2015 catalog - multiquip inc€¦ · for each diamond tool. as the number of diamond icons...
TRANSCRIPT
2015 CATALOG
We’ve been manufacturing quality diamond tools in Honey Brook, Pennsylvania for more than 60 years.
Our Honey Brook research and development department consistently improves these products through the use of more innovative and unique materials and equipment. Customer service and field application specialists work closely with customers, providing the latest technical information available.
Multiquip’s goal is to secure your future success through innovation, quality and first class customer service.
Since our inception, Multiquip has supplied the construction industry with high quality products.
Our blade manufacturing facility in Honey Brook, Pennsylvania utilizes state-of-the-art manufacturing processes and equipment, insuring that customers receive the highest quality products possible.
Equipment Reference Icons For Diamond Tool Applications
Specific equipment and tool icons are placed next to the diamnd tools to represent the proper applications.Be sure to check that the tool or equipment you are using is operating at the proper shaft speed or R.P.M., mounting flanges are free of any debris and the proper size for the specific blade diameter. Never operate the tool or equipment without the proper guards in place.
Tile Saws (4" - 10")Arbors: 5/8" round
Hand Held Drills (3/8"- 1/2")Chucks: 3/8" or 1/2" Jacobs chuck
Core Drills (Stand Mounted)Mounting shaft: Male 1 1/4 - 7 threaded
Core Drills (Hand Held)Mounting Shafts: Male 18mm, 5/8"-11 or 1 1/4"-7 threaded
Hand Held Cut Off Saw (Gas)Arbors: 1" or 20mm (Stihl) round
Masonry Saws (14" - 24") Electric and GasArbors: 1" all blade sizes
Flat Saw (60+ HP)Arbors: 1" + D.P.H. all blade sizes
Flat Saw (30 to 40 HP)Arbors: 1" + D.P.H. all blade sizes
Flat Saw (8 to 13 HP)Arbors: 1" + D.P.H. all blade sizes
Flat Saw (16 to 25 HP)Arbors: 1" + D.P.H. all blade sizes
Random Crack SawArbors: 1" + D.P.H. all blade sizes
Angle Grinders (4" - 9")Arbors: 7/8" or 5/8" round, or 5/8"-11 threaded
Circular Saws (4" - 10")Arbors: 5/8" round or diamond knock out (worm drive)
Hand Held Cut Off Saw (Elec.)Arbors: 1" or 20mm (Stihl) round
Floor Grinder3/4" with 4 holes 3/8"-24 threaded and 4 holes 25/64" countersunk
Flat Saw (Green Concrete)Arbors: 5/8" round
Diamond Tools — Reference Guide
Value/Performance Icons Cooling Method Icons
WETCUT
DRY/WETCUT
DRYCUT
DRYDRILL
These icons represent overall performance, grade and value for each diamond tool. As the number of diamond icons increase, the higher the diamond content, while tool life increases and overall usage costs decrease.
Blade and bit cooling icons are placed next to the diamond tools to represent the required methods—either water and/or ambient air—to properly cool the diamond tool during operations.
Economy
Economy Plus
Standard
Premium
Premium Plus
Supreme
Professional
Diamond Tools classified as “DRY/WET” may be cooled with water or use the circular airflow of operations to diminish the build-up of heat. When operating “DRY”, it is best to use an intermittent cutting/drilling procedure to allow sufficient time for steel core barrel cooling.
Diamond Tools classified as “WET” must be used with water to reduce the extreme heat that builds up during operations. Water also reduces the dust signature and helps remove residue. Operating a WET product without water may cause diamond tool damage and create a safety hazard. A continuous flow of fresh water is critical to safe, effective operations.
Diamond Tools classified as “DRY Cut” are specifically engineered to operate with the circular airflow as the sole agent for cooling the core/barrel. Water may be used to help cool and control dust.
Diamond Tools classified as “DRY Drill” are specifically engineered to operate with the circular airflow as the sole agent for cooling the core bit barrel. Their optimum performance is generally characterized by not using water, but minimal water may be introduced to help cool and control dust during drilling operations.
Table of Contents
General Purpose Segmented; Dry/Wet CutGeneral Purpose; Asphalt; Green Concrete Segmented; Dry/Wet Cut......................................................... 1 - 4
Turbo Style Continuous and Segmented Rim; General PurposeHard Materials; Stone; Dry/Wet Cutting .............................. 5 - 6
Special Purpose Segmented Combo Blades; Everything Blade; Ductile Iron; Walk behind for Cured; Asphalt .....................................................7
Masonry Standard; Laser Cut Noise Reduction; Sandwich Silent CoresBrick; Clay Pavers; Concrete Pavers; Block ...................... 8 - 10
Masonry; Wet/Dry Cutting; SegmentedTurbo Segmented PSTXL; Segmented PVL (pavers); Segmented BBL (block) ...............................................................11
Stone Segmented; Turbo Rim; Wet/Dry Cut ............................12
Tile; Ceramic; Porcelain; Continuous Rim; Wet & Dry Cut ..13
Cup Grinding Wheels; Dry/Wet CutSingle; Double Row Segmented; Sidewinder Cups; Continuous Turbo Cups ........................................................ 14 - 16
Floor Grinding Discs; 10"; Dry/Wet Cut ....................................16
Tuck Point Blades - Dry/Wet Cut ...............................................17
Special Purpose Diamond Blades - Dry/Wet Cut“V” Shape (CKV) Crack Chaser; Crack Router Blades (PCC/PCCA); Walk behind (PWBC/PWBA); Loop Sawing for Floor Saws ........................................................18
Core Bits; Standard; Premium Series; Wet CuttingCB Series; PRB Series; Bit Adapters and Extensions ............19
Core Bits; Professional Series; Wet CuttingPCB and PCBA Series; PPB and PPBA Series; PSB Series ..20
Core Bits; Cobra Professional Series; Dry CuttingComplete Sets and Replacement Bits Only ..............................21
Core Bits; Blockbuster Premium Series; Dry CuttingComplete Sets and Replacement Bits Only; Accessories, Extensions and Adapters.................................... 22
Drill Bits; Ceramics; Stone Premium Series; Dry Cutting ... 23
CDM1H - Hand Held Core Drill Kit ............................................ 23
Cured Concrete; Asphalt Overlay for Walk Behind Saws; Wet CuttingPremium; Premium Plus ................................................................24
Asphalt; Green Concrete for Walk Behind Saws; Wet CuttingPremium; Premium Plus ................................................................25
Cured Concrete; Asphalt Overlay for Walk Behind Saws; Wet CuttingProfessional 7,000 through 11,000 Series .........................26 - 27
Asphalt—for Walk Behind Saws; Wet CuttingProfessional 7,000 through 9,000 Series .................................. 28
Green Concrete—for Walk Behind Saws; Wet CuttingPremium; Premium Plus; Professional 9,000 through 11,000 Series ....................................................................29
Joint Widening—for Walk Behind Saws; Wet CuttingProfessional 9,000 through 11,000 Series ................................ 30
New Wave Joint Cleaning; Wire Brushes; Bevel Blades; SpacersProfessional 11,000 Series New Wave Joint Cleaning Blades; 8,000 Series 45 Degree Bevel Blades; Heavy Duty 12"x 3/8" Wire Brushes; Steel Spacers for Stacking Blades ........................................................................31
Wall Saw; Hydraulic Hand Saw; Wet CuttingSplit Segment; Twin Segment; Sandwich Segment ................32
Rubber Vulcanized Diamond WireCrimping Sleeves ........................................................................... 33
Pavement Grinding ...................................................................... 34
Pavement Grooving ......................................................................35
RST; One Pass; One Piece Joint Sawing and Widening SystemGreen Concrete Wet Cutting; Asphalt Wet/Dry Cutting ....... 36
SITS; One Pass; Three Piece Joint Sawing; Widening SystemGreen Concrete; Wet Cutting ......................................................37
SITS-S; One Pass; Three Piece Shallow Joint Sawing; Widening SystemGreen Concrete; Wet Cutting; Asphalt; Wet/Dry Cutting ..... 38
Technical InformationCutting Depth and Blade Speed Charts; Core Bit Speed Chart; Diamond Blade Troubleshooting; USA Aggregate Map ..............................................................39 - 43
Dry/Wet Cutting Segmented Diamond Blades
DRY/WETCUT
GES — General Purpose — EconomyQuality performance, value priced for cured concrete and medium hard masonry
Model Size Arbor List $
4GES 4" x .080 5/8"-7/8" $12
4GESMP 4" x .080 5/8"-7/8" $42
45GES 4.5" x .080 5/8"-7/8" $14
45GESMP 4.5" x .080 5/8"-7/8" $64
5GES 5" x .080 5/8"-7/8" $18
6GES 6" x .095 5/8"-7/8" $23
7GES 7" x .090 5/8"-DK $25
7GESMP 7" x .090 5/8"-DK $114
10GES 10" x .100 5/8"-DK $38on all 12" and 14" blades
Segment Ht. 4" through 10" .390"/10mm12" and 14" .550"/14mmNote: The suffix MP indicates a Multi-Pack of 5 blades.
DRY/WETCUT
SEG — General Purpose — Economy PlusQuality performance at low initial cost for cured concrete and medium hard masonry
Note: The suffix MP indicates a Multi-Pack of 5 blades.
Model Size Arbor List $
12SEG 12" x .125 1"-20mm $88 Sintered Welded
12SEGL 12" x .110 1"-20mm $88 Laser Welded 10mm seg. height
12SEGXL 12" x .125 1"-20mm $110 Laser Welded 12mm seg. height
12SEGLMP 12" x .125 1"-20mm $405 Laser Welded 10mm seg. Height (5-pack)
14SEG 14" x .125 1"-20mm $103 Sintered Welded
14SEGL 14" x .125 1"-20mm $121 Laser Welded 10mm seg. height
14SEGXL 14" x .125 1"-20mm $130 Laser Welded 12mm seg. height
14SEGLMP 14" x .125 1"-20mm $565 Laser Welded 10mm seg. Height (5-pack)
1
Model Size Arbor List $
10GESMP 10" x .100 5/8"-DK $175
12GES 12" x .125 1"-20mm $85
12GESM 12" x .125 20mm $85
12GESMP 12" x .125 1"-20mm $370
12GESMMP 12" x .125 20mm $370
14GES 14" x .125 1"-20mm $99
14GESM 14" x .125 20mm $99
14GESMP 14" x .125 1"-20mm $434
14GESMMP 14" x .125 20mm $434
14GESA 14" x .125 1"-20mm $126
Dry/Wet Cutting Segmented Diamond Blades
DRY/WETCUT
DRY/WETCUT
GPS — General Purpose — Standard
SBL — General Purpose — Premium
GPS — Quality performance at a low cost for cured concrete and medium hard masonryGPSA — Quality performance at a low cost for asphalt, green concrete and concrete block
SBL — Excellent performance for cured concrete and medium hard masonrySBLA — Excellent performance for asphalt, green concrete and abrasive materials
on all 12" and 14" blades
on all 12" and 14" blades
Segment Ht. .390"/10mmNote: The suffix MP indicates a Multi-Pack of 5 blades.
Segment Ht. 4" through 10" and 12SBLA/M and 14SBLA/M .390"/10mm12SBL/M and 14SBL/M .470"/12mm
Model Size Arbor List $4GPS 4" x .080 5/8"-7/8" $234GPSMP 4" x .080 5/8"-7/8" $9445GPS 4.5" x .080 5/8"-7/8" $2645GPSMP 4.5" x .080 5/8"-7/8" $1125GPS 5" x .080 5/8"-7/8" $296GPS 6" x .080 5/8"-DK $337GPS 7" x .090 5/8"-DK $447GPSMP 7" x .090 5/8"-DK $1998GPS 8" x .090 5/8"-DK $5410GPS 10" x .100 5/8"-DK $8510GPSMP 10" x .100 5/8"-DK $36812GPS 12" x .125 1"-20mm $11512GPSMP 12" x .125 1"-20mm $55012GPSM 12" x .125 20mm $115
Model Size Arbor List $12GPSMP 12" x .125 1"-20mm $55012GPSA 12" x .125 1"-20mm $13312GPSAMP 12" x .125 5-Pack 1"-20mm $58912GPSAM 12" x .125 20mm $13312GPSAMMP 12" x .125 20mm $59714GPS 14" x .125 1"-20mm $13814GPSMP 14" x .125 1"-20mm $66014GPSM 14" x .125 20mm $13814GPSMMP 14" x .125 20mm $66014GPSA 14" x .125 1"-20mm $15614GPSAMP 14" x .125 5-Pack 1"-20mm $69814GPSAM 14" x .125 20mm $15614GPSAMMP 14" x .125 20mm $698
Model Size Arbor List $4SBL 4" x .080 5/8"-7/8" $3245SBL 4.5" x .080 5/8"-7/8" $345SBL 5" x .080 5/8"-7/8" $416SBL 6" x .095 5/8"-DK $517SBL 7" x .095 5/8"-DK $698SBL 8" x .095 5/8"-DK $769SBL 9" x .095 5/8"-DK $7810SBL 10" x .095 5/8"-DK $10012SBL 12" x .125 1"-20mm $15012SBLM 12" x .125 20mm $15012SBLA 12" x .125 1"-20mm $15012SBLAM 12" x .125 20mm $150
Model Size Arbor List $14SBL 14" x .125 1"-20mm $17514SBLM 14" x .125 20mm $17514SBLA 14" x .125 1"-20mm $17514SBLAM 14" x .125 20mm $17516SBL 16" x .125 1"-20mm $28816SBLM 16" x .125 20mm $28816SBLA 16" x .125 1"-20mm $25516SBLAM 16" x .125 20mm $25518SBL 18" x .125 1" $36018SBLA 18" x .125 1" $36020SBL 20" x .125 1" $45520SBLA 20" x .125 1" $455
2
Dry/Wet Cutting Segmented Diamond Blades
DRY/WETCUT
DRY/WETCUT
PDHS1 — General Purpose — Premium Plus
PDHS2 — General Purpose — Supreme
PDHS1 — Superior performance for cured concrete and medium hard masonryPDHS1A — Superior performance for asphalt, green concrete and abrasive materials
PDHS2 — Outstanding performance for cured concrete and medium hard masonryPDHS2A — Outstanding performance for asphalt, green concrete and abrasive materials
Model Size Arbor List $12PDHS1 12" x .125 1"-20mm $19512PDHS1M 12" x .125 20mm $19512PDHS1A 12" x .125 1"-20mm $20512PDHS1AM 12" x .125 20mm $20514PDHS1 14" x .125 1"-20mm $25514PDHS1M 14" x .125 20mm $25514PDHS1A 14" x .125 1"-20mm $26514PDHS1AM 14" x .125 20mm $26516PDHS1 16" x .125 1"-20mm $34916PDHS1M 16" x .125 20mm $34916PDHS1A 16" x .125 1"-20mm $34916PDHS1AM 16" x .125 20mm $34918PDHS1 18" x .125 1" $38518PDHS1A 18" x .125 1" $385
Segment Ht. 12PDHS1/M and 14PDHS1/M .470"/12mm12PDHS1A/M and 14PDHS1A/M .390"/10mm
Model Size Arbor List $12PDHS2 12" x .125 1"-20mm $27512PDHS2M 12" x .125 20mm $27512PDHS2A 12" x .125 1"-20mm $28512PDHS2AM 12" x .125 20mm $28514PDHS2 14" x .125 1"-20mm $34014PDHS2M 14" x .125 20mm $34014PDHS2A 14" x .125 1"-20mm $34014PDHS2AM 14" x .125 20mm $34016PDHS2 16" x .125 1"-20mm $39516PDHS2M 16" x .125 20mm $39516PDHS2A 16" x .125 1"-20mm $40516PDHS2AM 16" x .125 20mm $40518PDHS2 18" x .125 1" $43518PDHS2A 18" x .125 1" $43520PDHS2 20" x .140 1" $46520PDHS2A 20" x .140 1" $465
Segment Ht. 12PDHS2/M and 14PDHS2/M .390"/10mm12PDHS2A/M and 14PDHS2A/M .470"/12mm
3
Dry/Wet Cutting Segmented Diamond Blades
4
DRY/WETCUT
FCG1 - SP1G — Slab Saver Segmented Blades — ProfessionalSS9G and SS10G — Excellent performance for green concreteSS9C and SS10C — Excellent performance for cured concrete and decorative sawing
Segment Ht. .400"/10mm
Model Size Arbor List $
SS9G110 9" x .110 5/8" $220
SS10G 10" x .110 5/8" $255
SS9C 9" x .110 5/8" $220
SS10C 10" x .110 5/8" $255
DRY/WETCUT
PSA — Abrasive Materials — PremiumExcellent performance for asphalt, green concrete and abrasive materials
Model Size Arbor List $
7PSA 7" x .095 5/8"-7/8" $69
8PSA 8" x .095 5/8"-7/8" $78
9PSA 9" x .095 5/8"-7/8" $91
10PSA 10" x .095 5/8"-DK $105
Segment Ht. .390"/10mm
SSCG2 and SSCG4 Segmented Blades with Soff-Cut® ArborSSCG2: Green concrete, medium to hard aggregate.SSCG4: Green concrete, soft to medium hard aggregate.
Soff-Cut® is a registered trademark of Husqvarna Construction Products and is not associated with Multiqip Inc.
Model Size Arbor List $Skid Plate IncludedSSCG255080T 5.5"x.080 Triangle $156SSCG206095T 6" x .095 Triangle $196SSCG208095T 8" x .095 Triangle $251SSCG210095T 10" x .095 Triangle $315SSCG212125T 12" x .125 Triangle $468SSCG213125T 13 3/8" x .125 Triangle $518SSCG214125T 14" x .125 Triangle $531Skid Plate IncludedSSCG406095T 6" x .095 Triangle $196SSCG410095T 10" x .095 Triangle $315SSCG413125T 13 3/8" x .125 Triangle $518SSCG413250T 13 3/8" x .250 Triangle $841
Model Size/Kerf Net PriceSkid Plate OnlySSP6809 6" & 8"/.095" $39SSP1009 10"/.095" $44SSP1212 12"/.125" $51SSP1412 13 3/8"&14"/.125 $52SSP1425 13 3/8"& 14"/.250 $52
5
DRY/WETCUT
DRY/WETCUT
DRY/WETCUT
PSTXL — Turbo Segmented — Premium
GET — Turbo Rim — Economy
GPT — Turbo Rim — Standard
Excellent performance, for fast cutiing in very hard concrete, masonry and stone
Quality performance, value priced, for medium hard cured concrete and masonry
Quality performance for medium hard cured concrete and masonry
Segment Ht. .590"/15mm
Model Size Arbor List $
12PSTXL 12"x .125 1"-20mm $269
14PSTXL 14"x .125 1"-20mm $310
Model Size Arbor List $4GET 4" x .080 5/8"-7/8" $134GETMP 4" x .080 5/8"-7/8" $4945GET 4.5" x .080 5/8"-7/8" $1545GETMP 4.5" x .080 5/8"-7/8" $615GET 5" x .080 5/8"-7/8" $157GET 7" x .090 5/8"-DK $257GETMP 7" x .090 5/8"-DK $9810GET 10" x .100 5/8"-DK $71
Model Size Arbor List $10GETMP 10" x .100 5/8"-DK $30512GET 12" x .125 1"-20mm $11112GETM 12" x .125 20mm $11112GETMP 12" x .125 1"-20mm $48912GETMMP 12" x .125 20mm $48914GET 14" x .125 1"-20mm $14014GETM 14" x .125 20mm $14014GETMP 14" x .125 1"-20mm $62814GETMMP 14" x .125 20mm $628Rim Ht. .276"/7mm
Rim Ht. .276"/7mm
Model Size Arbor List $4GPT 4" x .080 5/8"-7/8" $194GPTMP 4" x .080 5/8"-7/8" $7845GPT 4.5" x .080 5/8"-7/8" $2345GPTMP 4.5" x .080 5/8"-7/8" $985GPT 5" x .080 5/8"-7/8" $357GPT 7" x .090 5/8"-DK $457GPTMP 7" x .090 5/8"-DK $2008GPT 7" x .090 5/8"-DK $55
Model Size Arbor List $10GPT 10" x .100 5/8"-DK $8510GPTMP 10" x .100 5/8"-DK $39512GPT 12" x .125 1"-20mm $12512GPTM 12" x .125 20mm $12512GPTMP 12" x .125 1"-20mm $57812GPTMMP 12" x .125 20mm $57814GPT 14" x .125 1"-20mm $13814GPTM 14" x .125 20mm $13814GPTMP 14" x .125 1"-20mm $64414GPTMMP 14" x .125 20mm $644
Dry/Wet Cutting Turbo Rim Diamond Blades
DRY/WETCUT
HSLC — Turbo Segmented — EconomyQuality performance, value priced for medium hard curecd concrete and masonry
Segment Ht. .470"/12mm
Model Size Arbor List $
12HSLC 12"x .125 1"-20mm $69
14HSLC 14"x .125 1"-20mm $88
6
Dry/Wet Cutting Turbo Rim Diamond Blades
DRY/WETCUT
TBL — Turbo Rim — Premium
CHT — Turbo Wave Design — Premium
CHST — Turbo Wave Design — Premium
Excellent performance for medium hard cured concrete and masonry
Excellent performance for medium hard cured concrete and masonry
Excellent performance for very hard granite, stone, concrete and masonry
Rim Ht. .390"/10mm
Rim Ht. .390"/10mm
Rim Ht. .390"/10mm
Model Size Arbor List $4TBL 4" x .080 5/8"-7/8" $3845TBL 4.5" x .080 5/8"-7/8" $425TBL 5" x .080 5/8"-7/8" $496TBL 6" x .090 5/8"-7/8" $607TBL 7" x .090 5/8"-DK $728TBL 8" x .090 5/8"-DK $8010TBL 10" x .090 5/8"-DK $13512TBL 12" x .125 1"-20mm $19012TBLM 12" x .125 20mm $19014TBL 14" x .125 1"-20mm $20514TBLM 14" x .125 20mm $205
Model Size Arbor List $4CHT 4" x .080 5/8"-7/8" $5445CHT 4.5" x .080 5/8"-7/8" $605CHT 5" x .080 5/8"-7/8" $657CHT 7" x .090 5/8"-DK $908CHT 8" x .090 5/8"-DK $11510CHT 10" x .090 5/8"-DK $15012CHT 12" x .125 1"-20mm $23514CHT 14" x .125 1"-20mm $265
Model Size Arbor List $4CHST 4" x .080 5/8"-7/8" $5445CHST 4.5" x .080 5/8"-7/8" $605CHST 5" x .080 5/8"-7/8" $657CHST 7" x .090 5/8"-DK $909CHST 9" x .090 5/8"-DK $15010CHST 10" x .100 5/8"-DK $15712CHST 12" x .125 1"-20mm $23514CHST 14" x .125 1"-20mm $265
DRY/WETCUT
DRY/WETCUT
7
Dry/Wet Cutting Turbo Rim Diamond Blades Special Series
Rim Ht. .197"/5mm
Model Size Arbor List $12TDI 12" x .110 1"-20mm $23512TDIM 12" x .110 20mm $235
TDI — Ductile Iron — PremiumExcellent performance for very hard granite, stone, concrete and masonry
DRYCUT
Model Size Arbor List $14TDI 14" x .110 1"-20mm $31514TDIM 14" x .110 20mm $31516TDI 16" x .125 1"-20mm $42516TDIM 16" x .125 20mm $425
DRY/WETCUT
HSC — Combination Turbo Segment — SupremeExcellent performance for concrete, asphalt, masonry and stone
Segment Ht. .470"/12mm
Model Size Arbor List $12HSC 12" x .125 1"-20mm $26514HSC 14" x .125 1"-20mm $325
Model Size Arbor List $16HSC 16" x .125 1"-20mm $37518HSC 18" x .125 1" $41520HSC 20" x .140 1" $495
Model Size Arbor List $45HSE 4.5" x .080 5/8"-7/8" $557HSE 7" x .095 5/8"-7/8" $9912HSE 12" x .125 1"-20mm $21512HSEM 12" x .125 20mm $215
HSE — “Everything” Diamond Blade — PremiumUniquely designed for fast cutting in steel, plastic, glass, concrete, masonry and stone
DRYCUT
Model Size Arbor List $14HSE 14" x .125 1"-20mm $25014HSEM 14" x .125 20mm $25016HSE 14" x .125 1"-20mm $329
Model Size Arbor List $14PWBC 14" x .125 1" $34016PWBC 16" x .125 1" $395
DRY/WETCUT
PWBC — Walk Behind Saws — Cured Concrete — Preimum +Excellent performance for cured concrete on 13HP to 25HP saws
Segment Ht. .470"/12mm
Model Size Arbor List $18PWBC 18" x .125 1" $43520PWBC 20" x .125 1" $465
Model Size Arbor List $14PWBA 14" x .125 1" $34016PWBA 16" x .125 1" $395
DRY/WETCUT
PWBA — Walk Behind Saws — Asphalt — Preimum +Excellent performance for asphalt and green concrete on 13HP to 25HP saws
Segment Ht. .390"/10mm
Model Size Arbor List $18PWBA 18" x .125 1" $43520PWBA 20" x .125 1" $465
8
Wet Cutting Masonry Blades Supreme Series
PMK — Standard Core — BrickOutstanding performance in hard brick and masonry materials
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMK 14"x.110 1" $369
20PMK 20"x.140 1" $659
WETCUT
PV — Standard Core — Hard Brick and PaversOutstanding performance in hard brick and pavers
Segment Ht. .300"/7.62mm
Model Size Arbor List $
10PV 10"x.110 1" $268
12PV 12"x.110 1" $345
14PV 14"x.110 1" $369
20PV 20"x.140 1" $659
WETCUT
PMA — Standard Core — Brick and BlockOutstanding performance in medium hard brick and block
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMA 14"x.110 1" $369
20PMA 20"x.140 1" $659
WETCUT
PMB — Standard Core — BlockOutstanding performance in block and soft abrasive masonry
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMB 14"x.110 1" $369
20PMB 20"x.140 1" $659WETCUT
9
Wet Cutting Masonry Blades Supreme Series
PMKNR — Laser Cut Core — BrickNoise reducing laser cut core design for hard brick and masonry materials
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMKNR 14"x.110 1" $475
20PMKNR 20"x.140 1" $850
WETCUT
Segment Ht. .300"/7.62mm
PVNR — Laser Cut Core — Hard Brick and PaversNoise reducing laser cut core design for very hard brick and pavers
Model Size Arbor List $
14PVNR 14"x.110 1" $475
20PVNR 20"x.140 1" $850
WETCUT
PMANR — Laser Cut Core — Brick and BlockNoise reducing laser cut core design for brick and block
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMANR 14"x.110 1" $475
20PMANR 20"x.140 1" $850
WETCUT
PMBNR — Laser Cut Core — BlockNoise reducing laser cut core design for block
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMBNR 14"x.110 1" $475
20PMBNR 20"x.140 1" $850
WETCUT
10
Wet Cutting Masonry Blades Supreme Series
PMKSC — Sandwich Core — BrickMaximum noise reduction sandwich core design for hard brick and masonry material
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMKSC 14"x.110 1" $559
20PMKSC 20"x.140 1" $940
WETCUT
PVSC — Sandwich Core — Hard Brick and PaversMaximum noise reduction sandwich core design for hard brick and masonry material
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PVSC 14"x.110 1" $559
20PVSC 20"x.140 1" $940
WETCUT
PMASC — Sandwich Core — Brick and BlockMaximum noise reduction sandwich core design for hard brick and masonry material
Segment Ht. .300"/7.62mm
Model Size Arbor List $
14PMASC 14"x.110 1" $559
20PMASC 20"x.140 1" $940
WETCUT
Segment Ht. .300"/7.62mm
PMBSC — Sandwich Core — BlockMaximum noise reduction sandwich core design for hard brick and masonry material
Model Size Arbor List $
14PMBSC 14"x.110 1" $559
20PMBSC 20"x.140 1" $940
WETCUT
11
Wet/Dry Cutting Diamond Blades Masonry Series
PSTXL — Turbo Segmented — PremiumExcellent performance for fast cutting in very hard concrete, masonry and stone
Segment Ht. .590"/15mm
Model Size Arbor List $
12PSTXL 12"x .125 1"-20mm $269
14PSTXL 14"x .125 1"-20mm $310
BBL — Block — PremiumExcellent quality and performance for soft abrasive block and masonry materials
Segment Ht. .590"/15mm
Model Size Arbor List $
14BBL 14"x.110 1"-20mm $230
20BBL 20"x.125 1" $400
DRY/WETCUT
PVL — Hard Paver Brick — PremiumExcellent quality and performance for hard to very hard brick pavers
Segment Ht. .590"/15mm
Model Size Arbor List $
10PVL 10"x.095 5/8"-DK $90
12PVL 12"x.110 1"-20mm $230
12PVLM 12"x.110 20mm $230
14PVL 14"x.110 1"-20mm $280
14PVLM 14"x.110 20mm $280
16PVL 16"x.125 1"-20mm $390
20PVL 20"x.125 1" $510
DRY/WETCUT
DRY/WETCUT
12
Wet/Dry Cutting Diamond Blades Stone Series
DRY/WETCUT
PSG— Very Hard Materials — PremiumExcellent performance for granite, stone, hard masonry and concrete
Segment Ht. .390"/10mm
Model Size Arbor List $
4PSG 4" x .080 5/8"- 7/8" $33
45PSG 4.5" x .080 5/8"- 7/8" $36
5PSG 5" x .080 5/8"- 7/8" $42
6PSG 6" x .095 5/8"- DK $52
7PSG 7" x .095 5/8"- DK $69
8PSG 8" x .095 5/8"- DK $78
9PSG 9" x .095 5/8"- DK $91
10PSG 10" x .095 5/8"- DK $105
DRY/WETCUT
HSG— Very Hard Materials — PremiumExcellent performance for granite, stone, hard masonry and concrete
Segment Ht. .470"/12mm
Model Size Arbor List $
12HSG 12"x.110 1"-20mm $260
12HSGM 12"x.110 20mm $260
14HSG 14"x.125 1"-20mm $315
14HSGM 14"x.125 20mm $315
20HSG 20"x.140 1" $510
CHST— Turbo Wave Design — PremiumExcellent performance for very hard granite, stone, concrete and masonry
Segment Ht. .390"/10mm
Model Size Arbor List $
4CHST 4" x .080 5/8"- 7/8" $54
45CHST 4.5" x .080 5/8"- 7/8" $60
5CHST 5" x .080 5/8"- 7/8" $65
7CHST 7" x .090 5/8"- DK $90
9CHST 9" x .090 5/8"- 7/8" $150
10CHST 10" x .100 5/8"- DK $157
12CHST 12" x .125 1"-20mm $235
14CHST 14" x .125 1"-20mm $265
DRY/WETCUT
13
Dry/Wet Cutting Diamond Blades Tile Series
T — Tile Series — StandardQuality performance, value priced for ceramic tile and soft to medium stone
Rim Ht. .390"/10mmWETCUT
Model Size Arbor List $4T 4" x .060 5/8"-7/8" $1745T 4.5" x .060 5/8"-7/8" $20
Model Size Arbor List $7T 7" x .060 5/8"-7/8" $327TMP 7" x .060 5/8"-7/8" 14010T 10" x .060 5/8"-7/8" $5510TMP 10" x .060 5/8"-7/8" $250
TP — Tile Series — PremiumQuality performance, smooth cutting for ceramic tile and soft to medium hard stone
WETCUT
Model Size Arbor List $4TP 4" x .060 5/8"-7/8" $204TPMP 4" x .060 5/8"-7/8" $8545TP 4.5" x .060 5/8"-7/8" $246TP 6" x .060 5/8" $397TP 7" x .060 5/8" $447TPMP 7" x .060 5/8" $205
Model Size Arbor List $8TP 8" x .060 5/8" $579TP 9" x .060 5/8" $6510TP 10" x .060 5/8" $6910TPMP 10" x .060 5/8" $32512TP 12" x .080 1" $10214TP 14" x .080 1" $116
Rim Ht. 4TP & 45TP .315"/8mm, 6TP Through 14TP .390"/10mm
TS — Tile Series — SupremeQuality performance, smooth cutting for ceramic tile and soft to medium hard stone
Rim Ht. .390"/10mm
WETCUT
Model Size Arbor List $4TS 4" x .060 5/8"-7/8" $3445TS 4.5" x .060 5/8"-7/8" $426TS 6" x .060 5/8" $507TS 7" x .060 5/8" $55
Model Size Arbor List $8TS 8" x .060 5/8" $7010TS 10" x .060 5/8" $7512TS 12" x .080 1" $12314TS 14" x .080 1" $140
PTP — Porcelain Series — PremiumQuality performance, smooth cutting for ceramic tile and soft to medium hard stone
Rim Ht. .390"/10mm WETCUT
Model Size Arbor List $7PTP 7" x .060 5/8"-7/8" $658PTP 8" x .060 5/8"-7/8" $7510PTP 10" x .060 5/8"-7/8" $90
DRY/WETCUT
TD — Tile Dry Cutting Series — PremiumQuality performance for ceramic and porcelain tile, qually tile, marble and granite
Rim Ht. .295"/7.5mm
Model Size Arbor List $4TD 4" x .060 5/8"-7/8" $3845TD 4.5" x .060 5/8"-7/8" $41
Model Size Arbor List $5TD 5" x .060 5/8"-7/8" $448TD 8" x .060 5/8"-7/8" $6710TD 10" x .060 5/8"-7/8" $84
14
Dry/Wet Diamond Cup Wheels
DRY/WETCUT
CS and CST — Single Row Cup — StandardFast, smooth grinding performance for concrete, masonry and stone
Model Size Arbor List $
4CS 4" 5/8"-7/8" $49
4CST 4" 5/8"-11 Thd. $49
7CS 7" 5/8"-7/8" $69
7CST 7" 5/8"-11 Thd. $69
DRY/WETCUT
CSP and CSPT — Single Row Cup — Premium Fast, smooth grinding performance for concrete, masonry and stone
Model Size Arbor List $
4CSP 4" 5/8"-7/8" $78
4CSPT 4" 5/8"-11 Thd. $78
7CSP 7" 5/8"-7/8" $131
7CSPT 7" 5/8"-11 Thd. $131
DRY/WETCUT
CD and CDT — Double Row Cup — StandardFast, smooth grinding performance for concrete, masonry and stone
Model Size Arbor List $
4CD 4" 5/8"-7/8" $85
4CDT 4" 5/8"-11 Thd. $85
7CD 7" 5/8"-7/8" $135
7CDT 7" 5/8"-11 Thd. $135
DRY/WETCUT
CDP and CDPT — Double Row Cup — PremiumFast, smooth grinding performance and excellent finer finish for concrete, masonry and stone
Model Size Arbor List $
4CDP 4" 5/8"-7/8" $125
4CDPT 4" 5/8"-11 Thd. $125
7CDP 7" 5/8"-7/8" $195
7CDPT 7" 5/8"-11 Thd. $195
15
Wet/Dry Diamond Cup Wheels
DRY/WETCUT
CTS and CTST — Single Row Turbo Cup — StandardFast, smooth grinding performance for concrete, masonry and stone
Model Size No. of Segs. Arbor List $
4CTS 4" 8 5/8"-7/8" $35
4CTST 4" 8 5/8"-11 Thd. $35
7CTS 7" 12 5/8"-7/8" $65
7CTST 7" 12 5/8"-11 Thd. $65
Model Size No. of Segs. Arbor List $
4CTP 4" 8 5/8"-7/8" $63
4CTPT 4" 8 5/8"-11 Thd. $63
7CTP 7" 12 5/8"-7/8" $105
7CTPT 7" 12 5/8"-11 Thd. $105DRY/WET
CUT
CTP and CTPT — Single Row Turbo Cup — Premium Fast, smooth grinding performance for concrete, masonry and stone
Model Size No. of Segs. Arbor List $
4CTS2 4" 14 5/8"-7/8" $60
4CTST2 4" 14 5/8"-11 Thd. $60
7CTS2 7" 24 5/8"-7/8" $98
7CTST2 7" 24 5/8"-11 Thd. $98DRY/WET
CUT
CTS2 and CTST2 — Double Row Turbo Cup — StandardFast, smooth grinding performance for concrete, masonry and stone
Model Size No. of Segs. Arbor List $
4CTP2 4" 14 5/8"-7/8" $90
4CTPT2 4" 14 5/8"-11 Thd. $90
7CTP2 7" 24 5/8"-7/8" $149
7CTPT2 7" 24 5/8"-11 Thd. $149DRY/WET
CUT
CTP2 and CTPT2 — Double Row Turbo Cup — PremiumFast, smooth grinding performance for concrete, masonry and stone
16
Dry/Wet Diamond Wheel Cups
DRY/WETCUT
PDGW — Floor Grinding Disc — PremiumFast, aggressive grinding performance for professional finishes on hard non-abrasive materials
Model Size Arbor List $10PDGW 10" * $398
* Arbor: Hole patterns are engineered to fit most 10" grinding machines. Arbor is 3/4" with 4 holes 3/8"-24 threaded and 4 hole 25/64" countersunk.
DRY/WETCUT
PDGWA — Floor Grinding Disc — PremiumFast, aggressive grinding performance for professional finishes on soft abrasive materials
Model Size Arbor List $10PDGWA 10" ** $398
* Arbor: Hole patterns are engineered to fit most 10" grinding machines. Arbor is 3/4" with 4 holes 3/8"-24 threaded and 4 hole 25/64" countersunk.
DRY/WETCUT
SWC and SWCT — Sidewinder Cup — ProfessionalAggressive material removal; leaves professional surface for concrete, masonry and stone
Model Size Arbor List $4SWC 4" 5/8"-7/8" $1194SWCT 4" 5/8"-11 Thd. $119
Model Size Arbor List $7SWC 7" 5/8"-7/8" $1957SWCT 7" 5/8"-11 Thd. $195
DRY/WETCUT
CTM and CTMT — Continuous Turbo Cup — PremiumExcellent medium grit for professional finish grinding for concrete, masonry and stone
Model Size Arbor List $4CTM 4" 5/8"-7/8" $1504CTMT 4" 5/8"-11 Thd. $150
Model Size Arbor List $7CTM 7" 5/8"-7/8" $2597CTMT 7" 5/8"-11 Thd. $259
DRY/WETCUT
CTC and CTCT — Continuous Turbo Cup — PremiumExcellent coarse grit finish grinding for professional results for concrete, masonry and stone
Model Size Arbor List $4CTC 4" 5/8"-7/8" $1504CTCT 4" 5/8"-11 Thd. $150
Model Size Arbor List $7CTC 7" 5/8"-7/8" $2597CTCT 7" 5/8"-11 Thd. $259
17
Dry/Wet Cutting Diamond Tuck Point Blades
GTK — Tuck Point — EconomyQuality aggressive material removal for brick/block mortar joints
Model Size Arbor List $4GTK 4" x .250 5/8"-7/8" $3045GTK 4.5" x .250 5/8"-7/8" $38
Segment Ht. .390"/10mm
Model Size Arbor List $5GTK 5" x .250 5/8"-7/8" $487GTK 7" x .250 5/8"-7/8" $78
DRY/WETCUT
TK — Tuck Point — StandardGreat aggressive material removal for brick/block mortar joints
Model Size Arbor List $4TK 4" x .250 5/8"-7/8" $484TK500 4" x .500 5/8"-7/8" $99
Model Size Arbor List $45TK 4.5" x .250 5/8"-7/8" $525TK 5" x .250 5/8"-7/8" $587TK 7" x .250 5/8"-7/8" $96Segment Ht. .315"/8mm DRY/WET
CUT
PTK — Tuck Point — PremiumExcellent aggressive material removal for brick/block mortar joints
Model Size Arbor List $4PTK 4" x .250 5/8"-7/8" $754PTK375 4" x .375 5/8"-7/8" $1034PTK500 4" x .500 5/8"-7/8" $140
Segment Ht. .390"/10mm
Model Size Arbor List $45PTK 4.5" x .250 5/8"-7/8" $905PTK 5" x .250 5/8"-7/8" $1007PTK 7" x .250 5/8"-7/8" $155 DRY/WET
CUT
WTK — Double Wafer Tuck Point — PremiumLightning fast material removal for increased productivity over conventional tuck point blades
Model Size Arbor List $4WTK 4" x .250 5/8"-7/8" $6445WTK 4.5" x .250 5/8"-7/8" $67
Segment Ht. .390"/10mm
Model Size Arbor List $5WTK 5" x .250 5/8"-7/8" $737WTK 7" x .250 5/8"-7/8" $133
DRY/WETCUT
3WTK — Triple Wafer Tuck Point — PremiumLightning fast material removal for increased productivity over conventional tuck point blades
Model Size Arbor List $43WTK 4" x .375 5/8"-7/8" $75453WTK 4.5" x .375 5/8"-7/8" $85Segment Ht. .390"/10mm
Model Size Arbor List $53WTK 5" x .375 5/8"-7/8" $10073WTK 7" x .375 5/8"-7/8" $205
DRY/WETCUT
18
Dry/Wet Cutting Special Purpose Diamond Blades
Note: Additional diameters and kerf thicknesses available on request.
CKV — “V” Shape Crack Chaser — PremiumQuickly route and widen cracks in surfaces that require a “V” groove for sealing preparation; Fast cutting and long life in concrete and asphalt
Segment Ht. .500"/12.7mm
Model Size Arbor List $4CKV 4" x .375" 5/8"-7/8" $1304CKVT 4" x .375" 5/8"-11 Thrd $13045CKV 4" x .500" 5/8"-7/8" $15545CKVT 4" x .500" 5/8"-11 Thrd $155
Model Size Arbor List $7CKV 7" x .375" 5/8"-7/8" $21575CKV 7" x .500" 5/8"-7/8" $2558CKV 8" x .375" 5/8"-7/8" $28585CKV 8" x .500" 5/8"-7/8" $340
DRY/WETCUT
DRY/WETCUT
PCC and PCCA Crack Chaser Blades — SupremeExcellent production and life for widening cracks for repair in concrete and asphalt;Fast cutting and long life in concrete, asphalt and abrasive materials
Segment Ht. .300"/12.7mm
Model Size Arbor List $825PCC 8" x .250" 1" $487837PCC 8" x .375" 1" $505850PCC 8" x .500" 1" $526
Model Size Arbor List $825PCCA 8" x .250" 1" $487837PCCA 8" x .375" 1" $505850PCCA 8" x .500" 1" $526
PWBC and PWBA Dry/Web Walk Behind Blades — Premium PlusPWBC: Superior quality, performance and operational life in cured concrete on 13HP to 20HP Saws;PWBA: Superior quality, performance and operational life in asphalt on 13HP to 20HP Saws
Model Size Arbor List $14PWBC 14"x.125" 1" $34016PWBC 16"x.125" 1" $39518PWBC 18"x.125" 1" $43520PWBC 20"x.125" 1" $465
Model Size Arbor List $14PWBA 14"x.125" 1" $34016PWBA 16"x.125" 1" $39518PWBA 18"x.125" 1" $43520PWBA 20"x.125" 1" $465
Segment Ht. PWBC .470"/12mm, PWBA .390"/10mm
DRY/WETCUT
LSC and LCA Dry/Wet Traffic Loop Sawing Blades — SupremeLSC: Uniquely designed for traffic loop sawing in cured concrete; LSA: Uniquely designed for long life traffic loop sawing in asphalt
Model Size Arbor List $LSC1425 14"x.250 1" $741LSC1437 14"x.375 1" $864
Segment Ht. .350"/9mm
Model Size Arbor List $LSA1425 14"x.250 1" $702LSA1437 14"x.375 1" $784
DRY/WETCUT
19
Diamond Core Bits
WETCUT
Diameter Seriesin. Thread CB List $ PRB List $
3/4" 5/8"-11 34CB $70 - -1" 5/8"-11 1CB $77 1PRB $80
1 1/4" 5/8"-11 - - 114PRB $921 1/2" 5/8"-11 112CB $108 112PRB $98
2" 1 1/4"- 7 2CB $130 2PRB $1402 1/4" 1 1/4"- 7 - - 214PRB -2 1/2" 1 1/4"- 7 212CB $147 212PRB $152
3" 1 1/4"- 7 3CB $188 3PRB $1953 1/2" 1 1/4"- 7 312CB $218 312PRB $226
4" 1 1/4"- 7 4CB $245 4PRB $2404 1/2" 1 1/4"- 7 412CB $275 412PRB $270
5" 1 1/4"- 7 5CB $300 5PRB $2995 1/2" 1 1/4"- 7 - - 512PRB $340
6" 1 1/4"- 7 6CB $369 6PRB $3596 1/2" 1 1/4"- 7 - - 612PRB $399
7" 1 1/4"- 7 7CB $425 7PRB $4308" 1 1/4"- 7 8CB $500 8PRB $4809" 1 1/4"- 7 9CB $540 9PRB $532
10" 1 1/4"- 7 10CB $600 10PRB $60911" 1 1/4"- 7 - - 11PRB $79512" 1 1/4"- 7 12CB $755 12PRB $73814" 1 1/4"- 7 14CB $900 14PRB $892
Model Description Net Price
ADM1858 Adapter 18mm Female to 5/8"-11 Male $36
AD12JC5811 Adapter, ½” Jacobs Chuck to 5/8”-11 M $16
AD114758 Bit Adapter 1 1/4"-7 Female to 5/8"-11 M $43
AD581147 Bit Adapter 5/8"-11 Female to 1 1/4"-7 M $44
ADM181147 Bit Adapter M18 Female to 1 1/4"-7 Male $40
EXT12M18 Bit Extension 12" x M18 Female/Male $88
EXT65811 Bit Extension 6" x 5/8"-11 Female/Male $35
EXT125811 Bit Extension 12" x 5/8"-11 Female/Male $49
EXT61147 Bit Extension 6" x 1 1/4"-7 Female/Male $45
EXT121147 Bit Extension 12" x 1 1/4"-7 Female/Male $60
EXT241147 Bit Extension 24" x 1 1/4"-7 Female/Male $91
CB ....... Standard: Great quality, performance and operational life. Designed for light steel reinforcement applications and general purpose drilling of medium hard cured concrete, masonry and stone.
PRB .... Premium: Excellent quality, performance and operational life. Designed for light steel reinforcement applications and general purpose drilling of medium hard cured concrete, masonry and stone.
Diamond Core Bits
Core Bit Extensions and Adapters
CB PRB
Diameter Series
in. Thread PCB/PCBA PPB/PPBA PSB
1/2" 5/8"-11 $120 $128 -
5/8" 5/8"-11 $123 $132 -
3/4" 5/8"-11 $128 $137 -
7/8" 5/8"-11 $134 $144 -
1" 5/8"-11 $135 $147 $158
1 1/4" 5/8"-11 $156 $151 $183
1 1/2" 5/8"-11 $160 $166 $201
1 3/4" 1 1/4"- 7 $173 $195 $235
2" 1 1/4"- 7 $180 $200 $240
2 1/4" 1 1/4"- 7 $221 $245 -
2 1/2" 1 1/4"- 7 $223 $247 $253
3" 1 1/4"- 7 $276 $305 $296
3 1/2" 1 1/4"- 7 $310 $344 $354
4" 1 1/4"- 7 $348 $387 $387
4 1/4" 1 1/4"- 7 $400 $443 -
4 1/2" 1 1/4"- 7 $401 $445 $444
5" 1 1/4"- 7 $449 $499 $493
5 1/2" 1 1/4"- 7 $525 $583 -
6" 1 1/4"- 7 $516 $574 $607
6 1/4" 1 1/4"- 7 $621 $689 -
6 1/2" 1 1/4"- 7 - - -
7" 1 1/4"- 7 $671 $745 -
8" 1 1/4"- 7 $716 $796 -
9" 1 1/4"- 7 $811 $901 -
10" 1 1/4"- 7 $889 $987 -
11" 1 1/4"- 7 $963 $1,070 -
12" 1 1/4"- 7 $1,033 $1,147 -
14" 1 1/4"- 7 $1,227 $1,363 -
20
Professional Series Core Bits
WETCUT
Professional Series Diamond Core Bits
PCB PPB PSB
PCB ..... Supreme: Excellent performance and long life in cured concrete with moderate to heavy steel reinforcement, hard masonry and stone.
PCBA .. Supreme: Excellent performance and and long life in asphalt, green concrete and all abrasive materials.
PPB ..... Professional: Highest quality, performance and long life in cured concrete with heavy steel reinforcement, hard masonry and stone.
PPBA .. Professional: Highest quality, performance and and long life in asphalt, green concrete and all abrasive materials.
PSB ..... Professional: Highest quality, performance and long life. Narrow slotted crown (1"- 1 3/4") and narrow slot segmented (2" - 6") for pre-stressed cured concrete.
21
Cobra II Professional Dry Diamond Core Bits
Cobra Professional Dry Diamond Core Bits — Complete SetsThe Multiquip Cobra II Core Bit Series provides exceptional hand-held drilling performance when the job can not or will not allow the use of water to cool the core bit. The unique design of the core barrel, and diamond segment matrix permits fast and accurate dry drilling operations. Most popular core bit diameters are available.
n For hand-held core drills
n Dry drilling design
n For drilling cured concrete
n Unique “fluted” core barrel
n COB2 bit set series includes pilot starter bit
Part No. Description List $
78COB2 7/8" COBRA-II Bit Set $169
1COB2 1" COBRA-II Bit Set $170
114COB2 1 1/4" COBRA-II Bit Set $176
112COB2 1 1/2" COBRA-II Bit Set $183
134COB2 1 3/4" COBRA-II Bit Set $200
2COB2 2" COBRA-II Bit Set $209
214COB2 2 1/4" COBRA-II Bit Set $223
212COB2 2 1/2" COBRA-II Bit Set $239
234COB2 2 3/4" COBRA-II Bit Set $254
3COB2 3" COBRA-II Bit Set $271
312COB2 3 1/2" COBRA-II Bit Set $304
4COB2 4" COBRA-II Bit Set $339
412COB2 4 1/2" COBRA-II Bit Set $379
5COB2 5" COBRA-II Bit Set $408
6COB2 6" COBRA-II Bit Set $443
C2CP COBRA-II Center Pin Only $20*
CH2S Adapter, COBRA-II 5/8"-11 Male/Female Replacement $8*
Cobra II with Pilot Bit Cobra II Core BitPart No. Description List $
78COB2BO 7/8" COBRA-II Bit Only $154
1COB2BO 1" COBRA-II Bit Only $155
114COB2BO 1 1/4" COBRA-II Bit Only $161
112COB2BO 1 1/2" COBRA-II Bit Only $168
134COB2BO 1 3/4" COBRA-II Bit Only $185
2COB2BO 2" COBRA-II Bit Only $194
214COB2BO 2 1/4" COBRA-II Bit Only $208
212COB2BO 2 1/2" COBRA-II Bit Only $224
234COB2BO 2 3/4" COBRA-II Bit Only $239
3COB2BO 3" COBRA-II Bit Only $256
312COB2BO 3 1/2" COBRA-II Bit Only $289
4COB2BO 4" COBRA-II Bit Only $324
412COB2BO 4 1/2" COBRA-II Bit Only $364
5COB2BO 5" COBRA-II Bit Only $393
6COB2BO 6" COBRA-II Bit Only $428
*Net Price
22
Blockbuster Dry Diamond Core Bits
Blockbuster Dry Diamond Core Bits
Dry Core Bit Accessories
DRYDRILL
Blockbuster Series bits are designed for fast, clean drilling to 9" depth in concrete block and soft masonry materials. Air slots in the cores aid in cooling. Bits easily adapt to most right angle grinders with 5/8"-11 threaded shafts, and hand held drills with 5/8"-11 to Jacobs chuck adapters.
Model Size Thread List $1DB 1" 5/8"-11 $65114DB 1 1/4" 5/8"-11 $70112DB 1 1/2" 5/8"-11 $75134DB 1 3/4" 5/8"-11 $902DB 2" 5/8"-11 $95214DB 2 1/4" 5/8"-11 $100212DB 2 1/2" 5/8"-11 $1173DB 3" 5/8"-11 $135312DB 3 1/2" 5/8"-11 $1764DB 4" 5/8"-11 $220412DB 4 1/2" 5/8"-11 $2465DB 5" 5/8"-11 $2806DB 6" 5/8"-11 $314
Model Description Net Price
ADM1858 Adapter, 18mm Female to 5/8"- 11 Male $36
ADM181147 Adapter, 18mm Female to 1 1/4"- 7 Male $40
AD12JC5811 Adapter, ½” Jacobs Chuck to 5/8”-11 M $16
EXT12M18 Bit Extension 12" x M18 Female/Male $88
EXT65811 Bit Extension 6" x 5/8"-11 Female/Male $35
EXT125811 Bit Extension 12" x 5/8"-11 Female/Male $49
C2CP COBRA-II Center Pin Only $20
CH2S Adapter,COBRA-II 5/8"-11 Male/Female Replacement $8
23
Dry Diamond Drill Bits for Ceramics and Stone
Dry Diamond Drill Bits for Ceramics and Stone — Premium
DRYDRILL
TB High quality drill bits for clean drilling of ceramics and soft stone. Designed for use on most hand drills with 3/8" or 1/2" chuck sizes. Drilling depth is 2".
Model Diameter Shank Diameter List $
12TB 1/2" 10mm $64
34TB 3/4" 10mm $67
78TB 7/8" *10mm $68
1TB 1" *10mm $69
118TB 1 1/8" *10mm $70
114TB 1 1/4" *10mm $71
138TB 1 3/8" *10mm $72
112TB 1 1/2" *10mm $78
158TB 1 5/8" *10mm $80
134TB 1 3/4" *10mm $86
178TB 1 7/8" *10mm $87
2TB 2" *10mm $87
212TB 2 1/2" *10mm $160
3TB 3" *10mm $165
*Includes Pilot Bit
List: $600
CDM1H — Wet and Dry Hand Held Core DrillOur CDM1H is a value-packed hand-held electric core drill kit capable of handling multiple drilling and coring applications. The CDM1H operates at 110V/13A, generates 2,000 RPM, provides a slip clutch and overload protection.
The high RPM is ideally suited for use with our COBRA series dry drilling core bits from 1" to 5" diameters, and wet drilling core bits up to 3" diameter.
Kit includes:
n Drill with convenient rest
n Water kit
n Wrenches
n M18F to 5/8"-11M and M18F to 1 1/4"-7M adapters
n Plastic carrying case.
24
Wet Cutting Diamond Blades — Walk Behind Series
Cured Concrete and Asphalt Overlay
Premium Premium Plus
WETCUT
Premium — Excellent quality,performance and blade life. .350" segment height.
Premium Plus — Superior quality,performance and blade life. .400" segment height.
Undercut Core Protection included on all asphalt overlay blades. Undercut core protection for cured concrete blades included on 24" and larger.
Size mm Model List $ Model List $
12x.125 305 x 3.2 121235C $386 121235AOL $421
12x.187 305 x 4.7 121835C $509 121835AOL $478
12x.250 305 x 6.4 122535C $559 122535AOL $508
14x.125 356 x 3.2 141235C $513 141235AOL $523
14x.165 356 x 4.2 141635C $605 141635AOL $577
14x.187 356 x 4.7 141835C $647 141835AOL $611
14x.250 356 x 6.4 142535C $741 142535AOL $680
14x.375 356 x 9.5 143735C $864 143735AOL $754
16x.125 406 x 3.2 161235C $637 161235AOL $620
18x.125 457 x 3.2 181235C $719 181235AOL $703
18x.187 457 x 4.7 181835C $839 181835AOL $792
20x.140 508 x 3.6 201435C $851 201435AOL $811
24x.165 610 x 4.2 241635C $1,180 241635AOL $1,127
24x.187 610 x 4.7 241835C $1,243 241835AOL $1,174
26x.165 660 x 4.2 261635C $1,259 261635AOL $1,204
26x.187 660 x 4.7 261835C $1,295 261835AOL $1,224
30x.187 762 x 4.7 301835C $1,541 301835AOL $1,462
30x.220 762 x 5.6 302235C $1,610 302235AOL $1,507
30x.250 762 x 6.4 302535C $1,765 302535AOL $1,635
36x.187 914 x 4.7 361835C $2,076 361835AOL $1,919
36x.220 914 x 5.6 362235C $2,091 362235AOL $1,971
36x.250 914 x 6.4 362535C $2,279 362535AOL $2,129
42x.187 1067 x 4.7 421835C $2,713 421835AOL $2,617
42x.220 1067 x 5.6 422235C $2,798 422235AOL $2,672
42x.250 1067 x 6.4 422535C $3,483 422535AOL $3,325
48x.187 1219 x 4.7 481835C $3,429 481835AOL $3,305
48x.220 1219 x 5.6 482235C $3,530 482235AOL $3,374
48x.250 1219 x 6.4 482535C $3,633 482535AOL $3,437
Size mm Model List $ Model List $
12x.125 305 x 3.2 121240C $416 121240AOL $430
12x.187 305 x 4.7 121840C $524 121840AOL $492
12x.250 305 x 6.4 122540C $582 122540AOL $526
14x.125 356 x 3.2 141240C $535 141240AOL $550
14x.165 356 x 4.2 141640C $621 141640AOL $591
14x.187 356 x 4.7 141840C $667 141840AOL $628
14x.250 356 x 6.4 142540C $769 142540AOL $702
14x.375 356 x 9.5 143740C $910 143740AOL $787
16x.125 406 x 3.2 161240C $649 161240AOL $632
18x.125 457 x 3.2 181240C $733 181240AOL $716
18x.187 457 x 4.7 181840C $863 181840AOL $813
20x.140 508 x 3.6 201440C $869 201440AOL $829
24x.165 610 x 4.2 241640C $1,210 241640AOL $1,154
24x.187 610 x 4.7 241840C $1,277 241840AOL $1,206
26x.165 660 x 4.2 261640C $1,290 261640AOL $1,233
26x.187 660 x 4.7 261840C $1,332 261840AOL $1,257
30x.187 762 x 4.7 301840C $1,582 301840AOL $1,501
30x.220 762 x 5.6 302240C $1,662 302240AOL $1,553
30x.250 762 x 6.4 302540C $1,824 302540AOL $1,684
36x.187 914 x 4.7 361840C $2,127 361840AOL $1,965
36x.220 914 x 5.6 362240C $2,150 362240AOL $2,026
36x.250 914 x 6.4 362540C $2,347 362540AOL $2,187
42x.187 1067 x 4.7 421840C $2,754 421840AOL $2,666
42x.220 1067 x 5.6 422240C $2,850 422240AOL $2,729
42x.250 1067 x 6.4 422540C $3,537 422540AOL $3,387
48x.187 1219 x 4.7 481840C $3,480 481840AOL $3,366
48x.220 1219 x 5.6 482240C $3,594 482240AOL $3,445
48x.250 1219 x 6.4 482540C $3,711 482540AOL $3,513
25
Wet Cutting Diamond Blades — Walk Behind Series
Asphalt and Green Concrete
Premium Premium Plus
WETCUT
Premium — Excellent quality,performance and blade life. .350" segment height.
Premium Plus — Superior quality,performance and blade life. .400" segment height.
Undercut Core Protection included on all blades
Size mm Model List $
12x.125 305 x 3.2 121235AG $432
12x.187 305 x 4.7 121835AG $487
12x.250 305 x 6.4 122535AG $521
14x.125 356 x 3.2 141235AG $555
14x.165 356 x 4.2 141635AG $594
14x.187 356 x 4.7 141835AG $628
14x.250 356 x 6.4 142535AG $702
14x.375 356 x 9.5 143735AG $784
16x.125 406 x 3.2 161235AG $634
18x.125 457 x 3.2 181235AG $717
18x.187 457 x 4.7 181835AG $814
20x.140 508 x 3.6 201435AG $831
24x.165 610 x 4.2 241635AG $1,153
24x.187 610 x 4.7 241835AG $1,204
26x.165 660 x 4.2 261635AG $1,231
26x.187 660 x 4.7 261835AG $1,262
30x.187 762 x 4.7 301835AG $1,495
30x.220 762 x 5.6 302235AG $1,544
30x.250 762 x 6.4 302535AG $1,677
36x.187 914 x 4.7 361835AG $1,963
36x.220 914 x 5.6 362235AG $2,021
36x.250 914 x 6.4 362535AG $2,181
42x.187 1067 x 4.7 421835AG $2,717
42x.220 1067 x 5.6 422235AG $2,777
42x.250 1067 x 6.4 422535AG $3,379
48x.187 1219 x 4.7 481835AG $3,362
48x.220 1219 x 5.6 482235AG $3,438
48x.250 1219 x 6.4 482535AG $3,504
Size mm Model List $
12x.125 305 x 3.2 121240AG $443
12x.187 305 x 4.7 121840AG $503
12x.250 305 x 6.4 122540AG $542
14x.125 356 x 3.2 141240AG $569
14x.165 356 x 4.2 141640AG $611
14x.187 356 x 4.7 141840AG $648
14x.250 356 x 6.4 142540AG $728
14x.375 356 x 9.5 143740AG $825
16x.125 406 x 3.2 161240AG $650
18x.125 457 x 3.2 181240AG $735
18x.187 457 x 4.7 181840AG $839
20x.140 508 x 3.6 201440AG $852
24x.165 610 x 4.2 241640AG $1,185
24x.187 610 x 4.7 241840AG $1,240
26x.165 660 x 4.2 261640AG $1,266
26x.187 660 x 4.7 261840AG $1,299
30x.187 762 x 4.7 301840AG $1,539
30x.220 762 x 5.6 302240AG $1,596
30x.250 762 x 6.4 302540AG $1,737
36x.187 914 x 4.7 361840AG $2,015
36x.220 914 x 5.6 362240AG $2,083
36x.250 914 x 6.4 362540AG $2,253
42x.187 1067 x 4.7 421840AG $2,772
42x.220 1067 x 5.6 422240AG $2,842
42x.250 1067 x 6.4 422540AG $3,454
48x.187 1219 x 4.7 481840AG $3,430
48x.220 1219 x 5.6 482240AG $3,519
48x.250 1219 x 6.4 482540AG $3,598
26
Cured Concrete; Bridge Deck; Asphalt Overlay — 14" to 20"WETCUT
CC34 ........... Critically hard aggregate: flint; chert; trap rock; basalt
CC35 ........... Hard aggregate: some river rock; hard granites; quartz; basalt; trap rock
CC/BD45 .... Bridge decks and some hard aggregates: heavy steel; suitabable for most aggregates with heavy steel
CC/AC55 .... Medium to hard aggregate: some granites; dense limestone; asphalt overlay
CC60 ........... Medium aggregate: sandstone; dolomite; dense limestone; asphalt overlay
CC/AC65 .... Medium to soft aggregate: soft limestone; asphalt overlay
List $
Size mm CC BD AC CC BD AC CC BD AC CC BD AC CC BD AC
Series 7,000 8,000 9,000 10,000 11,000
Segment Height .450 .500 .450 .500 .450 .500 .450 .500 .450 .500
14x.125 356x3.2 $702 $722 $709 $730 $719 $741 $733 $757 $750 $77714x.140 356x3.6 722 744 729 753 741 767 757 784 776 80514x.155 356x3.9 757 782 765 791 778 806 795 825 816 84914x.165 356x4.2 770 797 779 807 793 822 811 843 833 86814x.187 356x4.7 807 838 817 849 832 867 853 891 879 91914x.220 356x5.6 854 891 866 904 884 925 908 952 938 98614x.250 356x6.4 911 961 925 977 946 1001 974 1032 1009 107114x.375 356x9.5 1095 1170 1116 1194 1147 1229 1188 1275 1241 133416x.125 406x3.2 838 862 847 871 859 884 875 903 896 92616x.140 406x3.6 862 888 870 898 884 914 903 935 925 96016x.155 406x3.9 888 918 898 929 913 946 934 969 958 99716x.165 406x4.2 904 935 915 947 931 965 952 989 978 101916x.187 406x4.7 969 1006 981 1019 999 1039 1023 1067 1054 110116x.220 406x5.6 1024 1068 1038 1083 1060 1108 1088 1140 1124 118016x.250 406x6.4 1092 1151 1108 1169 1133 1197 1165 1234 1206 127918x.125 457x3.2 941 967 951 978 964 992 982 1012 1005 103918x.140 457x3.6 967 997 977 1008 992 1026 1013 1048 1038 107618x.155 457x3.9 1015 1049 1026 1061 1043 1080 1066 1105 1093 113618x.165 457x4.2 1033 1067 1045 1081 1063 1101 1087 1127 1116 116118x.187 457x4.7 1103 1144 1117 1159 1137 1181 1163 1213 1198 125018x.220 457x5.6 1165 1213 1180 1230 1204 1257 1235 1293 1275 133818x.250 457x6.4 1240 1305 1258 1326 1285 1357 1321 1398 1367 144820x.125 508x3.2 1096 1126 1107 1138 1122 1155 1143 1179 1170 121020x.140 508x3.6 1126 1161 1137 1173 1155 1194 1179 1221 1209 125320x.155 508x3.9 1172 1211 1185 1225 1204 1248 1231 1277 1263 131320x.165 508x4.2 1193 1233 1207 1248 1228 1272 1256 1303 1289 134220x.187 508x4.7 1288 1336 1304 1353 1327 1379 1358 1416 1399 145920x.220 508x5.6 1360 1416 1378 1436 1406 1468 1442 1510 1488 156220x.250 508x6.4 1448 1524 1469 1548 1501 1584 1543 1632 1596 1690
27
Cured Concrete; Bridge Deck; Asphalt Overlay — 24" to 48"WETCUT
CC34 ........... Critically hard aggregate: flint; chert; trap rock; basalt
CC35 ........... Hard aggregate: some river rock; hard granites; quartz; basalt; trap rock
CC/BD45 .... Bridge decks and some hard aggregates: heavy steel; suitabable for most aggregates with heavy steel
CC/AC55 .... Medium to hard aggregate: some granites; dense limestone; asphalt overlay
CC60 ........... Medium aggregate: sandstone; dolomite; dense limestone; asphalt overlay
CC/AC65 .... Medium to soft aggregate: soft limestone; asphalt overlay
List $
Size mm CC BD AC CC BD AC CC BD AC CC BD AC CC BD AC
Series 7,000 8,000 9,000 10,000 11,000
Segment Height .450 .500 .450 .500 .450 .500 .450 .500 .450 .500
24x.155 610x3.9 $1396 $1441 $1411 $1457 $1433 $1482 $1463 $1516 $1500 $155824x.165 610x4.2 1419 1466 1435 1483 1459 1510 1491 1546 1530 159024x.187 610x4.7 1509 1564 1527 1583 1554 1613 1589 1655 1636 170524x.220 610x5.6 1591 1655 1612 1678 1644 1715 1685 1763 1738 182224x.250 610x6.4 1691 1778 1715 1806 1752 1847 1800 1902 1861 196926x.155 660x3.9 1583 1634 1599 1652 1625 1682 1660 1720 1702 176826x.165 660x4.2 1609 1662 1628 1683 1655 1714 1692 1754 1736 180626x.187 660x4.7 1705 1768 1725 1790 1756 1825 1797 1873 1850 193026x.220 660x5.6 1799 1873 1823 1899 1859 1941 1907 1996 1968 206426x.250 660x6.4 1914 2014 1942 2046 1984 2094 2039 2156 2109 223330x.165 762x4.2 1809 1866 1829 1887 1858 1921 1897 1964 1944 201930x.187 762x4.7 1859 1926 1881 1949 1914 1987 1957 2038 2014 209830x.220 762x5.6 1959 2038 1984 2066 2024 2111 2075 2169 2139 224230x.250 762x6.4 2177 2284 2206 2317 2251 2368 2310 2435 2385 251732x.187 813x4.7 1948 2015 1970 2039 2003 2076 2046 2127 2103 218832x.250 813x6.4 2267 2374 2296 2407 2342 2458 2400 2525 2475 260736x.165 914x4.2 2254 2320 2277 2345 2311 2384 2357 2434 2412 249836x.187 914x4.7 2317 2394 2342 2422 2381 2465 2431 2524 2497 259536x.220 914x5.6 2462 2554 2491 2586 2537 2638 2596 2707 2672 279136x.250 914x6.4 2638 2763 2672 2801 2725 2861 2793 2938 2880 303440x.187 1016x4.7 2774 2856 2802 2886 2845 2936 2901 3001 2973 308140x.220 1016x5.6 2895 2993 2929 3030 2979 3088 3046 3164 3130 325940x.250 1016x6.4 3043 3172 3082 3215 3138 3280 3214 3366 3309 347442x.187 1067x4.7 3027 3106 3054 3135 3095 3183 3150 3245 3218 332242x.220 1067x5.6 3143 3238 3177 3273 3224 3329 3289 3402 3370 349442x.250 1067x6.4 3588 3712 3626 3754 3680 3816 3753 3899 3844 400348x.187 1219x4.7 3741 3840 3774 3876 3826 3936 3894 4014 3980 411048x.220 1219x5.6 3886 4004 3928 4048 3988 4119 4068 4210 4170 432448x.250 1219x6.4 4065 4220 4112 4272 4179 4350 4270 4454 4385 4584
28
Asphalt Blades — 14" to 36"WETCUT
Custom specifications and sizes available on request.Slurc undercut protection available at no additional charge.
List $Size mm AS 7,000 AS 8,000 AS 9,000Segment Height .350 .400 .350 .400 .350 .400
14x.125 356x3.2 $625 $640 $631 $646 $638 $65614x.140 356x3.6 639 656 645 662 653 67214x.155 356x3.9 666 684 672 692 682 70314x.165 356x4.2 676 696 684 705 695 71714x.187 356x4.7 720 742 728 751 739 76614x.220 356x5.6 747 773 756 784 770 80114x.250 356x6.4 772 802 782 814 798 83214x.375 356x9.5 914 959 930 977 953 100516x.140 406x3.6 722 740 728 747 737 75816x.155 406x3.9 737 757 744 766 755 77816x.165 406x4.2 749 771 757 780 769 79416x.187 406x4.7 820 845 830 855 841 87116x.220 406x5.6 850 879 860 891 875 90916x.250 406x6.4 877 910 889 924 907 94418x.140 457x3.6 828 849 836 857 846 87018x.155 457x3.9 865 888 874 899 886 91218x.165 457x4.2 879 904 888 914 902 93018x.187 457x4.7 957 985 967 997 981 101418x.220 457x5.6 990 1024 1002 1037 1020 105818x.250 457x6.4 1022 1059 1035 1075 1055 109820x.140 508x3.6 930 953 938 962 949 97620x.155 508x3.9 962 987 971 999 985 101420x.165 508x4.2 977 1005 987 1016 1002 103420x.187 508x4.7 1080 1112 1092 1124 1107 114420x.220 508x5.6 1117 1155 1130 1170 1150 119320x.250 508x6.4 1153 1195 1168 1212 1190 123824x.155 610x3.9 1218 1249 1229 1263 1246 128124x.165 610x4.2 1236 1270 1249 1284 1267 130624x.187 610x4.7 1337 1376 1351 1391 1370 141524x.220 610x5.6 1383 1428 1398 1446 1422 147524x.250 610x6.4 1425 1476 1444 1498 1471 152926x.155 660x3.9 1284 1317 1296 1332 1314 135126x.165 660x4.2 1303 1339 1317 1354 1336 137726x.187 660x4.7 1406 1446 1421 1463 1440 148826x.220 660x5.6 1454 1502 1470 1521 1496 155126x.250 660x6.4 1499 1553 1519 1576 1547 160930x.187 762x4.7 1668 1715 1686 1735 1708 176430x.220 762x5.6 1724 1780 1743 1803 1773 183830x.250 762x6.4 1868 1931 1890 1957 1924 199536x.187 914x4.7 2129 2185 2150 2208 2177 224336x.220 914x5.6 2196 2262 2218 2289 2254 233136x.250 914x6.4 2258 2333 2285 2364 2325 2410
29
Green Concrete Blades — 14" to 20"WETCUT
Custom specifications and sizes available on requestSuper slurc undercut protection available at no additional charge.
GC7011 ....... Critically hard aggregate: flint; chert; trap rock; basalt
GC7111 ....... Hard aggregate; some river rock; hard granites; quartz; trap rock
GC7211 ....... Medium to hard aggregate: some granites; dense limestone
GC7511 ....... Medium to soft aggregate: some granites; limestone
GC7711 ....... Soft abrasive aggregate: sandstone; dolomite; soft limestone
GC7911 ....... Very abrasive aggregate and sand
List $Size mm GC 9,000 GC 10,000 GC 11,000
Segment Height .450 .500 .450 .500 .450 .50014x.125 356x3.2 $724 $738 $736 $751 $751 $76914x.140 356x3.6 741 758 754 772 771 79214x.155 356x3.9 781 798 795 814 813 83514x.165 356x4.2 793 812 809 830 829 85214x.187 356x4.7 836 857 853 877 875 90214x.220 356x5.6 869 896 891 919 917 94814x.250 356x6.4 902 931 925 958 956 99014x.375 356x9.5 1076 1120 1112 1160 1156 121016x.125 406x3.2 865 882 879 897 896 91816x.140 406x3.6 885 905 900 922 921 94416x.155 406x3.9 917 937 933 956 955 98116x.165 406x4.2 931 954 949 974 973 100016x.187 406x4.7 1004 1029 1024 1053 1050 108216x.220 406x5.6 1044 1075 1068 1102 1100 113616x.250 406x6.4 1082 1116 1109 1147 1145 118518x.125 457x3.2 971 989 987 1007 1006 102918x.140 457x3.6 993 1015 1010 1034 1033 105918x.155 457x3.9 1048 1070 1067 1092 1090 111918x.165 457x4.2 1064 1089 1084 1112 1110 114018x.187 457x4.7 1143 1171 1166 1197 1195 123018x.220 457x5.6 1187 1222 1215 1252 1250 129018x.250 457x6.4 1230 1267 1260 1302 1300 134520x.125 508x3.2 1130 1152 1149 1172 1171 119920x.140 508x3.6 1156 1182 1177 1204 1203 123320x.155 508x3.9 1210 1236 1232 1261 1259 129320x.165 508x4.2 1229 1258 1252 1284 1283 131820x.187 508x4.7 1335 1367 1361 1398 1395 143620x.220 508x5.6 1386 1427 1418 1462 1459 150620x.250 508x6.4 1436 1480 1471 1521 1518 1570
30
Joint Widening Blades — 12" to 20"WETCUT
Custom specifications and sizes available on request.Joint Widening Blades are normally sold in pairs.Spacers are required when pairing blades.
JW70 .......... Critically hard aggregate: flint; chert; trap rock; basalt
JW70 .......... Hard aggregate: some river rock; hard granites; quartz; trap rock
JW70 .......... Medium to hard aggregate: some granites; dense limestone
JW72 .......... Medium to soft aggregate: some granites; limestone
JW75 .......... Soft abrasive aggregate: sandstone; dolomite; soft limestone
JW79 .......... Very abrasive aggregate and sand
List $
Size mm JW 9,000 JW 10,000 JW 11,000
Segment Height .350 .350 .350
12x.125 305x3.2 $616 $624 $636
12x.187 305x4.7 686 700 716
12x.220 305x5.6 711 727 747
12x.250 305x6.4 735 752 774
12x.375 305x9.5 883 909 942
14x.125 356x3.2 755 766 780
14x.187 356x4.7 859 877 896
14x.220 356x5.6 891 910 935
14x.250 356x6.4 921 942 970
14x.375 356x9.5 1080 1113 1154
16x.187 406x4.7 980 999 1021
16x.220 406x5.6 1015 1036 1063
18x.187 457x4.7 1144 1166 1190
18x.220 457x5.6 1184 1208 1239
18x.250 457x6.4 1221 1248 1282
20x.187 508x4.7 1292 1316 1343
20x.220 508x5.6 1336 1363 1397
20x.250 508x6.4 1377 1407 1446
31
Joint Cleaning Blades; Wire Brushes; Bevel Blades; Spacers
Joint Cleaning Wire BrushesJC12 Joint Cleaning Brush
Size mm List $
12 x 3/8 x 1 305x95 $135
* Note: Net prices not discountable
DRY/WETCUT
NWJC Joint Cleaning SystemOur uniquely shaped segment allows fast removal of joint sealant and cleaning of the joint walls for resealing in one pass.
Spacers are required when pairing blades.
NWJC6 ...... Hard
NWJC8 ...... Medium to hard
NWJC10 .... Medium to soft
NWJC New Wave Joint Cleaning
Size mm List $
14x.187 356x4.7 $670
14x.250 356x6.4 $728
DRY/WETCUT
45° Bevel Bades (2 required)Spacers are required when pairing blades.
BV7408....... General purpose
BV7508 ...... Softer more abrasive concrete
BV7408 Bevel Blades
Size mm List $ Each
8x.250 203x6.4 $494
8x.375 203x9.5 $558
12x.250 305x6.4 $660
12x.375 305x9.5 $753
12x .500 305x12.7 $959
Steel Blade SpacersPart Number Size *Net
Price
SPACER60351 6" x.035"x1" DPH $12
SPACER60451 6" x.045"x1" DPH $11
SPACER60551 6" x.055"x1" DPH $12
SPACER60651 6" x.065"x1" DPH $12
SPACER60751 6" x.075"x1" DPH $12
SPACER61251 6" x.125"x1" DPH $17
Part Number Size *Net Price
SPACER62501 6" x.250"x1" DPH $22
SPACER80501 8" x.050"x1" DPH $15
SPACER80751 8" x.075"x1" DPH $16
SPACER81001 8" x.100"x1" DPH $17
SPACER81251 8" x.125"x1" DPH $18
32
Wall Saw & Hand Saw BladesWETCUT
Custom specifications and sizes available on request.Please specify machine manufacturer for flush cut arbors.
Split Segments Seg. Height .350 and .400" Fast cutting; excellent life
WP1005 Hard AggregateWP1305 Med. Hard Agg.WP1505 Soft Aggregate
Twin Segments Seg. Height .450"
Fast cutting; long lifeWT1005 Hard AggregateWT1305 Med. Hard Agg.WT1505 Soft Aggregate
Sandwich Segments Seg. Height .450"
Fast cutting; excellent lifeWS1005 Hard AggregateWS1305 Med. Hard Agg.WS1505 Soft Aggregate
List $Size mm WP WP WT WS
Segment Height .350" .400" .450" .450"20x.125 508x3.2 $624 $661 $763 $78520x.140 508x3.6 653 699 783 80520x.187 508x4.7 913 936 947 107920x.220 508x5.6 941 968 994 110820x.250 508x6.4 968 997 1038 113321x.125 533x3.2 624 661 766 80121x.140 533x3.6 653 699 786 82024x.140 610x3.6 1011 1066 1045 105424x.187 610x4.7 1133 1161 1174 119624x.220 610x5.6 1167 1199 1231 122624x.250 610x6.4 1199 1235 1286 125326x.187 660x4.7 1190 1219 1234 130026x.220 660x5.6 1226 1260 1294 133326x.250 660x6.4 1260 1298 1352 136230x.187 762x4.7 1414 1449 1466 157330x.220 762x5.6 1457 1496 1536 161230x.250 762x6.4 1582 1627 1604 164732x.187 813x4.7 1483 1518 1536 170032x.220 813x5.6 1526 1566 1607 174132x.250 813x6.4 1657 1701 1767 177636x.187 914x4.7 1818 1859 1882 210836x.220 914x5.6 1869 1916 1966 215436x.250 914x6.4 1977 2030 2109 219540x.187 1016x4.7 2546 2590 2477 295140x.220 1016x5.6 2601 2651 2568 300240x.250 1016x6.4 2651 2709 2895 341442x.187 1067x4.7 2659 2702 2741 303342x.220 1067x5.6 2712 2761 2829 308742x.250 1067x6.4 3057 3112 3214 346248x.187 1219x4.7 3282 3335 3384 355548x.220 1219x5.6 3348 3409 3493 3618
48x$.250 1219x6.4 3409 3478 3597 3674
33
Rubber Vulcanized Diamond Wire and AccessoriesWETCUT
Type ...............................SPM
Application ..................Medium hard to hard aggregate concrete with steel reinforcement
Bead Diameter ............10.5mm (0.41")
Bead Length ................7mm (0.275")
Beads Per Foot ...........13
List Price Per Foot .....$110
Crimping Sleeve for Diamond Wire
Part Number ................DM10ASCS
Net Price Each ............$2.90
34
Pavement Grinding Blades
For Cured ConcreteSpecification Selection
GR70 Critically Hard AggregateGR72 Hard AggregateGR74 Medium — Non AbrasiveGR76 Medium — AbrasiveGR78 Soft — Abrasive
Standard Sizes — Specify Head Width and Arbor; all common arbors available.
in. mm12 x 0.125 305 x 3.214 x 0.125 356 x 3.216 x 0.125 406 x 3.218 x 0.125 457 x 3.2
Series Relative Diamond Content
10,000 Series 9,000 Series 8,000 Series 7,000 SeriesHighest production;excellent blade life
Excellent production;excellent blade life
Fast cutting;excellent blade life
Very fast cutting;excellent blade life
GR7010 GR7009 GR7008 GR7007*GR7210 GR7209 GR7208 GR7207*GR7410 GR7409 GR7408* GR7407GR7610 GR7609* GR7608 GR7607
GR7810* GR7809 GR7808 GR7807
10,000
9,000
8,000
7,000
WETCUT
10,000 Series 9,000 Series 8,000 Series 7,000 SeriesHighest production;excellent blade life
Excellent production;excellent blade life
Fast cutting;excellent blade life
Very fast cutting;excellent blade life
GR7510 GR7509 GR7508 GR7507*GR7710 GR7709 GR7708 GR7707*GR7910 GR7909 GR7908* GR7907GR8210 GR8209* GR8208 GR8207
GR8510* GR8509 GR8508 GR8507
* Recommended specification and series based on our experience in these aggregates.
For AsphaltSpecification Selection
GR75 Critically Hard AggregateGR77 Hard AggregateGR79 Medium — Non AbrasiveGR82 Medium — AbrasiveGR85 Soft — Abrasive
Standard Sizes — Specify Head Width and Arbor; all common arbors available.
in. mm12 x 0.125 305 x 3.214 x 0.125 356 x 3.216 x 0.125 406 x 3.218 x 0.125 457 x 3.2
Series Relative Diamond Content10,000
9,000
8,000
7,000
WETCUT
35
Pavement Grooving Blades
For Cured ConcreteSpecification Selection
GV70 Critically Hard AggregateGV72 Hard AggregateGV74 Medium — Non AbrasiveGV76 Medium — AbrasiveGV78 Soft — Abrasive
Standard Sizes — Specify Head Width and Arbor; all common arbors available.
Series Relative Diamond Content10,000
9,000
8,000
7,000
10,000 Series 9,000 Series 8,000 Series 7,000 SeriesHighest production;excellent blade life
Excellent production;excellent blade life
Fast cutting;excellent blade life
Very fast cutting;excellent blade life
GV7010 GV7009 GV7008 GV7007*GV7210 GV7209 GV7208 GV7207*GV7410 GV7409 GV7408* GV7407GV7610 GV7609* GV7608 GV7607
GV7810* GV7809 GV7808 GV7807
WETCUT
GV75 Critically Hard AggregateGV77 Hard AggregateGV79 Medium — Non AbrasiveGV82 Medium — AbrasiveGV85 Soft — Abrasive
* Recommended specification and series based on our experience in these aggregates.
For AsphaltSpecification Selection
Standard Sizes — Specify Head Width and Arbor; all common arbors available.
Series Relative Diamond Content10,000
9,000
8,000
7,000
in. mm12 x 0.110 305 x 2.812 x 0.125 305 x 3.212 x 0.230 305 x 5.812 x 0.250 305 x 6.414 x 0.125 356 x 3.214 x 0.230 356 x 5.814 x 0.250 356 x 6.4
10,000 Series 9,000 Series 8,000 Series 7,000 SeriesHighest production;excellent blade life
Excellent production;excellent blade life
Fast cutting;excellent blade life
Very fast cutting;excellent blade life
GV7510 GV7509 GV7508 GV7507*GV7710 GV7709 GV7708 GV7707*GV7910 GV7909 GV7908* GV7907GV8210 GV8209* GV8208 GV8207
GV8510* GV8509 GV8508 GV8507
WETCUT
in. mm12 x 0.110 305 x 2.812 x 0.125 305 x 3.212 x 0.230 305 x 5.812 x 0.250 305 x 6.414 x 0.125 356 x 3.214 x 0.230 356 x 5.814 x 0.250 356 x 6.4
36
RST — One Pass, One Piece Joint Sawing and Widening System
WETCUT
U.S.PATENT NO. 4960487, NO. 5385768
1st ....... Specify Reservoir Width, W
2nd ...... Specify Reservoir Depth, D
3rd ....... Specify Control Joint depth, J
4th ....... Specify Material to be Cut: Green Concrete, Asphalt
5th ....... Choose size from below chart which best fits the job specification
RST Size Selection Chart
RST Size Selection (See diagram)
Green Concrete — Wet Cutting
Width RST-1 RST-2 RST-3 RST-4
3/8" $1605 $1535 $1605 $1465
1/2" $1646 $1555 $1670 $1500
5/8" $1680 $1630 $1705 $1600
Asphalt — Wet/Dry Cutting
Width RST-1 RST-2 RST-3 RST-4
3/8" $1620 $1535 $1615 $1465
1/2" $1675 $1590 $1688 $1522
5/8" $1715 $1625 $1725 $1530
W
JD
Reservoir Specification/Joint Depth, JWidth, W Depth, D RST-1 RST-2 RST-3 RST-4 RST-5
1/4" 3/8" 1/2" 5/8" 1/2" 2" 2 3/8" 2 3/4" 1 3/4" 3 5/16"1/4" 3/8" 1/2" 5/8" 3/4" 2 1/4" 2 5/8" 3" 2" 3 9/16"1/4" 3/8" 1/2" 5/8" 1" 2 1/2" 2 7/8" 3 1/4" 2 1/4" 3 13/16"1/4" 3/8" 1/2" 5/8" 1 1/4" 2 3/4 " 3 1/8" 3 1/2" 2 1/2" 4 1/16"1/4" 3/8" 1/2" 5/8" 1 1/2" 3" 3 3/8" 3 3/4" 2 3/4" 4 5/16"1/4" 3/8" 1/2" 5/8" 1 3/4" 3 1/4" 3 5/8" 4" 3" 4 9/16"
Core Diameter 9.250" 13.500/10.5" 12.875" 13.500" 11.750" 17.500/12"
37
SITS — Three Piece — “T” Joint BladesWETCUT
Reservoir Specification/Joint Depth, J
Width, W Depth, D SITS-1 SITS-2 SITS-3 SITS-4 SITS-5
3/8" 1/2" 5/8" 3/8" 1 3/8" 1 5/8" 1 7/8" 2 1/8" 2 3/8"
3/8" 1/2" 5/8" 1/2" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2"
3/8" 1/2" 5/8" 3/4" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4"
3/8" 1/2" 5/8" 1" 2" 2 1/4" 2 1/2" 2 3/4" 3"
3/8" 1/2" 5/8" 1 1/4" 2 1/4" 2 1/2" 2 3/4" 3" 3 1/4"
3/8" 1/2" 5/8" 1 1/2" 2 1/2" 2 3/4" 3" 3 1/4" 3 1/2"
Core Diameter 9.250" 11.250" 11.750" 12.250" 12.750" 13.250"
Blade Selection Chart
W
DJ
1st ....... Specify Reservoir Width, W
2nd ...... Specify Reservoir Depth, D
3rd ....... Specify Control Joint depth, J
4th ....... Specify Material to be Cut: Green Concrete, Asphalt
5th ....... Choose size from below chart which best fits the job specification
SITS Size Selection (See diagram)
Green Concrete - Wet Cutting
Width SITS-1 SITS-2 SITS-3 SITS-4 SITS-5
3/8" $1830 $1830 $1830 $1910 $1910
1/2" $1900 $1900 $1900 $1980 $1980
5/8" $1945 $1945 $1945 $2025 $2025
Asphalt - Wet/Cutting
Width SITS-1 SITS-2 SITS-3 SITS-4 SITS-5
3/8" $1840 $1840 $1840 $1920 $1920
1/2" $1915 $1915 $1915 $1995 $1995
5/8" $1960 $1960 $1960 $2040 $2040
U.S.PATENT NO. 5197453
38
WETCUT
Blade Selection Chart
1st ....... Specify Reservoir Width, W
2nd ...... Specify Reservoir Depth, D
3rd ....... Specify Control Joint depth, J
4th ....... Specify Material to be Cut: Green Concrete, Asphalt
5th ....... Choose size from below chart which best fits the job specification
SITS Size Selection (See diagram)
Green Concrete and Asphalt Wet SITS-S
1/2" $1565
5/8" $1675
U.S.PATENT NO. 5197453
SITS-S — Shallow Joint Three Piece Sawing System
Reservoir Joint
Width, W Depth, D Depth, J
1/2" 5/8" 3/8" 7/8"
1/2" 5/8" 5/8" 1-1/8"
1/2" 5/8" 7/8" 1-3/8"
1/2" 5/8" 1-1/8" 1-5/8"
1/2" 5/8" 1-3/8" 1-7/8"
1/2" 5/8" 1-5/8" 2-1/8"
Core Diameter 10.950" 11.750"
The SITS-S One Pass System step cut blades are a more efficient method to saw joints and sealant reservoirs. This unique design includes the control joint and widening operation in a single pass in asphalt and green concrete. The reservoir is centered over the control joint cut without spalling or raveling. Dry cutting blades are available for asphalt applications.
W
DJ
A majority of the problems experienced by diamond blade end users are the result of:a. Choosing the wrong blade for the job.b. Improper use of blade.c. Equipment failure or improperly maintained equipment.Below are some examples of common problems experienced by end users.
Blade wobbles (loss of tension) a. Blade is too hard for material. Creates excessive
stress on steel core. Check with manufacturer if blade is suitable for material.
b. Blade shaft of saw is misaligned. Causes steel core to become bowed. Check saw for proper blade shaft alignment.
c. Blade flanges are worn and undersized. Insufficient clamping area to keep blade strait. Replace blade flanges with manufacturers recommended parts only.
d. Blade flanges, both inner and outer are different diameters. Causes steel core to bow. Replace blade flanges with manufacturers recommended parts only.
e. Saw operator is attempting to cut full depth in one pass. Causes blade to stop cutting creating excessive stress on steel core resulting, in loss of tension.
Lower blade to a depth that allows the saw to cut at a forward speed of 8 to 10 feet per minute without the blade lifting out of the cut. This is step cutting, which requires making multiple passes at progressive depths. Step cutting is more time and cost effective than cutting full depth in one pass.
f. Blade core is overheating due to lack of adequate coolant.
Check water supply system for even water flow or blockages to both inner and outer sides of blade.
Diamond Blade Troubleshooting Guide
When dry cutting, make more shallow intermittent cuts to allow more time for air to cool the blade.
Undercutting Undercutting is a condition in which the steel core where the segments and core are joined wears faster than the segment. This condition results from highly abrasive materials such as sand generated by the sawing operation grinding against the blade.a. Lack of sufficient water to flush away cuttings.
Increase water flow to blade. Check for blocked water supply tubes.
b. Allowing blade to cut through material into sub-base material. Set cutting depth slightly less than or equal to the total depth of slab.
c. Lack of sufficient undercut protection on steel core. When ordering blades from your supplier, request undercut protection. Multiquip provides undercut protection at no additional charge. Types of undercut protection offered are shown below.
Steel Core and Segment Cracks a. Blade is too hard for material. Creates excessive stress
on steel core and segment. Check with manufacturer if blade is suitable for material being cut.
b. Exceeding recommended operating speed. Will cause blade to cut slower and create excessive stress on core. Always operate blades at manufacturer's recommended R.P.M. Refer to A.N.S.L code B71 & B75.
c. Blade core is overheating due to lack of adequate coolant. Check water supply system for even water flow or blockages to both inner and outer sides of blade. When dry cutting, make more shallow intermittent cuts to allow more time for air to cool the blade.
d. Saw operator is attempting to cut full depth in one pass. Causes blade to stop cutting creating excessive stress on steel core resulting in loss of tension and core cracks. Lower blade to a depth that allows the
Super Slurc Slurc
39
Diamond Blade Troubleshooting Guide
saw to cut at a forward speed of 8 to 10 feet per minute without the blade lifting out of the cut. This is step cutting, which requires making multiple passes at progressive depths. Step cutting is more time and cost effective than cutting full depth in one pass.
Blade Out of Round a. Blade is too hard for material. Creates excessive
stress on steel core. Check with manufacturer if blade is suitable for material.
b. Worn blade shaft bearings. Causes blade shaft to turn eccentrically resulting in blade wearing out of round. Replace blade shaft bearings. This condition most often occurs when bearing lubrication is neglected.
c. Blade shaft scored due to blade spinning between flanges. Causes blade to turn eccentrically resulting in blade wearing out of round. Condition is normally occurs when drive or safe pin is broken or missing. Replace blade shaft, possibly bearings, inner and outer blade flanges and drive pin.
Arbor Hole Out of Round a. Blade shaft scored due to blade spinning between
flanges. Causes blade to turn eccentrically resulting in blade wearing out of round. Condition normally occurs when drive or safe pin is broken or missing. Replace blade shaft, possibly bearings, inner and outer blade flanges and drive pin.
b. Blade flanges improperly tightened allowing blade to rotate on shaft. Check for damage to mounting shaft and replace if damaged. Always make sure blade is properly secured with blade wrench, never hand tighten.
Blade not Cutting a. Blade is too hard for material. Using asphalt blade
to cut concrete or block blade on hard brick. Check with dealer or manufacturer if blade is suitable for material you are cutting.
b. Saw operator is attempting to cut full depth in one pass. Causes blade to stop cutting due to lack of diamond exposure due to insufficient power. Lack of power could also be due to loose V-belts, loss of engine compression, inadequate voltage or exceeding manufacturers recommended R.P.M. Lower blade to a depth that allows the saw to cut at a forward speed of 8 to 10 feet per without the blade lifting out of the cut. Check belts and replace if worn. Have mechanic check if engine compression is within manufacturers specifications. Make sure extension cords are rated properly for tool HP and amperage.
Segment Loss a. Material being cut is not held securely causing blade
to twist and jamb in cut. Secure material during cutting. Maintain firm grip on cutting tool.
b. Worn or debris covered blade flanges provide insufficient clamping to support blade causing it to deflect. Make sure flanges are free of debris when mounting blade. Replace flanges if worn or undersize.
c. Blade is too hard for material. Using asphalt blade to cut concrete or block blade on hard brick. Check with dealer or manufacturer if blade is suitable for material you are cutting.
d. Worn blade shaft bearings or scored blade shaft. Causes blade shaft to turn eccentrically, wearing blade out of round and causing blade to pound, resulting in segment loss. Replace blade shaft bearings or blade shaft.
e. Blade overheated resulting in a blue color on the steel core in the area where segment is mounted. Check water supply system for even water flow or blockages to both inner and outer sides of blade. Check if mechanical water pump is functioning properly and supply hose is not kinked. When dry cutting, make more shallow intermittent cuts to allow more time for air to cool the blade. Every few minutes allow blade to spin freely in order to cool.
40
Make sure to always secure drill stand with a mechanical anchor, vacuum system, or ceiling jack.
DO NOT stand on the base and proceed to drill without anchoring. VACUUM BASES are designed to accommodate a maximum of 6" diameter core bits. LEVEL the drill stand by using a level on the mast and adjusting the leveling screws on the four corners of the mast.
Turn on the water supply before starting the drill motor. DO NOT let the bit spin in the hole without applying pressure. Apply even pressure when drilling. When drilling through STEEL REINFORCEMENT or REBAR reduce the downward pressure and allow the bit to cut at its own rate. DO NOT FORCE the bit.
Also it is helpful with a multiple speed unit, to first stop the motor then switch to a slower speed.
Drilling in concrete with very hard aggregate or high PSI concrete may cause the bit to glaze over or stop cutting. When this occurs several methods can be used to help open up or redress the bit.
If possible, switch drill motor to a slower speed. Reduce the water flow by half for a few minutes to allow more of the material generated by the cutting action to build up in the cut. As the bit begins to open up or pick up speed, increase the water flow gradually. Sand can be added to the slurry. Then repeat the above procedure.
Upon completion of drilling, back the core bit out of the hole with the motor running and reduce the water flow.
Diamond Core Drilling Tips
Size Ideal RPM Min. RPM Max. RPM1" 3182 2387 3980
1¼" 2545 1910 31841½" 2121 1592 26531¾" 1818 1364 22742" 1591 1194 1990
2½" 1273 955 15923" 1061 796 1327
3½" 909 682 11374" 795 597 995
4¼" 749 562 9374½" 707 531 8845½" 579 434 7246" 530 398 663
6¼" 509 382 6376½" 490 367 6127" 455 341 5698* 398 298 4989" 354 265 44210" 318 239 39811" 291 219 36512" 265 199 33214" 227 171 284
Core Bit RPM Chart
41
Technical Information
Maximum Safe Blade SpeedDiameter Max. Safe RPMInches mm
4" 102 15,2804½" 114 13,5805" 127 12,2256" 152 10,1857" 178 8,7308" 203 7,6409" 229 6,780
10" 254 6,11512" 305 5,09512" 305 6,300 (HS)14" 356 3,82014" 356 5,400 (HS)16" 406 3,82016" 406 4,500 (HS)18" 457 3,39520" 508 3,05522" 559 2,78024" 610 2,55026" 660 2,35028" 711 2,18530" 762 2,04032" 813 1,91036" 914 1,70042" 1067 1,45548" 1219 1,275
** Based Upon ANSI B7.1 & B7.5 guidelines for maximum safe/never exceed speeds. Before cutting operations ensure that the actual blade shaft (arbor) speed of the tool is within the "Maximum Safe Speed (RPM)" of the blade.
HS = For High Speed Cut-Off Saws
Wet Cutting — Water for Cooling the BladeDiamond Blades classified as WET cutting MUST be used with water to reduce the extreme heat that builds up during operations. Water also reduces dust and helps remove cutting residue. Operating a WET blade without water will cause damage to the blade, and creates a safety hazard. A continuous flow of water to both sides of the blade/core bit is critical to safe, effective cutting operations.
Dry Cutting — Air or Water for Cooling the BladeDiamond Blades classified as DRY cutting utilize the circular speed airflow around the blade to prevent extreme heat build-up. Using a technique of intermittent sawing and shallow depths help ensure sufficient cooling intervals. Also, water may be used as a blade coolant, and to aid in minimizing dust being generated.
42
Mohs Hardness
Aggregate Type
8
7
6
5
4, 3
Critically Hard Aggregate — Flint...Chert
Hard Aggregrates — Hard Gravels...Quartz...Some Granites
Medium Hard Aggregrates — Medium Gravels...Granites...Traprock
Medium-Soft Aggregrates — Medium Hard Limestone
Soft Aggregrates — Soft Limestone...Slag...Dolomite
© Multiquip Inc.
Your Multiquip dealer is:
Rev
. (05
0415
)
multiquip.com
Rammers
© Multiquip Inc.
*Enginepowerratingsarecalculatedbytheindividualenginemanufacturerandtheratingmethodmayvaryamongenginemanufacturers.MultiquipInc.anditssubsidiarycompanies makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoeverwithrespecttotheaccuracyoftheenginepowerrating.Usersareadvisedtoconsulttheenginemanufacturer’sownersmanualanditswebsiteforspecificinformation regarding the engine power rating.
Model MTR40SF MTX60HD MTX60SD MTX70HD MTX70SD MTX80SD
ImpactForcelbs(kN) 1,215 (5.4)
3,064(13.6)
3,064(13.6)
3,350 (14.9)
3,350 (14.9)
3,505 (15.6)
ShoeJumpHeightin.(mm) 2.2(55) 3.1(80) 3.1(80) 3.1(80) 3.1(80) 3.1(80)
Blows Per Minute 695 Up to 695 Up to 695 Up to 690 Up to 690 Up to 678
TravelSpeedft./min(m/min) 30(9) 55.8(17) 55.8(17) 55.8(17) 55.8(17) 49.2(15)
Engine Make/Model Subaru EH09
Honda GX100
Subaru ER12
Honda GX100
Subaru ER12
Subaru ER12
EnginePowerHP(kw)* 2.4(1.8) 2.8(2.1) 3.5(2.6) 2.8(2.1) 3.5(2.6) 3.5(2.6)
Engine RPM 4,100 4,100 4,100 4,100 4,100 4,100
FuelTankCapacityqt.(L) 2.1(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2) 2.5(2)
Start Method Recoil Recoil Recoil Recoil Recoil Recoil
OverallLengthin.(mm) 24.5(623) 28.1(713) 28.1(713) 31.0(788) 31.0(788) 31.0(788)
OverallWidthin.(mm) 13.8(350) 13.8(350) 13.8(350) 13.8(350) 13.8(350) 14.4(365)
OverallHeightin.(mm) 43.7(1109) 38.8(985) 38.8(985) 39.4(1000) 39.4(1000) 39.4(1000)
ShoeWidthin.(mm) 5.9(150) 10.4(265) 10.4(265) 11.2(285) 11.2(285) 11.2(285)
ShoeLengthin.(mm) 10.6(270) 13.4(340) 13.4(340) 13.4(340) 13.4(340) 13.4(340)
OperatingWeightlbs.(kg) 101(46) 141(64) 141(64) 165(75) 165(75) 181(82)
Model Shoe Width MTR40SF MTX60 MTX70 MTX80 MTX90
355XA 4" 3
460XA 4.5" 3
485XA 4.5" 3 3 3
660X 6.5" 3685XA 6.5" 3 3 3
Allfeaturesandspecificationsaresubjecttochangewithoutnotice.
Your Multiquip dealer is:
Optional Foot Assemblies - ForNarrowTrenches
Specifications
Connect with us on
multiquip.com
Rev
.(09/12
)
WARRANTY: Rammers - 1 year parts and service. Honda GX100 engine - 3 years. Subaru ER12 engine - 3 years. Please consult engine manufacturers for warranty details and updates.
6.5"WXA = All steel
6.5"WX = Steel and wood
Connect with us
Diamond Blade Technical Information
Aggregate Map of the United States