4

Materials Required:P.V.A. Craft Adhesive.

Scissors or Knife and Cutting Mat.

Mini Fixer Pads or Silicone Adhesive.

3D Découpage Paper: DC330 to DC337.

Card Mount:For DC330 to DC333 & DC335 use AP02U/G.For DC334, DC336 & DC337 use AP48U (DC334 is shown in Hammer Pale Blue withwhite sticker borderlines from XL500U added).

How To Make The Cards:The first layer of each design is a full print.

For DC334 & DC336 mount the full print intothe card before working the other layers onto it.

Mount all the other designs into the card after completing all the layers as bits of thedesign go behind the aperture. For some of these areas you need to keep the white paperattached, this is shown by the grey areas aroundthe pictures.

White gaps in the diagrams show where tocut between the pieces, blue lines show glue.

1. Cut out the parts shown. Cut betweenall the feet and shape them up and downaccording to the way they are painted.Sticky fix into place.

2. Cut out all the parts shown. Cut the toprow of heads and arms away from themiddle row. Sticky fix all top row into

place gluing the arms and heads at the bot-tom. Cut the heads away from the ‘well’cards. Sticky fix each middle row head intoplace and glue each as shown. Cut the‘well’ cards away from the bottom row ofheads and cut into single letters. Sticky fixeach letter into place and glue as shown.Cut the bottom row of heads from the let-

ters and cut into individual letters. Stickyfix and glue the heads and then each letter.

3. Cut out all the parts shown. Curve thetop row of heads so the chins curve downand sticky fix into place tucking the extrabits under the previous layer. Sticky fix allthe paws into place.

DC336

3D Découpage

5

1. Cut out the parts shown. Cutby the back of the front tyre asshown, sticky fix all parts intoplace and glue the signs and byfront tyre as shown.

2. Cut out the parts shown.Sticky fix tyres into place tuck-ing the little extra bit under the

previous layer. Sticky fix thetwo small bikes into place. Cutthe main bike as shown, lift thehandlebar, sticky fix into placeand glue the trim at back andfront where shown.

3. Cut out the parts shown andsticky fix into place.

DC337

1. Cut out the parts shown and sticky fix into place.

2. Cut out the parts shown and sticky fix all the singleflowers into place. Cut between the yellow flower andleaf and the central leaf as shown, sticky fix into placeand gently lift the cut leaves.

3. Cut out the parts shown and cut into single flowers.Cut between each petal on each flower and gentlycurve the petals to a natural shape before sticky fixinginto place.

DC334

1. Cut out the parts shownand sticky fix into place.Glue the bottom and sideedges as shown.

2. Cut out the parts shown,sticky fix into place andglue the base and sides asshown.

DC333

3. Cut out the parts shownand cut the giraffes fromthe hills. Small giraffe, cutoff head, sticky fix bodyinto place and glue at top of neck. Sticky fix head intoplace. Large giraffe, Cut offhead and by both legs asshown. Bend the tummy

down and sticky fix bodyinto place gluing neck asshown. Sticky fix head intoplace. Sticky fix hills intoplace and glue the sidesand bottom edges.

6

1. Cut out parts shown and sticky fix all the grass and leaves into place gluing where shown. Cut between the cub and thelion’s leg and the lion’s leg and tail as shown. Sticky fix tail intoplace and glue top. Sticky fix lions into place and glue paw where shown.

3. Cut out partsshown and stickyfix into place.

2. Cut out parts shown. On the cub, cut between legs and chest,curve the chest down and sticky fix cub into place. On the lion,cut between the mane and paws, sticky fix both paws into placeand glue as shown. Sticky fix head into place.

1. Cut out the parts shown. Cut the leaves from the tiger’s pawthen sticky fix all the leaves and grass into place gluing eachwhere shown. Cut between the leaf and tiger, between the tailand leg then between both legs as shown. Curve the top back legup a little then sticky fix tigers into place gluing leaf as shown.

2. Cut out parts shown and sticky fix all leaves and tiger’s tailinto place and glue the ends of each. Cut between tummy andback leg on small tiger, curve the leg down at the cut and stickyfix into place. Cut above the large tiger’s leg as shown, curvechest down a little at the cut and sticky fix into place.

3. Cut out the parts shown. Cut around the nose and by the ears as shown on bothtigers heads. Curve the headsdown by the ears and gently lift the ears a little. Curve thefaces down around the cutnoses and sticky fix into place.

DC330 DC331

7

1. Cut out parts shown and sticky fix into place. Glue the water at the side and bottom edge.

2. Cut out the parts shown then cut between the two elephants.On the big ele-phant, cut by legas shown. Stickyfix into place andglue the tummywhere shown. Onthe baby elephant,cut the two centrelegs away, stickyfix each into placeand glue the tops.Cut by the legsand curve thetummy downbefore sticky fix-ing into place.

1. Cut out the parts shownand cut between the left potand door as shown. Carefullycut out and save the orangedaisy and the yellow flowerfrom the bouquet. Curvedown the door above the cut,sticky fix into place and gluethe sides of both pots.

3. Cut out the parts shownand sticky fix the pot, leavesand ear into place gluing potand ear as shown. Cut thearm from the flowers, stickyfix into place and glue whereshown. Cut by the ribbon tailas shown, sticky fix bouquetinto place and lift the tail bythe cut. Sticky fix the twoflowers cut earlier into place.

2. Cut out the parts shownand sticky fix both plants and pots into place, gluingboth pots as shown. Cutbelow the arm holding thebouquet, cut between thelegs, between tummy and leg then tummy and arm.Place a stack of two fixerpads on the bouquet hand,curve the tummy down at the cuts, sticky fix into placeand glue foot where shown.

DC335

3. Cut out theparts shown. Bigelephant, cutaround the earand by mouth andtrunk as shown.Sticky fix intoplace and gluetrunk and facewhere shown.Baby elephant, cut around ear,sticky fix intoplace and glue byeye as shown.

DC332

Hello,

We hope you enjoy this free article taken from a back issue of theCraft Creations Magazine. You may hand make copies of the card(s)featured in this project, to give away or sell, as many times as youlike. You may not use the project, text, pattern or pictures for anyother purpose nor make the project using any automated process.

All the free articles available for download on our web site are atleast one year old. If you want the latest projects, designer profiles,gallery pages and more, then you need to subscribe to the quarterlyCraft Creations Magazine.

Subscription Benefits:

* A free gift with every issue.

* 10% off every order placed with Craft Creations*.

* £2.50 off post and packing on orders over £20*.

* Prize competition in every issue.

* New product information.

You can subscribe to the quarterly Craft Creations Magazine or purchase any of the back issues from our online shop.

* All Craft Creations Magazine subscribers will receive an additional 10% discount off theirorders during their subscription period only. Subscribers will also receive £2.50 off post andpacking on orders over £20 (after discount). These benefits are not applicable on certain itemssuch as: Magazine Subscriptions, Gift Vouchers, Products already on Promotion, Special Offersor 'SPOF' packs and cannot be combined with any other vouchers or offers.

Craft Creations LimitedIngersoll House, Delamare Road, Cheshunt, Hertfordshire, EN8 9HD, England.

Tel: 01992 781900 Fax: 01992 634339

The details above are correct as of 1st April 2007, but are subject to change without prior notice.