4.5″ downlight – roundfeatures innovative trimlock reflector retention system ensures trim...

5
FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm from 1800K to 3000K CCT, minimum 95 CRI 4 inch aperture is unobtrusive in small scale spaces Die cast trim choices include flush, regressed or angled lens Contemporary design provides glare-free illumination for a soft ceiling appearance Fully room-side accessible SPECIFICATIONS HOUSING – Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms adjust for ceiling thickness from 1/2″ - 1-7/16″ (see options for additional ceiling thicknesses). TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane. OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard. LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens. ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. LISTINGS – cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation. Suitable for wet location under covered ceiling when specified with WET/CC or TD options. IC-rated for direct contact with insulation when specified with I Mounting Type. City of Chicago Environmental Air approved when specified with CP option. Complies with ASTM-E283 when specified with ATH option. RoHS compliant. WARRANTY – 5-year limited warranty, see hew.com/warranty. NOTES 1 Lumen output based on full light output, O trim type, W distribution and CS finish, 3500K/95CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA. 2 9″ aperture, specify degress of slope in 5º increments, 05º-30º. See page 4 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH or TC options. N Mounting Type only. Not available with WET/CC. 3 Not available with EM batteries. 4 N and R Mounting Types only. 5 N and R Mounting Types only. 6 Not available with WET/CC, ATH or IP options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS. 7 I Mounting Type required. 8 May be required for 347V, see product builder at hew.com/product-builder 9 Trim ships separately. 10 Beam angle based on CS or WH reflector finish. 11 Available with WW Distribution only. 12 W Distribution, OF Flange Type, WH Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard. 13 O and A Trim Types only. 14 For use with mud-in plaster construction only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options. 15 R Trim Type only. Not available with MWT. 16 Not available with WH Reflector Finish, L or S Trim Types. 17 L and R Trim Types only. 18 Not available with O trim type. W distribution only. 19 Not available with O trim type. W distribution only. 20 O Trim Type only. WET/CC standard. Not available with S Trim Type. 21 WH and BL Reflector Finishes only. 22 Mounting hardware required (N and I only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS. 23 Additional mounting hardware options available. SEE PAGE 5 FOR MOUNTING HARDWARE DETAILS. 24 L15 lumen package max. 25 Also used in new construction sheetrock ceilings. 26 N and I Mounting Types only. 27 N Mounting Type only. 28 N Mounting Type only. ORDERING EXAMPLE: 4DR - TL - L24/9DW - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT. HOUSING SERIES LUMENS [1] COLOR OPTIONS CONTROL VOLTAGE 4DR - TL TrimLock L8 800lm L15 1,500lm L24 2,400lm 9DW Dim to warm (95 CRI, 1800K 3000K) SCA_ _ Sloped ceiling adapter [2] ATH Airtight construction F Fuse DIM Dimming driver, 0-10V LUT Lutron Ecosystem enabled UNV 120-277V 347 347V [3] EM/7W 7-watt emergency battery [4] EM/10W 10-watt emergency battery [5] EM/10W/RTS 10-watt emergency battery with regressed test switch [6] CP Chicago plenum (CCEA) [7] SDT Stepdown transformer [8] TC Adjustable mounting arms for 1-1/2″ – 2-1/4″ thick ceilings TRIM [9] TRIM TYPE DISTRIBUTION [10] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONS O Open reflector L Flush lens R Regressed lens A Angled lens [11] S Non-conductive flush lens for shower applications [12] W Wide 65° Open 50° Flush 50° Regressed M Medium 45° Open 35° Flush 30° Regressed N Narrow 10° Open 25° Flush 25° Regressed WW Wall wash [13] OF 1/2″ standard flange SF 1/4″ mud-in flange [14] Open trim types CS Clear semi-specular anodize SG Satin-glow anodize GD Gold anodize CG Champagne gold anodize PW Pewter anodize SPC Clear specular anodize RG Rose gold anodize WH White texture powder coat BL Black texture powder coat Lens trim types CS Clear semi-specular powder coat WH White texture powder coat BL Black texture powder coat MB Black texture splay with white flange [15] MWT Textured white trim flange [16] IP IP65 rated trim [17] AD Diffuse acrylic lens [18] PD Diffuse 1/8″ polycarbonate lens [19] TD Diffuse polycarbonate lens media at top of open reflector [20] WET/CC Wet location, covered ceiling listed AM Anti-microbial [21] MOUNTING MOUNTING TYPE [22] MOUNTING HARDWARE [23] N Open pan for new construction I IC-rated enclosure for new construction [24] R Remodel kit [25] F1 Integral 2-position fixed pan bracket, universal bar hanger included [26] BA1 Adjustable butterfly pan bracket, bar hanger not included [27] CA1 Adjustable caterpillar pan bracket, universal bar hanger included [28] NEW CONSTRUCTION AND REMODEL CATALOG #: ������������������������������������������������ TYPE: ������������������������������������������������������ PROJECT: ��������������������������������������������������� ø4-1/2″ L8 - L15: 5-3/4L24: 6-1/2″ 1/2″ min 1-7/16″ max 15H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice. Downlights Page 1 of 5 HEW.70712.LA REV.02/20/20 4DR 4.5″ Downlight – Round

Upload: others

Post on 16-Mar-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 4.5″ Downlight – RoundFEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane (95 CRI,Dim to warm from 1800K to 3000K CCT, minimum

FEATURES

■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane

■ Dim to warm from 1800K to 3000K CCT, minimum 95 CRI

■ 4 inch aperture is unobtrusive in small scale spaces

■ Die cast trim choices include flush, regressed or angled lens

■ Contemporary design provides glare-free illumination for a soft ceiling appearance

■ Fully room-side accessible

SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim

housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms adjust for ceiling thickness from 1/2″ - 1-7/16″ (see options for additional ceiling thicknesses).

■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane.

■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.

■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens.

■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.

■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware.

■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified

to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.

■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options.

■ IC-rated for direct contact with insulation when specified with I Mounting Type.

■ City of Chicago Environmental Air approved when specified with CP option.

■ Complies with ASTM-E283 when specified with ATH option.

■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see

hew.com/warranty.

NOTES1 Lumen output based on full light output,

O trim type, W distribution and CS finish, 3500K/95CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA.

2 9″ aperture, specify degress of slope in 5º increments, 05º-30º. See page 4 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH or TC options. N Mounting Type only. Not available with WET/CC.

3 Not available with EM batteries.4 N and R Mounting Types only.5 N and R Mounting Types only.6 Not available with WET/CC, ATH or IP

options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS.

7 I Mounting Type required.8 May be required for 347V, see product

builder at hew.com/product-builder

9 Trim ships separately.1 0 Beam angle based on CS or WH reflector

finish.1 1 Available with WW Distribution only.1 2 W Distribution, OF Flange Type, WH

Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard.

1 3 O and A Trim Types only.1 4 For use with mud-in plaster construction

only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options.

1 5 R Trim Type only. Not available with MWT.1 6 Not available with WH Reflector Finish, L

or S Trim Types.1 7 L and R Trim Types only.1 8 Not available with O trim type. W

distribution only.

1 9 Not available with O trim type. W distribution only.

2 0 O Trim Type only. WET/CC standard. Not available with S Trim Type.

2 1 WH and BL Reflector Finishes only.2 2 Mounting hardware required (N and I

only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.

2 3 Additional mounting hardware options available. SEE PAGE 5 FOR MOUNTING HARDWARE DETAILS.

2 4 L15 lumen package max.2 5 Also used in new construction sheetrock

ceilings.2 6 N and I Mounting Types only.2 7 N Mounting Type only.2 8 N Mounting Type only.

ORDERING EXAMPLE: 4DR - TL - L24/9DW - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.

HOUSING SERIES LUMENS [ 1 ] COLOR OPTIONS CONTROL VOLTAGE4DR - TLTrimLock

L8 800lmL15 1,500lmL24 2,400lm

9DW Dim to warm (95 CRI, 1800K – 3000K)

SCA_ _ Sloped ceiling adapter [ 2 ]

ATH Airtight construction F Fuse

DIM Dimming driver, 0-10V

LUT Lutron Ecosystem enabled

UNV 120-277V347 347V [ 3 ]

EM/7W 7-watt emergency battery [4 ]

EM/10W 10-watt emergency battery [ 5 ]

EM/10W/RTS 10-watt emergency battery with regressed test switch [6 ]

CP Chicago plenum (CCEA) [ 7 ]

SDT Stepdown transformer [ 8 ]

TC Adjustable mounting arms for 1-1/2″ – 2-1/4″ thick ceilings

TRIM [9 ]

TRIM TYPE DISTRIBUTION [ 1 0] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens [ 1 1 ]

S Non-conductive flush lens for shower applications [ 1 2 ]

W Wide 65° Open 50° Flush 50° RegressedM Medium 45° Open 35° Flush 30° RegressedN Narrow 10° Open 25° Flush 25° RegressedWW Wall wash [ 1 3 ]

OF 1/2″ standard flange

SF 1/4″ mud-in flange [ 1 4 ]

Open trim typesCS Clear semi-specular

anodizeSG Satin-glow anodizeGD Gold anodizeCG Champagne gold anodizePW Pewter anodizeSPC Clear specular anodizeRG Rose gold anodize WH White texture powder coat BL Black texture powder coat

Lens trim typesCS Clear semi-specular

powder coatWH White texture powder coat BL Black texture powder coatMB Black texture splay with

white flange [ 1 5 ]

MWT Textured white trim flange [ 1 6 ]

IP IP65 rated trim [ 1 7 ] AD Diffuse acrylic lens [ 1 8 ]

PD Diffuse 1/8″ polycarbonate lens [ 1 9 ]

TD Diffuse polycarbonate lens media at top of open reflector [ 2 0 ]

WET/CC Wet location, covered ceiling listed

AM Anti-microbial [ 2 1 ]

MOUNTINGMOUNTING TYPE [ 2 2 ] MOUNTING HARDWARE [ 2 3 ] N Open pan for new constructionI IC-rated enclosure for new construction [ 2 4 ]

R Remodel kit [ 2 5 ]

F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 2 6 ]

BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 7 ]

CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 2 8 ]

NEW CONSTRUCTION AND REMODEL

CATALOG #: ������������������������������������������������

TYPE: ������������������������������������������������������

PROJECT: ���������������������������������������������������ø4-1/2″

L8 - L15: 5-3/4″L24: 6-1/2″

1/2″ min1-7/16″ max

15″

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 1 of 5HEW.70712.LA REV.02/20/20

4DR 4.5″ Downlight – Round

Page 2: 4.5″ Downlight – RoundFEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane (95 CRI,Dim to warm from 1800K to 3000K CCT, minimum

FIXTURE PERFORMANCE DATA OPEN REFLECTOR TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 862

3000K 1800K

14.0 61.6M 830 14.0 59.3N 800 14.0 57.1

L15

W 1511 23.4 64.6M 1455 23.4 62.3N 1402 23.4 60.0

L24 W 2228 37.7 59.1

M 2226 37.7 59.0N 2228 37.7 59.1

FLUSH LENS TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 670

3000K 1800K

14.0 47.9M 760 14.0 54.3N 765 14.0 54.7

L15

W 1175 23.4 50.3M 1333 23.4 57.0N 1242 23.4 57.4

L24 W 1925 37.7 51.1

M 1995 37.7 52.9N 2197 37.7 58.3

6000

4000 30002500

2000 1500

REGRESSED LENS TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 678

3000K 1800K

14.0 48.4M 763 14.0 54.5N 769 14.0 54.9

L15

W 1188 23.4 50.8M 1337 23.4 57.2N 1348 23.4 57.7

L24 W 1945 37.7 51.6

M 1997 37.7 52.9N 2208 37.7 58.6

MULTIPLIER TABLESREFLECTOR FINISH

CATALOG NUMBER

CONVERSION FACTOR

O TR

IM

CS 1.00SG 1 0.92GD 0.93CG 0.96PW 0.86SPC 1.02RG 0.88

WH 1 0.89BL 1 0.47

R TRI

M WH 1.00CS 0.98BL 0.79

TRIM

CATALOG NUMBER

CONVERSION FACTOR

S 0.85AD 0.85PD 0.85TD 0.75

WET/CC 2 0.85

1 Distribution will also be affected, consult factory.

2 Use multiplier when specified with O Trim Type. ■ Photometrics tested in accordance with IESNA

LM-79. Results shown are based on 25ºC ambient temperature.

■ Wattage shown is based on 120V input. ■ Results based on 3000K, 95 CRI, full output,

actual lumens may vary +/-5% ■ Use multiplier table to calculate additional

options.

PHOTOMETRY4DR-TL-L24/9DW-DIM-UNV-OW-OF-CS Total Luminaire Output: 2228 lumens; 37.7 Watts | Efficacy: 59.1 lm/W | 95.0 CRI; 3604K CCT

90°

0° 20°

40°

80°

60°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 20115 2071 19815 2178 61725 2479 114735 341 21545 49 3855 12 1165 1 175 0 085 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2176 980 - 60 2226 1000 - 90 2228 1000-180 2228 100

4DR-TL-L24/9DW-DIM-UNV-OM-OF-CS Total Luminaire Output: 2226 lumens; 37.7 Watts | Efficacy: 59.0 lm/W | 95.0 CRI; 3600K CCT90°

0° 20°

40°

80°

60°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 45055 4458 38615 2571 73725 1990 86035 175 19945 40 3255 9 965 2 375 1 185 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0-40 2182 980-60 2223 990-90 2226 1000-180 2226 100

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 2 of 5HEW.70712.LA REV.02/20/20

4DR 4.5″ Downlight – Round

Page 3: 4.5″ Downlight – RoundFEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane (95 CRI,Dim to warm from 1800K to 3000K CCT, minimum

4DR-TL-L24/9DW-DIM-UNV-ON-OF-CS Total Luminaire Output: 2228 lumens; 37.7 Watts | Efficacy: 59.1 lm/W | 95.0 CRI; 3587K CCT90°

0° 20°

40°

80°

60°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 236975 11887 86415 2638 73825 1014 49635 99 11845 11 955 2 365 1 175 0 085 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0-40 2216 990-60 2227 1000-90 2228 1000-180 2228 100

4DR-TL-L24/9DW-DIM-UNV-OWW-OF-CS Total Luminaire Output: 1258 lumens; 37.7 Watts | Efficacy: 33.4 lm/W | 95.0 CRI; 3596K CCT

0° 20°

40°

60°

80°90°

-20°

-40°

-60°

-80°-90°

0° 90°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE

HORIZONTAL ANGLE ZONAL LUMENS0º 45º 90º 135º 180º

0 1152 1152 1152 1152 11525 1229 1175 1171 896 792 9815 1112 1104 1153 492 543 24725 1724 1283 1145 405 454 40635 482 287 248 339 378 22145 74 69 151 269 290 12955 33 31 78 159 160 8465 23 20 33 82 84 4875 8 5 13 40 38 2285 0 0 2 6 0 390 0 0 0 0 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 973 770 - 60 1185 940 - 90 1258 1000 - 180 1258 100

4DR-TL-L24/9DW-DIM-UNV-LM-OF-WH Total Luminaire Output: 1995 lumens; 37.7 Watts | Efficacy: 52.9 lm/W | 95.0 CRI; 3549K CCT90°

0° 20°

40°

80°

60°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 51625 4941 45115 3032 81125 820 39535 214 14345 98 7755 62 5665 38 3875 19 2085 4 590 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0-40 1800 900-60 1932 970-90 1995 1000-180 1995 100

4DR-TL-L24/9DW-DIM-UNV-RM-OF-WH Total Luminaire Output: 1997 lumens; 37.7 Watts | Efficacy: 52.9 lm/W | 95.0 CRI; 3546K CCT90°

0° 20°

40°

80°

60°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 57565 5364 47915 2980 80925 874 41835 216 14345 83 6655 47 4265 25 2575 10 1185 3 390 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0-40 1849 930-60 1958 980-90 1997 1000-180 1997 100

TRIMLOCK DETAILSTWIST PULL RELEASE

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 3 of 5HEW.70712.LA REV.02/20/20

4DR 4.5″ Downlight – Round

Page 4: 4.5″ Downlight – RoundFEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane (95 CRI,Dim to warm from 1800K to 3000K CCT, minimum

SLOPED CEILING ADAPTOR DETAILS

A

ø9″Ceiling cutout: ø9-3/8″

A (HEIGHT) PLENUM HEIGHTLUMENS 5° 10° 15° 20° 25° 30°

L8 - L15 8-13/16″ 8-15/16″ 9″ 8-15/16″ 8-7/8″ 8-11/16″ 9-1/4″L24 9-9/16″ 9-11/16″ 9-11/16″ 9-5/8″ 9-1/2″ 9-5/16″ 10″

15° Shown

TRIM TYPE DETAILSOPEN OPEN (WALL WASH) FLUSH SHOWER ANGLED REGRESSED

ø4-1/2″ ø4-1/2″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-3/8″ 1/8″

1-1/4″

FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)

ø5-1/2″

Ceiling Cutout: ø5″

ø5″Ceiling cutout: ø5-1/2″

1/2″1/8″

ø8″ø5-3/16″

REFLECTOR FINISH DETAILSSPC Clear specular

SG Satin-glow

PW Pewter

GD Gold

CG Champagne gold

RG Rose gold

CS Clear semi-specular

WH White

BL Black

MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL

15″

12″

ø5″6″

4-1/4″

B

C

A

D

LENGTHLUMENS A B C D

L8 15-3/16″ 16″ 6-3/8″ 12-1/8″L15 16-5/8″ 17-1/2″ 7-7/8″ 14″

Cross Section

ø4-1/2″

L8 - L15: 5-3/4″L24: 6-1/2″

Receiver Bracket

3-1/4″

2-3/4″

6-5/8″ 1-1/8″ minspace

Ceiling cutout

Driver and Junction Box

6-15/16″

4-1/8″

5-1/4″

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 4 of 5HEW.70712.LA REV.02/20/20

4DR 4.5″ Downlight – Round

Page 5: 4.5″ Downlight – RoundFEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane (95 CRI,Dim to warm from 1800K to 3000K CCT, minimum

EM/10W/RTS DETAILS

Shown Installed

Test buttonfrom EM Driver

RTS trim nut

RTS trim washer

RTS trim

RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout

MOUNTING HARDWARE DETAILS

F1 Integral 2-position fixed pan bracket, universal bar hanger included BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)

CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)

Mounts to t-bar or nailer bar

14″ minimum24″ maximum

Mounts to t-bar or nailer bar

14″ minimum24″ maximum

BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)

CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)

Mounts to t-bar or nailer bar

12″ minimum24″ maximum

Mounts to t-bar

11″ minimum26″ maximum

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 5 of 5HEW.70712.LA REV.02/20/20

4DR 4.5″ Downlight – Round