5 material movers - us pricing

30

SC1250 -Conveys approx. 500 lbs/hrWhisper Loaders

Base Model SC1250 Features Spun & welded aluminum Di-Ac filter (pellet or granual service) Electrical control box with power cord (12 ft.) Flexible hose with pick-up lance High level control of receiving hopper Motor and turbine (vacuum producer) Great value at $962.00 Stainless Steel Model SC1250SS Same features as SC1250 Spun and welded stainless steel receiver$2,492.00

Self Cleaning Model SC1250VP Same features as SC1250 Vibra-Pulse filter cleaning system$1,222.00 Extra Tall Model SC1250XT Same features as SC1250 Extra tall receiver - 4 taller than standard$1,204.00 Integral Proportioning Model SC1250PLVP Same features as SC1250 Vibra-Pulse filter cleaning system Integral proportioning Proportional control timer$2,490.00

Material Intake Tube accepts 114 I.D. Hose

Includes 10 ft. of 114I.D. flexible material hose, pick-up probe and clamps (in clud ed) Proportional options in clude (2) lengths of hose or 10 lengths.

Patented Quiet-By-Pass Air-Cooled Motor

Pre-Drilled base for easy installation on hopper lid.

Remote Panel available add $86.00

Material Discharge Spout

This basic model is available in many variations. See options on page 33. Please dont hesitate to ask our sales people for help!

Microprocessor based, solid state electrical control box w/12ft. pow er cord contains - circuit breaker, on/off, in di ca tor lights, cy cle timer (and Vibra-Pulse Air Blast Timer on VP Models only)

Complete Systemas low as$962.00

Quick Release Latches

31

A

SC1500 -Conveys approx. 1400 lbs/hrWhisper Loaders

Sound AttenuationSound Absorbing Exhaust Hood

Base Model SC1500 Features Spun & welded aluminum Sound attenuation Di-Ac filter (pellet or granual service) Electrical control box with power cord (12 ft.) Flexible hose with pick-up lance High level control of receiving hopper Motor and turbine (vacuum producer)$1,733.00 Stainless Steel Model SC1500SS Same features as SC1250 Welded stainless steel receiver$3,645.00

Self Cleaning Model SC1500VP Same features as SC1500 Felt Filter Vibra-Pulse filter cleaning system$2,021.00 Integral Proportioning Model SC1500PLVP Same features as SC1500 Vibra-Pulse filter cleaning system Integral proportioning Proportional control timer$2,629.00


Includes 10 ft. of 112I.D. flexible material hose, pick-up probe and clamps (in clud ed) Proportional options in clude (2) lengths of hose or 10 lengths.

Patented Quiet-By-PassAir-Cooled Motor

Pre-Drilled base for easy installation on hopper lid.




Optional: 240 Volt/1 Phase 50 or 60 Hz on Model SC150VP add $320.00 Note: All panels remote, Pulse clean system requires .5 SCFM at 80 PSI

Complete System as low as $1,733.00

32

SC1750 - Conveys approx. 1700 lbs/hrWhisper Loaders

Complete System as low as$2,309.00


Includes 10 ft. of 134 I.D. flexible material hose, pick-up probe and clamps (in clud ed) Proportional options in clude (2) lengths of hose or 10 lengths.

Sound AttenuationSound Absorbing Exhaust Hood


Patented Quiet-By-PassAir-Cooled Motor

Pre-Drilled base for easy installation on hopper lid



Base Model SC1750 Features: Spun & Welded Aluminum Sound attenuation Di-Ac filter (pellet or granual service) Electrical control box with power cord (12 ft.) Flexible hose with pick-up lance High level control of receiving hopper Motor and turbine (vacuum producer)$2,309.00 Stainless Steel Model SC1750SS Same features as SC1750 Welded stainless steel receiver$4,101 .00

Self Cleaning Model SC1750VP Same features as SC1750 Vibra-Pulse filter cleaning system$2,650.00 Integral Proportioning Model SC1750PLVP Same features as SC1750 Vibra-Pulse filter cleaning system Integral proportioning Proportional control timer$3,383.00

Optional: 240 Volt/1 Phase 50 or 60 Hz on Model SC150VP add $320.00 Note: All panels remote, Pulse clean system requires .5 SCFM at 80 PSI

33

A

Whisper LoadersOptions and Accessories

Interblend is a static in ter nal blend er used to mix two prod ucts with out lay er ing.

Powder Recelvers Models SC150PR3C and SC150PR3CSS in cor po rate pleat ed fil ters and pulse clean ing, re sult ing in ef fi cient conveying of fine pow ders.

Replacement Part Kits Model SC1250 Parts Kit PN# 100264. $113.47 includes: (2) 9 DI-AC filters (1) 9 Dia. filter gasket (2) Sets motor brushesModel SC1500 Parts Kit PN# 100328. $133.84 includes: (2) 14 DI-AC filters (1) 14 Dia. filter gasket (2) Sets motor brushesModel SC1750 Parts Kit PN# 100804. $145.88includes: (2) 14 DI-AC filters (1) 14 Dia. filter gasket (2) Sets motor brushes

Replacement Parts 9 Felt Filter for SC1250VP and PLVP models .......PN#100280 $28.089 DI-AC Filter.............. PN# 100216 $40.15 Gasket for SC1250........ PN# 101261 $14.38 14 Felt Filter for SC1500/1750VP and PLVP models.......PN#100293 $36.3814 DI-AC Filter............ PN# 100086 $63.60Gasket for SC1500, SC1750.......................... PN# 101262 $19.78

Vibra-Pulse fil ter clean ing sys tem is used for con vey ing regrind or dusty ma te ri als. Filter is au to mat i cal ly cleaned with a pulse of com pressed air, which shakes filter clean.

Proportional Control Tim erMicroprocessor based, solid state control tim er, with easy access pro por tion ad just able knob on out side of control enclosure. (not pic tured)

Integral Pro por tion ing Allows for the alternate conveying of two dif fer ent materials. Using the optional Interblend el e ment, a static internal blend er will mix two products without layering.

34

Motorless Venturi LoaderMotorless EZ Loaders

Operatesoncompressedair Perfectfortransportingmaterial from drying hoppergranulators or boxes Easy-to-use&install the EZ Loader is fully au to mat icstarting and stopping is controlled by the prox im i ty sensor. Unit requires compressed air and 120/1/60 power, hook up hoses and its ready to go Economical, no moving parts, no brushes to replace Fastconveys 1000 lbs. per hour from the press to 10 height StainlessSteelConstruction, rust con tam i na tion is elim i nat ed.Specifications

ModelNSO1

& NSO1SNSO2

& NSO2SNSO3

& NSO3SAir Pressure required

80 P.S.I. 80 P.S.I. 80 P.S.I.

Voltage required 120/60/1 120/60/1 120/60/1Hopper Ht. & Diameter

18.5H x8.25 Dia

18.5H x8.25 Dia

18.5H x8.25 Dia

Flange Diameter 5 5 5

Material Line Size114, 10

(supplied)114, 10

(2 supplied)114, 10

(supplied)Single Entry EZ Loader Model NSO-1S Virgin material model with sight glass 3BaseModelsavailable

SingleEntryEZLoaderFor use with virgin material 1000 lbs per hour max throughput

ModelsNSO1andNSO1Sinclude: Filter Receiver Assembly Air Control Assembly Ten feet of 114 material hose and two hose clamps Ten feet of 38 compressed air hose Proximity switch One 20' suction wand with venturi Operating and installation manual

Model NSO1.............$1221.00 Model NSO1S...........$1390.00Includes sight glass assembly

DualEntryEZLoaderFor use with virgin/regrind 2000 lbs per hour max throughput

ModelsNSO2andNSO2Sinclude: Filter Receiver Assembly Master Air Control Assembly Slave Air Control Assembly Two ten foot lengths of 114 material hose and four hose clamps Two ten foot lengths of 38 compressed air hose One Proximity Switch Two 20" suction wands with venturis Operating and Installation Manual

Model NSO2..................$1630.00 Model NSO2S................$1793.00Includes sight glass assembly

GranulatorUnloadingEZLoaderFor use with virgin/regrind 1000 lbs per hour max throughput

ModelsNSO3andNSO3Sinclude: Filter Receiver Assembly with Mount ing Flange Air Control Assembly Ten feet of 114 material hose and two hose clamps and 20" wand Ten feet of 38 compressed air hose Venturi with coupler (or suction wand) to couple to granulator tube (we must know OD of tube) Operating and installation manual

Model NSO3........................$785.00 Model NSO3S......................$960.00 Includes Granulator Exhaust Assembly

35

A

Typical In stal la tion Ar range mentsMotorless EZ Loaders

Micro EZ LoaderThis small venturi loader is designed to convey CLEAN Virgin Ma te ri al to small injection molding ma chines using a max i mum of 25 pounds per hour of pelletized plastic material.

This small, lightweight, quiet unit is ideal for use on small machines running pelletized virgin material, or to convey color concentrate to color feeders. The receiving tube is of stainless steel so that ma te ri al contamination will not take place, and it can be used with the EZ Loader sight glass and all of the other EZ Loader options. Just supply com pressed air and 120/1/60 electric power to the unit and you are ready to load. The sensor starts and stops the unit so that conveying is fully automatic.

SpecificationsModel NSOM

Air pressure Required 80 P.S.IVoltage Required 120/60/1Receiving Tube Ht. 10Flange Diameter 5Material Line Size 114

Affordable Price!

$805.00

InjectionMoldingMachine

LevelControl

Material Receiverand Filter

CompressedAir line

ControlUnit

Venturi

MaterialGaylord

Hopper MountVirgin Material


LevelControl


CompressedAir line

ControlUnit

Venturi

MaterialGaylord

Machine MountVirgin Material

Sight Glass


LevelControl


CompressedAir line

Venturi

VenturiControl

VenturiControl

Granulator

Sight Glass

Machine MountVirgin and Regrind

Material

Options Available:

$135.00 PN# 200202

Pictured with level switch & optional magnet

Sight Glass Assembly (6 Height)

Granulator Exhaust Assembly

Bullet Magnet Suc tion Box Spare Filter

$235.00 PN# 200206

$175.00 PN# 200207

$180.00 PN# 200237

Options Not Pictured

$30.00 PN# 200100

Light Only $305.00

PN# 200229

Out-of-Material Indicator

Proximity Switch PN# 200191 $190.00

Universal Wand PN# 200215 $280.00

Vibrator for Wand PN# 200116 $444.00

Bag Filter option for fines PN# 200130 $250.00

INCLUDES:10' of 1-1/4 material hose with 20" band 10' of 3/8 air hose proximity switch

36

Optimized to Sense todays Lower-Density, Lower Moisture Plastics Regrind and Pellets!

ifm efector Level Sensors

ifm efector raises the bar in sensing plastics materials. For years, ifm capacitive level sensors have been a proven solution for applications on loaders, blenders and grinders in the plastics processing industry.

Traditional capacitive sensors can detect high-density materials with high-moisture content. However, plastic materials are now being dried at higher temperatures producing very low moisture content. The resulting materials can cause sensing problems for traditional capacitive sensors.

ifm efectors new KN level sensor incorporates improved capacitive sensing electrodes and patented circuitry to detect low-moisture, low-density materials. Combined, these innovations enable the KN sensor to perform in todays plastic processing applications.

Output Part No. Price EachMicro DC, PNP, NO/NC KN5120 $160.00Micro DC, NPN, NO/NC KN5122 $160.00Micro AC, NO KN0005 $193.00Micro AC, NC KN0006 $193.00

SpecificationsElectrical Design DC AC

Wiring 3-wire 2-wireConnection Micro DC Micro ACOperatingVoltage [V]

1036 30250

Current Rating[mA] 250 250Voltage Drop

56

Patented Linear Standoff Design!Prevents intake blockage from the bottom of the box or bag.

Pick-Up Wands

The Dissipator Series Shock-Free Vacuum Wands Eliminates static electric shocks; improves employee welfare and safety. Eliminates need for ground wire in hose*; speeds installation; reduces maintenance cost. Slick and smooth inner surface; increase throughput; allows free flow of powder, pellets, flakes, or granules. Durable, high-impact polymer construction withstands use temperatures to 150F Light-weight, easy to handle.

*Groundwirerecommendedinhazardousareas.Refertogroupandclassinstallationguidelines.

Built-in venting! (to aid in lifting certain materials)

Model Number

Description Price

T1501 48OAL,112dia.w/ventholes $68.50

T2001 48OAL,2dia.w/ventholes $73.70

T1502 48OAL,112dia.w/adj.vents $123.50

T2002 48OAL,2dia.w/adj.vents $131.60

Adjustable Vents Vent Holes

57

A

Wonder Gun

The Wonder Gun will convey material to hoppers on molding machines. The swirling vortex action enables it to convey many granular or powered materials to heights of 25 ft. or horizontal distances up to 50 ft. Average conveying rates are approximately 7 lbs/minute.

Attached to filtered shop air the Wonder Gun will act as a large area blow gun or with a simple reversal of the venturi a vacuum cleaner or material transfer pump. The venturi effect will boost incoming air flow by more than 12 times! This means, for example, that a 10 CFM supply will result in an output flow of approximately 120 CFM!

Wonder Gun Includes: Two Way Gun, Vacuum Bag and 712 Bench Nozzle.

10 Hose: Crush Proof Hose with Cuffs.

Compressedair inlet

B L OW

2 3 4 51

1 Body2 O-Ring3 Venturi4 O-Ring5 End section

V A C U U M

Part Number WGV500 Wonder Gun ................ $35.00Part Number WGV500h 10 Hose .................... $18.00

58

Conveys Parts, Materials & Waste - with no Moving Parts!Line Vac

In-Line ConveyingThis Line Vac connects to standard hose or pipe to create a powerful in-line conveyor. The compact design features large throat diameters for maximum throughput capability. Nine sizes in alu mi num

and eight in stainless steel are suited to a wide variety of trans fer applications.

The Line Vac injects a small amount of com pressed air through directed nozzles to

produce a vacuum on one end and high output flows on the other with instantaneous response.

The material flow rate is easily con trolled with a pressure reg u la tor. No mov ing parts or electricity

assures maintenance free operation.

See Next Page for Pricing!

The Problem: Injection molding machines transform plastic pellets into various plastic products. The pellets are gravity fed from a hopper on top of the machine. The bucket and ladder method of re plen ish ing the hopper was inefficientand ex pen sive.

The Solution: A Model 6982 114 Line Vac Kit was used to convey the pellets up to the hopper. The mounting bracket in clud ed with the kit was used to secure the Line Vac to the machine. A filter assured no contamination of the plastic material and a regulator controlled the plastic flow rate.

Unlike mechanical transfer systems that break down or wear out, the Line Vac has no moving parts. This low cost method of conveying gives precise control of ma te ri al flow into the hopper.

Line Vacs are available in many sizes in both aluminum and stainless steelLine Vac Kit includes a Line Vac, mounting bracket,

filter separator and a pressure regulator

Model 6982 Line Vac Kit

Compressed Air Supply

How Line Vac WorksCompressed air flows through the inlet (1). into an annular plenum chamber (2). It is then injected into the throat through directed nozzles (3). These jets of air create a vacuum at the intake (4). which draws material in and accelerates it through the unit (5). at long vertical or horizontal distances.

59

A

Line Vac

Aluminum Line Vac OnlyMod el # Description Price6080 34AluminumLineVacOnly $84.006081 1AluminumLineVacOnly $90.006082 1-14AluminumLineVacOnly $102.006083 1-12AluminumLineVacOnly $126.006084 2AluminumLineVacOnly $149.006085 2-12AluminumLineVacOnly $215.006086 3AluminumLineVacOnly $340.006087 4AluminumLineVacOnly $477.006088 5AluminumLineVacOnly $632.00

Stainless Steel Line Vac OnlyMod el # Description Price6060 34SSLineVacOnly $239.006061 1SSLineVacOnly $251.006062 1-14SSLineVacOnly $275.006063 1-12SSLineVacOnly $299.006064 2SSLineVacOnly $316.006065 2-12SSLineVacOnly $568.006066 3SSLineVacOnly $1,034.006067 4SSLineVacOnly $1,579.00

Aluminum Line Vac KITMod el # Description Price6980 34AluminumLineVacKit $242.006981 1AluminumLineVacKit $248.006982 1-14AluminumLineVacKit $261.006983 1-12AluminumLineVacKit $284.006984 2AluminumLineVacKit $309.006985 2-12AluminumLineVacKit $408.006986 3AluminumLineVacKit $517.006987 4AluminumLineVacKit $707.006988 5AluminumLineVacKit $863.00

KitincludesLineVac,mountingbracket,filterseparatorandpressureregulator

Stainless Steel Line Vac KITMod el # Description Price6960 34SSLineVacKit $390.006961 1SSLineVacKit $401.006962 1-14SSLineVacKit $426.006963 1-12SSLineVacKit $448.006964 2SSLineVacKit $467.006965 2-12SSLineVacKit $743.006966 3SSLineVacKit $1,236.006967 4SSLineVacKit $1,754.00

KitincludesLineVac,mountingbracket,filterseparatorandpressureregulator

AccessoriesModel # Description Price6995 MountingBracketfor34&1 $19.006996 MountingBr.for1-14&1-12 $21.006997 MountingBr.For2&2-12 $24.006998 MountingBr.For3&4 $29.006999 MountingBr.For5 $38.009001 AutoDrainFilterSep.14NPT $83.009002 AutoDrainFilterSep.34NPT $138.009005 OilRemovalFilter38NPT $138.009006 OilRemovalFilter34NPT $276.009008 PressureReg.w/gauge14NPT $42.009009 PressureReg.w/gauge34NPT $68.00

Aluminum Threaded Line Vac OnlyModel # Description Price140075 34AluminumLineVacOnly $95.00140100 1AluminumLineVacOnly $119.00140125 114AluminumLineVacOnly $149.00140150 112AluminumLineVacOnly $179.00140200 2AluminumLineVacOnly $214.00

Threaded Line VacLow cost conveyor uses ordinary pipe! Convey parts, materials. waste-with no moving parts! A fast, low cost way to convey: plastic pellets, scrap trim, textiles, bulk solids, chips, paper, small parts, shavings, sawdust, granules. Our new Threaded Line Vac Air Operated Conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. Threaded Line Vac attaches easily to plumbing pipe couplers, making it easy to build a complete system using ordinary pipe and fittings available from any home center, hardware store or plumbers supply. Perfomance is the same as our standard Line Vac.

Aluminum Threaded Line Vac KITModel # Description Price142075 34AluminumLineVacKit $253.00142100 1AluminumLineVacKit $276.00142125 114AluminumLineVacKit $306.00142150 112AluminumLineVacKit $334.00142200 2AluminumLineVacKit $371.00

60

Pump 55 Gallons in 90 seconds!! Two-way Pumping Action!Reversible Drum Vac

What is the Drum Vac?A safe, maintenance-free way to recover: Coolant Hydraulic oils Liquid spills Sludge and chips Tramp oil Waste water

Why the Reversible Drum Vac?EXAIRs compressed air operated Reversible Drum Vac System attaches quickly to any closed head 30 or 55 gallon drum. Its high powered vacuum fills the drum in less than two minutes. With the simple turn of a knob, the same stainless steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.Electrically operated all purpose vacuums arent designed for use in industrial environments. As a result, motors wear out quickly and impellers clog. The Reversible Drum Vac does not use electricity and has no moving parts, assuring maintenance-free operation. An automatic safety shutoff valve prevents spills or overfilling.

Applications Coolant sumps Food pro cess ing Lathes Floor cleanup EDM machines Pits Screw ma chines Machining centers Tanks

The Model 6296 Deluxe Reversible Drum Vac System includes a 55 gallon drum dolly, spill

recovery kit, vacuum hose and all tools.

The Model 6196 and 6196-30 Reversible Drum Vac System includes a vacuum hose and

an aluminum wand

Model # Description Price Each

619655 gallon Reversible Drum Vac System-includes:two-waypumpassembly(14NPT),shutoffvalve,10(3m)flexiblevacummhose(112/38mmI.D.)with90quickreleaseelblowconnection,(1)aluminumwand(drumnotincluded).

$439.00

629655 gallon Deluxe Reversible Drum Vac System-sameasaboveandaddsdrumdolly,spillrecoverykit,(2)extensionwands,crevicetool,andskimmertool(drumnotincluded).

$724.00

6196-3030 gallon Reversible Drum Vac System-includes:two-waypumpassembly(14NPT),shutoffvalve,10(3m)flexiblevacummhose(112/38mmI.D.)with90quickreleaseelblowconnection,(1)aluminumwand(drumnotincluded).

Call

9001 AutoDrainFilterSeparator-38NPT,65SCFM(1841SLPM) $83.009005 OilRemovalFilter-38NPT,15-37SCFM(425-1048SLPM) $138.009041 55gallondrumdolly Call

6901SpillRecoveryKit-Includesaone-piece54(1372mm)ABSwandanda14(356mm)doublebladesqueegeetool.

$112.00

Warning: Donotusewithanymaterialwithalowflashpointorwithflammableliquidssuchasfueloil,alcohol,mineralspirits,gasoline,orkerosene.

5 Year Warranty!

Advantages No moving parts Maintenance free Stainless steel construction Safe - no electricity Built-in pressure/vacuum relief Compact and portable Installs quickly Spill free - auto safety shutoff Fits standard closed head drum

61

A

Chip Vac

What is the Chip Vac? EXAIRs Chip Vac picks up dry or wet chips and delivers them directly to an ordinary 55 gallon drum. Chip Vac is used to clean chips from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equip ment. Why the Chip Vac? The compressed air operated Chip Vac is an industrial duty vacuum designed specifically for vac u um ing chips. It creates a powerful cyclonic action that vac u ums metal, wood or plastic chips into a 55 gallon drum. Dusty ma te ri als such as absorbents are trapped by the 0.1 micron filter bag to keep the surrounding air clean. Electrically operated all purpose vacuums arent de signed for use in industrial environments. As a result, motors wear out quickly and impellers clog. Chip Vac has no moving parts to wear out or break which en sures long life. Sound level is half that of electric vacuums. Chip Vacs lever lock drum lid fits an ordinary open head 55 gallon drum. In less than a minute, the Chip Vac can be removed and easily placed onto another drum to keep different materials separate for recycling. Constant heavy lifting and dumping of vacuum cleaner tanks is eliminated since all chips are vacuumed directly to the 55 gallon drum.

Applications CNCs Lathes Saws Mills Drills Grinders Routers Molding machines Absorbent pick-up

Compressed air, normally 80100 PSIG (5.56.9 BAR), flows through the inlet (1) into an annular plenum chamber (2). It is then injected into the throat through directed nozzles (3).

These jets of air create a vacuum at the intake (4) which draws material in and accelerates it through the unit (5). An elbow at the exhaust (6) directs the air in a cyclonic motion against the inside wall of the drum. Chips and other particulate drop to the bottom of the drum. The airflow exhausts through the port in the drum lid (7). Airborne particulates are trapped by the 0.1 micron filter bag.

The Chip Vac System can be used with an open head steel, fiber or plastic drum that is in good condition (ANSI Standard #MH2-1997). To pre vent material contamination, a poly drum liner can be in sert ed into the drum.

Easy Cleaning - A dirty filter bag can put back pressure on the Chip Vac, resulting in reduced suction. The reusable bag should be removed and shaken over a waste container to remove bulk particulate. The filter bag can be washed in a manner suitable for delicate fabrics.

Air consumption has been minimized by using the appropriate amount of air required for vacuuming chips.

Part Number Description Price

6193ChipVacSystem-includesChipVac,leverlockdrumlid,shutoffvalve,10chemicalresistanthose(1.5/38mmI.D.),chipwand,extensions,crevicetool,brush,skimmertoolandfloortool(drumnotincluded)

$561.00

9001 AutoDrainFilterSeparator-14NPT,73SCFM(2067SLPM) $83.009005 OilRemovalFilter-38NPT,37SCFM(1048SLPM) $138.006804 FilterBag $46.00

Pressure Supply

Air Consumption

PSIG BAR SCFM SLPM INLET80 5.5 40 1132 38NPT

Advantages No moving parts Low cost No motors to clog or wear out No electricity Dust free operation Chips go directly into a drum Powerful cyclonic action Includes accessories 50% quieter than electric vacs

Room air remains dust free as the Chip Vac removes dusty

ab sor bent.

The Chip Vac removes abrasive stain less steel chips

from a CNC.Vacuums chips di rect ly into a

55 gallon drum with no moving parts.

Now with 30% More Vacuum!

5 material movers - us pricing

Documents