Imenco AS Stoltenberggt. 1

P.O. Box 2143 N-5504 Haugesund

Tel. +47 52 86 41 00 Fax. +47 52 86 41 01

E-mail address: imenco@imenco.no

Homepage www.imenco.no

DEEPWATER GUIDEWIRE ANCHOR ROV operated anchor for efficient subsea connection of guidewires

Guide wire anchor main mea-surements shown on figure above.

IMENCO has supplied the SUBSEA industry with guide wire an-chors and guide posts since 1988. For increasing depths, Imenco can offer an anchor with capacity to 45 tons (100.000 Lbs) wire tension. The Imenco design has been specified for projects down to 2200 msw (6.600 feet) and wire dia 1-1/2” (38 mm). The anchor is designed to fit a standard 8-5/8” o.d. Guide Post or larger dia. Guide Post.

Main features: • Proven and patented design. • Simple installation and release by ROV. No special tools required • Fits standard API guidepost • Special receptacle required • Release and re-installation possible in same run • Shear-pin release with shear capacity up to 100 000 lbs. All shear-pin parts

are automatically retrieved after operation. • All stainless steel construction • Supplied with full documentation and instructions.

Data:

Anchor stab diameter 117 mm

Over all length 830 mm

Standard socket wire diameter 1-3/4” / 1-1/2”

Weight 65 kp

Available shear-pin capacity To 45 ton / 100 000 Lbs.