Featuring CNC & Conventional Machines

“Rock Solid Accelerated Marketing Strategies”

3006 Northside Drive, New Iberia, Louisiana 70563

INSPECTION: Wednesday, November 13, 9:00 A.M. – 4:00 P.M.

61 Lakeview Lane, Carrollton, AL 35447 / Ph: 205 373 1130 / Mike Stone, CAI, AARE, GPPA, Broker / Auctioneer / 12% Buyer’s Premium Applies

Licenced in AL 1446, GA 002910, TN 5856-Frm 4960, KY 2714, MO 89382, FL 050568488, TX 13964, MS 750-Frm 1070F, AR 2685, LA-2026, LA-AB-444

See it at: www.stoneauctioneers.com

Bayou Teche

74,000±Sq. Ft. Buildings on 6.35± Acres

12' TABLE 75-TON TABLE CAPACITY10,000-Lb.

Table Capacity

Hydrostatic Table

Thursday, November 14, at 10:30 A.M.

Large Capacity Machine & Fabrication Shop

ALL DIESEL

2 32 3

REAL ESTATE

VERTICAL BORING MILL

Real Estate Auctions at 12:00 Noon Call Mike Stone 662-574-0318 for Details

FARREL Manual Vertical Boring Mill, w/Newall C80 2-axis DRO, 144" 4-jaw hydrostatic table, 75-ton table cap., (2) titling rams, adjustable rail, 90" under rail, 150" swing, 72" ram stroke, .7–.45 RPM, .002–.317 feed rate, pendant control, factory installed flush mount, 100 HP DC drive at 440/3/60, S/N 67R5501, new 1967.

Bayou Teche

Cajun Sugar Co-Op

LOADED WITH CRANES

3006 Northside Drive, New Iberia, LA 70563

90" UNDER RAILFLUSH MOUNTED

FACTORY INSTALLED

12' Table 75-Ton Table Capacity

6.35± Acres, 74,000 ± Sq. Ft. Buildings, Large Executive Offices

2 32 3

HORIZONTAL BORING MILLS

GIDDINGS & LEWIS 70-H6-T CNC Horizontal Boring Mill, w/Mach Motion CNC control, S/N H15-10-01, 72" x 170.5" table, 156"-X x 108"-Y x 41"-Z x 36"-W, 6" spindle, 5.6–1,020 spindle speed, Cat 50 and NMTB quick change tool holders, .012–120"/min. feed rate, 80,000-lb. table cap., S/N 420-288-75, new 1975.

LUCAS Mdl. 40T CNC Horizontal Boring Mill, w/Mach Motion CNC control, S/N X15-10-01, 86" x 60" table, 72"-X x 72"-Y x 50"-W x 62"-Z, 6" spindle, Cat 50 and NMTB quick change tool holders, 40 HP, S/N 0166, new approx. 1979.

80,000-LB. TABLE CAPACITY

6" BAR

6" BAR

CNC Retrofitted

2014

CNC Retrofitted

2015

4 5

HORIZONTAL BORING MILL

JOHNFORD Mdl. SV48H CNC “Super Vertical” Machining Center, w/Fanuc Oi-MC control, 51" x 27.6" table, 48"-X, 28"-Y x 24.8"-Z, 3.94"–28.7" spindle nose to table, 60–6,000 RPM, 50 taper, 3,300-lb. table cap., tool changer, chip conveyor, coolant system, S/N VBD6120, new 5/2006.

JOHNFORD CNC Mdl. VMC l600HD “Super Vertical” Machining Center, w/Fanuc Series Oi-MC control, 27 .5" x 72" T-Slotted table, 63"-X, 33"-Y x 28"-Z travels, 5.9"–37.4" spindle nose to table, 80–8,000 RPM, 50 taper tooling, 10,000-lb. table capacity, 220 volt, 3-phase motor,, w/coolant thru spindle, chip conveyor, hydraulic cooling, 4th axis ready, S/N VCB6167, new 2006.

JOHNFORD Mdl. ST80CH CNC “Super Turning” Lathe, w/Fanuc Oi-TC control, 39.4" swing over bed, 31.5" over cross slide, 78.7" Z-axis, 12-position turret, 24" 4-jaw chuck, 6" spindle bore, 5.5" bar cap., programmable tailstock, chip conveyor, coolant system, S/N TCD6027, new 2006.

INSPECTION: Wednesday, November 13, 9:00 A.M. – 4:00 P.M.

CNC MACHINING & TURNING CENTERS

GIDDINGS & LEWIS T4

Manual Horizontal

Boring Mill, w/Newall DP700

3-axis DRO, 48" x 86" table,

w/outriggers, 84"-X x 60"-Y

x 66"-Z x 26"-W, 4" spindle, 10–1,300

spindle speed, .002–.025"/min.

feed rate, 20,000-lb. table

cap., 20 HP motor, pendant

control, S/N 150-751-65,

new 1965 (out of service).

4TH AXIS READY

4" BAR

4TH AXIS SOLD SEPARATELY

10,000-Lb.

Table Capacity

4 5

MONARCH Mdl. 2500 Engine Lathe, 40" swing x 156" center distance, 28" 4-jaw chuck, 4 11/16" spindle bore, taper attachment, steady rest, tailstock, spindle speeds to 720 RPM, 40 HP, S/N 40938, new 11/1955, (Salt Mine Surplus).

KINGSTON Mdl. 2690 Gap Bed Engine Lathe, 26" swing x 90" center distance, 20" 4-jaw chuck, 16" 3-jaw chuck, 4" spindle bore, taper attachment, (2) steady rests, 10 HP, Newall DP700 DRO, work light, S/N CH13088, 2013.

SUMMIT Gap Bed Engine Lathe, Mdl. 19X80, 19" swing x 80" centers, 12" 3-jaw chuck, 4 1/8" spindle bore, (2) steady rests, taper attachment, tailstock, 10 HP, S/N 8618.

LATHES – 7 TO BE SOLD

VERTICAL TURRET LATHES

KING 36" Vertical Turret Lathe,

36" 4-jaw table, 5-position turret,

42" swing, adjustable rail, w/turret and side

head, 41" under the rail, flush mount,

motor and pendant control, 30 HP main

drive motor, S/N M36-586,

new 1953.

KING 62" Vertical Turret Lathe, 62" 4-jaw table, 5-position turret, 76" total swing, adjustable rail, w/right hand turret and left hand ram, (2) Newall DP700 DRO’s on each ram, 60" under rail, flush mount, motor and pendant control, 50 HP main drive motor, S/N LOT 442-3309, new 1955.

76" SWING 42" SWING

GAP BED GAP BED

Salt Mine Surplus

6 76 7

SAWS

W. F. WELLS Vertical Tilt/Miter Frame Bandsaw, Mdl. VCO2535, 25" x 35" cap., 19-3" x 1.5" x .05" blade, 10 HP motor and controls, 460 volt, 3-phase, S/N A-1070-07824, new 1977.

PARTIAL VIEW OF ANGLE PLATES, ROTARY

TABLES & RISERS

WELDERS – 15 TO BE SOLD

Partial View of View of Welders, 15 to Be Sold.PACEMAKER Manipulator 6' x 8', S/N 98-912, w/sub arc welder and Lincoln power source.

PRESS BRAKE

LVD CNC Hydraulic Press Brake, Mdl. 45JS06, PPBL 40/20 cap., 45-ton x 6.56', 64.25" DBH, 4" stroke, w/Hurco backgage, S/N 15547, 1989.

IRONWORKER

BALEIGH Hydraulic Ironworker, Mdl. SW503, 50-ton cap., punching, shearing, knotching, 5-station, 6" throat, 3 HP, S/N 394655, 2009.

MILLING

KINGSTON Vertical Milling Machine, Mdl. KMT 5V, 10" x 50" table, PF at X, 5 HP, 40 taper spindle, power draw bar, power knee, Newall DP700 3-axis DRO, Mitutoyo quill kit w/encoder, S/N 13290, 2013.

WELDING POSITIONERS

Partial View of Welding Positioners.

TURNING ROLLS

(2) Turning Roll Sets, 16,000-lb. cap./set.

HEM Mdl H90A-1 Saw, 12.75" x 12.75" cap., auto. feed, 1" x 12'10" x .035 blade, 0–24" bar feed, 3 HP, S/N 1020208, 2008.

Publ ic Auction – Live Onsite

Live Onl ine

MITERING

AUTO. FEED

6 76 7

2005

QC EQUIPMENT

BRINELL Portable Hardness Tester,

w/KingScan III automatic Brinell

microscope system,

w/Dell Latitude 3440 Captup

operating system.

INFINATE ARM 2.0 Portable CMM, Mdl. 5136, S/N 5136-242 w/Dell precision laptop, M4400 operating system.

Partial View of QC Mics, Calipers.

FORKLIFTS

NISSAN PD155H Forklift, Mdl. VF05H7011, 15,500-lb. cap., diesel, all-terrain solid dual front tires, 197" lift, S/N VF05-300636, 5,494 hrs., 2006.HYUNDAI Forklift, Mdl. 50DA-7E, 11,000- lb. cap., diesel, all-terrain solid tires, side shift, 3-stage mast, fork adjust, S/N HHIHFV10LC0000125, 2,193 hrs., 2014.HELI H-2000 Forklift, Mdl. CRCD-30KU1, 6,000-lb. cap., diesel, all-terrain solid tires, 3-stage mast, S/N 01030D9265, 5,092 hrs., 2009.

ROLLING STOCK

FORD F-250 Super Duty Truck, ext. cab., diesel, 8,800 GVW, 80" x 86" flatbed, VIN 1FTNX20F7XEE07778, 366,245 miles, 1999.

8' x 16' Bumper Pull Trailer, 10,000-lb. cap., wood deck.

AIR COMPRESSORS

QUINCY Rotary Screw Type Air Compressor, Mdl. QGD-50, 50 HP, w/refrigerated air dryer, 2014

MISCELLANEOUS

Partial View of Rigging.Partial View of Metals.

Partial View of Welding Tables.

OFFICE EQUIPMENT

Thursday, November 14, at 10:30 A.M.INSPECTION: Wednesday, November 13, 9:00 A.M. – 4:00 P.M.

2014

CMM

ALL DIESEL ALL TERRAIN TIRES

QS-0021757

61 Lakeview Lane, Carrollton, AL 35447

Large Capacity Machine& Fabrication Shop New Iberia, Louisiana 70563

Thursday, November 14, at 10:30 A.M.

Get More Detailed Machine Specifications at www.stoneauctioneers.com

Short Notice

Publ ic Auction – Live Onsite Live Onl ine

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

Directions, Auction Terms & Conditions Available at www.stoneauctioneers.com

NOT PICTURED ROTARY & T-SLOTTED TABLESGIDDINGS & LEWIS Air Lift 60" x 72" T-Slotted Rotary Table, w/pneumatic table clamping, 360 deg. x 1/2 deg. Vernier scale, 90 deg. shot pin locking, weight cap. of approx. 30,000-lbs.

GIDDINGS & LEWIS Air Lift 60" x 72" T-Slotted Rotary Table, w/pneumatic table clamping, 360 deg. x 1/2 deg. Vernier scale, 90 deg. shot pin locking, weight cap. of approx. 30,000-lbs., S/N 29-9962.

DEVLIEG 26" x 26" Air Lift T-Slotted Rotary Table, w/360 deg. Vernier scale, table load cap. of approx. 4,000-lbs., shot pin at each 90 deg. position.

(1) Right Angle Box, T-slotted (2) sides, 38"W x 127"L x 28"H.

(2) Right Angle Box Tables (PR), T-Slotted, 34"W x 91 "L x 43"H.

WELDERSMILLER CP302 Welder, S/N MA050014V, 200/230/460 volt, 3-phase, w/Miller 22A feeder, S/N LG361529W.

LINCOLN S350 Power Ware Welder, S/N GB15579-1-2004, w/Miller 25M feeder, S/N U1130102906.

MILLER Dimension 452 Welder, S/N LH010094C, 200/230/460, 3-phase, w/Miller 22A feeder, S/N LH030151W.

MILLER Dimension 452 Welder, S/N LK021849C, 230/460/575 volt, 3-phase, w/Miller 22A feeder, S/N LK370813U.

LINCOLN 5350 Power Wise Welder, S/N U1120703852, w/Miller 25M power feeder.

MILLER Dimension 452 Welder, S/N LK021850C, 230/460/575 volt, 3-phase, w/Miller 22A feeder, S/N LK110471U.

MILLER Dimension 452 Welder, S/N LG110109C, 200/230/460 volt, 3-phase, w/Miller 22A feeder, S/N LG043401.

LINCOLN Idealarc DC-1000 Welder, S/N U1070513914.

LINCOLN NA-35 Spot Welding Arm (on Bridge), Mdl. MBP04343, 115/230 volt, 64" horizontal travel, 7' vertical travel, w/Pacemaster control.

MILLER Welder, 230/460 volt, 3-phase, S/N UK.

LINCOLN 5350 Powerwire Welder, S/N GB15579-1-2004, w/Miller 25M power feeder.

MILLER Dimension 452 Welder, 230/460/575 volt, 3-phase, S/N LJ450234C, w/Miller 22A feeder, S/N LK110469U.

MILLER Dimension 452 Welder, 230/460/575 volt, 3-phase, S/N LG320081C, w/Miller 22A feeder, S/N LH030150W.

LINCOLN LN-25 Pro Wire Feed, S/N LL1120503275.

LINCOLN Invertec V356 Pro Welder, S/N U112005567.

COBRAMATIC Pro Series Wire Feed, S/N UK.

MILLER Dimension 452 Welder, 200/230/460 volt, 3-phase, S/N LH010095C, w/Miller 22A wire feeder, S/N MA020149V.

WELDING POSITIONERS(2) PROFAX Mdl. WP-1000 Welding Positioners, w/20" 3-jaw chuck, 1,000-lb. cap., 110 volt, single-phase, S/N WO-10-2707, S/N WO-10-1921.

PROFAX Mdl. WP-250 Welding Positioner, w/20" 3-jaw Chuck, 250-lb. cap., 110 volt, single-phase, S/N WP-146.

CAYUGA Welding Positioner, 60" table, S/N 1-2758.

QCGAGEMAKER Shop Floor Mic Trac Gage Setting and Part Measurement Center, Mdl. MT-3000, w/ForceLok and CPU/DRO.

COUTH MC2000T Hand-Held Engraver, Mdl. T2, S/N 24495.

AIR COMPRESSORSMANCHESTER Air Tank, 400-gallon, 165 max. PSI.

(2) Reciprocating Air Compressors, 10 HP, 200-gallon tank.

QUINCY Reciprocating Air Compressor, 3 HP, 100-gallon tank.

QUINCY Reciprocating Air Compressor, 2 HP, 50-gallon tank.

Reciprocating Air Compressor, 15 HP, 125-gallon tank.

Air Holding Tank, 100-gallon.

MISCELLANEOUSTROYKE 4th Axis Rotary Table, Mdl. DL-20-B, 10" thru hole, 24.5" 3-jaw, S/N 6081-2.

CAROLINA H-Frame Press, 50-ton cap. frame, w/25-ton cap. cylinder, 27" wide, 20" stroke.

DEWALT Abrasive Chop Saw on 20" x 24" Table.

12" DEWALT Chop Saw, w/2' x 22' table.

Large Qty. Machine Tool Fixtures.

(6) Metal Work Tables, 4' x 8' x 5/16", w/6" vise.

Welding Table, 4" Thick x 102" diameter, w/1" lines for layout.

(4) Welding Tables, 4" thick x 63" diameter.

Welding Table, 4" thick x 68" diameter.

Welding Table, 103" x 122" x 1-3/4" top.

Welding Table, 101" x 120" x 2" top.

(2) 48" x 50" Welding Tables.

(2) Base Angel Plates, 32.5" x 48" x 24".

Cutting Torch Head.

Flame Head for Torch.

(21) Welding Screens.

Welding Consumables.

Rod Dryer Boxes.

(5) 90 Deg. Air Die Grinders.

(2) Air Chisels.

(5) 4" DEWALT 90 Deg. Grinders.

(5) 10" DEWALT 90 Deg. Grinders.

MILWAUKEE 8" Radial Saw.

DEWALT Jig Saw.

DEWALT 1/2" Hand Drill.

30" IRWIN Slide Clamp.

(3) 10-Lb. Sledge Hammers.

48" Level.

(4) C-Clamp Style Vise Grips.

(2) 8" C-Clamps.

(2) 6" C-Clamps.

(3) Misc. Metal Shop Steps.

(2) 1-1/2-Ton Come-a-Longs.

(3) 12" C-Clamps.

(42) Pipe Jacks, various sizes.

(9) Pallets of Misc. Welding Test Equipment.

(2) Rigging Racks, w/misc. nylon straps and clevis hooks.