3m mp8620 quicksetup english
DESCRIPTION
Conexionado rápido del proyector 3M MP8620TRANSCRIPT
-
3MP8620 Multimedia Projector Quick Setup Instructions
3M 1997 78-6970-xxxx-x
Technical Assistance & Product Information
1-800-328-1371 Internet: [email protected]
Cable Connections: Always turn power off when making any cable connections. 1. Power Cord2. Computer3. Mouse Emulation
a) MS Mouse Portb) PS/2 Mouse Port
4. S-VHS5. VCR
Procedure:1. Turn off all power to projector and input sources before making any connections.2. Connect cables (be careful not to bend any pins in cable connector plugs.3. Start up projector then start up input sources.
-
3MP8620 Multimedia Projector Quick Setup Instructions
Projector Startup Procedure
1. Lift cover locks (1) and raise topto open position.
2. Press the power switch (2) to ON.The red LED (4) illuminates.
3. Press the STANDBY button (3).The green LED (4) illuminates.
4. Check all ventilation slots andclear away any obstructions.
5. Turn the lens (5) to focus.6. Press the foot lock button (6) to
release height adjustment feet.Extend/retract feet (7) to for bestimage height.
7. Rotate feet (8) for fine adjustment.8. Move projector closer or further
away from screen to adjust width ofprojected image.
Standby Mode1. Press the STANDBY button (3).2. The lamp will switch off and the red LED (4) will illuminate.3. Press the STANDBY button (3) to illuminate lamp and project image.
Projector Shutdown Procedure1. Press the STANDBY button (3).
(The lamp turns off, the fan motor continues to run)
Do not turn off the projector power before pressing the STANDBY
button. The fan motor will run for about 1 minute and cool the projector.
2. After fan stops, press main power switch (2) to "OFF".3. Lift cover locks (1) and lower cover into closed position to
protect lens.4. Disconnect cables to transport the projector.
Caution!
8620-01A
L R
ENTER
ON/OFF
REVEAL
FREEZE
MAGNIFY
BLANK
TIMER
POINTER
MENU
VIDEO PC
Projector Packout
TIMER
FREEZE
MAGNIFY
REVEAL
BLANK
R
L/ENTER
MENU
POINTER
VIDEO
PC
Press to toggle projector between STANDBY mode (lampoff, fan off) and operation mode (lamp on, fan on).Press REVEAL to cover the image on the screen with agray mask. Use the control stick to reveal the image orpress REVEAL again to return full image.Stores (freezes) the projected image. Press again toreturn current image.Press MAGNIFY to double image size in horizontal andvertical directions. Press again to return image.Remove image (white background). Return image.Toggle between TIMER and data projection image. WhenTIMER is displayed, press ENTER and move control stickto adjust value. Press ENTER to start timer function.Display pointer. Operate control stick to move pointer.Press to adjust brightness image.Switch to video mode, then press again to select videosource (video or s-video).Press to mute the speaker. Press again to return sound.Switch to PC mode.Press to adjust speaker volume.Display on-screen menu system (projector adjustments)Toggle mouse emulation ON/OFF.ON: The L and R buttons operate the left and right mousekey functions. Hold down L/R and operate control stick fordrag and drop capability.OFF: L button is the ENTER confirmation key. R buttonnot used. Control stick centers image.Mouse emulation ON, left mouse button. Emulation OFF,confirmation of selection.Mouse emulation ON, right mouse button.Mouse emulation ON, control stick moves on-screenpointer. OFF, control stick centers image.
Remote Control Transmitter
Packout Items shown above:1. Projector 6. PS/2 Mouse Adaptor2. Remote Control 7. Audio Cable (RCA mini jack)3. VGA Cable 8. S-Video cable4. Mouse Cable 9. RCA Video Cable5. Power Cord 10. Soft Case