•Efficientloadsensinghydraulicsystem •Closedloopswingdrivewithswingpriorityforquickcycles andhighperformancedelimbing

•Heavydutystrength-to-weightoptimizedboom •Robust,well-protectedcylindersandlargediameterpins •Designedforheavyliftingandhighdutycycledelimbing

•Highcapacityswingsystem •LargediameterbearingiscommontoTigercatswingmachines •Hightorquestartsandsmoothstops

•Widestance,forestdutyundercarriage •Longtrackframesforexcellentstabilityandflotation

BENEFITS AND ADVANTAGES:

•Rigid,fabricatedsubframe •Generouslysizedforexcellentstability

•Excellentserviceaccess •Valvesareconvenientlylocatedunderthewalk-upplatform •Platformaccesstodailyservicepoints •Swing-outdoortoaccesshydraulicpumpsandfilters

•Largespacious,wellfinishedoperator’sstation •Veryquietoperatingenvironmentwithexcellent climatecontrolandtintedwindows •Highvisibilityinstrumentationandenginemonitoringsystem

234/250BT234/T250B

LOADERS

234, 250B subframe mounted loaders T234, T250B track loaders

SPECIFICATIONS 234 250BDIMENSIONS LENGTH less boom and steps ............ HEIGHT transport ................................ WIDTH transport .................................. WEIGHT less grapple ..........................POWER ENGINE ............................................... FUEL CAPACITY ................................. COOLING ............................................

HYDRAULIC SYSTEM PUMP, MAIN ....................................... PUMP, SWING ..................................... RESERVOIR ........................................ FILTRATION ........................................ CYLINDER, HOIST .............................. CYLINDER, STICK .............................. CYLINDERS, STABILIZER ..................SWING SYSTEM SWING DRIVE ..................................... SWING BEARING ...............................

SUBFRAME LENGTH less steps ............................. SUPPORT BASE ................................. STABILIZER PADS .............................. END FRAMES .....................................

BOOM MAXIMUM REACH .............................. LIFT CAPACITY ...................................

ELECTRICAL BATTERY ............................................. ALTERNATOR ..................................... SYSTEM VOLTAGE ............................. LIGHTING ............................................

4 825 mm (190 in) ....................................................................... 3 430 mm (135 in) .......................................................................2 590 mm (102 in) .......................................................................14 850 kg (32,750 lb) ..................................................................

Cummins QSB6.7 Tier III,129 kW (173 hp) @ 1,800 rpm ..........Automatic idle down378 L (100 US gal) ......................................................................Aluminum side-by-side radiator, oil cooler ..................................and charge air cooler; High flow fanHYDRAULPiston...........................................................................................Piston, pressure compensated ....................................................227 L (60 US gal) ........................................................................(4) Spin-on, 7 micron full-flow .....................................................165 mm (6.5 in) diameter ............................................................140 mm (5.5 in) diameter ............................................................(4) 165 mm (6.5 in) diameter ......................................................

9 rpm variable, 360˚ continuous rotation ..................................... Swing priority and energy recovery1 190 mm (47 in) ball circle diameter; Internal gear teeth ......... Double reduction planetary gearboxSUBFRAME4 290 mm (169 in) ....................................................................... 3 810 mm x 4 650 m (150 in x 183 in) ........................................Bolt-on bi-directional lock valves ................................................. 585 mm x 710 mm (23 in x 28 in) ...............................................Fabricated from steel plate

9 750 mm (32 ft) ..........................................................................14 740 kg (32,500 lb) At 3,05 m (11 ft) .......................................5 670 kg (12,500 lb) At 7,6 m (25 ft)

(2) 950 CCA, 12 v .......................................................................80 amp ........................................................................................24 v ..............................................................................................Halogen, (2) boom mounted, ...................................................... separate cab-tire wiring to each (2) cab mounted; (1) service, engine house

5 005 mm (197 in)3 430 mm (135 in)2 590 mm (102 in)16 465 kg (36,300 lb)

Cummins QSB6.7 Tier III, 153 kW (205 hp) @ 1,800 rpmAutomatic idle down300 L (80 US gal)Aluminum side-by-side radiator, oil cooler and charge air cooler; High flow fanHYDRAULIC SYSTEMPistonPiston, pressure compensated227 L (60 US gal)(4) Spin-on, 7 micron full-flow178 mm (7 in) diameter 152 mm (6 in) diameter (4) 165 mm (6.5 in) diameter

9 rpm variable, 360˚ continuous rotation Swing priority and energy recovery1 190 mm (47 in) ball circle diameter; Internal gear teethDouble reduction planetary gearbox

4 290 mm (169 in) 3 810 mm x 4 650 mm (150 in x 183 in)Bolt-on bi-directional lock valves585 mm x 710 mm (23 in x 28 in)Fabricated from steel plate

9 750 mm (32 ft)15 875 kg (35,000 lb) At 3,35 m (11 ft)6 350 kg (14,000 lb) At 7,62 m (25 ft)

(2) 950 CCA, 12 v80 amp, 24 v24 v Halogen, (2) boom mounted, separate cab-tire wiring to each (2) cab mounted; (1) service in engine house

TIGERCAT RESERVES THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE

OPERATOR’S STATION CAB ........................................................ 760 mm (30 in) riser; Insulated, climate controlled, isolation mounted; Forward sloping, tinted polycarbonate windshield with wiper, washer and defroster fan; Sliding tinted side windows; 3-speed fan; Dome light; Electronic engine monitoring system with LCD display SEAT ....................................................... Heavy duty suspension, fully adjustable

OPERATOR CONTROLS BOOM ................................................... SWING .................................................. STABILIZERS .......................................OTHER STANDARD EQUIPMENT OPTIONAL EQUIPMENT

Electronic joystick ........................................................................

Foot operated pilot valve .............................................................Electric switches ..........................................................................

Delimber/bar saw slasher hydraulicsOPOPTIONAL EQUIPMENTLive heel; Grapple saw hydraulicsCircle saw slasher hydraulicsTigercat LG4053 grapple, continuous rotationOther grapples availableHID lighting package

Hydraulic joystick

Foot operated pilot valveElectric switches

Delimber/bar saw slasher hydraulics

Live heel; Grapple saw hydraulicsTigercat LG4053 grapple, continuous rotationOther grapples availableHID lighting package

DIMENSIONS with 760 mm (30 in) triple grouser shoes LENGTH less boom/ladders ............. 5 260 mm (207 in) ............................................................................. WIDTH .............................................. 3 430 mm (135 in) ............................................................................. HEIGHT ............................................ 4 290 mm (169 in) ............................................................................. With cab tilted for transport ............ 3 530 mm (139 in) ............................................................................. GROUND CLEARANCE ................... 700 mm (27 in) .................................................................................. WEIGHT less grapple ....................... 23 810 kg (52,500 lb) ........................................................................POWER ENGINE ............................................ Cummins QSB6.7 Tier III, 129 kW (173 hp) @ 1,800 rpm ............... Automatic idle down FUEL CAPACITY .............................. 300 L (80 US gal) .............................................................................. COOLING ......................................... Aluminum side-by-side radiator, oil cooler and charge air cooler........ FAN ................................................... High flow fan ......................................................................................HYDRAULIC SYSTEM PUMP, MAIN ..................................... Piston ..................................................................................................... PUMP, SWING .................................. Piston, pressure compensated .......................................................... RESERVOIR ..................................... 227 L (60 US gal) .............................................................................. FILTRATION ..................................... (4) Spin-on, 7 micron full-flow ........................................................... CYLINDER, HOIST ........................... 165 mm (6.5 in) diameter .................................................................. CYLINDER, STICK ........................... 140 mm (5.5 in) diameter ..................................................................UNDERCARRIAGE TRACK FRAMES.............................. F6-140 heavy duty forestry; Integral track guides/ramp angles ........ TRACK CHAIN ................................. F8/D6D 203 mm (8 in) pitch sealed and greased ............................. DRIVE ............................................... (2) Axial piston motors; Infinitely variable speed ............................... TRACTIVE EFFORT ......................... 187 kN (42,000 lbf) ............................................................................ GEARBOX ........................................ Triple reduction planetary type with brake ........................................ FRONT IDLER .................................. Hydraulic track adjuster; Spring shock absorber............................... ROLLERS, UPPER........................... (2) D6D excavator type ..................................................................... Optional .......................................... Bolt-on slides ..................................................................................... ROLLERS, LOWER .......................... (9) D6 single and double flange tractor type ............................................ TRACK SHOE .................................. 760 mm (30 in) triple grouser ........................................................... Optional .......................................... 915 mm (36 in) triple grouser ............................................................ 915 mm (36 in) triple grouser tri-trackBRAKES TRACK .............................................. Friction disc; Automatic spring applied, hydraulic release ....................... SWING .............................................. Friction disc; Manual spring applied, hydraulic release ....................ROTATING UPPER SWING DRIVE.................................. 9 rpm variable, 360˚ continuous rotation ........................................... Swing priority and energy recovery SWING BEARING ............................ 1 190 mm (47 in) ball circle diameter ................................................

Internal gear teeth; Double reduction planetary gearbox ENCLOSURE ................................... Walk-up platform; 1 360 kg (3,000 lb) counterweight .......................BOOM MAXIMUM REACH ........................... 9 750 mm (32 ft) ................................................................................ LIFT CAPACITY ................................ at 3,05 m (11 ft) 14 740 kg (32,500 lb) ............................................ at 7,6 m (25 ft) 5 670 kg (12,500 lb) (SD) MAXIMUM REACH .................. N/A ..................................................................................................... LIFT CAPACITY ................................ N/A .....................................................................................................

DIMENSIONS5 260 mm (207 in)3 430 mm (135 in)4 320 mm (170 in)3 530 mm (139 in)760 mm (30 in)25 445 kg (56,100 lb)POWER Cummins QSB6.7 Tier III, 153 kW (205 hp) @ 1,800 rpmAutomatic idle down300 L (80 US gal) Aluminum side-by-side radiator, oil cooler and charge air coolerHigh flow fanHYDRAULIC SYSTEMLoad sensing, variable displacement pistonPressure compensated piston227 L (60 US gal)(4) spin-on, 7 micron full-flow178 mm (7 in) diameter 152 mm (6 in) diameterUNDERCARRIAGEF6-140 heavy duty forestry; Integral track guides and ramp anglesF8/D6D 203 mm (8 in) pitch sealed and greased(2) Axial piston motors; Infinitely variable speed222 kN (50,000 lbf)Triple reduction planetary type with brakeHydraulic track adjuster; Spring shock absorber(2) D6D excavator typeBolt-on slides(9) D6 single and double flange tractor type760 mm (30 in) triple grouser 915 mm (36 in) triple grouser915 mm (36 in) triple grouser tri-trackBRAKES Friction disc; Automatic spring applied, hydraulic releaseFriction disc; Manual spring applied, hydraulic releaseSWING SYSTEM9 rpm variable, 360˚ continuous rotationSwing priority and energy recovery 1 190 mm (47 in) ball circle diameter Internal gear teeth; Double reduction planetary gearboxWalk-up platform; 2 950 kg (6,500 lb) counterweightBOOM9 750 mm (32 ft)at 3,35 m (11 ft) reach 15 875 kg (35,000 lb)at 7,62 m (25 ft) reach 6 350 kg (14,000 lb)11 000 mm (36 ft)at 4,57 m (15 ft) reach 9 980 kg (22,000 lb)at 7,62 m (25 ft) reach 5 445 kg (12,000 lb)

SPECIFICATIONS T234 T250B

ELECTRICAL BATTERY .......................................... (2) 950 CCA, 12v ALTERNATOR .................................. 80 amp, 24 v SYSTEM VOLTAGE ......................... 24 v LIGHTING ......................................... Halogen, (2) boom mounted, separate cab-tire wiring to each; (2) cab mounted; (1) service in engine house Optional .......................................... HID lighting packageOPERATOR’S STATION CAB .................................................. 760 mm (30 in) riser; Insulated, climate controlled, isolation mounted; Forward sloping, tinted polycarbonate windshield with wiper, washer and defroster fan; Sliding tinted side windows; 3-speed fan; Dome light; Electronic engine monitoring system with LCD display SEAT ................................................. Heavy duty suspension, fully adjustable

OPERATOR CONTROLS BOOM ............................................... Electronic joystick ............................................................................. SWING/DRIVE .................................. Foot operated, pilot valve ..................................................................OPTIONAL EQUIPMENT LG4053 grapple, continuous rotation (other grapples available) Grapple saw, delimber/slasher or circle saw slasher hydraulics Live Heel; 1 575 mm (62 in) 'mill yard' cab riser 2 040 kg (4,500 lb) counterweight

Hydraulic joystick Foot operated, pilot valveOPTIONAL EQUIPMENTLG4053, butt'n top, power clam grapples (other grapples available)Grapple saw, delimber/bar saw slasher hydraulicsLive Heel; Cylinder lock valves; 1 675 mm (66 in) 'mill yard' cab riser3 630 kg (8,000 lb) and 4 535 kg (10,000 lb) counterweightSuperDuty (SD) package: 11 m (36 ft) boom with live heel

F6155 undercarriage

TIGERCAT RESERVES THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE

(7042) 3 0711•Tig

Platform access to the engine compartment and daily service points

All valves are located underneath the walk-up platform for easy access

Excellent service access...

E-mail: comments@tigercat.com Internet: www.tigercat.comTel: (519) 753-2000Fax: (519) 753-8272

54 Morton Ave. EastBrantford, Ontario Canada, N3R 7J7 Mail: Box 637 N3T 5P9

Large diameter swing bearing; closed loop swing drive for added performance and efficiency

Large pins and thick steel plate at boom pivots for long, trouble-free service life

Durable construction...

9,75 m (32 ft) 2,67m (8 ft 9 in)

234 LOADER

2,95 m(9 ft 8 in)

2,79 m (9 ft 2 in)

250B LOADER9,75 m (32 ft)

4,32 m (14 ft 2 in)

3,02 m (9 ft 11 in)

T250B LOADERT234 LOADER

9,75 m (32 ft)

9,75 m (32 ft) 3,02 m (9 ft 11 in)

234High performance and excellent fuel economy. The 234 is best suited to bar saw slashing and pull-through delimbing in mature softwood.

250BIdeal for high production merchandising and loading. The strong boom set handles large hardwood and the toughest pull-through delimbing applications.

T234An all-around track loader for merchandising, sorting and light duty shovel logging. Combines high performance with fuel efficiency.

T250BAchieves low cost per tonne in high cycle merchandising and loading applications and light duty shovel logging.

Note: 250B/T250B not available in USA