23__brushless dc motors with integrated controller
TRANSCRIPT
____
Brushless DC Motors with Intergrated Controllers
AMETEK integrated brushless motors/drive pagckage simpli�es the installation and use of a brushless motor. Interconnection cabling, set up, noise and compatibilty issues are all but eliminated with this approach.
AMETEK integrated brushless motors are designed with a wide range of voltage inputs, power outputs, optional control panel, gearboxes, and mounting con�guration making these packages great candi-dates for variable speed control applications. AMETEK controllers provide smooth, quiet and e�cient operation over a wide range of speeds.
Series Diameter Torque RPM Max.
Available Motor Options
Gears Brakes Miscellaneous
G30
A
G42
A
G42
B
B30
A
B49
A
B5
Cont
rol P
anel
Cabl
es
1.7" (43 mm) 1.72" (43.6mm) 3 - 11 ozin 15,000 C C C C3.0" (76 mm) 3" (76mm) 55 - 90 ozin 6,000 CMA34000 3.86" (98mm) 129 - 292 ozin 3,600 X X X
3.87" (98 mm) 3.87" (98 mm) 35 - 70 ozin 6,000 C5.25" (133 mm) 5.25" (133 mm) 100 - 864 ozin 5,000
Brushless DC Motors With Integrated Controller
X - Available Option C - Consult Factory for Availability
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
1.7" x 2.2"(43mm x 55mm) Series
Part/Model Number
Specification Units 071125
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
3.00.0212
Speed @ Cont. Torque RPM 2500Current @ Cont. Torque Amps (A) 0.26Continuous Output Power Watts (W) 6.0
Motor Constantoz-in/sqrt WNm/sqrt W
1.10.008
Torque Constantoz-in/ANm/A
8.480.0599
Voltage ConstantV/krpmV/rad/s
6.270.0599
Terminal Resistance Ohms 61.00Inductance mH 25.00No-Load Current Amps (A) 0.04No-Load Speed RPM 4025Peak Current Amps (A) 0.9
Peak Torqueoz-inNm
8.00.0565
Electrical Time Constant ms 0.41Mechanical Time Constant ms 49.0Thermal Resistance Celsius/W 5.7Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m24.10E-62.9E-8
Weight (Mass)ozg
8.0226.8
Performance (071125)
500 0.11000 0.21500 0.3
2000 0.42500 0.53000 0.6
3500 0.74000 0.84500 0.95000 1.0
000
Torque (oz-in)6 8 01
Spee
d (r
pm)
Curr
ent (
A)
• Ferrite Magnet• Integrated Controller
• 15.0-32.0 VDC• Aluminum Housing
• High Eff. Mode
• Sealed Ball Bearings• 4-Pole Rotor
• Gearboxes• Brakes
Standard Features
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Recorded with max. winding temperature at 25°C ambient, mounted to a 5.0”x 5.0”x 0.25” heat sink.
Connection Chart
Color/Pin FunctionRed
Black+27.6 VDC
ReturnCurrentSpeed
2 4
F 1____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
3.0" x 4.18" (76mm x 106mm) Series
Part/Model Number
Specification Units 150218-00
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
55.00.3883
Speed @ Cont. Torque RPM 2750Current @ Cont. Torque Amps (A) 5.00Continuous Output Power Watts (W) 113
Motor Constantoz-in/sqrt WNm/sqrt W
23.90.169
Torque Constantoz-in/ANm/A
11.480.081
Winding Resistance Ohms 0.23
Voltage ConstantV/krpmV/rad/s
8.490.0811
Inductance mH 0.69No-Load Current Amps (A) 0.70No-Load Speed RPM 3250Peak Current Amps (A) 13.0
Peak Torqueoz-inNm
140.00.9884
Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.00674.73E-5
Weight (Mass)ozg
521474.2
Performance (150218-00)
500 2
1000 4
1500 6
2000 8
2500 10
3000 12
3500 14
000
Torque (oz-in)52 05 150100 12575
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• IP42• Aluminum Housing
• Sealed Ball Bearings• 8-Pole Rotor
• Gearboxes (consult factory) • Brakes
Standard Features
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Recorded with max. winding temperature at 25°C ambient, mounted to a 5.0”x 5.0”x 0.25” heat sink.
Connection Chart
Color/Pin FunctionRed
BlackOrange
+27.6 VDCReturn
Low SpeedCurrentSpeed
F 2____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
3.0" x 4.5" (76mm x 115mm) Series
Part/Model Number
Specification Units 150209-00
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
90.00.6354
Speed @ Cont. Torque RPM 4450Current @ Cont. Torque Amps (A) 13.00Continuous Output Power Watts (W) 300
Motor Constantoz-in/sqrt WNm/sqrt W
19.10.135
Torque Constantoz-in/ANm/A
6.820.0481
Winding Resistance Ohms 0.13
Voltage ConstantV/krpmV/rad/s
5.040.0481
Inductance mH 0.21No-Load Current Amps (A) 1.00No-Load Speed RPM 5475Peak Current Amps (A) 20.0
Peak Torqueoz-inNm
130.00.9178
Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.00886.21E-5
Weight (Mass)ozg
571615.9
Performance (150209-00)
1000 5
2000 10
3000 15
4000 20
5000 25
6000 30
000
Torque (oz-in)52 05 150100 12575
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• IP64• Aluminum Housing
• Sealed Ball Bearings• 8-Pole Rotor
Standard Features
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heat sink.
Connection Chart
Color/Pin FunctionRed
Black+27.6 VDC
ReturnCurrentSpeed
• Gearboxes (consult factory)
Complimentary Products
F 3____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
3.0" x 4.8" (76mm x 123mm) Series
Part/Model Number
Specification Units 150072-00
Supply Voltage VDC 13.8
Continuous Torqueoz-inNm
45.00.3177
Speed @ Cont. Torque RPM 3425Current @ Cont. Torque Amps (A) 10.00Continuous Output Power Watts (W) 170
Motor Constantoz-in/sqrt WNm/sqrt W
6.20.044
Torque Constantoz-in/ANm/A
4.720.0333
Voltage ConstantV/krpmV/rad/s
3.490.0333
Winding Resistance Ohms 0.58Inductance mH 0.10No-Load Current Amps (A) 1.30No-Load Speed RPM 3950Peak Current Amps (A) 16.0
Peak Torqueoz-inNm
75.00.5295
Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.00876.14E-5
Weight (Mass)ozg
81.62313.3
Performance (150072-00)
500 21000 4
1500 62000 7
2500 103000 123500 14
4000 164500 18
000
Torque (oz-in)20 04 06 08
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• IP65• Aluminum Housing
• Sealed Ball Bearings• 8-Pole Rotor
Standard Features
• Gearboxes (consult factory) • Brakes • 28 VDC Input
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heat sink.
Connection Chart
Color/Pin FunctionRed
Black+13.8 VDC
ReturnCurrentSpeed
F 4____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34132, 32 Series
157 mm6.18 inch
32 mm1.25 inch
12.7 mm0.5 inch
98.43 mm3.875 inch
5.54 mm0.218 inch
82.6 mm3.25 inch
73.03 mm2.875 inch
Part/Model Number
Specification Units MA34132
Voltage AC 120
Power RatingWatts
Hp1680.23
No-Load Speed RPM 1750
Continuous Torquelb-inNm
8.100.915
Continuous Output Power Watts (W) 168Current Amps (A) 2.0
Rotor Inertialb-in-sec2
kg-m2.000889.94E-5
LengthInches
mm6.18157
WeightLbsKg
6.12.8
Frame SizeInches
mm3.2582.6
Performance @ 120VAC
• External INHIBIT (/ENABLE) input
• Speed Monitor output
• Fault Protection
• FAULT (READY) monitor output
• TENV and IP50 construction• Speed Command Option
• Direction of rotation option
• External faul reset
Standard Features
• Brakes• Gearboxes (consult factory) • Cables
Complimentary Products
00 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
1
2
3
4
5
6
7
8
9
Speed (KRPM)
Torq
ue (l
b-in
)
0.00
0.03
0.05
0.08
0.11
0.13
0.16
0.19
0.21
0.24
Pow
er (H
P)
Torque (lb-in)Power (HP)
F 5____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34232, 32 Series
157 mm6.18 inch
32 mm1.25 inch
12.7 mm0.5 inch
98.43 mm3.875 inch
5.54 mm0.218 inch
82.6 mm3.25 inch
73.03 mm2.875 inch
Part/Model Number
Specification Units MA34232
Voltage AC 120
Power RatingWatts
Hp2680.36
No-Load Speed RPM 3450
Continuous Torquelb-inNm
6.500.734
Continuous Output Power Watts (W) 265Current Amps (A) 4.0
Rotor Inertialb-in-sec2
kg-m2.000889.94E-5
LengthInches
mm6.18157
WeightLbsKg
6.12.8
Frame SizeInches
mm3.2582.6
Performance @ 120VAC
• External INHIBIT (/ENABLE) input
• Speed Monitor output
• Fault Protection
• FAULT (READY) monitor output
• TENV and IP50 construction• Speed Command Option
• Direction of rotation option
• External faul reset
Standard Features
• Brakes• Gearboxes (consult factory) • Cables
Complimentary Products
00 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6
1
2
3
4
5
6
7
8
9
Speed (KRPM)
Torq
ue (l
b-in
)
0.00
0.03
0.05
0.08
0.11
0.13
0.16
0.19
0.21
0.24
Pow
er (H
P)
Torque (lb-in)Power (HP)
F 6____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34134, 34 Series
183 mm7.18 inch
32 mm1.25 inch
12.7 mm0.5 inch
98.43 mm3.875 inch
5.54 mm0.218 inch
82.6 mm3.25 inch
73.03 mm2.875 inch
Part/Model Number
Specification Units MA34134
Voltage AC 120
Power RatingWatts
Hp2800.38
No-Load Speed RPM 1750
Continuous Torquelb-inNm
13.401.514
Continuous Output Power Watts (W) 278Current Amps (A) 8.0
Rotor Inertialb-in-sec2
kg-m2.001441.63E-4
LengthInches
mm7.18
182.4
WeightLbsKg
8.43.8
Frame SizeInches
mm3.2582.6
Performance @ 120VAC
• External INHIBIT (/ENABLE) input
• Speed Monitor output
• Fault Protection
• FAULT (READY) monitor output
• TENV and IP50 construction• Speed Command Option
• Direction of rotation option
• External fault reset
Standard Features
• Brakes• Gearboxes (consult factory) • Cables
Complimentary Products
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.81.6
Speed (KRPM)
Torq
ue (l
b-in
)
Pow
er (H
P)
0
2
4
6
8
10
12
14
0.00
0.06
0.11
0.17
0.23
0.29
0.34
0.40
Torque (lb-in)Power (HP)
F 7____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34236, 36 Series
263.4 mm10.37 inch
32 mm1.25 inch
12.7 mm0.5 inch
98.43 mm3.875 inch
5.54 mm0.218 inch
82.6 mm3.25 inch
73.03 mm2.875 inch
Part/Model Number
Specification Units MA34236
Voltage AC 120
Power RatingWatts
Hp7461
No-Load Speed RPM 3450
Continuous Torquelb-inNm
18.302.068
Continuous Output Power Watts (W) 747Current Amps (A) 8.0
Rotor Inertialb-in-sec2
kg-m2.002062.33E-4
LengthInches
mm10.37263.4
WeightLbsKg
10.904.9
Frame SizeInches
mm3.2582.6
Performance @ 120VAC
• External INHIBIT (/ENABLE) input
• Speed Monitor output
• Fault Protection
• FAULT (READY) monitor output
• TENV and IP50 construction• Speed Command Option
• Direction of rotation option
• External fault reset
Standard Features
• Brakes• Gearboxes (consult factory) • Cables
Complimentary Products
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Speed (KRPM)
Torq
ue (l
b-in
)
Pow
er (H
P)
02468
101214161820
0.000.110.220.330.440.550.660.770.880.991.10
Torque (lb-in)Power (HP)
F 8____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
3.87" x 6.0" (98mm x 152mm) Series
Part/Model Number
Specification Units 150297-01 150296-01
Supply Voltage VDC 13.80 27.6
Continuous Torqueoz-inNm
35.00.2471
35.00.2471
Speed @ Cont. Torque RPM 3360 3465Current @ Cont. Torque Amps (A) 9.40 5.20Continuous Output Power Watts (W) 87.0 89.7
Motor Constantoz-in/sqrt WNm/sqrt W
8.40.059
9.00.064
Torque Constantoz-in/ANm/A
4.410.0311
8.580.0606
Voltage ConstantV/krpmV/rad/s
3.430.0328
6.810.065
Winding Resistance Ohms 0.25 0.95Inductance mH 0.18 0.70No-Load Current Amps (A) 2.50 1.40No-Load Speed RPM 4025 4050Peak Current Amps (A) 44.5 28.8
Peak Torqueoz-inNm
208.01.4685
254.01.7932
Rotation - CCW (SE) CCW (SE)Max. Winding Temperature Celsius 105 105
Rotor Inertiaoz-in-sec2
kg-m20.00866.07E-5
.00866.07E-5
Weight (Mass)ozg
962721.6
962721.6
Performance (150297-01)
500 11000 21500 32000 42500 53000 63500 74000 8
5000 104500 9
000
Torque (oz-in)10 02 03 04
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• Sealed to IP65• Aluminum Housing
• Sealed Ball Bearings• 4-Pole Rotor
Standard Features
• Gearboxes (consult factory)• Brakes (consult factory)
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Continuous Torque Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x12.0”x0.50” heatsink.
Connection Chart
Color/Pin FunctionRed
Black+ VDCReturn
CurrentSpeed
F 9____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
3.87" x 6.68" (98mm x 170mm) Series
Part/Model Number
Specification Units 071215000
Supply Voltage VDC 74.00
Continuous Torqueoz-inNm
70.00.4942
Speed @ Cont. Torque RPM 3400Current @ Cont. Torque Amps (A) 3.51Continuous Output Power Watts (W) 176.0
Motor Constantoz-in/sqrt WNm/sqrt W
11.10.078
Torque Constantoz-in/ANm/A
24.100.1701
Voltage ConstantV/krpmV/rad/s
17.350.1657
Winding Resistance Ohms 4.72Inductance mH 3.90No-Load Current Amps (A) 0.30No-Load Speed RPM 4265Peak Current Amps (A) 14.80
Peak Torqueoz-inNm
347.02.4498
Rotation - CCW (LE)Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.010
7.06E-5
Weight (Mass)ozg
1002835
Performance (071215000)
500 0.5
1000 1.01500 1.52000 2.0
2500 2.53000 3.03500 3.5
4000 4.04500 4.5
000
Torque (oz-in)20 04 06 08
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• Sealed to IP65• Aluminum Housing
• Sealed Ball Bearings• 4-Pole Rotor
Standard Features
• Gearboxes (consult factory)• Brakes (consult factory)
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Continuous Torque Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heatsink.
Connection Chart
Color/Pin FunctionRed
Black+ VDCReturn
CurrentSpeed
F 10____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
5.25" x 6.76" (133mm x 172mm) Series
Part/Model Number
Specification Units 150203-01
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
1000.706
Speed @ Cont. Torque RPM 3525Current @ Cont. Torque Amps (A) 11.70Continuous Output Power Watts (W) 261
Motor Constantoz-in/sqrt WNm/sqrt W
28.90.204
Voltage ConstantV/krpmV/rad/s
7.080.0676
Winding Resistance Ohms 0.11Winding Inductance mH 0.24No-Load Current Amps (A) 1.70No-Load Speed RPM 3900Peak Current Amps (A) 16.5
Peak Torqueoz-inNm
1501.059
Electrical Time Constant ms 2.18Mechanical Time Constant ms 2.9Rotation - CCW (SE)Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.01681.19E-4
Weight (Mass)ozg
2888164.7
Performance (150203-00)
500 2
1000 41500 62000 8
2500 103000 123500 14
4000 164500 18
000
Torque (oz-in)25 50 57 001 521
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• Sealed to IP65• Aluminum Housing
• Sealed Ball Bearings• 4-Pole Rotor
Standard Features
• Gearboxes (consult factory)• NEMA 56 Mounting
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Continuous Torque Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heatsink.
Connection Chart
Color/Pin FunctionRed
Black+27.6 VDC
Return
CurrentSpeed
F 11____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
5.25" x 8.78" (133mm x 223mm) Series
Part/Model Number
Specification Units 150214-00
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
3202.2592
Speed @ Cont. Torque RPM 1875Current @ Cont. Torque Amps (A) 20.00Continuous Output Power Watts (W) 444
Motor Constantoz-in/sqrt WNm/sqrt W
54.00.381
Voltage ConstantV/krpmV/rad/s
12.400.1184
Winding Resistance Ohms 0.11Winding Inductance mH 0.32No-Load Current Amps (A) 1.20No-Load Speed RPM 2225Peak Current Amps (A) 30.0
Peak Torqueoz-inNm
5043.5582
Electrical Time Constant ms 0.01Mechanical Time Constant ms 1.5Rotation - CCW (SE)Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.02992.11E-4
Weight (Mass)ozg
2968391.5
Performance (150214-00)
500 5
1000 10
1500 15
2000 20
2500 25
000
Torque (oz-in)100 200 400300
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• Sealed to IP65• Aluminum Housing
• Sealed Ball Bearings• 4-Pole Rotor
Standard Features
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Continuous Torque Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heatsink.
Connection Chart
Color/Pin FunctionRed
BlackOrange
+27.6 VDCReturn
Low Speed
CurrentSpeed
• Gearboxes (consult factory)• NEMA 56 Mounting
F 12____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com
Brushless DC Motors with Integrated Controller
5.25" x 10.15" (133mm x 256mm) Series
Part/Model Number
Specification Units 150215-00
Supply Voltage VDC 27.6
Continuous Torqueoz-inNm
8646.0998
Speed @ Cont. Torque RPM 1700Current @ Cont. Torque Amps (A) 48.50Continuous Output Power Watts (W) 1086
Motor Constantoz-in/sqrt WNm/sqrt W
86.30.609
Voltage ConstantV/krpmV/rad/s
12.550.1199
Winding Resistance Ohms 0.05Winding Inductance mH 0.20No-Load Current Amps (A) 2.50No-Load Speed RPM 2200Peak Current Amps (A) 55.5
Peak Torqueoz-inNm
10257.2365
Electrical Time Constant ms 0.01Mechanical Time Constant ms 1.4Rotation - CCW (LE)Max. Winding Temperature Celsius 105
Rotor Inertiaoz-in-sec2
kg-m20.07265.13E-4
Weight (Mass)ozg
47513466
Performance (150215-00)
500 10
1000 20
1500 30
2000 40
2500 50
000
Torque (oz-in)008 0001006004002
Spee
d (r
pm)
Curr
ent (
A)
• Neodymium Magnets• Integrated Controller
• Sealed to IP64• Aluminum Housing
• Sealed Ball Bearings• 4-Pole Rotor
Standard Features
• Gearboxes (consult factory)
Complimentary Products
Notes
1 All values specified at 25°C ambient temperature and without heat sink.2 Peak values are theoretical and supplied for reference only.3 Continuous Torque Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50” heatsink.
Connection Chart
Color/Pin FunctionStud (+)Stud (-)White
+27.6 VDCReturn
Low Speed
CurrentSpeed
F 13____
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlledlaboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right torevise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS343 Godshall Drive, Harleysville, PA 19438USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258www.ametektip.com