Front Clip-On Bracket Rear Metal Bracket .175 x .315 [4.4 x 8.0] (2x) .180 DIA. [4.6] 2.35 [59.7] .25 [6.4] .180 x .280 [4.6 x 7.1] .31 [8.0] 1.25 [31.8] .63 [15.9] .180 x .580 [4.6 x 14.7] 1.49 [37.8] 1.00 [25.4] .170 DIA [4.3] (7x) .50 [12.7] .25 [6.4] .88 [22.2] .21 [5.3] .79 [20.1] 1.91 [48.5] Self register stop Specications Rar Brak Slide Cabinet Member Fr Brak T ab Figure 2 Rear Metal Face Frame Bracket Front Clip-On Bracket Figure 3 Mounting Strip Face Frame Disconnect Lever Drawer Member Set Back 3/16" [4.8] 1 ¼" [31.8] 7/16" [11.1] Figure 1 ACCURIDE INTERNATIONAL INC. 12311 Shoemaker Avenue Santa Fe Springs, CA 90670 TEL (562) 903-0200 FAX (562) 903-0208 www.accuride.com Manufacturing, Engineering, and Sales United States • Germany • Japan • Mexico • United Kingdom • China ApplicAtions: Converts 3832EC for face frame mounting. Front and rear brackets easily snap on the existing slide. * Rear bracket has a 2" (50.8) adjustment range. No tools needed. th rdu vrd by U.s. (5,904,412) ad varu frg a ud ad/r dg. Aahg h Brak First, separate slide members by actuating the disconnect lever. Brackets are attached to cabinet (large) member. Fr Brak 1. Position bracket on slide so tab engages second hole on slide. Bracket flanges will face inboard. See Figure 1. 2. Rotate bracket until it snap s in place, flush with front. Rar Brak 1. Push rear bracket onto the slide. See Figure 1. Mu sd cab 1. Secure a 3/4" x 2" ve rtical mounting strip to the rear wall or cabinet back for each slide. 2. Position the front bracket on the face fra me opening and move it forward until the self-register stop hits the inside of the face frame opening. Install screw in the slotted mounting hole. Do not tighten screw completely at this time. 3. Extend th e re ar br acket until it contacts the r ear v ertical mounting strip. Check that both cabinet members are vertically and horizontally parallel. Mount the rear bracket using the two vertical slots. Make any necessary adjustment. See Figure 2. 4. Secure the r ear bracket with a screw in round hole. Secure the front bracket with a screw in the round hole of the bracket. Tighten the original screw. See Figure 2. Mu sd Drawr 1. Install drawer member through vertical slots. 2. Insert drawer member making sure ball be aring retainers are fully forward. Close drawer completely. 3. Adjust v ertical position and install 2 mor e screw s in round holes after free movement is achieved. See Figure 3. Order brackets in a k or in buk. Mounting screws are included. Brackets are available in zinc finish only. This face frame kit is compatible with models 3832CDO, 3832CHDSC, 3832CSC, 3832C, 3834CSC, 3834C, 3832CTR and 3832CHDTR. Each kit contains two front and two rear brackets, and installation sheet. Order one kit per pair of sli des ordered. Bulk for model 3832EC order two front (P/N 4010-0516-CE) and two rear (P/N 4010-0668-CE) brackets per pair of slides. Front and rear face frame brackets: Cold rolled steel RoHS compliant note: Specifications, materials, prices, terms, and delivery are subject to change without notice For the most current technical information visit www.aurd.m http://tinyurl.com/yjzpf6a F ACE FRAME CONVERSION KIT Part Number 4180-0705-XE Fr U Wh sd Md 3832ec K a b ud wh d md: 3832cDo, 3832cHDsc, 3832csc, 3832c, 3834csc, 3834c, 3832ctR ad 3832cHDtR Installation Instructions See 3832EC technical sheet for additional slide details. Specifications Ordering/Packaging Information Copyright © 2009 Accuride International Inc. 3700-9533(1228 )-MK139-R1-061 1
