352'8&7 *8,'( - hydair drives2-15 lpm, 1/2” spt female swivel brass ports. h627-007....

PRODUCT GUIDE 2016Your first choice for Industrial Instruments

Company

2

Dear Customer

Welcome to the new edition of our Product Catalogue 2016, GTS Gauges Transmitters

Switches Pty Ltd is your first choice for Industrial Instrumentation, with a large range of

stock in Australia. With over 10 years experience, GTS can assist with supplying the correct

instrument for your requirements. Whether it is off our shelf or custom made, GTS can meet

your needs.

GTS works to offer you the best services with the best products available in the market.

Product Line:

Pressure: Pressure Gauges, Pressure Switches, Pressure Transmitters/Transducers, Digital

Pressure Gauges and Pressure Test Kits.

Temperature: Temperature Gauges, Temperature Switches and Temperature Transmitters/

Transducers.

Force: Force Transducer with Strain Gauge, Force Transducer with Thin-Film Impact

Hydraulic Force Transducers.

Level: Float Level Switches, Mechanical Level Gauges, Level Sensor, Level Senders and

Transmitters.

Tachometers: Handheld Mechanical Tachometers.

Flowmeters: Flow Transmitters, Flow Switches, Flow Test Kits, Variable Area, Ultrasonic,

Turbine, Mag Flow, Impeller.

Chart Recorders: Strip Recorder, 6”, 9” & 12” Model Light Weight.

Gas Detectors: Four gas and single gas personal monitor.

GTS can also provide our customers with calibration of pressure gauges to achieve customer

satisfaction.

GTS will always strive to offer you the best service with the best products we can source.

After all, it is all about the service to our customers.

We look forward to you next enquiry.

Best Regards,

Greg Rankine

Director

Index

3

FLOW METERS

6 & 7 Variable Area Flow Meter

8 Turbine Flow Meter

9 Portable Hydraulic Tester

10 Ultrasonic Flow Meter-Doppler: Models UFX & DFX

11 Ultrasonic Flow Meter-Transit Time: Models TFXL & TFX Ultra

12 Ultrasonic Flow Meter Model E-Series

13 Ultrasonic Test Kits

LEVEL GAUGES & SWITCHES

14 Mechanical Level Gauges

15 Fuel Level Sensor-Ohms Output

16 Fuel Level Sender-4-20mA Output

17 Vertical Float Switches-Custom Made & Bund Leak Monitors

18 Float Switches

19 Level Gauge and Senders

20 Engine Monitoring

PRESSURE GAUGES

23 & 24 40, 50, 63 mm Pressure Gauges

25 Medical & Capsule Gauges

26 & 27 63 mm Heavy Duty Pressure Gauges: Models P1454 & P1453

28 & 29 100 mm Heavy Duty Pressure Gauges: Models P1778 & P1779

30 & 31 63 mm All S/S Heavy Duty Pressure Gauges: Models P2032 & P2033

32 & 33 100 mm All S/S Heavy Duty Pressure Gauges: Models P2325 & P2329

34 160 mm Bottom Entry All 316 S/S Pressure Gauges: Model P2316

GAS PERSONAL MONITOR

5 Gas Personal Monitor: Four Gas Model GX-2009 & Single Gas Personal Monitor

21 Hand Held Tachometers

HAND HELD TACHOMETERS

CHART RECORDERS

22 Chart Recorder 6”, 9”,12” & Strip Recorder: HC2011

Index

4

FORCE

42 Load Cells, Tension & Compression Products

PRESSURE TRANSMITTERS

43 Digital Pressure Switches

44 & 45 Pressure Switches: Engine & Hydraulic

46 & 47 Pressure Transmitters: Models P3251, P3297 & P3278

48 Pressure Transmitters: Bluetooth

TEMPERATURE

49 Temperature Switches

50 Temperature Transmitters : Model TEU11 & ’V’ Shaped Machine Thermometers

51 Bimetal Temperature Gauges

38 Pressure Gauges Accessories

39 100 mm Dials: Single Scale, Bar & kPa and Dual

40 Gauges, Adapters & Pointers

41 Syphon, Snubbers, Cooling Towers & Diaphragm Seals

ACCESSORIES

BEARING OIL SEPARATOR

48 Bearing Oil Separator Sight Glass

35 Safety Pattern Pressure Gauges: Models P2113 & P2119

36 Digital Pressure Gauges: Models P3961 & P3962

37 Test Kits Digital & Analogue

Gas Personal Monitor

5

Gas Personal Monitor by RKI Instruments ®

Four or single gas, personal monitors represent the latest evolutions of gas detection technology. Advancements include

dual audible alarm ports and alarm LED’s on 3 sides of the instruments, so that alarm conditions are obvious from

multiple perspectives, especially in high noise environments.

Other features include a waterproof and dustproof design with IP67 rating, an impact resistant rubber over-mold body

that is RFI resistant, and a large capacity data logging system included as a standard feature.

C0-03 Carbon Monoxide (CO), electrochemical

Detection range: 0-500ppm (1ppm).

Alarm set points: 1st 30ppm, 2nd 60ppm, TWA 30ppm, STEL 60ppm, over 300ppm.

Response time: T90 in 30 seconds.

HS-03 Hydrogen Sulphide (H25), electrochemical

Detection range: 0-100ppm (0.5ppm).

Alarm set points: 1st 10.0ppm, 2nd 15.0ppm, TWA 10.0ppm, STEL 15.0ppm, over 100.0ppm.


OX-03 Oxygen (O2), galvanic cell

Detection range: 0-40% vol. (0.1% vol.).

Alarm set points: low 19.5% vol., high 23.5% vol., over 40.0% vol.


GP-03 Combustible gas, catalytic combustion

Detection range: 0-100% LEL.

Alarm set points: 1st 10% LEL, 2nd 15% LEL, over 100% LEL.


Four Gas Personal Monitor: GX -2009

Simultaneous detection of 4 gases LEL, O2, H2S & CO.

70 H x 70W x 25D mm, approx. 130 grams.

Dual audible alarm ports (95db@30cm).

3 visual alarm LED’s.

Vibration alarm.

IP 67 waterproof/ dustproof design.

20 hours of operation (NiMH batteries).

Large LCD display screen.

Single Gas Personal Monitors

Model Description

Flow

6

Model EZ - View VA Flow Meters for WATER - MAX PRESSURE

325psi/22.4bar

H627-004 2-15 LPM, 1/2” BSPT female swivel brass ports

H627-007 4-26 LPM, 1/2” BSPT female swivel brass ports

H630-010 4-35 LPM, 3/4” BSPT male swivel brass ports

H630-016-R 5-60 LPM, 3/4” BSPT male swivel brass ports

H616-025-R 10-95 LPM, 1-1/2” BSPP female brass ports

H616-050-R 20-190 LPM, 1-1/2” BSPP female brass ports

H618-075-R 30-280 LPM, 2” BSPP female brass ports

H618-010-R 40-380 LPM, 2” BSPP female brass ports

Model Variable Area Flow Meters for WATER - HIGH PRESSURE -

BRASS

H206B-020 1-7.5 LPM, brass, 1/4” BSPP, max press-3500 psi

H605B-005 2-19 LPM, brass, 1/2” NPT, max press-3500 psi

H606B-005 2-19 LPM, brass, 1/2” BSPP, max press-3500 psi



H756B-020 10-76 LPM, brass, 1” BSPP, max press-3500 psi


H856B-075 40-280 LPM, brass, 1-1/2” BSPP, max press-3500 psi



Low Cost Irrigation Variable Area Flow Meters by Hedland®

Hedland® Variable Area Flow Meters are the industry benchmark. These flow meters are constructed of aluminium,

brass or stainless steel with varying ranges for liquids, oil, water, compressed air and many other fluids and gases.

Hedland® VA meters are recommended for use in machine cooling and lubrication, packaging, semiconductor

production, high pressure and hose applications, automotive and aviation industry as well as in the mining industry.

Model Low Cost Irrigation Variable Area Flow Meters for

WATER - MAX PRESSURE 325psi/22.4bar

H621-007 4-26 LPM, 1” NPTF male, 1.0-7 GPM



H621-018 15-65 LPM, 1” NPTF male, 3.0 - 18 GPM

H621-028 20-100 LPM, 1”NPTF male, 4.0 - 28 GPM

Flow

7

Model Variable Area Flow Meters for OIL - HIGH PRESSURE -

ALUMINIUM

H202A-020 1-7.5 LPM, aluminium, 1/4” BSPP, max press-3500psi

H602A-005 2-19 LPM, aluminium, 1/2” BSPP, max press-3500psi



H762A-020 10-76 LPM, aluminium, 1”BSPP, max press-3500psi

H762A-040 15-150 LPM, aluminium, 1”BSPP, max press-3500psi

H802A-075 40-280 LPM, aluminium, 1-1/4”BSPP, max press-3500psi




BRASS

H202B-010 0.5-3.75 LPM, brass, 1/4” BSPP, max press-3500 psi

H202B-020 1-7.5 LPM, brass, 1/4” BSPP, max press-3500 psi







H800B-050 20-190 LPM, brass, SAE 20 ports, max press-3500 psi





S/STEEL

H202S-010 0.5-3.75 LPM, S/S, 1/4”BSPP, max press-6000 psi

H202S-020 1-7.5 LPM, S/S, 1/4”BSPP, max press-6000 psi

H602S-005 2-19 LPM, S/S, 1/2”BSPP, max press-6000 psi



H762S-020 10-76 LPM, S/S, 1”BSPP, max press-5000 psi

H762S-040 15-150 LPM, S/S, 1”BSPP, max press-5000 psi

H802S-075 40-280 LPM, S/S, 1-1/4”BSPP, max press-5000 psi

H802S-100 50-380 LPM, S/S, 1-1/4”BSPP, max press-5000 psi

H862S-150 50-560 LPM, S/S, 1-1/2” BSPP, max press-5000 psi

Variable Area Flow Meters by Hedland®

Flow

8

Model Turbine Flow Meters 316 S/S - Pulse Output

HB110-375-1/2 2.27-11.63 LPM, 1/2”NPT male ports, max press 5000 psi



HB110-875 11.36-113.6 LPM, 1”NPT male ports, max press-5000 psi

HB111-110 18.93-189.3 LPM, 1”NPT male ports, max press 5000 psi

HB111-115 56.8-681 LPM, 1-1/2”NPT male ports, max press-5000 psi

HB111-121 56.8-681 LPM, 2”NPT male ports, max press 5000 psi

HB111-120 151-1514 LPM, 2”NPT female ports, max press-5000 psi

Turbine Flow Meter by Blancett®

Designs to withstand the demands of the most rigorous flow measurement applications of water and other liquids, the

Model 1100 Turbine Flow Meters feature rugged stainless steel and tungsten carbide constructions. For a complete

system, the HB30 flow monitor provides a local indication of both flow rate and total flow. To integrate with other

instruments, PLCs and computers, Blancett® also offers additional electronic accessories.

Model B300 Flow Monitor, loop Powered, 4-20 mA and Battery Powered

HB30AM-CS

Advanced Meter MOUNT. Models are loop-powered with 4-20mA and pulse outputs, and

include battery back-up power supply. Battery powers the display only when 4-20mA loop not

available. Units include 2 adjustable flow rate alarms, and Modbus® RTV digital communications

over RS485.

HB30AR-CS

Advanced Remote Mount (less cable). Advanced and Base models are loop-powered with

4/20mA and pulse outputs, and include battery back-up power supply. Battery powers display

only when 4/20mA loop not available. Units include 2 adjustable flow rate alarms, and Modbus®

RTV digital communications over RS485.

HB30AS-CS

Advanced Swivel Mount. Models are loop-powered with 4/20mA and pulse outputs, and include

battery back-up power supply. Battery powers display only when 4/20mA loop not available.

Units include 2 adjustable flow rate alarms, and Modbus® RTV digital communications over

RS485.

HB30SM-CS Solar Meter Mount. Units include a rechargeable battery and include no outputs (display only).

HB30SR-CS Solar Remote Mount (less cable). Units include a rechargeable battery and include no outputs

(display only).

HB30SS-CS Solar Swivel Mount. Units include a rechargeable battery and include no outputs (display only).

Model Frequency to Current or Voltage Converters for use with Turbines

HB220-950 Frequency to Current, (4..20mA), includes mag pick-up.

HB220-951 Frequency to Voltage, (0..5VDC), includes mag pick-up.

Model Cable for connecting Converter or Turbine to Remote Monitor

HB220-220 3 metres Cable with 2pin 90deg connector for Turbine to Remote Display (Pulse output).

HB220-221 3 metres Cable with 2pin Straight connector for Turbine to Remote Display (Pulse output).

HB220952-15 4.6 metres Cable with 5pin Straight connector for Converter to Remote Display

(analogue output).

Flow

9

Series Model Description

PFM6-15 HF5110-PSI Port size G 3/4 - flow range: 4-56 LPM

PFM6-30 HF5111-PSI Port size G 3/4 - flow range: 7.5-113.6 LPM

PFM6-60 HF5112-PSI Port size G 1 - flow range: 12-227 LPM

PFM6-85 HF5113-PSI Port size G 1 - flow range: 15-321 LPM

PFM6-200 HF5114-PSI Port size G 1 -1/2 - flow range: 26-757 LPM

Portable Hydraulic Testers by Flo-tech®

Flo-Tech ™ portable hydraulic testers are compact and portable units, designed for fast, diagnostic trouble-shooting of

mobile and stationary hydraulic systems.

The Flo-Check ® USB Hydraulic system analayser utilises a data acquisition module to record the operating parameters

of the hydraulics system and transfers them to the user’s laptop computer, where multiple operating parameters

(bi directional flow, pressure, temperature, power) may be monitored in real-time.

Uni-Directional

Series Model Description

PFM68D-60 HF5082-PSI Port size SAE 16 - flow range: 12-227 LPM

PFM68D- 85 HF5083-PSI Port size SAE 16 - flow range: 15-321 LPM

PFM68D-200 HF5084-PSI Port size SAE 24 - flow range: 26-757 LPM

Bi-Directional

UBS System Analyser

Model Description

HF7160 Port size SAE 16 - flow range: 3-85 GPM

HF7161 Port size SAE 24 - flow range: 7-199.9 GPM

HF7162 Port size G 1 - flow range: 15-321 LPM

HF7163 Port size G 1 -1/2 - flow range: 26-757 LPM

Flow

10

DUFX1-B1 Small pipe, DN6 to DN 25 (1/4” to 1)

DUFX1-D1 Standard pipe, DN25-DN3000 (1” to 120”)

DUFX1-F1 Both small pipe + standard pipe

Model UFX Doppler Ultrasonic Flow Meter - Handheld by Dynasonics®

The series UFX Doppler flow meters features an advanced ultrasonic measuring technology. Providing accurate and reliable flow

velocity assessments.

The series UFX flow meter is a cost-effective flow measurement system for closed full pipes sizes from DN 6 to DN 3000 (1/4” to 120”).

Applications: Portable flow measurements on liquid containing a minimum of 100ppm of 100 micro size suspended solids or aeration in

closed full pipes.

Features: Non - invasive, handheld sensor and battery-powered electronics packaged in a NEMA 4 (IP65) rated enclosure. Measures fluid

velocities from 0.1 to 9m/s. Reliable reading on nearly all liquid applications containing a minimum of 100ppm of 100 micro sizes

suspended solids or entrained gases. Large four-digits LCD display provides velocity readout in user selected units (m/s or ft/s). Easy to

use flow verification instruments for industrial and municipal applications including paper pulp stock, concrete slurries, dredging,

primary sludge and waste activated sludge.

Model Description

DDFX2-B1NA-NN Digital Doppler ultrasonic flow transmitters. Rate and totalizer, 230VAC, 4-20mA, eight digital

resettable.

DDFX2-E1NA-NN Digital Doppler ultrasonic flow transmitters. Rate and totalizer, 12-28VDC, 4-20mA, eight digital

resettable.

Digital Doppler Ultrasonics Flow Transmitters

Digital Doppler Ultrasonic Sensor Set

Model Description

DT94-020-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 6 m. standard pipe

DT94-050-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 15m. standard pipe

DT94-100-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 30 m. standard pipe

DT95-020-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 6m. small pipe

DT95-050-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 15 m. small pipe

DT95-100-N Doppler ultrasonic sensor set. max. temp. 121ºC. cable length 30m. small pipe

Ordering Matrix

Model DFX Doppler Ultrasonic Flow Meter - Strap - on by Dynasonics®

Feature: Non-intrusive, clamp-on sensor for most pipes from DN6 to DN1500 (1/4” to 59”). Wide velocity range: 0.05 to 9 m/s (0.15 to

30ft/s). Flexibility with automatic gain control and in-field linearization, the DFX will adapt to a wide variety of applications.

Microprocessor-based system: configuration and accumulation data stored in non-volatile flash ROM.

Applications: Successful applications of Doppler ultrasonics flow meter relies on certain physical constraints:

The liquid flowing within the pipe must contain 100ppm of useful sonic suspended reflectors. Dissolved solids do not generate

reflections and are not relevant.

A significant portion of the ultrasound energy generated by the sensor must reach the sonic reflectors. The pipe must be completely

filled with liquid when measurements are made. The DFX microprocessor assumes that the pipe is completely full when it calculates

flow rate. Use on partially-filled pipes may result in inaccurate reading.

Flow

11

Model TFXL by Dynasonics®

Economical , non intrusive transit-time Flow Meter

Description: Clamp-on Ultrasonic Flow Meter for Liquids.

The Series TFXL® ultrasonic flow meter clamps onto the outside of a pipe and does

not contact the internal liquid. This meter provides instantaneous rate and

accumulated flows along with 4-20mA and pulse outputs. Compact integral mount

systems can accommodate pipes/tubing DN15 to DN50 (1/2” to 2’).

Remote mount systems are also available for pipe/turbine sizes DN15 to DN3000

( 1/2” to 120”).

Benefits:

Reduce material cost: Clamp-on sensor eliminates the need for in-line flanges, pipe

fittings, strainers, and filters.

Reduced installation time: May be installed and fully operational within minutes.

No need to break into pipelines.

Reduced maintenance cost: With no moving parts, there is nothing on the TFXL to

wear down. No repair kits or replacement parts are needed.

Features:

Measures liquids with small amounts of suspended solids or aeration (e.g. surface

water, sewage).

Bi-directional flow measurement system. Totalizer options include forward,

reverse and net total.

Model TFX Ultra® by Dynasonics®

TFX Ultra® Ultrasonic flow and energy meters clamp onto the outside of pipes and

do not contact the internal liquid. The technology has inherent advantages over

alternate devices including: low-cost installation, no pressure head loss, no moving

parts to maintain or replace, no fluid compatibility issues, and a large, bi-

directional measuring range that ensures reliable reading even at very low and

high flow rates.

The TFX Ultra® is available in two versions: a stand-alone flow meter, and an

energy flow meter used in conjunction with dual clamp-on RTDs. The energy flow

meter measures energy usage in BTU, MBTU, MMBTU, TONS, KJ, KW, MW and is

ideal for retrofit, chilled water and other HVAC applications:

Common features:

Rate- total backlit display.

4-20mA output.

0-1,000 Hz rate pulse and dual alarm outputs (flow meter model only).

USB programming port.

RS485 ModBus® network connection.

Remote totalizer reset.

Flow

12

E-Series Badger Meter Europe ®

Stainless Steel Ultrasonic Flow Meter

Description:

The electronic Badger Meter E-Series® meter utilises ultrasonics and solid-state

technology in a compact, totally encapsulated, weatherproof, and UV-resistant

housing for residential and commercial applications. Electronic metering provides

information and data not typically available through traditional mechanical meters

and registers, such as rate of flow and reverse flow indication, and eliminates

measurement errors due to sand, suspended particles and pressure fluctuations.

Applications:

The E-Series® meter can be used for measuring potable, cold water in residential,

commercial and industrial services. It is ideal for non-potable, reclaimed, irrigation

water applications or less than optimum water conditions where small particles

exist.

Features:

Four sizes and lay lengths.

Completely submersible IP68.

Minimum extended low-flow rate lower than typical positive displacement meters.

Simplified one-piece electronic meter and register that are integral to the meter

body and virtually maintenance free.

Sealed, non-removable, tamper-protected meter and register.

Easy-to-read 9-digit LCD display – present consumption rate of flow, reserve–flow

indication and alarms.

Digital or industry standard encoder protocol.

ANSI/NSF standard 61 certified , Annex G.

ANSI/AWWA standard C700

Lead – free

Model E-25

5/8”

Model E-25

5/8” x 3/4”

Model E-35

3/4”

Model E-55

1”

Operating range 0,4 - 95 l/min

(0.1 - 25 GPM)

0,4 - 95 l/min

(0.1 - 25 GPM)

0,4 - 121 l/min

(0.1 - 32 GPM)

1,5 - 208 l/min

(0.40 - 55 GPM)

Extended low flow rate 0,2 l/min

(0.05 GPM)

0,2 l/min

(0.05 GPM)

0,2 l/min

(0.05 GPM)

1 l/min

(0.25 GPM)

Maximum continuous operation 95 l/min

(25 GPM)

95 l/min

(25 GPM)

121 l/min

(32 GPM)

208 l/min

(55 GPM)

Pressure loss 0,3 bar (4.3 PSI)

at 57 l/min (15GPM)

0,2 bar (3.0 PSI)

at 57 l/min (15GPM)

0,1 bar (1.8 PSI)

at 57 l/min (15GPM)

0,1 bar (1.8 PSI)

at 95 l/min (25GPM)

Reserve flow - maximum rate 15 l/min

(4.0 GPM)

15 l/min

(4.0 GPM)

15 l/min

(4.0 GPM)

34 l/min

(9.0 GPM)

Flow

13

The DXN Portable Ultrasonic Flow Meter is true hybrid ultrasonic flow meter,

capable of measuring liquid flow with multiple technologies, including:

Doppler, Transis Time and Liquid Thermal (Heat Energy) Flow. DXN is also

compatible with pipe wall thickness gauge, used to verify inside pipe

diameter and ensure highly accurate ultrasonic measurements when piping

details are unknown or unavailable.

The DXN has a number of advanced features that allow the user to obtain

accurate readings while capturing flow surges and high-speed batch

operations.

DXN captures and records multiple application parameters at one time with

an easy-to-use data logging function and provides the power to verify and

troubleshoot permanent flow installations with ease.

Model Description

HDXNP-ZBS-NN

BASIC 4-20mA output; Modbus TCP/IP communications, 1 GB on-board data logger (USB port)

colour touchscreen, IP65, rechargeable Li-ion battery, 1x set small-pipe & 1x standard transit time

transducers + track, 6 m cable & case.

HDXNP-ZTS-NN

ALL TRANSIT TIME 4-20 mA output; Modbus TCP/IP communication, 1 GB on- board data logger

(USB port) colour touchscreen, IP65, rechargeable Li-ion battery, basic kit plus large pipe

transducers + tracks, 6 m cable & case.

HDXNP-ZHS-NN

HYBRID 4-20mA output; Modbus TCP/IP communications, 1GB on-board data logger (USB port)

colour touchscreen, IP65, rechargeable Li-ion battery, basic kit and Doppler transducers + tracks,

6 m cable & case.

HDXNP-ZES-NN

ENERGY 4-20 mA output; Modbus TCP/IP communication, 1GB on-board data logger (USB port)

colour touchscreen, IP65, rechargeable Li-ion battery, energy-basic kit and non-invasive RTDs +

tracks, 6m cable & case.

HDXNP-ZFS-NN

FULL 4-20mA output; Modbus TCP/IP communications, 1 GB on-board data logger (USB port) colour

touchscreen, IP65, rechargeable Li-ion battery, full-includes all, transit time, doppler, RTDs and wall

thickness gauge + tracks, 6m cable & case.

The DXN Portable Ultrasonic Flow Meter by Dynasonics®

Level

14

Mechanical Level Gauges by Fozmula Limited®

Fozmula® is a private limited company, specialising in the design, development and manufacture of a wide range of

electro-mechanical, mechanical and electronic sensors and gauges for equipment requiring liquid level, temperature and

pressure measurement.

Mechanical Level Gauges 1-1/2” BSPT Connection

Model Description

POWGLL43-127 127 mm depth


















POWCA0347 Replacement dial for Fozmula Vertical Spiral Level Gauges

Model Description

POWGLL28/08 Top mount mechanical level gauges with 1m float arm

POWGLL28/09 Side mount mechanical level gauge with 1m float arm

POWG/MP2 Weld– on flange for side mount level gauge

Level

15

Liquid Level Sensor by Fozmula Limited®

The Model T/LL 130 series is designed for use in water, coolant or fuel/oil tanks and provides a factory set variable

resistive, voltage or PWM (Pulse Width Modulated) output suitable for driving industry standard fuel gauges or

connecting into PLCs.

The device has no moving parts and can be mounted at any angle above horizontal as long as it covers the whole depth

of the tank. The unit cannot be inverted. An optional manual calibration feature is available.

Liquid Level T/LL 130 Output 10-180 Ohms

Model Description

POWTLL130-150 150 mm diesel


















Liquid compatible with the construction materials, typically diesel, petrol, kerosene, water. Not suitable for fuels which contain Toluene

Level

16

Series Fuel Level Sensor by Fozmula Limited®

The Models T/LL 171 & T/LL 352 series are a range of highly advanced sensors designed to continuously measure the

height of the fuel level tank.

T/LL 171 Output 4-20mA

Model Description

POWTLL171-150 150 mm









T/LL 352 Output 4-20mA

Model Description






POWTLL352-1000 1000 mm

POWTLL352-1100 1100 mm

POWTLL352-1250 1250 mm

Level

17

Vertical Float Switches by Fozmula Limited®

Model TLL 70 Vertical Float Switches

N° Switches Stem Length

1x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

2 x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

3 x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

4 x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

5 x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

6 x switch

N/O or N/C

Below 500 mm

501mm - 1000 mm

1001mm - 1500 mm

1501mm - 1800 mm

Terminal Box - ABS @IP67 Header - 1” BSPP Steam Tube - 32mm Brass Float - Polypropylene Contact Rating - 10Watts

BM/15 Bund Leak Monitors

The BM/15 is designed to be mounted to a vertical or horizontal surface of the bund or

outer safety tank of a storage tank system and to indicate any leakage or liquid ingress into

the bund.

The system is a two part unit consisting of:

a) A till switch and weight which lie at the bottom of the bund.

b) An indicator unit which contains a battery, an LED leakage alarm indicator and press

button to test the battery.

Level

18

Float Switches

Reversible Switch Action

Model Description

GTSLS-01P

Top Mounted ON or OFF for float rise, polypropylene resin & foam construction, max switching

100VDC/0.5A/10W, operating temp 0..80degC.

Not suitable for fuel.

GTSLS-02P

Side Mounted ON or OFF for float rise, polypropylene resin & foam construction, max

switching 200VDC/1A/50W, operating temp 0..105degC.

Not suitable for fuel.

GTSLS-03S Top Mounted ON or OFF for float rise, stainless steel construction, max switching

200VDC/1A/50W, operating temp -20..120degC.

GTSLS-05 Side Mounted ON or OFF for float rise, stainless steel construction, max switching

200VDC/1A/50W, operating temp -20..120degC.

GTSLS-06S

Side Mounted ON or OFF for float rise, 316 S/S construction, max switching -200VDC/1A/50W,

operating temp -20..120degC.

1/2” BSPT connection.

POW T/E-C/12 Miniature Float Switch 1/8” BSP Brass/ Polypropylene - Fuel.

Level

19

Level Senders & Gauges by KUS®

Model Description

KUS CPFR-BB-0-190 Fuel gauge 52 mm, 0-190 Ohms, 12/24, Black Bezel

KUS CPWR-BB-0-190 Water level gauge 52 mm, 0-190 Ohm, 12/24V, Black Bezel

KUS S3-E150 Tank level sender, 0-190 Ohms, 150 mm, 1-1/4”BSPP

















KUS S5-E400 Tank level sender, 0-190 Ohms, 400 mm, 5 hole flange mount

KUS S5-E500 Tank level sender, 0-190 Ohms, 500 mm, 5 hole flange mount

KUS S3-X300 Tank level sender, 300 mm, 4-20mA - 3 wire output, 1-1/4”BSPP




KUS 163010 S3 Mounting flange plastic - top

KUS 163303 S3 Underside mounting flange

KUS JSM1714 Top + underside mounting kit

KUS MGCS-300 Mechanical Tank Level Sender with gauge 200 mm, 1-1/2”BSP, 0-190 Ohms






KUS MGCS-900 Mechanical Tank Level Sender with gauge 900mm, 1-1/2”BSP, 0-190 Ohms

KUS MGCS-1000 Mechanical Tank Level Sender with gauge 1000mm, 1-1/2”BSP, 0-190 Ohms

KUS CEFR-BB-4-20 Digital fuel gauge 52 mm, 4-20 mA

All have a Low Level

Switch & 12.5% of length

Engine Monitoring

20

Engine Monitoring by KUS®

Model Description

KUS CMHB-BB-3KL Tachometer 85mm, 3000 RPM, 12/24V, Black Bezel

KUS CMHB-BB-4KL Tachometer 85mm, 4000 RPM, 12/24V, Black Bezel

KUS KE10010 Magnetic pick up M16 x 1.5, tacho sensor

KUS KE10012 Magnetic pick up 5/8”, tacho sensor

KUS KE10065 Magnetic pick up M18 x 1.5, tacho sensor

KUS KE10066 Magnetic pick up 3/4”UNF

KUS CPPR-BB-0-5 Oil pressure gauge 52mm, 0-5 bar, 12/24V, Black Bezel

KUS CPPR-BB-0-10 Oil pressure gauge 52mm, 0-10 bar, 12/24V, Black Bezel

KUS KE21104 Pressure sender, 5 bar, 1/8” NPT, alarm 0.8 bar

KUS KE21100 Pressure sender, 10 bar, 1/8” NPT

KUS KE21103 Pressure sender, 10 bar, 1/8” NPT, alarm 0.8 bar

KUS CPVR-BB-18-32 Voltmeter 52 mm, 18-32V, Black Bezel

KUS CPVR-BB-8-16 Voltmeter 52 mm, 8-16V, Black Bezel

KUS CPTR-BB-40-120 Temperature gauge 52 mm, 40-120C, 12/24V, Black Bezel

KUS CPYR-BB-50-150 Temperature gauge 52 mm, 50-150C, 12/24V, Black Bezel

KUS KE00016 Temperature sender 120degC, M14x1.5, above earth

KUS KE0006 Temperature sender 120degC, 1/8”NPT

KUS KE01012 Temperature sender 150degC, M14x1.5, above earth

KUS KE01006 Temperature sender 150degC, 1/8”NPT

KUS CCUR-BB Hour meter 52mm, 12/24V, Black Bezel

POWS85/03 Coolant level switch 1/4 NPT, no liquid, closed, 10 sec. delay

POWS85/04 Coolant level switch 1/2 BSPT, no liquid, closed, 10 sec. delay

POWS85/05 Coolant level switch 1/2”NPT, no liquid, closed, 10 sec. delay

POWS85/110 Coolant level switch 1/4”NPT, no liquid, open, no delay

POWS85/13 Coolant level switch 1/4 NPT, no liquid, open, 10 sec. delay

POWS85/14 Coolant level switch 1/2” BSPT, no liquid, open, 10 sec. delay

POWS85/80 Coolant level switch 1/4 NPT, no liquid, closed, 10 sec. delay

POWS86/03 Oil level switch 1/4 NPT, no liquid, closed, 10 sec. delay

POWS86/04 Oil level switch 1/2” BSPT, no liquid, closed, 10 sec. delay

POWS86/13 Oil level switch 1/4” NPT, no liquid, open, 10 sec. delay

POWS86/14 Oil level switch 1/2”BSPT, no liquid, open, 10 sec. delay

Hand Held Tachometers

21

Hand Held Tachometers by DEUMO®

This precision measuring instrument offers: high accuracy, maintenance - free operation, simple and easy scale reading,

change over of measuring range, independent sense of rotation and the certainty of quick and precise information.

Model DEUMO 1 (Analogue) DEUMO 2 (Analogue) DEUMO 3 (Analogue)

Description 40/50,000 RPM

50...5000 m/min

24/30,000 RPM

30...3000 m/min

16/20,000 RPM

20...2000 m/min

ACCESSORIES & SPARE PARTS (only for analogue)

Model Description

DEUMO

4WH2U21301

Spare parts kit, extension rod, 2xrubber tip 18mm including 1x socket, 3x rubber

sleeve, 3x rubber tip 8mm, rubber follower cone including socket

DEUMO

Attachment Kit

Fitting attachments kits including rolling wheel, 8 mm tip including socket,

rubber following cone including socket

DEUMO

WH2U20301

Rolling wheel for RPM to m/ conversion

DEUMO WZ13F Extension rod

DEUMO WZ13H Rubber tip (8mm) & socket

DEUMO WH2U205 Rubber follower cone & socket

Chart Recorder

22

Chart Recorders by HEI®

Even more Robust & Tougher than existing models, yet light weight design.

A specially designed transit brake particularly relevant to portable instruments as it prevents calibration issues arising

from transportation. The brake also functions as a pen lift when changing charts.

Anti vibration options and Universal pen & chart combinations are also available.

HC 150SP

Panel mount & portable with carry handle and rubber feet. Single pen system.

Range options: psi, bar and kPa. Pressure range: maximum -1 to 10,000 bar or

equivalent psi.

HC 2000 SPT

Panel/wall mount & portable with carry handle and rubber feet. Single, Duplex or

Triplex system. Range options: psi, bar and kPa. Pressure range: maximum -1 to

10,000 bar or equivalent psi.

2000 STP

Panel/wall mount & portable with carry handle and rubber feet. Single, Duplex or

Triplex system. Range options: psi, bar and kPa. Pressure range: maximum -1 to

7,000 bar or equivalent psi.

Strip Recorder: Model HC2011 R2

Strip recording well suited for recording continuous processes:

Ultra Light weight and Compact Design.

Supplied as Single or Duplex Pen System.

Mounted in a trusted famous Pelicase – completely waterproof, no rusting.

Even more rugged, ideal for in the field.

Reinforced internally for pressure connections.

Roll charts are readily available or single sheet charts which can be printed by the customer.

Low repair and calibration costs.

Supplied complete with 1 chart roll and a 5 Point Calibration Certificate.

6”, 9” & 12” Light Weight Models

Model Description

Pressure

23

40 mm & 50mm Gauges

Pressure gauges of the comprehensive standard can be used in all applications where liquid or gaseous media are not highly viscous and do not attack copper alloys or crystallize. All standard pressure gauges comply with general international recommendations for measuring systems and take requirements for specific applications and technical standards into consideration.

P1410L572010 0..250 kPa/36 psi

MIT1-F40-D16 0-160 kPa

MIT1-F40-D17 0-200 kPa

MIT1-F40-D18 0-250 kPa

MIT1-F40-D26 0-2500 kPa

GTS40-RE-75 0-1000 kPa/145 psi glycerine filled

GTS40-RE-79 0-4000 kPa/580 psi glycerine filled

P1420L570008 0..160 kPa/23 psi

P1420L574007 0..600 kPa/87 psi

P1420L576011 0..1600 kPa/230 psi

P1420L580007 0..6000KPa/870 psi

40 mm, ABS Plastic Case, 1/8” BSPT Bottom Conn.

40 mm, S/S Case, Brass Wetted Parts, 1/8”BSPT Rear Conn.

Model Description

ABS Plastic Case, 1/8”BSPT Rear Conn.

50 mm, ABS Plastic Case, 1/8” BSPT Bottom Conn.

P1459L516009 Vacuum - 100..0kPa/-30inHg

P1459L572007 0..250 kPa/36 psi

P1459L573006 0..400 kPa/58 psi, 1/4”BSPT connection

P1459L576007 0..1600 kPa/230 psi

P1459L578007 0..2500 kPa/360 psi

AEW90X000245 Panel clamp

AEW90X000249 3 Hole Front flange-black

Accessories for P1459

Pressure

24

50 mm & 63mm Gauges

GTS50-RE-16 Vacuum - 100..0 kPa glycerine filled

GTS50-RE-69 0..100 kPa/14.5 psi glycerine filled

GTS50-RE-72 0..250 kPa/36 psi glycerine filled







GTS50-BE-16 Vacuum - 100..0 kPa/-30inHg

GTS50-BE-69 0..100 kPa/14.5 psi glycerine filled

GTS50-BE-72 0..250 kPa/36 psi glycerine filled







50 mm, S/S Case, Brass Wetted Parts, 1/8” BSPT Bottom Conn.

Model Description

50 mm, S/S Case, Brass Wetted Parts, 1/8” BSPT Rear Conn.

P1444.579.010 0..4000 kPa/580 psi

P1444.580.009 0..6000 kPa/870 psi

P1444L573015 0..25000 kPa/3600 psi Steel Case

63mm, ABS Plastic Case, 1/4” BSPT Bottom Conn.

P1430L516008 Vacuum - 100..0kPa/-30inHg

P1430L567007 0..60 kPa/8.7 psi

P1430L570007 0..160 kPa/23 psi

P1430L575015 0..1000 kPa/145 psi

P1430L576010 0..1600 kPa/230 psi

P1430L578007 0..2500 kPa/360 psi

P1430L579007 0..4000 kPa/580 psi

P1430L580007 0..6000 kPa/870 psi

P1435L575014 0..1000 kPa/145 psi REAR CONN.

AW002X110776 Max indicating pointer to suit 1430

100mm, ABS Plastic Case, 3/8”BSPT Bottom Conn.

Pressure

25

Medical Gauges and Capsule Gauges by tecsis®

Pressure gauges designed and manufactured for a variety of medical applications, such as angioplasty inflation devices,

anaesthesia equipment, medical regulators, respiratory equipment, dental systems, and many other applications.

Vacuum

P1430L516017

Vacuum Gauges 63 mm, “Twin-0-VAC”, 750 mmHg/-100..0 kPa, S/S case electro polished,

G1/4”BSPP chrome bottom conn, yellow dial

Contents

P1403L679506

Resuscitator /02 Regulator. Contents Gauges 52mm, 0-30,000 kPa, cleaned for OXYGEN use,

white case, safety blow out back, nickel plated bottom 1/4”NPT conn, 0-3 mm dial, restrictor

P1553M062003 Capsule 0..60 mbar





P1553L569006 Capsule 0..10 kPa/1.45 psi

P1553L605007 Capsule 0..40 kPa

P2080L484006 Capsule -10..0..+16 kPa ALL S/S

Model Description

Capsule Gauges 63mm, Black Steel Case, G1/4” BSPP Bottom Conn. 10 x Over Pressure Safety






Capsule Gauges 100mm, Stainless Case, G1/2”BSPP Rear Conn. 10 x over Pressure Safety

Capsule Gauges are “Dry” and “Not fillable”- To be used ON

“Dry Air” and “Gases ONLY” - No liquid

Datasheet DE208

Datasheet DE210

Pressure

26

Model P1454 Heavy Duty Pressure Gauges 63mm by tecsis®

The glycerine filling of the case protects the measuring system against wear and tear from pulsating pressures and

mechanical vibration; at the same time it provides lubrication of the moving parts.

1/4” BSPT KPa/psi scale 1/4”BSPP

(G1/4”) Bar Scale

1/4”BSPP

(G1/4”) Bar/psi scale

P1454L516007 Vacuum 100..0kPa/-30inHg P1454B016001 Vacuum -1..0

P1454L543007 Compound -100kPa/-30Hg… +150 kPa/psi P1454B043001 -1..+1.5 bar

P1454L544007 Compound -100kPa/-30inHg... +300 kPa/psi P1454B044001 -1..+3 bar

P1454L545006 Compound -100kPa/-30Hg…+500 kPa/psi P1454B045001 -1..+5 bar

P1454L546006 Compound -100kPa/-30Hg…+900 kPa/psi P1454B046901 -1..+9 bar

P1454L569010 0..100 kPa/14.5 psi P1454B069001 0..1 bar P1454B069002 0..1 bar/14.5 psi

P1454L570007 0..160 kPa/23 psi

P1454L572010 0..250 kPa/36 psi P1454B072001 0..2.5 bar P1454B072002 0..2.5 bar/36 psi

P1454L573009 0..400 kPa/58 psi P1454B073001 0..4 bar P1454B073002 0..4 bar/58 psi


P1454L644006 0..800 kPa/115 psi









P1454B085013 0..315 bar/4500 psi



P1454B088001 0..1000 bar P1454B088002 0..1000bar/14500 psi

P1454P383025 0..10000 psi SINGLE SCALE, 1/4” NPT

P1454P384015 0..15000 psi SINGLE SCALE, 1/4” NPT

Datasheet DE205

S/S Case, Brass Wetted Parts, Bottom Thread Connection, Glycerine Filled

International Certificate

A1302X010030 G1/4” BSPP female to 1/4” NPT male adapter

A1314X020004 G1/4” BSPP compression washer

AW001X195751 3 hole front flange push-on S/S

A5094X001048 Rear Flange S/S - WELD ON

Accessories

Pressure

27


The mounting bracket offers a possibility of quick modification for panel mounting.

1/4” BSPT KPa/psi scale 1/4”BSPP (G1/4”) Bar Scale 1/4”BSPP Bar/psi scale

P1453L516008 Vacuum -100..0kPa/-30inHg P1453B016002 Vacuum -1..0 bar

P1453L543008 Compound -100..+150 kPa/inHg

P1453L545008 Compound -100..+500 kPa/inHg P1453B045001 -1+5 bar

P1453L546006 Compound -100..+900 kPa/inHg P1453B049902 -1+15 bar

P1453L569007 0..100 kPa/14.5 psi P1453B069002 0..1 bar P1453B069004 0..1 bar/14.5 psi

P1453L570006 0..160 kPa/23 psi

P1453L572007 0..250 kPa/36 psi P1453B072002 0..2.5 bar P1453B072004 0..2.5 bar/36 psi



P1453L644007 0..800 kPa/115 psi






P1453L581006 0..10000 kPa/1450psi P1453B081002 0..100 bar P1453B081004 0..100 bar/1450 psi



P1453B085017 0..315 bar/4500 psi


P1453B087002 0..600 bar P1453B087004 0..600 bar/8700 psi

S/S Case, Brass Wetted Parts, Rear Thread Connection, Glycerine Filled


Datasheet DE205

A1302X010030 G1/4” BSPP female to 1/4” NPT male adapter

A1314X020004 G1/4” BSPP compression washer

AW001X195751 3 hole front flange push-on S/S

Accessories

Pressure

28


The Heavy Duty pressure gauges with glycerine filling are used at measuring points with high dynamic alternating loads

and strong vibrations and pulses.

3/8” BSPT KPa/psi scale 1/2”BSPP (G1/2”) Bar Scale

P1778L516007 Vacuum -100..0 kPa/-30inHg P1778B016002 -1..0 bar

P1778L543006 Compound -100..+150 kPa/inHg P1778B043002 -1..+1.5 bar

P1778L544007 Compound -100..+300 kPa/ psi P1778B044002 -1..+3 bar


P1778L546007 Compound -100..+900 kPa/inHg P1778B046002 -1..+9 bar

P1778L567006 0..60 kPa/8.7 psi P1778B067002 0.6 bar

P1778L569009 0..100 kPa/14.5 psi P1778B069002 1 bar

P1778L570006 0..160 kPa/23 psi P1778B070002 1.6 bar

P1778L572009 0..250 kPa/36 psi P1778B072002 2.5 bar

P1778L573007 0..400 kPa/58 psi P1778B073002 4 bar

P1778L574011 0..600 kPa/87 psi P1778B074002 6 bar

P1778L644006 0..800 kPa/115 psi

P1778L575011 0..1000 kPa/145 psi P1778B075002 10 bar

P1778L576010 0..1600 kPa/230 psi P1778B076002 16 bar

P1778L578008 0..2500 kPa/360 psi P1778B078002 25 bar

P1778L579006 0..4000 kPa/580 psi P1778B079002 40 bar

P1778L580007 0..6000 kPa/870 psi P1778B080002 60 bar

P1778L581007 0..10000 kPa/1450 psi P1778B081002 100 bar

P1778L582008 0..16000 kPa/2300 psi P1778B082002 160 bar

P1778L584008 0..25000 kPa/3600 psi P1778B084002 250 bar

P1778L586008 0..40000 kPa/5800 psi P1778B086002 400 bar

P1778L587008 0..60000 kPa/8700 psi P1778B087002 600 bar

P1778L588007 0..100000 kPa/14500 psi P1778B088002 1000 bar

S/S Case, Brass Wetted Parts, Bottom Thread Connection


Datasheet DE206

A5094X002007 Rear flange stainless steel - weldon

A6527X016003 Stainless steel case with rear flange

Accessories

Pressure

29


The modern modular construction system with an O-ring sealing system, tried and tested for many years, ensures a high

level of functional safety and a long service life.


P1779L516006 Vacuum -100..0 kPa/-30inHg

P1779L546008 -100..0..900 kPa/ psi

P1779L569007 0..100 kPa/14.5 psi

P1779L570006 0..160 kPa/23 psi

P1779L572006 0..250 kPa/36 psi P1779B072002 2.5 bar

P1779L573006 0..400 kPa/58 psi P1779B073002 4 bar

P1779L574006 0..600 kPa/87 psi P1779B074002 6 bar

P1779L644006 0..800 kPa/115 psi

P1779L575007 0..1000 kPa/145 psi P1779B075002 0..10 bar

P1779L576007 0..1600 kPa/230 psi P1779B076002 0..16 bar

P1779L578006 0..2500 kPa/360 psi P1779B078002 0..25 bar

P1779L579006 0..4000 kPa/580 psi P1779B079002 0..40 bar

P1779L580006 0..6000 kPa/870 psi P1779B080002 0..60 bar

P1779L581007 0..10000 kPa/1450 psi P1779B081002 0..100 bar

P1779L582006 0..16000 kPa/2300 psi P1779B082002 0..160 bar

P1779L584006 0..25000 kPa/3600 psi P1779B084002 0..250 bar

P1779L586007 0..40000 kPa/5800 psi P1779B086002 0..400 bar

P1779B087002 0..600 bar

S/S Case, Brass Wetted Parts, Rear Thread Connection with Panel Clamp

A6750X001178 3 Hole front flange stainless steel


Datasheet DE206

Accessories

Pressure

30

Model P2032 ALL S/S Heavy Duty Pressure Gauges 63mm by tecsis®

All stainless steel pressure gauges are ideal for the harsh conditions and the resulting high demands on pressure

measurement in production facilities in chemical industry and other comparable branches. Resistance to aggressive

media is achieved by using high-grade material such as stainless steel both for the measuring system and the case.


P2032L516007 Vacuum -100..0 kPa/-30inHg P2032B016001 -1 bar

P2032L544006 Compound -100..300 kPa/ psi P2032B044001 -1..+3 bar



P2032L569007 0..100 kPa/14.5 psi P2032B069901 1 bar

P2032L570007 0..160 kPa/23 psi P2032B070001 1.6 bar

P2032L572007 0..250 kPa/36 psi P2032B072001 2.5 bar

P2032L573007 0..400 kPa/58 psi P2032B073001 4 bar

P2032L574008 0..600 kPa/87 psi P2032B074001 6 bar

P2032L663006 0..800 kPa/115 psi

P2032L575007 0..1000 kPa/145 psi P2032B075001 10 bar

P2032L576007 0..1600 kPa/230 psi P2032B076001 16 bar

P2032L578008 0..2500 kPa/360 psi P2032B078001 25 bar

P2032L579007 0..4000 kPa/580 psi P2032B079001 40 bar

P2032L580007 0..6000 kPa/870 psi P2032B080901 60 bar

P2032L581007 0..10000 kPa/1450 psi P2032B081001 100 bar

P2032L582007 0..16000 kPa/2300 psi P2032B082001 160 bar

P2032L584007 0..25000 kPa/3600 psi P2032B084901 250 bar

P2032L586007 0..40000 kPa/5800 psi P2032B086001 400 bar

P2032B087901 600 bar

P2032B088901 1000 bar

304 S/S & 316 S/S Wetted Parts, Bottom Thread Connection, Glycerine Filled

SI/GA-F4R-M4-6K-H 316 S/S Adapter, 1/4” BSPT Female, 1/4” NPT Male, 6K rated



Datasheet DE234

Accessories

Pressure


The glycerine filling provides wear-protection for the measuring-system through damping, should pulsating pressures

and mechanical vibrations occur. The measuring system is of accuracy class 1.6 has overload protection amounting

to 1.3 times the max. rating and can be loaded up to the full scale value.


P2033L516007 Vacuum -100..0kPa/-30inHg P2033B016001 -1 bar




P2033L569007 0..100 kPa/14.5 psi P2033B069901 1 bar

P2033L572006 0..250 kPa/36 psi P2033B072001 2.5 bar

P2033L573006 0..400 kPa/58 psi P2033B073001 4 bar

P2033L574008 0..600 kPa/87 psi P2033B074001 6 bar

P2033L575008 0..1000 kPa/145 psi P2033B075001 10 bar

P2033L576006 0..1600 kPa/230 psi P2033B076001 16 bar

P2033L578006 0..2500 kPa/360 psi P2033B078001 25 bar

P2033L579006 0..4000 kPa/580 psi P2033B079001 40 bar

P2033L580006 0..6000 kPa/870 psi P2033B080901 60 bar

P2033L581006 0..10000 kPa/1450 psi P2033B081001 100 bar

P2033L582006 0..16000 kPa/2300 psi P2033B082001 160 bar

P2033L584006 0..25000 kPa/3600 psi P2033B084001 250 bar

P2033L586006 0..40000 kPa/5800 psi P2033B086901 400 bar

P2033B087901 600 bar

P2033B088901 1000 bar

304 S/S & 316 S/S Wetted Parts, Rear Thread Connection, Glycerine Filled

31


Datasheet DE234



SI/GA-F4R-M4-6K-H 316 S/S Adapter, 1/4” BSPT Female, 1/4” NPT Male, 6K rated

Accessories

Pressure

32


Resistance to aggressive media and environments is achieved by using high-grade stainless steel both for the measuring

system and the case.

1/2” NPT KPa/psi scale 1/2”BSPP (G1/2”) Bar Scale

P2325L516010 Vacuum -100..kPa/-30inHg P2325B016001 -1 bar

P2325B042901 -1..+0.6 bar

P2325L543006 Compound -100..+150 kPa/ psi P2325B043001 -1..+1.5 bar

P2325B044001 -1..+3 bar

P2325L545006 Compound -100..0..+500 kPa/ psi P2325B045001 -1..+5 bar

P2325L546007 Compound -100..0..+900 kPa/ psi P2325B046901 -1..+9 bar

P2325B049901 -1..+15 bar

P2325L567008 0..60 kPa/8.7 psi P2325B067001 0.6 bar

P2325L569014 0..100 kPa/14.5 psi P2325B069001 1 bar

P2325L570008 0..160 kPa/23 psi P2325B070001 1.6 bar

P2325L572012 0..250 kPa/36 psi P2325B072001 2.5 bar

P2325L573024 0..400 kPa/58 psi P2325B073001 4 bar

P2325L574010 0..600 kPa/87 psi P2325B074001 6 bar

P2325L644006 0..800 kPa/115 psi

P2325L575011 0..1000 kPa/145 psi P2325B075001 10 bar

P2325L576011 0..1600 kPa/230 psi P2325B076001 16 bar

P2325L578009 0..2500 kPa/360 psi P2325B078001 25 bar

P2325L579011 0..4000 kPa/580 psi P2325B079001 40 bar

P2325L580011 0..600 kPa/870 psi P2325B080001 60 bar

P2325L581010 0..10000 kPa/1450 psi P2325B081001 100 bar

P2325L582008 0..16000 kPa/2300 psi P2325B082001 160 bar

P2325L584009 0..25000 kPa/3600 psi P2325B084001 250 bar

P2325L586007 0..40000 kPa/5800 psi P2325B086001 400 bar

P2325L587006 0..60000 kPa/8700 psi P2325B087001 600 bar

P2325B088001 1000 bar

304 S/S Case & 316 S/S Wetted Parts, Bottom Thread Connection

P2325P383019 0..10000psi SINGLE SCALE

P2325P384011 0..15000psi SINGLE SCALE

A6799X104396 10000 psi/bar. Dial 100 mm

A6799X104395 15000 psi/bar. Dial 100 mm

SI/GA-F8-M4-10K-H 316 S/S Adapter, 1/2” NPT female, 1/4” NPT male, 10k rated



Datasheet DE232

Dials

S/S Adapters

Pressure

33


All stainless steel pressure gauges are ideal for the hard conditions and the resulting high demands on pressure

measurement in production facilities in chemical industry and other comparable branches. Resistance to aggressive

media and environments is achieved by using high-grade materials such as stainless steel both for the measuring system

and the case.

The glycerine-filled version is damped for wear-protection should pulsating pressures and mechanical vibrations occur.

The measuring system is of accuracy class 1.0, has over range protection amounting to 1.3 times the max. rating and can

be loaded up to the full scale value.

1/2” NPT KPa/psi scale

P2329L516010 Vacuum -100..kPa/-30inHg

P2329L572011 0..250 kPa/36 psi

P2329L574011 0..600 kPa/87 psi

P2329L575006 0..1000 kPa/145 psi

P2329L576006 0..1600 kPa/230 psi

P2329L578008 0..2500 kPa/360 psi

P2329L579006 0..4000 kPa/580 psi

P2329L581007 0..10000 kPa/1450 psi

P2329L582006 0..16000 kPa/2300 psi

P2329L584007 0..25000 kPa/3600 psi

P2329L586007 0..40000 kPa/5800 psi

P2329L587006 0..60000 kPa/8700 psi

P2329P383016 0..10000 psi Single Scale

P2329P384009 0..15000 psi Single Scale

All S/S, Fillable, 1/2”NPT Rear Conn, C/W Panel Clamp




Datasheet DE232


Accessories

Pressure

34

All 316 S/S 160 mm Gauges by tecsis®

P2316L516 Vacuum -100..0 kPa/-30 inHg

P2316L569008 0..100 kPa

P2316L570 0..160 kPa

P2316L572009 0..250 kPa

P2316L573008 0..400 kPa

P2316L574014 0..600 kPa

P2316L644006 0..800 kPa

P2316L575010 0..1000 kPa

P2316L576008 0..1600 kPa

P2316L578010 0..2500 kPa

P2316L579007 0..4000 kPa

P2316L580007 0..6000 kPa

P2316L581007 0..10000 kPa

P2316L582007 0..16000 kPa

P2316L584007 0..25000 kPa

P2316L586007 0..40000 kPa

P2316L587007 0..60000 kPa

All 316 S/S, Fillable, 1/2”NPT Bottom Conn

Model Description

P1587L552017 Compound Gauge 100mm -100..+2500 kPa single scale, FIRE TRUCK S/S case fillable 3/8”BSPT

centre rear conn. c/w, panel clamp, (zero@ 12 o’clock)

P1587B052016 Compound Gauge 100mm -1 to 25 bar single scale, FIRE TRUCK S/S case fillable 3/8”BSPT centre

rear conn. c/w, 3 hole front flange, (zero@ 12 o’clock)

ACCESSORIES

AW002X350845 Bezel, safety glass lens & seal kit

AEW90X000723 Rear flange - WELD ON

AW001X348280 Max pointer

AW001X113151 Max pointer glass

FIRE TRUCK GAUGE


A6799X162395 160mm Dial 0..25 bar/360 psi

A6799X162396 160mm Dial 0..100 bar/1450 psi

A6799X162397 160mm Dial 0..160 bar/2300 psi

A6799X162398 160mm Dial 0..250 bar/3600 psi

A6799X162399 160mm Dial 0..400 bar/5800 psi

A6799X162400 160mm Dial 0..4000 bar/275 psi

A6799X162401 160mm Dial 0..6000 bar/400 psi

Pressure

35

Safety Pattern Pressure Gauges by tecsis®

P2113L569 0..100 kPa/14.5 psi

P2113L570 0..160 kPa/23 psi

P2113L572 0..250 kPa/36 psi

P2113L573 0..400 kPa/58 psi

P2113L574012 0..600 kPa/87 psi

P2113L644 0..800 kPa/115 psi

P2113L575012 0..1000 kPa/145 psi

P2113L576008 0..1600 kPa/230 psi

P2113L578009 0..2500 kPa/360 psi

P2113L579007 0..4000 kPa/580 psi

P2113L580008 0..6000 kPa/870 psi

P2113L581008 0..10000 kPa/1450 psi

P2113L582 0..16000 kPa/2300 psi

P2113L584 0..25000 kPa/3600 psi

P2113L586006 0..40000 kPa/5800 psi

P2113L587 0..60000 kPa/8700 psi

100mm, ALL 316 S/S, Fillable, Solid Front/Blow-out Back, Safety Glass, 1/2 “ NPT Bottom Conn.

Model Description

130mm, POCAN Case, 316 S/S Wetted Parts, Fillable, Solid Front/ Blow-out Back,

Safety Glass, 0.5% FSA, 1/2”NPT

Thermomanometer

P21199L569 0..100 kPa

P2119L570 0..160 kPa

P2119L572 0..250 kPa

P2119L573 0..400 kPa

P2119L574 0..600 kPa

P2119L644 0..800 kPa

P2119L575009 0..1000 kPa

P2119L576 0..1600 kPa

P2119L578 0..2500 kPa

P2119L579 0..4000 kPa

P2119L580007 0..6000 kPa

P2119L581 0..10000 kPa

P2119L582 0..16000 kPa

P2119L584 0..25000 kPa

P2119L586 0..40000 kPa

P2119L587 0..60000 kPa

P1497B073001 Thermomanometer 80mm 0..4bar and 120degC, ABS case, brass wetted parts, 1/2”BSPT rear conn.

c/w thermowell

P1497B074001 Thermomanometer 80mm 0..6bar and 20-120degC, ABS case, brass wetted parts, 1/2”BSPT rear conn.

c/w thermowell

P1497B075001 Thermomanometer 80mm 0..10bar and 20-120degC, ABS case, brass wetted parts, 1/2”BSPT rear conn.

c/w Thermowell

POCAN is the tradename for the

LANXESS range of semi-

crystalline thermoplastic polyes-

ters based on polybutylene

terephthalate (PTB) and polyeth-

ylene terephthalate (PET).

These resins are noted for their

chemical & high heat resistance


Datasheet DE228

Datasheet DE244

Pressure

36

Digital Pressure Gauges by tecsis®

P3961B101001 -1..0..2 bar

P3961B045001 -1..0..5 bar

P3961B047001 -1..0..10 bar

P3961B071001 0-2 bar

P3961B121001 0-5 bar

P3961B075001 0-10 bar

P3961B077001 0-20 bar

P3961B785001 0-50 bar

P3961B081001 0-100 bar

P3961B082001 0-160 bar

P3961B084001 0-250 bar

P3961B086001 0-400 bar

P3961B087001 0-600 bar

P3961B104001 0-700 bar

Model P3961 Pressure Gauge Digital G1/4” BSPP Bottom Conn S/S Case, 4 Digital LCD

Display, Min-Max Value, Field Programmable bar, psi or MPa, IP65

Model Description

Model P3962 Pressure Gauge Digital G1/4” BSPP Bottom Conn S/S Case, 4 1/2 Digital LCD

Display, Min-Max Value, Field Programmable bar, psi or MPa, IP65, Backlight Display,

Tare Suppression, Rotatable Head, Password Protection and Second LCD Display

P3962B101001 -1..0..2 bar

P3962B071001 0-2 bar

P3962B121001 0-5 bar

P3962B075001 0-10 bar

P3962B077001 0-20 bar

P3962B785001 0-50 bar

P3962B081001 0-100 bar

P3962B082001 0-160 bar

P3962B084001 0-250 bar

P3962B086001 0-400 bar

P3962B087001 0-600 bar

P3962B104001 0-700 bar

A5941X003003 Rubber protection shroud for P3961/P3962

A5136X002015 Battery cover

SI/GA-F4G-M4-10K-H G1/4” BSPP female, 1/4” NPT male adapter, 10k pressure rated

This digital manometer is the ideal solution for local digital display independent of the mains. The integrated battery allows measurements to be made independent of a fixed source of power.

Datasheet DE777

Datasheet DE777

Accessories

Pressure

37

Test Kits Digital & Analogue by tecsis®

TK61002 Test kit with P3961B072001- 2bar digital gauges





TK61100 Test kit with P3961B080001-100bar digital gauges





Model Description

Analogue

TK Analogue

Test kit complete-contains 3xP1454, 63mm, bar/psi dual scaled, S/S case, copper alloy wetted

parts, G1/4”BSPP bottom entry gauges of choice from vacuum to 600bar/psi dual scale + case

fittings and hose as above

Test Kit includes case with foam insert, rubber gauge protection shroud, (for digital gauge only) 2m connection hose,

5x male fittings, (test 20 to G1/4”BSPP, 1/8”NPT, 1/4”NPT, 7/16”UNO, 9/16” UNO).

TK62002 Test kit with P3962B072001- 2bar digital gauge





TK62100 Test kit with P3962B080001-100bar digital gauge





TKFIT 1/4 BSPP Fitting G1/4”BSPP male to test 20

TKFIT 1/8 NPT Fitting 1/8” NPT male to test 20

TKFIT 1/4 NPT Fitting 1/4”NPT male to test 20

TKFIT 7/16 UNO Fitting 7/16” UNO male to test 20

TKFIT 9/16 UNO Fitting 9/16” UNO male to test 20

TKFIT Hose 2m Test hose 2m, G1/4 to test 20



Accessories

38

Pressure Gauge Accessories by tecsis®

AEW90X000505 Pointer puller, plier type

C1351X085005 Compound pneumatic hand pump with micro adjustment 0.95..0..35bar

Model Description

A1307X010004 Rubber protection shroud 63mm RED

A1307X010005 Rubber protection shroud 63mm BLUE

A1307X010010 Rubber protection shroud 63mm BLACK

A5094X001048 Rear flange S/S-weld on

AW001X195751 S/S 3 Hole front flange push - on

A5188X001015 Restrictor (press fit) 0.3mm, brass for models P 1453/1454

A5188X001029 Restrictor (press fit) 0.3mm, S/S for models P 2032/2033


A6443X004001 Panel clamp ring

A6443X004002 S/S Panel clamp ring

A5094X002007 Rear flange stainless steel - weld on

A5140X013021 Safety lens 100mm 97.5mm

AW001X111701 Safety lens 100mm 95.5mm

A5140X001119 Plastic lens 100mm 97.5mm

AW001X117564 Plastic lens 100mm 95.5mm

A5157X001082 Lens gasket-Flat 97.5mm

AW001X511734 Lens gasket-Lugs 95.5mm

A5182X002009 Triangular bezel for P 1779/2329

A5188X001021 Restrictor (press fit) 0.3mm, brass for models P 1778/1779



A5941X003001 Rubber protection shroud 100mm BLUE

A6240X004055 Front bezel standard S/S

A6527X016003 S/S Case with 3 hole rear flange attached

A6626X001067 Maximum indicating pointer & lens


63 mm Accessories - Model P1453/P1454/P2032/P2033

100 mm Accessories - Model P1778/P1779/P2325/P2329

A6527X016003

A5094X002007

A6626X001067

Accessories

39

Gauge Adapter & Snubbers

Model Description

AW000X608912 Standard pointer for 100mm dual scale gauges

A76344X001243 Standard pointer for 100mm single scale gauges

AEW90X000744 Adjustable pointer for 100mm gauges

A6344X006024 Adjustable pointer for 130mm, (P2119) gauges

AEW90X000749 Adjustable pointer for 160mm, (P2316) gauges

Pointers

Glycerine

GLYC85-01 L Glycerol 85% x 1 litre



Adapters

1224.18B.14B Brass 1/8” BSPT female to 1/4” BSPT male





1224.38B.12N Brass 3/8” BSPT female to 1/2” NPT male

1272.14B.18B Brass 1/4” BSPT female to 1/8”BSPT male

1272.38B.14B Brass 3/8”BSPT female to 1/4”BSPT male

SI/GA-F4R-M4-6K-H 316 S/S Adapter, 1/4”BSPT female, 1/4” NPT male, 6k rated

SI/GA-F4G-M4-10K-H 316 S/S Adapter, G1/4”BSPP female, 1/4” NPT male, 10k rated

SI/GA-F8-M4-10K-H 316 S/S Adapter, 1/2”NPT female, 1/4” NPT male, 10k rated

SI/GA-F8-M4-15K-H 316 S/S Adapter, 1/2”NPT female, 1/4” NPT male, 15k rated

A1302X010030 Brass G1/4” BSPP female to 1/4”NPT male

A1302X010009 Brass G1/4”BSPT female to G1/2” BSPP male - 600bar

A1302X010007 Brass G1/2” BSPP female to G1/4” BSPP male - 600bar

1220.12B.34B Brass 1/2”BSPT female to 3/4”BSPT male

1220.14B.14N Stainless Steel 316 G1/4”BSPP female to 1/4”NPTM. Rating 4900 psi

1220.12N.14N Stainless Steel 316 1/2”NPT female to 1/4”NPT male

1220.12B.12N Stainless Steel 316 G1/2”BSPP female - 1/2”NPT male

A1302X010021 Brass G1/8” Female to G1/4” male

A1302X010032 Brass G3/8” Female to G1/4” male

A1302X010033 Brass G1/2” male to G3/8” female

Accessories

40

100 & 160 mm Dials and Needle Valves by tecsis®

Model Description Model Description

A6799X102360 -1..0 bar A6799X102361 -100...kPa

A6799X104357 -1..1.5 bar

A6799X104358 - 1..3 bar

A6799X104359 -1..5 bar

A6799X104360 -1..9 bar A6799-100..+900 kPa -100..+900 kPa

A6799X102342 0..1 bar A6799X102362 0..100 kPa

A6799X104384 0..1.6 bar A6799X102363 0..150 kPa

A6799X102357 0..2.5 bar A6799X102364 0..250 kPa

A6799X104308 0..4 bar A6799X102365 0..400 kPa

A6799X102332 0..6 bar A6799X102366 0..600 kPa

A6799X102381 0..8 bar A6799X102367 0..800 kPa

A6799X102358 0..10 bar A6799X102368 0..1000 kPa

A6799X104229 0..16 bar A6799X102391 0..1600 kPa

A6799X102331 0..25 bar A6799X102370 0..2500 kPa

A6799X102359 0..40 bar A6799X102371 0..4000 kPa

A6799X102341 0..60 bar A6799X102372 0..6000 kPa

A6799 100 bar 0..100 bar A6799X102373 0..10 000 kPa

A6799X104348 0..160 bar A6799X102374 0..16 000 kPa

A6799X104279 0..250 bar A6799X102375 0..25 000 kPa

A6799X102327 0..400 bar A6799X102376 0..40 000 kPa

A6799X104373 0..600 bar A6799X102377 0..60 000 kPa

A6799X102378 0.. 100 000 kPa

Single Bar

160 mm Dual Scale Bar/Psi Dials

A6799X104344 0..100 bar/1450 psi

A6799X102387 0..160 bar/2300 psi

A6799X102379 0..250 bar/3600 psi

A6799X102380 0..400 bar/5800 psi

Single kPa

Needle Valves

P1M/M2W2TB0XH 1/4”NPT male/female, PTFE seals, 6m bleed port, T bar handle, 6K rated, 316 SS

P1M/M3W3TB0XH 3/8”NPT male/female, PTFE seals, 6m bleed port, T bar handle, 6K rated, 316 SS

P1M/M4W4TB0XEH 1/2”NPT male/female, PTFE seals, 6m bleed port, T bar handle, 10K rated, 316 SS

100 mm Single Bar/Psi Dials

Accessories

41

Syphon, Snubbers, Cooling Towers & Diaphragm Seals

BD201-2N20260 Bolt seal 40 bar

BD101-2N20260 Bolt seal 160 bar

RAP-DS-VAC 6 - Bolt diaphragm seal , 1/2”NPT inst. conn, 1/2”NPT process conn, all 316 S/S, suitable for

vacuum

Bolt Together Diaphragm Seals, (Diaphragm Welded to Top Housing). All 316 S/S

Welded “Mono– Block” Diaphragm Seals. All 316 S/S

BD040-2N06 Weld seal 16 bar

D041-09 Welded “Mono block” Diaphragm Seal, 1/2” NPT Process connection, all S/S, 16..250bar

High Pressure Diaphragm Seals (Diaphragm welded to top housing). All 316 S/S

AMADS-125-1/2 Two piece, screwed, diaphragm welded to top housing, 1/2” NPT inst. & process

connection, 316 S/S, max pressure of 600bar

BD055-2X16/52898-06 Plush Diaphragm Seal, 1/2” NPT instrument conn, G1” BSPP process conn, all 316 S/S,

min pressure 0-25 bar, max pressure 250 bar

BD055-2X1C/52900-05 Plush Diaphragm Seal, 1/2” NPT instrument conn, G2” BSPP process conn, all 316 S/S,

max pressure 40 bar

R Gauge Saver R1 1” BSPT Gauge Saver, 3/8”BSPT female gauge connection

R Gauge Saver R1 1600 1.5”BSPT Gauge Saver, 3/8”BSPT female gauge connection

Grout Gauge Saver

Flush Front Diaphragm, Plug Seals. All 316 S/S

Snubbers

A1303X060001 Brass G1/2”BSPP female - G1/2”BSPP male

A1303X060004 Brass G1/4” BSPP female - G1/4”BSPP male

A1303X060003 Stainless Steel 316, G1/2” BSPPF - G1/2” BSPPM

A1303X060006 Stainless Steel 316, 1/2”NPTF - 1/2”NPTM

Heat Neck Cooling Towers 316 S/S

AZM16X031001 G1/2” BSPP-G1/2”BSPP, 316 S/S

AZM16X031004 1/2”NPT - 1/2”NPT, 316 S/S

SY-2-G-2-2-2 316 S/S Syphon, 1/2”NPT M/F, max pressure 100/160/300 bar up to 400/300/120 C

Syphon

Force

42

Load Cells, Tension & Compression Products by tecsis®

As a distributor for tecsis® force products, GTS can supply custom built, high accuracy, load cells and force sensors, in a

number of configurations. These products are used in a wide range of applications such as weighing control, process

control, chemical industries, food industries, medical equipment and industrial measurements.

Single Point Load

Cells

Platform load cells are applied in small and middle sized platform scales in

weighing. Often, these sensors are centre load compensated, so that even

with off-centre loading of large carriers the measurement result will be

correct.

Tension/ Compression

Force Transducers

Tension/Compression force transducers are used to measure tension and

compression forces. For application with limited spacer or to measure small

forces they are used in miniature design.

Load and shear beams Load and shear beams are used to measure the weight of small and medium

sized containers. Often they are also applied to measure forces.

Load pins

In stage construction, construction machinery, cranes or the other large lifting

equipment:

By virtue of their design, load pins from tecsis® can be integrated directly in

the flow of force, taking up very little space. For example, as a direct

replacement of retaining bolts in fork bearing. Hence, loads pins are the

perfect solution for different geometries. Even when upgrading existing

structures.

Proven thin-film technology used in the so-called bolts plays its part in this.

Compression Force

Transducers

Its small dimensions and solids design this load cell made of high grade

stainless steel can be used in the laboratory and testing sector in the most

diverse branches of industry.

Special Force

Transducers

Shackle Load Cells combine the benefits of a shackle and a load pin.

They allow to measure loads without the need to install further elements.

tecsis® shackle load cells convince by high accuracy and ease of use.

Pressure Switches

43

Electronic Pressure Switch with Display by tecsis®

S2400B101403 -1..2 bar/ psi

S2400B045403 -1..5 bar/ psi

S2400B047403 -1..10 bar/psi

S2400B071403 0..2 bar/ psi

S2400B121403 0..5 bar/ psi

S2400B075403 0..10 bar/ psi

S2400B077403 0..20 bar/ psi

S2400B785403 0..50 bar/ psi

S2400B081403 0..100 bar/ psi

S2400B082403 0..160 bar/ psi

S2400B084403 0..250 bar/ psi

S2400B086403 0..400 bar/ psi

S2400B087403 0..600 bar/ psi

S2400B104403 0..700 bar/ psi

Model P2400 Electronic Pressure Switch with programmable display in bar or psi 2 x Switch Outputs-Adjustable, Hysteresis-Adjustable 100% of full scale, G1/4 “ BSPP, IP65

Model Description

Model S2410 Electronic Pressure Switch with switch & 4-20Ma Output & Display.

1 x Switch Outputs-Adjustable, 1 x 4-20mA Output, Hysteresis-Adjustable 100% of full scale,

G1/4”BSPP, IP65

S2410B101003 -1..2 bar/ psi

S2410B045003 -1..5 bar/ psi

S2410B047003 -1..10 bar/ psi

S2410B071003 0..2 bar/ psi

S2410B121003 0..5 bar/ psi

S2410B075003 0..10 bar/ psi

S2410B077003 0..20 bar/ psi

S2410B785003 0..50 bar/ psi

S2410B081003 0..100 bar/ psi

S2410B082003 0..160 bar/ psi

S2410B084003 0..250 bar/ psi

S2410B086003 0..400 bar/ psi

S2410B087003 0..600 bar/ psi

S2410B104003 0..700 bar/ psi

EZE53X011010 Straight connector M12x1, 4 pin with 2m cable

EZE53X011011 Angular connector M12x1, 4 pin with 2m cable

AZM90X101010 Cover for models: S2400/S2410/S2420/S5400/S5410/IP67

Digital Pressure Switch SC400 / SC410 / SC420 with measurement display and scalable analogy output.

Model S2420

2 x Switch + 1x

Analogue Outputs

Also available!

Datasheet DE 776

Datasheet DE 776

Pressure Switches

44

Pressure Switches - Engine & 316 S/S Switches

0166-404-04-3-016 Adjustable 0.1-1 bar, 1/8”NPT, normally CLOSED, FKM diaphragm, zinc plated steel body,

over range 300 bar.

0166-408-04-3-032 Adjustable 1-10 bar, 1/8”NPT, normally CLOSED, FKM diaphragm, zinc plated steel body,

over range 300 bar.

0110-408-04-3-032 Adjustable 1-10 bar, normally CLOSED, 1/8”NPT male thread, FKM diaphragm, deutsche

DT04-2P plug, over range 300 bar.

Adjustable Pressure Switches

These mechanical pressure switches are available with NO, NC or SPDT contacts. The pressure switches provide highest

quality, stable switching points during the whole service life, an outstanding reliability even at high temperatures.

Normally Closed 1/8”NPT, Zinc Plated Steel Body, NBR Diaphragm, 42V/2A

Normally Open 1/8”NPT, Zinc Plated Steel Body, NBR Diaphragm, 42V/2A

0166-404-04-3-016 Adjustable 0.1-1 bar, 1/8”NPT, normally OPEN, FKM diaphragm, zinc plated steel body,

over range 300 bar.

0166-408-04-3-032 Adjustable 1-10 bar, 1/8”NPT, normally OPEN, FKM diaphragm, zinc plated steel body,

over range 300 bar.

0110-408-04-3-032 Adjustable 0.1-1 bar, normally OPEN, 1/8”NPT male thread, FKM diaphragm, deutsche DT04-2P

plug, over range 300 bar.

0166-1-1-66-621-0 SUCO rubber protection boot.

AZM90X101004 Rubber protection boot to suit.

316 Stainless Steel Pressure Switches

Change-Over

SPTD

Contact, Adjustable, 316 Stainless Steel, NBR Diaphragm, G1/4” BSPP,

with Protective Boot

GTSAPA-1B-4GCHC4 Adjustable 20-200 kPa/0.2-2 bar/3-29 psi, max pressure 24 bar, 316 S/S body, G1/4BSPP

with din plug elec. conn.

GTSBPA-1-4GCHC4 Adjustable 35-2060 kPa/0.35-20 bar/5-300 psi, max pressure 600 bar, 316 S/S body, G1/4BSPP


GTSBPA-1A-4GCHC4 Adjustable 450-2000 kPa/4.5-20 bar/65-300 psi, max pressure 600 bar, 316 S/S body, G1/4BSPP


Vacuum/ Compound Pressure Switches

S4412B114001 Mechanical vacuum switch, SPDT, adjustable-0.85..+1 bar, G1/4 BSPP process connection

with din plug, overload limit 20 bar.

Model 0166

Model 0110

Pressure Switches

45

Pressure Switches - Hydraulic by tecsis®

S4250B071001 Adjustable 0.2..2 bar - overload limit 60 bar

S4250B144001 Adjustable 0.5..8 bar - overload limit 60 bar

S4250B076001 Adjustable 1..16 bar - overload limit 60 bar








S4230B083001 50..200 bar - overload limit 200 bar

Adjustable Hysteresis Pressure Switches

Mechanical Pressure Switches with a membrane or piston sensing element and one switched output with changeover

contact and adjustable hysteresis for converting pneumatic and hydraulic pressure into an electrical switching signal.

Change-Over SPDT

Change– Over contact, Adjustable, Zinc Plated Steel Body, NBR Diaphragm, G1/4” BSPP, 28VDC/2A, 250VAC/4A, IP65, Din Plug

Differential Pressure Switches

OIMZ3DF2H01A8S11 Differential pressure switches, adjustable 0.1-1 bar, 5A, 250VAC, 316S/S & Teflon wetted

parts, max pressure 12 bar, G1/4”BSPP female connections

EZE41X011003 tecsis DIN plug EN 17301-803 from A

A5157X004002 Silicon white washer to suit tecsis DIN plug

Datasheet AE 781

Pressure Transmitters

46

Models P3251 & P3297 by tecsis®

P3251B063001 0..0,1bar, G1”BSPP

P3251B064001 0..0,16bar, G1”BSPP

P3251B065001 0..0,25bar, G1”BSPP

P3251B066001 0..0,4bar, G1”BSPP

P3251B067001 0..0,6bar, G1”BSPP

P3251B069001 0..1bar, G1”BSPP

P3251B070001 0..1,6bar, G1”BSPP

P3251B045001 -1..+5bar compound G1/2” BSPP

P3251B072001 0..2,5bar, G1/2”BSPP conn.

P3251B073001 0..4bar, G1/2”BSPP conn.

P3251B074001 0..6bar, G1/2”BSPP conn.

P3251B075001 0..10bar, G1/2”BSPP conn

P3251B078001 0..25bar, G1/2”BSPP conn.

Model Description

AZM23X031004 G1” BSPP weld-on adapter for front flush diaphragm.

AZM23X031006 G1/2” BSPP weld-on adapter for front flush diaphragm.

Adapters

Datasheet DE701

P3297B016001 P3297B016002 -1..0 bar Vacuum

P3297B045081 P3297B045002 -1..0..+5 bar Compound

P3297B069001 P3297B069002 0..1 bar

P3297B070001 P3297B070002 0..1,6 bar

P3297B072001 P3297B072002 0..2,5 bar

P3297B073001 P3297B073002 0..4 bar

P3297B074001 P3297B074002 0..6 bar

P3297B075001 P3297B075002 0..10 bar

P3297B076001 P3297B076002 0..16 bar

P3297B078001 P3297B078002 0..25 bar

P3297B079001 P3297B079002 0..40 bar

P3297B080001 P3297B080002 0..60 bar

P3297B081001 P3297B081002 0..100 bar

P3297B082001 P3297B082002 0..160 bar

P3297B084001 P3297B084002 0..250 bar

P3297B086001 P3297B086002 0..400 bar

P3297B087001 P3297B087002 0..600 bar

P3297B088001 P3297B088002 0..1000 bar

Datasheet DE708

M12 4pin Plug

Special Option

Model P3297 OEM 4-20mA Output, G1/4” BSPP conn. 316 S/S, 1% FSA

Model P3251 4..20mA output, G1”BSPP/G1/2”BSPP conn. 316 S/S Front Flush Diaphragm,

0.5% Full Scale Accuracy, 316 S/S Wetted Parts

Din Plug M12 x 4 pin


47

Model P3278 by tecsis®

P3278B016001 -1..0 bar Vacuum

P3278B043001 -1..+1,5 bar compound

P327BB045001 -1..+5 bar compound

P3278B063001 0..0,1 bar

P3278B065001 0..0,25 bar

P3278B067001 0..0,6 bar

P3278B069001 0..1 bar

P3278B070001 0..1,6 bar

P3278B072001 0..2,5 bar

P3278B073001 0..4 bar

P3278B074001 0..6 bar

P3278B075001 0..10 bar

P3278B076001 0..16 bar

P3278B078001 0..25 bar

P3278B079601 0..40 bar

P3278B080601 0..60 bar

P3278B081601 0..100 bar

P3278B082601 0..160 bar

P3278B084601 0..250 bar

P3278B086601 0..400 bar

P3278B087601 0..600 bar

P3278B088601 0..1000 bar

Model P3278 heavy duty 4..20mA output, G1/2” BSPP conn. S/S, 0.5% full scale accuracy, 316S/S wetted parts.

Model Description

Pressure Ranges Available up to 8000 bar

E1999X100001

Attachable LCD digital indicator without contacts, LCD4 digit display, accuracy +/-0.2% +/-1 digit,

freely programmable range adjustment, 4..20mA signal sensors, power supply from loop current.

Datasheet DE733.

E199X500001

Panel Mount LED indicator, 4 digit, freely programmable range adjustment, 2 transistor output n

switching, accuracy +/-0.2%+/-1 digit, sensor signal 0..20mA, 4..20mA, 0..1VDC, 0..10VDC.

Datasheet DE733.

Datasheet DE733

Datasheet DE7000

Intrinsically Safe & Explosion Proof Hazardous Area Transmitters

Model PEX10, PEX11, PEX13, PEX14, PEX15, PEX17, PEX18

Pressure sensors industrial Heavy Duty, VAC-8000bar Ex ia I/IIC T6 according to APEX and

Ex d II CT4-T6 acc. ATEX with internal diaphragm, with front flush diaphragm for gauge and

absolute pressure, with DIN plug or field housing, ULTRA HIGH PRESSURE also available,

accuracy 0.25% and 0.5% standard output: 4..20mA, 2 - wire system.


48

Model TDWLB by Bluetooth Transmitters ®

The first Bluetooth® certified wireless pressure transducer with long battery life and patent pending design makes the

Transducers Direct CirrusSense™ TDWLB a perfect fit for many applications for Industrial and Home Automation.

Download the free app, install the transducer and wirelessly connect – no confusing wiring to figure out. From HVAC in

marine, campers, motorhomes, residential and commercial applications to water, hydraulic, irrigation, pools, medical

and sprinkler systems or anywhere you need to monitor pressure without the need of wires.

Because it is built on TD1000 proprietary technology, the TDWLB ensures high quality and high accuracy with quick

delivery, and low cost.

TDWLB-100-0050-13 Bluetooth 50 psi, 1/4”BSPP thread








TDWLB-100-010k-13 Bluetooth 10000 psi, 1/4”BSPP thread

Bluetooth Pressure Transmitters

Model Description

Bearing Oil Separator Sight Glass (Sludge Cup)

Simple to install & fits to the underside of the pump housing/sump

TDWLB-BAT-1 Bluetooth Battery Pack

Bearing Oil Separator

Bearing Oil Separator - Sight Glass

Bearing Oil Separator

Model Description

GTSOIL316 ½” Nipple x ¼” Outlet Ball Valve 316 S/S End Caps

GTSOILA ½” Nipple x ¼” Outlet Ball Valve Aluminium End Caps

SI/GA-F4G-M4-10K-H 316 S/S Adapter, G1/4” BSPP Female, 1/4” NPT Male, 10K pressure rated

Adapters

Temperature

49

Temperature Switches by tecsis®

S5400C621001 -50..+125degC, 50mm stem

S5400C621002 -50..+125degC, 100mm stem

S5400C621003 -50..+125degC, 160mm stem

S5400C621004 -50..+125degC, 200mm stem

Temperature switches are used in signalizing, monitoring and controlling of heating, and cooling circuits in machines,

compressors and engines.

Model Description

S5400 Range 2 x Switch Outputs - Adjustable, G1/2”BSPP, IP65

S5410 Range 1 x Switch Outputs - Adjustable, 1 x 4-20 mA Output, G1/2” BSPP, IP65

S5410C621001 -50..+125degC, 50mm stem

S5410C621002 -50..+125degC, 100mm stem

S5410C621003 -50..+125degC, 160mm stem

S5410C621004 -50..+125degC, 200mm stem

AZM90X101010 Cover for S2400 & S5400 models

Model S2420

GTSTS-050-NC-15mm Switch point 50degC normally closed, 1/8”NPT - with boot

GTSTS-050-NO-15mm Switch point 50degC normally open, 1/8”NPT - with boot














GTSTS Bi-Metal Temperature Switch, 1/8”NPT

V320.050 Brass 1/8” NPT female - 1/4” NPT Male




V320.054 Brass 1/8” NPT female - M14 Male



V320 Adapters

Temperature

50

Temperature Transmitters by tecsis®

The PT Compact USB is an additional member if the tecsis® PT Compact Series. The measuring range can be programmed

according to the customers demands with especially developed software. Programming - Kits are not needed.

GTS programmable range from –50°C to +200°C. (minimum span of 35°C) and high temperature model for

temperatures up to +600°C, which includes a 100mm neck tube. The output signal of the PT Compact USB is an analogue

4..20 mA signal.

TEU11 Description

TEU11X221010 Temp. trans., 4-20 mA output, 50 mm stem, G1/2”BSPP




T4202C409001 V– Shaped Thermometer 0-120degC, 110 mm, brass, G1/2” BSPP bottom connection,

40 mm stem length


63 mm stem length


63 mm stem length


100 mm stem length

V ’ Shaped Machine Thermometers by tecsis®

Model Description

T4780C409030

Temperature Gauge 60mm, 0…+120degC, panel mounting with clamp, 2 x change - over

switches fixed at 100°C+ 115°C, 3m capillary, male nut with thermowell, G1/2” BSPP, 50 mm

insertion length

Glass Thermometers for machines are used for temperature measurement in gaseous and liquid media and vapours in pipelines and tanks.

Datasheet DE1129

Temperature

51

Temperature Gauges by tecsis®

These types of thermometers have been developed for industrial applications. Case, ring and stem are made of stainless

steel.

The measuring element of the bimetal thermometer is a quick reacting bimetal coil. It is manufactured from two

cold-welded metal strips with different thermal expansion coefficients and rotates in proportion to temperature.

The rotary movement is conveyed to the pointer with low friction.

TM187C403002 Temperature Gauge 80 mm dial, -30..+50degC, 60 mm stem G1/2”BSPP rear conn. c/w thermowell

TM187C409002 Temperature Gauge 80 mm dial, 0..120degC, 60 mm stem G1/2”BSPP rear conn. c/w thermowell

TM188C411003 Temperature Gauge 100 mm dial, 0..200degC, 100 mm stem G1/2”BSPP rear conn. c/w thermowell

Model Description

Bimetal Thermometers

TM207C201006 Temperature Gauge 80 mm dial, -20..+40degC, 100 mm x 6 mm stem, rear 1/2”NPT sliding compression fitting

TM207C206006 Temperature Gauge 80 mm dial, 0..+60degC, 100 mm x 6 mm stem, rear 1/2”NPT sliding compression fitting

TM207C110511 Temperature Gauge 80 mm dial, -10..+110degC, 63 mm stem x 6mm stem, G1/2”BSPP

TM207C410021 Temperature Gauge 80 mm dial, 0..160degC, 63 mm x 8 mm stem, G1/2”BSPP rear conn. c/w thermowell

TM208C412513 Temperature Gauge 100 mm dial, 0..250degC, 500 mm x 8 mm stem, 1/2”BSPP sliding rear conn

TM208C412514 Temperature Gauge 100 mm dial, 0..250degC, 300 mm x 8 mm stem, 1/2”BSPT sliding rear conn

Datasheet DE1015

Datasheet DE1020

Datasheet DE1020

Brass

All Stainless Steel

Australian Agent for

352'8&7 *8,'( - hydair drives2-15 lpm, 1/2” spt female swivel brass ports. h627-007....

Documents