4 mb程序和数据存储器(codesys和 qvis项目文件) 16 kb非易...

3
可视化PLC 5.7" 显示屏, PROFINET - VT250 系列 (经济型) VT250-57P-L7-PNM Edition • 2017-07-01T05:40:30+02:00 1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com 型号 VT250-57P-L7-PNM 货号 6828016 Function PLC含集成触摸屏显示 Display / Touch Display TFT LCD colour display 触摸屏 电阻式 Active screen area 5.7'' (approx. 118 * 89 mm) Resolution (pixels) 320 × 240 (240 * 320 with edgewise design) Number of usable colours 65536 colours Controller Processor ARM9, 32 bit, 200 MHz 编程和数据存储 4 MB (CoDeSys / QViS) Remanent memory 16 kB SDRAM Add-on memory 1 x SD/MMC memory card 实时时钟 操作系统 rcX 编程 CODESYS V.3 Interfaces Ethernet Double (integrated switch) Protocols PROFINET (Controller/Master) Modbus RTU (Master/Slave) USB Device Serial RS232 / RS485 Power supply 额定值 24 VDC反极性保护,最大值0.35 A Admissible voltage range 20.4…28.8VDC General data Operating ambient conditions 0…50 °C, 10…90 % relative humidity, non- condensing Storage ambient conditions -20…60 °C, 10…95 % relative humidity, non- condensing 认证 CE, cULus 防护等级 前端IP65 后端 IP20 Dimensions Front (W x H x D) 212x156x50mm Cut-out (W x H) 198x142mm 重量 approx. 0.7 kg TFT LCD 彩色显示器 5.7",320 × 240像素,65000色 电阻式触摸屏 2 x RJ45实时以太网接口 串行接口RS232/485和USB设备 PROFINET 主站 可按照IEC 61131-3使用CODESYS V3编程 32位200 Mhz RISC处理器 4 MB程序和数据存储器(CODESYS和 QViS项目文件) 16 kB非易失内存 SD/MMC 存储卡 防护等级 IP65,正面 The HMI touch panel with a 5.7“ TFT display can be used both as operator and control terminal. The control software applied is CoDeSys V3 and approved according to the international standard IEC 61131-3. QViS is the software used for visualization and especially developed for embedded systems. The exchange of variables between control unit and visualization is implemented via interface. The HMI panel is equipped with all relevant RT Ethernet and fieldbus systems.

Upload: others

Post on 04-Feb-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 4 MB程序和数据存储器(CODESYS和 QViS项目文件) 16 kB非易 …pdb2.turck.de/repo/media/_cn/Anlagen/Datei_EDB/edb... · 2017-07-03 · 4 MB程序和数据存储器(CODESYS和

可视化PLC5.7" 显示屏, PROFINET - VT250 系列 (经济型)VT250-57P-L7-PNM

Editi

on •

2017

-07-

01T0

5:40

:30+

02:0

0

1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

型号 VT250-57P-L7-PNM货号 6828016

Function PLC含集成触摸屏显示

Display / TouchDisplay TFT LCD colour display触摸屏 电阻式Active screen area 5.7'' (approx. 118 * 89 mm)Resolution (pixels) 320 × 240 (240 * 320 with edgewise design)Number of usable colours 65536 colours

ControllerProcessor ARM9, 32 bit, 200 MHz编程和数据存储 4 MB (CoDeSys / QViS)Remanent memory 16 kB SDRAMAdd-on memory 1 x SD/MMC memory card实时时钟 是操作系统 rcX

编程 CODESYS V.3

InterfacesEthernet Double (integrated switch)Protocols PROFINET (Controller/Master)

Modbus RTU (Master/Slave)USB DeviceSerial RS232 / RS485

Power supply额定值 24 VDC反极性保护,最大值0.35 AAdmissible voltage range 20.4…28.8VDC

General dataOperating ambient conditions 0…50 °C, 10…90 % relative humidity, non-

condensingStorage ambient conditions -20…60 °C, 10…95 % relative humidity, non-

condensing认证 CE, cULus防护等级 前端IP65

后端 IP20

DimensionsFront (W x H x D) 212x156x50mmCut-out (W x H) 198x142mm重量 approx. 0.7 kg

■ TFT LCD 彩色显示器■ 5.7",320 × 240像素,65000色■ 电阻式触摸屏■ 2 x RJ45实时以太网接口■ 串行接口RS232/485和USB设备■ PROFINET 主站■ 可按照IEC 61131-3使用CODESYS V3编程■ 32位200 Mhz RISC处理器■ 4 MB程序和数据存储器(CODESYS和

QViS项目文件)■ 16 kB非易失内存■ SD/MMC 存储卡■ 防护等级 IP65,正面

The HMI touch panel with a 5.7“ TFT displaycan be used both as operator and controlterminal. The control software applied is CoDeSys V3and approved according to the internationalstandard IEC 61131-3. QViS is the software used for visualizationand especially developed for embeddedsystems.

The exchange of variables between controlunit and visualization is implemented viainterface. The HMI panel is equipped with allrelevant RT Ethernet and fieldbus systems.

Page 2: 4 MB程序和数据存储器(CODESYS和 QViS项目文件) 16 kB非易 …pdb2.turck.de/repo/media/_cn/Anlagen/Datei_EDB/edb... · 2017-07-03 · 4 MB程序和数据存储器(CODESYS和

可视化PLC5.7" 显示屏, PROFINET - VT250 系列 (经济型)VT250-57P-L7-PNM

Editi

on •

2017

-07-

01T0

5:40

:30+

02:0

0

2 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Connection and pin assignment

供电Nominal voltage 24 VDCNominal current 0.35 A

针脚配置

PROFIBUS / MPI 总线接口SUB-D female connector, 9-pole

针脚配置

以太网端口2 x RJ45 jackIntegrated switch10/100 Mbps

针脚配置

RS232接口SUB-D male connector, 9-poleAttention:Do not connect pins 1, 4, 6 and 9 when using RS232!

针脚配置

Page 3: 4 MB程序和数据存储器(CODESYS和 QViS项目文件) 16 kB非易 …pdb2.turck.de/repo/media/_cn/Anlagen/Datei_EDB/edb... · 2017-07-03 · 4 MB程序和数据存储器(CODESYS和

可视化PLC5.7" 显示屏, PROFINET - VT250 系列 (经济型)VT250-57P-L7-PNM

Editi

on •

2017

-07-

01T0

5:40

:30+

02:0

0

3 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

USB 接口USB deviceService interface

针脚配置