435 zhs compact excavator specifications - …locationblais.com/images/products/435.pdf · bobcat...
TRANSCRIPT
435 ZHS COMPACT EXCAVATOR SPECIFICATIONS
STANDARD & LONG ARM SPECIFICATIONS Standard Arm Long ArmA. Maximum Blade Height ...................................... 15.7" (398 mm) 16.0" (405 mm)B. Maximum Blade Depth ....................................... 21.5" (546 mm) 21.0" (534 mm)C. Maximum Height of Working Equipment with Arm Retracted ............................................. 156.3" (3970 mm) 156.3" (3970 mm)D. Maximum Working Equipment Radius with Boom @ Maximum Height .......................... 95.6" (2365 mm) 100.5" (2553 mm)E. Maximum Reach at Ground Level ...................... 220.9" (5611 mm) 234.7" (5961 mm)F. Maximum Radius of Working Equipment ........... 226.7" (5219 mm) 240.0" (6096 mm)G. Maximum Bucket Tooth Height ........................... 210.5" (5346 mm) 220.0" (5588 mm)H. Maximum Dump Height ....................................... 144.0" (3658 mm) 153.1" (3889 mm)I. Maximum Depth of Vertical Wall
which can be Excavated ..................................... 101.1" (2568 mm) 113.5" (2883 mm)J. Maximum Dig Depth ........................................... 134.7" (3420 mm) 148.5" (3772 mm)Bucket Pivot Angle .................................................. 183° 183°
WORKING RANGE
A
B
C
D
E
F
G
JI
H
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
C
B
A
C
B
AD
E
A
B
C
D
EF
G
H
A. Machine centerline to working equipment centerline, left hand rotation ............ 23.0" (585 mm)B. Machine centerline to working equipment centerline, right hand rotation .......... 31.4" (798 mm)C. Minimum turning radius .................................................................................. 73.9" (1877 mm)C. Minimum turning radius - Long Arm ................................................................ 75.5" (1918 mm)D. Swing clearance, rear of upperstructure (zero tail swing) ................................. 37.6" (955 mm)E. Working width maximum right hand rotation ................................................... 81.9" (2080 mm)
A. Upperstructure to Groundline ...................................... 24.7" (627 mm)B. Groundline to top of engine cover ............................. 64.7" (1644 mm)C. Minimum radius in travel position ........................... 157.6" (4003 mm)
Minimum radius in travel position-Long Arm ............ 158.4" (4023 mm)D. Overall length in transport position .......................... 206.2" (5238 mm)
Overall length in transport position-Long Arm .......... 207.0" (5258 mm)E. Blade height ............................................................... 17.4" (442 mm)F. Length of track on ground ......................................... 76.1" (1932 mm)G. Machine centerline to blade...................................... 72.5" (1843 mm)H. Overall length of track assembly ............................... 98.3" (2496 mm)
A. Cab Height ............................................................. 100.1" (2541 mm)B. Track width ............................................................... 15.7" (400 mm)C. Blade width ............................................................. 76.0" (1930 mm)Track Lug Height .................................................................... 1.2" (30 mm)Ground Clearance ................................................................ 9.7” (248 mm)
DIMENSIONS
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
Pump Type .......................................................... Piston with pressure competaing, load sensing andtorque limiter controls
Pump Capacity ................................................... 29.72 GPM (112,5 L/min)Control Valve ....................................................... 7 Spool, closed centerSystem Relief Pressure ...................................... 3625 PSI (250 Bar)Auxiliary Relief .................................................... 3045 PSI (210 Bar)Maximum Auxiliary Flow ..................................... 19.81 GPM (75 L/min)Drive Motors ....................................................... (2) Axial Piston MotorsSwing Motor ....................................................... Radial piston motor with brakeOil Cooler ............................................................ Standard EquipmentSlew Speed ......................................................... 9.3 RPMBoom Swing (Left) ............................................... 90°Boom Swing (Right) ............................................ 50°
Hydraulic Function Times
Bucket ............................................................... Curl 2.2 Seconds Dump 1.6 SecondsArm (cushion out) .............................................. Retract 3.8 Seconds Extend 2.6 SecondsBoom (cushion up) ............................................ Raise 3.8 Seconds Lower 5.0 SecondsBoom Swing (cushion Left/Right) ....................... Left 6.6 Seconds Right 5.9 SecondsBlade ................................................................. Raise 2.4 Seconds Lower 2.4 Seconds
HYDRAULIC SYSTEM
Operating Weight (includes standard equipment and 24" bucket) (SAE J732)Standard Arm Long Arm
With rubber tracks ..................................... 10,388 lbs. (4711 kg) 10,635 lbs. (4823 kg)With Cab, Heat & Air Conditioning ............. 10,743 lbs. (4873 kg) 10,990 lbs. (4984 kg)
Travel SpeedLow ............................................................. 1.7 mph (2,7 km/hr)High ............................................................. 2.7 mph (4,3 km/hr)
Digging ForceBucket ......................................................... 7892 lbs. (35105 N)Breakout Force-Standard Arm .................... 5262 lbs. (23406 N)Breakout Force-Long Arm ........................... 4525 lbs. (20128 N)
MACHINE PERFORMANCE
Bore Diameter Rod Diameter Stroke Diameter
Boom (cushion up) 3.75 in. (95,25 mm) 2.00 in. (50,8 mm) 26.72 in. (678,6 mm)Arm (cushion out) .................................. 3.25 in. (82,6 mm) 2.00 in. (50,8 mm) 26.00 in. (660,4 mm)Bucket ................................................... 3.00 in. (76,2 mm) 1.75 in. (44,5 mm) 20.63 in. (524 mm)Boom Swing (cushion left and right) ...... 3.25 in. (82,5 mm) 2.00 in. (50,8 mm) 23.51 in. (597,2 mm)Blade (2) ................................................ 3.25 in. (82,5 mm) 1.75 in. (44,5 mm) 6.10 in. (154,9 mm)
HYDRAULIC CYLINDERS
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
Fuel Tank ............................... 17.8 gal. (67,4 L)Cooling System .......................... 4.5 gal. (17 L)Engine oil & filter ........................ 7.5 qts. (7,1 L)Hydraulic System Reservoir ......9.7 gal. (29,9 L)
CAPACITIES
Undercarriage...........................Crawler-Type Tractor DesignSealed Track Rollers with ReinforcedBox-Section Track Roller Frame
Track Adjusters ........................Grease Type with ShockAbsorbing Recoil Springs
Track Type (Rubber) ................ 1/2 Pitch RubberTrack Type (Steel opt.) .............Double Grouser ShoeTrack Width ..............................15.7" (400 mm)Track Rollers ............................ 5 each sideTop Roller .................................1 each sideStandard Arm:Ground Pressure-Rubber .......... 4.00 PSI (27,6 kPa)Ground Pressure-Steel ............. 4.03 PSI (27,8 kPa)Long Arm:Ground Pressure-Rubber .......... 4.10 PSI (28,3 kPa)Ground Pressure-Steel ............. 4.13 PSI (28,5 kPa)
UNDERCARRIAGE
Drive Pumps ..............................Dedicated variable displacements piston pumps for left and right driveDrive Motors ..............................Each track is driven by a hydrostatic axial piston motorType of Reduction ......................Two stage planetary gear reductionMax. Drawbar Pull ......................10463 lbf. (46540 N)Maximum Gradeability ...............30°
DRIVE SYSTEM
Make/Model ................................... Kubota V2403 (Turbo) (interim Tier 4)Fuel/Cooling .................................. Diesel/LiquidHorsepower (SAE Gross) ............... 48.8 HP (36,4 kW)Horsepower (SAE Net) ................... 47.5 HP (35,4 kW)Maximum Governed RPM .............. 2200 RPMTorque (SAE Gross) ...................... 125.1 ft–lbs. (169,6 Nm)Number of Cylinders ...................... 4Displacement ................................. 122 cu. in. (1999 cu. cm)Bore/Stroke.................................... 3.27 x 3.64 in. (83 x 92,4 mm)Lubrication ..................................... ForcedFuel Filter ...................................... Two-StageAir Cleaner .................................... Dry replaceable cartridge with safety element and
restriction indicatorAlternator ....................................... 12 volt; 90 amps, open frame with internal regulatorBattery ........................................... 12 volt; 600 cold cranking amps @ 0°F (-18°C);
115 minute reserve capacityStarter ............................................ 12 volt; Gear Reduction Type; 2.7 HP (2 kW)
ENGINE/ELECTRICAL
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
Vehicle Steering ............. Independent control of tracks, via pilot-assisted hand levers or foot pedalsHigh/Low Range ............ Activated by thumb switch on blade leverExcavator Functions ...... Two hydraulic joysticks control boom, arm, bucket and cab slew. Foot pedal controls
boom swing. Switches on right hand joystick control Auxiliary Hydraulic FunctionsBlade Functions ............. The blade is controlled by a separate lever. Blade float is activated by blade lever.Service Brake (Travel) ... Spring applied multi-disc brakeParking Brake (Travel) ... Spring applied multi-disc brakeService Brake (Slew) ..... Hydraulic lock on motorHolding Brake (Slew) ..... Spring applied multi-disc brake
CONTROLS
AM/FM StereoKeyless StartLong ArmSteel TracksTOPS/ROPS Cab with Heater and Air ConditioningTravel Motion Alarm
OPTIONS/ACCESSORIES
INSTRUMENTATION
Right of Operator SeatAir Filter Restriction Indicator
Charging System IndicatorEngine Oil Pressure Indicator
Engine Temperature GaugeFuel GaugeHourmeter
Hourmeter - ResettableHydraulic System Indicator
Pre-Heat IndicatorTachometer
76" Dozer Blade15.7" Half Pitch Rubber TrackAuxiliary Hydraulics with Quick CouplersBlade FloatControl Console LocksControl Pattern Selector Valve (ISO/STD)CupholderEngine/Hydraulic Monitor with ShutdownFastTrack® Drive SystemFingertip Auxiliary Hydraulic ControlHornHydraulic Joystick ControlsRetractable Seat BeltSpark Arrestor MufflerSuspension Seat with High Back*TOPS/ROPS CanopyTwo-Speed TravelVandalism ProtectionWorking LightsX-Change(TM) (Attachment Mounting System)Warranty: 12 Months, Unlimited Hours
*Roll Over Protective Structure (ROPS) -
Meets Requirements of SAE-J1040C
*Tip Over Protective Structure (TOPS) -
Meets Requirements of ISO/DIS 12117
STANDARD FEATURES
One Year Unlimited Hours ............. Standard24 Month, 2000 Hour Limit ............ Optional36 Month, 3000 Hour Limit ............ Optional60 Month, 5000 Hour Limit
(Municipalities Only) ................ Optional
WARRANTY
AugerGrading Blade (55")Grading Bucket (39" & 52")GrappleHydra-TiltHydraulic BreakerHydraulic Clamp
ATTACHMENTS
Packer WheelPlate CompactorPower TiltRipperTrenching BucketsTrencher
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
LIFT CHARTS
Bobcat 435 ZHS Compact Excavator Specifications November 11, 2008
Bobcat Excavator Operator Training Course4-hour course provides video, classroom and hands-on training
Bobcat Excavator Service Safety Training Course2-hour course provides video, classroom and hands-on training
TRAINING RESOURCES
Seat Belt (Std.) .......................................... Should always be worn when operating the excavatorGrab Handles (Std.) ................................... Should always be used when entering/exiting excavator.Front Working Lights (Std.) ........................ Use for indoor and low light operation.Control Lockout (Std.) ............................... Operator console shall lock out work group and travel functions when in
the upright position.House Swing Lock (Std.) .......................... An automatic disc brake shall be provided to lock upper structure to the
undercarriage for transporting.
Operator’s Handbook ................................ Weather resistant operator handbook written in English will beattached to inside of cab, providing operational instructions andwarnings by decals with pictorials and international symbols plussome messages in four basic languages: English, French, Germanand Spanish.
SAFETY
Access is available to the following through the rear tailgate orside access hood:
Air cleanerAlternatorCompressor (if excavator is equipped with Air Conditioning)Cooling system (engine coolant and hydraulic oil coolers) for cleaningEngine oil and fuel filtersEngine oil levelHydraulic FilterHydraulic valve bankStarterSight gauge for hydraulic level
Tailgate and access cover have locks for vandal proofingEasy access to all grease pointsCentral grease point for slew bearing, slew pinion and swing cylinder base
SERVICEABILITY