3344299 sap solution manager guide to plug system using longsid

Working with the Landscape How-To Create and plug LongSID System in Solution Manager

08Fall

SAP Solution Manager

h t t p : / / w w w . l i n k e d i n . c o m / i n / s o l u t i o n m a n a g e r W e n c e s l a o L a c a z eW e n c e s l a o L a c a z e

Sap Solution Manager – Working with the Landscape

Table of ContentsVersioning .................................................................................................................. 4 Author Bio ................................................................................................................. 4 Purpose ..................................................................................................................... 5

Solution Manager – Scenario Description ............................................................... 5 Requirements ............................................................................................................ 7 Satellite ..................................................................................................................... 8

Service package and Support Package .................................................................. 8 SLD Configuration ................................................................................................. 8 Satellite Task (Abap): .............................................................................................. 9 Satellite Task (Java): ............................................................................................... 9 Satellite Task (Other): ............................................................................................. 9 Check the Systems in SLD .................................................................................... 11

Solution Manager: ................................................................................................... 12 Create the System ................................................................................................ 12

Create DB .......................................................................................................... 12 Create The Sap System ..................................................................................... 12 Create the Java System ..................................................................................... 12

Match the Smsy-SLD ............................................................................................ 12 Assign the Right Components .............................................................................. 13 MAP Component Abap/Java .................................................................................. 13 Assign the Installation Number ............................................................................ 13

RFC Connection ....................................................................................................... 14 Read Destination ............................................................................................... 14 TMW Destination ............................................................................................... 14 Trusted Destination ........................................................................................... 14 Back Destination ............................................................................................... 15 Load Balance and Monitoring ............................................................................ 15

Create the Logical Component ............................................................................. 15 Logical Component for ABAP Components ........................................................ 16 Logical Component for JAVA Components ......................................................... 16

Assign the Logical Component to the Solution .................................................... 16 Install SMD Agent .................................................................................................... 18 Dbacockpit ............................................................................................................. 21 Jdbc Connector ........................................................................................................ 23 Remote DB Monitoring ............................................................................................ 24 Scheduler-Run task .................................................................................................. 25 SMD Setup Wizard ................................................................................................... 26 Introscope Agent ..................................................................................................... 28 EWA ......................................................................................................................... 30

Check the EWA Service Status in SMD ................................................................. 30 Configure EWA Service in Solution Manager ....................................................... 30 Check the RCTOOL In the Satellite ...................................................................... 32 Check the EWA Service in SM ............................................................................... 35 Check the SDCCN Data ....................................................................................... 36 Check the Status of the EWA Session .................................................................. 37

3633756.doc of 41


Extras ...................................................................................................................... 39 Check FDQN active ........................................................................................... 39 Check the FQDN Defined. .................................................................................. 39 Check Java environment Ports .......................................................................... 40

3633756.doc of 41


VersioningVersion Change Date

1.0 Original 10/06/20082.0 Webpage Link

SLD for External systems.23/06/2008

Author BioMy name is Wenceslao Lacaze and I’ve been working as a SAP basis Administrator and Solution Manager Consultant for the last 8 years.I’m a Techno-Functional SAP Solution Manager Subject Matter Expert (SME), I Design, Build and Implement the product using “Run Sap” Methodology. I have developed a very extended experience with medium and large scaled SAP installations in several (multi)national environments.

I am based in Argentina, but work all around the World.I work directly for clients or via an agency.I do speak Spanish, Italian and English fluently.You can contact me at:Email: [email protected]://www.linkedin.com/in/solutionmanager

You can found more papers at : http://wlacaze.googlepages.com/home

3633756.doc of 41

http://wlacaze.googlepages.com/home

http://www.linkedin.com/in/solutionmanager

mailto:[email protected]


PurposeThis configuration guide has been compiled to know how connect the Satellite system to SAP Solution Manager.

Solution Manager – Scenario DescriptionYou have installed and configured the SAP Solution Manager but not yet plugged the Satellites Systems..To plug the Satellite, you need to complete a number of steps. You begin by activating the SLD in SAP Solution Manager. Next, you configure and connect the satellite. In the third and final step, you activate the SMD functions to use EWA – Non Abap Functionality.

Note: General information and instructions for SAP Solution Manager can be downloaded at:

http://service.sap.com/solutionmanager -> Installation Guides -> Release 4.0 ->

3633756.doc of 41

SolManSLD

SAPAbap/Java

RFC READ

RFC TMW

RFC

RFC BACK


Configuration Guide SAP Solution Manager

3633756.doc of 41


RequirementsTo use this tutorial you need:

Parameters DescriptionHostname and FQDN: <Hostname.domain.com>Ip Address: <192.168.1.1>OS W64 W32 AIXRemote Session Type RDP VNC X-Sessionroot or Administrator :User/Password

<root> <Password>

SAPOSS User: User/Password <S0000XXXX > <password>Installation Number <00000999999>Customer Number <0000099999>Sap Product/Version: ERP BI CRM OtherSystem type:

<ABAP> <JAVA><DualStack

>Master Password: provided during the installation

<PASSWORD>

ABAPSID: <SID>Sysnr: <SysNr>User for client 000: SAP* or similar

000<username

><password

>User for Prod. Client: SAP* or similar

<XXX><username

><password

>JAVA

SID: <SID>Instance number: <99>User: Administrator/J2ee_admin <J2eeadm> <password>SLDDSUSER PasswordInstallation Directory:

/usr/sap/<SID><X>:\usr\sap\<SI

D>Message Server Host: HostnameMessage Server Port: 39XX

3633756.doc of 41


SatelliteCheck the DNS Name resolution between the Satellite system and solution manager. Try to ping to the hostname and to the FQDN.Check the required service package are in the satellite systems (Menu: SystemStatus):

Service package and Support PackageCheck if the required service packages are in the satellite systems (menu: System -> Status):

ST-PI Version 2005_1_<release> and higher:

• get data for Solution Monitoring in the satellite systems using the RFC back connection from the satellite system to the Solution Manager.

• put PFCG roles from the satellite systems into project structures (from Add-On ST-PI Version 2005_1_<release>SP03)

SAP note 539977 contains the release strategy for ST-PI

ST-A/PI:

• ST-A/PI is required in the satellite to be able to deliver support services.

• See SAP note 560630 if your satellite systems do not satisfy the requirements

The ST-A/PI is in SAP note 69455.

ST-SER 700_2005_2 • relevant for service deliverywith SAP_BASIS from WebAS 7.00 SP05

SLD ConfigurationThere is 2 way to plug the Satellite to the SLD.If you are using SLD in Local (XI, Jco Destination, Portal, Etc) You need to Replicate/Synchronize the SLD Information between the SLD of the Satellite system to the SLD of Solution Manager.If you don’t use the SLD in Local, you can plug the Satellite direct to the SLD of Solution Manager.

3633756.doc of 41


IN THIS PAPER WE USE DIRECT CONNECTION BETTWENT THE SATELLITE TO THE SOLMAN SLD.

Satellite Task (Abap):RZ70Put the host and Service of Solution Manager ( If is not possible change because you use the SLD in Local speak with the System Administrator for SLD Data Replication).

Satellite Task (Java):VisualAdmin Server0ServicesSLD Data SupplierRuntimeHTTP Setting Tab: Put the right information and then click in the Transfer Button.

CIM Client Generation Settings Tab: Put the right information and then click in CIMClient Test to check the configuration

Satellite Task (Other):You can use SLD to upload external sap products too, You can use to publish TREX servers, MDM, Mobile or any kind of systems..You need to Install 2 commands, “sldreg”: Used to create the Registration file to connect to the SLD and the SapOsCol used to read all the technical information, you can found this files in the Kernel SP.cd /<Kernel Directory> or SYS directory.sldreg -configure slddest.cfg –usekeyfile.Complete:Username/PasswordSLD Host/Port/HTTPS

3633756.doc of 41


This procedure generate the slddest.cfg file with the connection information.

Check the SapOsColrun saposcol –b.You can check the Hardware Information in XML format.

Then you run the saposcol –b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd.The system showHTTP response: Success. HTTP status code: 200End SLD Registration

3633756.doc of 41


Data send status: true

Check the Systems in SLDIn the http://hostname:50000/SLD of solution Manager Check in Technical system if you see the information of the recent adds system (Check if the Last Update is correct).

3633756.doc of 41

http://hostname:50000/SLD


Solution Manager:We are using LongSID, This mean that we identify the satellite system with the normal SID and adding a Suffix. We need to create the System Manually and then synchronize with the SLD. If you use Normal SID you don’t need to create the system manually.

Create the System

Create DBIn the Txcode: SMSYIs important put the first 3 letter from the DB and the hostname, with this field Solution Manager map the LongSID with the SID.

Create The Sap SystemIs important put the first 3 letter from the sap system and the Installation Number, with this field Solution Manager map the LongSID with the SID.

Create the Java SystemIs important put the first 3 letter from the sap system, the hostname and the Installation Number, with this field Solution Manager map the LongSID with the SID.

Match the Smsy-SLDIn this step the Solution Manager read the SLD Information and match the Information with the Satellite system defined in the SMSY.Run SMSY_SETUP in “Test mode” Immediate

Wait until the process “LANDSCAPE FETCH” ends in SM37

Check in SMSY if the System was assigned in the right way. You can check if the

3633756.doc of 41


Data Source is SLD, this mind that the Solution manager maps the LongSID with the SID.

Assign the Right ComponentsIn this sample we are connecting a BI, This product is SAP Netweaver 2004S Business Intelligence

MAP Component Abap/JavaIn this sample we create the System DI3_042,(Java Stack of NW2004s BI)

We select the BI Java like relevant component and the system component DI3_042 (Java Component)

Assign the Installation NumberCheck if the installation number is correct in all the Sap System. This is important because if you don’t have the Installation Number the system cannot send the Information to SMD.

3633756.doc of 41


RFC ConnectionThe RFC Allow to the Satellite to make and read the Satellite Information from the Solution Manager.You can use the Wizard to create the RFC in Automatic. Prerequisite:Admin user in the Solution Manager Admin User in the Satellite System.S_RFC and S_RFCACL Authorization Object in the Satellite System..

To generate the RFC Connection we need to Select the Sap System Main Instance Client row: click in the Generate Button.

Read Destination

Rfc create the RFC Destination from Solution Manager to the Satellite named: SM_<SID>CLNT<NRO>_READ

User Create the User SOLMANP1M100 in the Satellite with authorization only for read.

Used for:

This RFC is used for read system tables and statistics

TMW Destination

Rfc Create the RFC Destination in Solution Manager SM_<SID>CLNT<NRO>_TMW

User Create the User SOLTMWP1M100 in the Satellite with the authorization to create and release transport.

Used for:

This RFC is used with the Change Management Functionality

Trusted Destination

Rfc Create the RFC Destination in Solution manager

3633756.doc of 41


SM_<SID>CLNT<NRO>_TRUSTEDUser: Use the “Current User” Authorization with Trusted authorization, (In

the Satellite you need to have the profile S_RFC,S_RFC_ACL)User for:

This RFC Is used with different scenarios.

Back Destination

Rfc Create the RFC Destination in Satellite pointing to Solution Manager, SM_<SolMan SID>CLNT<NRO>_BACK

User: Create the User SOLMANDI2042 in Solution Manager with SDCCN Authorization.

User for:

This RFC is Used in the SDCCN Functionality, this allow the satellite system to send EWA to Solution Manager.

Load Balance and MonitoringThis Allow to use Load Balancing in the RFC Destinations and Select the RFC For Monitoring

Create the Logical ComponentThe Logical Component is used by Solution Manager to map the “Functionality of the System – Development-Productive-Quality-Sandbox” to the Landscape of the solution. You need to create 1 Logical component for every Main Instance in your Solution, Go to SMSY the menu --> Other Object…

Select Logical component and button Create

3633756.doc of 41


Logical Component for ABAP ComponentsWrite the Logical Component Name and select the Product/Version/Main Instance.

In the Logical Component Main window assign the role to the system.

Logical Component for JAVA ComponentsWrite the Logical Component and select the Main Instance.

Assign the Role to the System

Assign the Logical Component to the Solution All the Logical Component need to be mapped to the Solution. Is important to define the right Leading Role of your Solution, this information is used in the BPM Txcode: DSWP

3633756.doc of 41


Select the Solution Solution Landscape Solution Landscape Maintenance

Select the Logical Component and Save.

3633756.doc of 41


Install SMD AgentThe SMD Agent is a Java Product created by Sap to Read/Compare/Execute remote task in the Satellite system. You need to install only one SMD Agent/Instance for Server/Virtual Server.

Download the Last Version of the SMD Agent from:Service.sap.com/swdc DownloadInstallations and UpgradesEntry By Appllications GroupSap Technology ComponentsSap Solution ManagerSap Solution Manager 7Sap Solution Manager DiagnosticsSMD Agent 7.00<Platform>

Uncompress and run the Sapinst with root/Administrator user.

SMD Agent Install Next.

Select the Username and password for SMD Agent (default: smdadm) , Local or Virtual host and if the SMD User is Local or Windows Domain.

Identify the Server name if is necessary (default: blank)

3633756.doc of 41


Select the connection Type (default: HTTP)

Put the Hostname and Http Port of Solution Manager and Username/Password for Administrative role.

Select Next. Select Start.

The System End the installation ok.

3633756.doc of 41


Now you can see the New SMD Instance in Management Console

You can check in SMD if you see the Agent connected.http://solman_hostname:50000/smd Diagnostics Administration Managed Systems Agent Administration You can see the Agent ampsv04203pjt without server name.

3633756.doc of 41


Dbacockpit The Dbacockpit is the tool provided by sap to control the entire databases in the Sap Landscape.We make the connection to check if Solution Manager can see the Satellite Database without errors.

Txcode: DBACOCKPIT for check the DB connection parameter.Click in SLD System Import Button.

Select and the Systems and click in Import Button

In the Main Window select the system and click in Edit

Select the Database Connection and click in Details

Complete the Database Parameter, User Password and TNS name and Save. (Remember to put the TNS Profile in the file H:\usr\sap\P2M\SYS\profile\oracle\tnsnames.ora)

3633756.doc of 41


Now you can click in the Left icon to activate or deactivate the connection.

3633756.doc of 41


Jdbc ConnectorJDBC Connector allow to Solution Manager Diagnostics to connect to the remote database and read the technical Information.

In Solution Manager (Java) Diagnostics SetupManaged System

TroubleshootingJDBC ConnectivitySelect the System and complete the connection parameters.

3633756.doc of 41


Remote DB MonitoringIn Solution Manager Diagnostics SetupManaged System TroubleshootingSelect DB and SID

Complete the Database Connection information and Click in Add and Test DB.

The Connectivity test is Ok

3633756.doc of 41


Scheduler-Run taskThe Scheduler is the Key point of Solution Manager Diagnostics. In the scheduler we define the task to do in all the Satellite system. Some task has the availability to run on demand or scheduled every hour/Day. We need to force the first scheduler task to load the parameters in Solution Manager.

Solution Manager (Java)Diagnostics AdministrationManaged SystemsSchedulerHost ListSelect your server and run the task one by one to check is everything is correct.

3633756.doc of 41


SMD Setup WizardThe SMD Setup Wizard allows to make the connection from SMD to the Satellite. Technically, is map the Satellite System (SMD Agent) to one Solution. During the Setup we put the Administrator User to allow to Solution Manager to make some changes in the Satellite.

In Solution Manager (Java) Diagnostics Setup Managed Systems Setup Wizard.Select the Solution and click Next.

Select the Sap system and Next

Complete the Java Connect Parameters set the Agent.Open the Drop box (1) Select the Agent(2) and the Installation Path and then click in Set.

3633756.doc of 41


Wait until the Agent restart and then Click in Next..

Solman show all the task to execute. Select all and click Next.

When the task end you can see the log and quit.

3633756.doc of 41


Introscope AgentThe Introscope Agent collects the information and statistics from the Sap System and process the information to compile the Early Watch Alert. The Introscope allow to monitor and see the information in real time.You need to perform the installation of Introscope Agent in all the J2ee Nodes/ServerX in the Satellite.Prerequisite: SMD Agent runningSetup Wizard already done.

In Solution Manager (Java) Diagnostics Setup Managed Systems Introscope Agent.Select the System in the Drop Box. In the list of J2ee Node select a new ServerX (The flag green mean that is ready to plug)Click in Setup Introscope Agent.

Select the Version/Profile(Actually is only 2 profile: XI and other) and Apply.

You need to restart the Java Instance of the Satellite system to activate the ISA in SMD.The you can see the ISAgent is state running.

3633756.doc of 41


3633756.doc of 41


EWA

Check the EWA Service Status in SMDTo check if SMD can create the EWA you can use the SMD/Service http://<solman_hostname>:50000/smd/servicesSelect the System and the service Type (EWAEXT)

Check if everything is Ok and Green Light..

If you have problems you can check the note:Note 976054 - Availability of EWA for Non ABAP components

Configure EWA Service in Solution Manager In Solution Manager you control all the EWA of the Satellite System. You can create and schedule EWA for all the systems (In the past sap only provide EWA for productive system).This configuration is done in automatic way when you add the Satellite System to some Solution, but if you want to check or create manually you can use this procedure.Txcode: SMSYEnvironment Solution Manager Operations Administration SDCCN

3633756.doc of 41


In this screen you can check, Activate and Assign Sap Solution Manager like the Master System.

If is not in the List you can add manually

3633756.doc of 41


When you add one system you need to Assign the Master System and check the connectivity between Solution Manager and the Satellite System.

Select the row of the Satellite System and selectMaster System Assign as Master System

Then you need to Activate the SDCCN in the Satellite system clicking in the Icon Activate.

Check the RCTOOL In the Satellite Run the Txcode: SMSYEnvironmentSolution Manager operationsAdministration SDCCN

3633756.doc of 41


Select the System to check and click in the run Icon

In the Service Data Control Center Click in New and Add the Task “Service Preparation Check”

Clicik in Ok

3633756.doc of 41


Edit Start now

Check if everything is correct

Refresh the Service Definition:Click in New Task and select the ‘Refresh Session” Task.

3633756.doc of 41


Select Now and the Solution Manager like Target RFC Destination.

Now you can see the Service Session Waiting to run

Check the EWA Service in SMYou can control the Status of all the EWA in your Solution ManagerTxcode: DSWPSettingsSolution MonitoringEarly watch Alert

3633756.doc of 41


In the Screen you can see all the EWA Generated and Activate, Send to Sap or change the Running Day or Retention Period.

Check the SDCCN Data You can check the Status of the SDDCN Data (This is all the data used to generate the EWA) using Solution Manager..

Txcode: DSWPGotoSessionsSDCCN Data

In the Screen you can see the status of all the SDCCN Data for the EWAS.

3633756.doc of 41


Check the Status of the EWA Session You can check the Status of all the EWA Session in Solution Manager, this allow to see if the Session was generated or not.Txcode DSWPGotoSessionsOverview

Select your filter options and run

3633756.doc of 41


You see all the Session information

If you want to open it, you can click in the Session number and the session will be

opened

3633756.doc of 41


Extras

Check FDQN activeTxcode: SMICM

Click in Services

Check the FQDN Defined.Txcode:RZ11 Parameter “icm/host_name_full”

Check the Current Vaule

3633756.doc of 41


Check Message Server InformationGoto:http://< Server Hostname>:5<Synr>00/sap/monitoring/systemifno

Check Java environment PortsGoto: http://<message Server Hostname>:81<Synr>/msgserver/text/logon

3633756.doc of 41


Check Abap PortsGoto:http://<message Server Hostname>:80<Synr>/msgserver/text/logon

3633756.doc of 41

3344299 sap solution manager guide to plug system using longsid

Documents

nce sl ao

solution manager

sap solution

ewa service

solution manager

main instance

logical component

sap system