2019...pulse width modulation when enabled, pulse width modulation integrated circuitry flashes the...

P R O D U C TC A T A L O G

WWW.HIVIZLEDS.COM | (703)-662-3458

2019

HIVIZ LED LIGHTING2

TABLE OF CONTENTS

ABOUTThe TechWarranty

Vehicle Fit-Out

LED HEADLIGHTS4x6” Headlights

7” Headlights5.75” Headlights

THE GUARDIANGuardian

Guardian EliteGuardian Jr.

LED BROW LIGHTSStandard Brow Lights

Marker Brow LightsMini Brow Lights

Trunnion Brow LightsMounting Options

POLE MOUNTED SCENE LIGHTSPatriot Pole Mount

Guardian Pole Mount FT-SL-15 & 30

LIGHT TOWERSWillBurt Tower Lighting

CommandLight Tower Lighting

RECESSED SCENE LIGHTSSemi-Recessed

Under-AerialFully-Recessed

WORK LIGHTSWL-X Work Light Xtreme Series

FIRETECH GRILLE

COMPARTMENT & UNDERCARRIAGE LIGHTSStrip Lights

Undercarriage Lights

SPECIALTY LIGHTSCamera Lights

Monitors

RETROFIT LIGHTSPar 46 Upgrade

LIGHTING ACCESSORIESMounting Hardware

p.04-11

p.12-15

p.16-19

p.22-29

p.32-37

p.38-41

p.42-45

p.46-51

p.52-53

p.52-55

p.56-59

p.60-61

p.62-65

WWW.HIVIZLEDS.COM 3

HIVIZ LED LIGHTING4

HiViz LED Lighting is dedicated to developing the most innovative and highest quality LED lighting solutions on the market. Our products range from our flagship 72” low profile LED brow light to small utility lights, and everything in between. Unlike other manufactur-ers, our focus lies exclusively in forward-facing visible LED lighting products. This allows a specialist’s approach to designing the ultimate lighting solution.

We build products that put more light on your emergency scene than any other manu-facturer, specifically in the areas that you need it, all while streamlining the look of your apparatus and eliminating your lighting maintenance costs. We are so confident in our product offering that we couple it with the industry’s only limited lifetime guarantee.

“At HiViz LED Lighting, our development team works side by side with the men and women in the fire and emergency service industry; we’re firefighters ourselves. We understand what it takes to hop out of bed at 3AM for a structure fire in the middle of nowhere. We’ve been there on those tragic traffic accidents where the road gets shut-down for hours, usually just after the bars close at 2AM. Nothing makes a scene more difficult than inadequate lighting, that’s the reason our team is dedicated to supplying the best lighting available in our industry. Experience is the best teacher and it certainly helps us build better lights.”

ABOUT THE FIRETECH BRANDBY HIVIZ LED LIGHTING

WWW.HIVIZLEDS.COM 5

QUALITY AS A PRIORITY

All products are put on a digital power meter to test that it is consuming the correct amount of power, checking for any electrical faults.

CONSUMPTION & INPUT RANGE

Once products are assembled every product is run through a submersion (water dunk) test, then placed onto an aging rack and powered up for 30 minutes.

SUBMERSION & AGING

UNDERWATER

Products are placed in a -40°C chamber for 30 minutes, and then placed in a 80°C chamber for an additional 30 minutes. Products are then left on for 72 hours.

THERMAL IMPACT

Products are then switched on and off 20,000 times repeatedly to ensure that they remain func-tional after all testing.

LONG TERM DURABILITY

Products are sprayed from close distances with 80~100 BAR water pressure to verify the ingress protection rating, ensuring they are sealed prop-erly.

INGRESS PROTECTION

HIVIZ LED LIGHTING6

KNOW THE DIFFERENCE

THE HIVIZ DIFFERENCE

TECHNOLOGY LIGHTING EXPLAINED

INTENSITY

AMP DRAW

LUMENS PER WATT

LED Lighting is the most advanced technology on the market today, and offers maximum visibility and safety around your apparatus. LED Lights do not use a bulb, and without any moving or glass parts, are designed to operate maintenance free for the LIFE of your apparatus.

LED HID HALOGENHID lights require a bulb, starter and ballast to operate. They have a higher output per watt than Halogen bulbs, but take time to warm up and reach their full brightness. HID lights are also prone to excessive electrical noise, which can interfere with com-munication systems.

Tungsten-Halogen bulbs use an oversized globe and specially engineered filament to enhance light output. Halogen bulbs are by far the least efficient and often provide the least amount of light when compared to LED and HID options.

Top BinningNot all LEDs are created equal. Each run of any given model of LEDs by the man-ufacturer is binned to classify the quality within that batch. HiViz uses only top binned LEDs to ensure the highest quality.

High EfficacyHiViz products are engineered for the highest possible luminous efficacy - the ratio of lumens per watt. Our fixtures consume up to 2/3 less power than oth-ers in similar output ranges.

Pulse Width ModulationWhen enabled, Pulse Width Modulation integrated circuitry flashes the LED faster than the human eye can see for reduced heat, prolonged LED life and providing dimming capabilities.

Electronic Thermal ManagementThe most important factor in determining service life and performance of an LED fixture is the operating temperature of the circuit. Integrated Electronic Thermal Management automatically regulates heat levels by engaging ETM to prolong each LEDs lifespan to 50,000+ hours.

WWW.HIVIZLEDS.COM 7

LIGHT OUTPUT MEASURINGUSABLE LIGHT = LUX / F.C.

TOTAL LIGHT OUTPUT = LUMENS

Lumens is the measurement of light at the source. Lux (or Foot Candles) is the measurement of light on a spe-cific target. Analogous to fire fighting, Lumens is GPM/Flow, Lux is where the water droplets land. Changing from fog to straight stream does not effect the flow rate, it just effects where the water lands. Similarly, Lu-mens at the source does not tell you how much light is where you’re working, just how much light is produced. Temperature of circuit is analogous to Friction loss.

In general, adequate work lighting levels in the Fire/Rescue/EMS industry is defined as somewhere between 3 and 10 lux on target. At one lux, you generally have enough light to read a newspaper.

Lumens are a common standard for measuring light output at the source. It is important to know that

the LED Chip manufacturer rating is only for the light source in a perfect world, at a perfect temperature and

does not account for losses due to optical inefficiencies, electrical inefficiencies or heat.

The sum of the rated output of the LED chips is not enough to capture the whole story. When measuring effective output, the amount of light lost as heat, or in scattering through the optics, and to electricalInefficiency must also be accounted for. Effective Light Output is measured in a machine called aGoniophotometer, and allows comparisons between fixtures using reproducible scientific “IES” data. This is the ONLY fair way to compare lights from onemanufacturer to another. HiViz LED Lighting is happy to provide Photometric Isolux reports on any product upon request.

RAW LUMENS | VS | EFFECTIVE LUMENS

10% Optical Loss

10% Electrical Loss

10% Heat Loss

HIVIZ LED LIGHTING8

REALISTIC & ACCURATE FIT OUTSSpec’ing a new rig and don’t know where to begin? Send us your drawing to have our team recommend a layout! This service does not cost anything, and is a great way for you to ensure efficient and thoughtful placement of scene lights around your rig!

Our team can typically produce a detailed rendering within five to ten business days if provided proper vehicle specifications.

VEHICLE

2D BLUEPRINT

HiViz Lighting begins each project with a customer provided drawing of the rig to be outfitted, then

gathers the technical information for that

specific unit.

3D MODEL

A 3D model is built using the customer’s specifications, then carried over into the

rendering engine.

SIMULATION RENDERA simulation rendering

ensures the final product will meet the customer’s lighting requirements, as well as any

applicable standards.

SOLUTIONHiViz Lighting creates a complete breakdown of the customer’s specific

needs to meet their safety requirements.

FIT OUT GUIDE

LIGHTING SOLUTION PROCESS:

WWW.HIVIZLEDS.COM 9

EXAMPLE: FIRE TRUCK FIT OUT GUIDE

HIVIZ LED LIGHTING10

BROW LIGHTSBROW / VISOR LIGHTINGThe FireTech Brow Light is the keystone in our product range. As the first fixture designed specifically for the leading edge of an apparatus cab, this scene light streamlines the look of the face of your apparatus, and combines up to 7 traditional fixtures in to one.

1

1

22

6

3

LED HEADLIGHTSDOT COMPLIANT LED HEADLIGHTSThe FireTech 4X6 headlight is the only headlight SPECIFICALLY designed for use in emergency vehicles, and is guarantied for the life of the apparatus. Better foreground illumination is key, and the Halo / Park lamp helps to give a modern look and feel to a traditionally less exciting part of the truck.

2

GUARDIANBODY SIDE SCENE LIGHTINGAvailable in 10,000 and 20,000 equivalent lumen outputs, this fixture is a powerhouse for the side of your rig. The Guardian LED scene light uses a mounting hole layout which matches the most common 7x9 “900 series” fixtures in the industry, which makes it great for retrofits!

3

WWW.HIVIZLEDS.COM 11

6

6

3 3 5

4

POLE MOUNTEDLIGHT TOWER / POLE MOUNTED LIGHTINGElevation is key to reducing glare on a fire scene. Whether you’re mounting to a pole, a tripod, or a light tower, HiViz LED Lighting has you covered. Take a look at Page 30 & 31 to see some of our pole mounted scene lights. For light tower applications, reach out to your manufacturer of choice for more information!

4

WLX SERIESREAR WORK AREANFPA 1901 is very specific about measured light requirements in areas near the Fire Apparatus. The FireTech Work Lights are great choices for Rear Work Area, Hose bed, and Aerial Tip applications where NFPA Compliance is a must. Our photometric data is always available upon request.

5

FT-CU-AQXCOMPARTMENT / UNDERCARRIAGE LIGHTINGThe FT-CU-AQX and our HD Strip compartment lights were designed for 25 years of operation in whatever environment you throw them in. Under a truck, in a compartment, or up the aerial, these things are built to last. Stop spec’ing disposable fixtures and trust your fleet to the best: FireTech!

6

THE DIRTY DOZENHiViz LED Lighting and its partner companies manufacture close to 600 unique lighting fixtures. For the New-Build Fire Apparatus market, we work with our OEM Partners to focus on 12 parts specifically. Our goal is for our partners to have these pre-engineered and available as drop-downs in their preferred Quote Writing tool. By selecting a part from the “Dirty Dozen” on your new apparatus, you can help keep engineering time to a minimum and production schedules on time!


LED HEADLIGHTSThe FireTech 4X6 headlight is the only headlight SPECIFICALLY designed for use in emergency vehicles, and is guarantied for the life of the apparatus. Better foreground illumination is key, and the Halo / Park lamp helps to give a modern look and feel to a traditionally less exciting part of the truck.


DESIGNED FOR EMERGENCY SERVICESFireTech LED Headlights are a simple way to dramatically boost the total light output of your emergency vehicle. Utilizing long range IRIS Reflector technology, The FireTech LED headlight is able to push the light from the high beam LEDs to surprising distances, whereas the reflector for the low beam LED was engineered to produce a wide beam pattern to cover the entire roadway. Each beam is precisely positioned to keep light out of the eyes of traffic, ensuring they are unimpaired from the light. Two elliptical beam LEDs in each headlight are aimed to fill in the roadway right in front and to the sides of the vehicle, increasing safety while driving and on scene.

LED HEADLIGHT FEATURES

PARK (HALO) LOW BEAM HIGH BEAM HIGH ONLY

FIRETECH STOCK

DIRECT REPLACEMENT

LIFETIME WARRANTY

FMVSS 108 / DOT COMPLIANT

INTEGRATED PARK LAMP HALO

LED HEADLIGHTSDIRECT REPLACEMENT HEADLIGHTS


RAW LUMENSUSABLE LIGHT REFLECTOR COLORSBEAM MODESDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGEOPERATING RANGEEMC APPROVALVIBRATION RATING

4,210/EA1,000 FEET

CHROME, BLACK CHROMEHIGH/LOW, PARK LAMP, HIGH ONLY

6.57” X 3.94” X 3.29”25W

2.08A9-32V DC

-40F TO + 176FCISPR25 CLASS 1

15.6 Grms

4” X 6” LED HEADLIGHT6.57”

3.94”

3.29”

RAW LUMENSBEAM MODESWATTAGEAMP DRAW (@12V)INPUT VOLTAGE

RAW LUMENSBEAM MODESWATTAGEAMP DRAW (@12V)INPUT VOLTAGE

4,210/EAHIGH/LOW, PARK LAMP

43W3.58A

9-32V DC

4,210/EAHALO, LOW, HIGH

43W3.58A

9-32V DC

7” & 5.75” ROUND LED HEADLIGHT6.96”

6.96”

5.65”

5.65”

3.86”

2.88”

7” ROUND LED HEADLIGHT

5.75” ROUND LED HEADLIGHT

ITEM # DESCRIPTIONFT-4X6-HL 4X6 Headlight DOT High / Low (For Low Beam Use)FT-4x6-H 4X6 Headlight DOT High Beam OnlyFT-4X6-4KIT 4X6 Kit Containing 4 Headlights; 2 High/Low & 2 High OnlyFT-4X6-HL-KIT 4X6 Kit Containing 2 High / Low Headlights

FT-575RD-HFT-575RD-HL

5.75” Headlight DOT High Only 5.75” Headlight DOT High / Low (For Low Beam Use)

FT-575RD-HL-KIT 5.75” Kit Containing 2 High / Low Headlights

FT-7RD-HL 7” Headlight DOT High / Low (For Low Beam Use)FT-7RD-HL-KIT 7” Headlight DOT High / Low (For Low Beam Use)

MODELS


THE GUARDIANEver since our entry into the Fire market in 2011, our customers have been asking for a non-recessed Surface Mounted LED Scene light and we answered; in a big and bright way.


MORE LIGHT, LESS POWERThe Guardian Elite produces as much measurable light as fixtures advertised at 20,000 lumens in the fire industry. However, the Guardian Elite produces that light using close to 90 watts (7.5A) LESS power per fixture, at 12v DC. What does this mean for you? In the world of modern electronics, the capacity of the 12v chassis electrical system is often quickly consumed. When building a truck with lots of DC loads, you will be less likely to run into amperage load chart or electrical system limitations due to the Scene Lighting package using an ultra-efficient fixture like the FireTech Guardian!

Less Power = Less Heat. By keeping the circuit temperature low, the FireTech Guardian LED Surface Mounted Scene can offer sustained light output regardless of runtime on your incident.

“THE PERFECT SOLUTION FOR THE SIDES AND BACK OF YOUR APPARATUS”

INDUSTRY STANDARD SIZES

MULTIPLE OUTPUT OPTIONS

WIDE SPREAD PRECISION OPTICS

POLE MOUNTING OPTIONS (PG.26)

GUARDIAN FEATURES

NEW PRODUCTGUARDIAN JR.

THE GUARDIAN SCENE LIGHTSURFACE MOUNT SCENE LIGHT


EQUIVALENT LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSWATTAGEAMPERAGEINPUT VOLTAGE

EQUIVALENT LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSWATTAGEAMPERAGEINPUT VOLTAGE

20,50012,290BLACK125W

10.41A9-32V DC

GUARDIAN

GUARDIAN JR.

GUARDIAN ELITE - HIGH OUTPUT

10.63”

9.96”

7.40”

5.04”

2.80”

1.54”

10,0006,500

BLACK, CHROME70W

5.83A9-32V DC

GUARDIAN - STANDARD OUTPUT

ITEM # DESCRIPTION

FT-GSM Guardian LED Surface Mount; 10K lm DC PowerFT-GESM Guardian Elite LED Surface Mount; 20.5K lm DC Power

ITEM # DESCRIPTION

FT-GSMJR Guardian Jr. LED Surface Mount; 5K lm DC Power

MODELS

RETROFIT GASKET P/N: P-GSM-RGKITFor replacing older style fixture or halogen side scene light. Covers old or oversized holes in the body.

GUARDIAN OPTIONAL ACCESSORIES

BEZEL DELETE GASKET P/N: P-GSM-BDKITAllows installation of Guardian / Guardian Elite Scene Light without chrome bezel for a reduced mounting profile.

* Add “-B” to Guardian / Guardian Elite part number for a “blackout” model (black bezel and optic holders). 8-10 week lead time required for all “-B” orders.

* Add “-B” to Guardian Jr. part number for a “blackout” model (black bezel and optic holders). 8-10 week lead time required for all “-B” orders.

NEW PRODUCT LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGE

10 CREE XPG-35,0003,125

BLACK, CHROME7.40” X 5.04” X 1.54”

40W3.33A

9-32V DC


COMING2020

Scene lighting is about to get a massive upgrade. The new 2nd generation FireTech Brow Light will give you more control over your lighting than you ever thought possible. With custom written software on board and 10 years of applications research, this fixture takes the guess work out of smart, effective scene lighting.

[PATENT PENDING]

MODULAR | MULTI-ZONE | SMARTER

INTEGRATED

LIGHT ONLY WHERE YOU NEED IT; 3 ALL-NEW ZONES

LOGIC-BASED CONTROL FULLY INTEGRATED WITH APPARATUS ELECTRICAL SYSTEM

OPTIONAL INTEGRATED MARKER, TRAFFIC DIRECTOR OR WARNING LIGHTS

EXTRUDED MOUNTING RAIL INTEGRATES SEAMLESSLY TO APPARATUS CAB


SCENE LIGHTING IS ABOUT TO GET A

WHOLE LOT SMARTER


LED BROW LIGHTSThe FireTech Brow Light is the ultimate lighting solution for the front of your fire apparatus. Featuring Spot, Flood, and Scene lights, it has the power to illuminate anything in the path of the apparatus.


DOMINATE THE SCENE WITH 5 LIGHTS IN ONEThe FireTech Brow Lights give you the right type of lighting for the leading edge of your apparatus cab. By combining a long distance spot beam with multiple flood beams, your apparatus will have both range and coverage.

5 brow lights in one low profille housing

Wide Flood(Circuit 1)

NarrowFlood(Circuit 2)

Spot Beam(Circuit 3)

ALL ALUMINUM CONSTRUCTIONFireTech Brow Lights are manufactured from a solid billet of aluminum which offers superior structural rigidity and thermal dissipation.

ADJUSTABLE MOUNTS ALONG BODYUsing our patented rail mounting foot, the FireTech Brow Light can be securely attached to the cab every 12 inches, preventing the housing from flexing which would cause moisture intrusion.

OPTIONAL MARKER LIGHTS (DOT COMPLIANT)Each FireTech Brow Light has the added option of integrated DOT Approved marker lights to help increase safety and awareness.

BROW LIGHT FEATURES

BROW LIGHTS4”-75” LOW PROFILE SCENE LIGHT BARS


46”

54”

65”

73”

45”

50”

75”

79”

79”

FT-B-46-W | 36 LEDS | 19,008 RAW LM

FT-B-54-2PKIT-W | 42 LEDS | 22,176 RAW LM

FT-B-65-W | 51 LEDS | 26,928 RAW LM

FT-B-72-W | 57 LEDS | 30,096 RAW LM

FT-B-46-ML-W | 35 LEDS | 15,840 RAW LM

FT-B-46-ML3-W | 39 LEDS | 19,008 RAW LM

FT-B-72-ML-W | 59 LEDS | 28,512 RAW LM

FT-B-72-ML-3PKIT-W | 59 LEDS | 28,512 RAW LM

FT-B-72-3PKIT-W | 59 LEDS | 28,512 RAW LM

ITEM # DESCRIPTION ACTUAL LENGTHFT-B-46-W 46” Brow Light, 3 circuits 46.22”/1,174.05mmFT-B-46-ML-W 46” Brow Light, 5 integrated marker lights, 4 circuits 44.96”/1,142.40mmFT-B-46-ML3-W 46” Brow Light, 3 integrated marker lights, 4 circuits 50.01”/1,270.25mm

FT-B-54-2PKIT-W 2 Piece 54” Brow Light, single circuit for aerials 2X 27.33”

FT-B-65-W 65” Brow Light, 3 circuits 65.23”/1,656.80mm

FT-B-72-W 72” Brow Light, 3 circuits 72.69”/1,846.33mmFT-B-72-ML-W 72” Brow Light, 5 integrated marker lights, 4 circuits 75.12”/1,908.05mmFT-B-72-ML-3PKIT-W 3 Piece 72” Brow Light with marker lights for radiused cabs 2X 27.33” 1x 24.74”FT-B-72-3PKIT-W 3 Piece 72” Brow Light for radiused cabs 2X 27.33” 1x 24.74”

CHANGE “-W” TO “-B” ON ANY FIRETECH BROW LIGHT PART NUMBER FOR BLACK HOUSING

MODELSROOF MOUNTING KIT AVAIL.

SEE PG.50

STANDARD BROW LIGHTS

MARKER BROW LIGHTS

SIMULATES LOCATION OF AMBER MARKER LEDS

~

44.96”- 75.12”

2.06”

2.45”

DIMENSIONS

68”

FT-B-2.72-W | 114 LEDS | 60,192 RAW LM


5”

FT-MB-3-*-B | 3 LEDS | 1,584 RAW LM

8”


12”


27”FT-MB-21-*-B | 21 LEDS | 11,088 RAW LM

20”FT-MB-15-*-B | 15 LEDS | 7,920 RAW LM

31”FT-MB-24-*-B | 24 LEDS | 12,672 RAW LM

35”FT-MB-27-*-B | 27 LEDS | 14,256 RAW LM

42”

FT-MB-33-*-B | 33 LEDS | 17,424 RAW LM

CONFIGURE PART #

FT-MB-_____-_____-_____FT-MB-33-S-W3*

6*9152124*273339*

LEDS | BEAM | HOUSINGEXAMPLE CONFIGURATION

MINI BROW - 33 LED - SPOT - WHITE

SF

FT

BW

* Designates Special Order only. Lead time of 12 Weeks.

~

4.65”- 50.00”

2.06”

2.45”

DIMENSIONS

MINI BROW LIGHTS

S=SPOTLONG DISTANCE

FT=FIRETECH OPTICSBEST OF BOTH

W=WHITE B=BLACK

F=FLOODAMPLE COVERAGE

AVAILABLE BEAM PATTERNS

HOUSING COLOR OPTIONS

MINI BROW LIGHTS4”-42” LOW PROFILE SCENE LIGHT BARS

BROW & MINI BROW MOUNTINGMOUNTING OPTIONS FOR BROW AND MINI BROW LIGHT BARS

ITEM # ACTUAL LENGTH WATTS AMP DRAWFT-MB-3-*-* 4.65” 15 1.25FT-MB-6-*-* 8.43” 30 2.5FT-MB-9-*-* 12.21” 45 3.75FT-MB-15-*-* 19.77” 75 6.25FT-MB-21-*-* 27.33” 105 8.75FT-MB-24-*-* 31.11” 120 10FT-MB-27-*-* 34.89” 135 11.25FT-MB-33-*-* 42.44” 165 13.75FT-MB-39-*-* 50.00” 195 16.25


MINI BROW LIGHTS4”-42” LOW PROFILE SCENE LIGHT BARS

BROW & MINI BROW MOUNTINGMOUNTING OPTIONS FOR BROW AND MINI BROW LIGHT BARS

INCLUDED MOUNTING ACCESSORY

OPTIONAL MOUNTING ACCESSORIES

PEDESTAL MOUNTING FEET | FLAT SURFACE

CAB MOUNTING BRACKET | RADIUS SURFACEFOR USE WITH ANY BROW LIGHT WHITE: P-MB-R3FOOT-WBLACK: P-MB-R3FOOT-B

L-FOOT BRACKET | VERTICAL SURFACEFOR USE WITH ANY BROW LIGHT

WHITE: P-MB-LFOOT-WBLACK: P-MB-LFOOT-B

END CAP BRACKET | FLAT SURFACEFOR USE WITH BROW LIGHTS 36” OR LESS ONLY

MINI BROW WHITE: FT-MBKIT-LPX-WMINI BROW BLACK: FT-MBKIT-LPX-BDOUBLE MINI BROW WHITE: FT-MBKIT-PX-WDOUBLE MINI BROW BLACK: FT-MBKIT-PX-B


~

12.21”- 23.55”

2.06”

2.45”

CONFIGURE PART #

DIMENSIONS

MINI BROW TRUNNION LIGHTS

24”

FT-MB-18-TR-*-W | 18 LEDS | 9,504 RAW LM

31”

FT-MB-24-TRGWA-*-W | 24 LEDS | 12,672 RAW LM

17”


14”


FT-MB-_____-TR-_____-_____9

1218

LEDS BEAM HOUSING

SF

FT

BW

FT-MB-12-TR-S-WMINI BROW - 12 LED - TRUNNION

SPOT - WHITE

EXAMPLE CONFIGURATION

60 POINT LOCKING AIMING SYSTEMThe sturdy Trunnion bracket allows the Mini Brow Light to be precisely aimed regardless of mounting location. Enjoy full rotation flexibility from an ultra

low profile housing.

S=SPOTLONG DISTANCE


W=WHITE B=BLACK




ITEM # LENGTH WATTS AMP DRAWFT-MB-9-TR-*-* 13.87” 45 3.75FT-MB-12-TR-*-* 17.65” 60 5.0FT-MB-18-TR-*-* 25.20” 90 7.5FT-MB-24-TRGWA-*-* 31.11” 120 10.0

TRUNNION MINI BROW LIGHTS14”-31” LOW PROFILE SCENE LIGHT BARS

DOUBLE STACK MINI BROW LIGHTS4”-50” DOUBLE STACK SCENE LIGHT BARS

NOTE: The “TRGWA” style Trunnion is only Available on FT-MB-24 Model


TRUNNION MINI BROW LIGHTS14”-31” LOW PROFILE SCENE LIGHT BARS

5”

FT-MB-2.3-*-B | 6 LEDS | 3,168 RAW LM

8”

FT-MB-2.6-*-B | 12 LEDS | 6,336 RAW LM

11”

FT-MB-2.9-*-B | 18 LEDS | 9,504 RAW LM

21”FT-MB-2.18-*-B | 36 LEDS | 19,008 RAW LM

18”FT-MB-2.15-*-B | 30 LEDS | 15,840 RAW LM

30”FT-MB-2.27-*-B | 54 LEDS | 28,512 RAW LM

40”FT-MB-2.36-*-B | 72 LEDS | 38,016 RAW LM

50”

FT-MB-2.45-*-B | 90 LEDS | 47,520 RAW LM

~

4.70”- 49.37”

3.46”

3.31”

DIMENSIONS

CONFIGURE PART #

DOUBLE STACK MINI BROW LIGHTS

FT-MB-2._____-_____-_____369

1518273645

LEDS(X2 ROWS) BEAM HOUSING

SF

FT

BW FT-MB-2.6-S-W

DOUBLE STACK MINI BROW - 12 LED - SPOT - WHITE

EXAMPLE CONFIGURATIONS=SPOTLONG DISTANCE


W=WHITE B=BLACK




DOUBLE STACK MINI BROW LIGHTS4”-50” DOUBLE STACK SCENE LIGHT BARS

ITEM # ACTUAL LENGTH WATTS AMP DRAWFT-MB-2.3-*-* 4.70” 30 2.5FT-MB-2.6-*-* 7.90” 60 5FT-MB-2.9-*-* 11.10” 90 7.5FT-MB-2.15-*-* 17.50” 150 12.5FT-MB-2.18-*-* 20.60” 180 15FT-MB-2.27-*-* 30.20” 270 22.5FT-MB-2.36-*-* 39.80” 360 30FT-MB-2.45-*-* 49.37” 450 37.5

HIVIZ LED LIGHTING30 HIVIZ LED LIGHTING30

We’ve all seen the trend... murdered out fire apparatus are here to stay! The FireTech Brand has a large selection of blackout fixtures specifically designed for these applications!

BLACKOUT LED LIGHTS

WWW.HIVIZLEDS.COM 31WWW.HIVIZLEDS.COM 31

GUARDIAN SCENE LIGHT | PG.18 FIRETECH 4X6 HEADLIGHTS | PG.14

GUARDIAN JR SCENE LIGHT | PG.18 FIRETECH BROW LIGHTS | PG.24


POLE MOUNTED SCENE LIGHTSPole mounted Scene Lights are often the most utilized equipment on emergency scenes. Scene Lights from FireTech are well known for packing a big punch while covering a large area.


3/4” NPT POLE MOUNTAll FireTech brand LED Scene lights are designed to mount to the industry standard 3/4” NPT pole mount. Just unscrew your old fixture, inspect the wiring, and screw the new FireTech fixture in its place. It’s that easy.

CASTINGS POURED IN ROCHESTER, NY

HIGHEST LUMINOUS EFFICACY EVER

AC OR DC MODELS AVAILABLE

PATRIOT POLE-MOUNT FEATURES

NEW PRODUCT

PATRIOT POLE-MOUNTEDSCENE LIGHTING

HOUSING MACHINED IN AUBURN, WA


PATRIOT POLE-MOUNTEDSCENE LIGHTING

FT-PSL

NEW PRODUCT LEDSRAW LUMENS “DC | AC”EFFECTIVE LUMENS “DC | AC”OPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGE “DC | AC”AMP DRAW (@12V) “DC | AC”INPUT VOLTAGE

(30) CREE28,000 | 31,30015,305 | 18,800

STAINLESSCOMBO

13.85” X 7.10” X 4.17”185W | 140W

15A11-65V DC / 90-277V AC

ITEM # DESCRIPTIONFT-PSL Patriot Pole-Mount Scene Light 11-65V DC InputFT-PSL-110 Patriot Pole-Mount Scene Light 90-277 AC Input

MODELS

13.85”

7.10”

4.17”

SHOW SOME PRIDE!It doesn’t get much more patriotic than this;

machined from a solid slug of aluminum and shaped like ‘ole Glory, show your pride with

the FireTech Patriot Scene Light!

EXTREME LUMINOUS EFFICACYThe FT-PSL scene light uses the latest

and greatest LED Chip technology available to produce an earth shattering

31,300 raw lumens (18,800 effective). This fixture makes roughly 135 lumens per watt (measured) and has the ability

to put more light on target than any other fixture in its class.


POLE-MOUNTEDSCENE LIGHTING

FT-SL-GSM

CONFIGURE PART #

“SW” SWITCHOPTION

NO SWITCHOPTION

W=WHITE B=BLACK

SWITCH OR NO SWITCH BACKPLATE AVAILABLE OUTPUT AND POWER OPTIONS


EQUIVALENT LUMENSMEASURED LUMENSWATTAGEAMPERAGEINPUT VOLTAGE

EQUIVALENT LUMENSMEASURED LUMENSWATTAGEAMPERAGEINPUT VOLTAGE

20,50012,290

125W10.41A

9-32V DC

GUARDIAN ELITE - HIGH OUTPUT

10,0006,500

70W5.83A

12V DC

GUARDIAN - STANDARD OUTPUT

FT-SL-______- 110-SW-___

FT-SL-GESM-SW-B

FT-SL-GSM-SW-W FT-SL-GSM-W

GSMGESM

OUTPUT | INPUT | SWITCH | HOUSING


GUARDIAN ELITE SCENE LIGHT - BACK SWITCH 9-32V DC INPUT - BLACK HOUSING

BW

GSM= STANDARD GUARDIANGESM= GUARDIAN ELITE

“110” DESIGNATES

90-277V AC POWER(STANDARD IS 9-32VDC)

NEW PRODUCT

(OPT) (OPT)


POLE-MOUNTEDSCENE LIGHTING

17.48”

4.84”

3.31”

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGE

60 X 5W CREE31,68022,200

BLACK OR WHITESPOT, FLOOD, COMBO

17.5” X 7.05” X 3.30”300W

25A11-65V DC

FT-SL-30

CONFIGURE PART #

S=SPOTLONG DISTANCE


W=WHITE B=BLACK


AVAILABLE BEAM PATTERNS AVAILABLE OUTPUT AND POWER OPTIONS

HOUSING COLOR OPTIONS FT-SL-30-F-WEXAMPLE CONFIGURATION

SCENE LIGHT - FLOOD OPTICS - WHITE HOUSING

STANDARD11-65V DC INPUT

CONFIGURE PART #

S=SPOTLONG DISTANCE


W=WHITE B=BLACK


AVAILABLE BEAM PATTERNS AVAILABLE OUTPUT AND POWER OPTIONS

SWITCH OR NO SWITCH OPTION HOUSING COLOR OPTIONS

FT-SL-X-15-____-110-_____-_____

FT-SL-15-F-110-W-SW

(OPT. GEN) | BEAM | (OPT) | HOUSING | SWITCH


SCENE LIGHT - 30 LED - FLOOD BEAM AC POWER MODULE - WHITE HOUSING-SWITCH

SF

FT

BW

“X” DESIGNATES 7W LEDSHIGH OUTPUT

“110” DESIGNATES90-277V AC POWER

“SW” DESIGNATESSWITCH OPTION

LEDS | “X”RAW LUMENS | “X”EFFECTIVE LUMENS | “X”OPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGE | “X”AMP DRAW (@12V) | “X”INPUT VOLTAGE

30 X 5W CREE | 30 X 7W CREE20,000 | 28,000

11,888| 15,305BLACK OR WHITE

SPOT, FLOOD, COMBO11.75” X 7.54” X 4.94”

150W | 185W12.5A | 15.4

11-65V DC / 90-277V DC

FT-SL-15 | FT-SL-X-1512.40”

9.96”

12.40”

FOR UPGRADED OUTPUT SEE “X” SPECS BELOW

FT-SL-30-____-_____

BEAM | HOUSING

SF

FT

BW

(OPT)


LED LIGHT TOWERSHiViz LED Lighting is the specialty manufacturer behind many products available for light tower markets. We don’t make a payload elevator, just the fixtures. We specialize in putting light on target, while our partners at WillBurt and CommandLight specialize in payload elevation. Reach out to your preferred light tower supplier for more information.


LIGHT TOWER FIXTURESDESIGNED TO PUT MORE LUX ON TARGET

HIGHER LUMINOUS EFFICACY MEANS LESS ENERGY CONSUMED

SUPERIOR WARRANTY COVERS YOU FOR LIFE

SYMMETRICAL OPTICS PUT MORE LIGHT ON TARGET

AVAILABLE IN AC OR DC MODELS

WHY CHOOSE FIRETECH

SHAPE OF LIGHT MATTERSHiViz LED Lighting designs purpose-built fixtures for light tower applications. Traditional LED scene lights project light “down” and “out”, which works great when fix-mounted to the body of a truck. However, when traditional fixtures are tilted down (like on a light tower), the majority of light generated (lumens) ends up on the roof of the apparatus. If the fixtures are tilted backwards, the “down” angled optics ends up shining “up” and the beam ends up totally useless to the firefighter. Choosing FireTech Symmetrical Optics on light towers will ensure that every lumen created at the source is converted into useful lux on target.

OTHER MANUFACTURERS ASYMMETRIC OPTICS FIRETECH SYMMETRICAL OPTICS


LIGHT TOWER FIXTURESDESIGNED TO PUT MORE LUX ON TARGET

SL-X-15 FIXTURES FOR SHADOW, KNIGHT, AND CL

TOWERS AVAILABLE IN CUSTOM COLORS

“SLIM” OPTION FOR KNIGHT TOWERS. 13” WIDE

ALL ELECTRONIC AND MECHANICAL OPERATION

WILLBURT NIGHTSCAN TOWERS

SIRION FOR MAXIMUM LIGHT OUTPUT (NOW AVAILABLE IN PROFILER!!)

PURPOSE-BUILT FIXTURES EXCLUSIVELY DESIGNED FOR WILLBURT BRAND TOWERS

XL-200 FOR THE ULTIMATE RELIABILITY

ELECTRIC AND PNEUMATIC HYBRID FOR HIGHEST POSSIBLE ELEVATION

COMMANDLIGHT TOWERS

RETROFIT YOUR TOWER“Ask your light tower supplier about retrofitting your existing tower to the latest LED fixtures by HiViz LED Lighting! Virtually any tower can be updated; AC or DC, WillBurt or CommandLight!”

ITEM # DESCRIPTION (2) FT-MB-2.27-F-B 27 LEDs, 28,512 RAW Lumen Scene Light. FLOOD Optics (2) FT-MB-12-TR-S-B 12 LEDs, 6,336 RAW Lumen Scene Light. SPOT OpticsFT-SL-X-15-FT-B 30 LEDs, 28,000 RAW Lumen Scene LightLumenForm Retrofit Light Replacement fixture for legacy 500w Quartz halogen

ITEM # DESCRIPTIONXL-200 16 LEDs, 20,000 RAW Lumen Scene LightX200 20 LEDs, 20,000 RAW Lumen Scene LightSirion 80 LEDs, 220,000 RAW Lumen Scene Light

*

* These part #’s are sold together for the “Slim Knight Tower” lighting package


RECESSED SCENE LIGHTSSometimes space is limited! FireTech Recessed scene lights give you the ultimate flexibility when designing an apparatus.


LEDSRAW LUMENSEFFECTIVE LUMENS*OPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGEEMC APPROVALVIBRATION RATING

30 X 5W CREE15,84011,880

BLACK OR WHITESPOT, FLOOD, COMBO20.26” X 6.13” X 4”

150W12.5A

9-32V DCCISPR25 CLASS 1 / CE

21.2 Grms

FT-MB-2.15-*-*-CPREC

REQUIRES LESS THAN 2” MOUNTING DEPTH

7.50” 20.26”

6.13”

6.13”

3.05” .95”

45.0°

150 WATT SEMI-RECESSED SCENE LIGHTThe FireTech FT-MB-2.15-*-CPREC is a 150 Watt Semi-Recessed FireTech Double Stack mini-brow light. This fixture mounts easily to the side of your apparatus and maintains the fixture’s native adjust-ability. Once it’s installed, just aim the light where you need it and lock down the mounting feet. The FT-MB-2.15-CPREC is the perfect addition to the side of any apparatus, new or old.

FT-MB-2.15-*-*-CPREC-OPTICS (S, F, FT) -HOUSING COLOR (B, W)CONFIGURE PART #

RECESSED / SEMI-RECESSEDSCENE LIGHTING


RECESSED / SEMI-RECESSEDSCENE LIGHTING

LEDSRAW LUMENSEFFECTIVE LUMENS*OPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGECONNECTOREMC APPROVALVIBRATION RATING


36 X 5W CREE19,00813,305


24.53” X 7.28” X 4.72”180W

15A9-32V DC

DEUTSCH DT04-2PCISPR25 CLASS 1 / CE

21.2 Grms

9 X 7W CREE7,2005,734


7.74” X 7.73” X 3.22”63W

5.25A11-65V DC


21.2 Grms

24.53”

4.92

” 7.

28”

7.74”

7.73”

4.72”

3.22

FT-MB-2.18-*-*-REC

FULLY RECESSED; STICKS OUT LESS THAN 1/4”

FT-WL-X-9-*-*-CPREC-ADJ

FT-MB-2.18-*-*-REC-OPTICS (S, F, FT) -HOUSING COLOR (B, W)


9 X 7W CREE7,2005,734


7.74” X 7.73” X 3.22”63W

5.25A11-65V DC


21.2 Grms

7.74”

7.73”

3.22

FT-WL-X-9-*-*-CPREC-FIX

FT-WL-X-9-*-*-CPREC-FIX-OPTICS (S, F, FT) -HOUSING COLOR (B, W)

FT-WL-X-9-*-*-CPREC-ADJ-OPTICS (S, F, FT) -HOUSING COLOR (B, W)

CONFIGURE PART #

CONFIGURE PART #

CONFIGURE PART #

FIXED MOUNT

ADJUSTABLE MOUNT


NFPA 1901 is very specific about measured light requirements in areas near the Fire Apparatus. The FireTech Work Lights are great choices for Rear Work Area, Hose bed, and Aerial Tip applications where NFPA Compliance is a must. Our photometric data is always available upon request.

WORKLED LIGHTS



9 X 7W CREE7,2005,734


4.46” X 10.13” X 3.71”63W

5.26A9-32V DC


21.2 Grms

10.13”

4.45”

3.71”

FT-WL-X-9-*-*-SH

SWIVEL MOUNT

HANDLE MOUNT

THE ULTIMATE ADJUSTABLE WORK LIGHTCoupled to this innovative swivel/handle assembly, the WL-X-9 work light is one of the most versatile utility fixtures on the market. It far exceeds the NFPA 1901 Ch 13 requirements as a rear work light producing close to 5,700 measured lumens at the source. With the adjustable mount, you can point this fixture at whatever you are working on without having to unbolt the light or use any tools.

This fixture has an integrated switch in the back, so no need for sophisticated wiring on basic utility vehicles. It works great as an Aerial Tip light, as a rear hose bed or utility light, or as a scene light in virtually any area on your rig.

What really makes the WL-X-9 stand out from its siblings is that just a single fixture of this light is NFPA compliant at the tip of an aerial.

FIRETECH WL-X SERIESWORK LIGHT XTREME


FIRETECH WL-X SERIESWORK LIGHT XTREME



20 X 7W CREE16,00011,270


9.37” X 6.59” X 4.13”140W

11.66A9-32V DC


21.2 Grms

12 X 7W CREE9,6006,697


6.06” X 5.24” X 3.54”84W7.0A

9-32V DCDEUTSCH DT04-2P

CISPR25 CLASS 1 / CE 21.2 Grms

FT-WL-X-20-*-*

FT-WL-X-12-*-*


9 X 7W CREE7,2005,734


5.71” X 5.12” X 3.33”63W

5.26A9-32V DC


21.2 Grms

FT-WL-X-9-*-*


LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGECONNECTOREMC APPROVALVIBRATION RATING

4 X 3W CREE2,000

950BLACK OR WHITE

FLOOD3.54” X 3.54” X 2.32”

12W1.0A



FT-WL-X-4-*


5 X 7W CREE4,0003,305


3.94” X 4.57” X 2.95”35W2.9A



FT-WL-X-5-*-*



4 X 5W CREE2,1151,164

BLACK OR WHITESPOT,FLOOD,COMBO

3.93” X 4.25” X 2.57”20W

1.66A9-32V DC


21.2 Grms


7 X 5W CREE3,6962,587


4.71” X 3.97” X 3.14”35W2.9A



FT-WL-3500-*-*

FT-WL-2000-*-* AVAILABLE WITH COLORED LEDS!

AVAILABLE WITH COLORED LEDS!


FIRETECH GRILLEFORD SUPER DUTY GRILLE REPLACEMENT

FIRETECH FORD SUPER DUTY GRILLE REPLACEMENTPurpose built for the front of your Firetruck or Ambulance, the FireTech LED Grille kits are the perfect solution when looking for an upgrade to the factory headlights without altering the DOT compliance on the fixtures.

The FireTech LED Grilles are designed with (4) Federal Signal FireRay 7x4 warning lights and (4) Vision X / HiViz LEDs “FIRETECH” CG2 Off-road Light Cannons. Two cannons sport a single highly focused LED for long distance projection, while the other two multi-optic cannons project light in a wide spot beam to fill in the foreground. These fixtures are a bolt-on solution giving maximum visibility to the front of your fire or other emergency vehicle.

DURABLE LASER-CUT STAINLESS STEEL DESIGN

2 SINGLE-LED LONG DISTANCE LIGHT CANNONS 2 MULTI-LED WIDE SPOT LIGHT CANNONS

OEM LOCATION MOUNTING USES FACTORY-INSTALLED MOUNTS

4 FEDERAL SIGNAL “FIRERAY” WARNING LIGHTS

FIRETECH FORD SUPER DUTY GRILLE


FIRETECH GRILLEFORD SUPER DUTY GRILLE REPLACEMENT

FIRETECH FORD SUPER DUTY GRILLE REPLACEMENTS

ITEM # DESCRIPTION

FT-CG2GKIT-17FSD-FR7C-R-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, blue leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

FT-CG2GKIT-17FSD-FR7C-RW-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, red/white leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

FT-CG2GKIT-17FSD-FR7C-B-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, blue leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

FT-CG2GKIT-17FSD-FR7C-BW-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, blue/white leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

FT-CG2GKIT-17FSD-FR7C-A-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, amber leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

FT-CG2GKIT-17FSD-FR7C-AW-FR7MC 2017+ FORD SD CG2 Grille Kit, 4 6” light cannons, 4 Federal FireRay Warning Lights (clear lens, amber/white leds, with chrome bezel). Fits vehicles WITHOUT factory forward facing camera module.

STANDARD KITS

CONFIGURE PART #

1.) PICK YOUR MODEL 3.) PICK YOUR WARNING LIGHT BEZEL COLOR2.) PICK YOUR FEDERAL FIRERAY WARNING LIGHTS

FT-CG2GKIT-_______

PICK YOUR MODEL THEN USE THE CONFIGURATION SHEET TO PICK YOUR (4) WARNING LIGHTS & BEZEL COLOR

EACH LIGHT (1-4) IS CONFIGURABLE WITH:

MODEL

SCAN HERE TO DOWNLOAD FEDERAL FIRE WARNING LIGHT

CONFIGURATION SHEET OR VISIT WWW.HIVIZLEDS.COM

“11FSD” ‘11-16 FORD SUPER DUTY

“FR7MC” CHROME TRIM BEZEL

“FR7MB” BLACK TRIM BEZEL

“17FSD” ‘17+ FORD SUPER DUTY

“FR7-R” - RED LENS, RED LED“FR7-B” - BLUE LENS, BLUE LED“FR7-A” - AMBER LENS, AMBER “FR7-G” - GREEN LENS, GREEN LED “FR7C-R” - CLEAR LENS, RED LED“FR7C-B” - CLEAR LENS, BLUE LED“FR7C-A” - CLEAR LENS, AMBER LED “FR7C-W” - CLEAR LENS, WHITE LED “FR7C-RW” - CLEAR LENS, RED/WHITE SPLIT “FR7C-BW” - CLEAR LENS, BLUE/WHITE SPLIT “FR7C-AW” - CLEAR LENS, AMBER/WHITE SPLIT “FR7C-RB” - CLEAR LENS, RED/BLUE SPLIT “FR7C-RA” - CLEAR LENS, RED/AMBER SPLIT “FR7C-BA” - CLEAR LENS, BLUE/AMBER SPLIT “FR7LEDSCENE” - SCENE LIGHT, CLEAR LENS

42

31

17+ FORD SUPER DUTY 11-16’ FORD SUPER DUTY


With the FireTech Compartment & Undercarriage lights, you will never see sections unhooking from each other, or pieces of the light going out. Mount it inside or out, we’ll stand behind it forever.

COMPARTMENT & UNDERCARRIAGE

LED LIGHTS


7.5”

COMPARTMENT / UNDERCARRIAGE LIGHTINGDURABLE & COMPACT

7.5”

FT-CU-HD-7.5 | 9 LEDS | 71 EFFECTIVE LM

12”

FT-CU-HD-12 | 21 LEDS | 207 EFFECTIVE LM

24”


36”


48”


DIMENSIONS

COMPARTMENT STRIP LIGHTS


THE LAST UNDERCARRIAGE LIGHT YOU’LL EVER PURCHASEFT-CU-AQX

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSNUMBER OF LIGHTSWATTAGEAMP DRAW (@12V)INPUT VOLTAGECONNECTOREMC APPROVALVIBRATION RATING

6 X 3W CREE1,5001,050WHITE

180° ULTRA WIDE FLOOD1

22W1.833A



4.13”/105mm

4.13”/105mm

1.25”/32mm

SUBMERSIBLE UP TO 100’

-180° PURE FLOOD ILLUMINATION-SMD LEDS PROVIDE 140 LUMENS (EA)-1.76” DIAMETER- GREAT FOR SMALL COMPARTMENTS, DOME LIGHTS, OR ENGINE COMPARTMENTS

HD ALUMINUM COMPARTMENT LED LIGHT POD

*SOLD AS 1

FT-PDW-B

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. LIGHT COLORSBEAM PATTERNDIMENSIONSWATTAGEAMP DRAW (@12V)INPUT VOLTAGECONNECTORVIBRATION RATING

32 ULTRA WIDE SMD LEDS500456

BLACKWHITE, AMBER, R, G, B

ULTRA-WIDE FLOOD3.19” X 3.52” X 0.91”

6W0.5A


21.2 Grms

FT-CU-P500 USE ULTRA-WIDE SCATTERED LIGHT TO YOUR ADVANTAGE


Backup Cameras often get in the way of mounting scene lighting. HiViz LEDs manufactures a complete range of fixtures that help solve spacial problems on the back of your rigs!

CAMERA-INTEGRATED LED LIGHTS


CAMERA-INTEGRATED LIGHTINGSPECIFIC APPLICATION LIGHTING

WHATS INCLUDEDThe 7” Monitor ships with 2 mounting brackets, a sun shade, 4 video input harnesses, a master wiring harness, and a wireless remote controller. Attaching this monitor to any FireTech Camera-Integrated Scene light is a breeze.

4 CAMERA INPUTS, 1 VIDEO OUTPUT,1 AUDIO OUTPUT

AUTO SWITCHES TO BACK-UP, LEFT OR RIGHT SIDE CAMERA VIEWS

IMAGE ADJUSTABLE FOR HORIZONTAL, VERTICAL, MIRROR AND NORMAL VIEWING

WATERPROOF IP67

7” MULTI-FUNCTIONAL MONITOR

ITEM # DESCRIPTION

HV-QMA7003 7” Waterproof Camera Monitor with touch pad control

MODELS


CAMERA-INTEGRATED LIGHTINGSPECIFIC APPLICATION LIGHTING


6 X 5W CREE3,1682,217

BLACK OR WHITEFLOOD

4.72” X 5.50” X 4.88”30W2.6A



FULL-COLOR CAMERAGLARE SHIELD INCLUDEDEASY INSTALL WITH EXISTING DISPLAY7” STANDALONE DISPLAY OPTIONALPOWERFUL LEDS FOR NIGHT USE

FT-WL-3500-C-*4.72”/120mm

5.50”/140mm

4.88”/124mm

ITEM # DESCRIPTIONFT-WL-3500-C-F-B Forward Facing Camera, Normal ImageFT-WL-3500-C-F-W Forward Facing Camera, Normal ImageFT-WL-3500-RC-F-B Rear Facing Camera, Mirror ImageFT-WL-3500-RC-F-B Rear Facing Camera, Mirror Image

MODELS

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSDIMENSIONSINPUT VOLTAGECONNECTOR

18 X 5W LEDS - 6 X 3W LEDS9,504-19,008

6,652 - 13,305BLACK OR WHITE

SPOT, FLOOD, COMBO26.39 - 49.09

9-32V DC2X DEUTSCH DT04-2P

1X RCA, 1X 12V CANON

OPTIONAL FLASHING END-CAPS PACKAGED WITH 24 LED MINI BROWEASY INSTALL WITH EXISTING DISPLAY7” STANDALONE DISPLAY OPTIONALIDEAL BACK UP CAMERA

MINI BROW CAMERA LIGHT

CONFIGURE USING ANY 2 MINI-BROW

LIGHTS*SEE WEBSITE FOR CONFIGURATION TOOL

ITEM # DESCRIPTION LENGTHFT-MB-18-C-F-* 2x FT-MB-9-F-* + Camera Bridge 26.39” OverallFT-MB-24-C-F-* 2x FT-MB-12-F-* + Camera Bridge 33.95” OverallFT-MB-30-C-F-* 2x FT-MB-15-F-* + Camera Bridge 41.51” OverallFT-MB-36-C-F-* 2x FT-MB-18-F-* + Camera Bridge 49.09” Overall

MODELS


ITEM # DESCRIPTIONFT-P48-F 1x Flood FixtureFT-P48-S 1x Spot FixtureFT-P48-NFKIT 2x Flood, 1x Spot Fixture

MODELS

RETROFIT LIGHTINGRE-USE YOUR EXISTING HOUSING FOR A SIMPLIFIED INSTALLATION

FT-P48-NFKIT

DIRECT DROP-IN FOR ANY PAR 46 FIXTURE

SPOT OR FLOOD CONFIGURATION

REDUCED POWER CONSUMPTION

SOLID ALUMINUM HOUSING

PAR 46 DIRECT REPLACEMENT


RETROFIT LIGHTINGRE-USE YOUR EXISTING HOUSING FOR A SIMPLIFIED INSTALLATION

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSREPLACESWATTAGE

4 X 10W P7 LEDS3,6002,160

SILVERSPOT, FLOOD

ANY PAR46 FIXTURE40W

FT-P48

LEDSRAW LUMENSEFFECTIVE LUMENSOPT. HOUSING COLORSOPT. BEAM PATTERNSREPLACESWATTAGE

12 X 10W P7 LEDS10,800

6,480SILVER

SPOT, FLOODANY PAR46 FIXTURE

120W

FT-P48-NFKIT

FT-P48-NFKIT

THE PAR 46 UPGRADEThe Par 46 sealed beam fixture has been a staple in the fire service for years. If you have this type of light on your rigs and are looking for an economical way to upgrade, the FT-P48 is designed for you. Just pop the old lamp out, swap the new LED module in, connect the wires and you’re good to go! Up to 10 times the light output while only drawing 40w.

THE NIGHTFIGHTER PACKAGEMany fire apparatus were manufactured with a 12v 3x head “NightFighter” Halogen scene light. If you have this type of light on your rigs and are looking for an economical way to upgrade, the FT-P48-NFKIT has your name all over it. This kit includes 2 FLOOD and 1 SPOT replacement modules that can be installed in your bays in under 20 mins. Just pop the old lamps out, swap the new LED modules in, connect the wires and you’re good to go! Up to 10 times the light output while only drawing 120w.


‘9-16 SD A-PILLAR MOUNT

17+ SD A-PILLAR MOUNT

P-OEBRACKET-0916FSD-BP-OEBRACKET-0916FSD-WP-OEBRACKET-1718FSD-BP-OEBRACKET-1718FSD-WFT-B-50-W-0916FSDKITFT-B-50-B-0916FSDKITFT-B-46-ML3-W-0916FSDKITFT-B-46-ML3-B-0916FSDKITFT-B-50-W-1718FSDKITFT-B-50-B-1718FSDKITFT-B-46-ML3-W-1718FSDKITFT-B-46-ML3-B-1718FSDKIT

09-16 BRACKETS (BLACK)09-16 BRACKETS (WHITE)

17+ BRACKETS (BLACK)17+ BRACKETS (WHITE)

BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (WHITE) BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (BLACK)

BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (WHITE)BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (BLACK)

BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (WHITE) BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (BLACK)

BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (WHITE)BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (BLACK)

FORD SUPER DUTY A-PILLAR BROW LIGHT MOUNTING KITThe FireTech Brow light can easily be mounted to the leading edge of your 09-16 Ford SuperDuty F-250-550 cab. This bracket kit allows installation of an ultra-low-profile brow light in your station, with basic tools and a couple hours of time. This particular configuration mates seamlessly to the FT-B-46-ML3 (with center 3 ID lights) or the FT-B-50 (no marker lights).

The 2009-2016 Ford Super Duty A-Pillar Brow Light Mounting Brackets are made from high quality US made steel. The bracket kit installs in the door jam to allow protection from the elements and prevent water from leaking into your vehicle. Grip sert nuts are used to fasten into the body; some minor drilling is required, but allows a fast and simple installation that is super easy to service or remove later down the road.

MODELS

LIGHTING ACCESSORIESMOUNTING AND INSTALLATION

B46 MOUNT IN USE


LIGHTING ACCESSORIESMOUNTING AND INSTALLATION

FT-MBKIT-LPXFT-MBKIT-PXFT-MBECMFT-MB2ECM

FT-MB-LFOOT-WFT-MB-LFOOT-B

MINIBROW OR B46DOUBLE MINIBROWDOUBLE MINIBROWMINIBROW OR B46

WHITE FEETBLACK FEET

FT-WL-X-HANDLE FITS 9, 12, AND 20 LED WORK LIGHTSCOMES WITH HANDLE AND MOUNTING BOLTS

FT-LPBRKTMB9 (FT-MB-9 MINIBROW INCLUDED)FT-LPBRKT (BRACKET ONLY)EASILY MOUNT A FT-MB-9 (9 LED MINIBROW) TO THE LICENSE PLATE OF NEARLY ANY VEHICLE!

AVAILABLE IN SATIN BLACK OR GLOSS WHITE COLORS

FOR USE WITH LIGHT BARS 36” OR LESS ONLY

AVAILABLE IN SATIN BLACK OR GLOSS WHITE COLORSM10 X 1.5P 20MM THREAD - SOLD IN PAIRS

BROW LIGHT MOUNTING BOLTS

FT-WL-X HANDLE KITLICENSE PLATE MOUNT

MINIBROW LFOOT


Safer, Faster, Emergency and Rapid Response.

2019...pulse width modulation when enabled, pulse width modulation integrated circuitry flashes the...

Documents