2tmd042000d0007 08.07.2020 product manual abb-free@home · today · product manual2tmd042000d0007...

2TMD042000D0007 │ 08.07.2020

Product manualABB-free@home®

VIM-S-1.24.1 VRF interface module

Inhaltsverzeichnis

Product manual 2TMD042000D0007 │2

Inhaltsv erzeichnis

1 Notes on the instruction manual ............................................................................................................ 3

2 Safety .................................................................................................................................................. 3

3 Intended use ........................................................................................................................................ 4

4 Environment ......................................................................................................................................... 54.1 ABB devices .............................................................................................................................. 5

5 Product description ............................................................................................................................... 6

6 Technical data ...................................................................................................................................... 7

7 Mounting/Installation ............................................................................................................................. 87.1 Requirement for the electrician ................................................................................................... 87.2 Mounting ................................................................................................................................... 9

8 Commissioning ................................................................................................................................... 108.1 Setting the VRF interface modules ........................................................................................... 11

8.1.1 Adding the VRF indoor units.................................................................................................. 118.1.2 Renaming the VRF indoor units ............................................................................................. 128.1.3 Configuring VRF indoor units ................................................................................................ 148.1.4 Linking VRF indoor units with the scenes ............................................................................... 158.1.5 Setting binary input ............................................................................................................... 16

8.2 Creating a function on a ABB-free@homeTouch ....................................................................... 168.3 Failure and recovery of bus voltage .......................................................................................... 178.4 Firmware update ...................................................................................................................... 17

9 Operation ........................................................................................................................................... 18

Notice ........................................................................................................................................................ 19

Notes on the instruction manual


1 Notes on the instruction manual

Please read through this manual carefully and observe the information it contains. This willassist you in preventing injuries and damage to property, and ensure both reliable operation anda long service life for the device.

Please keep this manual in a safe place. If you pass the device on, also pass on this manualalong with it. ABB accepts no liability for any failure to observe the instructions in this manual.

2 Safety

WarningElectric voltage!Dangerous currents flow through the body when coming into direct or indirectcontact with live components.This can result in electric shock, burns or even death.– Disconnect the mains power supply prior to installation and/or disassembly!– Permit work on the 100-240 V supply system to be performed only by

specialist staff!

Intended use


3 Intended use

Abbreviation descriptionVRF = Variable refrigerant flow

Topology

Devices which are physically connected to the ABB-free@home® bus, log themselvesautomatically into the System Access Point.

Maintenance-free deviceThe device is maintenance-free. In case of damage, e.g. during transport or storage), do notperform repairs. Once the device is opened, the warranty is void.

Access to the device must be guaranteed for operation, testing, inspection, maintenance andrepairs (according to DIN VDE 0100-520).

CleaningClean dirty devices with a soft dry cloth. If this is insufficient, the cloth can be moistened slightlywith a soap solution.

When spraying on cleaning agents, these can enter the device through crevices. Do not spraycleaning agents directly onto the device.

Aggressive cleaning agents can damage the surface of the device. Never use caustic agents,abrasive agents or solvents.

SysAP

PC

Router

RS-485

VRF

free@homePower

3rd partyVRF

gateway

VRFair

conditioning

AB

Environment


4 Environment

Consider the protection of the environment!Used electric and electronic devices must not be disposed of with householdwaste.– The device contains valuable raw materials that can be recycled. Therefore,

dispose of the device at the appropriate collecting facility.

4.1 ABB devices

All packaging materials and devices from ABB bear the markings and test seals for properdisposal. Always dispose of the packing materials and electric devices and their components viaan authorized collection facility or disposal company.

ABB products meet the legal requirements, in particular the laws governing electronic andelectrical devices and the REACH ordinance.

(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description


5 Product description

No. Description

1 Binary input

2 Reserved

3 RS485 connector

4 Identification LED

5 Device identification during commissioning

6 BUS connection terminal

64.5

90

35.61 2 3

4

6

5

Technical data


6 Technical data

Rating voltage 30 V⎓Bus input voltage 21-30 V ⎓Rating current 30 V⎓, 7 mA

Maximum power 0.2 W

Single-wire clamps 0.2...4 mm2

Fine-wire clamps 0.2...2.5 mm2

Operating temperature -10 °C … +45 °C

Storage temperature -25 °C … +70 °C

IP level IP 20

Mounting/Installation


7 Mounting/Installation

WarningElectric voltage!Dangerous currents flow through the body when coming into direct or indirectcontact with live components.This can result in electric shock, burns or even death.– Disconnect the mains power supply prior to installation and/or disassembly!– Permit work on the 100-240 V supply system to be performed only by

specialist staff!

7.1 Requirement for the electrician

WarningElectric voltage!Install the device only if you have the necessary electrical engineeringknowledge and experience.– Incorrect installation endangers your life and that of the user of the electrical

system.– Incorrect installation can cause serious damage to property, e.g. due to fire.The minimum necessary expert knowledge and requirements for the installationare as follows:– Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect2. Secure against being re-connected3. Ensure there is no voltage4. Connect to earth and short-circuit5. Cover or barricade adjacent live parts.

– Use suitable personal protective clothing.– Use only suitable tools and measuring devices.– Check the type of supply network (TN system, IT system, TT system) to

secure the following power supply conditions (classic connection to ground,protective grounding, necessary additional measures, etc.).

Mounting/Installation


7.2 Mounting

The device must only be installed on mounting rails according to DIN EN 60715.

Commissioning


8 Commissioning

Commissioning is always carried out via the Web-based surface of the System Access Point.

The System Access Point establishes the connection between the free@home participants andthe smartphone, tablet or PC. It is used to identify and program the participants duringcommissioning.

Devices which are physically connected to the free@home bus, log themselves automaticallyinto the System Access Point. They transmit information about their type and supportedfunctions.

During initial commissioning all devices are given a generic name (e.g. switch ac-tuator 1, etc.).The user must change this name to a name practical for the system (Example: "Living roomlight" for an actuator in the living room.

The devices must be parameterised for the use of additional functions.

Commissioning of the VRF interface module is described in the following chapters. Here it isassumed that the basic commissioning steps of the overall system have already been carriedout. General knowledge about the Web-based commissioning software of the System AccessPoint is assumed.

NoteGeneral information about commissioning and parameterization is available inthe system manual and the online Help of the "System Access Point"(www.abb.com/freeathome).

Commissioning


8.1 Setting the VRF interface modules

8.1.1 Adding the VRF indoor units

On the configuration screen, click "Device configuration", followed by "VRF gateway", "VRFgateway", then max 48 VRF indoor units are displayed automatically in the sequence (1~48) onthe screen.

Commissioning


8.1.2 Renaming the VRF indoor units

If you have known the location of the indoor unit, you can rename it directly and select theposition from the drop-down list.

Commissioning


If you don’t know the real locaton of the indoor unit, you can click and find out thelocation when the status icon is changed.

Commissioning


8.1.3 Configuring VRF indoor units

On the floor screen, click exist VRF icon to enter the setting.

No. Description

1 Changing the name.

2 Deleting the channel.

3 Switching the VRF indoor unit on/off via the button.

4 Call-up or closing the control element of the VRF indoor unit via the arrow button.Please see the "Operation" chapter for more details.

Commissioning


8.1.4 Linking VRF indoor units with the scenes

VRF indoor units can be linked with the scenes. (It is recommended to link up to 5 scenes)

First click on the scene and then the VRF indoor unit, a blue connecting line indicates the linkbetween them.

You can click "∨" to do more settings. Please see the "Operation" chapter for more details.

Commissioning


8.1.5 Setting binary input

"Binary input" can be found at the bottom of VRF indoor unit list.

The "Binary input" can also be linked to a designated scene.

"Contact type" can be selected between "NO contact" and "NC contact".

8.2 Creating a function on a ABB-free@homeTouch

NoteThe settings are made via the panel configuration of the Web-based userinterface of the System Access Point.

Please see the product manual of the ABB-free@homeTouch for more details.

Commissioning


8.3 Failure and recovery of bus voltage

The VRF interface Gateway does not respond during a bus voltage failure. After the recovery ofthe bus voltage the status of the VRF interface Gateway remains unchanged. In exceptionalcases it can happen that the VRF interface Gateway is switched off at the recovery of the busvoltage.

8.4 Firmware update

The firmware update is carried out via the Web-based user interface of the System AccessPoint, see www.abb.com/freeathome.

Operation


9 Operation

Operation is carried out via the control element of the VRF interface in the Web-based userinterface of the System Access Point or in the free@home app.

No. Description

1 Switching the actuator on/off via the button.

2 Call-up or closing the control element of the actuator via the arrow button.

3 Selection of the operating mode, e.g. heating, cooling, ventilation, drying

4 Setting the setpoint temperature via the -/+ buttons. When the limit value of the specifiedmaximum/minimum setpoint temperature is reached, the -/+ characters are faded in or out.

5 Setting the fan speed level via the -/+ buttons. Three fan speed levels are supported.

Operation can also be carried out via a ABB-free@homeTouch. Please see the manula forABB-free@homeTouch for more details.

Notice


Notice

We reserve the right to at all times make technical changes as well as changes to the contentsof this document without prior notice.

The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts noresponsibility for possible errors or incompleteness in this document.

We reserve all rights to this document and the topics and illustrations contained therein. Thedocument and its contents, or excerpts thereof, must not be reproduced, transmitted or reusedby third parties without prior written consent by ABB.

Contact us NoticeWe reserve the right to at all timesmake technical changes as well aschanges to the contents of thisdocument without prior notice.The detailed specifications agreedupon apply for orders. ABB acceptsno responsibility for possible errorsor incompleteness in this document.

We reserve all rights to thisdocument and the topics andillustrations contained therein. Thedocument and its contents, orextracts thereof, must not bereproduced, transmitted or reusedby third parties without prior writtenconsent by ABB

Erro

r! U

se th

e H

ome

tab

to a

pply

#y_

Dec

kbla

tt_D

okum

entT

yp_N

T to

the

text

that

you

wan

t to

appe

ar h

ere.

Erro

r! U

se th

e H

ome

tab

to a

pply

#y_D

eckb

latt

_Sac

hnum

mer

-Dat

um_N

T to

the

text

that

you

wan

t to

appe

ar h

ere.

ABB (United Arab Emirates)Industries(L.L.C)P.O.Box 11070 Dubai-UAET : +971 4 3147 586F : +971 4 3401 541

ABB (Vietnam) Ltd.Km 9 National Highway 1A ,Hoang Liet, Hoang Mai, Hanoi,VietnamT : +84 4 3861 1010F : +84 4 3861 1009

ABB (Turkey) Eletrik San.ASABB Elektrik Sanayi AS. OrganizeSanayi Bolgesi 2 CaddeNo: 16 Y. Dudullu-IstanbulT : +90 216 528 2281F : +90 216 528 2945

ABB (KSA) Electrical IndustriesCo. Ltd.P.O.Box 325841, Riyadh 11371T : +966 1 1484 5600F : +966 1 1206 7609

ABB (Thailand) Ltd.161/1 SG Tower, 1st-4th Floor, SoiMahadlekluang 3, Rajdamri Road,Lumpini, Pathumwan Bangkok10330, ThailandT : +66 2 6651 000F : +66 2 6651 043

ABB (Russia) Ltd.Electrification Smart BuildingsNakhimovskiy prospekt 58117335, Russian Federation,MoscowT: +7 (495) 777-222-0F: +7 (495) 777-222-0

ABB (Korea) Ltd.Oksan Bldg, 10th Fl. 157-33Samsung-dong, Gangnam-gu,135-090, Seoul, KoreaT : +82 2 5283 177F : +82 2 5282 350

ABB Malaysia Sdn BhdBlock A, Level 2, Lot 608, JalanSS13/IK 47500 Subang JayaSelangorT : +60 3 5628 4888F : +60 3 5635 8200

ABB Global Marketing - LebanonDown Town, Beirut, ebanonT : +961 1983 724/5F : +961 1983 723

ABB (Hong Kong) Ltd.3 Dai Hei Street, Tai Po IndustrialEstate, Tai po, Hong KongT : +852 2 9293 912F : +852 2 9293 505

ABB (India) Ltd.Plot No.1, Sector-1B,I.I.E.SIDCUL,Haridwar-249403.IndiaT : +91 133 423 5447F : +91 133 423 5449

ABB Pte. Ltd.2 Ayer Rajah Crescent,Singapore 139935T: + 65 6 7765 711F: + 65 6 7780 222

ABB Australia Pty Ltd.601 Blackburn Road3168, Notting Hill, Victoria,AustraliaT : +61 3 8577 7139F : +61 3 9545 0415

www.abb.com

Approvals and Compliances

2tmd042000d0007 08.07.2020 product manual abb-free@home · today · product manual2tmd042000d0007...

Documents