42 43 fifty cool years coolsidcoolside evo · 42 43 c_gnr_0413 rcgroup spa • 19632013...
TRANSCRIPT
42 43
C_G
NR
_04
13
RCGROUP SpA • 19632013 fiftycoolyears
coolsidCOOLSide evO
4,5 ÷ 53,1 kWINVERTER
E CCHILLEDWATER
FRONTFLOWR410A
f i f t y c o o l y e a r s
1 9 6 3 2 0 1 3
new
AIR COnDItIOnInG SyStEMS FOR HIGH HEAt DEnSIty RACkS
44
C_G
NR
_04
13
19632013 fiftycoolyears • RCGROUP SpA
COOLSide evo
coolside evo b3
coolside evo b3l
COOLSide evo
INVERTERE C
CHILLEDWATER
FRONTFLOWR410A
new
gENERAL cHARAcTERISTIcSCOOlSIDE EVO is a precision cooling system, in split-
system type, for application in modern IT infrastructure as
telephone exchange, data bank, internet hotel and server
rooms, all characterized by high thermal loads.
COOlSIDE EVO is able to cope the high density of
thermal load in a small space, up to 24.9 kW on 0.3 m2
of floor space.
The modularity of the system together with the adaptive
logic of microprocessor control make COOlSIDE
EVO the best solution for cooling racks and the latest
generation equipment.
For installation are not required underfloor plenum, ducts
or false-ceilings; the installation foresee the insertion of
COOlSIDE EVO within the rows of racks to cool.
This allows to contrast the localized heat sources (hot
spot) tailoring the installation to the actual situation of the
plant.
Another big advantage is the modularity and scalability of
the system, characteristics that allow for quick adjustment
and economic development of plant layout, according to
the changing needs of the infrastructure.
air conditioning systems for high heat density racks
THE SYSTEm:
COOlSIDE EVO DX (R410A)
Size B3 / B3L / B6 / B6L
Size DX 010 - Cooling capacity 4,5÷11,1 kW
Size DX 020 - Cooling capacity 10,0÷22,5 kW
Size DX 040 - Cooling capacity 20,0÷41,7 kW
Indoor direct expansion evaporating unit.
mCAI (R410A) Air cooled motocondensing unit
mCWI (R410A) Water cooled motocondensing unit
mCAI m10: Cooling capacity 10 kW
Motocondensing unit equipped with Twin Rotary
type compressor, connected to one indoor
evaporating unit
mCAI / mCWI T20: Cooling capacity 20 kW
Motocondensing unit equipped with Scroll type
compressor, connected to one or two indoor
evaporating unit
mCAI / mCWI T40: Cooling capacity 40 kW
Motocondensing unit equipped with Scroll type
compressor, connected to one, two or three indoor
evaporating unit
COOlSIDE EVO CW
Size B3 / B3L - Cooling capacity 24,3 kW
Size B6 / B6L - Cooling capacity 53,1 kW
Chilled water fed terminal unit/s, to be matched to
a liquid chiller.
Only coolingTwin Rotary compressor Scroll type compressor
Compressor electric motor driven by inverterR410A refrigerant charge
Chilled water feedingPlug-fan with brushless type EC electric motor
Frontal air deliveryIndoor installation
44 45
C_G
NR
_04
13
RCGROUP SpA • 19632013 fiftycoolyears
COOLSide evo
COOLSide evo
mCai t20/T40
mCai m10
mCwi t20/T40
mAIN cOmpONENTS cOOLSIDE EVO DX / cW - indoor unit• Horizontal air flow
• Plug fans EC type (electronically commutated)
• Washable air filter
• Electronic expansion valve (DX)
• Refrigerant change R410A (DX)
• Hydraulic and refrigeration connections from the
the bottom
• Condensate discharge system with water
presence alarm
• Microprocessor control
• Hinged electric box for an easier internal
access
• Power supply: 230/1/50
mAIN OpTIONAL AccESSORIES• Clogged filters alarm
• Air flow alarm
• Serial port
• Double power supply (network+UPS)
• Ultrasound humidifier
air conditioning systems for high heat density racks
mAIN cOmpONENTSmcAI / mcWI motocondensing unit• M10: Twin Rotary compressor with EC type brushless
motor controlled by inverter.
• T20 / T40: Scroll compressor with EC type brushless
motor controlled by inverter.
• Axial fans brushless type EC motor (MCAI)
• Microchannel type aluminium condensing coils
(MCAI)
• Refrigerant / Hydraulic connection on back side
• Microprocessor control
• Power supply: M10: 230/1/50
T20 / T40: 400/3/50+N
46
C_G
NR
_04
13
19632013 fiftycoolyears • RCGROUP SpA
COOLSide evoair conditioning systems for high heat density racks
The COOlSIDE EVO system is designed to serve two main “server room” architectures currently in use:
- cooling system for rows of racks (hot/cold aisle) with units size B3 / B6.
- direct cooling of the rack (closed loop) with units size B3L / B6L.
All COOlSIDE EVO units can be equipped on request with dual power supply system (network + UPS) to ensure continuity
of service even during periods of blackouts.
COOlSIDE EVO is available in direct expansion (DX) version, to be coupled to a remote air cooled (MCAI) or water cooled
(MCWI) motocondensing unit, or for supply with chilled water (CW) produced by a liquid chiller.
The direct expansion version is equipped with an inverter controlled hermetic twin-rotary or scroll compressors, which
reduces power consumption in real time adjusting to the real plant thermal load.
The maintenance of the machines is as simple as possible thanks to the completely removable panels and complete access
to the front.
AN EffICIENT ENERGY USE
One of the most important characteristics of COOLSIDE EVO units is their high energy
efficiency, both at design and at the various operating conditions experienced during
the year.
The motocondensing units are equipped with inverter driven
compressor allowing proportional control of the cooling capacity,
while the axial fans electric motors are brushless type with built-
in electronic commutation system (EC). Moreover the condensing
section is equipped with a “microchannel” type heat exchanger
coil totally made in aluminium.
The evaporating units are equipped with plug-fan directly
coupled to brushless type electric motor with built-in electronic
commutation system (EC).
46 47
C_G
NR
_04
13
RCGROUP SpA • 19632013 fiftycoolyears
COOLSide evo
0
20
40
60
80
(%) 100
0 20 40 60 80 100 (% RPM)
air conditioning systems for high heat density racks
INVERTER SYSTEm
The compressor driven by an inverter varies the load continuously and
the regulation of the refrigerant circuit can be easily adapted, without
oscillations and transients, the operating conditions
required.
The system is highly efficient since it is supplying the
energy necessary to satisfy the required thermal load
only; furthermore it is possible to supply thermal or
cooling energy even in case of overload conditions of
the system. The working range of COOLSIDE EVO,
in comparison to the nominal values of cooling and
thermal capacity output, varies on average from 35% to 120%.
MCAI motocondensing unit
Back side view with microchannel type condensing
coil and refrigerant connections.
Eng
aged
pow
er
Motor rotation speed
PlUG fAN WITH EC ElECTRIC mOTOR
The fans electric motors are the brushless type with built-
in electronic commutation system (EC) which yield high
energy savings during operation in reduced air flow.
These electric motors are ensuring high performances,
minimum energy consumption and total absence of
electromagnetic noise.
ADVANTAGES Of THE “mICROCHANNEl TECHNOlOGY”
The micro-channel condensing coils are the ideal choice for operation with refrigerant pressures up-to 45 bar and they
are optimise on the motocondensing MCAI series with R410A refrigerant charge.
The micro-channel condensing coils are in aluminium and they are perfectly suitable for the civil and industrial
applications cooling, while the protection function of the oxide layer allows an optimum resistance to corrosion also in
case of aggressive ambient conditions.
The optional version with special protective surface treatment - acrylic painting TK Pro -
allows to obtain a high resistance to salt spray while maintaining
the same conditions of heat exchange capacity.
The use of aluminium for the micro-channel condensers
manufacture is able to offer the possibility for very light machinery:
the coil weight is only 50% compared to traditional copper pipes
and aluminium fins of the same capacity.
. The reduced air resistance of the micro-channel coils allows to
drastically reduce the fans motors electric energy consumption.
At the same performances conditions, the micro-channels
condensers require up-to less than 75% refrigerant when
compared to the traditional heat exchangers.
48
C_G
NR
_04
13
19632013 fiftycoolyears • RCGROUP SpA
COOLSide evo
MONO SPLIT MONO SPLITMONO SPLIT
MCAI M10 MCAI T20 MCAI T40
MCAI T20 MCAI T40
MCAI T40 MCAI T40
DX 010 DX 020 DX 040
2 x DX 010 2 x DX 020
3 x DX 020 3 x DX 010
MULTI SPLIT MULTI SPLIT
MULTI SPLIT MULTI SPLIT
air conditioning systems for high heat density racks
pOSSIBLE cONFIgURATIONS
LIQUID CHILLER
48 49
C_G
NR
_04
13
RCGROUP SpA • 19632013 fiftycoolyears
COOLSide evo
mCAI m10 mCAI T20 mCAI T40 mCWI T20 mCWI T40 10,0 20,0 40,0 21,6 42,4 3,80 3,30 3,20 4,80 4,50 1 1 1 1 1 30 ÷ 100 30 ÷ 100 30 ÷ 100 30 ÷ 100 30 ÷ 100 108 200 280 180 195 71,8 73,4 71,8 50,0 50,0
new
new
new
air conditioning systems for high heat density racks
TEcHNIcAL DATA AND NOmINAL pERFORmANcES
cOOLSIDEEVO DX direct expansion
mODElSIZE
Cooling capacity (1) kW Air flow m3/hWeight kgNoise pressure (3) dB(A)
fans power input to be added to the room load.(1) Gross value - Referred to entering air at 35°C with 30% RH and outdoor air temperature at 35°C.(2) Gross value - Referred to entering air at 35°C with 30% RH and chilled water temperature 7/12°C.(3) Sound pressure 1m far in free field according to ISO3744 norm. POWER SUPPLY: MCAI M10: 230/1/50 MCAI T20 / T40: 400/3/50+N MCWI T20 / T40: 400/3/50+N COOLSIDE EVO: 230/1/50
mcAI air cooled
mODElmotocondensing unitCooling capacity (1) kW EER (1)Compressors n.Capacity control %Weight kgNoise pressure (3) dB(A)
cOOLSIDE cW terminal units for chilled water systems
mODElSIZE
Cooling capacity (2) kW Air flow m3/hWater flow n.Weight kgNoise pressure (3) dB(A)
010 020 040 B3 / B3l B3 / B3l B6 / B6l Nominal Reduced Medium Maximum Nominal Reduced Medium Maximum Nominal Reduced Medium Maximum 10,0 4,5 8,1 11,1 20,0 10,0 15,0 22,5 37,5 20,0 28,0 41,7 2800 1300 2100 2900 4700 2200 3500 4850 9400 4300 7000 9700 B3 = 110 / B3L = 122 B3 = 120 / B3L = 132 B6 = 225 / B6L = 241 67,6 51,0 61,2 68,3 69,8 53,3 63,4 70,4 72,3 55,4 65,9 72,9
020 040 B3 / B3l B6 / B6l Nominal Reduced Maximum Nominal Reduced Maximum 24,3 19,6 24,9 51,9 41,7 53,1 4700 3500 4850 9400 7000 9700 4,18 3,37 4,27 8,90 7,15 9,11 B3 = 135 / B3L = 151 B6 = 245 / B6L = 261 69,8 63,4 70,4 72,3 65,9 72,9
mcWI water cooled
50
C_G
NR
_04
13
19632013 fiftycoolyears • RCGROUP SpA
COOLSide evo
ab
c
ab
c
c
a b
c
a b
c
a b
mcAI m10
mcAI T20/40
mcWI T20/40
DImENSIONS (mm)
air conditioning systems for high heat density racks
Size a b c
MCAI 10 1.050 450 900
MCAI 20 1.050 450 1.395
MCAI 40 1.550 450 1.400
Size a b c
MCWI 20 525 510 1.695
MCWI 40 525 510 1.695
Size a b c
COOLSIDE EVO 010/020 B3 300 1.000 2.000
COOLSIDE EVO 040 B6 600 1.000 2.000
Size a b c
COOLSIDE EVO 010/020 B3L 300 1.200 2.000
COOLSIDE EVO 040 B6L 600 1.200 2.000