENSION (4’) [1220mm]

Using two track ends without an extension provides an 8’ [2440mm] usable track length. This is the minimum stock length, add extensions to this as required to develop the length needed. Contact MiT if a track length less than 8’ is desired, if you require the track systems to be a single continuous piece, or if you need a custom height spacer.

Note: for the most precise positioning you may elect to use two guided rails forward and rear, however a flat plate is generally used in the rear for better operator ergonomics.

Upgrades & Enhancements:The system may also be modified to allow one or both projection systems to pivot up to +/-4°. This is sometimes desired in the post production environment to allow side-by-side projection simultaneously. For this modification the following additional item is available:

B000201-001 KIT, PROJECTOR PIVOT

Note: This upgrade requires the use of p/n C000351-006 spacer blocks, and they must have relief slots machined for the projector mounting bolts to slide in. For this upgrade please provide details on the specific projectors being mounted so the correct slot pattern may be incorporated at the time of manufacture.

43


iMAGE MOVER Projection Transport System

MiT’s custom floor mounting track system permits two or more projection systems to be positioned laterally in a projection booth. The projection systems may be film and digital, or any other combinations. The track system allows either projection system to be on the projection centerline, even sharing the same port window if necessary – eliminating the need to modify existing buildings. Projectors can also be placed closer together to minimize image keystoning of either system while still permitting user access as required. Even large equipment can be positioned with little effort and locked accurately into place.

• Low profile rail (no trip hazard)

• Heavy-duty steel construction

• Continuous track lengths in custom lengths also available

• Platform height of 6”, standard

• Custom spacer heights also available

• Large urethane V-wheels with roller bearings

• Safety bumpers on carriers and track end

• Durable black powder coat finish

• Modular track, stock sections are combined to create any custom length

• Welded steel spacer blocks available to raise height in 6”increments (stock)

• Positive pin locking system for locating carriers in place

• Positive guide rail prevents dirt or obstructions from interfering with movement

• 1200lb [550kg] capacity

Features:

iMAGE MOVER

42

44

45


46


47

48


49

50


51


52

53

Sa

leS@

mo

vin

gim

aget

ech

.co

m |

1-86

6-m

it-8

501

| mo

vin

gim

aget

ech

.co

m

54

55

• 24/7/365HealthandStatusMonitoring

• 24/7/365PhoneSupport

• 24/7/365RemoteSupport

• EarlyDetectionofProblems

• ProactiveResponseandCorrection

• RemoteFirmwareandSoftwareUpgrades

• ConsumablesManagement

• DirectDispatchofyourServiceprovider(ifrequired)

• Direct,SecureconnectiontoyourDigitalCinemaNetwork.(ViaYourISP)

• ReliabledataloggingviatheiMAGEWATCHserverinstalledinyourtheatre.

• CinedigmCertified

Features:

Network Operations Center

AttheMOVINGiMAGETECHNOLOGIESNetworkOperationsCenter,wewillensureyourDigitalCinemaSystemsaremonitored,evenwhenyourprojectionboothisnot.MiTNOCservicesallowyoutoefficientlydevelopyourTheatreTechnologyInfrastructurewithoutthestressofmanagingtheassets.TheMiTNOCwill remotelymonitoryournetworkedcinemaassets24hoursaday,365daysayearandkeepyouinformedofyoursystemhealth.Trainedtechniciansmonitoryoursystemssothatifaproblemarises,thepropercourseofactionistakeneverytime.Wecanassistinmanagingresolutionsinthefastestpossiblemethodbydispatching your serviceagencywith thenecessary information to resolveyourissuepromptly,onthefirstattempt.

56


•Temperatures•FanSpeeds• StorageCapacity• LampHours•ErrorMessages• SoftwareVersions• SeismicFootClamps•FilterHours

Continuously Monitoring

Monitoring the Heartbeat of Your Cinema System

TheiMAGEWATCHisthefoundationofareliable,monitoredDigitalCinemaSystem.TheiMAGEWATCHcollectsyourTMS,DigitalProjector,ScreenServer,AutomationandUPShealthandstatus(SNMP)dataandrelays it, inrealtime,totheMiTNOC. DigitalCinemaTechniciansmonitorthis informationtoensureanyanomaliesareaddressedwiththeproperurgencytoensuremaximumuptime.TheiMAGEWATCHcollectsanddistributesplaybacklogstokeepyouincompliancewithVPFagreements.

Analyzed For Trends Possibly Indicating

NETW

ORK O

PERA

TION

CENT

ER

PROJ

ECTO

R

SCRE

EN SE

RVER

AUTO

MAT

ION

UPS

• Overheating• ComponentFailure• LimitedStorageCapacity• NetworkIssues• Lamp/FilterEndofLife• SoftwareIncompatibilities• CorruptedContent• KDMExpiration

57


iMAGE WATCH

2014 mit catalog - moving image tech

Documents