43 normy iso - nove potvrdene a zruene april 2011
TRANSCRIPT
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
Standards published
New International Standards published between 01 April and 30 April 2011
* Available in English only
** French version of standard previously published in English only
Price group
TC 2 Fasteners
ISO 4017:2011
Hexagon head screws — Product grades A and B E
ISO 4018:2011
Hexagon head screws — Product grade C E
ISO 7048:2011
Cross-recessed cheese head screws C
ISO 8676:2011
Hexagon head screws with metric fine pitch thread — Product grades A and B F
ISO 2702:2011
Heat-treated steel tapping screws — Mechanical properties C
TC 6 Paper, board and pulps
ISO 10376:2011
Pulps — Determination of mass fraction of fines D
TC 8 Ships and marine technology
ISO 30006:2010
Ship recycling management systems — Diagrams to show the location of hazardous materials onboard ships
E
ISO 30007:2010
Ships and marine technology — Measures to prevent asbestos emission and exposure during ship recycling
H
ISO 23269-3:2011 * Ships and marine technology — Breathing apparatus for ships — Part 3: Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes
B
TC 17 Steel
ISO 9444-2:2009 * Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
D
ISO 9328-1:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
H
ISO 9328-2:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
N
ISO 9328-3:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
J
ISO 9328-4:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
G
ISO 9328-5:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
H
ISO 9328-6:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
G
ISO 9328-7:2011 * Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
T
ISO 20805:2011 * Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
E
TC 20 Aircraft and space vehicles
ISO 11893:2011 * Space systems — Programme management — Project organization D
ISO 27026:2011 * Space systems — Programme management — Breakdown of project management structures F
TC 21 Equipment for fire protection and fire fighting
ISO 16852:2008
Flame arresters — Performance requirements, test methods and limits for use T
TC 22 Road vehicles
ISO 13043:2011 * Road vehicles — Refrigerant systems used in mobile air conditioning systems (MAC) — Safety requirements
L
ISO 15031-5:2011 * Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
XB
ISO 7401:2011 * Road vehicles — Lateral transient response test methods — Open-loop test methods L
ISO 11838:1997/Amd 1:2011
* Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1 XZ
ISO 14722:1998/Amd 1:2011
* Moped and moped-rider kinematics — Vocabulary — Amendment 1 XZ
TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-5:2011 * Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management
N
ISO 11783-13:2011
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 13: File server
T
TC 28 Petroleum products and lubricants
ISO 20884:2011
Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry
E
TC 29 Small tools
ISO 3860:2011
Bore cutters with key drive — Form milling cutters with constant profile B
ISO 1174-1:2011
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools
B
ISO 3315:2011
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
D
TC 31 Tyres, rims and valves
ISO 4250-3:2011
Earth-mover tyres and rims — Part 3: Rims G
TC 34 Food products
ISO 16050:2003
Foodstuffs — Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products — High-performance liquid chromatographic method
F
ISO 3720:2011 * Black tea — Definition and basic requirements B
ISO 11287:2011 * Green tea — Definition and basic requirements B
TC 35 Paints and varnishes
ISO 29601:2011
Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film
D
TC 37 Terminology and other language and content resources
ISO 10241-1:2011
Terminological entries in standards — Part 1: General requirements and examples of presentation
U
TC 44 Welding and allied processes
ISO 12153:2011
Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys — Classification
E
ISO 18275:2011
Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
N
TC 46 Information and documentation
ISO 16175-2:2011 * Information and documentation — Principles and functional requirements for records in electronic office environments — Part 2: Guidelines and functional requirements for digital records management systems
V
TC 58 Gas cylinders
ISO 11363-1:2010/Cor 1:2011
Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications — Technical Corrigendum 1
free
TC 60 Gears
ISO/TR 22849:2011
* Design recommendations for bevel gears R
TC 61 Plastics
ISO 10927:2011
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
G
ISO 11357-3:2011 * Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
C
ISO 294-5:2011
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
D
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO/TS 12747:2011
* Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension
L
TC 89 Wood-based panels
ISO 10033-1:2011 * Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods J
ISO 10033-2:2011 * Laminated Veneer Lumber (LVL) — Bonding quality — Part 2: Requirements B
TC 94 Personal safety -- Protective clothing and equipment
ISO 27065:2011 * Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides
J
TC 106 Dentistry
ISO 21671:2006/Amd 1:2011
Dentistry — Rotary polishers — Amendment 1
XZ
TC 108 Mechanical vibration, shock and condition monitoring
ISO 18437-5:2011 * Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
G
ISO 17359:2011 * Condition monitoring and diagnostics of machines — General guidelines M
ISO 29821-1:2011 * Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines J
TC 115 Pumps
ISO 9905:1994/Amd 1:2011
Technical specifications for centrifugal pumps — Class I — Amendment 1
XZ
ISO 9908:1993/Amd 1:2011
Technical specifications for centrifugal pumps — Class III — Amendment 1
XZ
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-10:2011
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers
N
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-12:2011
Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
W
TC 123 Plain bearings
ISO 4384-2:2011 * Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials B
TC 131 Fluid power systems
ISO 16589-1:2011 * Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
G
ISO 16589-3:2011 * Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation
E
ISO 16589-4:2011 * Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
H
ISO 16589-5:2011 * Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections
G
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 11296-3:2009/Cor 1:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
free
ISO 21003-2:2008/Amd 1:2011
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
XZ
TC 145 Graphical symbols
ISO 3864-1:2011 * Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings
J
TC 146 Air quality
ISO 25139:2011 * Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography
J
TC 150 Implants for surgery
ISO 12891-1:2011 * Implants for surgery — Retrieval and analysis of surgical implants — Part 1: Retrieval and handling
L
TC 164 Mechanical testing of metals
ISO 1352:2011 * Metallic materials — Torque-controlled fatigue testing L
TC 172 Optics and photonics
ISO 14997:2011
Optics and photonics — Test methods for surface imperfections of optical elements G
ISO 8038:2011 * Microscopes — Screw threads for objectives and related nosepieces C
ISO 8255-1:2011 * Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties
C
TC 184 Automation systems and integration
ISO 10303-203:2011
* Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies
XJ
ISO 10303-210:2011
* Industrial automation systems and integration — Product data representation and exchange — Part 210: Application protocol: Electronic assembly, interconnect, and packaging design
XJ
TC 190 Soil quality
ISO 23753-1:2005
Soil quality — Determination of dehydrogenase activity in soils — Part 1: Method using triphenyltetrazolium chloride (TTC)
C
ISO 23753-2:2005
Soil quality — Determination of dehydrogenase activity in soils — Part 2: Method using iodotetrazolium chloride (INT)
C
TC 198 Sterilization of health care products
ISO 13408-2:2003
Aseptic processing of health care products — Part 2: Filtration F
ISO 13408-3:2006
Aseptic processing of health care products — Part 3: Lyophilization F
ISO 13408-4:2005
Aseptic processing of health care products — Part 4: Clean-in-place technologies G
ISO 13408-6:2005
Aseptic processing of health care products — Part 6: Isolator systems J
ISO 15883-6:2011
Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
D
TC 204 Intelligent transport systems
ISO/TS 13140-1:2011
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 — Part 1: Test suite structure and test purposes
S
ISO/TS 13143-1:2011
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 — Part 1: Test suite structure and test purposes
V
ISO/TS 17575-3:2011
* Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data
X
ISO/TS 17575-4:2011
* Electronic fee collection — Application interface definition for autonomous systems — Part 4: Roaming
M
TC 207 Environmental management
ISO 14066:2011
Greenhouse gases — Competence requirements for greenhouse gas validation teams and verification teams
M
TC 213 Dimensional and geometrical product specifications and verification
ISO 14253-2:2011
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
W
ISO 14253-3:2011
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
F
TC 215 Health informatics
ISO 18308:2011
Health informatics — Requirements for an electronic health record architecture M
TMB Technical Management Board
ISO/IEC 80079-34:2011
* Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture V
JTC 1 Information technology
ISO/IEC 20000-1:2011
* Information technology — Service management — Part 1: Service management system requirements
M
ISO/IEC 14443-3:2011
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision
U
ISO/IEC 12862:2011
* Information technology — 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
XD
ISO/IEC 29103:2011
* Information technology — Office equipment — Colour photo test pages for measurement of ink cartridge yield for colour photo printing
C
ISO/IEC 13818-1:2007/Amd 3:2009/Cor 1:2011
* Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Amendment 3: Transport of scalable video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1 — Technical Corrigendum 1
free
ISO/IEC 13818-1:2007/Cor 3:2011
* Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Technical Corrigendum 3: Corrections concerning VBV buffer size, semantics of splice_type and removal rate from transport buffer for ITU-T H.264 ISO/IEC 14496-10 advanced video coding
free
ISO/IEC 14496-5:2001/Amd 28:2011
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 28: Reference software for LASeR adaptation tools
XZ
ISO/IEC 23005-6:2011
* Information technology — Media context and control — Part 6: Common types and tools V
ISO/IEC 19762-3:2008
Information technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary — Part 3: Radio frequency identification (RFID)
J
ISO/IEC 13249- * Information technology — Database languages — SQL multimedia and application packages —
3:2011 Part 3: Spatial XL
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 885:2000 (reconfirmed)
ISO 6157-2:1995 (reconfirmed)
TC 6 Paper, board and pulps
ISO 17812:2007
TC 17 Steel
ISO 7788:1985 (reconfirmed)
ISO 6305-3:1983 (reconfirmed)
ISO 6305-4:1985 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 2315:1980 (reconfirmed)
ISO 8056-1:1985 (reconfirmed)
TC 22 Road vehicles
ISO 13837:2008
TC 28 Petroleum products and lubricants
ISO 6743-10:1989 (reconfirmed)
ISO 6743-11:1990 (reconfirmed)
ISO 6743-12:1989 (reconfirmed)
ISO 6743-14:1994 (reconfirmed)
ISO 6743-15:2007
ISO 8216-2:1986 (reconfirmed)
ISO 24254:2007
TC 29 Small tools
ISO 297:1988 (reconfirmed)
ISO 2336-2:2006
ISO 4875-1:2006
ISO 4875-2:2006
ISO 7388-1:2007
ISO 7388-2:2007
ISO 11054:2006
ISO 13399-1:2006
TC 34 Food products
ISO 6092:1980 (reconfirmed)
ISO 7586:1985 (reconfirmed)
ISO 9233-1:2007
ISO 9233-2:2007
ISO 5510:1984 (reconfirmed)
ISO 6490-1:1985 (reconfirmed)
ISO 6493:2000 (reconfirmed)
ISO 6866:1985 (reconfirmed)
ISO 6867:2000 (reconfirmed)
ISO 6869:2000 (reconfirmed)
ISO 7485:2000 (reconfirmed)
ISO 14181:2000 (reconfirmed)
ISO 14565:2000 (reconfirmed)
TC 35 Paints and varnishes
ISO 3251:2008
ISO 3681:1996 (reconfirmed)
ISO 6744-1:1999 (reconfirmed)
ISO 6744-2:1999 (reconfirmed)
ISO 6744-3:1999 (reconfirmed)
ISO 6744-4:1999 (reconfirmed)
ISO 11668:1997 (reconfirmed)
ISO 13885-1:2008
ISO 14446:1999 (reconfirmed)
ISO 15234:1999 (reconfirmed)
ISO 15715:2003
ISO 15880:2000 (reconfirmed)
ISO 16805:2003
TC 43 Acoustics
ISO 1680:1999 (reconfirmed)
ISO 3743-2:1994 (reconfirmed)
ISO 4869-3:2007
ISO 7196:1995 (reconfirmed)
ISO 8297:1994 (reconfirmed)
ISO 11203:1995
ISO 11205:2003
ISO 13475-1:1999 (reconfirmed)
TC 44 Welding and allied processes
ISO 9692-3:2000 (reconfirmed)
TC 51 Pallets for unit load method of materials handling
ISO 12777-1:1994 (reconfirmed)
TC 52 Light gauge metal containers
ISO 10193:2000 (reconfirmed)
ISO 90-3:2000 (reconfirmed)
ISO 10154:1991 (reconfirmed)
TC 54 Essential oils
ISO 17412:2007
ISO 19332:2007
TC 61 Plastics
ISO 4608:1998
ISO 8873-1:2006
TC 70 Internal combustion engines
ISO 4548-12:2000 (reconfirmed)
TC 72 Textile machinery and accessories
ISO 26243:2007
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 11933-3:1998 (reconfirmed)
TC 92 Fire safety
ISO/TR 13387-1:1999 (reconfirmed)
ISO/TR 13387-2:1999 (reconfirmed)
ISO/TR 13387-3:1999 (reconfirmed)
ISO/TR 13387-4:1999 (reconfirmed)
ISO/TR 13387-5:1999 (reconfirmed)
ISO/TR 13387-6:1999 (reconfirmed)
ISO/TR 13387-7:1999 (reconfirmed)
ISO/TR 13387-8:1999 (reconfirmed)
TC 94 Personal safety -- Protective clothing and equipment
ISO 12127-2:2007
TC 106 Dentistry
ISO 1564:1995 (reconfirmed)
ISO 4823:2000 (reconfirmed)
ISO 7491:2000 (reconfirmed)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 2017-2:2007
TC 121 Anaesthetic and respiratory equipment
ISO 7396-2:2007
TC 123 Plain bearings
ISO 3547-5:2007
ISO 3547-6:2007
ISO 3547-7:2007
TC 147 Water quality
ISO 9696:2007
ISO 10703:2007
ISO/TR 11905-2:1997 (reconfirmed)
ISO/TS 20612:2007
ISO 11348-1:2007
ISO 11348-2:2007
ISO 11348-3:2007
ISO 15088:2007
ISO 23893-1:2007
ISO/TS 23893-2:2007
TC 211 Geographic information/Geomatics
ISO 19105:2000 (reconfirmed)
ISO 19132:2007
TC 217 Cosmetics
ISO 22716:2007
JTC 1 Information technology
ISO/IEC 15051:2003
ISO/IEC 14598-2:2000
ISO/IEC 14496-11:2005
ISO/IEC 15444-9:2005
Standards withdrawn
Period from 01 April to 30 April 2011
TC 37 Terminology and other language and content resources
ISO 10241:1992 (replaced by ISO 10241-1:2011)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 13380:2002 (replaced by ISO 17359:2011)
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 8662-2:1992 (replaced by ISO 28927-10:2011)
ISO 8662-2:1992/Amd 1:1999
(replaced by ISO 28927-10:2011)
ISO 8662-3:1992 (replaced by ISO 28927-10:2011)
ISO 8662-3:1992/Amd 1:1999
(replaced by ISO 28927-10:2011)
ISO 8662-5:1992 (replaced by ISO 28927-10:2011)
ISO 8662-5:1992/Amd 1:1999
(replaced by ISO 28927-10:2011)
TC 172 Optics and photonics
ISO 8038-1:1997 (replaced by ISO 8038:2011)
ISO 8038-2:2001 (replaced by ISO 8038:2011)
TC 213 Dimensional and geometrical product specifications and verification
ISO/TS 14253-2:1999 (replaced by ISO 14253-2:2011)
ISO/TS 14253-3:2002 (replaced by ISO 14253-3:2011)
TC 215 Health informatics
ISO/TS 18308:2004 (replaced by ISO 18308:2011)