4 days public auction 4 days vancouver/aveos... · co 3704 12’ shear w/4.6mm cap., s/n 1789.1510...

AUCTIONS | LIQUIDATIONS | APPRAISALS

75 International Blvd. | Suite 102Toronto, ON M9W 6L9 | Tel: 416.242.3560

www.maynards.com

31555 W. 14 Mile Road | Suite 207Farmington Hills, MI | 48334

T. 248.254.9999 | F. 248.254.9995

www.hilcoind.com

PUBLIC AUCTIONMaynards Industries 250 H Street PMB 207 Blaine, WA 98230

IN CONJUNCTION WITHSALE CONDUCTED BY

Industries Ltd.

AS APPROVED BY THE QUEBEC SUPERIOR COURT

AN UNPRECEDENTED OFFERING OF COMMERCIAL AIRCRAFT (MRO) MAINTENANCE, REPAIR AND

OVERHAUL TOOLING & EQUIPMENT

AUCTION #1 ~ VANCOUVER

Wed. & Thurs.Aug. 15 & 16, 2012

10am6001 GRANT McCONACHIE WAY,RICHMOND, BRITISH COLUMBIA

EACH DAY(PDT)

AUCTION #2 ~ MONTREAL

Wed. & Thurs.Aug. 22 & 23, 2012

10am720 BOULEVARD DE LA CÔTE VERTU,

DORVAL, QUEBEC

EACH DAY(EDT)

AVEOS FLEETPERFORMANCE

INC.AIR FRAME DIVISION

2 HANGARFACILITIESOVER 600,000SQ.FT.

4 DAYS2 LOCATIONSPUBLIC AUCTION


4 DAYS2 LOCATIONS

AUCTION TERMS & CONDITIONS | PAYMENT: 25% NON-REFUNDABLE DEpOsit ON AwARD OF BiD, BALANcE withiN 48 hOURs. pAymENt is cAsh, cAshiER’s chEcK, cERtiFiED chEcK, wiRE tRANsFER, cOmpANy chEcK ONLy iF AccOmpANiED By A LEttER FROm yOUR BANK gUARANtEEiNg AmOUNt OF chEcK FOR DEpOsit AND/OR pAymENt iN FULL. NO pERsONAL chEcKs. FULL pAymENt mUst BE mADE BEFORE REmOvAL OF pURchAsE. REMOVAL: LAst DAy OF REmOvAL is FRiDAy, sEptEmBER 21, 2012. AND As FURthER DEFiNED iN thE sALE cAtALOgUE. EvERythiNg is sOLD “As is, whERE is.” ALL sALEs FiNAL. cOst AND REspONsiBiLity FOR REmOvAL OF pURchAsE REmAiNs with thE pURchAsER. EvERy EFFORt wiLL BE mADE tO FAciLitAtE REmOvAL. whiLE qUANtitiEs AND DEscRiptiONs ARE BELiEvED tO BE AccURAtE, thE AUctiONEER, OwNERs OR cOUNsEL mAKE NO wARRANtiEs OR gUARANtEEs EithER ExpREssED OR impLiED As tO AUthENticity, gENUiNENEss OF, OR DEFEcts iN ANy LOt AND wiLL NOt BE hELD REspONsiBLE FOR ANy ADvERtisiNg DiscREpANciEs OR iNAccURAciEs. NO wARRANtiEs whAtsOEvER ARE mADE As tO cONDitiON, mERchANtiBiLity OR FitNEss FOR UsE OF ANy itEm. mAy wE sUggEst yOU tAKE FULL ADvANtAgE OF thE pREviEw AND iNspEctiON pERiOD | SALE SubjECT TO AddITIONS, dELETIONS & PRIOR SALES. PLEASE ChECk AVAILAbILITy OF EquIPMENT | BUYERS PREMIUMS: 15% ON-SITE, 18% ON-LINE | ALL SALES IN CANAdIAN FuNdS


Aug. 15 & 16, 20126001 GRANT McCONACHIE WAY,RICHMOND, BRITISH COLUMBIA

AVEOS FLEETPERFORMANCE INC.(AIR FRAME DIVISION)


Aug. 22 & 23, 2012720 BOULEVARD DE LA CÔTE-VERTU

DORVAL, QUEBEC

ONSITE &

WEBCAST



www.maynards.com


T. 248.254.9999 | F. 248.254.9995

www.hilcoind.com


Industries (1991) Inc.

BID LIVE, ON-LINE! REGISTER AT EITHER

For Further Details or to Arrange a Pre-Inspection Please Contact Mike McIntosh at 416-242-3560 or [email protected]



MAJOR TOOLING & MRO SPECIFICASSETS AVAILABLE FOR PRIOR SALE

MAJOR TOOLING &MRO SPECIFIC ASSETS

AVAILABLE FOR PRIOR SALEVisit www.maynards.com for Details

2

BOEING 767 TOOLING

AIRBUS A320 TOOLING

LARGE QTY. OF AVIONICS & MISC. EQUIPMENT & TOOLING

NLG Lower Seal Tool • Gear Jack Assembly Tool • I/B/0/B T/E Flap Lock • CF6-80 Pylon Strut Sling • MLG Trunnion Pin Equipment • Accessory Bay Platform • HOIST B767 Flap Bracket • Bulk Cargo Door Clamp • NLG Spring Extender • Portable Sand Blaster • MLG Side Brack Springs • Pressure Washer Kit • Spring Extender Equip-ment • Water Ram Tool • Hold Open • Rig Prox Sensors Set • AFT Flap to INBD. Restraint • HOIST B767 Flap Bracket • MLG Side Strut Sling • MLG Downlock Stop Shim Jig • Load Positioner • Fuel Leak Test Plug • MLG Retract Pin Puller • Hori-zontal Stab Pivot BRG.R/I Kit • Heat Exchanger Cleaning Wands • MLG Side Strut Spring Compressor • NLG A-Frame Support • Load Positioner Adapter • APU Sling • MLG Lower BRG Seal Kit • Cradle Adapter • Jacking Hinge H Set • Actuator Pin Kit • Bulk Cargo Door Clamp • MLG Retract Actuator Spring • Lock MTCE • Cargo Door Sling • NLG R/I Kit • Pass. Slide Dummy Kit • Aileron Rigging Bar • Inlet Cowl Sling • AILERON Rig Bar • JT9D/PW4000 T/R Sling • JT9D/PW4000 T/R Sling • Cabin Door Dummy Weight Kit • Qty of Hoist Adapters • APU Cradle • Stab Trim Relief • CF6-80 T/R Sling

Brake Puller - Main Landing Gear • Outboard Rigging Kit • Fuel Tank Leak Check • (3) Aircraft Storm Protect Kit • Protractor - Control Sur-face Deflection • THRUST Reverser Sling • APU Hoist • BALLAST PAX Door Weights • T/R Hold Open Set • CFM-56 Bootstrap Kit • CF6-80 Inlet Cowl • Elevator Sling • N4 R/I Bushing Kit • Elevator Locking Tool • AILERON Lifting Frame Assy • BALLAST PAX Door Weights • Elevator Neutral Gauge • Flap Rigging TRA Board • TR3 Flap Rig Board • TR2 Flap Rig Board • Leading Edge Slat Sling •

Leading Edge Slat Sling • RAT Protection Screen

MAINTENANCE / FAbRICATION EquIPMENTCHICAGO 4’ Hand Brake w/Pexto 4’ Hand Shear • IBARMIA TL-25 Gear Head Drill • Large Qty VIDMAR Cabinets • Large Qty of JUSTRITE Flammable Storage Cabinets • (2) DEVILBISS Down Draft Booths • Mechanics Jacks • Work Benches • ELLIS 1800 12” Horz. Band Saw • TRAYTOP Engine Lathe • 50 Ton Shop Press • DELTA Combo Sand/Grinder w/Dust Collector • DELTA Drill Press • KING Table Saw • MILLER Syncrowave Welder • ESAB MigMaster 250 Welder • DEVILBISS 15x40x8’ Spray Paint Enclosure • (3) SPECTRATHERM 4000s Portable UV Drying Lights • (2) GRAYCO Airless Paint Mix-ers • TORIT 12x10x8’ Downdraft Spray Booth • Assorted Paint Mixers, Pumps, Guns • DAREx XT3000 Tool Sharpener • HYD-MECH S10 Horizontal Bandsaw, s/n W0998137 • JACK MILL J40 Tool Grinder • KONDIA Powermill FV-1 Turret Mill w/3-Axis DRO • CA-zENEUVE 360HV-X Engine Lathe w/2-Axis DRO, 2” Spindle • MICROWEILY TY-1860TS Engine Lathe w/2-Axis DRO, 3” Spindle • Misc. Lathe Tooling, Collets, Faceplates, Di-viding Heads, Precision Vises, End Mills, V-Blocks, Clamps, Heli Coil Kits, Shims, Etc. • ACCUTEC 2500M Universal Mill w/3-Axis DRO, 250# Electric Hoist, s/n 1088148 • 2007 EUMEGA MDV4.5 Turret Mill w/3-Axis DRO, Power Table • Micrometers, Misc. Test Equipment • TOS VS32E Gear Head Drill • ALL STEEL 10G-4 Hyd. Shear w/Digital Con-trols, s/n M-101273 • RACK ENGINEERING 5-Section Pull Out Material Rack w/2000# Cap. per Section • DECKEL Pantograph • Large Qty of Bushings, Gauges, Small Tool-ing for Aircraft • WIEDEMANN RZ41M Rotary Turret Punch • RK MACHINERY 30 Ton Shop Press • PExTO Corner Knotcher • PExTO Hand Punch • ALL STEEL 25-4 4’ 25 Ton Hyd. Brake, s/n 72082 • Large Qty of Ass’t. Brake Dies • Misc. Drill Presses, Cleat Folders • CINCINNATI 90CB 8’ 90 Ton Hyd. Press Brake, s/n 47006 • 2004 GASPARINI CO 3704 12’ Shear w/4.6mm Cap., s/n 1789.1510 • TORIT Down Draft Table • PExTO Plate Rolls • STARTRITE • 20 RWS Vert. Bandsaw • ECKOLD Piccolo Punch • DOALL 3613-1 36” Throat Vert. Bandsaw • TORIT Dust Collector • (2) Combo Sand/Grinder • KING Spindle Sander • Portable Dust Collector • Shot Blast Cabinet • WILTON Drill Press • IMET Cold Cut Saw • (3) BALDOR Dbl End Grinders • Parts Crib w/Ass’t. Measuring Equipment, Testers, Precision Tooling, Specialized Job Boxes, Precision Fasteners, Air Tools • SPACEMASTER 2 Ton Overhead Crane w/40’ Span • TORIT 10x40’ 10-Section Spray Booth • BOSCH Router Table • DOALL 36” Throat Vert. Bandsaw • HOLzHER 1265 Supercut Vert. Panel Saw • GENERAL 15-250M1 Planer • (2) TORIT Dust Collec-tors • NIAGARA 18 Gauge 10’ Mechanical Shear • MEC ART 30x40’x9’ Modular Clean Room • (5) TRISK UV Drying Lights • 2002 PYRADIA 450*C 10’x30’ Curing Oven

CHILLER ROOMB/E AEROSPACE R134A Coolant Flushing Station, s/n 4014-001

TOILET ROOMROUSSAU 29S Sonic Washer • R&M 1.5 Ton Crane w/30’ Span • JET POWER 400HZ Ground Power System, s/n ED-5113

FABRIC SHOPGERBER S3200 CNC Fabric Cutting Table • ROLAND SolJet ProIIV Large Format Printer • MIMAKI CF2-0912 Router Table • NEBLAM 1100-ee Laminator

COMPOSITE SHOPDENRAY Down Draft Sanding Table • DELTA Mitre Saw • DELTA Combo Sand/Grinder • GENERAL Vertical Bandsaw • GRECO Heat Lamp Vacuum Applicator w/5’x7’ Cap.

PLUMBING SHOPFLUKE 8845A Precision Multimeter • SORENSEN DCR 40-13B Power Supply • BK PRECISION 1730A 30V/3A DC Power Supply • PACE MBT SensaTemp Soldering Iron Controller • SCIENSCOPE IL-F01-150plus Fiber Optic Illuminator • BAUSCH & LOMB StereoZoom 4 0,7x-3.0x Stereo Microscope • WAVETEK Mod. 19 2Mhz Sweep/Func-tion Generator w/HeathKit Mod. IN-11 Decade Resistance Controller • SORENSEN QSB28-8 Power Supply • YAMATO DX602 Drying Oven • (2) Crimping Machines • CANADA GENERAL ELECTRIC 1100*F Heat Treat Oven • FAMCO 5CR Arbour Press • LINDBERG 1600*F Heat Treat Oven • (2) PYRADIA P10P038038038HMTXB 1250*F Heat Treat Ovens • ROCKWELL Hardness Tester

SEWING ROOM / OVEN ROOMSINGER 591 Sewing Machine • SINGER Singer 211 Sewing Machine • JUKI LU-563 Sewing Machine • SINGER 842 • JUKI LU-563 • SINGER 211 • Ass’t. Variable Power Sources • Test Oven Bench w/Variable Power Sources, Precision Thermometers, Test Ovens, Temp. Controllers

11

Auction 1: Wed & Thurs, Aug. 15 & 16 10am Each day (PdT)Location: 6001 Grant McConachie Way (North Service Rd.) Richmond (Vancouver), bCPreview: Tues, Aug. 14 from 9am-5pmContact: Mike McIntosh 416-242-3560

DIRECTIONS: ONLY 5 MINUTES FROM VANCOUVER INTER-NATIONAL AIRPORT - FOLLOW SIGNS FOR VANCOUVER; TURN LEFT ON TEMPLETON; LEFT ON NORTH SERVICE RD., DESTINA-TION WILL BE ON THE RIGHT.

SALE SITE

•

AUGUST 22 & 23 AT 10AM | MONTREAL

767/777 - A320 - GENERIC JACK/COWL STANDS

AIRCRAFT SUPPORT EQUIP.THRUST Reverser Dollies • B767 Pylon Stands • B767 Fan Cowl Stands • CORE Cowl Stands • (12) MALABAR Complete Set of Jack Stands for 767 w/ Nose, Wing, Tail Stands • Large Qty of Cargo/Airframe Access Stands • (2) Wing Tank Drain Carts • MALABAR Set of Jack Stands for the A320/A330/A340 • Large Qty of Fiberglass Step Ladders • Large Qty of Airframe Support Equipment w/High Capacity Floor Jacks, Work Lights, Spill Kits, HEPA Vacuums, Extension Cord Reels, Exhaust Fans, etc. • Large Qty of Assorted Material Carts • AMS Hydraulic Pump Cart • (4) JETPOWER PWM2 400HZ Ground Power System Carts • (4) Mobile Engine Stands • (2) Reverse Thruster Stands • (3) A320 Cargo Access Stands • 737 Complete Jack Set • Engine Removal Gantry • A320 Wing Docks • Engine Stand • (6) Assorted Pressure Washers

WING STANDS

(2) BURRARD MECHANI-CAL Wing Stands • 747/DC 10 Permanent Scaffolding • (2) A320 Tail Docks • A320 Entry Stands

3

(4) SKYJACK SJ-111-3220 Scissor Lifts • (2) SKYJACK SJ-111-3219 • (5) GENIE GS 26/46 • (4) GENIE GS 19/30 • (2) SKYJACK SJ-111-3224 • (4) SKYJACK SJ-1007-20EE • 2005 JLG 20DVL Manlift • GENIE GS 20/32 • GENIE Z-45/25J • JLG 35 Electric 35’ 500# Boom Lift • 2007 GENIE S-65 65’ 500# Boom Lift w/1655hrs, s/n S6007-15625 • 2006 GENIE Z34/22M Boom Lift w/475hrs, s/n Z34N06-5379 • 2005 GENIE Z-45/25J Boom Lift w/2250hrs, s/n Z452505-25563 • GENIE Z-45/25J Boom Lift • BRODERSON IC-200-1C 30,000# Mobile Crane w/1066hrs, Raco Digital Scale, s/n 104218 • 1997 FORD F350 Crew Cab Scissor Lift Truck w/Plafolift 800# Lift • HYSTER S50XL 5000# Forklift • TAYLOR DUNN Electric 4-Seat Cart • CLARK FCT30 Propane Tow Cart, s/n G408 • YALE GLP100M 8650# LPG Forklift, 1600hrs, s/n C813D03017Y • MOTREC Electric Utility Cart • (3) MOTREC Electric Utility Carts • YALE ERC60 5000# Electric Forklift, 164 Lift, s/n E108V12484X • HUFF Tow Tractor • RAYMOND Electric Pallet Jack • TENNANT 7200 Ride On Floor Sweeper w/1450hrs • HYSTER H80XL2 7700# LPG Forklift w/172” Lift, 2690 hrs

MOBILE EQUIPMENT

10

AUGUST 15 & 16 AT 10AM | VANCOUVERMONTREAL | AUGUST 22 & 23 AT 10AM

For complete information visit us on the web atwww.maynards.com

9

TEST EQUIPMENT, AVIONICS, GAS, BATTERY TEST

(6) GENIE GS-2646 Scissor Lifts • YALE ERC050 4800# Electric Forklift “EE” Certified • (2) Forklift Safety Cages • TOYOTA 42-GFGCU25 3500# LPG Forklift w/189 Lift • CLARK TA 30F Propane 3000# Tugger • HYSTER H155XL 15,000# Forklift w/8600hrs, Dual LPG Tanks • INTERNATIONAL HARVESTER T300-SL Diesel Tugger • 2006 JLG E600JP 60ft 500# Zoom Lift • TAYLOR DUNN Elec-tric Utility Carts • Assorted Electric and LPG Forklifts and Order Pickers

MOBILE / GROUND SUPPORT EQUIPMENT

4

SEP ALbRET POuRTEAu COMPLETE WIdE bOdy MAINTENANCE dOCkING SySTEM1999 SEP Maintenance Portable Platform System for Wide-Body Aircraft with light al-loy docks, anti skid aluminum flooring, all adjustable railings, All docks w/ Stabilizing jacks, all docks have utility networks and hydraulic systems including compressed air and electrical distribution, motorized exter-nal wing and PHR docks, crane supported over-head work platforms [Drawings available at www.maynards.com]

Wing and Tail Stand • 2002 ENDURON INC C02000 A319/A320/A321/B737 Wing Stand, s/n E02-909L • 8’x10’ Lift Platforms • Large Qty of Production Stairs • Large Qty of PLATOLIFT Cargo/Airframe Access Stands

CLEVELAND Tramrail 10 Ton Overhead Crane with Adjust-able Height Work Platform w/Approx. 250’ Span • CLEVE-LAND Tramrail 10 Ton Overhead Crane w/Approx. 250’ Span • SPACEMASTER 1 Ton 30’ Span Overhead Crane

WING STANDS

OVERHEAD CRANES

RACKING

Misc. Tube Racking/Material Carts • 80’x25’ Row of Cantilever Material Racking • Qty of Pallet Racking • Ass’t. Parts Shelving, Storage Racking

VANCOUVER | AUGUST 15 & 16 AT 10AM AUGUST 22 & 23 AT 10AM | MONTREAL

5

BROWN AND BOGGS No. 773 8’ Mechanical Shear • CHICAGO 62-P.B 4’ Mechanical Brake • BROWN AND BOGGS No. 189 6’ Mechanical Shear • EDWARDS TrueCut 8’ 3.25 Shear • BROWN AND BOGGS S44 Manual Metal Former • 1988 ACCURPRESS 717510 Press Brake • Qty of Manual Metal Fabricating Equipment • Qty of Arbour and Manual Presses w/Roll Formers, Grinders, Vises • Large Qty of Brake Dies • CHICAGO 4’ Manual Brake • RK MACHINERY 50 Ton Shop Press

STRUCTURES DEPARTMENT

Tool and Cutter Grinder • DOALL Manual Surface Grinder • JONES & SHIPMAN Centerless Grinder • CLAUSING 15” Shop Lathe w/2” Bore, DRO • COL-CHESTER Mascot 1600 Shop Lathe w/3” Bore, DRO • MAzAK Quickturn 15 CNC Lathe, s/n 60631 • LIAN FENG LF-BS12SP 12” Horizontal Band Saw • DOALL 2013-20 36” Throat Vertical Band Saw • FIRST LC-20VSG Turret Mill w/3-Axis DRO, Power Table • BOKO Universal Mill w/DRO • MODERN B-6GAV Turret Mill w/3-Axis DRO, Power Table • Large Qty of Indexing Heads, Tooling, Setup Blocks • (6) GENIE GS-2646 Scissor Lifts • Large Qty of Raw Material • KING 9”x18” Horizontal Band Saw • KING 21” Wood Vertical Bandsaw • BIRLEFCO LINDBERG Heat Treat Oven • PARK Chemical Heat Treat Oven • PYRADIA Heat Treat Oven • MILLER Syncrowave 351 Welder w/Cooler

MAINTENANCE DEPARTMENT

8

GROUND SUPPORT EQUIPMENT2008 STEWART & STEVESON GPU400/100 2000KW General Power Unit, s/n 46782771 • AIR-A-PLANE H6600D Heating Unit • KLEEN GUARD Portable Pressure Washer • Portable Flush Cart • Lavatory Service Cart • Large Qty of Air Hose, Power Cord, Work Lights • HYCOM HFK02 Rat Flow Control Kit • Rat Flow Control Kit

GENERALAIRFRAME TOOLING

Gear Pylon Hoists • Hydraulic Floor Jackets (up to 95 Ton) • CO Tester • Assorted MALABAR Cradles • Hoists • Ass’t. Pumps & Filters • (8) WINGRIP 40/60/80 ft. Kits • Pressure Temp Test Sets • (5) Fuel Venting Hose Kits • CONSPACE CDI-2000 Hardline Communication System • Ass’t. ENERPAC Hyd. Sets • Assorted Gauges/Adapt-ers/Hand Tools • (100+) Work Lights • HEPA Vacuums • Hyd. Testers • Pumps • Pallet Racking • CO Test Kit • Air Tools • (3) MALABAR Hyd. Jacks • Ass’t. Airframe Tooling • POWERDRAWER II Vertical Drawer Storage System • GENERAL Gen-Eye SD Video Snake • AIR-BUS B Loop Resistance Tester • Large Qty of Volt Me-ters, Tester • Large Qty of Sockets, Hole Saws • Large Qty @30 of Torque Wrenches • Vacuum Tester • Igniter Tester w/Qty of Slings • Large Qty of LISTA Cabinets • Large Qty of Air Tools • Crimpers, Wire Cutters, Insertion & Extraction Tools, Wire Strippers, Fall Restraint Harness • Conditioned Air Cart for 767 • MALABAR 793N 100 Ton Tripod Jack Set • MALABAR 8841 116 Ton Tripod Jack Set • MALABAR 8760 30 Ton Tripod Jack • TECH-MAN Tripod Jack Set • BAUER Hyd. Ground Power Unit • MALABAR 3761 10 Ton Tripod Jack • 6000psi Hyd. Ground Power Unit • SUNDSTRAND 5000psi Hyd. Power Unit • REGENT 100 Ton Tripod Jack Set


HEAT TREAT, SANDBLAST, PAINT SHOPS

WHEEL SHOP

(2) AIRPLUS Station Blast Booths • EMPIRE 48 ITT Automated Blast Station • BNP 50-6 Blast Cabinet • PROCECO Typhoon 26-36E Washer • PROCECO Typhoon Express Washer • Custom Wheel Coat-ing Line • 1991 SCHAFER-MASCHINEN Universal Bead Breaker • Shop Press w/Pneumatic Punch • WAYNE FORGE Heat Treat Oven • ENERPAC 50 Ton Shop Press • AERCOLOGY Down Draft Table • BAUER Tire Inflation Cages • BAUER Automated Lug Nut Station • ANDEC Elotest PL300 Wheel Testing Station • MAGNAFLUx Test Station • PEEN-A-MATIC Shot Peening System

AIRBUS A310 TOOLINGBootstrap Kit w/Cowl Hold Open Supports • Vertical Stabilizer Sling • CF6-80C2 Sling • Control Surface Protractor • T/R Cowl Sling

COMPLETE SET OF AIRBUS A330/A340 TOOLINGMLG Handling Spring • ENERPAC Hydraulic System • MLG Lifting Beam • MLG Spring Compressor • MLG Shock Absorber • FLAP TRACK 2, 3, 4, 5 Hoisting • COMPRESSION MLG Tool • Landing Gear Change Hoist • Hoist System • Reactor Tube Set • MLG Positioning Table • 2006 HYCOM 32700-62 • Hydraulic Hose Kit • Door Ballast Weight Kit • Lower Pivot Door Lifter • (2) Bootstrap Kits • TMH Airframe Part Holder • NLG R/I Kit • TMH Handling Pack / Exchanger • TMH Distance Strut - Frame 91 • DEDIENNE AEROSPACE Locating Tools, Rib 18 • T500 Engine Pedestals • Neutral Setting Tool • CLG R/I Hoist Trolley • APU Hoist • Rat Cage • TRENT Boot Strap - Aft Mount • TRENT Boot Strap - Fwd Mount • THS Actuator R/I Set • Pylon Lifting Beams • TRENT 700 Sling • Reactor Tube Set • Fan Cowl Safety Support • MLG Trolley Shackle • Optical Alignment Set • Pylon Hoisting Gear • MLG Door R/I Tool • R/I Tool Slat PCU • Engine Mount Support • PCU Slat R/I • Pylon Lifting Beam • APU Stands • Nose Cowl Sling • R/I Remote Chiller & R/U • THS Actuator R/I Set • Hydraulic Hose Kit • R/I Tool - Flap PCU • Nose Landing Gear Tool • Brace Hold Open Cowls • Sling System • Sling - R/I Hinged Cowls • THRUST Reverser Cowls Sling • R/I THS Apron • R/I Fire Ext Bottles • Reactor Tube Set • NLG Stressing Fixture • MLG Side Stay Gag Tool • Gag Shock Absorber • R/I - Drag Stay - NLG • Wheel Chocks • Rat Hose Supp. • Sling System • Lifting Gear - Thrust Reverser • FLYAWAY CFM56-5C Engine Change Kit • CFM56-5C Engine Change Kit • Gag Bogie Beam • TRENT 500 Adapter Sling • Handling Pack / Exchanger • Bootstrap Kit • T/R Lifting Beam • Horizontal Stab Strut • Engine Exhaust Mixer Sling • R/I Flap PCU • APU Hoist • Set of T/R Dummies • MLG Door R/I Tool • Tow Bar for A340 • Cradle R/I - Pack Exchanger • Access Platform • Assorted Cradles • Assorted Slings • Pintle Pin R/I • A340 Pylon Trolley • A330 Pylon Trolley [Further detailed at www.maynards.com]

7

COMPOSITE SHOPATACS 8024-2 Hot Bonder Controller • ATACS 8010 Hot Bonder Controller • (4) APPLIED HEAT A150 Hot Bonder Controller • Heating Blankets • BUSY BEE Planer and Jointer • BUSY BEE Table Saw • Vertical Bandsaw w/ 24” Throat • Curing Ovens • Vertical Bandsaw w/24” Throat • Assorted Woodworking Hand Tools w/Sanders, Drills, Heat Guns, Clamps, Etc.

CALIBRATION ROOMShop Press • TENNY Heat Treat Oven • METTLER TOLEDO Digital Scale • WEBBER Gage Block Set • Set of Micrometers from 1” to 12” • STARRETT Sig-ma Optical Comparator • View of Assorted Variable Power Sources, Oscilliscopes, Test Equipment • NORBAR Torque Tester • NORBAR Torque Tester • SHURLIFT Shop Press • PACIFIC Scale • SMITH INDUSTRIES Automatic Control Unit

6

LAB EQUIPMENTFISHER SCIENTIFIC 93-409sq Safety Flow Fume Hood • Set of PYREx Beakers • BARNSTEAD Water Filtration System • Assorted Lab Equipment • THERMO JARRELL ASH Atom Scan 25 Sequential Plasma Spectrometer • 4-Station Mixer

FILTRATION ROOMPH Reader • AVERY FILTER CO. Filter Press • Assorted Tanks

EMBRAER TOOLING(3) REGENT 50 Ton Hydraulic Aircraft Jacks • EMBRAER 175/190 Tow Bar • EMBRAER 50 Ton Tripod Jack

Auction 2: Wed & Thurs, Aug. 22 & 23 10am Each day (EdT)Location: 720 boulevard de la Côte-Vertu dorval (Montreal), qCPreview: Tues, Aug. 21 from 9am-5pmContact: Mike McIntosh 416-242-3560

SALE SITE•

VANCOUVER | AUGUST 15 & 16 AT 10AM

DIRECTIONS: ONLY 10 MINUTES FROM PIERRE ELLIOT TRUDEAU INTERNATIONAL AIRPORT Take Autoroute 40 towards Montreal; Take exit 4 toward Laval/Lachine/Autoroute 13/Montée de Liesse; Take exit 6 for Autoroute 40 toward Québec; Turn right onto Montée de Liesse; Take the 1st right onto Boulevard de la Côte-Vertu

5

BROWN AND BOGGS No. 773 8’ Mechanical Shear • CHICAGO 62-P.B 4’ Mechanical Brake • BROWN AND BOGGS No. 189 6’ Mechanical Shear • EDWARDS TrueCut 8’ 3.25 Shear • BROWN AND BOGGS S44 Manual Metal Former • 1988 ACCURPRESS 717510 Press Brake • Qty of Manual Metal Fabricating Equipment • Qty of Arbour and Manual Presses w/Roll Formers, Grinders, Vises • Large Qty of Brake Dies • CHICAGO 4’ Manual Brake • RK MACHINERY 50 Ton Shop Press

STRUCTURES DEPARTMENT

Tool and Cutter Grinder • DOALL Manual Surface Grinder • JONES & SHIPMAN Centerless Grinder • CLAUSING 15” Shop Lathe w/2” Bore, DRO • COL-CHESTER Mascot 1600 Shop Lathe w/3” Bore, DRO • MAzAK Quickturn 15 CNC Lathe, s/n 60631 • LIAN FENG LF-BS12SP 12” Horizontal Band Saw • DOALL 2013-20 36” Throat Vertical Band Saw • FIRST LC-20VSG Turret Mill w/3-Axis DRO, Power Table • BOKO Universal Mill w/DRO • MODERN B-6GAV Turret Mill w/3-Axis DRO, Power Table • Large Qty of Indexing Heads, Tooling, Setup Blocks • (6) GENIE GS-2646 Scissor Lifts • Large Qty of Raw Material • KING 9”x18” Horizontal Band Saw • KING 21” Wood Vertical Bandsaw • BIRLEFCO LINDBERG Heat Treat Oven • PARK Chemical Heat Treat Oven • PYRADIA Heat Treat Oven • MILLER Syncrowave 351 Welder w/Cooler

MAINTENANCE DEPARTMENT

8

GROUND SUPPORT EQUIPMENT2008 STEWART & STEVESON GPU400/100 2000KW General Power Unit, s/n 46782771 • AIR-A-PLANE H6600D Heating Unit • KLEEN GUARD Portable Pressure Washer • Portable Flush Cart • Lavatory Service Cart • Large Qty of Air Hose, Power Cord, Work Lights • HYCOM HFK02 Rat Flow Control Kit • Rat Flow Control Kit

GENERALAIRFRAME TOOLING

Gear Pylon Hoists • Hydraulic Floor Jackets (up to 95 Ton) • CO Tester • Assorted MALABAR Cradles • Hoists • Ass’t. Pumps & Filters • (8) WINGRIP 40/60/80 ft. Kits • Pressure Temp Test Sets • (5) Fuel Venting Hose Kits • CONSPACE CDI-2000 Hardline Communication System • Ass’t. ENERPAC Hyd. Sets • Assorted Gauges/Adapt-ers/Hand Tools • (100+) Work Lights • HEPA Vacuums • Hyd. Testers • Pumps • Pallet Racking • CO Test Kit • Air Tools • (3) MALABAR Hyd. Jacks • Ass’t. Airframe Tooling • POWERDRAWER II Vertical Drawer Storage System • GENERAL Gen-Eye SD Video Snake • AIR-BUS B Loop Resistance Tester • Large Qty of Volt Me-ters, Tester • Large Qty of Sockets, Hole Saws • Large Qty @30 of Torque Wrenches • Vacuum Tester • Igniter Tester w/Qty of Slings • Large Qty of LISTA Cabinets • Large Qty of Air Tools • Crimpers, Wire Cutters, Insertion & Extraction Tools, Wire Strippers, Fall Restraint Harness • Conditioned Air Cart for 767 • MALABAR 793N 100 Ton Tripod Jack Set • MALABAR 8841 116 Ton Tripod Jack Set • MALABAR 8760 30 Ton Tripod Jack • TECH-MAN Tripod Jack Set • BAUER Hyd. Ground Power Unit • MALABAR 3761 10 Ton Tripod Jack • 6000psi Hyd. Ground Power Unit • SUNDSTRAND 5000psi Hyd. Power Unit • REGENT 100 Ton Tripod Jack Set


9

TEST EQUIPMENT, AVIONICS, GAS, BATTERY TEST

(6) GENIE GS-2646 Scissor Lifts • YALE ERC050 4800# Electric Forklift “EE” Certified • (2) Forklift Safety Cages • TOYOTA 42-GFGCU25 3500# LPG Forklift w/189 Lift • CLARK TA 30F Propane 3000# Tugger • HYSTER H155XL 15,000# Forklift w/8600hrs, Dual LPG Tanks • INTERNATIONAL HARVESTER T300-SL Diesel Tugger • 2006 JLG E600JP 60ft 500# Zoom Lift • TAYLOR DUNN Elec-tric Utility Carts • Assorted Electric and LPG Forklifts and Order Pickers

MOBILE / GROUND SUPPORT EQUIPMENT

4

SEP ALbRET POuRTEAu COMPLETE WIdE bOdy MAINTENANCE dOCkING SySTEM1999 SEP Maintenance Portable Platform System for Wide-Body Aircraft with light al-loy docks, anti skid aluminum flooring, all adjustable railings, All docks w/ Stabilizing jacks, all docks have utility networks and hydraulic systems including compressed air and electrical distribution, motorized exter-nal wing and PHR docks, crane supported over-head work platforms [Drawings available at www.maynards.com]

Wing and Tail Stand • 2002 ENDURON INC C02000 A319/A320/A321/B737 Wing Stand, s/n E02-909L • 8’x10’ Lift Platforms • Large Qty of Production Stairs • Large Qty of PLATOLIFT Cargo/Airframe Access Stands

CLEVELAND Tramrail 10 Ton Overhead Crane with Adjust-able Height Work Platform w/Approx. 250’ Span • CLEVE-LAND Tramrail 10 Ton Overhead Crane w/Approx. 250’ Span • SPACEMASTER 1 Ton 30’ Span Overhead Crane

WING STANDS

OVERHEAD CRANES

RACKING

Misc. Tube Racking/Material Carts • 80’x25’ Row of Cantilever Material Racking • Qty of Pallet Racking • Ass’t. Parts Shelving, Storage Racking

VANCOUVER | AUGUST 15 & 16 AT 10AM AUGUST 22 & 23 AT 10AM | MONTREAL

767/777 - A320 - GENERIC JACK/COWL STANDS

AIRCRAFT SUPPORT EQUIP.THRUST Reverser Dollies • B767 Pylon Stands • B767 Fan Cowl Stands • CORE Cowl Stands • (12) MALABAR Complete Set of Jack Stands for 767 w/ Nose, Wing, Tail Stands • Large Qty of Cargo/Airframe Access Stands • (2) Wing Tank Drain Carts • MALABAR Set of Jack Stands for the A320/A330/A340 • Large Qty of Fiberglass Step Ladders • Large Qty of Airframe Support Equipment w/High Capacity Floor Jacks, Work Lights, Spill Kits, HEPA Vacuums, Extension Cord Reels, Exhaust Fans, etc. • Large Qty of Assorted Material Carts • AMS Hydraulic Pump Cart • (4) JETPOWER PWM2 400HZ Ground Power System Carts • (4) Mobile Engine Stands • (2) Reverse Thruster Stands • (3) A320 Cargo Access Stands • 737 Complete Jack Set • Engine Removal Gantry • A320 Wing Docks • Engine Stand • (6) Assorted Pressure Washers

WING STANDS

(2) BURRARD MECHANI-CAL Wing Stands • 747/DC 10 Permanent Scaffolding • (2) A320 Tail Docks • A320 Entry Stands

3

(4) SKYJACK SJ-111-3220 Scissor Lifts • (2) SKYJACK SJ-111-3219 • (5) GENIE GS 26/46 • (4) GENIE GS 19/30 • (2) SKYJACK SJ-111-3224 • (4) SKYJACK SJ-1007-20EE • 2005 JLG 20DVL Manlift • GENIE GS 20/32 • GENIE Z-45/25J • JLG 35 Electric 35’ 500# Boom Lift • 2007 GENIE S-65 65’ 500# Boom Lift w/1655hrs, s/n S6007-15625 • 2006 GENIE Z34/22M Boom Lift w/475hrs, s/n Z34N06-5379 • 2005 GENIE Z-45/25J Boom Lift w/2250hrs, s/n Z452505-25563 • GENIE Z-45/25J Boom Lift • BRODERSON IC-200-1C 30,000# Mobile Crane w/1066hrs, Raco Digital Scale, s/n 104218 • 1997 FORD F350 Crew Cab Scissor Lift Truck w/Plafolift 800# Lift • HYSTER S50XL 5000# Forklift • TAYLOR DUNN Electric 4-Seat Cart • CLARK FCT30 Propane Tow Cart, s/n G408 • YALE GLP100M 8650# LPG Forklift, 1600hrs, s/n C813D03017Y • MOTREC Electric Utility Cart • (3) MOTREC Electric Utility Carts • YALE ERC60 5000# Electric Forklift, 164 Lift, s/n E108V12484X • HUFF Tow Tractor • RAYMOND Electric Pallet Jack • TENNANT 7200 Ride On Floor Sweeper w/1450hrs • HYSTER H80XL2 7700# LPG Forklift w/172” Lift, 2690 hrs

MOBILE EQUIPMENT

10


For complete information visit us on the web atwww.maynards.com

2

BOEING 767 TOOLING

AIRBUS A320 TOOLING

LARGE QTY. OF AVIONICS & MISC. EQUIPMENT & TOOLING

NLG Lower Seal Tool • Gear Jack Assembly Tool • I/B/0/B T/E Flap Lock • CF6-80 Pylon Strut Sling • MLG Trunnion Pin Equipment • Accessory Bay Platform • HOIST B767 Flap Bracket • Bulk Cargo Door Clamp • NLG Spring Extender • Portable Sand Blaster • MLG Side Brack Springs • Pressure Washer Kit • Spring Extender Equip-ment • Water Ram Tool • Hold Open • Rig Prox Sensors Set • AFT Flap to INBD. Restraint • HOIST B767 Flap Bracket • MLG Side Strut Sling • MLG Downlock Stop Shim Jig • Load Positioner • Fuel Leak Test Plug • MLG Retract Pin Puller • Hori-zontal Stab Pivot BRG.R/I Kit • Heat Exchanger Cleaning Wands • MLG Side Strut Spring Compressor • NLG A-Frame Support • Load Positioner Adapter • APU Sling • MLG Lower BRG Seal Kit • Cradle Adapter • Jacking Hinge H Set • Actuator Pin Kit • Bulk Cargo Door Clamp • MLG Retract Actuator Spring • Lock MTCE • Cargo Door Sling • NLG R/I Kit • Pass. Slide Dummy Kit • Aileron Rigging Bar • Inlet Cowl Sling • AILERON Rig Bar • JT9D/PW4000 T/R Sling • JT9D/PW4000 T/R Sling • Cabin Door Dummy Weight Kit • Qty of Hoist Adapters • APU Cradle • Stab Trim Relief • CF6-80 T/R Sling

Brake Puller - Main Landing Gear • Outboard Rigging Kit • Fuel Tank Leak Check • (3) Aircraft Storm Protect Kit • Protractor - Control Sur-face Deflection • THRUST Reverser Sling • APU Hoist • BALLAST PAX Door Weights • T/R Hold Open Set • CFM-56 Bootstrap Kit • CF6-80 Inlet Cowl • Elevator Sling • N4 R/I Bushing Kit • Elevator Locking Tool • AILERON Lifting Frame Assy • BALLAST PAX Door Weights • Elevator Neutral Gauge • Flap Rigging TRA Board • TR3 Flap Rig Board • TR2 Flap Rig Board • Leading Edge Slat Sling •

Leading Edge Slat Sling • RAT Protection Screen

MAINTENANCE / FAbRICATION EquIPMENTCHICAGO 4’ Hand Brake w/Pexto 4’ Hand Shear • IBARMIA TL-25 Gear Head Drill • Large Qty VIDMAR Cabinets • Large Qty of JUSTRITE Flammable Storage Cabinets • (2) DEVILBISS Down Draft Booths • Mechanics Jacks • Work Benches • ELLIS 1800 12” Horz. Band Saw • TRAYTOP Engine Lathe • 50 Ton Shop Press • DELTA Combo Sand/Grinder w/Dust Collector • DELTA Drill Press • KING Table Saw • MILLER Syncrowave Welder • ESAB MigMaster 250 Welder • DEVILBISS 15x40x8’ Spray Paint Enclosure • (3) SPECTRATHERM 4000s Portable UV Drying Lights • (2) GRAYCO Airless Paint Mix-ers • TORIT 12x10x8’ Downdraft Spray Booth • Assorted Paint Mixers, Pumps, Guns • DAREx XT3000 Tool Sharpener • HYD-MECH S10 Horizontal Bandsaw, s/n W0998137 • JACK MILL J40 Tool Grinder • KONDIA Powermill FV-1 Turret Mill w/3-Axis DRO • CA-zENEUVE 360HV-X Engine Lathe w/2-Axis DRO, 2” Spindle • MICROWEILY TY-1860TS Engine Lathe w/2-Axis DRO, 3” Spindle • Misc. Lathe Tooling, Collets, Faceplates, Di-viding Heads, Precision Vises, End Mills, V-Blocks, Clamps, Heli Coil Kits, Shims, Etc. • ACCUTEC 2500M Universal Mill w/3-Axis DRO, 250# Electric Hoist, s/n 1088148 • 2007 EUMEGA MDV4.5 Turret Mill w/3-Axis DRO, Power Table • Micrometers, Misc. Test Equipment • TOS VS32E Gear Head Drill • ALL STEEL 10G-4 Hyd. Shear w/Digital Con-trols, s/n M-101273 • RACK ENGINEERING 5-Section Pull Out Material Rack w/2000# Cap. per Section • DECKEL Pantograph • Large Qty of Bushings, Gauges, Small Tool-ing for Aircraft • WIEDEMANN RZ41M Rotary Turret Punch • RK MACHINERY 30 Ton Shop Press • PExTO Corner Knotcher • PExTO Hand Punch • ALL STEEL 25-4 4’ 25 Ton Hyd. Brake, s/n 72082 • Large Qty of Ass’t. Brake Dies • Misc. Drill Presses, Cleat Folders • CINCINNATI 90CB 8’ 90 Ton Hyd. Press Brake, s/n 47006 • 2004 GASPARINI CO 3704 12’ Shear w/4.6mm Cap., s/n 1789.1510 • TORIT Down Draft Table • PExTO Plate Rolls • STARTRITE • 20 RWS Vert. Bandsaw • ECKOLD Piccolo Punch • DOALL 3613-1 36” Throat Vert. Bandsaw • TORIT Dust Collector • (2) Combo Sand/Grinder • KING Spindle Sander • Portable Dust Collector • Shot Blast Cabinet • WILTON Drill Press • IMET Cold Cut Saw • (3) BALDOR Dbl End Grinders • Parts Crib w/Ass’t. Measuring Equipment, Testers, Precision Tooling, Specialized Job Boxes, Precision Fasteners, Air Tools • SPACEMASTER 2 Ton Overhead Crane w/40’ Span • TORIT 10x40’ 10-Section Spray Booth • BOSCH Router Table • DOALL 36” Throat Vert. Bandsaw • HOLzHER 1265 Supercut Vert. Panel Saw • GENERAL 15-250M1 Planer • (2) TORIT Dust Collec-tors • NIAGARA 18 Gauge 10’ Mechanical Shear • MEC ART 30x40’x9’ Modular Clean Room • (5) TRISK UV Drying Lights • 2002 PYRADIA 450*C 10’x30’ Curing Oven

CHILLER ROOMB/E AEROSPACE R134A Coolant Flushing Station, s/n 4014-001

TOILET ROOMROUSSAU 29S Sonic Washer • R&M 1.5 Ton Crane w/30’ Span • JET POWER 400HZ Ground Power System, s/n ED-5113

FABRIC SHOPGERBER S3200 CNC Fabric Cutting Table • ROLAND SolJet ProIIV Large Format Printer • MIMAKI CF2-0912 Router Table • NEBLAM 1100-ee Laminator

COMPOSITE SHOPDENRAY Down Draft Sanding Table • DELTA Mitre Saw • DELTA Combo Sand/Grinder • GENERAL Vertical Bandsaw • GRECO Heat Lamp Vacuum Applicator w/5’x7’ Cap.

PLUMBING SHOPFLUKE 8845A Precision Multimeter • SORENSEN DCR 40-13B Power Supply • BK PRECISION 1730A 30V/3A DC Power Supply • PACE MBT SensaTemp Soldering Iron Controller • SCIENSCOPE IL-F01-150plus Fiber Optic Illuminator • BAUSCH & LOMB StereoZoom 4 0,7x-3.0x Stereo Microscope • WAVETEK Mod. 19 2Mhz Sweep/Func-tion Generator w/HeathKit Mod. IN-11 Decade Resistance Controller • SORENSEN QSB28-8 Power Supply • YAMATO DX602 Drying Oven • (2) Crimping Machines • CANADA GENERAL ELECTRIC 1100*F Heat Treat Oven • FAMCO 5CR Arbour Press • LINDBERG 1600*F Heat Treat Oven • (2) PYRADIA P10P038038038HMTXB 1250*F Heat Treat Ovens • ROCKWELL Hardness Tester

SEWING ROOM / OVEN ROOMSINGER 591 Sewing Machine • SINGER Singer 211 Sewing Machine • JUKI LU-563 Sewing Machine • SINGER 842 • JUKI LU-563 • SINGER 211 • Ass’t. Variable Power Sources • Test Oven Bench w/Variable Power Sources, Precision Thermometers, Test Ovens, Temp. Controllers

11

Auction 1: Wed & Thurs, Aug. 15 & 16 10am Each day (PdT)Location: 6001 Grant McConachie Way (North Service Rd.) Richmond (Vancouver), bCPreview: Tues, Aug. 14 from 9am-5pmContact: Mike McIntosh 416-242-3560

DIRECTIONS: ONLY 5 MINUTES FROM VANCOUVER INTER-NATIONAL AIRPORT - FOLLOW SIGNS FOR VANCOUVER; TURN LEFT ON TEMPLETON; LEFT ON NORTH SERVICE RD., DESTINA-TION WILL BE ON THE RIGHT.

SALE SITE

•

AUGUST 22 & 23 AT 10AM | MONTREAL



www.maynards.com


T. 248.254.9999 | F. 248.254.9995

www.hilcoind.com

PUBLIC AUCTIONMaynards Industries 250 H Street PMB 207 Blaine, WA 98230


Industries Ltd.


AN UNPRECEDENTED OFFERING OF COMMERCIAL AIRCRAFT (MRO) MAINTENANCE, REPAIR AND

OVERHAUL TOOLING & EQUIPMENT


Wed. & Thurs.Aug. 15 & 16, 2012

10am6001 GRANT McCONACHIE WAY,RICHMOND, BRITISH COLUMBIA

EACH DAY(PDT)


Wed. & Thurs.Aug. 22 & 23, 2012

10am720 BOULEVARD DE LA CÔTE VERTU,

DORVAL, QUEBEC

EACH DAY(EDT)

AVEOS FLEETPERFORMANCE

INC.AIR FRAME DIVISION

2 HANGARFACILITIESOVER 600,000SQ.FT.

4 DAYS2 LOCATIONSPUBLIC AUCTION


4 DAYS2 LOCATIONS

AUCTION TERMS & CONDITIONS | PAYMENT: 25% NON-REFUNDABLE DEpOsit ON AwARD OF BiD, BALANcE withiN 48 hOURs. pAymENt is cAsh, cAshiER’s chEcK, cERtiFiED chEcK, wiRE tRANsFER, cOmpANy chEcK ONLy iF AccOmpANiED By A LEttER FROm yOUR BANK gUARANtEEiNg AmOUNt OF chEcK FOR DEpOsit AND/OR pAymENt iN FULL. NO pERsONAL chEcKs. FULL pAymENt mUst BE mADE BEFORE REmOvAL OF pURchAsE. REMOVAL: LAst DAy OF REmOvAL is FRiDAy, sEptEmBER 21, 2012. AND As FURthER DEFiNED iN thE sALE cAtALOgUE. EvERythiNg is sOLD “As is, whERE is.” ALL sALEs FiNAL. cOst AND REspONsiBiLity FOR REmOvAL OF pURchAsE REmAiNs with thE pURchAsER. EvERy EFFORt wiLL BE mADE tO FAciLitAtE REmOvAL. whiLE qUANtitiEs AND DEscRiptiONs ARE BELiEvED tO BE AccURAtE, thE AUctiONEER, OwNERs OR cOUNsEL mAKE NO wARRANtiEs OR gUARANtEEs EithER ExpREssED OR impLiED As tO AUthENticity, gENUiNENEss OF, OR DEFEcts iN ANy LOt AND wiLL NOt BE hELD REspONsiBLE FOR ANy ADvERtisiNg DiscREpANciEs OR iNAccURAciEs. NO wARRANtiEs whAtsOEvER ARE mADE As tO cONDitiON, mERchANtiBiLity OR FitNEss FOR UsE OF ANy itEm. mAy wE sUggEst yOU tAKE FULL ADvANtAgE OF thE pREviEw AND iNspEctiON pERiOD | SALE SubjECT TO AddITIONS, dELETIONS & PRIOR SALES. PLEASE ChECk AVAILAbILITy OF EquIPMENT | BUYERS PREMIUMS: 15% ON-SITE, 18% ON-LINE | ALL SALES IN CANAdIAN FuNdS


Aug. 15 & 16, 20126001 GRANT McCONACHIE WAY,RICHMOND, BRITISH COLUMBIA

AVEOS FLEETPERFORMANCE INC.(AIR FRAME DIVISION)


Aug. 22 & 23, 2012720 BOULEVARD DE LA CÔTE-VERTU

DORVAL, QUEBEC

ONSITE &

WEBCAST



www.maynards.com


T. 248.254.9999 | F. 248.254.9995

www.hilcoind.com


Industries (1991) Inc.





MAJOR TOOLING & MRO SPECIFICASSETS AVAILABLE FOR PRIOR SALE

MAJOR TOOLING &MRO SPECIFIC ASSETS

AVAILABLE FOR PRIOR SALEVisit www.maynards.com for Details

4 days public auction 4 days vancouver/aveos... · co 3704 12’ shear w/4.6mm cap., s/n 1789.1510...

Documents