2015 utsr fellowship
TRANSCRIPT
![Page 1: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/1.jpg)
This presentation is intended only for the individual or entity to which it is addressed and may contain information that is the Confidential and/or Proprietary Information of
Woodward, Inc., the disclosure of which may be in violation of applicable law. If you are not the intended recipient, or an employee or agent responsible for delivery to the
intended recipient, you are hereby notified that any dissemination, distribution, or copying of this message is strictly prohibited and you are requested to notify us
immediately by telephone.
Industrial Turbomachinery Systems
2015 UTSR Fellowship
Dean Sage
July 25th, 2015
![Page 2: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/2.jpg)
Industrial Turbomachinery Systems
Background
School: University of Florida
Materials Science and Engineering
Agricultural and Biological Engineering
Department: NPI Engineering
Supervisor: Mark Dieringer
2
Proprietary Information
●●●
![Page 3: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/3.jpg)
Industrial Turbomachinery Systems
Where I’m From
• If you go far enough south, you get back to the North
3
Proprietary Information
●●●
![Page 4: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/4.jpg)
Industrial Turbomachinery Systems
It’s not like the South.
4
Proprietary Information
●●●
![Page 5: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/5.jpg)
Industrial Turbomachinery Systems
Main Projects
• Weld Issues
• Igniter Failures
• Greenbelt Projects
5
Proprietary Information
●●●
![Page 6: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/6.jpg)
Weld Issues
6
![Page 7: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/7.jpg)
Industrial Turbomachinery Systems
Derek P.
• Undercut in 316 SS bar-tube welds
• Tail off cracks in 304-HastX welds
7
Proprietary Information
●●●
![Page 8: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/8.jpg)
Industrial Turbomachinery Systems
Undercut
8
Proprietary Information
●●●
![Page 9: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/9.jpg)
Industrial Turbomachinery Systems
Undercut Cont.
• Geometric and microstructural differences in tube and
bar stock, among other factors, cause undercut with this
material combination.
• Solution: Change weld parameters
Weld Pass:
- Decrease amperage and travel speed by ~35%
Cap Pass:
- Defocus beam ~15%
- Change beam figure
- Increase beam width ~10%
- Decrease travel speed ~35%
9
Proprietary Information
●●●
![Page 10: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/10.jpg)
Industrial Turbomachinery Systems
Undercut Cont.
10
Proprietary Information
●●●
![Page 11: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/11.jpg)
Industrial Turbomachinery Systems
Tail off Cracks in 304-HastX Welds
11
Proprietary Information
●●●
![Page 12: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/12.jpg)
Industrial Turbomachinery Systems
Tail off Cracks Cont.
• Weld puddle carries impurities, causing for a higher
concentration where the weld ends.
• Higher concentration of impurities causes cracking.
• Solution (1): Shorten tail off area
• Solution (2): Guide “contaminated” weld puddle away
from joint, machine off impurities.
12
Proprietary Information
●●●
![Page 13: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/13.jpg)
Industrial Turbomachinery Systems
Mark B.
• “Black stripe” issue in qualification of weld joint
13
Proprietary Information
●●●
![Page 14: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/14.jpg)
Industrial Turbomachinery Systems
Black Stripe
• “Black stripe” appears in weld qualification with no
precedent.
14
Proprietary Information
●●●
![Page 15: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/15.jpg)
Industrial Turbomachinery Systems
Black Stripe Cont.
• Solutions:
Change part geometry
Modify weld parameters
Work with XRI to further interpret x-ray images
Let Derek deal with it
15
Proprietary Information
●●●
![Page 16: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/16.jpg)
Industrial Turbomachinery Systems
Black Stripe cont.
• Before:
16
Proprietary Information
●●●
![Page 17: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/17.jpg)
Industrial Turbomachinery Systems
Black Stripe cont.
• After:
17
Proprietary Information
●●●
![Page 18: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/18.jpg)
Igniter Failures
18
![Page 19: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/19.jpg)
Industrial Turbomachinery Systems
Mike H.
• Igniter Shell Failure
• Igniter Glass Flow Issue
19
Proprietary Information
●●●
![Page 20: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/20.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure
Materials:Tube (light green): 304 ss
Shell (red): 430 ssCollar (pink): 304 ss
![Page 21: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/21.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
21
Proprietary Information
●●●
![Page 22: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/22.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
22
Proprietary Information
●●●
![Page 23: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/23.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
• Failure of 430 SS shell near 304L-430 weld joint.
• 430 SS failed, not the weld.
• Igniters had been subjected to 12,000 hours of operation
with 400 starts.
• High temperatures for prolonged periods of time.
• Failure analysis conducted by Tripti Jain in Rockford
facility.
23
Proprietary Information
●●●
![Page 24: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/24.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
24
Proprietary Information
●●●
![Page 25: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/25.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
• Polishing the fractured area revealed enlarged grains
and thick boundaries
25
Proprietary Information
●●●
![Page 26: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/26.jpg)
Industrial Turbomachinery Systems
Igniter Shell Failure Cont.
26
Proprietary Information
●●●
• SEM (Scanning Electron Microscope) and EDS (Energy
Dispersive x-ray Spectroscopy) analysis revealed
chromium deposits between grains, effectively making
the material more brittle.
• Conclusion:430ss should not be used in this application.
![Page 27: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/27.jpg)
Industrial Turbomachinery Systems
Igniter Glass Flow Issue
• Glass seals in igniters are softening in service, flowing
away from designated areas, and allowing other internal
fixtures of the igniter to break.
27
Proprietary Information
●●●
![Page 28: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/28.jpg)
Industrial Turbomachinery Systems
Igniter Preliminary Results Showing Potential from Ceramic Fracture
Temperature-DEG F Von Mises Equivalent Stress –PSI
Temperature-DEG FVon Mises Equivalent Stress –PSI
DESIGN CONFIGURATION
DIFFUSED GLASS CONFIGURATION@6000SEC
• Finite analysis
investigation
of thermal
stresses seen
in igniters
• Glass seal to
be replaced
with higher
temperature
resistant glass
Igniter Glass Flow Issue Cont.
![Page 29: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/29.jpg)
Greenbelt Projects
29
![Page 30: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/30.jpg)
Industrial Turbomachinery Systems
Melissa H.
• Outer bellows weld porosity
30
Proprietary Information
●●●
![Page 31: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/31.jpg)
Industrial Turbomachinery Systems
Outer Bellows Porosity
• Porosity and lack of penetration causing weld to fail in
XRI.
• Objective of project is to reduce number of failed parts.
31
Proprietary Information
●●●
![Page 32: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/32.jpg)
Industrial Turbomachinery Systems
Outer Bellows Porosity Cont.
• Proposed solutions (project still in progress):
Automate weld prep/ pre weld cleaning processes
Change weld schedule
32
Proprietary Information
●●●
![Page 33: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/33.jpg)
Used Processes
33
![Page 34: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/34.jpg)
Industrial Turbomachinery Systems
Used Processes
• Optical Microscopy
• TIG/ GTAW Welding
• EB Welding
• CMM
• Visual Measurement
System
• Perthometry
• Lathes
• Saws
• Laser Marker
• Vibrapene
• X-Ray Inspection
• FPI
• Flow Testing (Air &
Calibration Fluid)
• Resistance/ Spot tacking
• Mounting
• Polishing
• Etching
• Laser Tacking
• Drop Testing
• Six Sigma Statistical
Analysis
34
Proprietary Information
●●●
![Page 35: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/35.jpg)
Industrial Turbomachinery Systems
Questions?
35
Proprietary Information
●●●
![Page 36: 2015 UTSR Fellowship](https://reader031.vdocuments.net/reader031/viewer/2022022007/6210887ef7bfda02d949c8b8/html5/thumbnails/36.jpg)