5. Logging in by Azure AD Certification

Guide for Configuring the INAZUMA Certified Systems - S-PAS

INAZUMA Head Office of Sony

Overview

0. Getting StartedTo be read in using the INAZUMA Certified Systems

Preparation

1. Receiving the user registration noticeAn e-mail notices the user when registration application has been accepted.

2. Installation of the Client CertificateClient Certificate is checked by the System for proving your PC identity upon using the System.

3. Preparation for Azure AD CertificationGoing through tasks needed in advance for Azure AD Certification

Connecting to the INAZUMA Certified Systems

4. SSL-VPN ConnectionSSL-VPN is an encrypted communication network.

5. Logging in to the target SystemHow authentication by Azure AD Certification operates

Agenda

Explanation Scope on this document

5. Azure AD CertificationAbout how to use Azure AD Certification

Contents

5. Azure AD Certification

（Blank Page）

Instructions on logging in to the INAZUMA Certification Systems by Azure AD Certification

Overview

[ Precondition ]

Steps

Tip

• If you are logging in for the first time, type the ID (e.g. e-mail address) that has been registered.

• As Azure AD Certification Login functions by “Single-Sign-On,” this screen will not be shown if you are already logged in.

（Azure AD Certification page）

Select the already registered mail address. Enter your password if requested.

5. Azure AD CertificationAbout how to use Azure AD Certification

Click the URL of the INAZUMA Certified Systems you would like to login to.(Check URL in Appendix)

End of Guide of Login through Azure AD Certification(Your target System top page –sample-)

- E-mail address is to be registered- Establishment of SSL-VPN Connection

(Not required for all systems )- Completion of preparation for Azure AD

Certification

1. The Azure AD Certification page is displayed when accessing the system through its URL.

2. Select the already registered mail address. Enter your password if requested.

Preparation and Login (S-PAS)Preparation and Login (S-PAS)

The two browsers below are the only browsers that support S-PAS.1. IE (Ver. 11) Browser2. Google Chrome Browser

The following preparations are necessary before usage of the System.(This section is described by Internet Explorer as an example.)

Preparations1. Set up Browser’s security info. (S-PAS site registration as trusted site)2. Set up Azure AD Certification. (Reset sign-in info.)3. Clear browser cache.

Login to S-PAS (via Azure AD Certification)

5

S-PAS Login

Preparation1. Set up Browser’s security info.

(Register S-PAS site to trusted site info.)Click

[Internet Option]2 Click[Internet Option]2 Click

[Security] Tab3 Click[Security] Tab3Click

[Tool Mark]1 Click[Tool Mark]1 Click [trusted site]

Then Click [Site]4 Click [trusted site]Then Click [Site]4 Enter S-PAS URL,

if not registered.5 Enter S-PAS URL, if not registered.5

Click [Add]6 Click [Add]6

*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/

2. Set up Azure AD Certification (Open browser, access the following URL and reset Azure AD Certification.)

https://myapps.microsoft.com

Click[Person Mark]1 Click[Person Mark]1 Click

[Person Mark]2 Click[Person Mark]2 Click [Sign Out

From All]4 Click [Sign OutFrom All]4Click

[Profile]3 Click[Profile]3 Click [OK]5 Click [OK]5

3. Clear browser cache

Preparation

Click[Tool Mark]6 Click[Tool Mark]6 Click

[Internet Option]7 Click [Internet Option]7 Click [Access

History Delete]8 Click [AccessHistory Delete]8 Click [Delete]10 Click [Delete]10

Access History is Deleted

「Do Not Check[Preserve Favorites website data]9 「Do Not Check[Preserve Favorites website data]9

Login to S-PAS is as follows.

Login to S-PAS (via Azure AD Certification)

Click [Mail Address]2 Click [Mail Address]2

Select Depart/Depart Code

(Additional Post User)3

Select Depart/Depart Code

(Additional Post User)3

S-PAS Initial Screen

Enter S-PAS URL1 Enter S-PAS URL1

Only First Time

Click 「OK」6 Click 「OK」6

Click 「OK」4 Click 「OK」4

Select Department CS※No Need to Select Role5 Select Department CS※No Need to Select Role5

*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/

When you cannot login to S-PAS KENGAIWhen you cannot login to S-PAS KENGAI

When you cannot login to S-PAS KENGAI■ Confirm and Reset

1. Browser’s security info. (S-PAS site registration to trusted site info.)2. Azure AD authentication info. (Reset sign-in info.)3. Browser cache (Clear cache of browser)

■ S-PAS Login (Use Azure AD Certification)

■ Solutions when login is unavailable with options above4. Azure AD Certification Reset (Option 2 Above)5. Browser Cache Clear (Option 3 Above)6. PC Restart

■ S-PAS Login (Use Azure AD Certification)

The two browsers below are the only browsers that support S-PAS.1. IE (Ver. 11) Browser2. Google Chrome Browser

The following preparations are necessary before usage of the System.(This section is described by Internet Explorer as an example.)

Preparations1. Set up Browser’s security info. (S-PAS site registration as trusted site)2. Set up Azure AD Certification. (Reset sign-in info.)3. Clear browser cache.

Login to S-PAS (via Azure AD Certification)

11

S-PAS Login

Confirm and Reset1. Set up Browser’s security info.

(Register S-PAS site to trusted site info.)Click

[Internet Option]2 Click[Internet Option]2 Click

[Security] Tab3 Click[Security] Tab3Click

[Tool Mark]1 Click[Tool Mark]1 Click [trusted site]

Then Click [Site]4 Click [trusted site]Then Click [Site]4 Enter S-PAS URL,

if not registered.5 Enter S-PAS URL, if not registered.5

Click [Add]6 Click [Add]6

*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/

2. Set up Azure AD Certification (Open browser, access the following URL and reset Azure AD Certification.)

https://myapps.microsoft.com

Click[Person Mark]1 Click[Person Mark]1 Click

[Person Mark]2 Click[Person Mark]2 Click [Sign Out

From All]4 Click [Sign OutFrom All]4Click

[Profile]3 Click[Profile]3 Click [OK]5 Click [OK]5

3. Clear browser’s cache

Confirm and Reset

Click[Tool Mark]6 Click[Tool Mark]6 Click

[Internet Option]7 Click [Internet Option]7 Click [Access

History Delete]8 Click [AccessHistory Delete]8 Click [Delete]10 Click [Delete]10

「Do Not Check[Preserve Favorites website data]9 「Do Not Check[Preserve Favorites website data]9

Access History is Deleted

Login to S-PAS is as follows.

Login to S-PAS (via Azure AD Certification system)

Click [Mail Address]2 Click [Mail Address]2

Select Depart/Depart Code

(Additional Post User)3

Select Depart/Depart Code

(Additional Post User)3

S-PAS Initial Screen

Enter S-PAS URL1 Enter S-PAS URL1

Only First Time

Click 「OK」6 Click 「OK」6

Click 「OK」4 Click 「OK」4

Select Department CS※No Need to Select Role5 Select Department CS※No Need to Select Role5

*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/

AppendixAppendix

Appendix Access to INAZUMA Certified Systems

System Certification Type URL

S-Cabinet v2 (Inside Japan) Azure AD Certification https://s-cabinet.inazuma.sony.co.jp/v2/jsp/index.jsp

S-Cabinet v2 (Outside Japan) Azure AD Certification https://s-cabinet2.inazuma.sony.co.jp/v2/jsp/index.jsp

S-PAS KENGAI Azure AD Certification https://www.s-pas.sony.biz/3dspace/

Elephant (JIRA Included) Azure AD Certification https://www.tool.sony.biz/

Login to each INAZUMA Certified System from the URL below.

Revision History

Revision History

Date Ver. Contents for change Editor2018/08/17 1.0 First issue S-PAS Office

2019/09/24 1.1 Change in Agenda 3[Appendix Access to INAZUMA Certified Systems] Elephant certification has been changed to Azure AD Certification

INAZUMA Head Office

E.O.F.E.O.F.