raptor · 2018-08-17 · 2 3 270° straw blowing 270° 15 m 18 m 13 m 270° swivelling chute straw...
TRANSCRIPT
![Page 1: RAPTOR · 2018-08-17 · 2 3 270° STRAW BLOWING 270° 15 m 18 m 13 m 270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side Mounted, Trailed or Telehandler](https://reader033.vdocuments.net/reader033/viewer/2022050609/5fb05101b82af616b2160123/html5/thumbnails/1.jpg)
focus on performancewww.lucasg.com
RAPTOR MOUNTED STRAW BLOWER
TRAILED STRAW BLOWER STRAW BLOWER FOR TELEHANDLER
![Page 2: RAPTOR · 2018-08-17 · 2 3 270° STRAW BLOWING 270° 15 m 18 m 13 m 270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side Mounted, Trailed or Telehandler](https://reader033.vdocuments.net/reader033/viewer/2022050609/5fb05101b82af616b2160123/html5/thumbnails/2.jpg)
RAPTOR
11
FIXED BOLTED COMB
• Combination of 3 small and 2 long teeth
• Makes a mechanical pressure on the bale
• Improves the abrasiveness of the shredder and regulates the flow of materials.
PATENT MADE INLUCAS
1 Shredder: designed to process straw it is fitted with 5 serrated discs which guarantee a clean cut of the bale. The 18 teeth located between the discs bring the cut material to the turbine.
2 Loading rear door: the rounded design enables self-loading and bale handling for round bales up to 2m diameter and square bales up to 1.20 x 1.20 x 2.50 m.
3 Single-speed welded turbine: this piece has been designed in a single block to keep a perfect stability of the machine. Equipped with 6 blowing paddles, the material is launched up to 15 m on the right side and 13 m to the left side.
4 Blowing conduits: its large width of 33 cm combined with the cut-off plate avoid jamming problems and gives outstanding work output.
5 Bolt-on bed chain: hydraulically driven, it has 9 moving speeds from 0 to 20 m/min. The speed is adjusted by the electrical control, the bed chain brings the material to the shredder. It can be moved forward or backward.
6 Hydraulic drive: the shredder is hydraulically driven to enables low power tractor from 50 HP to achieve straw blowing application. The cinematic is put in security through a hydraulic pressure valve.
The RAPTOR bloc, easy straw blowingFor over 40 years, the different components of the Raptor bloc guarantee steady straw blowing and a high working output with round and square bales.
1
5
4
3
6
2
3
CUT-OFF PLATE
• Bevel edge plate located at the exit of the turbine, this piece ensure an exit of the material without jamming.
• Guarantee a steady and homogeneous straw blowing
![Page 3: RAPTOR · 2018-08-17 · 2 3 270° STRAW BLOWING 270° 15 m 18 m 13 m 270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side Mounted, Trailed or Telehandler](https://reader033.vdocuments.net/reader033/viewer/2022050609/5fb05101b82af616b2160123/html5/thumbnails/3.jpg)
32
270° STRAW BLOWING
270°
15 m
18 m
13 m
270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side
Mounted, Trailed or TelehandlerA RANGE OF POSSIBILITIES
The range of compact straw blower with loading rear door Raptor is composed of 3 models of 2 m³ capacity:
No matter if it is for round bales or square bales, the Raptor has been designed to do an efficient straw blowing regardless of the building’s configuration.
Control of rear collection door to save time when loading.
2ND CONTROL UNIT
SELF-LOADING OF ROUND OR SQUARE BALES
Models Mounted Trailed Telehandler
Capacity (m3) 2 2 2
Number of shredders 1
Round Bale Ø 1.60 m 1
Round Bale Ø 1.80 m 1
Round bale Ø 2m 1
Square Bale 1.20 x 1.20 x 2.50 m 1
REGARDLESS THE CONFIGURATION
270° hydraulic swivelling chute located as an extension of the turbine and the straw of flow to guarantee a bedding distance of 15 m on the right side and 13 m on the left side. The chute deflector adjusts the straw blowing distance, it is controlled from the tractor cab. This system makes possible the complete straw blowing of a barn in a single pass.Raptor telehandler:
hitch on telehandler’s boom head
Loading round bale
Loading square bale
Raptor trailed:draw bar with axle
Raptor mounted:3 points hitch
RAPTOR
![Page 4: RAPTOR · 2018-08-17 · 2 3 270° STRAW BLOWING 270° 15 m 18 m 13 m 270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side Mounted, Trailed or Telehandler](https://reader033.vdocuments.net/reader033/viewer/2022050609/5fb05101b82af616b2160123/html5/thumbnails/4.jpg)
RAPTOR
54
Oil-change of the single-speed or two-speed box to keep a high working output.
Hydraulic filter to keep high efficiency of the machine.
Totally bolt-on bed chain for an easy maintenance.
EASY TO MAINTAINTo ensure an optimal performance of the machine and keep maximum efficiency as in the first days, it is necessary to ensure a small amount of maintenance to the straw-bedder. A yearly maintenance will enable your machine to increase significantly its lifetime while keeping high working output.
ADAPTED HITCH TO EVERY NEED
EASY AND SIMPLE CONTROLS
HITCH FOR RAPTOR MOUNTED
3 POINTS HITCH:
Can be adapted to all kind of tractors.
WIDE CHOICE OF HITCH WHICH CAN BE FIT TO ALL TELEHANDLER MANUFACTURER.
Lucas G advices a minimum lifting capacity of 2.8 T and a hydraulic flow at boom’s head of at least 90 L / min.
ARTICULATED COUPLING
The machine perfectly follows the tractor wheels, improved manoeuvrability and driving comfort.
Manual control
Standard control solution for Raptor Mounted
Electric control Comfort
Easy control each button has its own function
Cabled control
Standard control solution for Raptor Trailed
HITCH FOR RAPTOR TRAILED STANDARD CONTROLS ELECTRIC CONTROLS OPTIONAL
HITCH FOR RAPTOR TELEHANDLER
Electric control Intuitive
Handy control from the tractor cab
FIXED COUPLING
Adjustable in 3 positions from 426 mm to 561 mm.
![Page 5: RAPTOR · 2018-08-17 · 2 3 270° STRAW BLOWING 270° 15 m 18 m 13 m 270° swivelling chute Straw blowing 15 m right side, Straw blowing 13 m left side Mounted, Trailed or Telehandler](https://reader033.vdocuments.net/reader033/viewer/2022050609/5fb05101b82af616b2160123/html5/thumbnails/5.jpg)
Raptor_EN_A_0718
Models Mounted Trailed Telehandler
Capacity (m3) 2
Number of shredders 1
Straw-bedding height with Swivelling chute (mm) 2500
Straw-bedding distance with Swivelling chute (m) 15 m right side – 13 m left side
Overall height (mm) 2380 2700 2380
Overall width (mm) 1800 2000 1800
Effective length (bucket filling) (mm) 1080
Overall width at wheels (mm) - 1950 -
Overall length of door Open/Closed (mm) 4130 / 2650 5200 / 3250 4130 / 2650
Tractor power (HP) 50 -
Oil flow min/max (L/min) 30 / 70 -
Oil flow at boom head (L/min) - - 90 / 100
Telehandler lifting capacity (kg) - - 2800
Pressure (bars) 160 / 200 -
Unladen weight (kg) 1210 1450 1210
Tyres - 7.50 x 16 12 PR – Ø 770 mm -
STANDARD EQUIPMENT AND OPTIONS
Manual Control
Cabled Control
Electric control Intuitive
Electric control Comfort
Two-speed gear box
2nd control unit for self-loading rear door
Legends : Standard Equipment : Option : Not available
RAPTORSTANDARD EQUIPMENT
• 270° Straw blowing chute
• Hydraulic shredder with cutting discs
• Fixed barrier
• Single-speed
• Hydraulic loading rear door
• 9 speeds bed-chain
focus on performance
focus on performance : Lucas G : LucasGFrance
Head Office22, Rue du Stade, 85130 La Verrie, France
T : +33 (0)2 51 65 41 36 // F : +33 (0)2 51 65 41 51 [email protected] // www.lucasg.com
Pict
ures
, wei
ghts
and
tech
nica
l spe
cifica
tions
are o
nly i
ndica
tive,
not
bin
ging
.