25.437"8.500"8.4375" 8.500"

11"

Asset No. 78026

QC�______ ______ Client�_____ _____

Date ____/____/____ Proof No.�______

25 50 100 25 50 100

25

2

2 50 100 25

2

2 50 100

C M Y K 10-03-12_sh_dry_fog.qxp REMAY 78026TRIM: 25.4375" x 11.000" BLEED: 0.1250" Digital/IAM

FINISH: 8.5000" x 11.000"

World-Class Product LinePPG offers a broad and deep product line second to none in the industry. For every application and at every price point, there is a PPG coating ideally suited for the job. Each of our products is engineered–and guaranteed– to deliver optimum performance and efficiency. Please visitwww.ppgpittsburghpaints.com or www.ppgporterpaints.com for a complete product listing orcontact your PPG representative for additional information.

Pitt-Tech® EDF, Exterior Water-Based Acrylic Dry-FogPitt-Tech EDF is a single-component, semi-gloss, water-based acrylic dry-fog. This low-odor, low-VOCcoating is designed to reduce the cleanup on surfaces not intended to be coated during the application on surrounding structures. Formulated to provide a direct-to-metal application and excellent dry-fallproperties, Pitt-Tech EDF is easy to apply and has exceptional color and gloss retention. Pitt-Tech EDF driesto touch in 30 minutes and is ideal for use on water towers, building exteriors and manufacturing andproduction facilities.

PPG Pure Performance® Interior Latex The zero-VOC content of PPG Pure Performance eliminates the detrimental impact on air quality andenables a space to be painted without damage to the occupant – while delivering the performance you’vecome to expect. This low-odor paint allows you to paint a room today and occupy the same room bytonight. PPG Pure Performance is ideal for commercial settings because routine maintenance can beconducted without closing the section of the facility. And its anti-microbial properties resist mold andmildew on the paint film.

PPG Speedhide®

Recognized by facility managers and building professionals nationwide, this widely specified, extensiveline of products meets the most demanding commercial maintenance needs. Durability, ease ofapplication, wide range of products, economical pricing and low-VOC formulas make PPG Speedhidethe product of choice for commercial painters. A variety of products are available which meet LEED, MPIand the Collaborative for High Performance Schools (CHPS) standards.

PPG Pitt-Glaze® WB1The washable, stain- and abrasion-resistant finish of PPG Pitt-Glaze WB1 Water-Borne Epoxy stands up tofrequent scrubbing and makes it the ideal coating for high-traffic areas in a commercial facility. There is nomixing or measuring with this single-component, pre-catalyzed, water-borne acrylic epoxy, providingconvenience and efficiency. There is no limited pot life and application and cleanup is fast and easy. With its low-VOC content and mild odor, the water-borne epoxy ensures the service needed to avoidfacility disruptions.

Anti-Slip Safety Flooring Slips and falls are a leading cause of injury at work, in public and at home. Our OSHA- and ADA-compliant anti-slip product line can help improve traction in most areas of your facility. The availableproducts have the application range from light pedestrian traffic to heavy rolling equipment. Theseproducts are designed for indoor and outdoor use, and both water- and solvent-based technologies areavailable depending on your need for chemical resistance. In addition, the rapid dry times allow forminimal downtime and fast return to service.

PPG ARCHITECTURAL COATINGS • One PPG Place • Pittsburgh, PA 15272 • Technical Service: 1-800-441-9695Architect/Specifier: 1-888-PPG-IDEA • www.ppgpittsburghpaints.com • www.ppgporterpaints.com

P16702

A Dry-Fog Lineup for All Interior Coating ChallengesPPG Speedhide line of dry-fogs offers three different technologies (low-VOCwater-based, alkyd and epoxy ester) tomeet any interior coating challenge.Speedhide dry-fogs are formulated toprovide maximum protection againstcorrosion, abrasion, impact and chemicalresistance while meeting the needs ofdifficult application environments.

PPG’s dry-fog coatings are designed foreconomical painting of interior ceilingdecks, bar joists, sidewalls and otheroverhead substrates: drying time isextremely quick so that the overspraydroplets dry before they make contact with the floor. And these coatings deliverdurability, protection and aesthetic appeal for years to come.

PPG Speedhide Alkyd Dry-Fogs

PPG Speedhide Alkyd Dry Fogs are high-hiding, quick-dryingcoatings designed for spray application on ceilings and walls.Preferred for their lower cost, these products tolerate smallamounts of dirt on a surface better than latex and adherebetter to dirty or chalky surfaces. These alkyd dry-fogs also holdrust on steel and seal stains better than their latex counterparts.

Alkyd dry-fogs are also available in the premium SpeedhideSUPER TECH line, which adheres to a variety of substratesincluding pre-primed decking. Speedhide SUPER TECH Alkyd Dry-Fogs are lower in odor when compared to mostcompeting alkyd products.

Why PPG Speedhide Interior Alkyd Dry-Fogs?• Excellent hide covers surface imperfections

• Dry falls at 10 feet

• Tolerates small amounts of dirt on surface

• Resistant to rust on steel

• Lowest price dry-fog option

• Excellent coverage saves money and requires less material

• Adheres to a variety of surfaces

• Light-reflecting white increases lighting efficiency

• Speedhide SUPER TECH is a low-odor alkyd

• Speedhide SUPER TECH adheres to pre-primed decking

Speedhide Interior Alkyd Dry-FogCODE SHEEN PRODUCT NAME SIZES

6-160XI* Flat White 5s6-161XI Low Lustre White 5s, 55s

(Semi-Gloss)UC87062 Flat Black 5s

Speedhide SUPER TECH Interior Alkyd Dry-FogCODE SHEEN PRODUCT NAME SIZES

6-150XI* Flat White 5s6-151XI Eggshell White 5s

Epoxy Ester Dry-Fogs

PPG Speedhide SUPER TECH MG Interior Epoxy Ester Dry-Fogs are premium high solids, low-odor coatingsdesigned with excellent adhesion for multiple substrates. This epoxy ester formula provides the greatest range ofversatility for older substrates where the surface may not becompletely clean or where surface preparation can bedifficult. These dry-fogs can be used on direct-to-metal interior,dry areas and as a single-coat finish on most surfaces.

PPG Speedhide SUPER TECH Epoxy Ester Dry-Fogs aredesigned for excellent hiding at a reduced film thickness,increasing your square footage per gallon of dry-fog. Theseepoxy ester dry-fogs are easy to apply, tolerate higher filmbuilds and will yellow less than conventional alkyd dry-fogs.

Why PPG Speedhide SUPER TECH Interior MG Epoxy Ester Dry-Fogs?• Excellent hide covers surface imperfections

• Dry falls at eight feet

• Versatility to adhere to multiple substrates

• Excellent adhesion to a variety of substrates eliminates flaking and peeling

• Tolerates overbuild, resists mud cracking

• Best choice for distressed substrates

• Light-reflecting white increases lighting efficiency

• One-coat coverage saves time and money

• Yellows less than conventional alkyds

Speedhide SUPER TECH Interior MG Epoxy Ester Dry-Fog CODE SHEEN PRODUCT NAME SIZES

6-157 Flat White and Pastel Base 5s6-159 Flat Black 5s6-158 Eggshell White and Pastel Base 5s

DRY-FOG SOLUTION

*Meets MPI #55Note: MPI listing as of April 1, 2010Visit http://www.paintinfo.com /mpi for an up-to-date listing

25.437"11"

Asset No. 78026

QC�______ ______ Client�_____ _____

Date ____/____/____ Proof No.�______

25 50 100 25 50 100

25

2

2 50 100 25

2

2 50 100

C M Y K 10-03-12_sh_dry_fog.qxp REMAY 78026TRIM: 25.4375" x 11.000" BLEED: 0.1250" Digital/IAM

FINISH: 8.5000" x 11.000"

PPG Speedhide Low-VOC Water-Based Dry-Fogs

PPG’s Speedhide Low-VOC Interior Water-Based Dry-Fogs are fast-drying, low-odor coatings ideal for new constructionwhere a low-VOC, low-odor coating is required to meet greenstandards, particularly if environmental standards are a factor.The high light-reflectance value of the white finish is ideal forwork areas requiring a bright environment. PPG’s water-baseddry-fogs are easy to use and provide easy soap and watercleanup of equipment. Moreover, water-based dry-fogs dryfaster than oils and don't have the strong scent that is familiarwith alkyd dry-fogs.

Low-VOC, water-based dry-fogs are also available in thepremium Speedhide SUPER TECH® line. Speedhide SUPERTECH Water-Based Dry-Fogs are self-priming and provideexcellent adhesion on a variety of substrates including the pre-primed decking where most other dry-fog coatings fail.Formulated with a flash rust resistor, these high-hiding productscover easily in one pass to provide time and money savings.Speedhide SUPER TECH WB Dry-Fog is also available in a flatneutral base allowing you to get to those darker, richer colors.

Why PPG Speedhide Interior WB Latex Dry-Fog? • Low-VOC, <50g/L VOC

• Excellent hide covers surface imperfections

• Dry falls at 10 feet

• One-coat hide means less time and money spent on application

• Excellent adhesion eliminates crawling on the surface

• Clean white finish will not yellow

• Light-reflecting white increases lighting efficiency and promotes a safer working environment

• Can help earn LEED credits contributing to sustainable design

• Speedhide SUPER TECH WB is self-priming allowing you toturn jobs faster saving on both material and labor costs

• Speedhide SUPER TECH WB adheres to pre-primed decking

• Available in a white and pastel base, neutral base and black

• Meets MPI #118, #133, #155 and #226

Speedhide Interior WB Latex Dry-Fog CODE SHEEN PRODUCT NAME SIZES

6-715XI* Flat White and Pastel Base 5s, 55s6-713XI Flat Black 5s6-714XI** Semi-Gloss White and Pastel Base 5s, 55s

Speedhide SUPER TECH Interior WB Latex Dry-FogCODE SHEEN PRODUCT NAME SIZES

6-725XI† Flat White and Pastel Base 5s, 55s6-723XI† Flat Black 5s6-726XI Flat Neutral Base 5s6-724XI Semi-Gloss White and Pastel Base 5s, 55s

Can help earn LEED NC 2.2 & 3.0 credits * Meets MPI #118 ** Meets MPI #155 & #226 † Meets MPI #133 Note: MPI listing as of April 1, 2010. Visit http://www.paintinfo.com/mpi for an up-to-date listing.

Go to www.ppgac.com/green for all the information youneed to make your next project green.SU

BSTR

ATES

Product Code 6-723XI 6-724XI 6-725XI 6-726XI 6-713XI 6-714XI 6-715XI 6-157 6-158 6-159 6-150XI 6-151XI 6-160XI 6-161XI UC87062

Availability 5s 5s, 55s 5s, 55s 5s 5s 5s, 55s 5s, 55s 5s 5s 5s 5s 5s 5s 5s, 55s 5s

Int/Ext Use Int Int Int Int Int Int Int Int Int Int Int Int Int Int Int

Color/Base Black White & Pastel White & Pastel Neutral Base Tints Black White & Pastel White & Pastel White & Pastel White & Pastel Black White White White White Black

Tintable* No Yes Yes Yes No Yes Yes Yes Yes No Yes Yes Yes Yes No

PPG Colorants N/A 96-line 96-line 896 N/A 96-line 96-line 96-line 96-line N/A 96-line 96-line 96-line 96-line N/A

Sheen Flat Semi-Gloss Flat Flat Flat Semi-Gloss Flat Flat Eggshell Flat Flat Eggshell Flat Semi-Gloss (Low-Lustre) Flat0 to 5 10 to 25 0 to 5 0 to 5 0 to 5 10 to 25 0 to 5 0 to 5 30 to 40 0 to 5 0 to 5 50 to 70 0 to 5 35 – 55 @ 85° 0 to 5

Resin Type Acrylic/PVA 100% Acrylic Acrylic/PVA Acrylic/PVA Vinyl Acrylic Acrylic Vinyl Acrylic Epoxy Ester Epoxy Ester Epoxy Ester Alkyd Alkyd Alkyd Alkyd Alkyd

VOC (g/L) 14 29 29 14 14 31 21 391 383 372 382 389 384 362 383

Can earn LEED credits ✔ ✔ ✔ ✔ ✔ ✔ ✔

MPI** 133 133 155 & 226 118 55 55

Coverage† (ft2/gal) 200 200 200 200 200 200 200 310 to 405 310 to 405 310 to 405 321 to 535 321 to 535 200 to 275 200 to 275 200 to 275

Application Temp Range 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F 50° to 100° F(air and surface) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C) (10° to 38° C)

Optimum Paint Temp 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 50° to 90° F 60° to 90° F 60° to 90° F 60° to 90° F 60° to 90° F 60° to 90° F(10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (10° to 32° C) (16° to 32° C) (16° to 32° C) (16° to 32° C) (16° to 32° C) (16° to 32° C) (16° to 32° C)

Light Reflectance N/A 87 85 N/A N/A 85 85 81 83 N/A 83.5 81.3 82.4 81.9 N/A

Dry Falls 10 ft 10 ft 10 ft 10 ft 10 ft 10 ft 10 ft 8 ft 8 ft 8 ft 10 ft 10 ft 10 ft 10 ft 10 ft

Adhesion Excellent Excellent Excellent Good Good Good Good Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent

Impact Resistance Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes(ASTM D4541)

Flexibility (ASTM D522) Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes Passes

Pencil Hardness 4B 4B 4B 4B 4B 4B 4B 2B 2B 2B F F B B B(ASTM D3363)

Flash Rust Resistance Excellent Excellent Excellent Excellent Good Good Good N/A N/A N/A N/A N/A N/A N/A N/A

Low Odor ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Dry Time (to recoat) 2 Hours 2 Hours 2 Hours 2 Hours 2 Hours 2 Hours 2 Hours 12 Hours 12 Hours 12 Hours 2 Hours 2 Hours 2 Hours 3 to 4 Hours 2 Hours

Cleanup Soap & Water Soap & Water Soap & Water Soap & Water Soap & Water Soap & Water Soap & Water Xylol Thinner Xylol Thinner Xylol Thinner Paint Thinner Paint Thinner Paint Thinner Paint Thinner Paint Thinner

Flash Point Over 200°F (93°C) Over 200°F (93°C) Over 200°F (93°C) Over 200°F (93°C) Over 200°F (93°C) Over 200°F (93°C) Over 200°F (93°C) Over 108°F (42°C) Over 108°F (42°C) Over 108°F (42°C) 107°F (41.7°C) 107°F (41.7°C) 90°F (32.2°C) Over 108°F (42°C) Over 90°F (32.2°C)

Pre-Primed Metal Decking ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Aluminum ✔‡ ✔‡ ✔‡ ✔‡ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Concrete/Masonry Block ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Concrete ✔‡ ✔‡ ✔‡ ✔‡ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Ferrous Metal ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Galvanized Steel ✔‡ ✔‡ ✔‡ ✔‡ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡

Gypsum Drywall ✔‡ ✔‡ ✔‡ ✔‡ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Plaster ✔‡ ✔‡ ✔‡ ✔‡ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

Wood ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔‡ ✔‡ ✔‡ ✔‡ ✔‡

FEAT

URES

AND

BEN

EFIT

S

SUPER TECH® Interior WB Dry-Fog Interior Dry-Fog Spray Paint SUPER TECH® Interior MG Dry-Fog SUPER TECH® Interior Dry-Fog Interior Dry-Fog

Flat Latex Semi-Gloss Latex Flat Latex Flat Latex Flat Latex Semi-Gloss Latex Flat Latex Flat Epoxy Ester Eggshell Flat Epoxy Ester Flat Alkyd Eggshell Alkyd Flat Alkyd Low Lustre Flat AlkydEpoxy Ester (Semi-Gloss) Alkyd

* Refer to the appropriate color formula book, automatic tinting equipment and/or computer color matching system for color formulas and tinting instructions. ** As of April 1, 2010. Visit http://www.paintinfo.com/mpi for an up-to-date listing. † Theoretical Coverage without loss calculation ‡ Self priming on substrate. See Technical Data Sheet for full details on surface preparation and application for each substrate.

8.500" 8.500" 8.4375"