Warning:Make sure screws are firmlyinstalled to ensure safe riding.

Adult Assembly Instruction

Insert the spoiler securely around seaback handle. Next, push down seaback handle together with spoiler inside holes at the back of the car.

AssemblyInstructions :

E

Item No. 046581

Foot Pedal:

*Optional foot pedals are included and may be added to ride-on after rocking board is removed.

#046581- Mickey 4-in-1 RO- IM- E-Walmart.com-180215 #046581- Mickey 4-in-1 RO- IM- E-Walmart.com-180215

Warning!

1. Batteries must be handled by adults only. 2. Always remove exhausted batteries.3. Use AA size batteries only.4. Alkaline batteries are recommended.5. Always remove batteries when the unit is not going to be used

for an extended period of time.6. When replacing new batteries, always replace both batteries.7. Do not mix old and new batteries.8. Do not mix alkaline, Standard (Carbon-zinc), or Rechargeable (Nickel-Metal Hydride) batteries.9. Do not attempt to recharge non rechargeable batteries.

1. 4-in-1 Activity Ride-On uses 2 x "AA" batteries to operate. The battery compartment is shown in Figure A.

2. To replace batteries, use a philip screwdriver to unscrew the battery cover as shown in Figure B. Carefully insert batteries to place them according to signs shown (+, -).

Battery Instructions & Handling:

Demo Batteries included

Figure A

Use 2 x1.5V AA / LR6 batteries

Figure B

+

_

_

+

FCC Statement (United States Only)• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• NOTE: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio/TV technician for help.

Parental guidance and supervision are required at all times.Please read all instructions before assembly and use.

• Tools needed for assembly: Phillips screwdriver (not included).• Adult assembly is required. This package contains small parts which are for adult assembly only.

Care should be taken when unpacking and assembling of toy.• WARNING: To be assembled by adults only.

4 pcs.

Parts List Quantity

1 pc.

1 pc.

J

K

L

M5 x 27mm L KJ JJJ

Fo

ot pedal flips up or down.

A

I

F

E

A

Manufactured by: DONGGUAN KIDDIELAND INDUSTRIAL LIMITED© COPYRIGHT. ALL RIGHTS RESERVED.

Licensee: Kiddieland Toys Ltd.14/F, Bank of America Tower, 12 Harcourt Road, Central, Hong Kong.Fax: (852) 2116-0500 Visit us at www.kiddieland.com.hk

© Disney. Visit DisneyJunior.com

• This package contains small parts which are for adult assembly only. Care should be taken while unpacking and assembling this toy. This product is designed for a child from 12 to 36 months of age and weight not exceeding 22.7 kg (50 lbs) as there is insufficient strength to support overweight.

WARNING:

4-in-1 Mickey4-in-1 Mickey

Activity Ride-OnActivity Ride-OnWith interactive electronic activities to play fun sounds and lively music!With interactive electronic activities to play fun sounds and lively music!

12-36 months

1. Product is designed for children from 12 to 36 months of age. Rider’s weight must not exceed 22.7 kg (50 lbs) as there is insufficient strength to support overweight.

2. Product is designed to seat 1 child at a time to avoid injuries.3. Parental guidance and supervision are required.4. Keep small parts and plastic bag out of reach of children as they

may pose suffocation and potential choking hazard.5. Adult assembly and installation of all parts are required to ensure

safety.6. Batteries to be handled by adults.7. Observe children when they are riding and never allow the child to

play with the product near streets, crossroads, all traffic areas, swimming pools, stairs, sloped driveways, hills and alleys. The product is intended for indoor use only.

8. Wipe the surface with dry cloth only. Do not immerse product in water.

9. Occasionally check to see that the nuts and bolts on all parts are tight and secure.

10. Without regular check of the product, it will cause overturn or fall.11. The child should ride the car only on a flat and smooth surface.12. Accidents causing danger may occur if the product is not

correctly assembled.13. Shoes must be worn when in use.14. The toy should be used with caution since skill is required to

avoid falls and collisions causing injury to the children or third parties.

*Optional foot pedals are included and may be added to ride-on after rocking board is removed.

• WARNING: To be assembled by adults only.

* There may be extra spare pieces included for these parts.

Part List & Quantity

3 pcs.

1 pc.

1 pc.

A

C 1 pc.

D 1 pc.

E

F

M5*35PM

2 pcs.B M5*20MM G

1 pc.

1 pc.

H

1 pc.I

How To Set Up The Safety Rail:

• Insert seat back (Part G) into the hole at the back of the seat.

1

G

• Turn ride-on over and secure with screws and bolts.

• Locate the knob at the rear end and press down to insert safety rail. Push it down completely.

3

Press DownPress Down

C

• Repeat Step 3 on the reverse rear side.

4

D

Press DownPress Down

• Close safety rail and lock safety rail buckle.

52

BB

How To Remove Safety Rail:

How To Remove Safety Rail Lock:

• Press button to unlock safety rail buckle, and open up safety rail.

• Locate the knob at the rear end and press down to release safety rail. Pull it out completely.

• Repeat Step 2 on the reverse rear side.

How To Change Seat Back:

• Turn ride-on over. Remove screws and keep them in a safe place.

• Take out seat back with push-handle.

• Insert ride-on seatback handle securely in place.

• Carefully unscrew and remove steering wheel.

• Take out the safety rail lock. • Insert steering wheel back in place, and secure with screw.

31 2

Press DownPress Down

321 2

321

H