MOSHELL NOTES – HOW TOTo read MCPA temp

Cabx (to check RBS status) lhsh 010200/port_0_dev_13 mcpaBoard temp lhsh 010200/port_0_dev_13 help lhsh 010200/port_0_dev_13 restart (if need to restart)

TELNET commands should MOSHELL hang due to GPBtelnet IP addcv cucv lscv mkcv setrestartObj me

To check pm counters for E1

In RXI pr atmport=ms-x-y get <proxy> lpget Subrack=MS,Slot=x,PlugInUnit=1,Etm1=1,E1PhysPathTerm=ppy

To check E1-MS port in RXI (add E1 for RBS)

In RNC st <sitename>

get <proxy> iub - look for RBS ID

In RXI

pr .<rbs ID> eg. pr .0095 lk <proxy> st atmport=ms-x-y bl lget ms-2-2 (then check iub number with STR printout – see tally or not) reservedBy Aal2PathVccTp=b0001a2 <----- iub # = 0001 to deblock E1 port in RXI lst slot=12.*31 lst Slot=16.*Vc12Ttp=14

ldeb Slot=16.*Vc12Ttp=14 - (Example MS-16-14)

In RBS (when port is ready but E1 not pull through yet – so that no alarm) pr atmport get <proxy> ie. get 1345 lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2

set <proxy> administrativeState 0 (to lock the 2nd physical port)

set 194 administrativeState 0 (to lock the 2nd physical port)

To remove RBS, Utrancell & IubLink in RNC

Site RNCKLCC01IDR1BU already exists – remove it from OSSRC site folderAlso delete in subnetwork folder

lst <utrancell> eg. lst raza lst singmu ldel <utrancell>

lst .b<iub-no> eg. lst .b0095 (WARNING : Check other proxys) ldel .<iub-no> (WARNING : Exclude other proxys)

ldel tat1bu 22517 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=1 >>> Mo deleted 22518 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=2 >>> Mo deleted 22519 RncFunction=1,IubLink=Iub_TAT1BU,NbapCommon=1 >>> Mo deleted 22520 RncFunction=1,IubLink=Iub_TAT1BU,NbapDedicated=1 >>> Mo deleted Second round delete 22516 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynch=1 >>> Mo deleted Third round delete 22515 RncFunction=1,IubLink=Iub_TAT1BU >>> Mo deletedComplete 1st part (then comes the ldel .b322 ldel .vc322)

RNCTGEM01> lst .b14 Around 12 MOs for IUB (1E1) 060105-12:32:30 ======================================================================

============= Proxy Adm State Op. State MO ======================================================================

============= 3517 1 (ENABLED) TransportNetwork=1,AtmCrossConnection=b14ib 3518 1 (ENABLED) TransportNetwork=1,AtmCrossConnection=b14ia 3586 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14db 3587 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14da 3590 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14cb 3591 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14ca 3751 0 (DISABLED) TransportNetwork=1,Aal0TpVccTp=b14sb1 3761 0 (DISABLED) TransportNetwork=1,Aal0TpVccTp=b14sa1 4314 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14db 4316 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14da 4319 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14cb 4320 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14ca ======================================================================

============= Total: 12 MOs

Check UniSaal is it is reservedif Reserved (also means that you have not deleted the MOs from EMAS yet): operationalState 1 (ENABLED)reservedBy IubLink=Iub_TAT1BU,NbapDedicated=1uniSaalProfileId UniSaalProfile=win100lget unisaal.*b297

if not reserved (also if you have already deleted in EMAS): operationalState 1 (ENABLED)reservedBy uniSaalProfileId UniSaalProfile=win30

if Reserved: operationalState 1 (ENABLED)reservedBy IubLink=Iub_MAJAMU,NbapDedicated=1uniSaalProfileId UniSaalProfile=win100

lst .vc<iub-no> eg. lst .vc95 (WARNING : Check other proxys) ldel .vc<iub-no> (WARNING : Exclude other proxys) RNCTGEM01> lst .vc14 Around 10 MOs for IUB (1E1) 060105-12:30:49 ======================================================================

============= Proxy Adm State Op. State MO

===================================================================================

2972 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1437 2973 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1436 2974 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1435 2975 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1434 2976 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 3978 1 (ENABLED) TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 4187 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 4484 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1444 4485 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1443 4487 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1433 ======================================================================

============= Total: 10 MOs

From RNCs delete external utran relations lpr utranrelation=<sitename> ldel utranrelation=<sitename>

when confirmed (undo mode ON) ldel .b297it will be deleted in 2 stages 8404 TransportNetwork=1,AtmCrossConnection=b297ia >>> Mo deleted

8405 TransportNetwork=1,AtmCrossConnection=b297ib >>> Mo deleted 8406 TransportNetwork=1,Aal0TpVccTp=b297sa1 >>> Mo deleted 8407 TransportNetwork=1,Aal0TpVccTp=b297sb1 >>> Mo deletedFollowed by ldel .b297

8408 TransportNetwork=1,Aal5TpVccTp=b297ca >>> Mo deleted 8410 TransportNetwork=1,Aal5TpVccTp=b297cb >>> Mo deleted 8412 TransportNetwork=1,Aal5TpVccTp=b297da >>> Mo deleted 8414 TransportNetwork=1,Aal5TpVccTp=b297db >>> Mo deleted

Then DELETE the VC part ldel .vc297 4307 TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp101,VpcTp=1,VclTp=vc29732 >>> Mo deleted

4485 TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp101,VpcTp=1,VclTp=vc29732 >>> Mo deleted 6375 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29733 >>> Mo deleted 6376 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29735 >>> Mo deleted 6377 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29743 >>> Mo deleted 6378 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29744 >>> Mo deleted 6855 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29732 >>> Mo deleted 6856 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29734 >>> Mo deleted 6857 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29736 >>> Mo deleted 6858 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29737 >>> Mo deletedFINISH RNC part

To remove rbs in RXI

pr .b<iub-no>

RXIKLCC02> pr .b322 060608-14:35:25 10.78.0.97 6.1zc MOM-CELLO_4.3.2-3_5_1 ======================================================================

============= Proxy MO ======================================================================

============= 1724 TransportNetwork=1,Aal2PathVccTp=b322a1 3268 TransportNetwork=1,Aal2Sp=1,Aal2Ap=b322

3862 TransportNetwork=1,AtmCrossConnection=b322ib 3863 TransportNetwork=1,AtmCrossConnection=b322ia 3879 TransportNetwork=1,AtmCrossConnection=b322db 3880 TransportNetwork=1,AtmCrossConnection=b322da 3883 TransportNetwork=1,AtmCrossConnection=b322cb 3884 TransportNetwork=1,AtmCrossConnection=b322ca 4372 TransportNetwork=1,Aal5TpVccTp=b322qb 4373 TransportNetwork=1,Aal5TpVccTp=b322qa 4513 TransportNetwork=1,UniSaalTp=b322qb 4514 TransportNetwork=1,UniSaalTp=b322qa 4937 TransportNetwork=1,AtmCrossConnection=b322sb1 4940 TransportNetwork=1,AtmCrossConnection=b322sa1 ======================================================================

============= Total: 14 MOs

lk <proxy>

pr aal2routingcase 6012200500<rncid><iub-no> lget TransportNetwork=1,Aal2RoutingCase=601220050010297

RXIKLCC02> lget TransportNetwork=1,Aal2RoutingCase=601220050010297

060608-15:50:01 10.78.0.97 6.1zc MOM-CELLO_4.3.2-3_5_1==============================================================================

3195 TransportNetwork=1,Aal2RoutingCase=601220050010297

del <proxy>

then you can delete4513 TransportNetwork=1,UniSaalTp=b322qb >>> Mo deleted 4514 TransportNetwork=1,UniSaalTp=b322qa >>> Mo deleted

And then4372 TransportNetwork=1,Aal5TpVccTp=b322qb >>> Mo deleted 4373 TransportNetwork=1,Aal5TpVccTp=b322qa >>> Mo deleted

Then DELETE the VCldel .vc322

Deleting ...=================================================================================== 2172 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc32237 >>> Mo deleted 2173 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc32236 >>> Mo deleted 2174 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc32234 >>> Mo deleted 2175 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc32232 >>> Mo deleted 5240 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc32244 >>> Mo deleted 5241 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc32243 >>> Mo deleted 5244 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc32235 >>> Mo deleted 5245 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc32233 >>> Mo deleted===================================================================================Total: 8 MOs attempted, 8 MOs deleted

Then DELETE the .bldel .b29710 of 15 will succeed

Deleting ...===================================================================================

2302 TransportNetwork=1,AtmCrossConnection=b297sb1 >>> Mo deleted 2307 TransportNetwork=1,AtmCrossConnection=b297sa1 >>> Mo deleted 2463 TransportNetwork=1,AtmCrossConnection=b297ib >>> Mo deleted 2464 TransportNetwork=1,AtmCrossConnection=b297ia >>> Mo deleted 2476 TransportNetwork=1,AtmCrossConnection=b297db >>> Mo deleted 2477 TransportNetwork=1,AtmCrossConnection=b297da >>> Mo deleted 2483 TransportNetwork=1,AtmCrossConnection=b297cb >>> Mo deleted 2484 TransportNetwork=1,AtmCrossConnection=b297ca >>> Mo deletedTotal: 15 MOs attempted, 10 MOs deleted

Run again 3278 TransportNetwork=1,Aal2Sp=1,Aal2Ap=b297 >>> Mo deleted 3457 TransportNetwork=1,UniSaalTp=b297qb >>> Mo deleted 3459 TransportNetwork=1,UniSaalTp=b297qa >>> Mo deleted===================================================================================Total: 5 MOs attempted, 3 MOs deleted

Run again Deleting ...=================================================================================== 3094 TransportNetwork=1,Aal5TpVccTp=b297qb >>> Mo deleted 3095 TransportNetwork=1,Aal5TpVccTp=b297qa >>> Mo deleted===================================================================================Total: 2 MOs attempted, 2 MOs deleted

ATMPORT part (DELET ONLY THE RED PART)MAKE SURE 4354 TransportNetwork=1,AtmPort=MS-16-5 - remains

RXIKLCC02> lpr MS-16-5

060608-16:28:59 10.78.0.97 6.1zc MOM-CELLO_4.3.2-3_5_1===================================================================================Proxy MO=================================================================================== 2610 TransportNetwork=1,AtmPort=MS-16-59 2625 TransportNetwork=1,AtmPort=MS-16-58 2627 TransportNetwork=1,AtmPort=MS-16-57 2628 TransportNetwork=1,AtmPort=MS-16-56 2629 TransportNetwork=1,AtmPort=MS-16-55 2630 TransportNetwork=1,AtmPort=MS-16-54 2631 TransportNetwork=1,AtmPort=MS-16-53 2632 TransportNetwork=1,AtmPort=MS-16-52 2633 TransportNetwork=1,AtmPort=MS-16-51 2634 TransportNetwork=1,AtmPort=MS-16-50 4354 TransportNetwork=1,AtmPort=MS-16-5 4355 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1 4356 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1 4357 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc45 4358 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc44 4359 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc43 4360 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc39 4361 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc38 4362 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc37 4363 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc36 4364 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc35 4365 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc34 4366 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc33 4367 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc32

===================================================================================Total: 24 MOs

RXIKLCC02> rdel 4355

060608-16:30:00 10.78.0.97 6.1zc MOM-CELLO_4.3.2-3_5_1Recursive Delete following MOs ?============================================================================== 4355 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1==============================================================================Are you Sure [y/n] ? yLast MO: 5514. Loaded 12 MOs. Total: 5455 MOs.

060608-16:30:05 10.78.0.97 6.1zc MOM-CELLO_4.3.2-3_5_1Recursive Delete following MOs ?============================================================================== 5504 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc45 5505 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc44 5506 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc43 5507 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc39 5508 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc38 5509 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc37 5510 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc36 5511 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc35 5512 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc34 5513 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc33 5514 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1,VpcTp=1,VclTp=vc32==============================================================================Are you Sure [y/n] ? --- system will auto YES

Deleting ...=================================================================================== 4355 TransportNetwork=1,AtmPort=MS-16-5,VplTp=vp1 >>> Mo deleted===================================================================================Total: 1 MOs attempted, 1 MOs deleted

FINISH

Or the old way……not too sure

lst .b<iub-no> eg. lst .b0095 ldel .b<iub-no>

lpr atmport=ms-18-1 lget atmport=ms-18-1 del <proxydown>-<proxytop-1> WARNING : Don’t remove the MS port

del AtmPort=MS-20-1-* (to delete the whole 63 ports of the ETMC41)

lst Slot=18.*Vc12Ttp=1 or to block all ports : lbl Slot=18.*Vc12Ttp=*

lpr vc<iub> eg. lpr vc95 ldel vc<iub> eg. ldel vc95 (WARNING : Exclude other VCs)

To remove rbs in ATMCC

lst .b<iub-no> eg. lst .b0095 ldel .b<iub-no>

lpr vc<iub> eg. lpr vc95 ldel vc<iub> eg. ldel vc95 (WARNING : Exclude other VCs)

To check pm (performance) counters in RNC/RXI

get 1 (to see the performance directory) ls -l /p001200/pm/ | grep xml (to see the performance files) pst (list the scanners, status) pmr [-m 5 –p 3] (get performance report) [for the last 5 hours + 3 ]

To create performance counters scanner

pst pgetsn <proxy> pcr <name> <mo-name> <counter-name> eg. pcr <rssi> cellcarrier pmAverageRssi pget <mo-name> <counter-name> to read the counters pbl/pdeb <proxy> to stop/resume scanner pdel <proxy> to delete scanner

To set SAC in Utrancell

pr utrancell=ower serviceAreaRef (then) get utrancell=ower serviceAreaRef set utrancell=AMGMMU servicearearef LocationArea=1,servicearea=12 (SAC defined)

To set Electrical Tilt (RET)

pr retdevice get <proxy> set <proxy> electricalAntennaTilt <value> get ret electrical

To set Latitude/Longitude

get sector lat set sector latitude <value>

To log alarm in a nice format

lgevsm

Sample Scripts in moshell

for 10Enter commmands (one per line), then type "done"> get radiolink num> wait 2> done

To enable E1 supervision

set

To create Group (eg. Not reserved VclTp)

get vcltp reservedby !.*= lma <group-name> vcltp reservedby !.*=

To create performance counters

pst

To check cell state

In RBS lst cell get radiolinks (to see how many line/s being used)

In RNC lst utrancell st utrancell 1.*0 (cells Unlocked & Disabled)

To check RBS MO

In RBS st plug (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) cabx cab (without the external parts)

To change PSC (

In RNC st plug (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) cabx cab (without the external parts)

To change SAC (Service Area Code)

In RNC Pr cell Get proxy Get set utrancell=KCC1BU servicearearef LocationArea=1,servicearea=284

To change maxtxpowerdl for specific cell (usually to clear CONGESTION alarms)

In RNC get CUV1BU_1 maxtxpowerdl --> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel) set CUV1BU_1 maxtxpowerdl 402 maxtxpowerdl value stated as x10dBm (actual = 0.1x) maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS) thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 – 4)

in P3 - get SOGXBU_1 maximumtransmissionpower

In RBS determine max capability to transmit SUNWMU> get all xdl get all xdl ---> in EMAS, click RBSLocalCell, Properties, Characteristics, Max & Min value example result printout = maxDlPowerCapability 422

To lock/unlock cells

In RNC st utrancell=sunwmu lst sunw lbl sunw (to lock cell & channels) bl sunw (to lock cell only) deb sunw (to unlock)

To check RBS info

In RBS Get 0 Get 1 (check ntpServerAddressPrimary)

To check network clock synchronisation

In RNC & RBS Read clock (GMT +8) ntpconfig info Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) – from get 1

To check atmport & pp (physical port)

In RBS lpr atmport vc32&33 for signaling lpget 1007 (vc proxy) – to see number of ATM traffic cells transferred get atmport=1-2-2 then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2 to un/lock have to set values 1 or 0

To administer state of Mos

In RBS St plug Deb proxy Bl proxy No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl

To autocreateCV

In RNC & RBS Get config Cv ls (2 CVs will be used for the autocreate CV function) Set “proxy” autoCreatedCVIsTurnedOn true/false Set timeForAutoCreatedCV (UTC time) Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)

To check SAC corruption

In RNC tg | grep -i kcc1bu lh mod1 cell get 1/1/1/1/2/1.44 cellData lookout for , sac int 10 } which states a wrong SAC value for the Utrancell get utrancell=kcc1bu cid (cid = SAC + sector number) get serviceArea=284 to confirm SAC for the cell

To any hanging modules

In RNC only stdh

To restart Node

In RNC,RXI & RBS acc 0 restart poll (to wait 20seconds until node comes up again)

To create CV

In RNC,RXI & RBS cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV cvset CXP9010373%1_R11G -- to set the CV startable

To change LAC (Location Area Code)

In RNC get servicearea=132 get locationarea get routingarea get externalutrancell LAC --> corresponding LAC changed at neighbour RNC (if defined) set ExternalUtranCell=uefaMU_1 lac 12050 -->to change the externalutrancell LAC parameter for the

particular cell at another/neighbour RNC get utrancell=uefa lac --> to view externalutrancell LAC parameter at neighbour RNC get utrancell=cinoMU_3

To restart node

In RNC & node B acc 0 restart pol - to get moshell connected once node has restarted

To check plugin status

In RNC & node B st plugin st plugin 1 0 st plugin 0 1 lst plug 0

To enter Moshell with security enabled

In RNC & node B moshell -c host.p12 10.78.37.225

To block sectors via Moshell

In RNC St blip Bl the proxy Deb the proxy (can have multiple proxies for more cells)

To view delay & attenuation parameters within a sector

In RBS Get jumper Get feeder Get rbs xdl

To delete something already done with a script

In RNC/RXI/RBS First you have to generate the MO Delete script

This is done by ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$

Where add2nde1inrxi_PUJMMU.mo is the script which was run earlier

And pujmrxibesi01.mo is the Delete Script

Modify add2nde1inrxi_PUJMMU.mo so that downtime will be less

Run pujmrxibesi01.mo to undo the wrongly defined MO

Then run the modified/correct add2nde1inrxi_PUJMMU.mo

To check E1 state

In RXI St ms-20-2 Check whether port locked or not pr the port number pr pp(port#)

Pr pp2 or pp7 (ETM1)

lst Slot=8.*Vc12Ttp=5$ (ETMC41, MS-8-5)

Get proxy and view admin state whether locked or not Then do deblocking Deb proxy St proxy

Make sure port is deblocked (can also see in EMAS)

In RBS St atmport Check port lock state

St pp St pp2 st pp3 st pp4

To check locked board in node

In all nodes lst plug 0

To restart / reload board

In all nodes Acc 000900 restart Acc 001400 reload

GSG – get set get

In RNC To activate type gsg To deactivate type gsg again

Use run command (not trun)

run and trun

In all nodes trun is only for xml scripts

run for scripts such as set DAGAMU_1 usedFreqThresh2dEcno -12

trun for running the last script : rbs_EQINMU_site_complete.mo run is for any script (txt for for example)

open logfile l+ 20060113_CR003_RNCTGEM01.log cannot have undo mode while having gsg activated run CR003_13012006.txt close logfile

CAB printout 0 = slot 28, 1 = slot 1

In all nodesRXIKPNG02> cab

060206-11:09:22.......=====================================================================================================SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR===================================================================================================== 0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364489 0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494707 +32C Active 0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494699 +31C StandbyReady 0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442436 0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442439 0 8 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644146 0 10 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644042 0 12 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644052 0 14 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644056 0 16 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644037 0 18 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644067 0 20 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708 TU86592867 0 24 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545997 0 25 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545998 0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545996 0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86546001 0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364157 -----------------------------------------------------------------------------------------------------

1 is slot 10 is slot 28

When lock/unlock from log

In RBS

Lgv Lgaevsm – rather long

Read VSWR / OUTPUT Power from RBS

In RBS lhsh 010900 ps port*

lhsh 010600 lhsh port_0_dev_17 asc vswr - sector 1 lhsh 010900 lhsh port_0_dev_19 asc vswr

lhsh 010900 lhsh port_0_dev_19 asc vswr - sector 2 lhsh 010600 lhsh port_0_dev_17 asc pow

acc 011200 restart - restart AIU

primary ScramblingCode

In RNC get iska primaryscram

maxDlPowerCapability /maxDlIn RBS

get local xdlIn RBS

get SOGXBU_1 maximumtransmissionpower

redefine TD in VC

In RXI Resources for CELL does not come up – apparently TD is defined as U42 lget AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39 lrset AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000

In RBS Resources for CELL does not come up – apparently TD is defined as U42

lget AtmPort=MS-1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39

lrset AtmPort=MS-1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000 pr. Bq - must be win30 pr aal2

then get proxy for TransportNetwork=1,Aal2PathVccTp=ba1

then lpr AtmPort=1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39 get the proxy

look for AtmTrafficDescriptor=C2P4000

Check E1 loop

In node

lacc AtmPort=MS-27-1,VplTp=vp5 eteloopback

Check 101 or not

In node RNC & ATMCC only Pr vc21432 Pr vc*RBSID*32

LST carrier

KIRAMU> lst carrier

060303-10:58:44===================================================================================Proxy Adm State Op. State MO===================================================================================1208 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=11210 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Ssch=11211 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Psch=11212 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pcpich=11213 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=11214 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1,Bch=11215 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=11216 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1,Rach=11217 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Aich=11218 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=21219 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=11220 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=21221 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=11222 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1,Pch=11223 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pich=11225 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=11227 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Ssch=11228 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Psch=11229 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pcpich=11230 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=11231 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1,Bch=11232 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=11233 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1,Rach=11234 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Aich=11235 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=21236 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=11237 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=21238 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=11239 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1,Pch=11240 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pich=11242 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=11244 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Ssch=11245 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Psch=11246 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pcpich=1

1247 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=11248 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1,Bch=11249 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=21250 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=11251 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=21252 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=11253 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1,Pch=11254 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pich=11255 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=11256 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1,Rach=11257 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Aich=1===================================================================================Total: 45 MOs - for fully operational site

OSSRC IP address 10.125.7.103telnet the IP address before the main RBS IP

To Check E1 from RNC then RXIIn node RNC

pr iub pot3 to get RBSID or get iublink rbsid 255 Pr iub *RBSID* Get the proxy for the Aal0 - look for the name RNCBESI01> get IubLink rbsid .8

In node RXI pr .124

Utrancell RelationsIn node RNC

lpr utrancell=evermu_2 utranrelation

RBSIDIn node RBS

Pr iub

Get the proxy NodeBFunction=1,Iub=POT3UU RBSID seen

In node RNC get iublink userlabel setomu

IUB for utrancell definitionIn node RNC

st utrancell=MC get 10545 iub

ATM port from RNCIn node RNC

Must know the RBS ID 1st get aal2pathvcctp=b0016

Check Error countIn node RXI

Pget <proxy>

Check VP1 or VP101In node RNC

Get .vc209

=================================================================================================================5576 TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp101,VpcTp=1,VclTp=vc20932=================================================================================================================VclTpId vc20932atmTrafficDescriptorId AtmTrafficDescriptor=U4availabilityStatus 0 (NO_STATUS)externalVci 20932operationalState 1 (ENABLED)reservedBy AtmCrossConnection=b209ibuserLabel =================================================================================================================5848 TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp101,VpcTp=1,VclTp=vc20932=================================================================================================================VclTpId vc20932atmTrafficDescriptorId AtmTrafficDescriptor=U4availabilityStatus 0 (NO_STATUS)externalVci 20932operationalState 1 (ENABLED)reservedBy AtmCrossConnection=b209iauserLabel =================================================================================================================Total: 10 MOs

Check security turn ON in RBS or NOTIn node RBS

Lt manage Lt mana (also can)

1077 ManagedElementData=1 1078 SwManagement=1

get *ManagedElementData=1* proxy

look for logonServerAddress

if 10.125.7.201,10.125.7.202 --- then security OFF

if https://ckpgominf2:8443/ericsson/servlet/sls,https://ckpgominf3:8443/ericsson/servlet/sls ---- security ON

Check security turn ON in RBS or NOTIn node RNC

Lt manage

To change all gsmrelation in the NodeIn node RNC

set GsmRelation qOffset1sn 1 (1 means 1 db) mom gsmrelation qoffset

To change gsmrelation of only some cellsIn node RNC

lset UtranCell=CHERMU_1,GsmRelation=RANEM1_2 qOffset1sn 7 (7 means 7 db)To get current reading at RNC

lget UtranCell=PRMAMU qOffset1sn lget UtranCell=PRMAMU qOffset2sn

To check what is in the RNCMODULEIn node RNC

Lt rncmodule Get rncmodule Pr rncmodule (then get proxy oso can)

To check how many HSDPA users in a cell (must know CID)In node RNC

dyncelldata cid 02301

RNCKPNG01> dyncelldata cid 02301

060425-10:51:23Trying password from ipdatabase file: /home/emfauzi/moshell/sitefiles/ipdatabase...$ dyncelldata cid 02301cId: 2301Cell froId: 65CC SP: 011000/sp0.lnh/CommonChMainPTrncModuleId: 4IubLink froId: 22Total ASE DL: 944aseDlAdm: 240beMarginAseDl: 100Total ASE UL: 16748aseUlAdm: 500

aseUlAdmOffset: 40beMarginAseUl: 0CPM RL Count: 0compModeAdm: 15HSDPA UE Count: 5 <------------------------- 5 user currentlyhsdpaUsersAdm: 20SF8 RL DL Count: 0sf8Adm: 1SF16 RL DL Count: 0sf16Adm: 16SF32 RL DL Count: 0sf32Adm: 32SF4 RL UL Count: 5sf4AdmUl: 20DL Code Allocation Level: 40.23 %dlCodeAdm: 80 %beMarginDlCode: 5UL Interference: -105.2 dBmFiltered DL Power: 23.44 %pwrAdm: 75 %pwrAdmOffset: 10 %beMarginDlPwr: 10Congestion State: Uncongested$

To check rountingcase at RNCIn node RNC

Pr trxi…….. (will show you the various modules connected to which RXI)

To check RBSid at RNCIn node RNC

get IubLink=Iub_MRT1BU (will show rbsID) get iublink=iub_airtmu

get iublink rbsid (shows you all the RBSids in the RNC) get iublink rbsid 255 if wanna change at RBS, roll back to sitecomplete CV, edit the sitecomplete script (only 2 places to change)

rbsId Integer 269 (@ lline 225) & a2ea String "601220050010269" (@ line 241) router no need change at the RBSid should follow suit thus RBS IP may require change

IN STR at RNCIn node RNC

Str CD12 at the last colum stands for Common Dedicated NodesynchTP 1 & 2 – usually indicates the E1

Change ARFCN freq at RNC & RBS

ARFCN 10637 DL Freq (MHz) 2127.4 UL Freq (MHz) 1937.4

In node RNC

get allmmu_1 arf

typical values (uarfcnDl 10662 & uarfcnUl 9712 )In node RBS

get antenna fq

typical values (fqBandHighEdge 10712 & fqBandLowEdge 10612) thus if requested value at RNC is 10637 and if the value is between 10612 & 10712 at RBS, change only at RNC

To look for host.p12 in Node BIn node RBS

Ls will show you are in drive D To go to C drive: cd /c Go to java folder Ls and you will

ftp 10.78 ..... Pw – rbs rbs

Bin (make sure in Binary and not ASCII) Cd /c Cd java Put host.p12 (ensure host.p12 file in moshell folder ya) bye

To continuously pingPing –s 10.78.1.1101

To check CS and PS linksIn node RNC

lga | grep Mtp3

To check Why cannot PING RBSIn node RXI

pr atmcross.*23 (23 is the RBS ID) 4029 TransportNetwork=1,AtmCrossConnection=b23ia 4030 TransportNetwork=1,AtmCrossConnection=b23ib 4031 TransportNetwork=1,AtmCrossConnection=b23sa1 4032 TransportNetwork=1,AtmCrossConnection=b23sb1 4033 TransportNetwork=1,AtmCrossConnection=b23ca 4034 TransportNetwork=1,AtmCrossConnection=b23cb 4035 TransportNetwork=1,AtmCrossConnection=b23da 4036 TransportNetwork=1,AtmCrossConnection=b23db lget 4029 AtmCrossConnectionId b23ia operationalState 1 (ENABLED) userLabel vclTpAId AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc2332 vclTpBId AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32 acc AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32 eteloopback 2855 TransportNetwork=1,AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32 acc 2855 eteloopback Are you Sure [y/n] ? y 2855 AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32 eteLoopBack 0

>>> Return value = true ----- OK

In node RNC

pr atmcross.*23 (23 is the RBS ID) 4029 TransportNetwork=1,AtmCrossConnection=b23ia 4030 TransportNetwork=1,AtmCrossConnection=b23ib

In node ATMCC

pr atmcross.*friq (use RBS name)

To check autoCreatedCVIsTurnedOn is TRUE or FALSEIn node RNC,RXI,ATMCC

pr configuration 4029 TransportNetwork=1,AtmCrossConnection=b23ia 4030 TransportNetwork=1,AtmCrossConnection=b23ib

To check IP connectivityIn node RNC,RXI,ATMCC,RBS

lacc AtmPort=1-2-1 eteloopback

CREATE( parent "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1" identity "vc12232" moType VclTp exception none nrOfAttributes 3 userLabel String "VclTp vc12232" externalVci Integer 12232 atmTrafficDescriptorId Ref "ManagedElement=1,TransportNetwork=1,AtmTrafficDescriptor=U4")

CREATE( parent "ManagedElement=1,TransportNetwork=1" identity "bCSSQBUib" moType AtmCrossConnection exception none nrOfAttributes 3 userLabel String "AtmCrossConnection bCSSQBUib" vclTpAId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc12232" vclTpBId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-25-2,VplTp=vp1,VpcTp=1,VclTp=vc12233")

ARW FAIL due to LDAP

----------------------------------------------- RBS Creation Details (UNSUCCESSFUL)-----------------------------------------------

[creationAttemptTime= 2006-06-09 12:34:55.962][SubNetwork=MY_R,SubNetwork=RNCKLCC01,MeContext=RNCKLCC01]

Unable to create the RBS details of failure during RBS creation: unable to create VP MOs , details : exception when creating VirtualPath MO on, SubNetwork=MY_R,TnApplication=1details Specified object, @MoDName=SubNetwork=MY_R,TnApplication=1,VirtualPath=RXIKLCC02_MS-16-5_1__TAT1BU_1-2-1_1 is already defined , details:exception when creating VirtualPath MO on, SubNetwork=MY_R,TnApplication=1details Specified object, @MoDName=SubNetwork=MY_R,TnApplication=1,VirtualPath=RXIKLCC02_MS-16-5_1__TAT1BU_1-2-1_1 is already definedAll changes are rolled back

Usually something in the LDAP need to be deleted.Make sure RXI / RNC part is okLpr vc297Lst .b297

File import in OSSRC failedCheck the freq for the CELL 1942.4 and 2132.4 ------------ wrong!

Correct values are those multiplied with 59712 and 10662 CORRECT

To check HSDPA activityIn node RNC

dyncelldata cid 2301 (look for HSDPA UE Count: 2)

dyncelldata cid 2301 | grep hsdpa

To check queueSelectAlgorithm & cqiAdjustmentOn at RBSIn node RBS

UEFAMU> pr carrier que 060615-14:50:24 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2 ======================================================================

============= Proxy MO ======================================================================

============= 1381 NodeBFunction=1,Sector=3,Carrier=1 1399 NodeBFunction=1,Sector=2,Carrier=1 1417 NodeBFunction=1,Sector=1,Carrier=1 set 1417 queueSelectAlgorithm 0

UEFAMU> get 1417 que

060615-14:51:08 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2==============================================================================MO Attribute Value==============================================================================Sector=1,Carrier=1 frequencyPlane 1Sector=1,Carrier=1 queueSelectAlgorithm 1 (PROPORTIONAL_FAIR)==============================================================================Total: 1 MOs

UEFAMU> set 1417 queueSelectAlgorithm 0

060615-14:51:24 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2Set queueselectalgorithm on following MOs ?=================================================================================== 1417 NodeBFunction=1,Sector=1,Carrier=1===================================================================================Are you Sure [y/n] ? y

============================================================================== Id MO queueselectalgorithm Result============================================================================== 1417 Sector=1,Carrier=1 0 >>> Set.==============================================================================Total: 1 MOs attempted, 1 MOs set

UEFAMU> get 1417 que

060615-14:51:29 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2==============================================================================MO Attribute Value==============================================================================Sector=1,Carrier=1 frequencyPlane 1Sector=1,Carrier=1 queueSelectAlgorithm 0 (ROUND_ROBIN)==============================================================================Total: 1 MOs

For cqiAdjustmentOnlset carrier cqiAdjustmentOn true --- only can worklset carrier cqiAdjustmentOn 1 -- cannot

To check through logsIn nodes

lgaevsmir

To check error log info In node OSSRC

To check RBS ID in RBS In node RBS

Get IUB

To check cell reservedIn node RNC

RNCSHTI01> get tubo cell 060626-18:15:50 10.78.192.1 6.1zc RNC_NODE_MODEL_F_4_3 ======================================================================

=========================================== MO Attribute Value ======================================================================

=========================================== UtranCell=TUBOMU_3 UtranCellId TUBOMU_3 UtranCell=TUBOMU_3 cellReserved 1 (NOT_RESERVED) UtranCell=TUBOMU_3 localCellId 3 UtranCell=TUBOMU_3 tCell 3 UtranCell=TUBOMU_3 utranCellPosition i[0] = UtranCell=TUBOMU_3,UtranRelation=TUBOMU_2 utranCellRef UtranCell=TUBOMU_2 UtranCell=TUBOMU_3,UtranRelation=TUBOMU_1 utranCellRef UtranCell=TUBOMU_1 UtranCell=TUBOMU_2 UtranCellId TUBOMU_2 UtranCell=TUBOMU_2 cellReserved 1 (NOT_RESERVED) UtranCell=TUBOMU_2 localCellId 2 UtranCell=TUBOMU_2 tCell 2 UtranCell=TUBOMU_2 utranCellPosition i[0] = UtranCell=TUBOMU_2,UtranRelation=TUBOMU_3 utranCellRef UtranCell=TUBOMU_3 UtranCell=TUBOMU_2,UtranRelation=TUBOMU_1 utranCellRef UtranCell=TUBOMU_1 UtranCell=TUBOMU_1 UtranCellId TUBOMU_1 UtranCell=TUBOMU_1 cellReserved 1 (NOT_RESERVED) UtranCell=TUBOMU_1 localCellId 1 UtranCell=TUBOMU_1 tCell 1 UtranCell=TUBOMU_1 utranCellPosition i[0] = UtranCell=TUBOMU_1,UtranRelation=TUBOMU_3 utranCellRef UtranCell=TUBOMU_3 UtranCell=TUBOMU_1,UtranRelation=TUBOMU_2 utranCellRef UtranCell=TUBOMU_2 ======================================================================

=========================================== Total: 9 MOs

cellReserved 1 (NOT_RESERVED) ------ can make call

RNCSHTI01> get tubo cellReserved

060626-18:25:55 10.78.192.1 6.1zc RNC_NODE_MODEL_F_4_3=================================================================================================================MO Attribute Value

=================================================================================================================UtranCell=TUBOMU_3 cellReserved 0 (RESERVED)UtranCell=TUBOMU_2 cellReserved 0 (RESERVED)UtranCell=TUBOMU_1 cellReserved 0 (RESERVED)=================================================================================================================Total: 3 MOsNO 3G RF signal on PhoneCannot make call – must use specific SIM card

To which E1 Node B is using In node RNC

get jltg rbsidIn node RXI

Lst .b(rbs ID)

Get proxy ……. Can see which MS port

lk UniSaalTp=b124qa (124=rbsID) st ms-10-52|ms-10-53 lst slot=10.*53 lst slot=10.*53|slot=10.*52

NBAP – AAL5, nodesynchTP AAL-0

To check RBS IDIn node RNC

get IubLink rbsid 267In node RXI

Pr .267

To check antenna Supervision ThresholdIn node RBS

get antenna antennaSupervisionThreshold

To check downlink & uplink rangeIn node RBS

lget antenna low|high The downlink – uplink = 190x5=950

To check commands executed within a nodeIn node

Lgo 1 1 for number of days

To check which RXI port from RNCIn node RNC

get iublink=iub_airtmu Will show you the RBSID lpr AtmCrossConnection=b208 get proxy see 1 or 101 - will tell you which RXI to look at

In node RXI

get iublink=iub_airtmu

To check whether ExternalGsmCell exist in RNCIn node RNC

get ExternalGsmCell=RNB1B1_0

To check aal2path disabledIn node RXI

Lt aal2path (only aal2path …… don’t lt all) Lst all disable

To set Confirmation of bl/deb/set/acc commands = disabledIn node RNC

Confbl (just for your moshell session)

To Perform a get before and after set = enabledIn node RNC

gsg

Why GPB will not load up when put into SubrackIn node RNC

Stop all java module Pglist –e You will get the jvm handler (number) Pgkill [handler] -- restarts the jvm

To add software allocations in the RBS for ETMC1In node RBS

Open EMAS Go to SoftwareAllocation Right click, Add Choose the specific board/ swallocation - fact is it will create a SWallocation ID = 1 in the rbs Use moshell to create an Undo file U+ Then delete the swallocation Lt swalloc Pr swalloc Del proxy U- Then edit the undo file

To enable traceIn node RBS

te enable bus_send bus_receive NBAP*

te s Ans* (just to look at the last line) te enable bus_send bus_receive Ans_aal2ap_proc

te log read | decoder.pl | tee SCO1BU.log | flow.pl –colour

to place it in a log --- te log read | decoder.pl | tee SCO1BU.log | flow.pl –colour logs will be at /ethanap

To check which module the card is atIn node RNC

get IubLink=Iub_SCO1BU

get RncModule=6 -- to see which RBS in module, 6 being module number or

get IubLink rncModuleRef RncModule=6 (cekap way) get iublink rncModuleRef RncModule=10 get ReliableProgramUniter=rnc_cell_6 admActiveSlot Subrack=ES-2,Slot=14 admPassiveSlot Subrack=ES-2,Slot=16

In node RXI

get aal2pathvcc. Pathid

get aal2pathvcc.*b232 pathid --- cannot use

get Aal2PathVccTp.b*232 pathid --- can

In node RBS N Mon? TargetMonitor on disk: Yes TargetMonitor loaded: No TargetMonitor started: No Mon+ te status Ans* to on NBAP trace te enable bus_send bus_receive NBAP to see if NBAP trace is ON or NOT

te status NBAP $ te status NBAP pid name enabled groups - NBAP check error info bus_send bus_receive interface object

To disable --- te disable bus_send bus_receive NBAP Check status again $ te status NBAP pid name enabled groups - NBAP check error info interface object

In node TeraTerm User = eric Pw = ericsson Monitor 10.78.xx.xx

To check and change PathIDIn node RXI

To check commands sent in nodeIn node RNC, RBS, RXI

hi

To check Node IP from OSSRCIn node OSSRC

To set VP from one Trafficdescriptor to another TrafficdescriptorIn node RNC

Pr VP

Get proxy for particular VP

set 4880 atmTrafficDescriptor AtmTrafficDescriptor= C1P42000

To check which RBS is in the MS at RXIIn node RXI

lget Atmport=ms-8.*vc32 reservedBy

then lget .0105 -- userlabel usually empty (not filled)

To check external Open Door alarm in RBS is set to which probable causeIn node RBS

Pr almdevice

Get proxy (either 2 / 1 or 9) Usually 9 for RBS door and 2 for BBU door Some put 1 for BBU door Get proxy for parameter check

Lock proxy to change probableCause Bl 54

probableCause 522 power supply

probableCause 118 enclosure_door_open_m3100

set 54 probableCause 118 then unlock back proxy deb 54

To calibrate RET via moshellIn node RBS

Lpr ret Acl proxy 253 Equipment=1,SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1 acc 267 forceCalibration alarm will go away in 2 minutes approx

To check not known yetIn node

lhsh 010200 pboot sh par

To grep from logsIn node MOSHELL terminal

grep \(RESERVED /home/ethanap/moshell_logfiles/logs_moshell/sessionlog/060825-113735_RNCSHTI01.log | tee a_cel0.log

grep \(NOT_RESERVED /home/ethanap/20060825rncbesi01 | tee BESI01_Nreserve.log

files in a directory : grep productName /home/ethanap/rbs/log/get_0/* | tee rbs_type.log

To check number of ATMcells transferred through portsIn node RXI

lpr ms-12-63

lpget AtmPort=MS-12-63,VplTp=vp1,VpcTp=1,VclTp=vc32 --- RXI to node B (RBS uses MS-12-63)

pr .153

lpget AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc15332 -- RXI to RNC (RBS ID= 153)

To check loopback on atmportIn node RNC,RXI,RBS

lacc AtmPort=1-1-1,VplTp=vp2,VpcTp=1,VclTp=vc32 eteloopback Yes False – fail, true - pass

To check frequencies used for RBSIn node RNC

lget utrancell=fifamu_1 uarfcnIn node RBS

get antenna fq

To get Total Commander folders viewIn node Total Commander (not to be confused with Wondow’s Commander)

Ctrl key and Up together

To check space in HDIn node

Cabd

vols

To check which RBS is on a certain portIn node RXI

lpr AtmPort=MS-17-7

Look out for ---- reservedBy Aal5TpVccTp=b0093qb RBS ID = 93 lpr .b0093

get 2993 TransportNetwork=1,AtmCrossConnection=b0093ca

hopefully got userlabel to refer to userLabel AtmCrossConnection bISM1BUca

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC

To check In node RNC