30th street station intermodal signage revised bid … - station signage plan... · 30th street...
TRANSCRIPT
30th Street Station Intermodal Signage
Revised Bid Package
4 June 2012
C a l o r i & Va n d e n - E y n d e n / D e s i g n C o n s u l t a n t s1 3 0 W e s t 2 5 t h S t r e e t N e w Yo r k , N Y 1 0 0 0 1
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.001
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Symbol Edit 5/30/12
Typography Symbols
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890Frutiger 65 Bold
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890Frutiger 55 Roman
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
Arrow size measured along shaft length
Graphic Standards
Sign Type Description
A1 Large Freestanding Directional Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.005
A2 Small Freestanding Directional Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.007
A3 Overhead Directional Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.009
B1 Triangular Sign Replacement Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.011
B2 Entrance Door Transom Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.011
B3 Soffit Sign Replacement Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.012
B4 Gate ID Wall-mounted Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.012
C1 Large Wall Plaque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.013
C2 Medium Wall Plaque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.013
C3 Small Wall Plaque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.013
D Map/Directory Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.014
E Train Information Kiosk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.016
F Freestanding Gate ID Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.018
G Visitor Information Kiosk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.019
M Exterior Station ID Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.021
N SEPTA Concourse Directional Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.023
P Exterior Pedestrian Directional Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SG.024
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.002
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
Issued for final review 6/04/12
Sign Type Description
A-1
A-2
M-1
M-2
M-3
M-4
M-5
M-6
P-1
P-2
P-3
S-1
P-5
P-6
P-7
P-4
V-1
V-2
1/4" thick Scratch resistant, clear acrylic lens
1/8" thick Acrylic
1/8" thick Aluminum
1/4" thick Aluminum – NOT CALLED OUT IN DOCUMENT
1/2" thick Aluminum – NOT CALLED OUT IN DOCUMENT
1/8” thick Stainless Steel, vertical hairline finish
1/4” thick Stainless Steel, vertical hairline finish
1/2” thick Stainless Steel
Amtrak Blue: Matthews Paint SVOC 1142SP
White: Mathews Paint SV202SP
Amtrak Silver: Matthews Paint MP18073
Black: Matthews Paint SV923SP
White silkscreen, to match Mathews Paint SV202SP
Amtrak Blue silkscreen, to match Matthews Paint SVOC 1142SP
Bronze: Du Pont Flat YM047 Spectramaster Yellow
Stone Source Charcoal Black, hone finish
White Vinyl: 3M Scotchcal Electrocut White 7725-10
Blue Vinyl: 3M Scotchcal Electrocut to match PMS 302 - Amtrak Blue
Materials Legend
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.003
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Paint Addition 5/30/12
Issued for final review 6/04/12
Materials Legend
Sign Type A1
Sign Type FSign Type D
Scale: 3/16” = 1’-0”Scale: 1/8” = 1’-0”
Sign Type N Sign Type P
Scale: 3/16” = 1’-0” Scale: N.T.S.
Scale: 3/16” = 1’-0”
Sign Type E Sign Type G Sign Type M
Sign Type B1 Sign Type B2 Sign Type B4Sign Type B3
Amtrak Tickets
29th Street
Gate 3
Sign Type C1, C2 & C3
SERVICES
Baggage Pick–up Baggage Check–in
Handicapped
Taxis
Parking
Redcap Baggage
Pay Phone
Tickets / Customer Service
Car Rentals
Elevators
Escalators / Stairs
TTD Phone
Change Machine
Restroom / Men
Restroom / Women
Ticket Express
N
You are
Here
RETAIL
Ann K Flower Shop4
Cellular Advantage6
GNC7
30th Street Greetings15
Phoenix Shoe Shine23
Faber Books26
Post Office27
Faber Books33
Ann K Flower Shop34
Bridgewater’s PubAuntie Anne’s PretzelsSurf City Squeeze
3
SaladWorks 5
Subway8
KFC Express9
Pizza Hut / Taco Bell10
Oriental Foor Fair11
Cucina Italiano12
Au Bon Pain13
Boardwalk Fries14
Cosi16
Delilah’s 17
Dunkin’ Donuts18
Ben & Jerry’s Ice Cream 21Bucks County Coffee
22
Auntie Anne’s Pretzels24
McDonald’s 28
Bucks County Coffee Cafe 29Dunkin’ Donuts
30
Vending Machines31
Auntie Anne’s Pretzels32
N
You are
Here
Directory
30th Street Station
Sign Type A2 Sign Type A3
Stairway
DischargeThis Level
Roof Access
21RegionalRail
NOSMOKING
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
Regional Rail
Car Rental
Buses11, 21, 42, 36, 113
Taxis
Amtrak Tickets
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
Trolley Lines
Buses9, 30, 31, 44, 124
Market-Frankford Line
Visitor Information
Tracks 5 & 6
Elevator to Tracks
Tracks 5 & 6
Main Concourse
SEPTA Tickets
Trolley Lines
Market-Frankford Line
Buses9, 30, 31, 44, 124
Buses11, 21, 42, 36, 113
Public Transportation
Trolley Lines
Market-Frankford Line
Buses9, 30, 31, 44, 124
Public Transportation
Train Information Gate 3
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.004
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
Issued for final review 6/04/12
Sign Family
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.005
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Regional Rail
Car Rental
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
Regional Rail
Car Rental
Buses11, 21, 42, 36, 113
Taxis
Amtrak Tickets
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
14’-0” radius curve.
3/4” radius curve.
Edge of sign box to terminate atcorner of flute.
Curvatures of flutes to extend overthe fabricated sign box, top & bottom.
Scale: 1/4” = 1’-0”
Sign Type A1 - Elevations1Scale: 1/2” = 1’-0”
Sign Type A1 - Sign Panel Layout4
Scale: 1” = 1’-0”
Sign Type A1 - Detail 12
Scale: 1” = 1’-0”
Sign Type A1 - Detail 23
2
3
Side View Front View
Top View
V-1
M-1 P-1
M-1 P-3
S-1
3SG.006
2SG.006
1SG.006
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
NOTE: Panel artwork to be providedby designer.
20'-9"
9'-10"
20'-0"
4 1/2"
11"
4 1/2"
3" 2"
4 1/2"
6 5/8"
5 1/2"
7"
5"
6'-2"
3'-8"3'-4"
2"1'-0"
2'-4"
2'-0"
4 1/2" 4 1/2"
4 1/2"
4 1/2"
5 1/2"
Revisions
No. Description Date
1 Dimension correction 07/27/11
2 Size/Layout Rev. 5/24/12
Issued for final review 6/04/12
Sign Type A1Elevations & Details
Scale: 1” = 1’-0”
Section1
Scale: 1” = 1’-0”
Section2
Scale: 1” = 1’-0”
Section3
1/2” radius corner,all edges.
Stone base
Flute cladding to beattached to internalsupport structure.
Internal framing, as required,to prevent oil canning, deflection, etc.
Suggested anchor bolts,as required for secure connection.Fabricator to providestamped engineering drawings of final connectiondetails. Coordination withAmtrak Engineering required.
Sign box to be attached securely to vertical structure.Fabricator to proposeappropriate method.
Internal support tower structure
Existing floor
Tower base anchor plate
Flute cladding
14’-0” radius curve
NOTES:1. Fabricator to verify field condition and to propose appropriate mounting.
2. Fabricator to coordinate/verify floor condition with Amtrak Engineering.
3. Engineering calculations and details required and provided by Fabricator.
S-1
1” radius corner,all corners.
5” radius flute curve
Internal support structure
Seam in stone
M-1
14’-0” radius stone curveFace of sign panels to alignwith inside radius of stonebase.
14’-2” radius stone curve
M-1 P-1
3'-8"
3'-4"
2'-4 1/2" 2'-1/2"
1'-1 1/2"
1 1/2"
5 1/2"
2'-1/2"
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.006
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Dimension Rev 5/29/12
Issued for final review 6/04/12
Sign Type A1Construction Details
7’-0” radius curve.Curvatures of sign box and base to align.
1/4” reveal.
Edge of sign box to terminate atcorner of flute.
Edge of base to terminate atapex of flute.
Buses11, 21, 42, 36, 113
Taxis
Amtrak Tickets
Buses9, 30, 31, 44, E124
Trolley Lines
Market-Frankford Line
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
Buses11, 21, 42, 36, 113
Taxis
Amtrak Tickets
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
8"
1/2"
1'-1 1/2"
2'-10"
3'-10 3/4"
3" 3"
3"
3"
7"
6"
6'-8 1/2"
6'-11 1/2"
7'-8"
3 1/8"
2 3/4" 1 3/8"
2"
3"
4 7/8"
2 1/4"1 3/8"
Scale: 1/2” = 1’-0”
Sign Type A2 - Elevations1
Scale: 1” = 1’-0”
Sign Type A2 - Sign Panel Layout4
Scale: 1” = 1’-0”
Sign Type A2 - Detail 13
Side View Front View
Top View
1/2” Reveal.
1SG.008
2SG.008
P-5
M-1 P-1
M-1 P-3
M-1 P-4
M-1 P-3
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
NOTE: Panel artwork to be providedby designer.
Scale: 1” = 1’-0”
Sign Type A2 - Detail 22
3
2
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.007
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Layout/Size Rev 5/29/12
Issued for final review 6/04/12
Sign Type A2Elevations & Details
NOTES:1. Fabricator to verify field condition and to propose appropriate mounting.
2. Fabricator to coordinate/verify floor condition, with Amtrak.
3. Engineering and structural calculationsrequired and provided by fabricator.
Scale: 1 1/2” = 1’-0”
Section1
Scale: 1 1/2” = 1’-0”
Section2
1” radius corner.
4” radius flute curve.
7’-0” radius curve.
Horizontal support structure,as required.
Internal support structure,as required.
Fastener, as required, to securelyattach flutes.
Vertical internal supportstructure.
Horizontal support brace, as required.
Horizontal support brace,as required.
Align edge of base to apex of flute.
1/4” Reveal
M-1 P-3
P-4
P-4
M-1 P-3
Existing floor
Provide necessary internal structure for base.
Base anchor plate
Sign box base plate
1/2” reveal
Anchor bolt as requiredfor secure connection.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.008
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
Issued for final review 6/04/12
Sign Type A2Construction Details
Trolley Lines
Buses9, 30, 31, 44, 124
Market-Frankford Line
Trolley Lines
Buses9, 30, 31, 44, 124
Market-Frankford Line
Trolley Lines
Buses9, 30, 31, 44, 124
Market-Frankford Line
Scale: 1/2” = 1’-0”
Sign Type A3 - Elevations1
Scale: 1” = 1’-0”
Sign Type A3 - Sign Panel Layout3
Scale: 1” = 1’-0”
Sign Type A3 - Detail 12
Scale: 1” = 1’-0”
Sign Type A3 - Detail 24Scale: 1” = 1’-0”
Sign Type A3 - Ceiling Escutcheon5
Side View Front View
Bottom View
2
4
Edge of sign box to terminate atcorner of flute.Curvature of flutes to extend overthe fabricated box.
4” radius curve flute. Curvatures of flutes to extend over the fabricated sign box, top & bottom.
7/8” diameter corner.
14’-0” radius curved panel.
14’-0” radius curved escutcheon.
Line of flute cladding.
P-7
Escutcheon
M-1 P-7
P-7
M-1 P-1
V-1
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
NOTE: Panel artwork to be providedby designer.
2
5
1SG.010
12'-0" MIN.Verify ceiling height
2'-5"
2"
5'-6"
2'-6"
4"
3" 3"
3"
3"
2'-6"
1'-0"
V.I.F. 3"
3"
4 5/8"
3"
7 3/8"
4 3/8"
2"
2"
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.009
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Color Change 5/24/12
2 Size/Layout Rev 5/30/12
Issued for final review 6/04/12
Sign Type A3Elevations & Details
6"
4"
Scale: 1 1/2” = 1’-0”
Section1
Scale: 1 1/2” = 1’-0”
Section2
M-1 P-7
P-7
M-1 P-1
Flute cladding to beattached to internalsupport structure.
Sign box.
Internal support structures,as required.
Internal sign box framing,as required, to preventoil canning, deflection, etc.
Internal support structure,as required.
14’-0” radius curve
Escutcheon
Escutcheon
Ceiling mounting plate
Fabricator to verify ceiling condition. Coordinate appropriate mounting with Amtrak. Fabricator to provide stamped engineering drawings of final connection details.
NOTES:1. Fabricator to verify field condition and to propose appropriate mounting.
2. Fabricator to coordinate/verify ceilingcondition with Amtrak.
3. Engineering calculations and details required and provided by Fabricator.
Sign box to be attached securely to vertical structure.Fabricator to propose appropriate method.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.010
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Detail/Color Rev 5/24/12
Issued for final review 6/04/12
SG.010
Sign Type A3Construction Details
4'-2 1/2" V.I.F.
1'-7 1/2" V.I.F. 1'-0"
Scale: 1/4” = 1’-0”
Sign Type B1 - Elevations2Scale: 1/2” = 1’-0”
Sign Type B1 - Sign Panel Layout1
V-1
Existing structure
New sign panel to be replaced with existingor installed over existing surface.
NOTES:1. Fabricator to verify exisiting field conditionand dimensions.
2. Sign panel to be replaced with new panelor to be installed over existing structure.
3. Fabrciator to remove existing letteringand/or panel.
4. Fabricator responsible for patching and retouching of surface damage, caused during removal of existing signs.
5. Fabricator may suggest alternate material,thickness for sign type B1 & B2. Subject to field conditions and owner approval.
29th Street
Scale: 3/4” = 1’-0”
Sign Type B2 - Sign Panel Layout3
M-1
V-1
P-1
Varies
CL
1'-1" V.I.F.
Center text on panel.
5"
29th Street
Scale: 1/4” = 1’-0”
Sign Type B2 - Elevations4
and/orM-1 P-1
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.011
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Material Rev 5/30/12
Issued for final review 6/04/12
Sign Type B1 & B2Elevations & Details
Gate 3Amtrak Tickets
Amtrak Tickets
1'-8 1/4" V.I.F.7 1/4" 4 3/8"
Scale: 1/4” = 1’-0”
Sign Type B3 - Elevations2
Scale: N.T.S.
Ventilation Structure Painting3
Scale: 1/2” = 1’-0”
Sign Type B3 - Sign Panel Layout1
Retain existingopening for proper ventilation.
Existing HVACventilation structure
Existing Condition Proposed
V-1
P-1
Existing trim to be painted gold,to match the front side.
Sign type B2, without grill opening. NOTES:
1. Fabricator to verify exisiting field conditionand dimensions.
2. Sign panel to be replaced with new panelor to be installed over existing structure.
2. Fabrciator to remove existing letteringand/or panel.
3. Fabricator to coordinate removal ofventilation grill with Amtrak.
4. Fabricator responsible for patching and retouching of surface damage, caused during removal of signs.
5. Fabricator to paint existing ventilation unit (see drawing 3/SG.012).
6. Fabricator to paint existing sign panel(see details 5/SG.012 & 6/SG.012).
7. Fabricator may suggest alternate material,thickness for sign type B3 & B4. Subject to field conditions and owner approval.
Gate 3
Scale: 3/16” = 1’-0”
Sign Type B4 - Elevations5Scale: 3/16” = 1’-0”
Advertisement Elevation6
Scale: 3/4” = 1’-0”
Sign Type B4 - Sign Panel Layout4
Existing sign boardto remain
P-1P-1
Existing ad panelto remain
V-1
and/orM-1 P-1
and/orM-1 P-1
CL
Center text on panelCL
Center graphics on panel
3'-9 1/2"
1'-2 1/4" V.I.F. 6"
5'-9" V.I.F.
8'-8" V.I.F.
5'-9" V.I.F.
8'-8" V.I.F.
9'-5 1/4" V.I.F.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.012
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Material Rev 5/30/12
Issued for final review 6/04/12
Sign Type B3 & B4Elevations & Details
Stairway
DischargeThis Level
Roof Access
Scale: 1 1/2” = 1’-0”
Sign Type C1 - Typical Layout1
Scale: 1 1/2” = 1’-0”
Sign Type C2 - Typical Layouts2
Scale: 1 1/2” = 1’-0”
Sign Type C3 - Typical Layouts3
Scale: 6” = 1’-0”
Sign Type C - Side View4Scale: 6” = 1’-0”
Sign Type C - Top View5
Scale: 1 1/2” = 1’-0”
Sign Type C1 - Disassembled view6
21
Stairway
DischargeThis Level
Roof Access
21
RegionalRail
NOSMOKING
NO LOITERING
Violators will be prosecuted under City Ordinance10-603-2
Rental CarGarage
Use This Elevatorfor Rental Car Garage
Restroom
Color to wraparound all edges.
Background color & graphicsapplied to the first surface
and edges.
Unpaintedarea for secure
laminatingadhesion
Painted onfirst surfaceand edges.
Front Panel Back Panel
VHB tape
Existing wallP-5
A-2
A-2
P-1
P-7
A-2
A-2
P-1
A-2 P-1 P-5
P-3
NOTES:1. Sign type C, not located in sign location plan and message schedule.
2. Fabricator to provide unit cost for C1, C2 & C3. Quantity T.B.D.
3. Fabricator to remove existing plaque signs. Fabricator responsible for patching & retouching, caused during removal.
A-2 P-7
1'-8"1'-5"
1'-2"
1"
10"
3/4"
1'-0" 1'-2"
8"
1/2"
9 1/2" 11"
1'-2" 1'-2"
1'-4"
1'-8" 1'-5"1'-8"
1/4"
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.013
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Color Change 5/24/12
Issued for final review 6/04/12
Sign Type CLayouts & Details
SERVICES
Baggage Pick–up Baggage Check–in
Handicapped
Taxis
Parking
Redcap Baggage
Pay Phone
Tickets / Customer Service
Car Rentals
Elevators
Escalators / Stairs
TTD Phone
Change Machine
Restroom / Men
Restroom / Women
Ticket Express
N
You are
Here
RETAIL
Ann K Flower Shop4
Cellular Advantage6
GNC7
30th Street Greetings15
Phoenix Shoe Shine23
Faber Books26
Post Office27
Faber Books33
Ann K Flower Shop34
Bridgewater’s PubAuntie Anne’s PretzelsSurf City Squeeze
3
SaladWorks 5
Subway8
KFC Express9
Pizza Hut / Taco Bell10
Oriental Foor Fair11
Cucina Italiano12
Au Bon Pain13
Boardwalk Fries14
Cosi16
Delilah’s 17
Dunkin’ Donuts18
Ben & Jerry’s Ice Cream 21Bucks County Coffee
22
Auntie Anne’s Pretzels24
McDonald’s 28
Bucks County Coffee Cafe 29Dunkin’ Donuts
30
Vending Machines31
Auntie Anne’s Pretzels32
N
You are
Here
Directory
30th Street Station
1SG.015
Directory
N
You are
Here
RETAIL
FOOD & BEVERAGE
Bridgewater’s Pub 1Auntie Anne’s Pretzels 2Surf City Squeeze 3SaladWorks 5Subway 8KFC Express 9Pizza Hut / Taco Bell 10Oriental Foor Fair 11Cucina Italiano 12Au Bon Pain 13Boardwalk Fries 14Cosi 16Delilah’s 17Dunkin’ Donuts 18Ben & Jerry’s Ice Cream 21Bucks County Coffee 22Auntie Anne’s Pretzels 24McDonald’s 28Bucks County Coffee Cafe 29Dunkin’ Donuts 30Vending Machines 31Auntie Anne’s Pretzels 32
FOOD & BEVERAGE12
Side ViewFront View
Top View
Scale: 1/2” = 1’-0”
Sign Type D - Elevations1
Map, provided by owner
Camlock.Provide 2, top and bottom.
Curved window with flush fitted lens.
4'-0"
3'-0"
3'-7" 3'-2"
3'-6"
3'-0"
3'-0"
M-1 P-7
P-5
A-1
3"6 1/2"
Scale: 1” = 1’-0”
Sign Type D - Detail 12
Scale: 1” = 1’-0”
Sign Type D - Detail 23
8’-0” radius curveCurvatures of sign box and base to align.
Edge of sign box to terminate at corner of flute.
1/4” reveal
Corner of flute to terminate at wall.
3” radius curve flute
Existing wall
2 1/2" 2 1/2"
2 1/2"
2 1/2"4 1/4"
M-1 P-1
2SG.015
2
3
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.014
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Color Change 5/24/12
Issued for final review 6/04/12
Sign Type DElevations & Details
Scale: 3” = 1’-0”
Sign Type D - Section1
Scale: 3” = 1’-0”
Sign Type D - Section2
A-1
P-2
P-1
P-1
M-1
M-1
P-4
Internal framing,as required.
Cabinet door
Continous hinge
Map, provided by owner Hex-socket camlock,2 required
Cabinet doorwith flush fittedacrylic lens
Sign to be securely mounted to wall surfaces.
Map, provided by owner
Inner box form welded toouter mounting box.
Outer mounting box,with open back, securely
mounted to wall.
Flush fit lens.
1/4” reveal all around
Fastener, as required, to securelyattach flutes.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.015
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type DConstruction Details
Train Information
M-1 P-3
Side View Front View
Top View
Scale: 1/2” = 1’-0”
Sign Type E - Elevations1
Scale: 1” = 1’-0”
Sign Type E - Detail 23
Scale: 1” = 1’-0”
Sign Type E - Detail 12
1/2"
7’-0” radius curve.Curvatures of sign box and base to align.
1/4” reveal.
2
3
Edge of sign box to terminate atcorner of flute.
Edge of base to terminate at apex of flute.
4” radius flute curve
Electronic Display.NEC LCD3210-BKor approved equal.
P-5
P-5
M-1 P-1
M-1 P-3
M-1 P-4
A-1
1SG.017
2SG.017
Train Information
3SG.016
1'-6"
3'-1"
4'-1 1/2"
3"
3"
2 3/4"
3"3"
1'-6"2'-6"
2'-0"
8"
10 1/8"
6'-8 1/2"
6'-11 1/2"
7'-8"
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.016
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Size Rev 5/30/12
Issued for final review 6/04/12
Sign Type EElevations & Details
Horizontal internal frame, as required.
Horizontal internal frame,as required, to prevent
door from warping.
Internal structure, as required.
Internal structure as required.
Fastener as requiredfor flutes attachmet.
Scale: 1 1/2” = 1’-0”
Sign Type E – Section2
Scale: 1 1/2” = 1’-0”
Sign Type E – Section3Scale: 1 1/2” = 1’-0”
Sign Type E – Section1
P-4
P-4
4” radius curve flute
1” radius curve corner on base.
M-1 P-3
Align edge of baseto apex of flute.
Align edge of base to apex of flute
1/4” reveal
This to acommodate electrical gear provided by Amtrak Subcontractor IDS, if rquired.
7’-0” radius curve
Metal base. Providenecessary internal support.Construction detailsimilar to sign type A2.
Cam lock,as required.
Hex-socket camlock,2 minimum required.
Continoushinge, as required.
Continoushinge, as required.
NOTES:1. Fabricator to verify field condition and to propose appropriate mounting.
2. Fabricator to coordinate/verify floor condition with Amtrak.
3. Structural engineering calculations required by Fabricator.
4. Coordinate location of data and powerfeeds brought to sign location byAmtrak or Amtrak Subcontractor.
5. Base detail similar to sign type A2.
Electronic Display, securely mountedto internal structure.NEC LCD3210-BK or approved equal.Fabricator to provide necessary workto pull power/data to the location.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.017
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type EConstruction Details
Gate 3
8"
1/2"
1'-10"
4 1/4"
2'-10"
3'-10 3/4"
1'-6"
3'-4 1/8"
3"
3"
3"3"
2"
10 1/8"
6'-8 1/2"
6'-11 1/2"
7'-8"
2
3
Side View Front View
Top View
Scale: 1/2” = 1’-0”
Sign Type F - Elevations1
Scale: 1” = 1’-0”
Sign Type F - Detail 12
Scale: 1” = 1’-0”
Sign Type F - Detail 23
7’-0” radius curve.Curvatures of sign box and base to align.
Edge of sign box to terminate atcorner of flute.
Edge of base to terminate at apex of flute.
P-5
P-5
A-1
M-1 P-3M-1 P-3
M-1 P-3M-1 P-3
M-1 P-1
M-1 P-4
Electronic Display.NEC LCD4620-2-AV or approved equal.Fabricator to provide for easy connection ofpower/data at sign location.
1/4” reveal.
NOTES:1. Construction similar to sign type E.
2. Fabricator to verify field condition and to propose appropriate mounting.
3. Fabricator to coordinate/verify floor condition with Amtrak.
4. Structural engineering calculation required and provided by Fabricator.
5. Coordinate location of data and power feeds brought to sign location by Amtrakor Amtrak Subcontractor.
4” radius curve flute.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.018
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Size Rev 5/30/12
Issued for final review 6/04/12
Sign Type FElevations & Details
Side View Front View
Top View
Visitor Information
Visitor Information
4 1/2"
8"
1/2"
1'-1 1/2"
2'-10"
3'-10 3/4"
3'-4"
2'-3"
3"
3"
3"3"
3"
7"
6'-8 1/2"
6'-11 1/2"
7'-8"Insert, provided by owner.
2
3
Scale: 1/2” = 1’-0”
Sign Type G - Elevations1
Scale: 1” = 1’-0”
Sign Type G - Detail 12
Scale: 1” = 1’-0”
Sign Type G - Detail 23
7’-0” radius curve.Curvatures of sign box and base to align.
Edge of sign box to terminate atcorner of flute.
Edge of base to terminate at apex of flute.
P-5
A-1
M-1 P-1
M-1 P-3M-1 P-3
M-1 P-3M-1 P-3
M-1 P-4
1SG.020 2
SG.020
1/4” reveal.
4” radius curve flute.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.019
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Size Rev 5/30/12
Issued for final review 6/04/12
Sign Type GElevations & Details
Scale: 1 1/2” = 1’-0”
Sign Type G – Section1Scale: 1 1/2” = 1’-0”
Sign Type G – Section2
1” radius corner.
4” radius flute curve.
7’-0” radius curve.
Fastener, as required, to securelyattach flutes.
Internal support structure,as required.
Hex-socket camlock, 3 required per door.
Align edge of base to apex of flute.
1/4” Reveal
M-1
P-4
1/4” Reveal P-4
P-4
P-1
M-1 P-3
Insert, provided by owner.
Insert, provided by owner.
Internal structure as required.
Horizontal internal frame,to prevent doors fromwarping, as required.
Fastener as requiredfor flutes attachmet.
Continoushinge, as required.
Continoushinge, as required.
NOTES:1. Fabricator to verify field condition and to propose appropriate mounting.
2. Fabricator to coordinate/verify floor condition with Amtrak.
3. Structural engineering calculations required and provided by Fabricator.
4. Base detail similar to sign type A2.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.020
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type GConstruction Details
Scale: 3/16” = 1’-0”
Sign Type M - Elevation1
Fabricated stainless steel freestanding letters in Frutiger Bold.
Two sets of letters required. Sign M1.084 to be installedin a straight, linear manner within an existing planter area.Some soil and plant material excavation required.See visualization, SG.022, Rendering 2.
One set (Sign M1.083) to be installed in an arc (in plan)arrangement. See visualization, SG.022 Rendering 1.
Letters shown in linear elevation for reference.
Stone clad barrier wall in front of letter forms,Signs M1.083 and M1.084.
Scale: 1/2” = 1’-0”
Sign Type M - Detail2Scale: 1/2” = 1’-0”
Sign M1.083 - Section3
No fill material inside of existingmasonry wall.
3” dia. stainless steel support assembly and armature. Quantity and size to be confirmed by fabricator and engineering analysis.
Existing masonry wall
1/4” stainless steel decorative ribs,continuous on length of installation.Ribs to be connected on site usinglap seams and mechanical fasterners.Ribs to provide structural stability ofsupport rods.
3'-0"
3
mounting plate
New concrete pad secured to deckand sealed against water infiltration.
Anchor bolt, as required.
Fabricator to provide provisionalsum for lighting of sign M1.083.
M-5
M-4
M-5
M-6
1SG.022
4'-0" 4'-2" +/-
52'-8" +/-
3'-0"
Equal on center
2'-0" 10"
4'-0"
NOTES:
Coordinate location of powerfeeds brought to sign location byAmtrak or Amtrak Subcontractor.
Fabricator to coordinate with AmtrakEngineering.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.021
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Size Rev 5/24/12
Issued for final review 6/04/12
Sign Type MElevations & Details
M-4
1/4” stainless steel ribs, continuous on length of installation. Ribs to be connected on site using lap seams and mechanical fasterners. Ribs to provide structural stability of supportrods.
Mounting plate
M-5
M-6
Scale: 1/2” = 1’-0”
Sign M1.084- Section1
Existing masonry wall
Remove existing plant and soil materials, this area.Replace soil material after installation of signsupport structure. Coordinate replacementof soil and plant material with Amtrak personnel.
Approximate existing soil line
10"
3'-0"
2'-0"
New concrete pad(s) sitting on existing deck.Do not attach. Do not penetrate existingwater barrier membrane.
Fabricator toprovide provisionalsum for lighting of
sign M1.084.
NOTES:
Coordinate location of powerfeeds brought to sign location byAmtrak or Amtrak Subcontractor.
Fabricator to coordinate with AmtrakEngineering.
Rendering 2South East Elevation, Sign number M1.084
Rendering 1South West Corner, Sign number M1.083
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.022
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type MConstruction Details & Renderings
Tracks 5 & 6
Elevator to Tracks
Tracks 5 & 6
Main Concourse
Tracks 5 & 6
Main Concourse
SEPTA Tickets
Tracks 5 & 6
Elevator to Tracks
Tracks 5 & 6
Main Concourse
SEPTA Tickets
4"
2 3/8"
4 5/8" 3"
7 1/2"
1 1/2"
Scale: 1/4” = 1’-0”
Sign Type N - Elevation1
Scale: 1/2” = 1’-0”
Sign Type N - Detail3
Scale: 1” = 1’-0”
Sign Type N - Detail2
2
Existing beam
V-1
P-1
NOTES:1. Fabricator to verify field condition and dimensions.
2. Fabricator to remove existing sign.
3. Lettering artwork to be provided by Designer.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.023
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Layout Rev 5/30/12
Issued for final review 6/04/12
Sign Type NElevations & Details
5"
3"4"
Trolley Lines
Market-Frankford Line
Buses9, 30, 31, 44, 124
Trolley Lines
Market-Frankford Line
Buses9, 30, 31, 44, 124
Scale: 1/2” = 1’-0”
Sign Type P - Elevations1
Scale: 1” = 1’-0”
Sign Type P - Sign Layout2
Scale: 1 1/2” = 1’-0”
Sign Type P - Detail 13
Side View Front View
Top View
Color to wrap sides and top.
6’-0” radius curve
Color to wrap sides and top.
Countersunk fastener,as required.Painted to match surrounding colors.
Countersunk fastener,as required.Painted to match
Metal cap,welded to sign post.
Escutcheon.
3
P-3
P-3P-3
P-3
M-1 P-3
V-2
P-1
1SG.025
1 1/2"
1 1/2"
3 3/4"
2SG.025
3'-7"
2'-11"
4"
3'-3"
7'-5"
3 1/4"9"
11'-2"
2"
1'-6"
NOTE: Messages shown for reference only and do not depict final layouts, text, symbols or arrows and are subject to change.
NOTE: Panel artwork to be providedby designer.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.024
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type PElevations & Details
Scale: 3” = 1’-0”
Sign Type P - Section1
Scale: 1 1/2” = 1’-0”
Sign Type P - Section2
Countersunk fastener,as required.
Back panel attached securely to post
Back panel attached securely to post
Existing paved area
Anchor bolts, as required.
Countersunk fastener,as required.
Anchor plate, as required.
5” post
Escutcheon.P-3
Metal cap.P-3
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SG.025
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Type PConstruction Details
N
A2 002
A1 001
A3 003
B1 004
B1 005
B1 007
B1 008
B1 009
B1 010
B1 011
B1 012
B1 013
B1 014
B1 020
B2 019
B1 006
B1 021
B1 022
B1 024
B1 026
B1 028
B1 023
B1 025
B1 027
B1 029
B1 030
B2 018
B2 017
B2 016
B2 015
A A A A A
B2 031
B2 033
B2 034
B2 035
A A A A A
B2 032
AA B
A BB
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
NOTE:1. Sign locations shown are forreference only. Actual locationsshall be verified in field.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.001
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Location Plan
N
B3 037
B3 038
B3 039
B4 040
B3 041
B3 042
B4 043
B3 044
B3 045
B3 046
B4 047
B3 048
B3 050
B4 051
B3 052
B3 053
B4 054
B3 055
B3 049
B4 056
B3 133
B3 134
B3 057
B3 060
B4 061
B3 062
B3 065
B3 070
B3 075
B3 077
B4 071
B4 076
B4 066
B3 067
B3 072
B3 058
B3 059
B3 064
B3 069
B3 074
B3 063
B3 068
B3 073
B3 079
B3 080
B3 078
A A
A
A
A
A
A A
A A
A
A
A
A
A
A
A
A
A
A A
A A
A A
A A
A A
A A
A A
A A
A A
A
A A
A
A
A
A
A
A
E 036A B
NOTE:1. Sign locations shown are forreference only. Actual locationsshall be verified in field.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.002
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Location Plan
N
M 081
M 084
A
A
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A B
G 083A
B
D 082
A
A
A
D 085
F 087
F 132
F 088
D 090
F 091
F 092
G 093
F 089
F 086
D 094
A
NOTE:1. Sign locations shown are forreference only. Actual locationsshall be verified in field.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.003
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Revisions
No. Description Date
1 Location Change 524/12
Issued for final review 6/04/12
Sign Location Plan
A
A
A
A
A
A B A B A B
A BA
B
AB
A
A
B
A
A
AA
AA
A
A
A
B
B
A
AAA
B A B B
AB
A B
AA
AA
AA
A
B
N
A
P 096
P 095
B2 097
B2 098
E 099
A3 100
B2 101
B2 103
B2 104
P 106
P 107
B2 111
B2 108
B2 109
B2 110
A3 112
B2 105
A2 102
E 116
B2 115
B2 113
B2 118
A3 120
A3 121
B2 117
B2 114
G 122
N 123
N 124
N 125
N 126
B2 127
N 128
N 129B2 130
A3 131
B2 119
NOTE:1. Sign locations shown are forreference only. Actual locationsshall be verified in field.
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.004
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Location Plan
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.001 [Side A](Right Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}(Horizontal Rule)(Up Arrow) (Taxi Symbol) Taxis(Amtrak Ticket Symbol) Amtrak Tickets(Bus Symbol) Buses{Bus Numbers TBD}(Horizontal Rule)(Left Arrow) (SEPTA Regional Rail Symbol) SEPTARegional Rail(Car Rental Symbol) Car Rental
[Side B](Left Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}(Horizontal Rule)(Right Arrow) (SEPTA Regional Rail Symbol) SEPTARegional Rail(Car Rental Symbol) Car Rental
A1 1001 Large freestanding directional sign
2
SL.001 [Side A](Up Arrow) Main Concourse(SEPTA Regional Rail Symbol) SEPTARegional Rail(Amtrak Ticket Symbol) Amtrak Tickets(Car Rental Symbol) Car Rental(Horizontal Rule)(Right Arrow)(Bus Symbol) Buses{Bus Numbers TBD}
[Side B](Up Right Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}(Horizontal Rule)(Left Arrow) (Bus Symbol) Buses{Bus Numbers TBD}
A2 1002 Small freestanding directional sign
2
SL.001 [Side A](Up Arrow) Main Concourse(SEPTA Regional Rail Symbol) SEPTA(Amtrak Ticket Symbol) Amtrak Tickets(Right Arrow) (Food Court Symbol) Food Court
[Side B](Up Arrow) (SEPTA Subway Symbol) SEPTA(SEPTA Trolley Symbol) SEPTA(Bus Symbol) Buses(Left Arrow) (Food Court Symbol) Food Court
A3 1003 Overhead directional sign2
SL.001 [Side A]Blank - No text or symbol
[Side B](SEPTA Symbol) SEPTA
[Side B Alt.](Subway Symbol)(Trolley Symbol)SEPTA
B1 1004 Existing triangular signs on columns
2
SL.001 [Side A](SEPTA Subway Symbol)(SEPTA Trolley Symbol) SEPTA
[Side B](Food Court Symbol)
[Side A Alt.](SEPTA Symbol)SEPTA
B1 1005 Existing triangular signs on columns
2
Page 1
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.001 [Side A]10
[Side B]10
B1 1006 Existing triangular signs on columns
2
SL.001 [Side A](Blank)
[Side B](Blank)
B1 1007 Existing triangular signs on columns
2
SL.001 [Side A]8
[Side B]8
B1 1008 Existing triangular signs on columns
2
SL.001 [Side A](Food Court Symbol)
[Side B](Food Court Symbol)
B1 1009 Existing triangular signs on columns
2
SL.001 [Side A]6
[Side B]6
B1 1010 Existing triangular signs on columns
2
SL.001 [Side A](Food Court Symbol)
[Side B](Food Court Symbol)
B1 1011 Existing triangular signs on columns
2
SL.001 [Side A]4
[Side B]4
B1 1012 Existing triangular signs on columns
2
SL.001 [Side A](Books/Newsstand Symbol)
[Side B](Books/Newsstand Symbol)
B1 1013 Existing triangular signs on columns
2
SL.001 [Side A]2
[Side B]2
B1 1014 Existing triangular signs on columns
2
SL.001 29th StreetB2 1015 Station entrance door transom signs
1
SL.001 Taxis (Alt. Center City)B2 1016 Station entrance door transom signs
1
SL.001 29th Street (Alt. Center City or Taxis)
B2 1017 Station entrance door transom signs
1
SL.001 Taxis (Alt. Center City)B2 1018 Station entrance door transom signs
1
SL.001 29th StreetB2 1019 Station entrance door transom signs
21
Page 2
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.005
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.001 [Side A]1
[Side B]1
B1 1020 Existing triangular signs on columns
2
SL.001 [Side A](Tickets Symbol)Amtrak Tickets
[Side B](Tickets Symbol)Amtrak Tickets
B1 1021 Existing triangular signs on columns
2
SL.001 [Side A]3
[Side B]3
B1 1022 Existing triangular signs on columns
2
SL.001 [Side A](Red Cap Symbol)Red Cap
[Side B](Red Cap Symbol)Red Cap
B1 1023 Existing triangular signs on columns
2
SL.001 [Side A]5
[Side B]5
B1 1024 Existing triangular signs on columns
2
SL.001 [Side A](Restroom Symbol)
[Side B](Restroom Symbol)
B1 1025 Existing triangular signs on columns
2
SL.001 [Side A]7
[Side B]7
B1 1026 Existing triangular signs on columns
2
SL.001 [Side A](Customer Service Symbol)Amtrak
[Side B](Customer Service Symbol)Amtrak
B1 1027 Existing triangular signs on columns
2
SL.001 [Side A]9
[Side B]9
B1 1028 Existing triangular signs on columns
2
SL.001 [Side A](SEPTA Regional Rail Symbol)
[Side B](Car Rental Symbol)
[Side A Alt.](SEPTA Symbol)SEPTA
B1 1029 Existing triangular signs on columns
2
Page 3
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.001 [Side A](Blank - no text or symbol)
[Side B](SEPTA Symbol)SEPTA
[Side B Alt.](Subway Symbol)(Trolley Symbol)SEPTA
B1 1030 Existing triangular signs on columns
2
SL.001 30th StreetB2 1031 Station entrance door transom signs
1
SL.001 Taxis (Alt. University City)B2 1032 Station entrance door transom signs
1
SL.001 30th Street (Alt. University City or Taxis)
B2 1033 Station entrance door transom signs
1
SL.001 Taxis (Alt. University City)B2 1034 Station entrance door transom signs
1
SL.001 30th StreetB2 1035 Station entrance door transom signs
1
SL.002 [Side A]Train Information(Train Information Screen)(Amtrak Logo)
[Side B]Train Information(Train Information Screen)(Amtrak Logo)
E 1036 Kiosks for Arrivals/Departures information
2
SL.002 Main Concourse (Vertical Rule) (SEPTA Regional Rail Symbol) SEPTA
B3 1037 Existing rectangular soffitsigns between columns
1
SL.002 (SEPTA Subway Symbol)(SEPTA Trolley Symbol)(Bus Symbol)SEPTA
B3 1038 Existing rectangular soffitsigns between columns
1
SL.002 (Tenant Name)B3 1039 Existing rectangular soffitsigns between columns
1
SL.002 Gate 10B4 1040 Gate ID wall sign1
SL.002 (Tenant Name)B3 1041 Existing rectangular soffitsigns between columns
1
SL.002 (Tenant Name)B3 1042 Existing rectangular soffitsigns between columns
1
SL.002 Gate 8B4 1043 Gate ID wall sign1
SL.002 (Tenant Name)B3 1044 Existing rectangular soffitsigns between columns
1
SL.002 (Food Court Symbol)Food Court
B3 1045 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 5 & 6B3 1046 Existing rectangular soffitsigns between columns
1
SL.002 Gate 6B4 1047 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 5 & 6B3 1048 Existing rectangular soffitsigns between columns
1
SL.002 (Food Court Symbol)Food Court
B3 1049 Existing rectangular soffitsigns between columns
1
SL.002 (Tenant Name)B3 1050 Existing rectangular soffitsigns between columns
1
Page 4
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.006
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.002 Gate 4B4 1051 Gate ID wall sign1
SL.002 (Tenant Name)B3 1052 Existing rectangular soffitsigns between columns
1
SL.002 (Tenant Name)B3 1053 Existing rectangular soffitsigns between columns
1
SL.002 Gate 2B4 1054 Gate ID wall sign1
SL.002 (Tenant Name)B3 1055 Existing rectangular soffitsigns between columns
1
SL.002 Gate 1B4 1056 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 1 & 2B3 1057 Existing rectangular soffitsigns between columns
1
SL.002 (Tickets Symbol) Amtrak TicketsB3 1058 Existing rectangular soffitsigns between columns
1
SL.002 (Tickets Symbol) Amtrak TicketsB3 1059 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 3 & 4B3 1060 Existing rectangular soffitsigns between columns
1
SL.002 Gate 3B4 1061 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 3 & 4B3 1062 Existing rectangular soffitsigns between columns
1
SL.002 (Tickets Symbol) Amtrak TicketsB3 1063 Existing rectangular soffitsigns between columns
1
SL.002 (Tickets Symbol) Amtrak TicketsB3 1064 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 5 & 6B3 1065 Existing rectangular soffitsigns between columns
1
SL.002 Gate 3B4 1066 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 5 & 6B3 1067 Existing rectangular soffitsigns between columns
1
SL.002 (Restroom Symbol) RestroomsB3 1068 Existing rectangular soffitsigns between columns
1
SL.002 (Restroom Symbol) RestroomsB3 1069 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 7 & 8B3 1070 Existing rectangular soffitsigns between columns
1
SL.002 Gate 7B4 1071 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 7 & 8B3 1072 Existing rectangular soffitsigns between columns
1
SL.002 Amtrak Customer ServiceB3 1073 Existing rectangular soffitsigns between columns
1
SL.002 Amtrak Customer ServiceB3 1074 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 9 & 10B3 1075 Existing rectangular soffitsigns between columns
1
SL.002 Gate 9B4 1076 Gate ID wall sign1
SL.002 Main Concourse (Vertical Rule) Gates 9 & 10B3 1077 Existing rectangular soffitsigns between columns
1
Page 5
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.002 (Car Rental Symbol) Car RentalB3 1078 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) (SEPTA Trolley Symbol) (SEPTA Subway Symbol) (SEPTA Bus Symbol) SEPTA
B3 1079 Existing rectangular soffitsigns between columns
1
SL.002 (SEPTA Regional Rail Symbol) SEPTAB3 1080 Existing rectangular soffitsigns between columns
1
SL.002 Main Concourse (Vertical Rule) Gates 1 & 2B3 1133 Existing rectangular soffitsigns between columns
1
SL.002 Baggage/TicketsB3 1134 Existing rectangular soffitsigns between columns
1
SL.003 30th Street StationM 1081 Exterior station ID1
SL.003 Directory(Map)
D 1082 Map/directory signs1
SL.003 [Side A]Visitor Information(Map)
[Side B]Visitor Information(Map)
G 1083 Kiosks for visitor information
1
SL.003 30th Street StationM 1084 Exterior station ID1
SL.003 Directory(Map)
D 1085 Map/directory signs1
SL.003 [Side A]Gate 2(PIDS Screen)(Amtrak Logo)
[Side B]Gate 2(PIDS Screen)(Amtrak Logo)
F 1086 Freestanding gate ID signs in the Main Concourse
2
SL.003 [Side A]Gate 1(PIDS Screen)(Amtrak Logo)
[Side B]Gate 1(PIDS Screen)(Amtrak Logo)
F 1087 Freestanding gate ID signs in the Main Concourse
2
SL.003 [Side A]Gate 3(PIDS Screen)(Amtrak Logo)
[Side B]Gate 3(PIDS Screen)(Amtrak Logo)
F 1088 Freestanding gate ID signs in the Main Concourse
2
SL.003 [Side A]Gate 5(PIDS Screen)(Amtrak Logo)
[Side B]Gate 5(PIDS Screen)(Amtrak Logo)
F 1089 Freestanding gate ID signs in the Main Concourse
2
SL.003 Directory(Map)
D 1090 Map/directory signs1
Page 6
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.007
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.003 [Side A]Gate 7(PIDS Screen)(Amtrak Logo)
[Side B]Gate 7(PIDS Screen)(Amtrak Logo)
F 1091 Freestanding gate ID signs in the Main Concourse
2
SL.003 [Side A]Gate 9(PIDS Screen)(Amtrak Logo)
[Side B]Gate 9(PIDS Screen)(Amtrak Logo)
F 1092 Freestanding gate ID signs in the Main Concourse
2
SL.003 [Side A]Visitor Information(Map)
[Side B]Visitor Information(Map)
G 1093 Kiosks for visitor information
2
SL.003 Directory(Map)
D 1094 Map/directory signs1
SL.003 [Side A]Gate 4(PIDS Screen)
[Side B]Gate 4(PIDS Screen)
F 1132 Freestanding gate ID signs in the Main Concourse
2
SL.004 [Side A](Up Arrow) (Amtrak Train Symbol) Amtrak(SEPTA Regional Rail Symbol) SEPTARegional Rail
[Side B](Up Arrow) (Bus Symbol) BusLUCY(Left Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}
P 1095 Exterior pedestrian directional sign
2
SL.004 [Side A](Up Arrow) (Bus Symbol) Buses{Bus Numbers TBD}
(Up Left Arrow)(Amtrak Train Symbol) Amtrak
[Side B](Up Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}
(Up Right Arrow) (Bus Symbol) BusLUCY
P 1096 Exterior pedestrian directional sign
2
Page 7
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.004 30th StreetB2 1097 Station entrance door transom signs
1
SL.004 Market StreetB2 1098 Station entrance door transom signs
1
SL.004 [Side A]Train Information(Train Information Screen)(Amtrak Logo)
[Side B]Train Information(Train Information Screen)(Amtrak Logo)
E 1099 Kiosks for Arrivals/Departures information
2
SL.004 [Side A](Up Arrow) Main Concourse(Tickets Symbol) Amtrak Tickets(SEPTA Regional Rail Symbol) SEPTA
(Right Arrow) (Male/Female Restroom Symbol) Restrooms
[Side B](Up Arrow)(SEPTA Subway Symbol) SEPTA(SEPTA Trolley Symbol) SEPTA(Bus Symbol) BusesMarket Street
(Left Arrow) (Male/Female Restroom Symbol) Restrooms
A3 1100 Overhead directional sign2
SL.004 Market StreetB2 1101 Station entrance door transom signs
1
SL.004 [Side A](Up Arrow) Main Concourse(Left Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}(Right Arrow) (Bus Symbol) Buses{Bus Numbers TBD}(Tickets Symbol) Amtrak Tickets
[Side B](Up Arrow)Market Street
(Right Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD}
(Left Arrow)(Bus Symbol) Buses{Bus Numbers TBD}
A2 1102 Small freestanding directional sign
2
SL.004 Market StreetB2 1103 Station entrance door transom signs
1
SL.004 Market StreetB2 1104 Station entrance door transom signs
1
SL.004 29th StreetB2 1105 Station entrance door transom signs
1
Page 8
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.008
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.004 [Side A](Up Arrow) (Bus Symbol) Buses{Bus Numbers TBD}Center City
[Side B](Right Arrow) (Amtrak Train Symbol) Amtrak(SEPTA Regional Rail Symbol) SEPTARegional Rail
(Up Arrow) (SEPTA Subway Symbol) SEPTAMarket-Frankford Line(SEPTA Trolley Symbol) SEPTATrolley Lines(Bus Symbol) Buses{Bus Numbers TBD} LUCY
P 1106 Exterior pedestrian directional sign
2
SL.004 [Side A](Right Arrow) (Bus Symbol) Buses{Bus Numbers TBD}
[Side B](Up Arrow) (Amtrak Train Symbol) Amtrak(SEPTA Regional Rail Symbol) SEPTARegional Rail
May delete or change location andmessage
P 1107 Exterior pedestrian directional sign
2
SL.004 StorageB2 1108 Amtrak service counter ordoor transom signs
1
SL.004 ExpressB2 1109 Amtrak service counter ordoor transom signs
1
SL.004 BaggageB2 1110 Amtrak service counter ordoor transom signs
1
SL.004 29th StreetB2 1111 Station entrance door transom signs
1
SL.004 [Side A](Up Arrow) (Club Acela Symbol) Club Acela(Left Arrow) (SEPTA Regional Rail Symbol) SEPTA(Restroom Symbol) Restrooms
[Side B](Up Arrow) Main Concourse(Right Arrow) (SEPTA Regional Rail Symbol) SEPTA(Left Arrow) (Taxi Symbol) Taxis
A3 1112 Overhead directional sign2
SL.004 (Up/Right Arrow) (Women Restroom Symbol) WomenB2 1113 Transom signs1
SL.004 (Up Arrow) (Amtrak Train Symbol) AmtrakMain Concourse
B2 1114 Tansom signs1
SL.004 [Side A](Up Arrow) (Women Restroom Symbol) Women
[Side B](Up Arrow) (Men Restroom Symbol) Men
May delete or change location andmessage
B2 1115 1
SL.004 [Side A]Train Information(Train Information Screen)(Amtrak Logo)
[Side B]Train Information(Train Information Screen)(Amtrak Logo)
E 1116 Kiosks for Arrivals/Departures information
2
Page 9
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.004 [Left Side](Left Arrow) (Men Restroom Symbol) Men
[Right Side](Up Arrow) Valet Parking
B2 1117 Station entrance door transom signs
1
SL.004 (Up Arrow) (Amtrak Train Symbol) AmtrakMain Concourse
B2 1118 Station entrance door transom signs
1
SL.004 [Side A][Left Side](Up Arrow) Amtrak Police(SEPTA Regional Rail Symbol) SEPTARegional Rail
[Right Side](Right Arrow) (Men Restroom Symbol) Men
[Side B]Blank
May omit or change location and message
B2 1119 Station entrance door transom signs
1
SL.004 [Side A](Up Arrow) (Male/Female Restroom Symbol) Restrooms(Left Arrow) (SEPTA Regional Rail Symbol) SEPTA(Right Arrow) Baggage Claim
[Side B](Up Arrow) Main Concourse(Right Arrow) (SEPTA Regional Rail Symbol) SEPTA(Left Arrow) Baggage Claim
A3 1120 Overhead directional sign2
SL.004 [Side A](Up Arrow) (SEPTA Regional Rail Symbol) SEPTAParkingCira Center
[Side B](Up Arrow) Main Concourse(SEPTA Subway Symbol) (SEPTA Trolley Symbol) SEPTA(Bus Symbol) Buses(Left Arrow) (Ticket Symbol) Amtrak Tickets
A3 1121 Overhead directional sign2
SL.004 [Side A]Visitor Information(Map)
[Side B]Visitor Information(Map)
G 1122 Kiosks for visitor information
1
SL.004 [Left Side](Left Arrow) (Handicap Symbol) (Elevator Symbol) Elevator(Left Arrow) (Stair Symbol) Tracks 3 & 4
[Right Side](Escalator Symbol) Tracks 3 & 4 (Right Arrow)
N 1123 SEPTA concourse directional sign
1
SL.004 [Left Side](Up Arrow) Main Concourse(Left Arrow) (Escalator Symbol) Tracks 3 & 4
[Right Side](Handicap Symbol) (Elevator Symbol) Elevator (Right Arrow)(Stair Symbol) Tracks 3 & 4 (Right Arrow)
N 1124 SEPTA concourse directional sign
1
SL.004 [Left Side](Left Arrow) (Handicap Symbol) (Elevator Symbol) Elevator(Left Arrow) (Stair Symbol) Tracks 5 & 6
[Right Side](Escalator Symbol) Tracks 5 & 6 (Right Arrow)
N 1125 SEPTA concourse directional sign
1
Page 10
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.009
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule
Sign # Message RemarksPlanSignType Qty DescriptionSides
SL.004 [Left Side](Up Arrow) Main Concourse(Amtrak Train Symbol) Amtrak(Left Arrow) (Escalator Symbol) Tracks 5 & 6
[Right Side](Handicap Symbol) (Elevator Symbol) Elevator (Right Arrow)(Stair Symbol) Tracks 5 & 6 (Right Arrow)
N 1126 SEPTA concourse directional sign
1
SL.004 30th StreetB2 1127 Station entrance door transom signs
1
SL.004 [Left Side](Up Arrow) (Ticket Symbol) SEPTA Tickets(Left Arrow) (Handicap Symbol) (Elevator Symbol) Elevator(Left Arrow) (Stair Symbol) Tracks 1 & 2
[Right Side](Escalator Symbol) Tracks 1 & 2 (Right Arrow)
N 1128 SEPTA concourse directional sign
1
SL.004 [Left Side](Up Arrow) Main Concourse(Amtrak Train Symbol) Amtrak(Left Arrow) (Escalator Symbol) Tracks 1 & 2
[Right Side](Handicap Symbol) (Elevator Symbol) Elevator (Right Arrow)(Stair Symbol) Tracks 1 & 2 (Right Arrow)
N 1129 SEPTA concourse directional sign
1
SL.004 30th StreetB2 1130 Station entrance door transom signs
1
SL.004 [Side A](Up Arrow) (SEPTA Regional Rail Symbol) SEPTA(Parking Symbol) ParkingCira Center
[Side B](Up Arrow) Main Concourse(SEPTA Subway Symbol) (SEPTA Trolley Symbol) SEPTA(Bus Symbol) Buses(Up Arrow) (Ticket Symbol) Amtrak Tickets
A3 1131 Overhead directional sign2
Page 11
June 17, 2010
Message Schedule
0809 30th Street Station
Calori & Vanden-Eynden / Design Consultants
Calor i & Vanden-Eynden/Design Consultants
© Calori & Vanden-Eynden, Ltd. All ideas, designs, arrangements, and plans indicated by this drawing are owned by and the property of the designer and shall not be used by or disclosed to any person, firm, or corporation without the written permission of the designer.
Notes:
Project30th Street StationIntermodal Signage
Title
Date 20 August 2010
Scale As Shown
Drawn KC, GW
Job No. 0809
Sheet SL.0010
Revisions
No. Description Date
Issued for final review 6/04/12
FOR REVIEW ONLY - NOT FOR CONSTRUCTION
1. Fabricator to verify all dimensions and field conditions.
2. Fabricator to remove any existing signs and to replace with new signs.
3. Fabricator to engineer all sign connections to Amtrak Specifications.
4. Text and symbols shown on signs are for visualization only.
5. Clear coat all painted surfaces with Matthews VOC Satin Clear #281228 coating.
Sign Message Schedule