25085 e plastograph ec
TRANSCRIPT
-
8/13/2019 25085 E Plastograph EC
1/2
Plastograph EC plusTorque Rheometer for applicational investigationsand simulation in laboratory
.. . where quality is measured.
-
8/13/2019 25085 E Plastograph EC
2/2
25085-E
/BrabenderC/
Plastog
raph
EC/
01
/2013
Plastograph EC / Plastograph EC plus
Brabender Plastograph ECand EC plus serve for testing theprocessibility of thermoplastics,
thermosets, elastomers, ceramicmolding materials, fillers, pigments,and many other plastic and plastifi-able materials under practice-ori-ented conditions, cost-effectively,reliably, with little expenditure oftime and material.
The Plastograph EC plus is theadvanced version for measuring mi-xers and extruders. Use the extru-der attachment for single screwand conical twin screw extruders.
Profit from the reliability and
practice orientation of both measu-ring systems for testing and docu-menting the processibility of a largevariety of materials.
CAN bus system
The integration of a modern field-bus system into the newPlastograph EC / EC plusmakes working a real breeze: per-manent communication betweencontrol modules, sensors, and com-puter, easy wiring of the systemcomponents, manifold expansionfacilities - just plug and play.
Profit from state-of-the-art soft-ware packages for recording, repre-senting, and evaluating yourmeasuring data and documentingyour tests.
For manual operation, all importantcontrol data can be read on a con-trol panel at the Plastograph ECand EC plus
Modular configuration
Multi-master system withself-intelligence modules
Self-validation
Real-time transmission ofevents and actual values
32-bit software for allcurrent Windows versions
Real multitasking
Measuring Heads
Extrusiograph
/ ConicalTwin Screw Extruder
Brabender measuring extrudersand the CTSE are interchangeablemeasuring heads which, in con-nection with Plastograph ECplus, serve for testing the extruda-bility of polymers and for studyingproblems occurring in research anddevelopment as well as in practicalapplication. The counter-rotatingtwin screw extruder CTSE offers alladvantages of counter-rotating
twin screw extruders such as:forced feed, high output at shortresidence time, self-cleaning andcareful plastification.
Measuring Mixers
Brabender series 30 and 50mixers as well as planetary mixers,are easily attached as measuringheads to the Plastograph
ECand simulate on a laboratory scaleprocesses like compounding, mi-xing, masticating, etc. that are rele-vant for production and processingof polymers and other plastic andplastifiable material.
Plastograph EC / Plastograph
EC plus
Power: 3.8 kW
Measuring range: 200 Nm
Torque deviation: 0.15 %
Speed range: 0.2 - 150 min-1
Speed deviation: 0.2 % through digital feedback
Temperature control:Plastograph EC: 3 zonesPlastograph
EC plus: 6 zones
Mains:3 x 400 V, 50/60 Hz, 32 A, +N +PEoptional: 3 x 200 V, 50/60 Hz, +N +PE, 32 Awithout transformer
Dimensions:(W x H x D)
650 mm x 480 mm x 1150 mm
Weight: 150 kg
Brabender Plastograph ECand EC plus are the economicaltable-top versions of an univer-sal torque rheometer applied allover the world for investigationand simulation in laboratories.
The Plastograph EC and ECplus are the perfect measuringdrives for practice-oriented mea-surements with the Brabender
measuring heads for
ModularIntelligentExpansible
CAN bus control panelfor parameter settings & digital anddiagram value indication
Brabender GmbH & Co. KG
Kulturstr. 51-55 47055 Duisburg GermanyTel.: +49 203 7788-0 Fax: +49 203 7788-101E-Mail: [email protected]
Brabender agencies all over the world 2013 Brabender GmbH & Co. KG
All trademarks are registered.Subject to change of design and technicalmodification without notice.
Conical TwinScrew Extruder
MixerType 30/50
Planetary mixer P 600
Single ScrewExtruder Typ 19
Raw material and recipedevelopment
Material testing
Quality control parallel toproduction
Optimization of theproduction process
Laboratory-scale pro- duction of samples forfurther investigations