306 - flexible_record... · web viewa category can be assigned to the type of process described,...
TRANSCRIPT
![Page 1: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/1.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
The following table gives a detailed description of the type of information prompted for by the data entry fields.
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
1. Service life Tab
2. Confidentiality
Display: Basic
3. Service life name Text (255 char.)
Display: Basic
The name of the service life entry is intended to briefly describe the nature and scope of the activities with articles or buildings into which the substance has been incorporated. The name would usually refer to a group of articles. It would potentially also indicate a kind of activity with it. This also includes mixtures in their dried or cured form (e.g. Dried printing ink in newspapers; dried coatings on various surfaces) and mixtures contained into article. If an exposure assessment has been carried out, the use name forms the 'Exposure scenario name' in the relevant section where a link is made to this field 'Use name'.
4. Further description of use
Text (rich-text area)
Display: Basic
The service life name usually refers to a group of articles covered under this use. The current field enables a more detailed description of the range of articles covered. This may include examples of specific representative articles and a description of boundaries which articles are not covered. The description may also make reference to the categories to be assigned in Exposure related description of article or Article category (AC).
5. Regulatory status
List multi. (multi-select list)
Display: Basic
Picklist values:- use in Scientific Research and Development - [EU REACH]- use in plant protection products - [EU REACH]- use in biocidal products - [EU REACH]- use as motor fuels - [EU REACH]- use as fuel in mobile or fixed combustion plants
This field allows for flagging that the described use is subject to one or more particular regulations if applicable. This information can be useful for deciding on legislation-specific requirements (e.g. uses exempted from assessment).
Page 1 of 105
![Page 2: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/2.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
of mineral oil products and use as fuels in closed systems - [EU REACH]- use in cosmetics products - [EU REACH]- use in food contact materials - [EU REACH]- use of the substance in mixtures below the concentration limit specified in REACH Art. 56(6) - [EU REACH]- other:
Note that legislation-specific items are indicated by an informal text shown with the respective picklist items (e.g. EU REACH).
6. Explanation for the regulatory status
Text (32,768 char.)
Display: Basic
A justification can be entered for the claim of the specific regulatory status of the use, e.g. by providing the reference to the relevant legislation and the details related to the specific regulatory status and demonstrating that the criteria for a certain exemption are fulfilled.
Guidance for field condition:Condition: Field active only if Regulatory status' is not empty
7. Article used by List multi. (multi-select list)
Display: Basic
Picklist values:- workers- consumers
Indicate whether the article is used by workers or by consumers (general public).
8. Article category (AC)
List multi. (multi-select list)
Display: Basic
Picklist values:- AC 1: Vehicles- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive- AC1b: Other vehicles- AC 2: Machinery, mechanical appliances, electrical/electronic articles- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive- AC2b: Other machinery, mechanical appliances, electrical/electronic articles- AC 3: Electrical batteries and accumulators- AC 4: Stone, plaster, cement, glass and ceramic articles- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food
Select the article category that best fits to the field 'Further description of article'. This descriptor indicates the type of article into which the substance has eventually been processed.
Guidance for field condition:Condition: Field active only if article used by” is “workers”
Page 2 of 105
![Page 3: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/3.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
packaging)- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings- AC4f: Stone, plaster, cement, glass and ceramic articles: Articles with intense direct dermal contact during normal use- AC4g: Other articles made of stone, plaster, cement, glass or ceramic- AC 5: Fabrics, textiles and apparel- AC5a: Fabrics, textiles and apparel: Large surface area articles- AC5b: Fabrics, textiles and apparel: Toys intended for children's use (and child dedicated articles)- AC5c: Fabrics, textiles and apparel: Packaging (excluding food packaging)- AC5d: Fabrics, textiles and apparel: Articles intended for food contact- AC5e: Fabrics, textiles and apparel: Furniture & furnishings, including furniture coverings- AC5f: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use- AC5g: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use: bedding and mattresses- AC5h: Other articles made of fabrics, textiles and apparel- AC 6: Leather articles- AC6a: Leather articles: Large surface area articles- AC6b: Leather articles: Toys intended for children's use (and child dedicated articles)- AC6c: Leather articles: Packaging (excluding food packaging)- AC6d: Leather articles: Articles intended for food contact- AC6e: Leather articles: Furniture & furnishings, including furniture coverings- AC6f: Leather articles: Articles with intense direct dermal contact during normal use
Page 3 of 105
![Page 4: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/4.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- AC6g: Other leather articles- AC 7: Metal articles- AC7a: Metal articles: Large surface area articles- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)- AC7c: Metal articles: Packaging (excluding food packaging)- AC7d: Metal articles: Articles intended for food contact- AC7e: Metal articles: Furniture & furnishings- AC7f: Metal articles: Articles with intense direct dermal contact during normal use- AC7g: Other metal articles- AC 8: Paper articles- AC8a: Paper articles: Large surface area articles- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)- AC8c: Paper articles: Packaging (excluding food packaging)- AC8d: Paper articles: Articles intended for food contact- AC8e: Paper articles: Furniture & furnishings- AC8f1: Paper articles: Articles with intense direct dermal contact during normal use: personal hygiene articles- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use- AC8g: Other paper articles- AC 10: Rubber articles- AC10a: Rubber articles: Large surface area articles- AC10b: Rubber articles: Toys intended for children's use (and child dedicated articles)- AC10c: Rubber articles: Packaging (excluding food packaging)- AC10d: Rubber articles: Articles intended for food contact- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings- AC10f: Rubber articles: Articles with intense
Page 4 of 105
![Page 5: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/5.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
direct dermal contact during normal use- AC10g: Other rubber articles- AC 11: Wood articles- AC11a: Wood articles: Large surface area articles- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)- AC11c: Wood articles: Packaging (excluding food packaging)- AC11d: Wood articles: Articles intended for food contact- AC11e: Wood articles: Furniture & furnishings- AC11f: Wood articles: Articles with intense direct dermal contact during normal use- AC11g: Other wood articles- AC 13: Plastic articles- AC13a: Plastic articles: Large surface area articles- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)- AC13c: Plastic articles: Packaging (excluding food packaging)- AC13d: Plastic articles: Articles intended for food contact- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use- AC13g: Other plastic articles- AC 02: Other (intended to be released):- AC 0: Other:
9. Contributing activity / technique for the environment
Block of fields (repeatable) Start
10. Name of activity / technique
Text (2,000 char.)
Display: Basic
Enter a name here for an activity contributing to the consumer use. If no specific characteristic is to be highlighted from the environmental perspective the use name can be repeated here. If an exposure assessment has been carried out, the name of the contributing activity / technique
Page 5 of 105
![Page 6: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/6.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
corresponds to the title of the contributing scenario in the relevant section.
11. Environmental release category (ERC)
List multi. (multi-select list)
Display: Basic
Picklist values:- ERC10a: Widespread use of articles with low release (outdoor)- ERC10b: Widespread use of articles with high or intended release (outdoor)- ERC11a: Widespread use of articles with low release (indoor)- ERC11b: Widespread use of articles with high or intended release (indoor)- ERC12a: Processing of articles at industrial sites with low release- ERC12b: Processing of articles at industrial sites with high release- ERC12c: Use of articles at industrial sites with low release
A category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that different category systems may apply in the relevant regulatory framework as indicated by an informal text shown with the respective picklist items (e.g. EU REACH, US EPA). Consult the relevant legislation-specific guidance on what kind of information is expected.
12. Contributing activity / technique for the environment
Block of fields (repeatable) End
13. Contributing activity / technique for consumers
Block of fields (repeatable) Start
Guidance for field condition:Condition: Block of field active only if 'Article used by' is 'consumers'
14. Name of activity / technique
Text (2,000 char.)
Display: Basic
Enter a name here for the contributing activity by consumers. Usually the activity of a consumer is best named by a specific article type, as the article inherently determines the foreseeable activities with it. If an exposure assessment has been carried out, the name of the contributing activity corresponds to the title of the contributing scenario in the relevant section.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.GeneralInformation.ContributingScenarioName
15. Article category (AC)
List multi. (multi-select list)
Picklist values:- AC 1: Vehicles- AC1a: Vehicles covered by End of Life Vehicles
Select the article category that best fits to the field 'Further description of article'. This descriptor indicates the type of article into which the
Guidance for data migration:One repeatable set
Page 6 of 105
![Page 7: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/7.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Display: Basic (ELV) directive- AC1b: Other vehicles- AC 2: Machinery, mechanical appliances, electrical/electronic articles- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive- AC2b: Other machinery, mechanical appliances, electrical/electronic articles- AC 3: Electrical batteries and accumulators- AC 4: Stone, plaster, cement, glass and ceramic articles- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings- AC4f: Stone, plaster, cement, glass and ceramic articles: Articles with intense direct dermal contact during normal use- AC4g: Other articles made of stone, plaster, cement, glass or ceramic- AC 5: Fabrics, textiles and apparel- AC5a: Fabrics, textiles and apparel: Large surface area articles- AC5b: Fabrics, textiles and apparel: Toys intended for children's use (and child dedicated articles)- AC5c: Fabrics, textiles and apparel: Packaging (excluding food packaging)- AC5d: Fabrics, textiles and apparel: Articles intended for food contact- AC5e: Fabrics, textiles and apparel: Furniture & furnishings, including furniture coverings- AC5f: Fabrics, textiles and apparel: Articles
substance has eventually been processed. created for each value from:FLEXIBLE_RECORD.ArticleServiceLife.ArticleCategoriesFLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.GeneralInformation.ArticleCategory
Page 7 of 105
![Page 8: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/8.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
with intense direct dermal contact during normal use- AC5g: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use: bedding and mattresses- AC5h: Other articles made of fabrics, textiles and apparel- AC 6: Leather articles- AC6a: Leather articles: Large surface area articles- AC6b: Leather articles: Toys intended for children's use (and child dedicated articles)- AC6c: Leather articles: Packaging (excluding food packaging)- AC6d: Leather articles: Articles intended for food contact- AC6e: Leather articles: Furniture & furnishings, including furniture coverings- AC6f: Leather articles: Articles with intense direct dermal contact during normal use- AC6g: Other leather articles- AC 7: Metal articles- AC7a: Metal articles: Large surface area articles- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)- AC7c: Metal articles: Packaging (excluding food packaging)- AC7d: Metal articles: Articles intended for food contact- AC7e: Metal articles: Furniture & furnishings- AC7f: Metal articles: Articles with intense direct dermal contact during normal use- AC7g: Other metal articles- AC 8: Paper articles- AC8a: Paper articles: Large surface area articles- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)- AC8c: Paper articles: Packaging (excluding food packaging)- AC8d: Paper articles: Articles intended for food contact- AC8e: Paper articles: Furniture & furnishings
Page 8 of 105
![Page 9: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/9.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- AC8f1: Paper articles: Articles with intense direct dermal contact during normal use: personal hygiene articles- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use- AC8g: Other paper articles- AC 10: Rubber articles- AC10a: Rubber articles: Large surface area articles- AC10b: Rubber articles: Toys intended for children's use (and child dedicated articles)- AC10c: Rubber articles: Packaging (excluding food packaging)- AC10d: Rubber articles: Articles intended for food contact- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings- AC10f: Rubber articles: Articles with intense direct dermal contact during normal use- AC10g: Other rubber articles- AC 11: Wood articles- AC11a: Wood articles: Large surface area articles- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)- AC11c: Wood articles: Packaging (excluding food packaging)- AC11d: Wood articles: Articles intended for food contact- AC11e: Wood articles: Furniture & furnishings- AC11f: Wood articles: Articles with intense direct dermal contact during normal use- AC11g: Other wood articles- AC 13: Plastic articles- AC13a: Plastic articles: Large surface area articles- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)- AC13c: Plastic articles: Packaging (excluding food packaging)- AC13d: Plastic articles: Articles intended for food contact
Page 9 of 105
![Page 10: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/10.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use- AC13g: Other plastic articles- AC 02: Other (intended to be released):- AC 0: Other:
16. Percentage (w/w) of substance in mixture /article (%)
Numeric (decimal)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ArticleServiceLife.TypicalConcentration
17. Details on the percentage of substance in mixture/article
Text (32,768 char.)
Display: Basic
18. Contributing activity / technique for consumers
Block of fields (repeatable) End
19. Contributing activity / technique for workers
Block of fields (repeatable) Start
Guidance for field condition:Condition: Block of field active only if 'Article used by' is 'workers'
20. Name of activity / technique
Text (2,000 char.)
Display: Basic
Enter a name here for an activity contributing to the use described. A use may consist of one or more contributing activities, processes, tasks or unit operations. From the occupational perspective the focus is on the single task or process type carried out by a worker, e.g. charging and discharging to/from reaction vessel. If an exposure assessment has been carried out, each contributing scenario is related to a specific contributing activity / technique.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.GeneralInformation.ContributingScenarioName
21. Process category List multi. (multi-select list)
Picklist values:- PROC 1: Use in closed process, no likelihood
A category can be assigned to each task or process described, providing a generic
Guidance for data migration:
Page 10 of 105
![Page 11: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/11.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
(PROC)Display: Basic
of exposure- PROC 2: Use in closed, continuous process with occasional controlled exposure- PROC 3: Use in closed batch process (synthesis or formulation)- PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises- PROC 5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact)- PROC 6: Calendering operations- PROC 7: Industrial spraying- PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities- PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities- PROC 9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing)- PROC 10: Roller application or brushing- PROC 11: Non industrial spraying- PROC 12: Use of blowing agents in manufacture of foam- PROC 13: Treatment of articles by dipping and pouring- PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation- PROC 15: Use as laboratory reagent- PROC 16: Using material as fuel sources, limited exposure to unburned product to be expected- PROC 17: Lubrication at high energy conditions and in partly open process- PROC 18: Greasing at high energy conditions- PROC 19: Hand-mixing with intimate contact and only PPE available.- PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems- PROC 21: Low energy manipulation of substances bound in materials and/or articles- PROC 22: Potentially closed processing
characterisation from the occupational perspective. Note that different category systems may apply in the relevant regulatory framework as indicated by an informal text shown with the respective picklist items (e.g. EU REACH, US EPA). Consult the relevant legislation-specific guidance on what kind of information is expected. If applicable, items from different category systems may be selected in parallel if they have similar meaning.
One repeatable set created for each value from:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.GeneralInformation.ProcessCategoryFLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.GeneralInformation.ProcessCategory
Page 11 of 105
![Page 12: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/12.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
operations with minerals/metals at elevated temperature. Industrial setting- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles- PROC 25: Other hot work operations with metals- PROC 26: Handling of solid inorganic substances at ambient temperature- PROC 27a: Production of metal powders (hot processes)- PROC 27b: Production of metal powders (wet processes)- PROC28: Manual maintenance (cleaning and repair) of machinery- PROC 0: Other:
22. Percentage (w/w) of substance in mixture /article (%)
Numeric (decimal)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ArticleServiceLife.TypicalConcentration
23. Details on the percentage of substance in mixture/article
Text (32,768 char.)
Display: Basic
24. Contributing activity / technique for workers
Block of fields (repeatable) End
25. Technical function of the substance during use
List multi. (multi-select list)
Display: Basic
Picklist values:- ablative- abrasive- absorbent- adhesion promotor- adsorbent- aerating and dearating agent- alloying element
Please select ‘No Technical function’ in case the substance has no particular technical function during this use.
Multiple selection is possible. If not listed, select 'other' and specify.
Guidance for data migration:One-to-one mapping with the following exceptions:8244 - v2.0 colouring agents, dyes --> 2795 - v1.0 dye8245 - v2.0 colouring
Page 12 of 105
![Page 13: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/13.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- antiadhesive- anticaking agent- anticondensation agent- antifreeze agent- antioxidant- antiredeposition agent- antiscaling agent- antistain agent- antistatic agent- antistreaking agent- barrier (sealant)- binder- biocide- bleaching agent- brightener- catalyst- chain transfer agent- chelating agent- cleaning agent- cloud-point depressant- coalescing agent- compatibilizer- conductive agent- corrosion inhibitor- crystal growth modifiers (nucleating agents)- deflocculant- defoamer- demulsifier- density modifier- deodoriser- diluent- dispersing agent- drier- durability agent- dust suppressant- dusting agent- dye- elasticiser- embalming agent- energy releasers (explosives, motive propellant)- etching agent- explosion inhibitor- fertilisers (soil amendments)- filler
agents, pigments --> 2999 - v1.0 pigment8252 - v2.0 fillers --> 2819 - v1.0 filler8280 - v2.0 solvents --> 3342 - v1.0 solvent8241 - v2.0 binding agents --> 1342 - v1.0 other: binding agents (resin or (pre)polymers in coatings and adhesives))8263 - v2.0 laboratory chemicals --> 1342 - v1.0 other: laboratory chemicals8267 - v2.0 pharmaceutical substance --> 1342 - v1.0 other: pharmaceutical substance8270 - v2.0 plant protection active substance --> 1342 - v1.0 other: plant protection active substance8274 - v2.0 process regulators, used in vulcanisation or polymerisation processes --> 1342 - v1.0 other: process regulators use in vulcanisation or polymerisation process8277 - v2.0 reprographic agents (Toners) --> 1342 - v1.0 other: reprographic agents (toners)
Page 13 of 105
![Page 14: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/14.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- film former- finishing agents- fire extinguishing agent- fixing agent (mordant)- flame retardant- flocculating agent- flotation agent- flow promoter- flux agent- foamant- food flavouring and nutrient- fragrance- freeze-thaw additive- friction agent- fuel- fuel additive- gelling modifier- hardener- heat stabiliser- heat transferring agent- humectant- hydraulic (functional) fluids- impregnation agent- incandescent agent- insulators- intermediate (precursor)- ion exchange agent- leaching agent- lubricating agent- luminescent agent- magnetic element- monomer- opacifier- oxidising agent- pH regulating agent- photochemical- pigment- plasticiser- plating agent- pressure transfer agent- process regulator- processing aid- propellants, non-motive (blowing agents)- reactive cleaning/removal agent
Page 14 of 105
![Page 15: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/15.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- reducing agent- refrigerant- resin (prepolymer)- semiconductor and photovoltaic agent- sizing agent- softener- solids separation (precipitating) agent- solubility enhancer- solvent- stabilising agent- surface modifier- tanning agent- surfactant- swelling agent- tackifier- terminator / blocker- thickener / thickening agent- tracer- UV stabiliser- vapour pressure modifier- vehicle (carrier)- viscosity modifier- waterproofing agent- x-ray absorber- other:- no technical function
26. Tonnage of substance for this use (tonnes/year)
Numeric range (decimal)
Display: Basic
Lower numeric field [xx]:- >- >=- ca.
Upper numeric field [xx]:- <- <=- ca.
Enter the tonnage per year for this use*). Provide further details in the next field to support the interpretation of the value provided here. (Consult the relevant legislation-specific guidance on what kind of information is expected). The tonnage value should be entered preferably as single value. If a range is provided, in context of safety assessment, the upper value may be considered as the relevant one depending on the regulatory framework. *) The term 'use' is applied in a generic manner, regardless of the life cycle stage it refers to. Depending on the regulatory framework more specific terms may be required.
Remarks:The field type Numeric range includes a generic help text which guides the user to enter a single value
27. Details on tonnage reported
Text (32,768 char.)
Additional information on the tonnage figure can be entered in field 'Details on tonnage reported', e.g. source of information and method for
Page 15 of 105
![Page 16: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/16.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Display: Basic generating this tonnage (e.g. market survey by sector), the calendar year, regional reference, historical data and information on sites. It may also important to indicate whether or not the tonnage relates to a total market volume for that use (across all manufacturers and importers).
28. Remarks Text (rich-text area)
Display: Basic
As necessary, give any further explanations if they cannot be provided in any of the more specific fields. This may include information on the source of the information.
Guidance for data migration:Exposure-related description on articles:FLEXIBLE_RECORD.ArticleServiceLife.ExposureDescriptions
29. Contributing scenario for the environment (related to workers activities)
Tab
30. Contributing scenario for the environment (related to workers activities)
Block of fields (repeatable) Start
31. Confidentiality
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.AdministrativeData.DataProtection
32. Linked contributing activity
Link to endpoint (single)
Display: Basic
33. Conditions of use for the
Header 1
Page 16 of 105
![Page 17: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/17.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
environment
34. Product (article) characteristic
Header 2
35. Block of fields (repeatable) Start
36. Product (article) characteristic
Text (32,768 char.)
Display: Basic
Describe the product or article characteristic that impact on the release to the environment.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ProductCharacteristics.ConditionsOfUse.ConditionsOfUse
37. Block of fields (repeatable) End
38. Amounts used, frequency and duration of use (or from service life)
Header 2
39. Daily use amount at a site (tonnes/day)
Numeric (decimal)
Display: Basic
Quantify the amount of substance used per day. This amount can refer to a use taking place at industrial site or to the use taking place in a municipality (by professionals).
This amount, together with the emission factor enables determining the release rate. Note that for closed processes with reservoirs and long residence time of the substance (e.g. baths to treat surfaces) the rele-vant release value per day may be driven by the event when exchanging the bath rather than the every-day losses. In such case the use amount to be reported may be different than the daily use amount. Please pro-
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.DailyUseTonnesPerDay>
Page 17 of 105
![Page 18: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/18.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
vide explanations in the field 'Details on daily use amount'.
The amount for the generic municipality may be calculated from the market tonnage for this use (see Life cycle section) by determining the fraction proportional to a certain number of inhabitants, assuming equal spatial and annual distribution.
40. Details on daily use amount
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on the daily amount. For example: use amount based on statistics of generic sites carrying such use or amount corresponding to the maximum daily amount that can be safely used under the other conditions reported.
41. Annual use amount at a site (tonnes/year)
Numeric (decimal)
Display: Basic
Quantify the amount of substance used per year at a site. Such an amount cannot be more than 365 times the daily use amount at the site.
42. Details on annual use amount
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on the annual amount.
43. Number of emission days (days/year)
Numeric (decimal)
Display: Basic
For industrial sites the emission can be equally distributed over the year, or the emission can be limited to a few days spread over the year or cumulated in a certain period of time (e.g. in case of production campaigns).
As a determinant of environmental exposure, the number of emissions may play a role in the following context:
• The number of emission days may be so small (and so spread over the year as an additional condition) that the ecosystem can recover after the short single emission event.
• The number of emission days can be used to
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.NumberOfEmissionDays>
Page 18 of 105
![Page 19: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/19.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
calculate the annual amount/release from the daily amount/release.
44. Details on number of emission days
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on the emission days.
45. Other conditions
Block of fields (repeatable) Start
46. Other conditions related to amounts, frequency and duration of use characteristic
Text (32,768 char.)
Display: Basic
Any other conditions of use impacting on exposure can be reported here.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.OtherConditionsOfUse.OtherConditionsOfUse>
47. Other conditions
Block of fields (repeatable) End
48. Technical and organisational conditions and measures
Header 2
49. Block of fields (repeatable) Start
50. Technologies to minimise emissions
Text (32,768 char.)
Display: Basic
Describe conditions of use that are meant to minimise residual emissions to the environment occurring from rigorously contained systems. 'Minimisation' means applying the best technical means available to achieve release close to zero.
Guidance for field condition:Only active if the check box 'Rigorously contained system with minimisation of release to the
Page 19 of 105
![Page 20: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/20.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
When describing such conditions refer to the sources of residual release (generated although rigorous containment is in place) and explain the minimisation measures to be taken regarding emission to air and water. Include residues from cleaning and maintenance operations if relevant.
environment' is selected.
51. Block of fields (repeatable) End
52. Other technical and organisational conditions
Block of fields (repeatable) Start
53. Technical and organisational conditions and measures not related to biological sewage treatment
Text (32,768 char.)
Display: Basic
Describe conditions of use controlling releases to the environment that are not related to biological sewage treatment plants, such as wet/dry scrubbing, exhaust air incineration, onsite waste water oxidation, onsite pre-treatment by precipitation. For each measure the affected release route should be indicated, and (if relevant) an assumed or required effectiveness may be reported for each. If the measure is effective for more than one route, report each route separately.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.ConditionsAndMeasures.ConditionsOfUse>
54. Effectiveness Block of fields (repeatable) Start
55. Effectiveness (%)
Numeric (decimal)
Display: Basic
Indicate the typical effectiveness of the measure for the selected route.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.ConditionsAndMeasures.Effective
Page 20 of 105
![Page 21: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/21.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ness>
56. Route affected List (picklist)
Display: Basic
Picklist values:- water- air
Select the route for which the effectiveness has been reported.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.ConditionsAndMeasures.RouteAffected>
57. Details on effectiveness
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on effectiveness.
58. Effectiveness Block of fields (repeatable) End
59. Other technical and organisational conditions
Block of fields (repeatable) End
60. Conditions and measures related to Biological Sewage Treatment Plant
Header 2
61. Biological Sewage Treatment Plant (STP)
List (picklist)
Display: Basic
Picklist values:- no- municipal biological STP- site specific biological STP- site specific and municipal biological STP
Select type of biological sewage treatment applied. If no biological sewage treatment is foreseen select 'no'. In case a biological STP for which the 'settings' are standard (not use specific) is foreseen, then select 'municipal biological STP'. In case a biological STP with specific settings is foreseen, then select 'site specific biological STP'. Some setting of the site
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ConditionsAndMeasuresRelatedTo
Page 21 of 105
![Page 22: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/22.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
specific STP can be provided in the Field 'Details on site specific biological sewage treatment' as well as in further structured fields such as the discharge rate and whether sludge is intended to be applied to agricultural soil.
SewageTreatmentPlant.STPMunicipal>
62. Details on site specific biological STP
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information regard-ing biological sewage treatment.
63. Discharge rate of the site specific biological STP (m³/day)
Numeric (decimal)
Display: Basic
Report the daily amount of waste-water treated and discharged into surface water from the site specific biological STP.
Guidance for field condition:Condition: Field only active if 'Biological Sewage Treatment Plant (STP)' contains any picklist item starting with 'Site-specific ...'
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ConditionsAndMeasuresRelatedToSewageTreatmentPlant.STPDischargeRate>
64. Details on discharge rate of the site specific biological STP
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information regard-ing discharge rate.
Guidance for field condition:Condition: Field only active if 'Biological Sewage Treatment Plant (STP)' contains any picklist item starting with 'Site-specific ...'
65. Application of site specific biological STP
List (picklist) Picklist values:- yes- no
Select whether or not the application of the site specific STP sludge on agricultural soil takes place, and thus has to be accounted for in the
Guidance for field condition:Condition: Field only
Page 22 of 105
![Page 23: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/23.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
sludge on agricultural soil
Display: Basic exposure estimation to soil. active if Biological Sewage Treatment Plant (STP) contains any picklist item 'Site-specific ...'
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ConditionsAndMeasuresRelatedToSewageTreatmentPlant.STPSludgeOnAgriculturalSoil>
66. Details on application of site-specific biological STP sludge
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information regard-ing application of the site-specific STP sludge.
Guidance for field condition:Condition: Field only active if Biological Sewage Treatment Plant (STP) contains any picklist item 'Site-specific ...'
67. Other conditions of use
Block of fields (repeatable) Start
68. Other conditions of use related to biological sewage treatment plant
Text (32,768 char.)
Display: Basic
Any other conditions of use impacting on environmental release can be reported here.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ConditionsAndMeasuresRelatedToSewageTreatmentPlant.ConditionsOfUse.OtherConditionsOfUse>
69. Other conditions of
Block of fields (repeatable)
Page 23 of 105
![Page 24: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/24.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
use End
70. Conditions and measures related to external treatment of waste (including article waste)
Header 2
71. Particular considerations on the waste treatment operations
List (picklist)
Display: Basic
Picklist values:- no- dedicated re-collection infrastructure required- biological treatment not appropriate- incineration not appropriate- prevent formation of hazardous break down products in thermal destruction- treatment under rigorous containment conditions required- other:
Select one of the specific considerations if appropriate. For example, particularly hazardous metals in batteries would require a dedicated re-collection system, or biological treatment would not be appropriate for persistent substances. If substance properNties and use pattern do not call for particular considerations for the waste life stage of the sub-stance, select 'no'. If other specific concerns for waste treatment are to be reported, select 'other' and explain in “Details on waste treatment” which particular measures regarding waste treatment are needed.
Note: Waste treatment includes operations aiming at recovery or disposal.
72. Details on waste treatment
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information regard-ing waste treatment.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.ConditionsAndMeasuresRelatedToTreatmentOfWaste.ConditionsOfUse.ConditionsOfUse>
73. Other conditions of use
Block of fields (repeatable) Start
Page 24 of 105
![Page 25: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/25.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
74. Other conditions of use related to waste treatment
Text (32,768 char.)
Display: Basic
Any other conditions of use impacting on environmental release can be reported here.
75. Other conditions of use
Block of fields (repeatable) End
76. Other conditions affecting environmental exposure
Header 2
77. Place of use List (picklist)
Display: Basic
Picklist values:- indoor- outdoor- indoor and outdoor
Select type of use condition.
Outdoor use implies that direct release to soil (e.g. loss of lubricants for machinery in agriculture and forestry) or water (e.g. construction work at bridges, releases from boat/ship surface) can take place. Also releases from articles may be increased due to outdoor weathering conditions.
78. Details on place of use
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information regarding indoor/outdoor use
79. Receiving surface water flow rate (m³/day)
Numeric (decimal)
Display: Basic
Report receiving water flow rate assumed to be available for diluting the local release to water. For site specific data sets this can be the river flow rate at a specific location. For the generic assessment a river flow rate, consistent with the other assumptions (e.g. number of inhabitants in the generic municipality and discharge rate of the STP), is to be assumed.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.OtherConditionsAffectingEnvironmentalExposure.ReceivingSurfaceWaterFlowRate>
80. Details on surface water
Text (32,768 char.)
Add explanation as needed for interpretation of
Page 25 of 105
![Page 26: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/26.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
flow rateDisplay: Basic
the information regarding surface water flow rate.
81. Other conditions of use
Block of fields (repeatable) Start
82. Other conditions of use impacting on environmental exposure
Text (32,768 char.)
Display: Basic
Any other conditions of use impacting on environmental exposure can be reported here.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ConditionsOfUse.OtherConditionsAffectingEnvironmentalExposure.ConditionsOfUse.OtherConditionsOfUse>
83. Other conditions of use
Block of fields (repeatable) End
84. Releases to waste and the environment
Header 1
85. Block of fields (repeatable) Start
86. Release to the environment
Header 2
87. Block of fields (repeatable) Start
88. Release from the site to:
List (picklist)
Display: Basic
Picklist values:- wastewater- surface water- ambient air- non-agricultural soil
Select the route to which the release is reported in this block of fields. The releases reported should correspond to releases from the site, i.e. before potential treatment in a (standard)
Page 26 of 105
![Page 27: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/27.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- agricultural soil- underground
'Municipal biological sewage treatment plant'.
89. Release estimation method
List sup. (picklist with remarks)
Display: Basic
Picklist values:- ERC- SpERC- measured release rate- estimated release factor
The release to the environment can be estimated by different release estimation models or based on measured releases. Select the method used for estimating the release used in the risk assessment.
Provide explanations in the field 'Details on release estimates'. For example explain the source of the information (e.g. referring to an OECD Emission Scenario Document when Estimated release factor is the method selected).
Guidance for data migration:MR6216----------Depending on the value migrated to the field 'Release from site to', migrate the relevant value:- For water: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToWater.EstimationMethodName- For air:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToAir.EstimationMethodName- For soil:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToSoil.EstimationMethodName
MR6004----------The content of the fields <ReleasesToTheEnvironment.ReleaseToWater.EstimationMethodName> should be migrated to the Remarks of this field.
Page 27 of 105
![Page 28: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/28.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
When there is no value to migrate to the field 'Release estimation method' from the field 'Release factor Estimation Method' but a 'Release estimation name' is provided, please use the entry 'migration'.
90. Release factor from the site after on-site risk management (%)
Numeric (decimal)
Display: Basic
This is the release factor corresponding to the overall release factor from the site, after all on-site risk management measures have been applied.
Guidance for data migration:Depending on the value migrated to the field 'Release from the site to:', migrate the relevant value:- For water:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToWater.FactorAfterOnSiteRiskManagement- For air:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToAir.FactorAfterOnSiteRiskManagement- For soil:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToSoil.FactorAfterOnSiteRiskManagem
Page 28 of 105
![Page 29: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/29.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ent
91. Local release rate from the site (kg/day)
Numeric (decimal)
Display: Basic
The release rate is expressed in kg/day and corresponds to the amount of substance released over the day. When a release factor is provided the release rate is equal to the release factor multiplied by the daily tonnage.
Guidance for data migration:Depending on the value migrated to the field 'Release from the site to:', migrate the relevant value.- For water:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToWater.LocalReleaseRate- For air:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToAir.LocalReleaseRate
92. Details on release estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
Details on release estimates can be entered in this field as free text both for modelled estimates or monitoring.
For monitoring information a freetext template can be uploaded and edited as an option. As appropriate delete/add elements.
93. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Describe the reliability of the release estimate by selecting the appropri-ate reliability score. The 'other:' option may be selected if a different scoring system is used.
Consult the relevant legislation -specific guidance
Guidance for field condition:Condition: Field only active if the item 'measured release rate' has been selected in field
Page 29 of 105
![Page 30: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/30.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
on how to use this field. 'Release estimation method'
94. Details on reliability score
Text (32,768 char.)
Display: Basic
Provide an explanation of the reason why this score was selected.
Guidance for field condition:Condition: Field only active if the item 'measured release rate' has been selected in field 'Release estimation method'
95. Block of fields (repeatable) End
96. Block of fields (repeatable) End
97. Release to external waste
Header 2
98. Release factor to external waste (%)
Numeric (decimal)
Display: Basic
The release to external waste is the sum of
• the fraction released from the process itself (including the fraction left in a packaging when relevant) as far as not treated on site and
• the fraction moved to external waste by the on-site risk management measures (applied to waste water or exhaust air).
It refers to the submission substance.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ReleasesToTheEnvironment.ReleaseToWaste.ReleaseFactorToExternalWaste
99. Details on release to external waste
Text (32,768 char.)
Display: Basic
100. Exposure of the environment
Header 1
Page 30 of 105
![Page 31: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/31.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
101. Block of fields (repeatable) Start
102. Predicted exposure concentration
Block of fields (repeatable) Start
103. Exposed compartment
List (picklist)
Display: Basic
Picklist values:- freshwater- sediment (freshwater)- marine water- sediment (marine water)- predators' prey (freshwater)- predators' prey (marine water)- top predators' prey (marine water)- sewage treatment plant- air- agricultural soil- non-agricultural soil- predators' prey (terrestrial)- vegetation- other:
Select the compartment for which exposure is reported in this block of fields.
Note: Only the exposure information that is to be used in the risk as-sessment should be reported.
104. Predicted exposure concentration
Numeric (decimal including unit)
Display: Basic
Unit [xx]:- ng/L- µg/L- mg/L- g/L- ng/kg ww- µg/kg ww- mg/kg ww- g/kg ww- ng/kg dw- µg/kg dw- mg/kg dw- g/kg dw- ng/m³- µg/m³- mg/m³
Report the exposure concentration which is to be used for characterising the risks.
In field 'Details on exposure estimates', additional information can be given, e.g. measured data or case-specific modifications of modelled predictions. This may also include information on bioavailability.
Guidance for field condition:Conditional picklist depending on compartment selected can be implemented
Guidance for data migration:MR6217----------Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
phrase '1920 - v1.0: freshwater' FLEXIBLE_RECORD.ExposureScenarios.Contributi
Page 31 of 105
![Page 32: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/32.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ngScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FreshwaterPelagic.PEC
phrase '61757 - v1.0: sediment (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FreshwaterSediment.PEC
select phrase '8320 - v1.0: marine water' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineWaterPelagic.PEC
select phrase '61758 - v1.0: sediment (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineSediment.PEC
phrase '61759 - v1.0: predators' prey (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario
Page 32 of 105
![Page 33: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/33.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
.ExposureAndRiskForTheEnvironment.FoodchainFreshwater.PEC
phrase '61760 - v1.0: predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodchain.PEC
phrase '61761 - v1.0: top predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodchainTop.PEC
phrase '61762 - v1.0: sewage treatment plant' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.SewageTreatmentPlantEffluent.PECCLocal
phrase '61752 - v1.0: agricultural soil' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForThe
Page 33 of 105
![Page 34: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/34.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Environment.AgriculturalSoil.PEC
select phrase '61764 - v1.0: predators' prey (terrestrial)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.TerrestrialFoodchain.PEC
phrase '1712 - v1.0: air' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.Air.PEC
MR6011----------2154 - v1.0 ng/kg sediment dw 61769 - v1.02499 - v1.0 µg/kg sediment dw 61770 - v1.02093 - v1.0 mg/kg sediment dw 2089 - v1.18600 - v1.0 ng/kg 61766 - v1.08601 - v1.0 µg/kg 61767 - v1.08602 - v1.0 mg/kg 2097 - v1.18603 - v1.0 g/kg 61768 - v1.08089 - v1.0 ng/kg soil dw 61769 - v1.08088 - v1.0 µg/kg soil dw 61770 - v1.02096 - v1.0 mg/kg soil dw 2089 - v1.1
Page 34 of 105
![Page 35: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/35.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
3440 - v1.0 mg/m³ 58419 - v1.0
105. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- other:
The exposure to the environment can be estimated by different expo-sure estimation models or based on measured concentration in the environment. Select the method used.
Remarks:An option ‘Apply to all’ may be implemented in any software tool (as planned for IUCLID 6) which adopts the recording of the exposure esti-mation method / tool and measured data (if applicable) to all com-partments in one go. This auto-completion should not apply if the relevant fields have been populated manually. Any editing should also be possible for each compartment.
Guidance for data migration:Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
phrase '1920 - v1.0: freshwater' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FreshwaterPelagic.EstimationMethod
phrase '61757 - v1.0: sediment (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentW
Page 35 of 105
![Page 36: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/36.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
orker.ContributingScenario.ExposureAndRiskForTheEnvironment.FreshwaterSediment.EstimationMethod
select phrase '8320 - v1.0: marine water' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineWaterPelagic.EstimationMethod
select phrase '61758 - v1.0: sediment (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineSediment.EstimationMethod
phrase '61759 - v1.0: predators' prey (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FoodchainFreshwater.EstimationMethod
phrase '61760 - v1.0: predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentW
Page 36 of 105
![Page 37: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/37.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
orker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodchain.EstimationMethod
phrase '61761 - v1.0: top predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodchainTop.EstimationMethod
phrase '61762 - v1.0: sewage treatment plant' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.SewageTreatmentPlantEffluent.EstimationMethod
phrase '61752 - v1.0: agricultural soil' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.AgriculturalSoil.EstimationMethod
select phrase '61764 - v1.0: predators' prey (terrestrial)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario
Page 37 of 105
![Page 38: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/38.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
.ExposureAndRiskForTheEnvironment.TerrestrialFoodchain.EstimationMethod
phrase '1712 - v1.0: air' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.Air.EstimationMethod
106. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- EUSES- CHARM- ChemCAN- ChemSTEER- SCREEN3- AERSCREEN- AIR MOD- other:
Select which exposure estimation tool has been used.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
Guidance for data migration:Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
phrase '1920 - v1.0: freshwater' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FreshwaterPelagic.EstimationTool
phrase '61757 - v1.0: sediment (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForThe
Page 38 of 105
![Page 39: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/39.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Environment.FreshwaterSediment.EstimationTool
select phrase '8320 - v1.0: marine water' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineWaterPelagic.EstimationTool
select phrase '61758 - v1.0: sediment (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineSediment.EstimationTool
phrase '61759 - v1.0: predators' prey (freshwater)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.FoodchainFreshwater.EstimationTool
phrase '61760 - v1.0: predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodc
Page 39 of 105
![Page 40: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/40.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
hain.EstimationTool
phrase '61761 - v1.0: top predators' prey (marine water)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.MarineFoodchainTop.EstimationTool
phrase '61762 - v1.0: sewage treatment plant' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.SewageTreatmentPlantEffluent.EstimationTool
phrase '61752 - v1.0: agricultural soil' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.AgriculturalSoil.EstimationTool
select phrase '61764 - v1.0: predators' prey (terrestrial)' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.TerrestrialFoodchain.EstimationTool
Page 40 of 105
![Page 41: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/41.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '1712 - v1.0: air' FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.Air.EstimationTool
107. Version of exposure estimation tool
Text (255 char.)
Display: Basic
Provide the version number and additional details relating to the ver-sion (e.g. date or specific model or algorithm used in the case that several options are provided by the tool).
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
108. Number of measured data points
Numeric (decimal)
Display: Basic
Report the number of data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
109. Geometric standard deviation
Numeric (decimal)
Display: Basic
Report the geometric standard deviation calculated from the series of available measured data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
110. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTS
Details on exposure estimates can be entered in this field as free text both for modelled estimates or measured data. This may include details on bioavailability.
For monitoring information a free-text template can be uploaded and edited as an option. As appropriate delete/add elements.
Page 41 of 105
![Page 42: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/42.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
REMARKS
111. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Guidance for field condition:Condition: Field only active if the item 'measured release rate' has been selected in field 'Release estimation method'
112. Details on reliability score
Text (32,768 char.)
Display: Basic
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
113. Predicted exposure concentration
Block of fields (repeatable) End
114. Block of fields (repeatable) End
115. Attachment Attachment (multiple)
Display: Basic
Documents can be attached here, for example export files of exposure estimation tools.
116. Exposure of humans via the environment
Header 1
117. Block of fields (repeatable) Start
118. Daily intake via food consumption
Numeric (decimal including unit)
Unit [xx]:- ng/kg bw/day- µg/kg bw/day
Report the dose of substance to which man is exposed via food within a day. The related food items and populations are either i) determined by the modelling tool applied, or ii) can be further
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.Contribut
Page 42 of 105
![Page 43: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/43.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Display: Basic - mg/kg bw/day specified under 'Details on exposure estimates' if measured data are reported.
ingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.ManViaEnvironment.LocalExposureViaFoodConsumption.LocalTotalEstimatedDailyIntakeForHuman>
119. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- other:
The exposure to the environment can be estimated by different exposure estimation models or based on measured concentration in the environment. Select the method used.
Remarks:An option ‘Apply to all’ may be implemented in any software tool (as planned for IUCLID 6) which adopts the recording of the exposure estimation method / tool and measured data (if applicable) to all compartments in one go. This auto-completion should not apply if the relevant fields have been populated manually. Any editing should also be possible for each compartment.
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.ManViaEnvironment.LocalExposureViaFoodConsumption.ExposureAssessmentMethod>
120. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- EUSES- other:
Select which exposure estimation tool has been used.
Guidance for field condition:Condition: Field only active if 'Exposure
Page 43 of 105
![Page 44: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/44.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
estimation method' is 'Exposure estimation tool'
Guidance for data migration:<FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioEnvironmentWorker.ContributingScenario.ExposureAndRiskForTheEnvironment.ManViaEnvironment.LocalExposureViaFoodConsumption.ExposureTool>
121. Version of exposure estimation tool
Text (255 char.)
Display: Basic
Provide the version number and additional details relating to the version (e.g. date or specific model or algorithm used in the case that several options are provided by the tool).
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
122. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
Details on exposure estimates can be entered in this field as free text both for modelled estimates or measured data. This may include details on bioavailability. For monitoring information a free-text template can be uploaded and edited as an option. As appropriate delete/add elements.
123. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Describe the reliability of the release estimate by selecting the appropriate reliability score. The 'other:' option may be selected if a different scoring system is used. Consult the relevant legislation -specific guidance on how to use this field.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
Page 44 of 105
![Page 45: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/45.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
124. Details on reliability score
Text (32,768 char.)
Display: Basic
Provide an explanation of the reason why this score was selected.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
125. Block of fields (repeatable) End
126. Contributing scenario for the environment (related to workers activities)
Block of fields (repeatable) End
127. Contributing scenario for the workers
Tab Remarks:IT implementation issue: The section subsumed under this heading should only be active for workers uses, i.e. relation to manufacture, formulation, uses at industrial site, uses by professional workers or service life for workers.
128. Contributing scenario for the workers
Block of fields (repeatable) Start
129. Confidentiality
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.AdministrativeData.DataProtection
130. Linked contributing activity
Link to endpoint (single)
Guidance for data migration:Mapping between the use
Page 45 of 105
![Page 46: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/46.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Display: Basic descriptor of the contributing scenario from 6.0 <FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.GeneralInformation.ProcessCategory> and the use descriptor of the contributing activity in IUCLID 6.1 <ContributingActivityTechniqueForWorkers.ProcessCategoryPROC>
131. Conditions of use for workers
Header 1
132. Product (article) characteristics
Header 2
133. Percentage (w/w) of substance in mixture/article
Numeric (decimal)
Display: Basic
Indicate the concentration of the substance in the mixture to which the set of described use conditions refers to. If the substance is used as such, potentially 100% is to be entered.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.ProductArticleCharacteristics.SubstanceInMixture
134. Details on the percentage of substance in mixture/article
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the concen-tration value provided.
135. Physical form of the used product
List (picklist)
Display: Basic
Picklist values:- gas- liquefied gas- liquid- solid (unspecified form)- solid (very dusty form)
Select the physical form of the product as used. Note: This is not necessarily identical with the physical state/form of the substance as derived from manufacture. Also the form of the product used is not necessarily identical to the form to which the workers are exposed, as it may be
Page 46 of 105
![Page 47: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/47.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- solid (medium dusty form)- solid (non or low dusty form)
modified during use, for example a liquid may be sprayed and aerosols may be formed.
If the product is a solid, determine the level of dustiness by analogy:
• if all or significant fraction of substance occurs in form of fine light powders similar to flour, carbon black or chalk dust select 'very dusty'
• if all or significant fraction of substance occurs in form of granular solids similar to sugar or detergents select 'medium dusty'
• if substance largely occurs as pellets not breaking up or wax, select 'low dusty form'
136. Details on physical form
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the physical form information.
137. Other product (article) characteristics
Block of fields (repeatable) Start
138. Other product (article) characteristics
Text (32,768 char.)
Display: Basic
Other product characteristics impacting on exposure can be reported here. This may for example refer to viscosity of liquid product (to avoid splashes) or size of packaging (to limit amount per application).
For article, any characteristics of the article impacting on the release can be reported here such as description of the matrix.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.ProductArticleCharacteristics.OtherConditionsOfUse.OtherConditionsOfUse
139. Other product (article) characteristics
Block of fields (repeatable) End
140. Amounts used (or contained in
Header 2
Page 47 of 105
![Page 48: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/48.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
articles), frequency and duration of use/exposure
141. Duration of activity (hour/day)
Numeric (decimal)
Display: Basic
Indicate duration of worker’s activity for the set of conditions described. By default daily use (and hence long-term or re-peated dose exposure) is assumed. If the use however is limited to single short term events, the limited frequency can be reported under 'Other conditions related to amount, duration and frequency'.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.DurationOfActivity
142. Details on duration of activity
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the infor-mation on duration.
143. Other conditions
Block of fields (repeatable) Start
144. Other conditions related to amount, frequency and duration
Text (32,768 char.)
Display: Basic
Other conditions related to amount, duration or frequency impacting on exposure can be reported here. This may, for example refer to amount of substance present at the relevant workplaces, and to the duration and/or frequency of use.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.OtherConditionsOfUse.OtherConditionsOfUse
145. Other conditions
Block of fields (repeatable) End
146. Technical and organisational conditions and
Header 2
Page 48 of 105
![Page 49: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/49.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
measures
147. Block of fields (repeatable) Start
148. Technical means for rigorous containment and strict control for manual intervention
Text (32,768 char.)
Display: Basic
Describe how the technical equipment ensures rigorous containment. Address barriers for preventing inhalation and skin exposure. Describe the short and/or infrequent manual interventions (e.g. sampling) if any, and the corresponding measures for strict controls. Describe special technical proce-dures for cleaning and maintenance (e.g. purging).
Guidance for field condition:Condition: Only active if the check box 'Rigorously contained system with strict control for manual interventions' is selected
149. Block of fields (repeatable) End
150. Technical and organisational conditions
Block of fields (repeatable) Start
151. Technical and organisational conditions and measures
Text (32,768 char.)
Display: Basic
Describe the technical and organisational conditions (includ-ing measures determining the exposure at workplace), like for example suitable local exhaust ventilation of a certain effectiveness or long-handle tools preventing dermal exposure. An assumed or required effectiveness may be reported for each measure per route. If the measure is effective for more than one route, report each route separately.
Measures related to personal protective equipment should not be reported in this section.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.TechnicalAndOrganisationConditions.ConditionsOfUse
152. Effectiveness Block of fields (repeatable) Start
153. Effectiveness (%)
Numeric (decimal)
Indicate the typical effectiveness of the measure for the selected route.
Guidance for data migration:FLEXIBLE_RECORD.Exp
Page 49 of 105
![Page 50: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/50.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Display: Basic osureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.TechnicalAndOrganisationConditions.Effectiveness
154. Route affected List (picklist)
Display: Basic
Picklist values:- dermal- inhalation
Select the route for which the effectiveness has been reported.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.TechnicalAndOrganisationalConditionsAndMeasures.TechnicalAndOrganisationConditions.RouteAffected
155. Details on effectiveness
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on effectiveness.
156. Effectiveness Block of fields (repeatable) End
157. Technical and organisational conditions
Block of fields (repeatable) End
158. Conditions and measures related to personal protection, hygiene and health evaluation
Header 2
Page 50 of 105
![Page 51: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/51.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
159. Block of fields (repeatable) Start
160. Personal protection equipment
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.CondAndMeasRelatedToProtectionHygieneAndHealthEval.ConditionsAndMeasures.ConditionsOfUse
161. Effectiveness Block of fields (repeatable) Start
162. Effectiveness (%)
Numeric (decimal)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.CondAndMeasRelatedToProtectionHygieneAndHealthEval.ConditionsAndMeasures.Effectiveness
163. Route affected List (picklist)
Display: Basic
Picklist values:- dermal- inhalation
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.CondAndMeasRelatedToProtectionHygieneAndHealthEval.ConditionsAndMeasures.Route
Page 51 of 105
![Page 52: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/52.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Affected
164. Details on effectiveness
Text (32,768 char.)
Display: Basic
165. Effectiveness Block of fields (repeatable) End
166. Block of fields (repeatable) End
167. Other conditions affecting workers exposure
Header 2
168. Place of use List (picklist)
Display: Basic
Picklist values:- indoor- outdoor- indoor and outdoor
Indicate whether the set of reported conditions refers to outdoor or indoor ventilation conditions.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.OtherConditionsAffectingWorkersExposure.PlaceOfUse
169. Details on place of use
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the infor-mation on place of use.
170. Operating temperature (°C)
Numeric (decimal)
Display: Basic
Report the typical temperature at which the use takes place. The temperature may impact on exposure as it may change the vapour pressure or the physical state of the substance.
Page 52 of 105
![Page 53: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/53.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
171. Details on typical operating temperature
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the infor-mation on the process temperature.
172. Other conditions of use
Block of fields (repeatable) Start
173. Other conditions of use affecting workers exposure
Text (32,768 char.)
Display: Basic
Any other conditions of use impacting on exposure can be reported here.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ConditionsOfUse.OtherConditionsAffectingWorkersExposure.OtherConditionsOfUse.OtherConditionsOfUse
174. Other conditions of use
Block of fields (repeatable) End
175. Exposure of workers
Header 1
176. Block of fields (repeatable) Start
177. Exposure estimation
Block of fields (repeatable) Start
178. Type of exposure List (picklist)
Display: Basic
Picklist values:- inhalation (external) long-term exposure- inhalation (internal) long-term exposure- inhalation (external) short-term exposure- inhalation (internal) short-term exposure- dermal (external) long-term exposure- dermal (internal) long-term exposure- dermal (external) local concentration on skin
Select the type of exposure for which exposure is reported. This block of fields can be repeated.
Only the exposure information that is to be used in the risk assessment should be reported.
Please note that long-term exposure also covers repeated-dose exposure. Whether the systemic
Page 53 of 105
![Page 54: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/54.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- dermal (external) short-term exposure- dermal (internal) short-term exposure- oral (external) long-term intake- oral (internal) long-term intake- oral (external) short-term intake- oral (internal) short-term intake- concentration in tissue or body fluids
exposure estimate refers to external or internal exposure is determined by the tool/method used for predicting exposure. The corresponding information can be reported in the field 'Details on exposure estimates'. This may also include information on absorption (e.g. through the skin) and bioavailability.
The appropriate unit has to be selected. The unit for the systemic expo-sure via dermal route is expressed as daily dose per kg bw. This unit can be used for external exposure and internal exposure.
If the exposure estimate refers to concentration in body fluids (e.g. blood or urine) or tissue (e.g. hair), the corresponding item can be selected here.
179. Exposure estimate
Numeric (decimal including unit)
Display: Basic
Unit [xx]:- ng/m³- µg/m³- mg/m³- ng/kg bw/day- µg/kg bw/day- mg/kg bw/day- ng/cm²- µg/cm²- mg/cm²
Report the exposure value which is to be used for estimating the risks.
In field 'Details on exposure estimates', additional information can be given, e.g. case-specific modifications of modelled predictions.
Guidance for field condition:Conditional picklist depending on type of exposure selected can be implemented, see pre-selected units in IUCLID for exp.concentration
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicLongTe
Page 54 of 105
![Page 55: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/55.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
rm.Concentration
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicAcute.Concentration
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalLongTerm.Concentration
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalAcute.Concentration
'61781 - v1.0 dermal (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicLongTerm
Page 55 of 105
![Page 56: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/56.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
.Concentration
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicAcute.Concentration
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalLongTerm.Concentration
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalAcute.Concentration
180. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- negligible exposure- other:
The exposure of workers/consumers can be estimated by different expo-sure estimation models or based on measured data. If uses take place in rigorously contained systems an exposure close to zero (negligible) can also be demonstrated based on qualitative arguments. Select the method used for estimating the exposure.
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term
Page 56 of 105
![Page 57: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/57.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicLongTerm.EstimationMethod
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicAcute.EstimationMethod
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalLongTerm.EstimationMethod
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalAcute.EstimationMethod
'61781 - v1.0 dermal (internal) long-term
Page 57 of 105
![Page 58: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/58.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicLongTerm.EstimationMethod
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicAcute.EstimationMethod
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalLongTerm.EstimationMethod
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalAcute.EstimationMethod
Page 58 of 105
![Page 59: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/59.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
181. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- ART- ChemSTEER- ECETOC TRA workers- EMKG Expo tool- IH MOD- IH SkinPerm- MEASE- Riskofderm- Stoffenmanager- other:
Select the tool which has been used for estimating the exposure concentration
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicLongTerm.EstimationTool
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicAcute.EstimationTool
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.
Page 59 of 105
![Page 60: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/60.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
InhalationLocalLongTerm.EstimationTool
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalAcute.EstimationTool
'61781 - v1.0 dermal (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicLongTerm.EstimationTool
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicAcute.EstimationTool
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.
Page 60 of 105
![Page 61: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/61.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
DermalLocalLongTerm.EstimationTool
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalAcute.EstimationTool
182. Version of exposure estimation tool
Text (255 char.)
Display: Basic
183. Number of measured data points
Numeric (decimal)
Display: Basic
Report the number of data points that have been used to derive the exposure concentration.
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value. In addition the following conversion rule is used:
<5 = 15-20 = 520-50 = 20>50 = 50
'61807 - v1.0 inhalation (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicLongTerm.MeasuredDataPoints
'61783 - v1.0 inhalation
Page 61 of 105
![Page 62: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/62.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
(internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationSystemicAcute.MeasuredDataPoints
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalLongTerm.MeasuredDataPoints
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.InhalationLocalAcute.MeasuredDataPoints
'61781 - v1.0 dermal (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicLongTerm.MeasuredDataPoints
'61787 - v1.0 dermal
Page 62 of 105
![Page 63: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/63.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
(internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalSystemicAcute.MeasuredDataPoints
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalLongTerm.MeasuredDataPoints
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioWorker.ContributingScenarioWorker.ExposureAndRisksForWorkers.DermalLocalAcute.MeasuredDataPoints
184. Geometric standard deviation
Numeric (decimal)
Display: Basic
Report the geometric standard deviation calculated from the series of available measured data points that have been used to derive the exposure concentration.
185. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS
Page 63 of 105
![Page 64: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/64.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
186. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
187. Details on reliability score
Text (32,768 char.)
Display: Basic
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
188. Exposure estimation
Block of fields (repeatable) End
189. Block of fields (repeatable) End
190. Attachment (multiple)
Display: Basic
Documents can be attached here, for example export files of exposure estimation tools.
191. Contributing scenario for the workers
Block of fields (repeatable) End
192. Contributing scenario for the environment (related to consumer activities)
Tab Remarks:IT implementation issue: The section subsumed under this heading should only be active for consumers uses, i.e. when
Page 64 of 105
![Page 65: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/65.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
in relation to consumer use or service life for consumers.
193. Contributing scenario for the environment (related to consumer activities)
Block of fields (repeatable) Start
194. Confidentiality
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.AdministrativeData.DataProtection
195. Linked contributing activity
Link to endpoint (single)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.GeneralInformation.ArticleCategory
196. Conditions of use for the environment
Header 1
197. Product (article) characteristic
Header 2
198. Block of fields (repeatable) Start
199. Product (article) characteristic
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumer
Page 65 of 105
![Page 66: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/66.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
sActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.ProductArticleCharacteristic.ConditionsOfUse.ConditionsOfUse
200. Block of fields (repeatable) End
201. Amounts used, frequency and duration of use (or from service life)
Header 2
202. Daily use amount (tonnes/day)
Numeric (decimal)
Display: Basic
Quantify the amount of substance used per day. This amount should refer to a use taking place in a munici-pality (by general public).
The amount for the generic municipality may be calcu-lated from the market tonnage for this use (field 'Tonnage of substance for this use (tonnes/year)' in the related use record) by determining the fraction proportional to a certain number of inhabitants, assuming equal spatial and annual distribution.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.DailyUseTonnesPerDay
203. Details on daily use amount
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on the daily amount.
204. Annual use amount (tonnes/year)
Numeric (decimal)
Display: Basic
Quantify the amount of substance used per year. In principle this should be the daily amount multiplied by 365.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.
Page 66 of 105
![Page 67: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/67.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.AnnualUseTonnesPerYear
205. Details on annual use amount
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the information on the annual amount.
206. Number of emission days (days/year)
Numeric (decimal)
Display: Basic
Under the assumption of equal distribution in time this should be 365.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.NumberOfEmissionDays
207. Details on number of emission days
Text (32,768 char.)
Display: Basic
208. Other conditions
Block of fields (repeatable) Start
209. Other conditions related to amounts, frequency and duration
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.OtherConditions
Page 67 of 105
![Page 68: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/68.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
OfUse.OtherConditionsOfUse
210. Other conditions
Block of fields (repeatable) End
211. Conditions and measures related to external treatment of waste (including article waste)
Header 2
212. Block of fields (repeatable) Start
213. Conditions and measures related to external treatment of waste
Text (32,768 char.)
Display: Basic
The following type of information may be reported here: instructions regarding separation of waste to be communicated to consumers.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.ConditionsWasteTreatment.ConditionsOfUse.ConditionsOfUse
214. Block of fields (repeatable) End
215. Other conditions affecting environmental exposure
Header 2
Page 68 of 105
![Page 69: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/69.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
216. Block of fields (repeatable) Start
217. Other conditions of use impacting on environmental exposure
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ConditionsOfUse.OtherConditionsAffectingEnvironmentalExposure.OtherConditionsOfUse.OtherConditionsOfUse
218. Block of fields (repeatable) End
219. Releases to waste and the environment
Header 1
220. Block of fields (repeatable) Start
221. Release to the environment
Header 2
222. Block of fields (repeatable) Start
223. Release from the site to:
List (picklist)
Display: Basic
Picklist values:- wastewater- surface water- ambient air- non-agricultural soil- agricultural soil
Select the route to which the release is reported in this block of fields. The releases reported should correspond to releases from the site, i.e. before potential treatment in a (standard) 'Municipal biological sewage treatment plant'.
Page 69 of 105
![Page 70: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/70.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- underground
224. Release estimation method
List sup. (picklist with remarks)
Display: Basic
Picklist values:- ERC- SpERC- measured release rate- estimated release factor
The release to the environment can be estimated by different release estimation models or based on measured releases. Select the method used for estimating the release used in the risk assessment.
Provide explanations in the field 'Details on release estimates'. For example explain the source of the information (e.g. referring to an OECD Emission Scenario Document when Estimated release factor is the method selected).
Guidance for data migration:MR6216----------Depending on the value migrated to the field 'Release from site to', migrate the relevant value:- For water: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToWater.FactorEstimationMethod and in the corresponding remarks field: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToWater.EstimationMethodName- For air: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToAir.FactorEstimationMethod and in the corresponding remarks field: FLEXIBLE_RECORD.Exp
Page 70 of 105
![Page 71: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/71.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
osureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToAir.EstimationMethodName- For soil: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToSoil.FactorEstimationMethod and in the corresponding remarks field: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToSoil.EstimationMethodName
MR6004----------The content of the fields <ReleasesToTheEnvironment.ReleaseToWater.EstimationMethodName> should be migrated to the Remarks of this field.
When there is no value to migrate to the field 'Release estimation method' from the field 'Release factor Estimation
Page 71 of 105
![Page 72: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/72.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
Method' but a 'Release estimation name' is provided, please use the entry 'migration'.
225. Release factor from the site after on-site risk management (%)
Numeric (decimal)
Display: Basic
This is the release factor corresponding to the overall release factor from the site, after all on-site risk management measures have been applied.
Guidance for data migration:Depending on the value migrated to the field 'Release from site to', migrate the relevant value:- For water: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToWater.FactorAfterOnSiteRiskManagement- For air: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToAir.FactorAfterOnSiteRiskManagement- For soil: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToSoil.FactorAfterOnSiteRiskManagement
Page 72 of 105
![Page 73: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/73.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
226. Local release rate from the site (kg/day)
Numeric (decimal)
Display: Basic
The release rate is expressed in kg/day and corresponds to the amount of substance released over the day. When a release factor is provided the release rate is equal to the release factor multiplied by the daily tonnage.
Guidance for data migration:Depending on the value migrated to the field 'Release from site to', migrate the relevant value:- For water: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToWater.LocalReleaseRate- For air: FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToAir.LocalReleaseRate
227. Details on release estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
Details on release estimates can be entered in this field as free text both for modelled estimates or monitoring.
For monitoring information a freetext template can be uploaded and edited as an option. As appropriate delete/add elements.
228. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)
Describe the reliability of the release estimate by selecting the appropriate reliability score. The 'other:' option may be selected if a different scoring system is used.
Guidance for field condition:Condition: Field only active if the item
Page 73 of 105
![Page 74: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/74.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- 4 (not assignable)- other: Consult the relevant legislation -specific guidance
on how to use this field.
'measured release rate' has been selected in field 'Release estimation method'
229. Details on reliability score
Text (32,768 char.)
Display: Basic
Provide an explanation of the reason why this score was selected.
Guidance for field condition:Condition: Field only active if the item 'measured release rate' has been selected in field 'Release estimation method'
230. Block of fields (repeatable) End
231. Block of fields (repeatable) End
232. Release to external waste
Header 2
233. Release factor to external waste (%)
Numeric (decimal)
Display: Basic
The release to external waste is the sum of
• the fraction released from the process itself (including the fraction left in a packaging when relevant) as far as not treated on site and
• the fraction moved to external waste by the on-site risk management measures (applied to waste water or exhaust air).
It refers to the submission substance.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ReleasesToEnvironment.ReleaseToWaste.ReleaseFactorToExternalWaste
234. Details on release to external waste
Text (32,768 char.)
Display: Basic
Page 74 of 105
![Page 75: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/75.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
235. Exposure of the environment
Header 1
236. Block of fields (repeatable) Start
237. Predicted exposure concentration
Block of fields (repeatable) Start
238. Exposed compartment
List (picklist)
Display: Basic
Picklist values:- freshwater- sediment (freshwater)- marine water- sediment (marine water)- predators' prey (freshwater)- predators' prey (marine water)- top predators' prey (marine water)- sewage treatment plant- air- agricultural soil- non-agricultural soil- predators' prey (terrestrial)- vegetation- other:
Select the compartment for which exposure is reported in this block of fields.
Note: Only the exposure information that is to be used in the risk as-sessment should be reported.
239. Predicted exposure concentration
Numeric (decimal including unit)
Display: Basic
Unit [xx]:- ng/L- µg/L- mg/L- g/L- ng/kg ww- µg/kg ww- mg/kg ww- g/kg ww- ng/kg dw- µg/kg dw- mg/kg dw- g/kg dw- ng/m³- µg/m³- mg/m³
Report the exposure concentration which is to be used for characteris-ing the risks.
In field 'Details on exposure estimates', additional information can be given, e.g. measured data or case-specific modifications of modelled predictions. This may also include information on bioavailability.
Guidance for field condition:Conditional picklist depending on compartment selected can be implemented
Guidance for data migration:MR6217----------Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
Page 75 of 105
![Page 76: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/76.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '1920 - v1.0: freshwater': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterPelagic.PEC
phrase '61757 - v1.0: sediment (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterSediment.PEC
select phrase '8320 - v1.0: marine water': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineWaterPelagic.PEC
select phrase '61758 - v1.0: sediment (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineSediment.PEC
Page 76 of 105
![Page 77: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/77.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '61759 - v1.0: predators' prey (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FoodchainFreshwater.PEC
phrase '61760 - v1.0: predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchain.PEC
phrase '61761 - v1.0: top predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchainTop.PEC
phrase '61762 - v1.0: sewage treatment plant': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingSce
Page 77 of 105
![Page 78: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/78.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
narioForTheEnvironment.ExposureAndRisk.SewageTreatmentPlantEffluent.PECCLocal
phrase '61752 - v1.0: agricultural soil': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.AgriculturalSoil.PEC
select phrase '61764 - v1.0: predators' prey (terrestrial)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.TerrestrialFoodchain.PEC
phrase '1712 - v1.0: air': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.Air.PEC
MR6011----------2154 - v1.0 ng/kg sediment dw 61769 - v1.02499 - v1.0 µg/kg sediment dw 61770 - v1.02093 - v1.0 mg/kg
Page 78 of 105
![Page 79: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/79.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
sediment dw 2089 - v1.18600 - v1.0 ng/kg 61766 - v1.08601 - v1.0 µg/kg 61767 - v1.08602 - v1.0 mg/kg 2097 - v1.18603 - v1.0 g/kg 61768 - v1.08089 - v1.0 ng/kg soil dw 61769 - v1.08088 - v1.0 µg/kg soil dw 61770 - v1.02096 - v1.0 mg/kg soil dw 2089 - v1.13440 - v1.0 mg/m³ 58419 - v1.0
240. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- other:
The exposure to the environment can be estimated by different expo-sure estimation models or based on measured concentration in the environment. Select the method used.
Remarks:An option ‘Apply to all’ may be implemented in any software tool (as planned for IUCLID 6) which adopts the recording of the exposure esti-mation method / tool and measured data (if applicable) to all com-partments in one go. This auto-completion should not apply if the relevant fields have been populated manually. Any editing should also be possible for each compartment.
Guidance for data migration:Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
Page 79 of 105
![Page 80: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/80.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '1920 - v1.0: freshwater': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterPelagic.EstimationMethod
phrase '61757 - v1.0: sediment (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterSediment.EstimationMethod
select phrase '8320 - v1.0: marine water': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineWaterPelagic.EstimationMethod
select phrase '61758 - v1.0: sediment (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingSce
Page 80 of 105
![Page 81: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/81.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
narioForTheEnvironment.ExposureAndRisk.MarineSediment.EstimationMethod
phrase '61759 - v1.0: predators' prey (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FoodchainFreshwater.EstimationMethod
phrase '61760 - v1.0: predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchain.EstimationMethod
phrase '61761 - v1.0: top predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchainTop.EstimationMethod
Page 81 of 105
![Page 82: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/82.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '61762 - v1.0: sewage treatment plant': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.SewageTreatmentPlantEffluent.EstimationMethod
phrase '61752 - v1.0: agricultural soil': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.AgriculturalSoil.EstimationMethod
select phrase '61764 - v1.0: predators' prey (terrestrial)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.TerrestrialFoodchain.EstimationMethod
phrase '1712 - v1.0: air': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.Air.Esti
Page 82 of 105
![Page 83: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/83.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
mationMethod
241. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- EUSES- CHARM- ChemCAN- ChemSTEER- SCREEN3- AERSCREEN- AIR MOD- other:
Select which exposure estimation tool has been used.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
Guidance for data migration:Depending on the value migrated to the field 'Exposed compartment', migrate the relevant value:
phrase '1920 - v1.0: freshwater': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterPelagic.EstimationTool
phrase '61757 - v1.0: sediment (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FreshwaterSediment.EstimationTool
select phrase '8320 - v1.0: marine water': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnviron
Page 83 of 105
![Page 84: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/84.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
mentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineWaterPelagic.EstimationTool
select phrase '61758 - v1.0: sediment (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineSediment.EstimationTool
phrase '61759 - v1.0: predators' prey (freshwater)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.FoodchainFreshwater.EstimationTool
phrase '61760 - v1.0: predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchain.EstimationTool
Page 84 of 105
![Page 85: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/85.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
phrase '61761 - v1.0: top predators' prey (marine water)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.MarineFoodchainTop.EstimationTool
phrase '61762 - v1.0: sewage treatment plant': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.SewageTreatmentPlantEffluent.EstimationTool
phrase '61752 - v1.0: agricultural soil': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.AgriculturalSoil.EstimationTool
select phrase '61764 - v1.0: predators' prey (terrestrial)': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingSce
Page 85 of 105
![Page 86: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/86.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
narioForTheEnvironment.ExposureAndRisk.TerrestrialFoodchain.EstimationTool
phrase '1712 - v1.0: air': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.Air.EstimationTool
242. Version of exposure estimation tool
Text (255 char.)
Display: Basic
Provide the version number and additional details relating to the ver-sion (e.g. date or specific model or algorithm used in the case that several options are provided by the tool).
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
243. Number of measured data points
Numeric (decimal)
Display: Basic
Report the number of data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
244. Geometric standard deviation
Numeric (decimal)
Display: Basic
Report the geometric standard deviation calculated from the series of available measured data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
245. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS
Details on exposure estimates can be entered in this field as free text both for modelled estimates or measured data. This may include details on bioavailability.
For monitoring information a free-text template can be uploaded and edited as an option. As
Page 86 of 105
![Page 87: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/87.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
appropriate delete/add elements.
246. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Guidance for field condition:Condition: Field only active if the item 'measured release rate' has been selected in field 'Release estimation method'
247. Details on reliability score
Text (32,768 char.)
Display: Basic
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
248. Predicted exposure concentration
Block of fields (repeatable) End
249. Block of fields (repeatable) End
250. Attachment Attachment (multiple)
Display: Basic
Documents can be attached here, for example export files of exposure estimation tools.
251. Exposure of humans via the environment
Header 1
252. Block of fields (repeatable) Start
Page 87 of 105
![Page 88: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/88.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
253. Daily intake via food consumption
Numeric (decimal including unit)
Display: Basic
Unit [xx]:- ng/kg bw/day- µg/kg bw/day- mg/kg bw/day
Report the dose of substance to which man is exposed via food within a day. The related food items and populations are either i) determined by the modelling tool applied, or ii) can be further specified under 'Details on exposure estimates' if measured data are reported.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.ManViaEnvironment.LocalExposureViaFoodConsumption.DailyIntake
254. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- other:
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.ManViaEnvironment.LocalExposureViaFoodConsumption.EstimationMethod
255. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- EUSES- other:
Select which exposure estimation tool has been used.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioForTheEnvironmentRelatedToConsumersActivities.ContributingScenarioForTheEnvironment.ExposureAndRisk.ManViaEnvironment.LocalExposureViaFoodConsumption.E
Page 88 of 105
![Page 89: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/89.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
stimationTool
256. Version of exposure estimation tool
Text (255 char.)
Display: Basic
Provide the version number and additional details relating to the version (e.g. date or specific model or algorithm used in the case that several options are provided by the tool).
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'Exposure estimation tool'
257. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
Details on exposure estimates can be entered in this field as free text both for modelled estimates or measured data. This may include details on bioavailability. For monitoring information a free-text template can be uploaded and edited as an option. As appropriate delete/add elements.
258. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Describe the reliability of the release estimate by selecting the appropriate reliability score. The 'other:' option may be selected if a different scoring system is used. Consult the relevant legislation -specific guidance on how to use this field.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
259. Details on reliability score
Text (32,768 char.)
Display: Basic
Provide an explanation of the reason why this score was selected.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
260. Block of fields (repeatable) End
261. Contributing scenario for the environment
Block of fields (repeatable)
Page 89 of 105
![Page 90: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/90.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
(related to consumer activities)
End
262. Contributing scenario for the consumers
Tab Remarks:IT implementation issue: The section subsumed under this heading should only be active for consumers uses, i.e. when in relation to consumer use or service life for consumers.
263. Contributing scenario for the consumers
Block of fields (repeatable) Start
264. Confidentiality
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.AdministrativeData.DataProtection
265. Linked contributing activity
Link to endpoint (single)
Display: Basic
Guidance for data migration:Mapping between the use descriptor of the contributing scenario from 6.0 <FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.GeneralInformation.ProductCategory> and the use descriptor of the contributing activity in IUCLID 6.1 <ContributingActivityTechniqueForConsumers.ProductCategoryPC>
Page 90 of 105
![Page 91: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/91.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
And mapping between the use descriptor of the contributing scenario from 6.0 <><FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.GeneralInformation.ArticleCategory> and the use descriptor of the contributing activity in IUCLID 6.1 <ContributingActivityTechniqueForConsumers.ArticleCategoryAC>
266. Conditions of use for consumers
Header 1
267. Product (article) characteristics
Header 2
268. Percentage (w/w) of substance in mixture/article
Numeric (decimal)
Display: Basic
Indicate the concentration of the substance in the mixture to which the set of described use conditions refers to. If the substance is used as such, potentially 100% is to be entered.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ConditionsOfUse.ProductArticleCharacteristic.SubstanceInMixture
269. Details on the percentage of substance in mixture/article
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the concentration value provided.
270. Physical form of the used product
List (picklist)
Display: Basic
Picklist values:- gas- liquid- liquid for spraying (spraying can)
Select the physical form of the product as used. Note: This is not necessarily identical with the physical state/form of the substance as derived from manufacture. Also the form of the product
Page 91 of 105
![Page 92: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/92.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
- solid (unspecified form)- solid (very dusty form)- solid (medium dusty form)- solid (non or low dusty form)
used is not neces-sarily identical to the form to which the consumers are exposed to, as it may be modi-fied during use, for example a liquid may be sprayed and aerosols may be formed.
If the product is a solid, deter-mine the level of dustiness by analogy:
• if all or significant fraction of substance occurs in form of fine light powders similar to flour, carbon black or chalk dust select 'very dusty'
• if all or significant fraction of substance occurs in form of granular solids similar to sugar or detergents select 'medium dusty'
• if substance largely occurs as pellets not breaking up or wax, select 'low dusty form'
271. Details on physical form
Text (32,768 char.)
Display: Basic
Add explanation as needed for interpretation of the physical form information.
272. Other product (article) characteristics
Block of fields (repeatable) Start
273. Other product (article) characteristics
Text (32,768 char.)
Display: Basic
Other product characteristics impacting on exposure can be reported here. This may for example refer to viscosity of liquid product (to avoid splashes) or size of packaging (to limit amount per application).
For article, any characteristics of the article impacting on the release can be reported here such as description of the matrix.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ConditionsOfUse.ProductArticleCharacteristic.ConditionsOfUse.ConditionsOfUse
274. Other product (article) characteristics
Block of fields (repeatable) End
Page 92 of 105
![Page 93: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/93.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
275. Amounts used (or contained in articles), frequency and duration of use/exposure
Header 2
276. Block of fields (repeatable) Start
277. Conditions of use related to amount, frequency and duration
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ConditionsOfUse.AmountsUsedFrequencyAndDurationOfUse.OtherConditionsOfUse.OtherConditionsOfUse
278. Block of fields (repeatable) End
279. Information and behavioural advice for consumers
Header 2
280. Block of fields (repeatable) Start
281. Conditions of use as indicated in advice to consumers
Text (32,768 char.)
Display: Basic
Any safety advice to be con-veyed to consumers in order to control exposure can be re-ported here. This may include instructions for use. It should be noted that personal protec-tive measures are usually not expected for consumer uses.
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ConditionsOfUse.CondA
Page 93 of 105
![Page 94: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/94.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ndMeasRelatedToInfoAndBehaviouralAdviceToConsumers.ConditionsAndMeasures.ConditionsOfUse
282. Block of fields (repeatable) End
283. Other conditions affecting consumers exposure
Header 2
284. Block of fields (repeatable) Start
285. Other conditions of use
Text (32,768 char.)
Display: Basic
Guidance for data migration:FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ConditionsOfUse.ConditionsWorkerExposure.ConditionsOfUse.ConditionsOfUse
286. Block of fields (repeatable) End
287. Exposure of consumers
Header 1
288. Block of fields (repeatable) Start
Page 94 of 105
![Page 95: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/95.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
289. Exposure estimation
Block of fields (repeatable) Start
290. Type of exposure List (picklist)
Display: Basic
Picklist values:- inhalation (external) long-term exposure- inhalation (internal) long-term exposure- inhalation (external) short-term exposure- inhalation (internal) short-term exposure- dermal (external) long-term exposure- dermal (internal) long-term exposure- dermal (external) local concentration on skin- dermal (external) short-term exposure- dermal (internal) short-term exposure- oral (external) long-term intake- oral (internal) long-term intake- oral (external) short-term intake- oral (internal) short-term intake- concentration in tissue or body fluids
Select the type of exposure for which exposure is reported. This block of fields can be repeated. Only the exposure information that is to be used in the risk assessment should be reported. Please note that long-term exposure also covers repeated-dose exposure. Whether the systemic exposure estimate refers to external or internal exposure is determined by the tool/method used for predicting exposure. The corresponding information can be reported in the field 'Details on exposure estimates'. This may also include information on absorption (e.g. through the skin) and bioavailability. The appropriate unit has to be selected. The unit for the systemic exposure via dermal route is expressed as daily dose per kg bw. This unit can be used for external exposure and internal exposure. If the exposure estimate refers to concentration in body fluids (e.g. blood or urine) or tissue (e.g. hair), the corresponding item can be selected here.
291. Exposure estimate
Numeric (decimal including unit)
Display: Basic
Unit [xx]:- ng/m³- µg/m³- mg/m³- ng/kg bw/day- µg/kg bw/day- mg/kg bw/day- ng/cm²- µg/cm²- mg/cm²
Report the exposure value which is to be used for estimating the risks. In field 'Details on exposure estimates', additional information can be given, e.g. case-specific modifications of modelled predictions.
Guidance for field condition:Conditional picklist depending on compartment selected can be implemented, see pre-selected units in IUCLID for exp.concentration
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term exposure':
Page 95 of 105
![Page 96: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/96.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationSystemicLongTerm.Concentration
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationSystemicAcute.Concentration
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalLongTerm.Concentration
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalAcute.Concentration
'61781 - v1.0 dermal (internal) long-term exposure':
Page 96 of 105
![Page 97: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/97.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicLongTerm.Concentration
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicAcute.Concentration
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalLongTerm.Concentration
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalAcute.Concentration
'61789 - v1.0 oral (internal) long-term intake': FLEXIBLE_RECORD.Exp
Page 97 of 105
![Page 98: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/98.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
osureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicLongTerm.Concentration
'61791 - v1.0 oral (internal) short-term intake': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicAcute.Concentration
292. Exposure estimation method
List (picklist)
Display: Basic
Picklist values:- exposure estimation tool- measured data- negligible exposure- other:
The exposure of workers/consumers can be estimated by different exposure estimation models or based on measured data. If uses take place in rigorously contained systems an exposure close to zero (negligible) can also be demonstrated based on qualitative arguments. Select the method used for estimating the exposure.
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationSystemicLongTerm.EstimationMethod
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsume
Page 98 of 105
![Page 99: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/99.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
r.ExposureAndRisksToConsumers.InhalationSystemicAcute.EstimationMethod
'61780 - v1.0 inhalation (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalLongTerm.EstimationMethod
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalAcute.EstimationMethod
'61781 - v1.0 dermal (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicLongTerm.EstimationMethod
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.Contributi
Page 99 of 105
![Page 100: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/100.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
ngScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicAcute.EstimationMethod
'61784 - v1.0 dermal (external) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalLongTerm.EstimationMethod
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalAcute.EstimationMethod
'61789 - v1.0 oral (internal) long-term intake': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicLongTerm.EstimationMethod
'61791 - v1.0 oral (internal) short-term intake': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.Con
Page 100 of 105
![Page 101: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/101.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
tributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicAcute.EstimationMethod
293. Exposure estimation tool name
List (picklist)
Display: Basic
Picklist values:- ECETOC TRA consumers- Consexpo- AISE REACT- E-FAST- MCCEM- EGRET- WPEM- other:
Select the tool which has been used for estimating the exposure concentration
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'exposure estimation tool'
Guidance for data migration:Depending on the value migrated to the field 'Type of exposure', migrate the relevant value:
'61807 - v1.0 inhalation (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationSystemicLongTerm.EstimationTool
'61783 - v1.0 inhalation (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationSystemicAcute.EstimationTool
'61780 - v1.0 inhalation (external) long-term
Page 101 of 105
![Page 102: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/102.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalLongTerm.EstimationTool
'61782 - v1.0 inhalation (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.InhalationLocalAcute.EstimationTool
'61781 - v1.0 dermal (internal) long-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicLongTerm.EstimationTool
'61787 - v1.0 dermal (internal) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalSystemicAcute.EstimationTool
'61784 - v1.0 dermal (external) long-term
Page 102 of 105
![Page 103: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/103.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalLongTerm.EstimationTool
'61786 - v1.0 dermal (external) short-term exposure': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.DermalLocalAcute.EstimationTool
'61789 - v1.0 oral (internal) long-term intake': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicLongTerm.EstimationTool
'61791 - v1.0 oral (internal) short-term intake': FLEXIBLE_RECORD.ExposureScenarios.ContributingScenarioConsumer.ContributingScenarioConsumer.ExposureAndRisksToConsumers.OralSystemicAcute.EstimationTool
294. Version of exposure
Text (255 char.) Provide the version number and additional details relating to the version (e.g. date or specific model or algorithm used in the case that several options
Page 103 of 105
![Page 104: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/104.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
estimation tool Display: Basic are provided by the tool).
295. Number of measured data points
Numeric (decimal)
Display: Basic
Report the number of data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
296. Geometric standard deviation
Numeric (decimal)
Display: Basic
Report the geometric standard deviation calculated from the series of available measured data points that have been used to derive the exposure concentration.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
297. Details on exposure estimates
Text template
Display: Basic
Freetext template:MONITORING STUDY DESIGN AND DESCRIPTION OF SCENARIO MONITORED- Study's design:- Scope:- Objectives and scenario being monitored:SAMPLING AND ANALYTICAL METHODS- Media Sampled:- Sampling:- Method/ Procedure:RESULTSREMARKS
Details on exposure estimates can be entered in this field as free text both for modelled estimates or measured data. This may include details on bioavailability. For monitoring information a free-text template can be uploaded and edited as an option. As appropriate delete/add elements. If the exposure estimate refers to certain sub-population (e.g. children) such information can be reported here.
298. Reliability score of measured data set
List (picklist)
Display: Basic
Picklist values:- 1 (reliable without restriction)- 2 (reliable with restrictions)- 3 (not reliable)- 4 (not assignable)- other:
Describe the reliability of the release estimate by selecting the appropriate reliability score. The 'other:' option may be selected if a different scoring system is used. Consult the relevant legislation -specific guidance on how to use this field.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
299. Details on reliability score
Text (32,768 char.)
Display: Basic
Provide an explanation of the reason why this score was selected.
Guidance for field condition:Condition: Field only active if 'Exposure estimation method' is 'measured data'
Page 104 of 105
![Page 105: 306 - FLEXIBLE_RECORD... · Web viewA category can be assigned to the type of process described, providing a generic characterisation from the environmental perspective. Note that](https://reader036.vdocuments.net/reader036/viewer/2022070607/5aacbf9c7f8b9a9c2e8d6b3b/html5/thumbnails/105.jpg)
OECD Template #306: Use and exposure information: Service life (Version [1.17]-[April 2016])
Line no.
Field name Field typeDisplay type
PicklistFreetext template
Help text RemarksGuidanceCross-reference
300. Exposure estimation
Block of fields (repeatable) End
301. Block of fields (repeatable) End
302. Attachment Attachment (multiple)
Display: Basic
Documents can be attached here, for example export files of exposure estimation tools.
303. Contributing scenario for the consumers
Block of fields (repeatable) End
Page 105 of 105