2017 brochure - privarsa2017 brochure micro tig welding page 2 ultrasonic polishing page 5 new...

PRECISION FINISHING SUPPLIESPRECISION FINISHING SUPPLIES

New Products Inside!

2017 BROCHURE

Micro TIGWelding

PAGE 2

UltrasonicPolishing

PAGE 5

New PolishingKitsPAGE 7

PAGE 8

Nylon / TampicoBrushes

PAGE 9 PAGE 10

New Inox Carbide Burs

Heavy-dutyFlexible Shafts

PUK U4 Flat RepairPUK U4 Preview

See videos atwww.gesswein.com

PUK U4 PreviewVirtual Demonstration

PUK U4 Power Mold & DieIncorporating the latest technology, the PUK U4 offers an easy-to-use solution for precision mold and die repairs. Utilizing micro TIG technology, the welder produces small, consistent spot welds that penetrate the mold surface. The welded areas are strong and can withstand the pressures and working conditions during the molding, stamping, and metal injection process. All heat is concentrated at the spot of the weld, thereby eliminating the possibility of distortion and metal stress caused by overheating.

Applications• Repairing parting lines, mold seams, and three point

corners and edges• Filling in pores and deep scratches on the mold surface• Weld into slots, corners, and ribs• Repair slides, ejectors, and core pins

Pre-Programmed SettingsFor Steel, Aluminum, and CopperTake the guess work out! Simply select the pre-program for your mold repair application and start welding! On the touch screen, select steel, aluminum, or copper. Then select the setting for flat surface, edge, corner, rib, or three-corner edge and start welding! Or if you prefer, manually override the pre-programmed settings to dial in your preferred setting.

Keep your mold repairs in house!

Precision welding made easyThe PUK U4 Power Mold & Die

Save Time & Money!

STEEL ALUMINUM COPPER

830-0944(Complete Package shown)

$8,495.00

2017 Brochure | 888.547.8555 | www.gesswein.com 2

PUK U4 Flat RepairPUK U4 Preview

See videos atwww.gesswein.com

PUK U4 PreviewVirtual Demonstration

Included ComponentsThis system comes complete with microscope, LED light, electrode handpiece, set of 0.6mm and 0.8mm electrodes, electrode sharpener, ground cables, argon gas regulator, tack resistance welder and foot pedal.

The MicroscopeMagnet Base — Connect Anywhere!Weld anywhere on any type of mold large OR small! The adjustable and magnetic microscope base affixes to any metal surface. The microscope arm is extremely flexible to allow for comfortable welding on almost any mold surface. Keep the microscope at your bench or take it to the mold for a quick in-press repair. The 10X microscope comes complete with integrated LED lighting for proper illumination of the welding surface. A protective eye shutter is built into the microscope for additional eye protection. Field of view 20mm.

PUK U4 Welding WireWelding wire for the PUK U4 Power. Wire available in 9" or 18" length, and diameters ranging from 0.05" to 0.030". Sold in packages of 25, except for 7075 and D-2 which are sold in packages of 30.

Tack WelderTack weld wire to surface prior to weld-ing. Holds wire in place which also serves to protect mold surface.

The Electrode SharpenerThe diamond disc rotates when the button is pressed, allowing for quick and convenient electrode sharpening.

Electrode Set0.6mm and 0.8mm electrodes included in package. Use 0.8mm electrode for welding larger diameter wire.

Easy to position!Microscope can connect

directly to your mold base.

SS420, SS316, H-13, S-7, P-20, A-2, M-2, D-2, Aluminum 7075 and 4043, Beryllium Copper and more!

Available Materials!


TURBO AIR LAPPERS TURBO AIR LAPPERS

For polishing ribs and slots

A

B

C

D

E

F

G

H

I

J

K

3~2

3~2

4~2

10

10

8

8

6

4

4~3

4~3

UTR-120 // 1.2mm Stroke



NEW! Turbo Lap Diamond FilesThese diamond files are perfect for finishing in tight areas. The high quality diamond abrasive performs well in high speed and short stroke applications. Each diamond file has maximum thickness of 1mm and tapers down to 0.5mm thick. Each style is available in three grits.

Turbo Air LappersThese extremely popular air driven lappers are low-vibration, quiet-running, and durable with a fast, short stroke. Perfect for polishing ribs, slots, and other tight areas. Produces great results with the Turbo Lap Diamond Files and NSS Ceramic Stones. All handpieces are color coded to identify stroke length – 0.3mm, 0.7mm, or 1.2mm. UTR lappers are made in Taiwan and require oil. UHT lappers are made in Japan and do not require oil.

Style Length: Total x Abrasive (mm) Size 120 Grit 200 Grit 400 Grit

A 60 x 25 3~2* 241-0640 241-0641 241-0642

B 70 x 40 4~2* 241-0644 241-0645 241-0646

C 60 x 25 4~2* 241-0648 241-0649 241-0650

D 60 x 25 4~3* 241-0652 241-0653 241-0654

E 70 x 40 4~3* 241-0656 241-0657 241-0658

F 60 x 25 4 241-0660 241-0661 241-0662

G 70 x 40 6 241-0664 241-0665 241-0666

H 70 x 40 8 241-0668 241-0669 241-0670

I 90 x 60 8 241-0672 241-0673 241-0674

J 70 x 40 10 241-0676 241-0677 241-0678

K 90 x 60 10 241-0680 241-0681 241-0682

*Tapered width

UM-1200The most affordable ultrasonic polisher for polishing with diamond tools and ceramic stones. The high quality UM-1200 produces 25,000 cycles per second of longitudinal vibration in a small, comfortable handpiece with a minute stroke of 10 to 35 microns from low to high output levels.

Ultramax DFUltramax DF gives you the versatility of both ultrasonic and mechanical applications. Ultramax DF accommodates the UF-9700 ultrasonic handpiece (included) and Gesswein's entire line of Power Hand 3 mechanical handpieces. (PH3 Adapter required. Item# 510-3304)

500-1200 500-0210

Ultrasonic only 45 Watts of power

850-2250

850-2245

850-2251

0.7mm Stroke // UHT Ushio // RED

1.2mm Stroke // UHT Ushio // YELLOW

0.3mm Stroke // UHT Ushio // BLUE

850-0930

850-0928

850-0932

Ultrasonic Polishers

$1,495.00 $5,395.00

$318.00

$318.00

$318.00

$425.00

$425.00

$425.00

$7.25 each


TURBO AIR LAPPERS

New Touch Screen!

Rotary Handpiece50,000rpm - Brushless

BH-60 is a high-torque brushless rotary handpiece with a quick release collet mechanism. Adjustable speed up to 50,000rpm. Forward or reverse directional rotation. Supplied with 1⁄8" collet.

Reciprocating ProfilerAdjustable Stroke – Minimal Vibration

Z-2X Reciprocating Profiler has a 0-2.0mm adjustable length of stroke with a variable strokes per second rate up to 117.

Z-6X Reciprocating Profiler has a 0-6.0mm adjustable length of stroke with a variable strokes per second rate up to 70.

Ultrasonic Handpiece36 Watts - 25,000 Strokes per Sec.

The 36W MF Ultrasonic Handpiece comes with one flat 1mm tool holder and two round 3mm tool holders. Use with ceramic stones, diamond files, and metal and wood laps.

Ultramax MF TOUCH 3-in-1 Complete PackageThe Ultimate Mold Finishing MachineThe Ultramax MF utilizes a high-efficiency microprocessor to deliver power to ultrasonic, brushless DC, and brush-type DC handpieces. The 3-in-1 Complete Package includes: Ultramax MF Touch, BH-60 Rotary Handpiece, Z-2X or Z-6X Profiler, and a convenient metal cabinet. For precision polishing work, this is the most comprehensive system available.

Included Handpieces

3-in-1 Consumables Set!For the Ultramax MF Touch

This set contains 83 polishing consumables specifically selected for the Ultramax MF Polisher 3-in-1 Complete package. Provides the full range of abrasive consumables from aggressive polishing and grinding, up to diamond and mirror polishing. Keep your tools in the convenient carrying case or store in the MF metal cabinet.

Set includes your choice:

Z-2X OR Z-6X

• 11 Ceramic Stones• 6 Diamond Files• Stone Holder• Diemaker & EDM All Grit Sets• Supreme Green Stoning Oil

• 6 Diamond Compounds• Felt Bobs Hard & Soft• Cup, Wheel & End Brushes• Mounted Stones• GMX Mounted Points

Includes:

NEW!

500-0234

Complete package w/Z-6X // 500-0232

Complete package w/Z-2X // 500-0233

NEW!

$395.00

$4,395.00$4,395.00

A $200 Savings! (Versus buying items separately)


Polishing Kits

General PurposeGreat choice for P-20 steel!This soft stone acts harder due to a proprietary treatment. Experienced polishers will find this formula cuts fast, wears slowly, and holds its shape well. Made of extra-sharp pure white aluminum oxide grains in a specially formulated bond and a proprietary treatment. These finishing stones cut well, hold their shape, and resist loading.

12-Piece Finishing Stone SetsWe offer eight 12-piece stone sets of our most popular stones. Each Finishing Stone Set serves as a perfect introduction to our popular stone lines, and includes four different grits of the three most popular sizes: 1⁄4" x 1⁄8", 1⁄2" x 1⁄8", 1⁄2" x 1⁄4"; all 6" in length.

DiemakerOne of our most popular polishing stones, Gesswein Diemaker Stones combine the characteristics of fast cutting and moderate breakdown.

Grits: 220, 320, 400, 600

General PurposeThis soft stone acts harder due to a proprietary treatment. Experienced polishers will find this formula cuts fast, wears slowly, and holds its shape well.

Grits: 220, 320, 400, 600

Oil-TreatedSoaked in oil solution to prevent loading. Fast-cutting with moderate breakdown. General purpose stones often use for EDM scale removal. Can be use without stoning oil.

Grits: 220, 320, 400, 600

Premium WhiteSemi-hard, good for general-purpose mold polishing. Special treatment provides load resistance and a lubri-cating effect.

Grits: 220, 320, 400, 600

EDMContain extra-sharp, premium-grade aluminum oxide for fast cutting action. These Stones have a special clay bond so they hold their shape well for working small details and sharp corners.

Grits: 120, 180, 320, 400

MoldmakerEasy to shape stone for contour polishing. Medium-soft, non-loading and fast-cutting with rapid breakdown. Made with silicone carbide abrasive.

Grits: 220, 320, 400, 600

EDM BlueA harder formulation of our EDM stones especially designed to handle the high-speed back-and-forth motion of a profiler or ultrasonic machine.

Grits: 120, 180, 320, 400

Moldmaker PlusMade with premium green silicon carbide abrasive, Moldmaker Plus is a medium stone with slower breakdown characteristics than our standard Moldmaker stones. Can be used for aggressive aluminum polishing.

Grits: 220, 400, 800, 1200 SUPREME GREEN Stoning & Lubricating OilHealthier formulation, same performance.

Demanding standards. Exceptional quality control. Quality ingredients.For over 100 years, leading metalworkers have come to know and rely upon Gesswein for the best in abrasives. We are proud that our Gesswein stones are the unquestionable choice of leading mold and die craftsmen worldwide.

Finishing Stones

NEW!

405-2095

800-0151

405-2040405-2030 405-2010

405-2065 405-2020

405-2060 405-2090

800-01521 Pint

1 Gallon

Made in the USA

$41.00$37.00$33.00

$37.00$35.00$35.00

$49.00$45.00$44.95

$13.75


Complete Kits for Polishing On the Go!

Polishing KitsMold Repair KitGeneral Mold Repair Supplies Can be carried directly to the mold for instant repair in the press. Helps you quickly put your molds back into production.

Diamond Polishing KitEverything you need for Diamond Polishing

Whether you carry it to the mold or have it under your workstation, our Diamond Polishing Kit has all the products you need, right at your fingertips! Not only a convenient time saver, but a money saver as well!

Includes:• Diamond Compound• Felt Bobs• Felt Stick Sets• Poli-Felts• Wood Stick Sets• Lube Thinner

• Hard End Brushes• Soft End Brushes• Hard Cup Brushes• Soft Cup Brushes• Hard Wheel Brushes• Soft Wheel Brushes

Aluminum Polishing KitThe Go-To-Kit for Aluminum PolishingNeed to polish aluminum? This kit contains our best abrasives for getting the job done. Use the Moldmaker Plus and Ultra-soft stones for removing tooling marks. Champagne and 3M Wetordry paper for fine finishing. Also contains selection of GMX mounted points for aluminum deburring applications. If you need to diamond polish aluminum, try our Diamond Polishing Kit (# 216-0001).

Includes:• GMX Mounted Points• Ceramic stones• Moldmaker Plus All Grit Set• Ultrasoft All Grit Stone Set• Supreme Green Stoning Oil

• 3M™ Wetordry Polishing Paper• Norton Champagne A275 Paper• Ceramic stone Holder• LT Stone Holder• Screw-Lock Stone Holder

• EDM & Diemaker All Grit Stone Set• Moldmaker, RA, EDM & Ultra soft stones• Supreme Green Stoning Oil• End Brushes• Blue and Red Mounted Stones• Finishing Stone Holders• Carbide burs

• G-Flex and GMX Abrasives• Abrasive SiC Cut-Off Discs• Abrasive Belt Stick• Lapping Sticks• Felt Bobs, Sticks and Hand Buff• 3 grades of Diamond Compounds• Simichrome Polish

216-0001

405-0001

382-1000 (Kit Only)

NEW!

NEW!

382-1010 (Kit W/ Dremel #3000 Rotary Grinder)

382-1001 (Kit W/Marathon PH2X Micromotor Rotary 510-2946)

Includes:

$249.00

$199.00

$195.00 $275.00$395.00

An $80 Savings! (Versus buying items separately)




HEAVY DUTY FLEXIBLE SHAFTS1/4'' and 1/8'' tools

For When You Need POWER!

Nylon Tampico

Tampico/Nylon End Brushes, 1/4" Shank NEW!

NEW!

POLISHING SUPPLIES

Tampico for more aggressive polishing

Kimtech Paper

Nylon for finer polishing

High Temp Diamond Compound

Suhner MiniFixThe Suhner MiniFix is the most powerful flexible shaft system we offer. Made in Switzerland, these motors boast 2/3 HP and 500 Watts, giving the user consistent rotational speeds even when pressure is applied. The Suh-ner MiniFix is the ideal choice for heavy stock removal or heavy pressure polishing using brushes or felt bobs. For big jobs, try with our new Tampico and Nylon 1⁄4" shank brushes (on next page).

DUMORE Series 6 Low Speed Flexible Shaft Grinder

The Dumore Series 6 High torque flexible shaft system. Use with 1⁄8" or 1⁄4" mounted tools for heavy grinding, finishing, and high pol-ishing. The 1/4 HP motor can withstand heavy pressure, even at low speeds without slowing down. Suitable for fast polishing with our new 1⁄4" shank Tampico and Nylon brushes. 1/4 HP, 3 amp, 115V. Max 14,500rpm (no load), 12,000rpm (full load).

System Includes: Low speed motor, swivel base, 8' cord, flexible shaft assembly, handpiece with 1⁄8" and 1⁄4" collets, wrench, locking pin, flexible shaft lubricant.

MiniFix 25-R850-0120 // 11,000 – 25,000rpm

MiniFix 9-R850-0122 // 4,000 – 9,000rpm

Made in the USA

850-0225 // 14,500 Max RPM

FH 4 Handpiece (Included) 850-0124

NEW!

Foot Pedal850-0226

FH 4 Handpiece

FH 4 Handpiece

System Includes: Both MiniFix 25-R and 9-R sets come with: fully insulated motor, flexible shaft NA 4x1250mm, FH4 handpiece with 1⁄4" collet, metal carrying case, and set of mounted abrasives.

Collet Item# Price

1⁄41⁄ 8

3⁄ 32

850-0127 $41.25

850-0126 $41.25

850-0125 $41.25

$1,095.00

$1,465.00

$1,665.00

$350.00

$297.75


1/4'' and 1/8'' tools

For When You Need POWER!

Nylon Tampico

Tampico/Nylon End Brushes, 1/4" Shank NEW!

NEW!

POLISHING SUPPLIES

Tampico for more aggressive polishing

Kimtech Paper

Nylon for finer polishing

High Temp Diamond Compound

USED FOR cleaning the most extreme high polished surfaces. Can be used with diamond compound for the ultimate finishing touch. Engineered for excellent absorbency and low-lint wiping, these disposable wipes are solvent resistant and contain no binders or surfactants.

Features & BenefitsThe new "High Temp Diamond Compound" has been specifically formulated for polishing on hot surfaces. This compound holds a high vaporization point, so it can withstand the high temperatures of a hot mold surface up to 500⁰F. Save time—no need to wait for the mold to cool down! Polish your molds while still in the press!

Features & BenefitsHeavy duty 1⁄4" shank end brushes for high diamond polishing on larger jobs. 1" diameter helps the polishing get done faster. Brush length is trimmed to the perfect length of 3⁄4", eliminating the need for self trimming and providing excellent stability. Sold by each.

Item # Grit/Color Size Price

217-0404 #1 Ivory 10 Grams

217-0409 #3 Yellow 10 Grams

217-0414 #6 Orange 10 Grams

217-0419 #9 Green 10 Grams

217-0424 #20 Blue 10 Grams

217-0405 #1 Ivory 20 Grams

217-0410 #3 Yellow 20 Grams

217-0415 #6 Orange 20 Grams

217-0420 #9 Green 20 Grams

217-0425 #20 Blue 20 Grams

1 roll = 225 sheets. Each sheet measures 7" x 7"

NEW!

820-0515

114-5405 114-5400

Made in the USA

Made in the USA

Maximum Operating speed:10,000 RPM

$37.25

$42.25

$42.25

$43.75

$43.75

$65.00

$65.00

$75.00

$75.00

$75.00

$33.50

$15.58$16.50


AIR GRINDING

Straight Air Grinder

Angle Air Grinder

UHT Contra-Angle

UHT Straight

NSK Rotus

SUHNER Air Grinders

UHT USHIO Air Grinders

NEW!

CUTTING AND GRINDING

Features & Benefits- New cut style for machining stainless steel materials- Removes 35% more stock compared to conventional bur geometry- Specifically developed Inox cutting geometry-reducing heat buildup at the cutting edge and work-piece- High performance grinding- ensuring production savings and reduced downtime

Designed for Cutting Stainless Steel Alloys!

129-3010129-3000

NEW!

$19.50

$22.50

$12.50

$23.14

$23.50

Style SA-43 SA-51 SC-42 SC-51 SD-42 SD-51 SF-42 SF-51

Cutting Dia. (D1) 1⁄8" 1⁄4" 1⁄8" 1⁄4" 1⁄8" 1⁄4" 1⁄8" 1⁄4"

Length of Cut (L2) 9⁄16" 1⁄2" 9⁄16" 1⁄2" 1⁄8" 7⁄32" 1⁄2" 1⁄2"

Overall Length (L1) 11⁄2" 2" 11⁄2" 2" 11⁄2" 2" 11⁄2" 2"

Item # 129-3001 129-3002 129-3003 129-3004 129-3005 129-3006 129-3007 129-3008Each Price $12.75 $20.95 $12.75 $20.95 $12.75 $20.95 $12.75 $20.95

1⁄8

L1

L2

D1

Style SA-1 SC-1 SD-1 SF-1 SG-1

Cutting Dia. (D1) 1⁄4" 1⁄4" 1⁄8" 1⁄4" 1⁄4"

Length of Cut (L2) 5⁄ 8" 5⁄ 8" 7⁄32" 5⁄ 8" 5⁄ 8"

Overall Length (L1) 2" 2" 2" 2" 2"

Item # 129-3011 129-3012 129-3013 129-3014 129-3015Each Price $19.50 $22.50 $20.50 $23.50 $23.50

L1

L2

D1

1⁄4

Inox Carbide Burs

1⁄8" Shank

1⁄4" Shank

1⁄8" Inox Carbide 10-piece SetContains 2 SC-42, 2 SF-42, and 1 of all other 1⁄ 8" shank burs above

1⁄4" Inox Carbide 5-piece SetContains 1 of each 1⁄4" shank bur above

INOX1/8" 100,000 60,000 - 80,000

1/4" 65,000 30,000 - 45,000

3/8" 55,000 19,000 - 30,000

1/2" 35,000 15,000 - 22,000

Maximum Operating Speed

Bur Head Ø

Wear Eye Protection!

Wear Hearing Protection!

Observe the recommendedrotational speed, especially whenusing burs with long shanks!

Wear Protective Gloves

Speed RangeA Shape C Shape

F Shape

D Shape

H Shape G Shape

Made in the USA

$99.95$154.95


AIR GRINDING

Straight Air Grinder

Angle Air Grinder

UHT Contra-Angle

UHT Straight

NSK Rotus

SUHNER Air Grinders

UHT USHIO Air Grinders

NEW!

CUTTING AND GRINDING

Features & Benefits- New cut style for machining stainless steel materials- Removes 35% more stock compared to conventional bur geometry- Specifically developed Inox cutting geometry-reducing heat buildup at the cutting edge and work-piece- High performance grinding- ensuring production savings and reduced downtime

Designed for Cutting Stainless Steel Alloys!

The ROTUS system is a hand-held grinder with an energy saving air motor and handpiece weighing only 8.74 oz. Since it is an air driven system, there is virtually no heat generated during operation resulting in stable rotation speed. Made in Japan.This handpiece produces 30,000rpm and uses minimal air consumption. The energy saving mechanism runs quietly with the included silencer making it possible to operate with a 1HP (0.75kw) air compressor, 55 PSI 1⁄ 8" collet included.

System includes:• Air Grinder Motor IM-301• Twist Free Hose K-206 • Silencer K-209• New ring type IR-310 attachment• 1⁄8" dia. Collet CHH-3.175

• Air Line Kit AL-H1207F• Foot Control AFC-45• Piping Hose K-175• Lubricating Oil K-211• 4 Assorted Wrenches

850-7250

850-7320

850-7300

850-0905

850-0900

Quiet running handpieces ideal for many applications, including precision grinding, finishing and polishing. Feature self-lubricating vanes for dependable performance. Unique 1⁄8" fixed collet design provides extra-long ball bearing life and reduces heat buildup. The Contra-Angle 120° model allows access to hard-to-reach, deep areas. Both styles offer rear speed control and rear exhaust. Supplied with 5' of 3⁄16" air hose, 1⁄8" NPT coupler, 13" exhaust hose, wrench and pin.Made in Japan.

65,000 Max RPM

53,000 Max RPM

Specially designed for mold, tool, and die makers, these grinders achieve maximum power with minimum air consumption. Rigid rotary-vane motors provide exceptional performance and speeds up to 80,000rpm. Excellent for carbide and CBN tools. Use for milling, grinding, engraving and polishing. Choose from slim right-angle or straight grinder with rear speed controls. Both supplied with 1⁄8" collet and wrench. Each requires 1⁄8" NPT coupler and 1⁄4" ID hose. Made in Switzerland.

Optional 3⁄ 32" collet for Straight Grinder (850-7325)Optional 3⁄ 32" collet for Right Angle Grinder (850-7331)

80,000 Max RPM

80,000 Max RPM

30,000 Max RPM

Slim and Lightweight Fixed 1⁄8" Collet

High RPM's 1⁄8" Collet (3⁄32" Optional)

1⁄4" Inox Carbide 5-piece Set

$1,090.00

$770.00

$335.00

$299.00

$795.00


Phon

e 88

8.54

7.85

55 |

Fax

888

.454

.437

7 w

ww.

gess

wein

.com

201 H

anco

ck A

ve.

Brid

gepo

rt, C

T 06

605

Overview

• 2 Days of intensive hands-on mold polishing

• Polish a rough EDM surface to a Mirror A-2 finish

• Use the latest tools and equipment

• Instructed by a Master Mold Polisher with 40 years experience

• Powerpoint presentation explaining the physics of polishing on the granular level

• Open forum to ask questions about specific problems

• Bring parts from your workplace for review!

Benefits

• Learn the standard methods of mold polishing along with new techniques

• Beneficial for beginner, intermediate and expert mold polishers

• Hands on training with the latest products and technology for mold polishing

• Improve polishing efficiency and quality of surface finish

• Develop a better understanding of polishing concepts and a pride for polishing molds

2017 Class Dates

March 13th-14th | 16th-17th July 10th-11th | 13th-14th

October 23rd-24th | 26th-27th

Learn how to polish like a pro with the latest techniques and equipment.

Reserve your spot now: 888.337.5413

Classes are held in Bridgeport, CT

891-

3805

PRECISION FINISHING SUPPLIES

2017 BROCHUREPRECISION FINISHING SUPPLIES

2017 BROCHURE

New Products!Contents

2. Micro Tig Welding 3. PUK Welding Wire 4. Turbo Air Lappers 5. Ultrasonic Polishing 6. Finishing Stones 7. Polishing Kits 8. Heavy-Duty Flexible Shafts 9. Nylon / Tampico Brushes 10. Inox Carbide Burs 11. Air Grinders 12. Mold Polishing Classes

Prsr

t S

td M

ail

U.S

. Po

stag

ePA

IDPe

rmit

215

Mai

led

from

018

89

888.547.8555 | www.gesswein.com | 2017 Brochure

2017 brochure - privarsa2017 brochure micro tig welding page 2 ultrasonic polishing page 5 new...

Documents