Rig shown with some options

®VERSA-DRILLV-2095EXPLarge Diameter /Deep Hole Waterwell

Oil and Gas Exploration Rig

Leading the industrywith innovative,

state-of-the-art drilling rigs.

®

New Options:ReverseCirculationPackage

500 RPM &750 RPMTop Head WithWireline Package

BASE MACHINEMounting

Custom 2 man carrier with center man drive, 6x8(all wheel drive), CAT C-18 (630HP)

Power DistributionDrill/truck single-power source with exclusive Versa-Drillpower distribution gearbox/pump drive, providesdirect coupled thru-drive to power rig hydraulics andIngersoll-Rand screw air compressor

HydraulicsRotation is a closed loop circuit powered by a variabledisplacement piston pump

Feed, winch, auxiliary and set-up functions are poweredby 4 axial piston load sense pumps

105-gallon reservoir with 10 micron in-tank return filterand 10 micron pressure filters for closed-loop pumps

Air Compressors900 CFM/350 PSI self-contained moduleor1070 CFM/350 PSI self–contained moduleor1250 CFM/350 PSI self-contained module

All compressor modules are direct driven with drive shaft from powerdistribution box accompanied by hydraulic chassis clutch control(controlled at drill console)

Derrick12” x 28” tubular derrick construction48’ overall length

36’ head travel(No derrick crown load)

Feed System (patented)Direct coupled, cylinder drivenPullback 95,000 lbs.Pulldown 34,000 lbs.Travel Speed Up 0 to 180’/min.

Down 0 to 230’/min. back to top

Top Head RotationStandard high performance 3-speed/ torque planetary,spur gear top headHigh Torque 8,100 ft.-lb. @ 132 RPMMid Torque 6,200 ft.-lb. @ 173 RPMLow Torque 4,280 ft.-lb. @ 250 RPM

Main Winch & Jib Boom12,000 lb. (standard) hydraulic powered main winch,includes hydraulic jib boom with 180° radius swing and40” extension 18,000 lb. main winch (optional)Rope Capacity 220’ of 5/8” rotation resistant cableLift Capacity 12,000 lb. single line (bare drum),

18,000 lb. (optional)Speed 104’/min. (bare drum)

Control PanelElectro/hydraulic console control panel with functionallygrouped gauges and controls with twin fold-up aluminumplatforms (standard)

Leveling Jacks (8 point leveling system)2 mid-mounted 48" stroke jacks (behind cab)2 rear-mounted 36" stroke jacks(all with independent controls)

V-2095EXP SPECIFICATIONS

Operator-friendly controlpanel and hydraulic retractablesplit centralizer table.

Versa-Drill’s (patented) automated drill rod handling system;stores, handles and positions 500’ of on-board drill rod.

Stabilizing Jacks2 front-mounted 36" stabilizing jacks2 mid-mounted 36" stabilizing jacks

CentralizerRetractable hydraulic split centralizer tableincluding hydraulic breakout wrench and airoperated holding wrench. Table opening willaccommodate up to 20” casing

Automated Drill Rod Storage& Handling System (patented)

Automated drill pipe storage and control systemstores and positions 25 pieces (500’) of4 1/2” x 20’ drill pipe (only)

DIMENSIONSOverall Length

Derrick Down - 48’

Overall HeightDerrick up - 42’Derrick up w/tophead at full stroke - 61.5’Derrick down - 12’ 9”

Overall Width102”

OPTIONSRange III Casing Sheave Assembly

Provides the ability to handle up to a maximum47,500 lbs. of Range III casing

Auxiliary Hoists2,000 lb., 4,000 lb. or 8,000 lbs. auxiliary hydraulicwinch with swing jib

DHD Lubricator7-gallon capacity (electric)

Water Injectiona. *FMC Bean pump w/25 GPM capacityb. *CAT w/25 GPM capacityc. Bean pump w/75 GPM capacity*Optional foam pulse pump (available)

* Mud Pumps3 x 4 centrifugal w/mechanical seal(300 GPM/230 PSI)5 x 6 Piston type (hydraulic powered)5 1/2 x 8 piston type (hydraulic powered)*Rig or skid-mounted

Night Lighting System9 halogen lights functionally mounted on drill rig

Hammer Holder(s)*a. 6” Hammer holderb. 8” Hammer holderc. 10” Hammer holderd. 12” Hammer holder*Any combination of, no more than 3

Reverse Circulation Package

500 RPM Top Head with Wire Line Winch Package500 RPM with 1938 ft-lbs (high speed)360 RPM with 3158 ft-lbs (mid speed)221 RPM with 4378.8 ft-lbs (low speed)

750 RPM 2 SPEED Top Head withWire Line Winch Package:

750 RPM @ 1,300 ft. lbs.125 RPM @ 8,000 ft. lbs.

Secondary Rod Loader For Beyond 500'

TRUCK SPECIFICATIONSModel

Custom 2 man carrier with center man drive, 6x8(all wheel drive)

Wheelbase236”

GVWR86,000 lb.

Dual Front Axle Suspension (Twin Steer)Axle Rating 43,000 lb.Suspension 43,000(ea.) lb. leaf

Rear Axle SuspensionAxle Rating 46,000 lb. tandemsSuspension 46,000 lb. spring-mounted walking beam*Driver controlled locking axles

EngineCAT C-18 (630 HP)

TransmissionManual, 10-speed

Frame12 5/8” x 3/8” x 3 1/4”11 7/8” x 5/16” x 2 7/8” C-channel

BrakesAir brake system with anti-lock brakes

ClutchEaton self-adjusting clutch

Fuel Tank Capacity225 gallons (total)

Other SpecificationsAlcoa aluminum wheelsAluminum fuel tanksBrushed aluminum mirrorsPower steeringPower brakesJacobs engine brakeAM/FM radio w/CD playerAir conditioningDiesel fired engine heaterWater preheater

LAIBE CORPORATION1414 Bates Street • Indianapolis, IN 46201 U.S.A.Telephone: (317) 231-2250 • Fax: (317) 266-8426Toll Free (800) 942-3388 • www.laibecorp.com

Established 1962

We reserve the right to amend these specifications at any time without notice. The only warranty applicableis our standard written warranty applicable to the particular product and sale. We make no other warranty, expressed or implied.

V-2095EXP specifications effective 8/07.

Low Profile Carrier4x8 (all wheel drive), short wheelbase (236”),deluxe aluminum center mount one-man cab,aluminum wheels and fuel tanks(225 gallon fuel capacity).

Feed System (patented)Powerful direct coupled, hydraulic cylinder drivenfeed system. Eliminates use of chains, cables,sprockets and sheaves (95,000 lbs. pullback/34,000 lbs. pulldown).

Drill Rod Storage and Control System(patented)Totally automated handling, positioning and storageof all drill pipe, on board.

Drill/Truck Diesel PowerSingle power source with exclusive Versa-Drillpower distribution gear box/pump drive, providesdirect coupled thru-drive to power rig hydraulicsand air compressor.

Air CompressorsIngersoll-Rand self-contained modules (up to1250/350), environmentally protected, 145˚ambient cooling, lower noise levels.

Casing HandlingRetractable split centralizer table, sliding off holetop-head and swing jib that centers directly overthe hole, providing easier handling of up to20” diameter Range II casing.

* Available with optional Range III casing handlingassembly (see under options)

Design FeaturesVERSA-DRILL V-2095EXP®