2249 (b1 & b2)assets.coastercic.com/files/5268697.pdf · z - b1 (box1)- hardware pack is...
TRANSCRIPT
ASSEMBLY INSTRUCTIONSCOASTER FINE FURNITURE
METAL & WOOD FUTONBUNK BED
PAGE 1 OF 11
www.coastercompany.com
2249 (B1 & B2)
REVISION 0 : 11/13/2014REVISION 1 : 12/07/2016
ASSEMBLY TIPS :
1.Remove hardware from box and sort by size2.Please check to see that all hardware and parts are present prior to start of assembly.3.Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.2.This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATIONB1 (BOX 1)
AM
www.coastercompany.comPAGE 2 OF 11
ASSEMBLY INSTRUCTIONS
2 PCSLEFT BACK & RIGHT FRONT LOWERBED END LEG
BM 2 PCSLEFT FRONT & RIGHT BACK LOWERBED END LEG
ITEM: 2249 (B1 & B2)
2 PCSLEFT BACK & RIGHT FRONT UPPERBED END LEG
2 PCSLEFT FRONT & RIGHT BACK UPPERBED END LEG
CM
DM
2 PCSLOWER BED RAIL
1 PCFRONT UPPER BED RAIL
EM
FM
GM
HM
1 PCBACK UPPER BED RAIL
2 PCSGUARD RAIL
IM
JM
1 PCLADDER
3 PCSHOOK
ASSEMBLY TIME 45 MINUTES
B2 (BOX2)
ASSEMBLY TIPS :
1.Remove hardware from box and sort by size2.Please check to see that all hardware and parts are present prior to start of assembly.3.Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.2.This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION
www.coastercompany.comPAGE 3 OF 11
ASSEMBLY INSTRUCTIONS
KM
ITEM: 2249 (B1 & B2)
MM
1 PCBACK METAL FRAME
NM
2 PCSUPPER BED END
1 PCRIGHT LOWER BED END
1 PCSEAT METAL FRAME
OM
PM 1 PC
RIGHT TRANSMISSION 1 PCQM
LEFT TRANSMISSION
RM BED SLAT 20 PCS
LM 1 PCLEFT LOWER BED END
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
1
2
HARDWARE IDENTIFICATION
ASSEMBLY TIPS :
1.Remove hardware from box and sort by size.2.Please check to see that all hardware and parts are present prior to start of assembly.3.Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.2.This product is for home use only and not intended for commercial establishment.
PAGE 4 OF 11
3
4
7
8
9
10
SMALL LONG BOLT 24 PCS
SMALL MEDIUM BOLT 2 PCS
SMALL SHORT BOLT 16 PCS
CYLINDER NUT 26 PCS
METAL PIN 4 PCS
FLAT WASHER 2 PCS
PLASTIC CONNECTOR 40 PCS
SMALL ALLEN WRENCH 2 PCS
Z - B1 (BOX1)- Hardware pack is located in 2249 (B1)
12 WRENCH 1 PC
13 LADDER DOWEL 4 PCS
14 STOPPER GEAR 4 PCS
15 HEX NUT 12 PCS
16 METAL FRAME DOWEL 4 PCS
5 LARGE LONG BOLT 4 PCS
6 LARGE SHORT BOLT 8 PCS
11 BIG ALLEN WRENCH 1 PC
ITEM: 2249 (B1 & B2)
NOTE : RUBBER MALLET IS REQUIRED IN THE ASSEMBLY PROCESS ; HOWEVER MANUFACTURER DOES NOT PROVIDE THIS ITEM.
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 11
( LOWER BED )
ITEM: 2249 (B1 & B2)
3
LM
MM
10
3
BM
AM
3
MM
BM
AM
BM
14
14LM / MM
2.2
1.1 1.2
AM
LM
QM
15
PM
BM
12
12
15
AM
AMBM
5
11
5
MMLM11
2.1
FaceInside
FaceInside
STEP 1
STEP 2
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
PAGE 6 OF 11
ITEM: 2249 (B1 & B2)
MM
LM
EM
EM 10
10
14
BM
BM
AM
AM
4.1
4.2
QM
1215
QMPM
6
11
PM
NM
OM
OM
NM
16
AM
BM
OM
AM
BM
NM
STEP 3
( FUTON FRAME )STEP 4
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
PAGE 7 OF 11
OM
NM
JM
NM
OMAM
AM
BM
BM
ITEM: 2249 (B1 & B2)
KM
3
KM
10
3
KM
3
CM
DM
DM
CM
DMCM
JM
FaceInside
FaceInside
STEP 5
( UPPER BED )STEP 6
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
PAGE 8 OF 11
ITEM: 2249 (B1 & B2)
KM
KM
FM
HM
GM
CM
DM
DM
CM
10
1
4
HM
KM
KM
GM
FM
9
RM
RM
DM
DM
CM CM
8.1
8.2
FM GM
CM DM
FM GM
101
4HM
107.2
7.1 10
CM DM
RM
STEP 7
STEP 8
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
PAGE 9 OF 11
ITEM: 2249 (B1 & B2)
7
AM
CM
13
IM
DM
BM
10.2
FMIM
10.1
13
AM
CM
DM
BM
AM
CM
DM
BM
IM
FM
4108
102
STEP 9
STEP 10
PAGE 10 OF 11 www.coastercompany.com
ASSEMBLY INSTRUCTIONS
SAFETY WARNING
Coaster puts your child's safety as a Top Priority. Our bunk beds have been tested by anindependent laboratory and are certified to be in compliance with ASTM F-1427, "StandardConsumer Safety Specification for Bunk Beds" and U.S Government specification 16 Code ofFederal Regulations, parts 1213 and 1513.
1. Follow the information on the warning attached to the upper bunk end structure and onthe carton. Do not remove this label.
2. Always use the recommended size mattress or mattress support or both to help preventthe likelihood of entrapment or falls.
3. Surface of mattress must be at least five inches (127mm) below the upper edge ofguardrails.
4. Do not allow children less than six years of age to use the upper bunk.5. Prohibit more than one person on upper bunk.6. Periodically check and ensure that the guardrail, ladder and other components are in
their proper position, free from damage, and that all connectors are tight.7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.8. Always use the ladder for entering and leaving the upper bunk.9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.10. Use of a night light may provide added safety precaution for a child using upper bunk.11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of
the bed should be placed against the wall to prevent entrapment between the bed and thewall. (This applies only to bunk beds without two full-length guardrails.)
12. Always use guardrails on both long sides of the upper bunk.13. The use of water or sleep flotation mattress is prohibited.14. Keep these instructions for future reference.
STRANGULATION HAZARD:15. Never attach or hang items to any part of the bunk bed that are not designed for use
with the bed for example,but not limited to hooks, belts, and jump ropes.
SIZE OF MATTRESS AND FOUNDATION:Use only mattress which is 37 ½" - 38 ½" in width and 75" in length. The totalthickness of mattress and foundation (slat kit, bunk board, etc.) combined must notexceed 6"Note: There must be at least 5" from mattress sleeping surface to top edge of
guardrail.
REPLACEMENT PARTS:Replacement parts, including additional guardrails may be obtained from anyCOASTER Furniture Dealer.
ITEM: 2249 (B1 & B2)
PAGE 11 OF 11 www.coastercompany.com
ASSEMBLY INSTRUCTIONS
!
www.coastercompany.com 877-COASTER (265-7837)
ITEM: 2249 (B1 & B2)