5 telecommunication
DESCRIPTION
qsm556TRANSCRIPT
MALAYSIAN STANDARDS
SECTORIAL CATALOGUE
2007
No. 5
TELECOMMUNICATION,
INFORMATION TECHNOLOGY
&
OFFICE EQUIPMENT
Department of Standards Malaysia
Ministry of Science, Technology & Innovation
Level 1 & 2, Block C4, Complex C
Federal Government Administrative Centre
62502 Putrajaya, MALAYSIA
Tel : 603-8885 8000
Fax : 603-8888 5060
E-Mail : [email protected]
http://www.standardsmalaysia.gov.my
INTRODUCTION
The Department of Standards Malaysia (Standards Malaysia) is the national standardisation and
accreditation body.
The main function of the Department is to foster and promote standards, standardisation and
accreditation as a means of advancing the national economy, promoting industrial efficiency and
development, benefiting the health and safety of the public, protecting the consumers, facilitating
domestic and international trade and furthering international cooperation in relation to standards and
standardisation.
Malaysian Standards are developed through consensus by committees which comprise of balanced
representation of producers, users, consumers and others with relevant interests, as may be appropriate
to the subject in hand. These standards where appropriate are adoption of international standards.
Approval of a standard as a Malaysian Standard is governed by the Standards of Malaysia Act 1996
(Act 549). Malaysian Standards are reviewed periodically. The use of Malaysian Standard is voluntary
except in so far as they are made mandatory by regulatory authorities by means of regulations, local
by-laws or any other similar ways.
The Department of Standards Malaysia appoints SIRIM Berhad as the agent to develop Malaysian
Standards.
The Industry Standards Committees (ISCs) established by SIRIM Berhad are responsible for the
development of Malaysian Standards in their respective areas, as follows:
ISC A - Food and Agriculture
ISC B - Chemicals and Materials
ISC C - Consumer Products, Personal Safety and Services
ISC D - Building and Civil Engineering
ISC E - Electrotechnical
ISC F - Mechanical Engineering
ISC G - Information Technology, Communications and Multimedia
ISC H - Petroleum and Gas
ISC J - Plastics and Plastics Products
ISC K - Packaging and Distribution
ISC L - Road Vehicles
ISC M - Fire Safety and Prevention
ISC N - Rubber and Rubber Products
ISC W - Occupational Health and Safety
NC Y - Quality Management and Quality Assurance
NC Z - Environmental Standards
More than 100 standards development committees involving more than 1500 individuals, have been
established under the ISCs.
(ii)
ABBREVIATIONS
MS : Malaysian Standard
MS ISO : Malaysian Standard which is identical to International Organization for
Standardization (ISO) Standard. The numbering of the standard is identical to that
of the ISO Standard except for the prefix.
MS ISO/IEC : Malaysian Standard which is identical to the Joint ISO and IEC Standard. The
numbering of the standard is identical to that of the ISO/IEC Standard except for
the prefix.
MS.....(P) : Provisional Standard
Malaysian Standard which is adopted/adapted from international, regional or foreign national standard
without undergoing standards development committee deliberations due to its urgent need, as iden-
tified by the Department of Standards Malaysia. Provisional Standards are identified by a letter “P”
following the MS number.
Malaysian Standards Sectorial Catalogue 2007
This sectorial catalogue lists as at September 2007, Malaysian standards that have been established
on product specifications, codes of practice, terminologies, guides and method of test on selected
sectors.
New standards, revisions, amendments, addenda, errata and reconfirmed standards as well as
standards that have been withdrawn are published bi-monthly in the SIRIM Berhad’s newsletter
Standards and Quality News.
An online system is available for searching and online purchasing. Payment can be made by credit
card. The system is called the MS Online System and can be accessed at http://www.msonline.gov.my.
The MS Online system contains over 4,000 Malaysian standards on all sectors.
List of Sectorial Catalogue 2007
1. Quality Management System, Environmental Management System & Safety and Health Protection
2. Health Care Technology, Metrology and Measurement. Testing
3. Mechanical and Fluid System and Components. Manufacturing Engineering, Energy and Heat
Transfer Engineering
4. Electrical Engineering & Electronics
5. Telecommunication, Information Technology. Office Equipment
6. Road Vehicles Engineering, Material Handling Equipment, Packaging & Distribution of Goods.
7. Textile and Leather Technology and Clothing Industry
8. Agriculture and Food Technology
9. Chemical Technology, Mining and Minerals, Petroleum and related technology & Metallurgy
10. Wood Technology, Glass & Ceramics Industries, Paper Technology and Paints & Colour Industries
11. Rubber & Plastics Industries
12. Constructions Materials & Building. Civil Engineering. Housekeeping. Entertainment. Sports.
(iii)
SUBJECT STRUCTURE ACCORDING TO
INTERNATIONAL CLASSIFICATION OF STANDARDS
(iv)
01. Generalities. Terminologies. Standardization
03. Sociology. Services. Company Organization
and Management. Administration. Transport.
07. Mathematics. Natural Sciences.
11. Health Care Technology.
13. Environment. Health Protection. Safety
17. Metrology and Measurement. Physical
Phenomena
19. Testing.
21. Mechanical Systems and Components for
General Use.
23. Fluid Systems and Components for General
Use.
25. Manufacturing Engineering.
27. Energy and Heat Transfer Engineering.
31. Electronics.
33. Telecommunications. Audio and Video
Engineering.
35. Information Technology. Office Machines.
37. Image Technology.
39. Precision Mechanics. Jewellery.
43. Road Vehicles Engineering.
45. Railway Engineering.
47. Shipbuilding and Marine Structures.
49. Aircraft and Space Vehicle Engineering.
53. Materials Handling Equipment.
55. Packaging and Distribution of Goods.
59. Textile and Leather Technology.
61. Clothing Industry.
65. Agriculture.
67. Food Technology.
71. Chemical Technology.
73. Mining and Minerals.
75. Petroleum and Related Technologies.
77. Metallurgy.
79. Wood Technology.
81. Glass and Ceramics Industries.
83. Rubber and Plastics Industries.
85. Paper Technology.
87. Paint and Colour Industries.
91. Construction Materials and Building.
93. Civil Engineering.
95. Military Engineering.
97. Domestics and Commercial Equipment.
Entertainment. Sports.
CONTENTS
PageIntroduction ------------------------------------------------------------------------------------------------------------------------ (ii)
Malaysian Standards Sectorial Catalogue ----------------------------------------------------------------------------- (iii)
Abbreviation ----------------------------------------------------------------------------------------------------------------------- (iii)
Subject Structure by ICS ----------------------------------------------------------------------------------------------------- (iv)
TELECOMMUNICATIONS AUDIO & VIDEO ENGINEERING
Telecommunications in general -------------------------------------------------------------------------------------------- 1
Telecommunication systems ------------------------------------------------------------------------------------------------- 1
Telephone networks ------------------------------------------------------------------------------------------------------------- 1
Other equipment for telecommunication systems ---------------------------------------------------------------------- 2
Integrated services Digital Network (ISDN) ------------------------------------------------------------------------------- 2
Electromagnetic compatibility (EMC) --------------------------------------------------------------------------------------- 2
Electromagnetic compatibility in general ---------------------------------------------------------------------------------- 2
Emission---------------------------------------------------------------------------------------------------------------------------- 5
Immunity----------------------------------------------------------------------------------------------------------------------------- 7
Other aspects related to EMC-------------------------------------------------------------------------------------------------- 8
Coaxial cables. Waveguides--------------------------------------------------------------------------------------------------- 8
Wires and symmtrical cables-------------------------------------------------------------------------------------------------- 9
Aerials-------------------------------------------------------------------------------------------------------------------------------- 9
Audio, Video and Audiovisual engineering--------------------------------------------------------------------------------- 9
INFORMATION TECHNOLOGY. OFFICE EQUIPMENT
Information technology in general-------------------------------------------------------------------------------------------- 10
Character sets and information coding------------------------------------------------------------------------------------- 11
Languages used in information technology------------------------------------------------------------------------------- 16
Software development and system documentation--------------------------------------------------------------------- 18
Open Systems Interconnection (OSI)---------------------------------------------------------------------------------------- 20
Physical layer----------------------------------------------------------------------------------------------------------------------- 27
Data link layer--------------------- ------------------------------------------------------------------------------------------------- 28
Network layer----------------------------------------------------------------------------------------------------------------------- 29
Transport layer--------------------------------------------------------------------------------------------------------------------- 30
Presentation layer ---------------------------------------------------------------------------------------------------------------- 30
Application layer------------------------------------------------------------------------------------------------------------------- 31
Local Area Network--------------------------------------------------------------------------------------------------------------- 34
Networking -------------------------------------------------------------------------------------------------------------------------- 35
Computer graphics------------------------------ --------------------------------------------------------------------------------- 35
Microprocessor systems-------------------------------------------------------------------------------------------------------- 38
IT terminal and other peripheral equipment------------------------------------------------------------------------------- 39
Interface and interconnection equipment---------------------------------------------------------------------------------- 39
Data storage devices in general---------------------------------------------------------------------------------------------- 40
Identification cards and related devices------------------------------------------------------------------------------------ 40
Magnetic storage devices in general---------------------------------------------------------------------------------------- 40
Optical storage devices---------------------------------------------------------------------------------------------------------- 43
Applications of information technology-------------------------------------------------------------------------------------- 44
Identification cards and related devices------------------------------------------------------------------------------------ 44
IT applications in office work--------------------------------------------------------------------------------------------------- 45
IT applications in information, documentation and publishing------------------------------------------------------- 47
IT applications in banking------------------------------------------------------------------------------------------------------- 48
IT application in industry--------------------------------------------------------------------------------------------------------- 51
IT application in in transport and trade-------------------------------------------------------------------------------------- 51
IT applications in science------------------------------------------------------------------------------------------------------- 51
Office machines------------------------------------------------------------------------------------------------------------------- 52
(v)
1
33. TELECOMMUNICATIONS AUDIO & VIDEO ENGINEERING
BEST SELLER
33.020 Telecommunications in general
33.040 Telecommunication systems
MS 1902: 2006
Broadband over powerline (BPL) physical network layer.
Price RM30
MS 1903: 2006
Next generation network (NGN) realisation.
Price RM50
MS ISO/IEC 15444-1 : 2003
Information technology – JPEG 2000 image coding system –
Part 1: Core coding system
This Malaysian Standard specifies the signaling protocol for the
support of the Wireless Terminal Authentication Supplementary
Services (SS-WTAT and SS-WTAN) at the Q reference point between
Private Integrated Services Network Exchanges (PINXs) connected
together within a Private Integrated Services Network (PISN).
Price RM270
33.040.35 Telephone networks
MS ISO/IEC 15428 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Specification, functional model and information flows
– Wireless Terminal Location Registration Supplementary
Service and Wireless Terminal Information Exchange Additional
Network Feature
This Malaysian Standard specifies the Wireless Terminal Location
Registration Supplementary Service (SS-WTLR) and the Wireless
Terminal Information Exchange Additional Network Feature (ANF-
WTINFO), which are applicable to various basic services supported
by Private Integrated Services Networks (PISN).
Price RM40
MS ISO/IEC 15429 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Inter-exchange signalling protocol – Wireless Terminal
Location Registration Supplementary Service and Wireless
Terminal Information Exchange Additional Network Feature
This Malaysian Standard specifies the signaling protocol for the
support of the Wireless Terminal Location Registration Supplementary
Service (SS-WTLR) and the Wireless Terminal Information Exchange
Additional Network Feature (ANF-WTINFO) at the Q reference point
between Private Integrated Services Network Exchanges (PINXs)
connected together within a Private Integrated Services Network
(PISN).
Price RM60
MS ISO/IEC 15430 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Specification, functional model and information flows
– Wireless terminal call handling additional network features
This Malaysian Standard specifies the wireless terminal call handling
additional network features (ANF-WTMI, ANF-WTMO), which are
applicable to various basic services supported by Private Integrated
Services Networks (PISNs). Basic services are specified in ISO/IEC
11574.
Price RM50
MS ISO/IEC 15431 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Inter-exchange signalling protocol – Wireless terminal
call handling additional network features
This Malaysian Standard specifies the signaling protocol for the
support of the Wireless terminal call handling additional network
features (ANF-WTMI and ANF-WTMO) at the Q reference point
between Private Integrated Services Network Exchanges (PINX)
connected together within a Private Integrated Services Network
(PISN).
Price RM60
MS ISO/IEC 15432 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Specification, functional model and information flows
– Wireless terminal call handling additional network features
This Malaysian Standard specifies the authentication supplementary
services, which are applicable to various basic services supported
by Private Integrated Services Networks (PISNs). Basic services are
specified in MS ISO/IEC 11574.
Price RM50
MS ISO/IEC 15433 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Inter-exchange signalling protocol – Wireless
Terminal Authentication Supplementary Services
This Malaysian Standard specifies the signaling protocol for the
support of the Wireless Terminal Authentication Supplementary
Services (SS-WTAT and SS-WTAN) at the Q reference point between
Private Integrated Services Network Exchanges (PINXs) connected
together within a Private Integrated Services Network (PISN). Price:
RM 60
MS ISO/IEC 20161 : 2003
Information technology – Telecommunications and information
exchange between systems – Private Integrated Services
Network – Use of QSIG at the C reference point between a PINX
and an interconnecting network
2
This Malaysian Standard specifies the combination of base standards,
together with the selection of appropriate options and parameter
values, necessary to specify how QSIG/PSS1 can be used to provide
digital signalling capabilities at interfaces at the C reference point
between a Private Integrated Services Network Exchange (PINX)
and an Interconnecting Network (ICN) to permit interoperability
between equipment from different vendors and different public or
private service providers.
Price RM30
33.040.99 Other equipment for
telecommunication system
MS IEC 61643-311 : 2004
Components for low-voltage surge protective devices – Part 311
: Specification for gas discharge tubes
(GDT)
Gas discharge tubes (GDTs) are used for applications up to 1 000 V
a.c or 1 500 V d.c. in communication or signalling circuits. They are
defined as a gap, or series of gaps, in an enclosed discharge medium
other than air. They are designed to protect apparatus or personnel,
or both, from high transient voltage. This standard does not specify
requirements applicable to complete surge protective devices, nor
does it specify total requirements for GDTs employed within
electronics devices, where precise coordination between GDT
performance and surge protective device withstand capability is highly
critical.
Price RM30
MS IEC 61643-321 : 2004
Component for low-voltage surge protective devices – Part 321
: Specification for avalanche breakdown diode (ABD)
This part of IEC 61643 is applicable to avalanche breakdown diodes
(ABDs) which represent one type surge protective device component
(hereinafter referred to as SPDC) used in the design and construction
of surge protective devices connected to low-voltage power
distribution systems, transmission, and signalling networks. Test
specifications in this standard are for single ABDs consisting of two
terminals. However, multiple ABDs may be assembled within a single
package defined as a diode array. Each diode within the array can
be tested to this specification.
Price RM30
33.080 Integrated Services Digital Network (ISDN)
MS 1074 : 1992
Code of practice for the exchange of digital feature coded
mapping data.
Specifies requirement for the exchange of graphic map and chart
data which is simple, not machine or system dependent and has the
maximum likelihood of being implemented at any computer
installation. Include rules for recording data, description of feature
codes, records, labels, medium for exchange and the preferred datum
and projections.
Price RM70
33.100 Electromagnetic compatibility
(EMC)
MS CISPR 21 : 2002
Intereference to mobile radiocommunications in the presence
of impulsive noise - Methods of judging degradation and
measures to improve performance.
This Malaysian Standard provides methods of judging the degradation
of radio communication in the presence of impulsive noise and
recommends ways of improving radio performance.
Price RM20
MS CISPR 23 : 2002
Determination of limits for industrial, scientific and medical
equipment.
This Malaysian Standard is to review the position of C.I.S.P.R. limits
for the protection of telecommunications from interference from ISM
equipment, to clarify the roles of the CCIR and the C.I.S.P.R. in their
collaboration in studies on the limits required for this purpose, to
summarise the various proposals for methods for specifying limits
and to derive from these a recommended method which will meet
the objectives of C.I.S.P.R and CCIR. This standard deals only with
radiation which occurs outside the bands designated by ITU for ISM
use and does not include consideration of data-processing equipment.
Price RM20
MS CISPR 24 : 2000
Information technology equipment – Immunity characteristics
– Limits and methods of measurement
Applies to information technology equipment (ITE) as defined in
CISPR 22. Procedures are defined for the measurement of ITE and
limits are specified which are developed for ITE and within the
frequency range from O Hz to 400 GHz. The object of this standard
is to establish requirements which will provide an adequate level of
intrinsic immunity do that the equipment will operate as intended in
its environment. This standard is identical with CISPR 24 : 1997.
Price RM40
33.100.01 Electromagnetic compatibility in
general
MS 71 : 1972
Specification for radio interference limits for electrical
appliances.
Specifies limits of magnitude of radio-noise voltage in frequency range
0.15 Mhz - 3.0 Mhz, and radio-noise fields in the frequency ranges
0.2 Mhz - 1.605 Mhz and 40 Mhz - 300 Mhz. Applies only to equipment
which are directly connected to a distribution system having a declared
voltage between conductors not greater than 500 volts, or a declared
voltage between one conductor and earth not greater than 250 volts.
Price RM20
MS 73 : 1972
Specification for radio interference measuring set for the
frequency range 0.015 MHz to 1000 MHz.
Three types of measuring sets are covered, namely quasi-peak
measuring set, peak measuring and sine-wave measuring set. These
are apparatus used to measure radio-noise voltages and fields
produced by electric equipment of all kinds in the frequency range
0.015 MHz - 1000 MHz.
Price RM40
MS 399 : 1976
Specification for radio interference limits for the electrical
ignition systems of internal combustion engines.
Provides protection for the reception of sound and television signals
in the frequency range of 40 Mhz and limits of radiation for the ignition
systems on internal combustion engines. Methods of measurement
provided.
Price RM30
3
MS 588 : 1979
Specification for radio interference suppression on marine
installations.
Specifies limits and methods of measurement for electromagnetic
interference by electrical and electronic equipment of a marine
installation. Applies only to interference which is generated in the
ship.
Price RM30
MS 1760 : 2004
Guide on voltage dips and short interruptions on public electric
power supply systems.
This Malaysian Standard describes the electromagnetic disturbance
phenomena of voltage dips and short interruptions in terms of their
sources, effects, remedial measures, methods of measurement, and
measurement.
Price RM60
MS CISPR 17 : 2003
Methods of measurement of the suppression characteristics
of passive radio interference filters and
suppression components.
This MS C.l.S.P.R. publication prescribes methods of measurement
of insertion loss of passive radio-frequency suppression filters, which
may consist of single elements, such as capacitors, inductors or
resistors, or combinations of inductors, capacitors and resistors of
either the lumped or distributed types. The methods include those
for use in a laboratory or on a production line, utilizing fixed impedance
terminations or ‘worst case” terminations, those to be used in situ or
in model installations, and provide for voltage and current loading.
Price RM40
MS CISPR 18-1 : 2003
Radio interference characteristics of overhead power lines
and high-voltage equipment – Part 1 : Description of
phenomena.
This Malaysian Standard applies to radio noise from overhead power
lines and high-voltage equipment which may cause interference to
radio reception, excluding the fields from power line carrier signals.
The frequency range covered is 0.15 MHz to 300 MHz.
Price RM70
MS CISPR 18-2 : 2003
Radio interference characteristics of overhead power lines
and high-voltage equipment – Part 2 : Methods of
measurement and procedure for determining limits.
This publication applies to radio noise from overhead power lines
and high-voltage equipment which may cause interference to radio
reception, excluding the fields from power line carrier signals. The
frequency range covered is 0.15 MHz to 300 MHz. The general
procedure for establishing the limits of the radio noise field from the
power lines and equipment is given, together with typical values as
examples, and methods of measurement.
Price RM100
MS CISPR 18-3 : 2003
Radio interference characteristics of overhead power lines
and high-voltage equipment – Part 3 : Code of
practice for minimizing the generation of radio noise.
This Malaysian Standard applies to radio noise from overhead power
lines and high-voltage equipment which may cause interference to
radio reception, excluding the fields from power line carrier signals.
The frequency range covered is 0.15 MHz to 300 MHz.
Price RM50
MS IEC 60050-551-20 : 2003
International electrotechnical vocabulary: Part 551
20: Power electronics – Harmonic analysis
This Malaysian Standard is identical with IEC 60050-551-20:2001.
This Malaysian Standard specifies terms and vocabulary related to
power electronics in harmonic analysis.
Price RM30
MS IEC 60601-1-2 : 2002
Medical electrical equipment - Part 1 : General requirements
for safety 2. Collateral standard: Electromagnetic compatibility
- Requirements and tests. Section 1: General.
This Malaysian Standard applies only to medical electrical equipment,
medical electrical systems, information technology equipment used
in medical electrical application, and all other equipment forming part
of medical electrical systems,, hereinafter referred to as equipment
and/or system(s).
Price RM20
MS IEC 61000-2-2 : 2005
Electromagnetic compatibility (EMC) – Part 2-2 : Environment –
Compatibility levels for low-frequency conducted disturbances
and signaling in public low-voltage power supply systems (First
revision)
This Malaysian Standard is concerned with conducted disturbances
in the frequency range from 0 kHz to 9 kHz with an extension up to
148,5 kHz specifically for mains signalling systems. It gives
compatibility levels for public low voltage a.c distribution systems
having a nominal voltage up to 420 V, single-phase or 690 V, three-
phase and a nominal frequency of 50 Hz or 60 Hz.
Price RM40
MS IEC 61000-2-4 : 2005
Electromagnetic compatibility (EMC) – Part 2-4 : Environment –
Compatibility levels for industrial plants for low-frequency
conducted disturbances (First revision)
This Malaysian Standard is concerned with conducted disturbances
in the frequency range from 0 kHz to 9 kHz. It gives numerical
compatibility levels for industrial and non-public power distribution
systems at nominal voltage up to 35 kV and a nominal frequency of
50 Hz or 60 Hz. Power supply systems on ships, aircraft, offshore
platforms and railways are not included.
Price RM50
MS IEC 61000-2-9 : 2001
Electromagnetic compatibility (EMC) Part 2: Environment :
Section 9 : Description of HEMP environment - Radiated
disturbance - Basic EMC publication
This Malaysian Standard defines the high-altitude electromagnetic
pulse (HEMP) environment that is one of the consequences of a
high-altitude nuclear explosion. Those dealing with this subject
consider two cases:
- high-altitude nuclear explosions;
- low-altitude nuclear explosions.
Price RM40
MS IEC 61000-2-10 : 2002
Electromagnetic compatibility (EMC) Part 2-10 : Environment -
Description of HEMP environment - Conducted disturbance
This Malaysian Standard defines the high-altitude electromagnetic
pulse (HEMP) conducted environment that is one of the
consequences of a high-altitude nuclear explosion. Those dealing
with this subject consider two cases:
- high-altitude nuclear explosions;
- low-altitude nuclear explosions.
Price RM50
MS IEC 61000-2-12 : 2003
Electromagnetic compatibility (EMC)-Part 2-12: Environment-
Compatibility levels for low-frequency conducted disturbances
and signalling in public medium-voltage power supply systems
This part of MS IEC 61000 is concerned with conducted disturbances
4
in the frequency range from 0 kHz to 9 kHz, with an extension up to
148.5 kHz specifically for mains signalling systems. It gives
compatibility levels for public medium voltage a.c. distribution systems
having a nominal voltage between 1 kV and 35 kV and a nominal
voltage between 1 kV and 35 kV and a nominal frequency of 50 Hz
or 60 Hz.
Price RM40
MS IEC 61000-3-2 : 2003
Electromagnetic compatibility (EMC) – Limits for harmonic
current emissions (equipment input current = 16 A per phase)
(First revision).
This Malaysian Standard is identical with IE C 61000-3-2 : 2001.
This Malaysian Standard specifies the limitation of harmonic currents
injected into the public supply system and applicable to electrical
and electronic equipment having an input current up to and including
16 A per phase, and intended to be connected to public low-voltage
distribution systems. For systems with nominal voltage less than 250
V (line-to neutral), the limits have not yet been considered. This
Malaysian Standard cancels and replaces MS IEC 61000-3-2 : 2000.
Price RM40
MS IEC 61000-3-6 : 2001
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 6
: Assessment of emission limits for distorting loads in MV and
HV power systems - Basic EMC publication.
This technical report outlines principles which are intended to be
used as the basis for determining the requirements for connecting
large distorting loads (producing harmonics and/or interharmonics)
to public power systems. The primary objective is to provide guidance
for engineering practices which will ensure adequate service quality
for all connected consumers.
Price RM70
MS IEC 61000-3-7 : 2001
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 7
: Assessment of emission limits for fluctuating loads in.
This technical report outlines principles which are intended to be
used as the basis for determining the requirements for connecting
large fluctuating loads (producing flicker) to public power systems.
The primary objective is to provide guidance for engineering practices
which will ensure adequate service quality for all connected
consumers. Since the guidelines outlined in this report are necessarily
based on certain simplifying assumptions, there is no guarantee that
this approach will always provide the optimum solution for all flicker
problems. Price: RM50
MS IEC 61000-3-8 : 2001
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 8
: Signalling on low-voltage electrical installations - Emission
levels, frequency bands and electromagnetic disturbance levels.
This section of MS IEC 61000-3 applies to electrical equipment using
signals in the frequency range from 3 kHz up to 525 kHz to transmit
information on low-voltage electrical installations, either on the public
supply system or within customers’ premises. It specifies frequency
bands allocated to different applications (where appropriate), limits
for the thermal output voltage in the operating band and limits for
conducted and radiated disturbance. It also gives the methods of
measurement. It also gives the methods of measurement. It specifies
disturbance limits in the frequency range from 3 kHz up to 400 GHz.
Price: RM30
MS IEC 61000-4-1 : 2002
Electromagnetic compatibility (EMC) Part 4 : Testing and
measurement techniques : Section 1 : Overview of immunity
tests. Basic EMC publication.
This Malaysian Standard is a basic EMC (electromagnetic
compatibility) publication. It considers immunity tests for electric and/
or electronic equipment (apparatus and systems) in its
electromagnetic environment. Both conducted and radiated
phenomena are considered, this includes immunity tests for
equipment connected to power, control and communication networks.
Price RM80
MS IEC 61000-4-7 : 2003
Electromagnetic compatibility (EMC). Part 4-7 : Testing and
measurement techniques-General guide on harmonics and inter
harmonics measurements and instrumentation, for power
supply systems and equipment connected thereto This part of
MS IEC 61000 is applicable to instrumentation intended for measuring
spectral components in the frequency range up to 9 kHz which are
superimposed on the fundamental of the power supply systems at
50 Hz and 60 Hz. For practical considerations, this standard
distinguishes between harmonics, inter harmonics and other
components above the harmonic frequency range, up to 9kHz.
Price RM50 Technical corrigendum 1
MS IEC 61000-4-9 : 2002
Electromagnetic compatibility (EMC) Part 4 : Testing and
measurement techniques : Section 9 : Pulse magnetic field
immunity test. Basic EMC publication
This Malaysian Standard relates to the immunity requirements of
equipment, only under operational conditions, to pulse magnetic
disturbances mainly related to: industrial installations and power
plants; - medium voltage and high voltage sub-stations. The
applicability of this standard to equipment installed in different
locations is determined by the presence of the phenomenon, as
specified in Clause 3. This standard does not consider disturbances
due to capacitive or inductive coupling in cables or other parts of the
field installation.
Price RM40
MS IEC 61000-4-15 : 2003
Electromagnetic compatibility (EMC)- Part 4: Testing and
measurement techniques-Section 15: Flickermeter-Functional
and design specifications
This section of MS IEC 61000-4 gives a functional and design
specification for flicker measuring apparatus intended to indicate the
correct flicker perception level for all practical voltage fluctuation
waveforms. Information is presented to enable such an instrument
to be constructed. A method is given for the evaluation of flickers
severity on the basis of the output of flickemeters complying with this
standard.
Price RM40
MS IEC 61000-4-24 : 2002
Electromagnetic compatibility (EMC) Part 4 : Testing and
measurement techniques : Section 24: Test methods for
protective devices for HEMP conducted disturbance. Basic EMC
publication.
This Malaysian Standard deals with methods for testing protective
devices for HEMP conducted disturbance. It primarily covers testng
of voltage breakdown and voltage-limiting characteristics but also
methods to measure the residual voltage under HEMP conditions
for the case of very fast changes of voltage (u) and current (I) as a
function of time.
Price RM20
5
MS IEC 61000-5-5 : 2002
Electromagnetic compatibility (EMC) Part 5 : Installation and
mitigation guidelines : Section 5 : Specification of protec
tive devices for HEMP conducted disturbance - Basic EMC
publication.
This Malaysian Standard defines how protective devices for
conducted disturbance proposed for HEMP protection shall be
specified. It is intended to be used for the harmonization of existing
or future specifications issued by protective device manufacturers,
electronic equipment manufacturers, administrations and other
ultimate buyers. tive devices for HEMP conducted disturbance - Basic
EMC publication.
Price RM40
MS IEC 61000-6-2 : 2001
Electromagnetic compatibility (EMC) - Part 6-2 : Generic
standards - Immunity for industrial environments
This part of MS IEC 61000 for EMC immunity requirements applies
to electrical and electronic apparatus intended for use in industrial
environments, as described below, for which no dedicated product
or product-family immunity standard exists. Immunity requirements
in the frequency range 0 Hz to 400 GHz are covered. No tests need
to be performed at frequencies where no requirements are specified.
Price: RM20
MS IEC 61326-1 : 2002
Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1 : General requirements.
This Malaysian Standard specifies minimum requirements for
immunity and emissions regarding electromagnetic compatibility
(EMC) for electrical equipment, operating from a supply of less than
1 000V a.c. or 1 500 V d.c., intended for professional, industrial,
industrial process and educational use, including equipment and
computing devices for: - measurement and test; - control; - laboratory
use; - accessories intended for use with the above (such as simple
handling equipment), intended to be used in industrial and non-
industrial locations.
Price RM40
MS IEC 61547 : 2002
Equipment for general lighting purposes - EMC immunity
requirements
This Malaysian Standard for electromagnetic immunity requirements
applies to lighting equipment which is within the scope of IEC technical
committee 34, such as lamps, auxiliaries and luminaires, intended
either for connecting to a low voltage electricity supply or for battery
operation.
Price RM30
MS IEC 61800-3 : 2002
Adjustable speed electrical power drive systems - Part 3 : EMC
product standard including specific test methods.
This Malaysian Standard specifies electromagnetic compatibility
(EMC) requirements for power drive systems (PDSs). These are
adjustable speed a.c. or d.c. motor drives. Requirements are stated
for PDSs which are connected to mains supplies with a rated voltage
of up to 1 000 V a.c.r.m.s. For supply voltages higher than 1 000V
a.c.r.m.s. EMC requirements are under consideration and, until a
new publication is produced, they will result from agreement between
manufacturer/supplier and user.
Price RM100
MS IEC 62040-2 : 2002
Uninterruptible power systems (UPS) - Part 2 : Electromagnetic
compatibility (EMC) requirements.
This Malaysian Standard applies to single UPS units or UPS systems
comprising a number of interconnected UPS and associated control/
switchgear forming a single power system, intended to be installed
in any operator accessible area or in separated electrical locations,
connected to either industrial or public low voltage supply networks.
Price RM50
33.100.10 Emission
MS 1555 : 2002
Electromagnetic compatibility (EMC) – Limits – Limitation of
emission of harmonic currents in low-voltage power supply
systems for equipment with rated current greater than 16 A
This Malaysian Standard deals with the emission of disturbances
due to harmonics. Provisions of this standard are applicable to
electrical and electronic equipment with a rated input current
exceeding 16 A per phase and intended to be connected to public
low-voltage a.c. distribution systems of the following types:
a) nominal voltage up to 240 V, single-phase, two or three wires;
b) nominal voltage up to 600 V, three-phase, three or four wires;
and
c) nominal frequency 50 Hz or 60 Hz.
Price RM20
MS CISPR 11 : 2005
Industrial, scientific and medical (ISM) radio-frequency
equipment – Electromagnetic disturbance characteristics –
Limits and methods of measurement (First revision).
The limits and methods of measurement laid down in this standard
apply to industrial, scientific and medical equipment as defined in
clause 2 and to electro-discharge machining (EDM) and arc welding
equipment.
Price RM50
MS CISPR 12 : 2005
Vehicles, boats and internal combustion engine driven devices
– Radio disturbance characteristics – Limits and methods of
measurement for the protection of receivers except those
installed in the vehicle/boat/device itself or in adjacent vehicles/
boats/devices (First revision).
The limits in this Malaysian Standard are designed to provide
protection for broadcast receivers in the frequency range of 30 MHz
to 1000 MHz when used in the residential environment. Compliance
with this standard may not provide adequate protection for new types
of radio transmissions or receivers used in the residential environment
nearer than 10 m to the vehicle or device.
Price RM60
MS CISPR 13 : 2005
Sound and television broadcast receivers and associated
equipment – Radio disturbance characteristics – Limits and
methods of measurement (First revision).
This Malaysian Standard applies to the generation of electromagnetic
energy from sound and television receivers for the reception of
broadcast and similar transmission and from associated equipment.
The frequency range covered extends from 9 kHz to 400 GHz. Price
RM50
6
MS CISPR 14-1 : 2005
Electromagnetic compatibility – Requirements for household
appliances, electric tools and similar apparatus – Part 1 :
Emission (First revision).
This Malaysian Standard applies to the conduction and the radiation
of radio-frequency disturbances from appliances whose main
functions are performed by motors and switching or regulating
devices, unless the r.f energy is intentionally generated or intended
for illumination. Price RM80
MS CISPR 14-2 : 2005
Electromagnetic compatibility – Requirements for household
appliances, electric tools and similar apparatus – Part 2 :
Immunity – Product family standard (First revision)
This Malaysian standard deals with the electromagnetic immunity of
appliances and similar apparatus for household and similar purposes
that use electricity, as well as electric toys and electric tools, the
rated voltage of the apparatus being not more than 250 V for single-
phase apparatus to be connected to phase and neutral and 480 V
for other appliances.
Price RM30
MS CISPR 15 : 2005
Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment (First
revision).
This Malaysian Standard applies to the emission (radiated and
conducted) of radio frequency disturbances from – all lighting
equipment with a primary function of generating and/or distributing
light intended for illumination purposes and intended either for
connection to the low voltage electricity supply or for battery
operation; the lighting part of multi-function equipment where one of
the primary functions of this is illumination; independent auxiliaries
exclusively for use with lighting equipment; UV and IR radiation
equipment; neon advertising equipment; street/flood lighting intended
for outdoor use; transport lighting (installed in buses and trains)
Price RM50
MS CISPR 16-1-1 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-1 : Radio disturbance and
immunity measuring apparatus – Measuring apparatus.
This standard is designated a basic standard, which specifies the
characteristics and performance of equipment for the measurement
of radio disturbance voltages, currents and fields in the frequency
range 9 kHz to 18 GHz. In addition, requirements are specified for
specialized equipment for discontinuous disturbance measurements.
The requirements include the measurement of broadband and
narrowband types of radio disturbance.
Price RM 70
MS CISPR 16-1-2 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-2 : Radio disturbance and
immunity measuring apparatus – Ancillary equipment –
Conducted disturbances
This standard is designated a basic standard, which specifies the
characteristics and performance of equipment for the measurement
of radio disturbance voltages and currents in the frequency range 9
kHz to 1 GHz.
Price RM70
MS CISPR 16-1-3 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-3 : Radio disturbance and
immunity measuring apparatus and methods – Part 1-4 : Radio
disturbance and immunity measuring apparatus – Ancillary
equipment – Disturbance power.
This standard is designated a basic standard, which specifies the
characteristics and calibration of the absorbing clamp for the
measurement of radio disturbance power in the frequency range 30
MHz to 1 GHz.
Price RM20
MS CISPR 16-1-4 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-4 : Radio disturbance and
immunity measuring apparatus and methods – Part 1-4 : Radio
disturbance and immunity measuring apparatus – Ancillary
equipment –Radiated disturbances.
This standard is designated a basic standard, which specifies the
characteristics and performance of equipment for the measurement
of radiated disturbances in the frequency range 9 kHz to 18 GHz.
Price RM80
MS CISPR 16-1-5 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 1-5 : Radio disturbance and
immunity measuring apparatus – Antenna calibration test sites
for 30 MHz to 1000 MHz.
This Malaysian Standard specifies the requirements for calibration
test sites, used to perform antenna calibrations, as well as the test
antenna characteristics, calibration site verification procedure and
site compliance criteria.
Price RM60
MS CISPR 16-2-1 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-1 : Methods of measurement
of disturbances and immunity – Conducted disturbance
measurements.
This Malaysian Standard specifies the methods of measurement of
disturbance phenomena I general in the frequency range 9 kHz to
18 GHz and especially of conducted disturbance phenomena in the
frequency range 9 kHz to 30 MHz.
Price RM70
MS CISPR 16-2-2 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-2 : Methods of measurement
of disturbances and immunity – Measurement of disturbance
power
This Malaysian Standard specifies the methods of measurement of
disturbance power using the absorbing clamp in the frequency range
30 MHz to 1000 MHz.
Price RM40
MS CISPR 16-2-3 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-3 : Methods of measurement
of disturbances and immunity – Radiated disturbance
measurements.
This Malaysian Standard specifies the methods of measurement of
radiated disturbance phenomena in the frequency range 9 kHz to
18 GHz.
Price RM70
MS CISPR 16-2-4 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-4 : Methods of measurement
of disturbances and immunity – Immunity measurements
This Malaysian Standard specifies the methods of measurement of
immunity to EMC phenomena in the frequency range 9 kHz to 18
GHz.
Price RM30
MS CISPR 16-4-2 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 4-2 : Uncertainties, statistics and
limit modeling – Uncertainty in EMC measurement
This Malaysian Standard specifies the manner in which measurement
uncertainty is to be taken in to account in determining with CISPR
limits. The material is also relevant to any EMC test when
interpretation of the results and conclusions reached will be impacted
by the uncertainty of the instrumentation used during the testing.
Price RM30
7
MS CISPR 22 : 2005
Information technology equipment – Radio disturbance
characteristics – Limits and methods of measurement (First
revision)
This Malaysian Standard specifies the measurement of the levels of
spurious signals generated by the ITE and limits are specified for the
frequency range 9 kHz to 400 GHz for both class A and class B
equipment.
Price RM80
MS CISPR 25 : 2005
Radio disturbance characteristics for the protection of receivers
used on board vehicles, boats and on devices – Limits and
methods of measurement (First revision)
This Malaysian Standard contains limits and procedures for the
measurement of radio disturbances in the frequency range of 150
kHz to 1000 MHz. Thestandard applies to any electronic/electrical
components intended for use in vehicles and devices.
Price RM70
MS IEC 61000-3-3 : 2005
Electromagnetic compatibility (EMC) – Part 3-3 : Limits –
Limitation of voltage changes, voltage fluctuations and flickers
in public low-voltage supply systems, for equipment with rated
current _<16 A per phase and not subject to conditional
connection (First revision)
This Malaysian Standard is concerned with the limitation of voltage
fluctuations and flickers impressed on the public low-voltage system.
It specifies limits of voltage changes which may be produced by an
equipment tested under specified conditions and gives guidance on
methods of assessment.
Price RM40
MS IEC 61000-3-11 : 2005
Electromagnetic compatibility (EMC) – Part 3-11 : Limit –
Limitation of voltage changes, voltages fluctuations and flicker
in public low-voltage supply systems – Equipment with rated
current _< 75 A and subject to conditional connection
This Malaysian Standard is connected with the emission of voltage
changes, voltage fluctuations and flicker produced by equipment and
impressed on the public low-voltage supply system. It specifies the
limits of voltage changes produced by equipment tested under
specified conditions.
Price RM20
33.100.20 Immunity
MS CISPR 16-1 : 2001
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1 : Radio disturbance and
immunity measuring apparatus (First revision)
This part of MS CISPR 16 is designated a basic standard, which
specifies the characteristics and performance of equipment for the
measurement of radio disturbance voltages, currents and fields in
the frequency range 9 kHz to 18 GHz. In addition, requirements are
specified for specialized equipment for discontinuous disturbance
measurements. The requirements include the measurement of
broadband and narrowband types of radio disturbance. This standard
supersedes MS CISPR 16-1 : 2000.
Price RM210
MS CISPR 16-2 : 2002
Specification for radio disturbance and immunity measuring
apparatus and methods : Part 2 : Methods of measurement of
disturbances and immunity : Section 1 : General
This Malaysian Standard specifies the methods of measurement of
EMC phenomena in the frequency range 9 kHz to 18 GHz.
Price RM90
MS CISPR 16-2-3 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-3 :
Methods of measurement of disturbances and immunity – Radiated
disturbance measurements.
This Malaysian Standard specifies the methods of measurement of
radiated disturbance phenomena in the frequency range 9 kHz to 18
GHz.
Price RM70
MS CISPR 16-2-4 : 2005
Specification for radio disturbance and immunity measuring
apparatus and methods – Part 2-4 : Methods of measurement of
disturbances and immunity – Immunity measurements
This Malaysian Standard specifies the methods of measurement of
immunity to EMC phenomena in the frequency range 9 kHz to 18
GHz.
Price RM30
MS CISPR 20 : 2005
Sound and television broadcast receives and associated
equipment – Immunity characteristics – Limits and methods of
measurement (First revision)
This Malaysian Standard is for immunity requirements applies to
television broadcast receivers, sound broadcast receivers and
associated equipment intended for use in the residential, commercial
and light industrial environment. This Standard describes the methods
of measurement and specified limits applicable to sound and
television receivers and to associated equipment with regard to their
immunity characteristics to disturbing signals.
Price RM90
MS CISPR 25 : 2005
Radio disturbance characteristics for the protection of receivers
used on board vehicles, boats and on devices – Limits and
methods of measurement (First revision).
This Malaysian Standard contains limits and procedures for the
measurement of radio disturbances in the frequency range of 150
kHz to 1000 MHz. The standard applies to any electronic/electrical
components intended for use in vehicles and devices.
Price: RM70
MS IEC 61000-2-2 : 2005
Electromagnetic compatibility (EMC) – Part 2-2 : Environment –
Compatibility levels for low-frequency conducted disturbances
and signaling in public low-voltage power supply systems (First
revision).
This Malaysian Standard is concerned with conducted disturbances
in the frequency range from 0 kHz to 9 kHz with an extension up to
148.5 kHz specifically for mains signaling systems. It gives
compatibility levels for public low voltage a.c distribution systems
having a nominal voltage up to 420 V, single-phase or 690 V, three-
phase and a nominal frequency of 50 Hz or 60 Hz.
Price RM40
MS IEC 61000-2-4 : 2005
Electromagnetic compatibility (EMC) – Part 2-4 : Environment –
Compatibility levels in industrial plants for low-frequency
conducted disturbances (First revision).
This Malaysian Standard is concerned with disturbances in the
frequency range from 0 kHz to 9 kHz. It gives numerical compatibility
levels for industrial and non-public power distribution systems at
nominal voltages up to 35 kV and a nominal frequency of 50 Hz or
60 Hz. Price RM50
8
33.100.99 Other aspects related to EMC
MS IEC 61000-4-30 : 2004
Electromagnetic compatibility (EMC) – Part 4-30 : Testing and
measurement techniques – Power quality measurement
methods
This Part of IEC 61000-4 defines the methods for measurement and
interpretation of result for power quality parameters in 50/60 Hz a.c.
power supply systems. Price RM50
33.120 Components and accessories for
telecommunications equipment
MS 2100 : 2006
Electric cable and wire : 600/1000 (Um=1200) V single core PVC
insulated cable - Non-armoured.
Price RM20
MS 2101 : 2006
Electric cable and wire : 600/1000 (Um=1200) V single core PVC
insulated cable - Armoured.
Price RM20
MS 2102 : 2006
Electric cable and wire : 600/1000 (Um=1200) V multi core PVC
insulated cable - Non-armoured.
Price RM20
MS 2103 : 2006
Electric cable and wire : 600/1000 (Um=1200) V multi core PVC
insulated cable - Armoured.
Price RM20
MS 2104 : 2006
Electric cable and wire : 600/1000 (Um=1200) V single core XPLE
insulated cable - Non-armoured.
Price RM20
33.120.10 Coaxial cables. Waveguides
MS 765 : 1982
Recommendation for characteristics impedances and
dimensions of radio-frequency coaxial cable.
Details on rated characteristics impedance and associated
dimensions over the dielectric for coaxial and flexible twin cables.
Price RM10
MS IEC 61000-4-2 : 2006
Electromagnetic compatibility (EMC) - Part 4-2 : Testing and
measurement techniques - Electrostatic discharge immunity test
(First revision).
Price RM50
MS IEC 61000-4-3 : 2006
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and
measurement techniques - Radiated, radio frequency,
electromagnetic field immunity test (First revision).
Price RM60
MS IEC 61000-4-5 : 2006
Electromagnetic compatibility (EMC) - Part 4-5 : Testing and
measurement techniques - Surge immunity test (First revision).
Price RM50
MS IEC 61000-4-6 : 2006
Electromagnetic compatibility (EMC) - Part 4-6 : Testing and
measurement techniques - Immunity to conducted disturbances,
induced by radio-frequency fields (First revision).
Price RM60
MS IEC 61000-4-10 : 2006
Electromagnetic compatibility (EMC) - Part 4-10 : Testing and
measurement techniques - Damped oscillatory magnetic field
immunity test (First revision).
Price RM40
MS IEC 61000-4-11 : 2005
Electromagnetic compatibility (EMC) - Part 4-11 : Testing and
measurement method – Voltage dips, short interruption and
voltage variations immunity tests (First revision).
This Malaysian Standard defines the immunity test methods and
range of preferred test levels for electrical and electronics equipment
connected to low-voltage power supply networks for voltage dips,
short interruptions and voltage variations.
Price RM30
MS IEC 61000-4-12 : 2006
Electromagnetic compatibility (EMC) - Part 4-12 : Testing and
measurement techniques - Oscillatory waves immunity test (First
revision).
Price RM40
MS IEC 61000-4-14 : 2003
Electrotechnical compatibility (EMC) – Part 4-14 : Testing and
measurement techniques – Voltage fluctuation immunity test.
This Malaysian Standard is identical with IEC 61000-4-14 : 1999.
This Malaysian Standard specifies the basic considerations of
immunity tests for electrical and/or electronic equipment in their
electromagnetic environment, including immunity tests for equipment
connected to public and industrial power supply networks.
Price RM20
MS IEC 61000-4-34 : 2006
Electrotechnical compatibility (EMC) – Part 4-34 : Testing and
measurement techniques – Voltage dips, short interruptions and
voltage variations immunity tests for equipment with input
current more than 16 A per phase.
Price RM300
Coaxial Cable
9
MS 861 : Part 1 : 1983
Specification for radio-frequency communication cables : Part
1 : General requirements and measuring methods.
Specifies flexible or semi flexible radio frequency cables of coaxial
or twin conductor types. Establishes uniform requirements for judging
electrical, climatic and mechanical properties and test methods.
Price RM50
33.120.20 Wires and symmetrical cables
MS 798 : 1982
Guide to the calculation of resistance of plain and tinned copper
conductors of low-frequency cables and wires.
Specifies low frequency cables and wires for telecommunications
and also include a general method for calculating the resistance of
the copper conductors.
Price RM10
33.120.40 Aerials
MS 839 : 1983
Code of practice for the reception of sound and television
broadcasting.
Covers recommendations on the aerial systems and wired distribution
systems, the necessary structural accommodation for equipment and
wiring, protective measures against danger from electric shock, fire
and other hazards. Includes general guidance on choice of an
appropriate class of sound and television receivers for particular
requirements and application.
Price RM40
MS 943 : 1984
Specification for electrical safety requirements for room aerials.
Specifies general, constructional, insulation and mechanical strength
requirements related with electrical safety only.
Price RM10
33.160 Audio, Video and Audiovisual
Engineering
MS IEC 60065 : 2003
Audio, video and similar electronic apparatus – Safety
requirements (First revision)
This Malaysian Standard is identical with IEC 60065 : 2001. This
Malaysian Standard applies to electronic apparatus designed to be
fed from the mains, from a supply apparatus, from batteries or from
remote power feeding and intended for reception, generation,
recording or reproduction respectively of audio, video and associated
signals. It also applies to apparatus designed to be used exclusively
in combination with the above-mentioned apparatus. This Malaysian
Standard primarily concerns apparatus intended for household and
similar general use but which may also be used in places of public
assembly such as schools, theatres, places of worships and the
workplace. Professional apparatus intended for use as described
above is also covered unless falling specifically within the scope of
other standards. This Malaysian Standard concerns only safety
aspects of the above apparatus; it does not concern other matters,
such as style or performance. This Malaysian Standard applies to
the above-mentioned apparatus, if designed to be connected to the
telecommunication network or similar network, for example by means
of an integrated modem. This Malaysian Standard cancels and
replaces MS IEC 60065 : 1997.
Price RM170
10
35.020 Information Technology (IT) in
general
MS 1140 : 1989
Specification for information processing flowchart symbols,
rules and conventions.
Specifies flowchart symbols, rules and conventions used in
Information Processing. This standard is also intended to be used
as guide to manufacturers in producing templates for flowchart
symbols.
Price RM40
MS ISO/IEC 2382-1 : 2005
Information technology – Vocabulary – Part 1 : Fundamental
terms
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM40
MS ISO/IEC 2382/II : 2005
Information technology – Vocabulary – Section 02 : Arithmetic
and logic operations
This Malaysian Standard is intended to facilitate international
communication in data processing. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
data processing and identifies relationships between the entries.
Price RM40
MS ISO/IEC 2382-3 : 2005
Information processing systems – Vocabulary – Part 03 :
Equipment technology
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM20
MS ISO/IEC 2382-4 : 2005
Information technology – Vocabulary – Part 4 : Organization of
data
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM30
MS ISO/IEC 2382-5 : 2005
Information technology – Vocabulary – Part 5 : Representation
of data
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM30
MS ISO 2382-6 : 2005
Information processing systems – Vocabulary – Part 06 :
Preparation and handling of data
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM20
MS ISO/IEC 2382-7 : 2005
Information technology – Vocabulary – Part 7 : Computer
programming
This Malaysian Standard is intended to facilitate international
communication in computer programming. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM90
MS ISO/IEC 2382-8 : 2005
Information technology – Vocabulary – Part 8 : Security
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM40
MS ISO/IEC 2382-9 : 2005
Information technology – Vocabulary – Part 9 : Data
communication
This Malaysian Standard is intended to facilitate international
communication in data communication. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
data communication and identifies relationships among the entries.
Price RM50
MS ISO/IEC 2382-14 : 2005
Information technology – Vocabulary – Part 14 : Reliability,
maintainability and availability
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationship
35. INFORMATION TECHNOLOGY. OFFICE EQUIPMENT
11
among the entries. In order to facilitate their translation into other
languages, the definitions are drafted so as to avoid, as far as
possible, any peculiarity attached to a language.
Price RM30
MS ISO/IEC 2382-16 : 2005
Information technology – Vocabulary – Part 16 : Information
theory
This Malaysian Standard is intended to facilitate international
communication in information theory. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
information theory and identifies relationships among the entries.
Price RM30
MS ISO/IEC 2382-17 : 2005
Information technology – Vocabulary – Part 17 : Databases
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM30
MS ISO/IEC 2382-18 : 2005
Information technology – Vocabulary – Part 18 : Distributed data
processing
This Malaysian Standard is intended to facilitate international
communication in data processing. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
information technology and identifies relationships among the entries.
Price RM30
MS ISO/IEC 2382-29 : 2005
Information technology – Vocabulary – Part 29 : Artificial
intelligence – Speech recognition and synthesis
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM30
MS ISO/IEC 2382-31 : 2005
Information technology – Vocabulary – Part 31 : Artificial
intelligence – Machine learning
This Malaysian Standard is intended to facilitate international
communication in artificial intelligence. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
information technology and identifies relationships among the entries.
Price RM30
MS ISO/IEC 2382-32 : 2005
Information technology – Vocabulary – Part 32 : Electronic mail
This Malaysian Standard is intended to facilitate international
communication in electronic mail. It presents, in two languages, terms
and definitions of selected concepts relevant to the field of information
technology and identifies relationships among the entries.
Price RM50
MS ISO/IEC 2382-34 : 2005
Information technology – Vocabulary – Part 34 : Artificial
intelligence – Neural networks
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries. Price RM30
35.040 Character sets and information
coding
MS 1134 : 1989
Method for representing SI and other units in information
processing systems with limited character sets.
Specifies two sets of representations, for SI units and other
internationally recognized units defined in ISO 1000 along with their
decimal multiples and sub-multiples formed by the use of prefixes
for use in data interchange by systems with limited graphic character
sets.
Price RM10
MS 1368 : 1994
Information processing - Jawi character set for information
interchange.
This Malaysian Standard specifies as a set of 164 graphic characters
identified as the Jawi/Latin alphabet and the coded representation of
each of these characters by means of a single 8-bit byte.
Price RM20
MS 1536 : Part 1 : 2002
Information technology - Guidelines for the management of IT
Security : Part 1 : Concepts and models for IT security
This Malaysian Standard contains guidance on the management IT
security. This part of MS 1536 presents the basic management
concepts and models which are essential for an introduction into the
management of IT security. These concepts and models are further
discussed and developed in the remaining parts to provide more
detailed guidance. Together, these parts can be used to help identify
and manage all aspects of IT security. This standard supersedes MS
ISO/IEC TR 13335-1 : 2001 (P).
Price RM30
MS 1536 : Part 2 : 2002
Information technology - Guidelines for the management of IT
Security : Part 2 : Managing and planning IT security
This Malaysian Standard addresses subjects essential to the
management of IT security, and the relationship between these
subjects. These guidelines are useful for the identification and the
management of all aspects of IT security. Familiarity with the concepts
and models introduced in Part 1 is essential for a complete
understanding of this part. This standard supersedes MS ISO/IEC
TR 13335-2 : 2001 (P).
Price RM30
MS 1536 : Part 3 : 2002
Information technology - Guidelines for the management of IT
Security : Part 3 : Techniques for the management of IT security
This Malaysian Standard provides techniques for the management
of IT security. The techniques are based on the general guidelines
laid out in MS 1536 : 1 and MS 1526 : Part 2. These guidelines are
designed to assist the implementation of IT security. Familiarity with
the concepts and models introduced in MS 1536 : Part 1 and the
material concerning the management and planning of IT security in
MS 1536 : Part 2 is important for a complete understanding of this
part . This standard supersedes MS ISO/IEC TR 13335-3 : 2001 (P).
Price RM70 remaining parts to provide more detailed guidance.
Together, these parts can be used to help identify and manage all
aspects of IT security. This standard supersedes MS ISO/IEC TR
13335-1 : 2001 (P).
Price RM30
IT SECURITY
12
MS 1536 : Part 2 : 2002
Information technology - Guidelines for the management of IT
Security : Part 2 : Managing and planning IT security
This Malaysian Standard addresses subjects essential to the
management of IT security, and the relationship between these
subjects. These guidelines are useful for the identification and the
management of all aspects of IT security. Familiarity with the concepts
and models introduced in Part 1 is essential for a complete
understanding of this part. This standard supersedes MS ISO/IEC
TR 13335-2 : 2001 (P).
Price RM30
MS 1536 : Part 3 : 2002
Information technology - Guidelines for the management of IT
Security : Part 3 : Techniques for the management of IT security
This Malaysian Standard provides techniques for the management
of IT security. The techniques are based on the general guidelines
laid out in MS 1536 : 1 and MS 1526 : Part 2. These guidelines are
designed to assist the implementation of IT security. Familiarity with
the concepts and models introduced in MS 1536 : Part 1 and the
material concerning the management and planning of IT security in
MS 1536 : Part 2 is important for a complete understanding of this
part . This standard supersedes MS ISO/IEC TR 13335-3 : 2001 (P).
Price RM70
MS 1536 : Part 4 : 2002
Information technology - Guidelines for the management of IT
Security : Part 4 : Selection of safeguards
This Malaysian Standard provides guidance on the selection of
safeguards, taking into account business needs and security
concerns. It describes a process for the selection of safeguards
according to security risks and concerns and the specific environment
of an organisation. It shows how to achieve appropriate protection,
and how this can be supported by the application of baseline security.
An explanation is provided on how the approach outlined in this Part
of MS 1536 supports the techniques for the management of IT security
laid out in MS 1536 : Part 2.
Price RM80
MS 1536 : Part 5 : 2004
Information technology – Guidelines for the management of IT
Security: Part 5: Management guidance on network security
MS 1536: Part 5 provides guideline with respect to network and
communications to those responsible for the management of IT
security. This guidance supports the identification and analysis of
the communications related factors that should be taken into account
to establish network security requirements. This part of MS 1536
builds upon Part 4 of this standard by providing an introduction on
how to identify appropriate safeguard areas with respect to security
associated with connections to communications networks. It is not
within the scope of this standard to provide advice on the detailed
and implementation aspects of the technical safeguard areas.
Price RM30
MS 1537 : 2004
Information security management – Specification for information
security management systems (First revision)
This standard specifies the requirements for establishing,
implementing, operating, monitoring, reviewing, maintaining and
improving a documented ISMS within the context of the organisation’s
overall business risks. It specifies requirements for the implementation
of security controls customised to the needs of individual
organisations or parts there of (see Annex 13 which provides
informative guidance on the use of this standard). The ISMS is
designed to ensure adequate and proportionate security controls that
adequately protect information assets and give confidence to
customers and other interested parties. This can be translated into
maintaining and improving competitive edge, cash flow, profitability,
legal compliance and commercial image.
Price RM60
MS ISO/IEC 646 : 1993
Information technology - ISO 7 - bit coded character set for
information interchange.
This Malaysian Standard specifies a set of 128 characters, (control
characters and graphic characters such as letters, digits and symbols)
with their coded representation. Most of these characters are
mandatory and unchangeable, but provision is made for some
flexibility to accommodate national and other requirements
Price RM30
MS ISO 1073 : Part 1 : 1993
Alphanumeric character sets for optical recognition : Part 1 :
Character sets OCR-A-shapes and dimensions of the printed
image.
This Malaysian Standard establishes a common basis for printing
equipment and Optical Character Recognition (OCR) in data
processing, by defining character shapes suitable for both human
and machine reading. Part 1 : Describe OCR-A.
Price RM30
MS ISO 1073 : Part 2 : 1993
Alphanumeric character sets for optical recognition : Part 2 :
Character sets OCR-B-shapes and dimensions of the printed
image.
This Malaysian Standard establishes a common basis for printing
equipment and Optical Character Recognition (OCR) in data
processing, by defining character shapes suitable for both human
and machine reading. Part 2 : Describe OCR-B.
Price RM60
MS ISO 1831 : 1993
Printing specifications for optical character recognition.
This Malaysian Standard specifies the basis for industry standards
for paper printing to be used in optical character recognition (OCR)
systems, particularly for document interchange, and to aid the
implementation and use of such systems.
Price RM50
MS ISO/IEC 2022 : 1993
Information technology - Character code structure and extension
techniques.
This Malaysian Standard specifies the structure of 8-bit codes and
7-bit codes which provide for the coding of character sets. The code
elements used in the structure are common to both the 8-bit and 7-
bit codes. The codes use a variety of techniques for extending the
capabilities of elementary 8-bit and 7-bit codes. Greater emphasis is
given to 8-bit codes in this edition of the Standard than in previous
editions because they are now more widely used.
Price RM50
MS ISO 2375 : 1993
Data processing - procedure for registration of escape
sequences.
This Malaysian Standard specifies the procedure to be followed by a
Registration Authority in preparing, maintaining and publishing a
register of escape sequences and of the characters or character sets
they identify.
Price RM20
MS ISO/IEC 4873 : 1993
Information technology - ISO 8-bit code for information inter-
change - Structure and rules for implementation.
This Malaysian Standard specifies an 8-bit code derived from, and
compatible with, the 7-bit coded character set specified in ISO/IEC
646.
Price RM30
MS ISO 5218 : 1993
Information interchange - Representation of human sexes.
This standard specifies a uniform representation of human sexes for
the interchange of information.
Price RM10
13
MS ISO 6093 : 1993
Information processing - Representation of numerical values in
character strings for information interchange.
This Malaysian Standard specifies three presentations of numerical
values, which are represented in character strings in a form readable
by machines, for used in interchange between data processing
systems.
Price RM20
MS ISO/IEC 6429 : 1999
Information technology - control functions for coded character
sets (First revision)
Defines control functions and their coded representations for use in
a 7-bit code, an extended 7-bit code, an 8-bit code or an extended 8-
bit code, if such a code is structured in accordance with International
Standard ISO 2022. This standard specifies technical means to
handle bi-directional texts in character-imaging devices. It is identical
with ISO/IEC 6429 : 1992 and it supersedes MS ISO 6429 : 1993.
Price RM100
MS ISO 6630 : 1993
Documentation - Bibliographic control characters.
This Malaysian Standard contains a set of 15 rules, filing rules and
indexing rules of the countries and language groups of the
bibliographic community.
Price RM10
MS ISO 6936 : 1993
Information processing - Conversion between the two coded
character sets of ISO 646 and ISO 6937-2 and the CCITT
international telegraph alphabet No. 2 (ITA 2).
This Malaysian Standard specifies the rules for conversion between
the 58 characters (including control functions) of the character sets
as mentioned in the title above.
Price RM10
MS ISO/IEC 6937 : 2003
Information technology – Coded graphic character set for text
communication – Latin alphabet (First revision).
This Malaysian Standard is identical with ISO/IEC 6937 : 2001. This
Malaysian Standard specifies: the coded representation of the
characters; a repertoire of the Latin alphabetic and non-alphabetic
characters for the communication of text in many European languages
using the Latin script; and rules for the definitions and use of graphic
character subrepertoires, i.e subsets of the specified character
repertoire. This Malaysian Standard replaces MS ISO 6937-1 : 1993
and MS ISO 6937-2 : 1993.
Price RM50
MS ISO 7064 : 1994
Data processing - Check character systems.
This Malaysian Standard specifies a set of check character systems
capable of protecting strings against errors which occur when people
copy or key data. The strings may be of fixed or variable length and
may have character sets which are:
- alphabetic (26 letters : A to Z)
- alphanumeric (letter and digits)
Embedded spaces and special characters are ignored.
This standard also specifies conformance requirements for products
described as generating check characters or checking strings using
the systems given in this standard.
This standard was adopted from the standard ISO 7064 : 1983 with
the same title.
Price RM20
MS ISO/IEC 7826-1 : 1995
Information technology - General structure for the interchange
of code values : Part 1 : Identification of coding schemes.
This Malaysian Standard specifies a general structure for the
identification of coding schemes for the purpose of information
interchange, using international coding scheme identifiers (ICSs).
Does not specify the mechanism for the association of ICS value
and code value and is therefore independent of syntax used in
interchange.
Price RM20
MS ISO/IEC 7826-2 : 1995
Information technology - General structure for the interchange
of code values : Part 2 : Registration of coding schemes.
This Malaysian Standard specifies the procedure for registering
coding schemes and the requirements for the administration of
international coding scheme identifiers (ICSs). Not applicable to
specification of procedures for administration of the coding schemes
themselves and aspects on technical implementation in interchange.
Price RM20
MS ISO/IEC 9281 : Part 1 : 1993
Information technology - Picture coding methods : Part 1 :
Identification.
This standard specifies the identification methods for coding of
pictorial information in digital form. It does not specify the contents of
the data field of a picture entity. For instance, this field may also
contain audio and/or animation data associated with the data
specifying the picture(s)
Price RM10
MS ISO/IEC 9281 : Part 2 : 1992
Information technology - Picture coding methods : Part 2 :
Procedure for registration.
Price RM20
14
MS ISO/IEC 10918-1 : 1995
Information technology - Digital compression and coding of
continuous-tone still images : Requirements and guidelines.
This Malaysian Standard specifies processes for converting source
image data to compress image data, processes for converting
compressed image data to reconstruct image data, coded
representations for compressed image data, and gives guidance on
how to implement these processes in practice. Is applicable to
continuous-tone-Gray scale or colour digital still image data and to a
wide range of applications which require use of compressed images.
Is not applicable to bi-level image data.
Price RM190
MS ISO/IEC 11172-1 : 2003
Information technology – Coding of moving pictures and
associated audio for digital storage media at up to about 1.5
Mbit/s - Part 1 : Systems.
This Malaysian Standard specifies the system layer of the coding. It
was developed principally to support the combination of the video
and audio coding methods defined in MS ISO/IEC 11172-2 and MS
ISO/IEC 11172-3.
Price RM70
MS ISO/IEC 11172-2 : 2003
Information technology – Coding of moving pictures and
associated audio for digital storage media at up to about 1.5
Mbit/s – Part 2 : Video.
This Malaysian Standard specifies the coded representation of video
for digital storage media and specifies the decoding process. The
representation supports normal speed forward playback, as well as
special functions such as random access, fast forward playback,
fast reverse playback, normal speed reverse playback, pause and
still pictures.
Price RM130
MS ISO/IEC 11172-3 : 2003
Information technology – Coding of moving pictures and
associated audio for digital storage media at up to about 1.5
Mbit/s – Part 3 : Audio This Malaysian Standard specifies the
coded representation of high quality audio for storage media
and the method
for decoding of high quality audio signals. The input of the encoder
and the output of the decoder are compatible with existing PCM
standards such as standard compact disc and digital audio tape.
Price RM170
MS ISO/IEC 11172-4 : 2003
Information technology – Coding of moving pictures and
associated audio for digital storage media at up to about 1.5
Mbit/s – Part 4 : Conformance testing
This Malaysian standard specifies how tests can be designed to verify
whether bit streams and decoders meets requirements specified in
Parts 1, 2 and 3 of MS ISO/IEC 11172. In this part of MS ISO/IEC
11172, encoders are not addressed specifically. An encoder is entitled
to be an MS ISO/OIEC 11172 encoder if it generates bit streams
complaint with the syntactic and semantic bitstream requirements
specified in pa5rs 1, 2 and 3 of ISO/IEC 11172.
Price RM50
MS ISO/IEC 11179-3 : 1995
Information technology - Specification and standardization of
data elements : Part 3 : Basic attributes of data elements.
This Malaysian Standard specifies attributes of data elements. Applies
to activities including the definition, specification and contents of data
element dictionaries; the design and specification of application-
oriented data models, databases and message types for data
interchange; the actual use of data in communications and information
processing systems; interchanging or referencing among various
collections of data elements.
Price RM30
MS ISO/IEC 11544 : 1995
Information technology - Coded representation of picture and
audio information - Progressive bi-level image compression.
A progressive encoding system transmits a compressed image by
first sending the compressed data for a reduced resolution version of
the image and then enhancing it as needed by transmitting additional
compressed data, which builds on that already transmitted. This
standard defines a coding method having progressive, progressive-
compatible sequential, and single-progression sequential modes and
suggests a method to obtain any needed low-resolution renditions. It
has been found possible to effectively use the defined coding and
resolution-reduction algorithms for lossless coding of greyscale and
colour images as well as bi-level images.
Price RM100
MS ISO/IEC 11770-1 : 2003
Key management – Part 1 : Framework
This Malaysian Standard:
− identifies the objective of key management;
− describes a general model on which key management
mechanisms are based;
− defines the basic concepts of key management common
to all the parts of this multi-part standard;
− defines key management services;
− identifies key management services;
− specifies requirements for the management of keying
material during its life cycle; and
− describes a framework for the management of keying
material during its life cycle.
Price RM30
MS ISO/IEC 13818-2 : 2003
Information technology – Generic coding of moving pictures and
associated audio information: Video – Part 2 – Amendment 1:
Content description data
This Malaysian Standard specifies the signaling protocol for the
support of the Wireless Terminal Authentication supplementary
services (SS-WTAT and SS-WTAN) at the Q reference point between
Private Integrated Services Network Exchanges (PINXs) connected
together within a Private Integrated Services Network (PISN).
Price RM230
MS ISO/IEC 13888-1: 2005
IT security techniques - Non-repudiation : Part 1: General.
Price RM180
MS ISO/IEC 13888-2: 2005
IT security techniques - Non-repudiation : Part 2: Mechanisms
using symmetric techniques.
Price RM140
MS ISO/IEC 13888-3: 2005
IT security techniques - Non-repudiation : Part 3: Mechanisms
using symmetric techniques.
Price RM120
MS ISO/IEC 14492 : 2003
Information technology – Lossy/lossless coding of bi-level
images
This Malaysian Standard defines methods for coding bi-level images
and sets of images (documents consisting of multiple pages). It is
particularly suitable for bi-level images consisting of text and dithered
(halftone) data.
Price RM170
15
MS ISO/IEC 14496-2 : 2003
Information technology – Coding of audio-visual objects – Part
2 : Visual
This part of MS ISO/IEC 14496 was developed in response to the
growing need for a coding method that can facilitate access to visual
objects in natural and synthetic moving pictures and associated
natural or synthetic sound for various applications such as digital
storage media, internet, various forms of wired or wireless
communication, etc.
Price RM 540
MS ISO 15394 : 2003
Packaging – Bar code and two-dimensional symbols for
shipping, transport and receiving labels.
This Malaysian Standard-specifies the minimum requirements for
the design of labels containing linear bar code and two-dimensional
symbols on transport units to convey data between trading partners;
- provides for traceability of transported units via a unique transport
unit identifier (licence plate); -provides guidance for the formatting
on the label of data presented in linear bar code, two-dimensional
symbol or human readable form; provides specific recommendations
regarding the choice of bar code symbologies, specifies quality
requirements, classes of bar code density; -makes recommendations
as to label placement, size and the inclusion of free text and any
appropriate graphics: - provides guidance in the selection of label
material.
Price RM60
MS ISO/IEC 15408-1 : 2003
Information technology – Security techniques – Evaluation
criteria for IT security – Part 1: Introduction and general model
This Malaysian standard defines which for historical and continuity
purposes are referred to herein as the Common Criteria (CC). NOTE.
CC is to be used as the basis for evaluation of security properties of
IT products and systems. By establishing such a common criteria
base, the results of an IT security evaluation will be meaningful to a
wider audience. This Malaysian Standard defines general concepts
and principles of IT security evaluation and presents a general model
of evaluation. This Malaysian Standard also presents constructs for
expressing IT security objectives, for selecting and defining IT security
requirements and for writing high-level specifications for products
and a system. In addition, the usefulness of each part of the CC is
described in terms of each of the target audiences.
Price RM70
MS ISO/IEC 15408-2 : 2003
Information technology – Security techniques – Evaluation
criteria for IT security – Part 2: Security functional requirements
This Malaysian Standard covers security functional components. As
defined in this part of the standard, security functional requirements
are the basis for the TOE. IT security functional requirements
expressed in a Protection Profile (PP) or a Security Target (ST). These
requirements describe the desired security behaviour expected of a
Target of Evaluation (TOE) and are intended to meet the security
objectives as stated in a PP or ST. These requirements describe
security properties that users can detect by direct interaction with
the TOE (i.e. inputs, outputs) or by the TOE’s response to stimulus.
Price RM360
MS ISO/IEC 15408-3 : 2003
Information technology – Security techniques – Evaluation
criteria for IT security – Part 3: Security assurance requirements
This Malaysian Standard defines the assurance requirements. It
includes the evaluation assurance levels (EALs) that define a scale
for measuring assurance, the individual assurance components from
which the assurance levels are composed, and the criteria for
evaluation of PPs and STs.
Price RM230
MS ISO/IEC 16022 : 2003
Information technology – International symbology specification
– Data matrix
This Malaysian Standard provides requirements, recommendations
and guidelines for a supporting function which is responsible for the
management of software product evaluation and for technologies
necessary for software product product evaluation.
Price RM110
MS ISO/IEC 16023 : 2003
Information technology – International symbology specification
– Maxi code
This Malaysian Standard defines the requirements for the
symbology known as Maxi Code. It specifies the Maxi Code
symbology characteristics, data character encodation, symbol
formats, dimensions and print quality requirements, error
correction rules, decoding algorithm, and user-selectable
application parameters
Price RM60
MS ISO/IEC 17799 : 2005
Information technology - Security techniques - Code of practice
for information security management (First revision)
Price RM130
MS ISO/IEC 18033: 1: 2005
Information technology - Security techniques - Encryption
algorithms - Part 1: General
Price RM120
MS ISO/IEC 18033: 3: 2005
Information technology - Security techniques - Encryption
algorithms - Part 3: Block ciphers.
Price RM370
MS ISO/IEC 18033: 4: 2005
Information technology - Security techniques - Encryption
algorithms - Part 4: Stream ciphers.
Price RM290
MS ISO 19105 : 2002
Geographic information - Conformance and testing
This Malaysian Standard specifies the framework, concepts and
methodology for testing and criteria to be achieved to claim
Best Seller!
16
MS ISO/IEC 2382-15 : 2005
Information technology – Vocabulary – Part 15 : Programming
languages
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM50
MS ISO/IEC 7185 : 1993
Information technology - programming language - Pascal.
This Malaysian Standard provides an unambiguous and machine
independent definition of programming language Pascal
Price RM80
MS ISO 8651 : Part 1 : 1992
Information processing systems : Computer graphics - Graphical
Kernel Systems (GKS) language bindings : Part 1 : FORTRAN.
MS ISO 7942 (GKS) specifies a language independent nudes of a
graphics system. For integration into a programming language, GKS
is embedded in a language dependent layer obeying the particular
conventions of that language. This part of ISO 8651 specifies such
a language dependent layer for the FORTRAN language.
Price RM120
MS ISO 8651 : Part 2 : 1992
Information processing systems : Computer graphics - Graphical
Kernel Systems (GKS) language bindings : Part 2 : Pascal.
MS ISO 7942 specifies a language independent nucleus of a graphics
system. For integration into a programming language, GKS is
embedded in a language dependent layer obeying the particular
conventions of that language-dependent layer for the Pascal
language.
Price RM170
MS ISO 8651 : Part 3 : 1992
Information processing systems : Computer graphics - Graphical
Kernel Systems (GKS) language bindings : Part 3 : ADA.
The GKS functional description specifies a language independent
nucleus of computer graphics programming. For integration into a
programming language, GKS is embedded in a language dependent
layer obeying the particular conventions of that language. This
standard specifies such a language dependent layer for the ADA
language.
This standard is part three of the series of standards on GKS language
binding.
Price RM190
conformance to the family of ISO geographic information standards.
It provides a framework for specifying abstract test suites (ATS) and
for defining the procedures to be followed during conformance testing.
Conformance may be claimed for data or software products or
services or by specifications including any profile or functional
standard.
Price RM30
MS ISO/IEC 27001: 2006
Information technology - Security techniques - Information
security management systems - Requirements
Price RM50
35.060 Languages used in information
technology
MS 1201 : 1991
Specification for information processing programming language
- Minimal BASIC.
This Malaysian Standard is designed to promote the interchangeability
of BASIC programs among a variety of automatic information
processing systems.
Price RM50
MS ISO/IEC 1539-1 : 2003
Information technology – Programming languages – Fortran –
Part 1 : Base language (First revision)
This Malaysian Standard is identical with ISO/IEC 1539-1 : 1997.
This Malaysian Standard specifies the signalling protocol for the
support of the Wireless Terminal Location Registration supplementary
service (SS-WTLR) and the Wireless Terminal Information exchange.
This Malaysian Standard replaces MS ISO/IEC 1539-1 : 1993.
Price RM380
MS ISO/IEC 1539-2 : 2003
Information technology – Programming languages – Fortran –
Part 2 : Varying length character strings (First revision)
This Malaysian Standard is identical with ISO/IEC 1539-2 : 2000.
This Malaysian Standard defines facilities in Fortran for the
manipulation of character strings of dynamically variable length. This
Malaysian Standard provides an auxiliary standard for the version of
the Fortran language specified by MS ISO/IEC 1539-1 : 1997 and
informally known as Fortran 95. This Malaysian Standard replaces
MS ISO/IEC 1539-2 : 1993.
Price RM30
MS ISO/IEC 1539-3 : 2003
Information technology – Programming languages – Fortran –
Part 3 : Conditional compilation (First revision).
This Malaysian Standard is identical with ISO/IEC 1539-3 : 1999.
This Malaysian Standard defines facilities for conditional compilation
in Fortran. This Malaysian Standard provides an auxiliary standard
for the version of the Fortran language specified by Part 1 of this
standard and informally known as Fortran 95.
This Malaysian Standard replaces MS ISO/IEC 1539-3 : 1993.
Price RM40
MS ISO 1989 : 1993
Programming language COBOL.
This Malaysian Standard form and establishes the interpretation of
programs expressed in the COBOL language.
Price RM20
17
MS ISO 8651 : Part 4 : 1993
Information technology computer graphics - Graphical Kernel
Systems (GKS) language bindings - Part 4 : C.
This Malaysian Standard specifies a standard binding for the C
computer programming language for GKS.
Price RM200
MS ISO 8907 : 1993
Information processing systems - Database language NDL
(Network Data Base Language) software.
This Malaysian Standard specifies the syntax and semantics of three
database languages;
Price RM140
MS ISO/IEC 8806 : Part 4 : 1993
Information technology computer graphics - Graphical Kernel
System for three Dimensions (GKS-3D) language bindings - Part
4 : C.
This Malaysian Standard specifies a standard binding for the C
computer programming language for GKS-3D
Price RM280
MS ISO/IEC 9075-1 : 2004
Information technology – Database languages –SQL – Part 1 :
Framework (SQL/Framework) (First revision)
Price RM90
MS ISO/IEC 9075-2 : 2004
Information technology – Database language – SQL – Part 2 :
Foundation (SQL/Foundation) (First revision)
This Malaysian Standard defines the data structures and basic
operations on SQL – data. It provides functional capabilities for
creating, accessing, maintaining, controlling and protecting SQL –
data. Price RM1280
MS ISO/IEC 9075-3 : 2004
Information technology – Database languages –SQL – Part 3 :
Call-level interface (SQL/CLI) (First revision)
Price RM410
MS ISO/IEC 9075-4 : 2004
Information technology – Database languages –SQL – Part 4 :
Persistent stored modules (SQL/PSM) (First revision)
Price RM190
MS ISO/IEC 9075-5 : 2004
Information technology – Database languages – SQL – Part 5 :
Host language bindings (SQL/Bindings)
Price RM400
MS ISO/IEC 9075-9 : 2004
Information technology – Database languages –SQL – Part 9 :
Management of external data (SQL/MED)
Price RM510
MS ISO/IEC 9075-10 : 2004
Information technology – Database languages –SQL – Part 10 :
Object language bindings (SQL/OLB)
Price RM410
MS ISO/IEC 9075-11 : 2004
Information technology – Database languages –SQL – Part 11 :
Information and definition schemas (SQL/Schemata)
Price RM300
MS ISO/IEC 9075-13 : 2004
Information technology – Database languages –SQL – Part 13 :
SQL routines and types using the JAVA™ programming
language (SQL/JRT)
Price RM210
MS ISO/TR 9547 : 1993
Programming language processors - Test methods - Guidelines
for their development and acceptability.
This Malaysian Standard provides guidelines for the development of
a test method based on a set of test programs and precise steps that
should be taken in order for a test method to get approval from ISO.
Price RM20
MS ISO/IEC 9579 : 2004
Information technology – Remote database access for SQL
with security enhancement
This standard, Remote Database Access for SQL (RDA), defines a
model for the remote interaction of an SQL-client and one or more
SQL-servers through communication media, and defines the
encoding of messages, the semantics of messages and associated
facilities for mediating the interaction between one SQL-client and
one SQL-server.
Price RM130
MS ISO/IEC 9899 : 2003
Programming languages - C
This Malaysian Standard specifies the form and establishes the
interpretation of programs written in the C programming language.
Price RM580
MS ISO/IEC 9945-1 : 1995
Information technology - Portable Operating System Interface
(POSIX) : Part 1 : System Application Program Interface (API) [C
Language].
This Malaysian Standard defines a standard operating system
interface and environment to support application portability at source-
code level.
Price RM360
MS ISO/IEC/TR 10034 : 1994
Guidelines for the preparation of conformity clauses in
programming language standards.
This Malaysian Standard provides guidelines for the preparation of
conformity clauses for processors and conformity clauses for
programs in language standards, together with an annex containing
a checklist to aid in this preparation.
Price RM20
MS ISO/IEC TR 10182 : 1995
Information technology - Programming languages, their
environments and system software interfaces - Guidelines for
languages bindings.
This Malaysian Standard section 2 contains the results of a survey
of current methods used for language binding development.
Price RM60
MS ISO/IEC 10206 : 1993 (2003)
Information technology programming language - Extended
Pascal.
Price RM220
18
MS 1759 : 2004
Geographic information - Features and attributes codes
This Malaysian Standard specifies the method for encoding of
geospatial data and provides the description of features and their
associated attributes for the exchange of digital geographic
information
Price RM180
MS 1907: 2006
Information technology - Guide for MS ISO/IEC 12207 (Software
life cycle processes
Price RM60
MS IEC 60559 : 1992
Binary floating – Point arithmetic for microprocessor systems.
This Malaysian Standard is intended for the implementation of the
floating-point system conforming to this standard which is entirely on
software, hardware, or in any combination of software and hardware.
It specifies: basic and extended floating-point number formats add,
subtracts, multiply, divide, square root, remain and compare
operations, conversions between integer and floating-point numbers,
conversions between different floating-point formats, conversions
between basic format floating-point and decimal strings, floating-point
exception and their handling, including non-numbers (NaNs)
Price RM30
MS ISO/IEC 2382-1 : 2005
Information technology – Vocabulary – Part 1 : Fundamental
terms
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM40
MS ISO/IEC 2382/11 : 2005
Information technology – Vocabulary – Section 02 : Arithmetic
and logic operations
This Malaysian Standard is intended to facilitate international
communication in data processing. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
data processing and identifies relationships between the entries.
Price RM40
MS ISO/IEC 10279 : 1993
Information technology programming language - FULL BASIC.
This Standard specifies the programming language - FULL BASIC.
The syntax and semantics details is specified in ANSI X3.113 : 1987.
This standard specifies its own conformance subsets, which included
those specified in ANSI X3.113. : 1987 and ECMA-116
Price RM20
MS ISO/IEC 10728 : 1995
Information technology - Information Resource Dictionary
System (IRDS) services interface.
This Malaysian Standard specifies any program full access to all
IRDS services. Defines the semantics of this interface, and also
specifies the language bindings for ISO Pascal (ISO 7185). Language
bindings for other ISO standard programming languages are provided
as separate standards. Makes no assumptions about an
implementation environment, and assumes no specific run-time or
compile time interfaces. Details of the IRDS series of standards are
to be found in ISO/IEC 10027.
Price RM110
35.080 Software development and system
documentation
MS 1277 : 1992
Information processing - Guidelines for the documentation of
computer-based application systems.
This Malaysian Standard establishes guidelines or the documentation
of computer-based application systems. It also contains checklists
with the aim of supporting effective activities throughout the system
life cycle. This standard does not cover the requirements for
documenting the hardware design of a computer-based application
system. Price RM30
MS 1278 : 1992
Information processing systems - User documentation and
cover information for consumer software packages.
Consumer software packages are ready-made packages sold off-
the-shelf to the consumer. Typically the software sold is prepared
with its user documentation. The information provided in the user
documentation on the cover of the package is often the only means
whereby the manufacturer or marketing organization can
communicate with the consumer and user. Therefore it is vitally
important that sufficient information is given to enable the consumer
to use the software successfully.
Price RM20
MS 1730 : Part 1 : 2004
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Specific requirements : Part 1 : Overview of local
area network standards
This Malaysian Standard provides an introduction to the set of
standards which describe local area networks,
specifically those which make use of the 48-bit MAC address format.
The MAG technologies described in this standard have in common
the ability to provide sufficient capability to support the MAG Service
which is defined in ISO/IEC 15802-1. The scope of this standard is
therefore limited to those Malaysian Standards which describe
processes and procedures resident in the Data Link and Physical
Layers of the OSI Basic Reference Model and can be said to relate
to local area networks. This Malaysian Standard does not itself
describe new Service or Protocol definitions. Its intent is to set the
context for local area networks which include both the International
Standards describing FDDI and the technologies described by the
set of MS ISO/IEC 8802.
Price RM20
BEST SELLER !
19
MS ISO/IEC 2382-3 : 2005
Information processing systems – Vocabulary – Part 03 :
Equipment technology
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM20
MS ISO 2382-6 : 2005
Information processing systems – Vocabulary – Part 06 :
Preparation and handling of data
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM20
MS ISO/IEC 2382-X : 2005
Information technology – Vocabulary – Section 10 : Operating
techniques and facilities
This Malaysian Standard is defines major basic concepts concerning
the operating techniques and facilities in use in a data processing
systems.
Price RM20
MS ISO/IEC 2382-20 : 2005
Information technology – Vocabulary – Part 20 : System
development
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships
between the entries.
Price RM20
MS ISO/IEC 7810: 2005
Identification cards - Physical characteristics (First revision).
Price RM160
MS ISO/IEC 7811-7: 2005
Identification cards - Recording technique - Part 7: Magnetic
stripe - high coercivity, high density.
Price RM230
MS ISO/IEC 7813: 2005
Identification cards - Financial transaction cards (First revision).
Price RM120
MS ISO 8631 : 1992
Information processing-program construction and conventions
for their representation.
This Malaysian Standard is concerned with the expression of
procedure oriented algorithms. -defines the nature of program
constructions; -indicates the manner in which construction can be
combined; provided specifications for a set of construction; permits
the definitions of a variety of subsets of defined constructions.
Price RM20
MS ISO/IEC 8211 : 1995
Information technology – Specification for a data descriptive
file for information interchange.
This Malaysian Standard specifies an interchange format to facilitate
the moving of files or parts of files containing data records between
computer systems.
Price RM80
MS ISO/IEC 9126 : 1993
Information processing software product evaluation quality
characteristics and guidelines.
This Malaysian Standard provides a part of a framework that is
necessary for the evaluation of software quality.
Price RM20
MS ISO/IEC 9294 : 1993
Information technology – Guidelines for the management of a
software documentation.
This Malaysian Standard addresses the policies, standards,
procedures, resources and plans which managers must concern
themselves with in order to manage software documentation
effectively.
Price RM20
MS ISO/IEC 12119 : 2003
Information technology - Software packages - Quality
requirements and testing
This Malaysian Standard is applicable to software packages like text
processors, spread-sheets, data base programs, graphics packages,
programs for technical or scientific functions and utility programs.
Price RM30
MS ISO/IEC 12207 : 2003
Information technology – Software life cycle processes
This Malaysian Standard establishes a common framework for
software life cycle processes, with well-defined terminology, that can
be referenced by the software industry. It contains processes,
activities and tasks that are to be applied during the acquisition of a
system that contains software, a stand-alone software product, and
software service and during the supply, development, operation and
maintenance of software products. Software includes the software
portion of firmware.
Price RM70
MS ISO/IEC 13240 : 2003
Information technology – Document description and processing
languages – Interchange Standard for Multimedia Interactive
Documents (ISMID)
This Malaysian Standard, known as the Interchange Standard for
Multimedia Interactive Documents or ISMID, facilitates the
interchange of Multimedia Interactive Documents (MIDs) among
heterogeneous interactive document development and delivery
systems by providing the architecture from which common
interchange languages can be created.
Price RM110
MS ISO/IEC 14598-1 : 2003
Information technology – Software product evaluation – Part 1 :
General overview
This Malaysian Standard provides requirements, recommendations
and guidelines for a supporting function which is responsible for the
management of software product evaluation and for technologies
necessary for software product evaluation.
Price RM30
MS ISO/IEC 14598-2 : 2003
Software engineering – Product evaluation – Part 2: Planning
and management
This Malaysian Standard provides requirements, recommendations
and guidelines for a supporting function which is responsible for the
management of product evaluation and for technologies necessary
for product evaluation.
Price RM20
MS ISO/IEC 14598-3 : 2003
Software engineering – Product evaluation – Part 3 : Process
for developers
20
This Malaysian Standard provides requirements and
recommendations for the practical implementation of software
evaluation when the evaluation is conducted in parallel with the
development and carried out by the developer. In particular, it may
be used to apply the concepts described in MS ISO/IEC 9126-1, 2
and 3 and MS ISO/IEC 14598-1, 2 and 3.
Price RM30
MS ISO/IEC 14598-4 : 2003
Software engineering – Product evaluation- Part 4: Process for
acquirers
This Malaysian Standard contains requirements, recommendations
and guidelines for the systematic measurement, assessment and
evaluation of software product quality during acquisition of “off-the-
shelf” software products, custom software products, or modifications
to existing software products. It uses the software quality model
described in MS ISO/IEC 9126-1; expands on the general process
for evaluating software quality that is defined in MS ISO/IEC 14598-
1; and uses the process for acquisition that is defined in MZS ISO/
IEC 12207. It can be used in conjunction with MS ISO/IEC 12119,
MS ISO/IEC 14598-2 (new), MS ISO/IEC 14598-3 (new) and MS
ISO/IEC 14598-6. The steps of the evaluation process are similar
between this part of MS ISO/IEC 14598 and MS ISO/IEC 14598-5,
but the context of use is quite different. In the case that acquirers
require third party testing of software packages against the quality
requirements for the package, MS ISO/IEC 12119 may be applied.
Price RM50
MS ISO/IEC 14598-5 : 2003
Information technology – Software product evaluation – Part 5 :
Process for evaluators
This Malaysian Standard provides requirements and
recommendations for the practical implementation of software product
evaluation when several arties need to understand, accept and trust
evaluation results. In particular, it may be used to apply the concepts
described in MS ISO/IEC 9126.
Price RM50
MS ISO/IEC 14764 : 2003
Information technology – Software maintenance
This Malaysian Standard describes in greater detail management of
the maintenance process described in ISO/IEC 12207. This standard
also establishes definitions for the various types of maintenance.
This standard provides guidance that applies to planning, execution
and control review and evaluation, and closure of the maintenance
process. The scope includes maintenance for multiple software
products with the same maintenance resources. “Maintenance” in
this standard means software maintenance unless otherwise stated.
Price RM50
MS ISO/IEC 15504-1 : 2005
Information technology - Process assessment – Part 1 :
Concepts and vocabulary
This Malaysian Standard provides overall information on the concepts
of process assessment and its use in the two contexts of process
improvement and process capability determination. It describes how
the parts of the suite fit together, and provides guidance for their
selection and use. It explains the requirements contained within ISO/
IEC 15504 and their applicability to performing assessments.
Price RM30
MS ISO/IEC 15504-2 : 2005
Information technology - Process assessment – Part 2 :
Performing an assessment.
This Malaysian Standard addresses the assessment of process and
the application of process assessment for improvement and capability
determination. It defines the minimum set of requirements for
performing an assessment that will ensure assessment results
are objective, impartial, consistent, repeatable and representative
of the assessed processes. Results of conformant process
assessments may be compared when the scopes of the assessments
are considered to be similar.
Price RM30
MS ISO/IEC 15504-3 : 2005
Information technology - Process assessment – Part 3 :
Guidance on performing an assessment.
This Malaysian Standard provides guidance on meeting the minimum
set of requirements for performing an assessment contained in ISO/
IEC 15504-2.
Price RM70
MS ISO/IEC 15504-4 : 2005
Information technology - Process assessment – Part 4 :
Guidance on use for process improvement and process
capability determination.
This Malaysian Standard provides guidance on how to utilize a
conformant process assessment within a process improvement
programme or a process capability determination.
Price RM50
35.100 Open systems interconnection (OSI)
MS ISO/IEC 7498-1 : 1995
Information technology - Open Systems Interconnection - Basic
Reference Model : Part 1 : The Basic model.
The model provides a common basis for the co-ordination of
standards development for the purpose of systems interconnection,
while allowing existing standards to be placed into perspective within
the overall Reference Model. The model identifies areas for
developing or improving standards. It does not intend to serve as an
implementation specification.
Price RM00
MS ISO/IEC 7498-2 : 1995
Information technology - Open Systems Interconnection - Basic
Reference Model : Part 2 : Security architecture.
This Malaysian Standard provides a general description of security
services and related mechanisms, which can be ensured by the
Reference Model, and of the positions within the Reference Model
where the services and mechanisms may provided. Extends the field
of application of ISO 7498 to cover secure communications between
open systems.
Price RM40
MS ISO/IEC 7498-3 : 1995
Information technology - Open Systems Interconnection - Basic
Reference Model : Part 3 : Naming and addressing.
This Part of Malaysian Standard : a) defines general mechanisms
for the use of names and addresses to identify and locate objects in
the OSI; b) defines the use of these mechanisms within the layered
structure of the Basic Reference Model. The specific form of names
and addresses is not within the scope of this part.
Price RM30
21
MS ISO/TR 9007 : 1993
Information processing systems concepts and terminology for
the conceptual schema and the information base.
This Malaysian Standard explains the roles and concepts for a
conceptual schema with the intention of providing a framework for
discussion and for the design of conceptual scheme languages.
Price RM190
MS ISO/IEC 9646-1 : 1996 (2003)
IT-OSI-Conformance testing methodology and framework : Part
1 : General concepts.
This Malaysian Standard cancels and replaces the first edition (1991).
Specifies a general methodology for testing the conformance of
products to OSI specifications which the products are claimed to
implement. The methodology applies to testing conformance to the
specification: of an OSI protocol; of a transfer syntax used in
combination with a specific OSI protocol profile, including the testing
of conformance to any specified information objects used in
combination with one or more of the protocols; of a combination of
OSI protocols.
Price RM60
MS ISO/IEC 9646-2 : 1996 (2003)
IT-OSI-Conformance testing methodology and framework: Part
2 : Abstract test suite specification.
This Malaysian Standard cancels and replaces the first edition (1991).
Specifies the requirements and gives guidance for the production of
system-independent conformance test suites for one or more OSI
specifications. Applicable to the production of all OSI conformance
testing specifications including all draft version of such conformance
testing specifications. Applicable to the production of abstract test
cases which check the conformance of an implementation to the
relevant static and/or dynamic conformance requirements by
controlling and observing protocol behaviour.
Price RM50
MS ISO/IEC 9646-3 : 1996
IT-OSI-Conformance testing methodology and framework : Part
3 : The tree and combined notation (TTCN).
This Malaysian Standard defines an informal test notation which is
independent of test methods, layers and protocols, and which reflects
the abstract testing methodology defined in MS ISO/IEC 9646-1 and
MS ISO/IEC 9646-2. Also specifies requirements and provides
guidance for using TTCN in the specification of system-independent
conformance test suites for one or more OSI standards. Two forms
of the notation are specified : a human-readable form and a machine-
processable form.
Price RM200
MS ISO/IEC 9646-4 : 1996 (2003)
IT-OSI-Conformance testing methodology and framework : Part
4 : Test realization.
This Malaysian Standard cancels and replaces the first edition (1991).
Specifies requirements and gives guidance concerning the realization
of a Means of Testing (MOT). Applicable to producing MOTs for
testing a single protocol, multiple protocols or a profile. These
requirements are limited to those aspects of an MOT which can be
mapped on the abstract testing functions defined in MS ISO/IEC 9646-
1, or which are essential to a proper use of the ATS.
Price RM30
MS ISO/IEC 9646-5 : 1996 (2003)
IT-OSI-Conformance testing methodology and framework : Part
5 : Requirements on test laboratories and clients for the
conformance assessment process.
This Malaysian Standard cancels and replaces the first edition (1991).
Specifies requirements on both the test laboratory and the client, for
the conduct of the conformance assessment process. Also provides
some guidance on the conformance assessment process.
Price RM50
MS ISO/IEC 9646-6 : 1996 (2003)
IT-OSI-Conformance testing methodology and framework : Part
6 : Protocol profile test specification.
This Malaysian Standard specifies the requirements and provides
guidance for the production of Profile Test Specifications (PTSs) for
conformance testing of OSI protocol profiles. Also specifies
requirements concerning the expression of conformance
requirements in protocol profile specifications. Applicable to testing
the conformance of a profile implementation to the static and dynamic
conformance requirements of each protocol and any information
objects included in the profile, by controlling and observing Protocol
Data Unit (PDU) exchanges.
Price RM30
MS ISO/IEC 9834-1 : 1996 (2003)
IT-OSI-Procedures for the operation of OSI registration
authorities : Part 1 : General procedures.
This Malaysian Standard specifies procedures which are generally
applicable to registration of objects within the Open Systems
Interconnection Environment. Specifies the hierarchical structure of
the naming-domain within which this registration occurs. Provides
guidelines for the establishment and operation of International OSI
Registration Authorities. Provides guidelines for additional
Recommendations/International Standards which choose to
reference the procedures in this standard.
Price RM30
MS ISO/IEC 9834-6 : 1996 (2003)
IT-OSI-Procedures for the operation of OSI registration
authorities : Part 6 : Application processes and application
entities.
This Malaysian Standard specifies maintenance procedures. No
requirement for an international registration authority has been
identified; therefore these procedures apply to registration at or below
the nodes of countries or ICDs.
Price RM20
MS ISO/IEC TR 10000-1 : 1998
Information technology - Framework and taxonomy of
International Standardized Profiles : Part 1 : General principles
and documentation framework (First revision).
This revised Malaysian Standard is identical with ISO/IEC TR 10000-
1:1995. This standard outlines concepts of profiles and taxonomies
(or Classification Schemes) and the format and contents of ISPs.
This standard shall supersede MS ISO/IEC TR 10000-1:1995 –
Information technology – Framework and taxonomy of international
standardized profiles – Part 1 : General principles and documentation
framework.
Price RM30
MS ISO/IEC TR 10000-2 : 1998
Information technology - Framework and taxonomy of
International Standardized Profiles : Part 2 : Principles and
taxonomy for OSI profiles (First revision).
This revised Malaysian Standard is identical with ISO/IEC TR 10000-
2:1995. This standard defines the concepts of OSI profiles and along
with MS ISO/IEC TR 10000-1, gives guidance to organisations making
proposals for draft ISPs, on the nature and content of the documents
they are producing. This standard shall supersede MS ISO/IEC TR
10000-2:1995 – Information technology – Framework and taxonomy
of international standardized profiles – Part 2 : Principles and
taxonomy for OSI profiles.
Price RM40
MS ISO/IEC TR 10000-3 : 1998
Information technology – Framework and taxonomy of
international standardized profiles – Part 3 : Principles and
taxonomy for open system environment profiles.
This Malaysian Standard id identical with ISO/IEC TR 10000-3 :1995.
The purpose of this standard is to provide the context for functional
standardization in support of Open System Environments (OSE). It
22
provides principles and a classification scheme for OSE profiles which
may be or have been submitted for ratification as International
Standardized Profiles (ISPs).
Price RM20
MS ISO/IEC 10181-2 : 2003
Information technology – Open Systems Interconnection –
Security frameworks for open systems : Authentication
framework
This Malaysian Standard on Security Frameworks for Open Systems
addresses the application of security services in an Open Systems
environment, where the term “Open Systems” is taken to include
areas such as Database, Distributed Applications, Open Distributed
Processing and OSI. The Security Frameworks are concerned with
defining the means of providing protection for systems and objects
within systems, and with the interactions between systems. The
Security Frameworks are not concerned with the methodology for
on structuring systems or mechanisms.
Price RM60
MS ISO/IEC ISP 10607-1 : 1998
Information technology – International Standardised Profile
AFTnn - File Transfer, Access and Management : Part 1 :
Specification of ACSE, presentation and session protocols for
the use by FTAM (First revision)
This standard specifies how the Association Control Service Element,
the Presentation Layer, and the Session Layer standards shall be
used to provide the FTAM functions for the International Standardized
Profiles MS ISO/IEC 10607. This standard supersedes MS ISO/IEC
ISP 10607-1:1995.
Price RM20
MS ISO/IEC ISP 10607-2 : 1998
Information technology - International Standardised Profile
AFTnn - File Transfer, Access and Management : Part 2 :
Definition of document types, constraint sets and syntaxes.
(First revision)
This standard contains the basic definitions of document types,
constraint sets, abstract syntaxes, and transfer syntaxes. This
standard supersedes MS ISO/IEC ISP 10607-2:1995.
Price RM80
MS ISO/IEC ISP 10607-3 : 1998
Information technology - International Standardised Profile
AFTnn - File Transfer, Access and Management : Part 3 : AFT11
- Simple file transfer service (unstructured). (First revision)
This standard covers transfer of files between the file stores of two
end systems, using the OSI connection-mode transport service to
provide the interconnection. One end system acts in the initiator
role and requests access to the file, the other end system acts in the
responder role and provides access to the file in the virtual file store.
This standard specifies implementations that support file transfer,
i.e. the ability to
(a) either read a complete file; or
(b) write (Replace and/or extend) to a file; or
(c) both; and optionally to
(a) create and delete a file; and
(b) read the attributes of a file.
This standard supersedes MS ISO/IEC ISP 10607-3:1995.
Price RM40
MS ISO/IEC ISP 10607-4 : 1998
Information technology - International Standardised Profile
AFTnn - File Transfer, Access and Management :
Part 4 : AFT12 – Positional file transfer service (Flat) (First
revision)
This standard covers transfer of files between the file stores of two
end systems, using the OSI connection-mode transport services to
provide the interconnection. One end system acts in the initiator
role and requests access to the file, the other end system acts in the
responder role and provides access to the file in the virtual file store.
This standard specifies implementations that support file transfer,
i.e. the ability to (a) either read a complete file; or (b) write (Replace
and/or extend and /or insert, depending on constraint set and
document type) to a file; or (c) both; and optionally to (d) create and
delete a file; and (e) read the attributes of a file. This standard
supersedes MS ISO/IEC ISP 10607-4:1995.
Price RM50
MS ISO/IEC ISP 10607-5 : 1998
Information technology – International standardized profiles
AFTnn - File Transfer, Access and Management : Part 5 : AFT22
- Positional file access service (flat) (First revision)
This standard covers access to files between the file stores of two
end systems, using the OSI connection-mode transport service to
provide the interconnection. One end system acts in the initiator
role and requests access to the file, the other end system acts in the
responder role and provides access to the file in the virtual file store.
This standard supersedes MS ISO/IEC ISP 10607-5:1995.
Price RM50
MS ISO/IEC ISP 10607-6 : 1998
Information technology – International standardized profiles
AFTnn - File Transfer, Access and Management : Part 6 : AFT3 -
File management service (First revision)
This standard covers management of file between the filestores of
two end systems, using the OSI connection-mode transport services
to provide the interconnection. One end system acts in the initiator
role and initiates the file management, the other end system acts in
the responder role and provides management of the file in the virtual
filestore. This standard specifies implementations that support file
management, i.e. the ability to (a) create and delete a file; and
(b) read and change the attributes of a file. This standard supersedes
MS ISO/IEC ISP 10607-6:1995.
Price RM30
MS ISO/IEC ISP 10608-1 : 1995
Information technology - ISP Tannnn - Connection-mode
transport service over connectionless-mode network service :
Part 1 : General overview and subnetwork-dependent
requirements.
This Malaysian Standard applies to end systems concerned with
operating in the Open Systems Interconnection (OSI) environment.
Specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the Connectionless-
mode Network Service. Profiles of the Connection-mode Transport
Service over Connectionless-mode Network Service are members
of a single group, Group TA, and support a single transport class, i.e.
Class 4.
Price RM20
MS ISO/IEC ISP 10608-2 : 1995
Information technology - ISP Tannnn - Connection-mode
transport service over connectionless-mode network service :
Part 2 : TA51 profile including subnetwork-dependent
requirements for CSMA/CD Local Area Networks (LANs).
This Malaysian Standard covers the taxonomy elements identified
as “TA” in the Directory of Profiles and ISPs contained in MS ISO/
IEC TR 10000-2. These elements constitute Transport profiles, group
A : Connection-mode transport Service over Connectionless-mode
Network Service. Specifies requirements for the profile identified in
MS ISO/IEC TR 10000 as TA51. The complete set of requirements
for TA51 consists of the requirements specified in MS ISO/IEC ISP
10608-1 and 10608-2.
Price RM20
MS ISO/IEC ISP 10608-4 : 1995
Information technology - ISP Tannnn - Connection-mode
transport service over connectionless-mode network service :
Part 4 : Definition of profile TA53, operation over a Token Ring
LAN subnetwork.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI standards which
collectively provide the connection-mode transport service using the
connectionless network service.
Price RM10
MS ISO/IEC ISP 10608-5 : 1995
Information technology - ISP Tannnn - Connection-mode
transport service over connectionless-mode network service :
Part 5 : TA1111/TA1121 profiles including subnetwork-dependent
requirements for X.25 packet-switched data networks using
virtual calls.
This Malaysian Standard covers the taxonomy elements identified
as “TA” in the Directory of Profiles and ISPs contained in MS ISO/
IEC TR 10000-2. These elements constitute Transport profiles, group
A : Connection-mode transport Service over Connectionless-mode
Network Service. Specifies requirements for the profile identified in
MS ISO/IEC TR 10000 as TA11n1. The complete set of requirements
for TA11n1 consists of the requirements specified in MS ISO/IEC
ISP 10608-1 and 10608-5.
Price RM10
MS ISO/IEC ISP 10608-13 : 1995
Information technology - ISP Tannnn - Connection-mode
transport service over connectionless-mode network service :
Part 13 : MAC sublayer and physical layer dependent
requirements for a Token Ring LAN subnetwork.
This Malaysian Standard is applicable to end systems or relay
systems operating over token ring LAN subnetworks in the Open
Systems Interconnection (OSI) environment. Relates to any of the
transport (Tx, Ux) or relay (Rx) profiles defined in MS ISO/IEC TR
10000-2, where such profile uses subnetwork type 53. Specifically,
provides a common set of requirements that are applicable to
transport groups TA, TB, TC, TD, TE, UA and UB, and to relay types
RA, RB, RC, RD, RE and RZ whenever subnetwork identifier 53 is
associated with transport group or relay type.
Price RM10
MS ISO/IEC ISP 10609-1 : 1996 (2003)
IT-ISP TB, TC, TD and TE-Connection-mode Transport Service :
Part 1 : Subnetwork-type independent requirements for Group
TB.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available.
Price RM30
MS ISO/IEC ISP 10609-2 : 1996 (2003)
IT-ISP TB, TC, TD and TE-Connection-mode Transport Service :
Part 2 : Subnetwork-type independent requirements for Group
TC.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available.
Price RM20
MS ISO/IEC ISP 10609-3 : 1996 (2003)
IT-ISP TB, TC, TD and TE-Connection-mode Transport Service :
Part 3 : Subnetwork-type independent requirements for Group
TD.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available.
Price RM20
MS ISO/IEC ISP 10609-4 : 1996 (2003)
IT-ISP TB, TC, TD and TE-Connection-mode Transport Service :
Part 4 : Subnetwork-type independent requirements for Group
TE.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available.
Price RM20
MS ISO/IEC ISP 10609-5 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 5 : Definition of profiles TB1111/TB1121.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport Service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available. Specifies the definition of profiles
TB1111/TE1121 in the TB group which uses Transport protocol
classes 0, 2 and 4.
Price RM10
MS ISO/IEC ISP 10609-6 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 6 : Definition of profiles TC1111/TC1121.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Is applicable to the provision of the connection-
mode Transport Service in end systems attached to any type of
subnetwork from which the standardized connection-mode Network
Service can be made available. Specifies the definition of profiles
TC1111/TC1121 in the TC group which uses Transport protocol
classes 0 and 2.
Price RM10
MS ISO/IEC ISP 10609-7 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 7 : Definition of profiles TD1111/TD1121.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service.
Price RM10
23
MS ISO/IEC ISP 10609-8 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 8 : Definition of profiles TE1111/TE1121.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-
mode Network Service. Is applicable to the provision of the
connection-mode Transport Service in end systems attached to any
type of subnetwork from which the standardized connection-mode
Network Service can be made available. Specifies the definition of
profiles TE1111/TE1121 in the TE group which uses Transport protocol
classes 2.
Price RM10
MS ISO/IEC ISP 10609-9 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 9 : Subnetwork-type dependent requirements for Network
Layer, Data Link Layer and Physical Layer concerning permanent
access to a packet switched data network using virtual calls.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service.
Price RM30
MS ISO/IEC ISP 10609-10 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 10 : LAN subnetwork-dependent, media-dependent
requirements.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Specifies subnetwork-type dependent requirements
applicable to an end system attached to a local area network (LAN)
subnetwork and using the MS ISO 8802-2 LLC type 2 protocol,
irrespective of the LAN medium.
Price RM60
MS ISO/IEC ISP 10609-11 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 11 : CSMA/CD subnetwork-dependent, media-dependent
requirements.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Applies only to communication over those
subnetworks which are MS ISO/IEC 8802-3 CSMA/CD LANs.
Price RM20
MS ISO/IEC ISP 10609-12 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 12 : Definition of profile TC51, provision of the OSI
connection-mode Transport Service using the OSI connection-
mode Network Service in an End System attached to a CSMA/
CD LAN. This Malaysian Standard is applicable to end systems
concerned with operating in the Open Systems Interconnection
environment. It specifies a combination of OSI standards, which
collectively provide the connection-mode Transport Service using
the connection-mode Network Service. Defines the TC51 profile.
Price RM10
MS ISO/IEC ISP 10609-14 : 1995 (2003)
Information technology - ISP TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service
: Part 14 : Definition of profile TC53, provision of the OSI
connection-mode Transport Service using the OSI connection-
mode Network Service in an End System attached to a token
ring LAN.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connection-mode Transport Service using the connection-mode
Network Service. Defines the TC53 profile.
Price RM20
MS ISO/IEC ISP 10611-1 : 1995
Information technology - ISP AMH1n - Message Handling
Systems - Common Messaging : Part 1 : MHS service support.
This Malaysian Standard contains the overall specifications of the
support of MHS elements of service and associated MHS functionality.
These specifications form part of the common messaging application
functions, as defined in the parts of MS ISO/IEC ISP 10611, which
form a common basis for content type-dependent International
Standardized Profiles for MHS that will be developed.
Price RM40
MS ISO/IEC ISP 10611-2 : 1995
Information technology - ISP AMH1n - Message Handling
Systems - Common Messaging : Part 2 : Specification of ROSE,
RTSE, ACSE, Presentation and Session Protocols for use by
MHS.
This Malaysian Standard specifies how the remote operations service
element, the reliable transfer service element, the association control
service element, the presentation layer, and the session layer
standards shall be used to provide the required OSI upper layer
functions for MHS. These specifications form part of the common
messaging application functions, as defined in the other parts of MS
ISO/IEC ISP 10611, which form a common basis for content type-
dependent International Standardized Profiles for MHS that will be
developed. Does not specify any profiles.
Price RM20
MS ISO/IEC ISP 10611-3 : 1995
Information technology - ISP AMH1n - Message Handling
Systems - Common Messaging : Part 3 : AMH11 - Message
Transfer (P1).
This Malaysian Standard covers message transfer between message
transfer agents (MTAs) using the P1 message transfer protocol. These
specifications form part of the common messaging application
functions, as defined in the parts of MS ISO/IEC ISP 10611, which
form a common basis for content type-dependent International
Standardized Profiles for MHS that will be developed. Specifies the
following profiles : AMH111 - Message Transfer (P1) - Normal mode
and AMH112 - Message Transfer (P1) - X.410 (1984) mode.
Price RM40
MS ISO/IEC ISP 10613-2 : 1996 (2003)
IT-International Standardized Profile RA-Relaying the
Connectionless-mode Network Service : Part 2 : LAN Sub
network dependent, media-independent.
This Malaysian Standard is applicable to end systems concerned
with operating in the Open Systems Interconnection environment. It
specifies a combination of OSI standards, which collectively provide
the connectionless-mode network services. This part specifies
requirements that are applicable to an interworking unit attached to
a LAN and using the MS ISO 8802-2 LLC type 1 protocol. Applies
only to communications over those sub networks which are LANs
using MS ISO 8802-2 LLC type 1.
Price RM20
24
MS ISO/IEC 10613-3 : 1995 (2003)
Information technology - International Standardized Profile RA
- Relaying the Connectionless-mode Network Service : Part 3 :
CSMA/CD LAN subnetwork-dependent, media-dependent
requirements.
This Malaysian Standard is ISP is applicable to interworking units
concerned with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI base standards that
collectively provide a network relay function for the connectionless-
mode network service. This Part specifies requirements that are
applicable to an interworking unit attached to MS ISO/IEC 8802-3
CSMA/CD LAN subnetwork. Applies only to communications over
those subnetworks which are MS ISO/IEC 8802-3 CSMA/CD LANs.
Price RM20
MS ISO/IEC 10613-5 : 1995 (2003)
Information technology - International Standardized Profile RA
- Relaying the Connectionless-mode Network Service : Part 5 :
Definition of profile RA51.51, relaying the connectionless-mode
Network Service between CSMA/CD LAN subnetwork.
This Malaysian Standard is ISP is applicable to interworking units
concerned with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI base standards that
collectively provide a network relay function for the connectionless-
mode network service. This Part defines the RA51.51.
Price RM20
MS ISO/IEC 10613-7 : 1995 (2003)
Information technology - International Standardized Profile RA
- Relaying the Connectionless-mode Network Service : Part 7 :
PSDN subnetwork-dependent, media-dependent requirements
for virtual calls over a permanent access.
This Malaysian Standard is ISP is applicable to interworking units
concerned with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI base standards that
collectively provide a network relay function for the connectionless-
mode network service. This Part specifies requirements that are
applicable to an interworking unit using virtual calls over a permanent
access to a PSDN. Applies only to communications using PSDN
subnetworks with permanent access on which virtual calls are used.
Price RM20
MS ISO/IEC 10613-8 : 1995 (2003)
Information technology - International Standardized Profile RA
- Relaying the Connectionless-mode Network Service : Part 8 :
Definition of profile RA51.1121, relaying the Connectionless-
mode Network Service between CSMA/CD LAN subnetworks and
PSDNs using virtual calls over a PSTN leased line permanent
access.
This Malaysian Standard is ISP is applicable to interworking units
concerned with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI base standards that
collectively provide a network relay function for the connectionless-
mode network service. This Part defines the RA51.1111 profile.
Price RM20
MS ISO/IEC 10613-9 : 1995 (*2003)
Information technology - International Standardized Profile RA
- Relaying the Connectionless-mode Network Service : Part 9 :
Definition of profile RA51.1121, relaying the Connectionless-
mode Network Service between CSMA/CD LAN subnetworks and
PSDNs using virtual calls over a digital data circuit/CSDN leased
line permanent access.
This Malaysian Standard is ISP is applicable to interworking units
concerned with operating in the Open Systems Interconnection (OSI)
environment. It specifies a combination of OSI base standards that
collectively provide a network relay function for the connectionless-
mode network service. This Part defines the RA51.1121 profile.
Price RM10
MS ISO/IEC TR 10730 : 1995
Information technology - Open Systems Interconnection -
Tutorial on naming and addressing.
This Malaysian Standard introduces the main concepts and
mechanisms which are defined in ISO 7498-3 to fulfil the needs for
Naming and Addressing objects in the Open Systems Interconnection
Environment. Also includes the rationale for some of the important
decisions made in the Naming and Addressing architecture.
Price RM50
MS ISO/IEC 10731 : 1995
Information technology - Open Systems Interconnection - Basic
Reference Model - Conventions for the definition of OSI services.
This Malaysian Standard establishes definitions of terms and
conventions for use by Recommendations International Standards
defining OSI-services within the scope of the Basic Reference Model
of Open Systems Interconnection.
Price RM30
MS ISO/IEC ISP 11183-1 : 1995
Information technology - ISP AOM1n OSI Management -
Management Communications : Part 1 : Specification of ACSE
presentation and session protocols for the use by ROSE and
CMISE.
This Malaysian Standard specifies the common basis for the
application functions as defined in ISO/IEC ISP 11183-2 and 11183-
3 and any of the subsequent parts that might be developed. Annexes
A to C give ISPICS requirements lists of ACSE, Presentation and
Session, for the use by ROSE and CMISE.
Price RM50
MS ISO/IEC ISP 11183-2 : 1995
Information technology - ISP AOM1n OSI Management -
Management Communications : Part 2 : CMISE/ROSE for AOM12
- Enhanced management communication.
This Malaysian Standard specifies how the OSI Common
Management Information Service Element (CMISE) combined with
the OSI Remote Operation Service Element (ROSE) shall be used
to provide the complete set of operation and notification services to
the CMISE-service-users of two end systems. Specifies the CMIP/
ROSE protocol features for the definition of the Enhanced
Management Communications profile, AOM12. Defines the support
level of the OSI management communication features needed by
implementations.
Price RM110
MS ISO/IEC ISP 11183-3 : 1995
Information technology - ISP AOM1n OSI Management -
Management Communications : Part 3 : CMISE/ROSE for AOM11
- Basic management communication.
This Malaysian Standard specifies how the OSI Common
Management Information Service Element (CMISE) combined with
the OSI Remote Operation Service Element (ROSE) shall be used
to provide the complete set of operation and notification services to
the CMISE-service-users of two end systems. Specifies the CMIP/
ROSE protocol features for the definition of the Basic Management
Communications profile, AOM11. Defines the support level of the
OSI management communication features needed by
implementations for providing the kernel functional unit only.
Price RM80
MS ISO/IEC ISP 11185-1 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 1 :
FVT211, FVT212 - Sequenced and Unsequenced Application
Control Objects.
25
This Malaysian Standard contains the definitions of two control types
that may be used to convey signals for device control from an
application to a terminal. One is used to convey these signals in
sequence with other data. The other is used to convey these signals
urgently when there is no requirement to maintain a sequence order
with other data.
Price RM10
MS ISO/IEC ISP 11185-2 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 2 :
FVT213, FVT214 - Sequenced and Unsequenced Terminal
Control Objects.
This Malaysian Standard contains the definitions of two control types
that may be used to convey signals for device control from an
application to a terminal. One is used to convey these signals in
sequence with other data. The other is used to convey these signals
urgently when there is no requirement to maintain a sequence order
with other data.
Price RM10
MS ISO/IEC ISP 11185-3 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 3 :
FVT215, FVT216 - Application RIO record loading control object,
terminal RIO record notification control objects.
This Malaysian Standard contains the type definitions of two control
objects that may be used to load the contents of a RIO record from
local storage at a terminal; store the contents of a RIO record to local
storage at a terminal; remove VT data items from local storage at a
terminal; enquire the status of a VT data item held in local storage at
a terminal.
Price RM20
MS ISO/IEC ISP 11185-4 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 4 :
FVT217 - Horizontal tabulation control object.
This Malaysian Standard contains the definition of a control object
type that may be used to define horizontal tabulation stops for use
during data entry into a display object. The manner of use of the
tabulation stops does not form part of this definition.
Price RM10
MS ISO/IEC ISP 11185-5 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 5 :
FVT218 - Logical image control object.
This Malaysian Standard contains the definition of a control object
type that may be used to affect the manner in which y-arrays within
the current update-window are represented in their image on a real
device. This control permits the display object to be scrolled vertically
through a form, or a text file, without the need to rewrite the entire
display object at each movement of its position within the form or file.
Price RM10
MS ISO/IEC ISP 11185-6 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 6 :
FVT219 - Status message control object.
This Malaysian Standard contains the definition of a control object
type that may be used to specify status messages for display in fixed
positions within the image area of a real device, irrespective of the
portion of the display object that is represented in the remainder of
the image area. Intended for use with a device that has a display
screen capable of being scrolled by local means through a display
object larger than the image area. Not intended for use with a hard
copy device such as a printer.
Price RM10
MS ISO/IEC ISP 11185-7 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 7 :
FVT2110 - Entry-control control object.
This Malaysian Standard contains the definition of a control object
type that is intended for use in conjunction with the Fields VT functional
unit. Enables a VT-user to specify field entry controls that are to be
applied to every field of a display object without the need to enter
them separately into the Field Definition Record of each field.
Price RM10
MS ISO/IEC ISP 11185-8 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 8 :
FVT221 - Forms FEICO (Field Entry Instruction Control Object)
No. 1.
This Malaysian Standard contains the type definition of a Field Entry
Instruction Control Object that provides substantial capabilities for
local validation of data entry under application control. Intended for
use in form-filling and similar applications.
Price RM20
MS ISO/IEC ISP 11185-9 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 9 :
FVT222 - Paged FEICO (Field Entry Instruction Control Object)
No. 1.
This Malaysian Standard contains the type definition of a Field Entry
Instruction Control Object that provides substantial capabilities for
local validation of data entry under application control. Intended for
use in form-filling and similar applications.
Price RM20
MS ISO/IEC ISP 11185-10 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 10 :
FVT231 - Forms FEICO (Field Entry Instruction Control Object)
No. 1.
This Malaysian Standard contains the type definition of a Field Entry
Pilot Control Object that provides substantial facilities during data
entry for local processing under application control. Intended for use
in form-filling, text editing and similar applications during a VT-
association in S-mode operation.
Price RM20
MS ISO/IEC ISP 11185-11 : 1995
Information technology - ISP FVT2nn - Virtual Terminal Basic
Class - Register of control object type definitions : Part 11 :
FVT232 - Paged FEICO (Field Entry Instruction Control Object)
No. 1.
This Malaysian Standard contains the type definition of a Field Entry
Pilot Control Object that provides substantial facilities during data
entry for local processing under application control. Intended for use
in form-filling, text editing and similar applications during a VT-
association in S-mode operation.
Price RM20
MS ISO/IEC ISP 11185-12 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class – Register of control object
type definitions : Part 12 : FVT 2116 – Generalized telnet synch
control object; FVT 2117 – Generalized telnet signal control
object; FVT 2118 – Generalized telnet negotiation control object;
FVT 2119 – Generalized telnet subnegotiation control object.
This Malaysian Standard is identical with ISO/IEC 11185-12 : 1995.
This standard contains the definition of control object types that are
used for the transfer of TELNET signals and negotiation of TELNET
options.
Price RM30
26
MS ISO/IEC ISP 11185-13 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class – Register of control object
type definitions : Part 13 : FVT 2111 – Waiting time control object
This Malaysian Standard is identical with ISO/IEC ISP 11185-13 :
1995. This standard contains the definition of control object type that
may be used to set a time limit associated with data entry into the
display object during S-mode operation of a VT-association. The
significance of the expiry of this time limit does not form part of this
definition and should be specified by any VTE-profile that references
a control object of this type.
Price RM20
MS ISO/IEC ISP 11185-14 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class – Register of control object
type definitions : Part 14 : FVT 2112 – Printer control object.
This Malaysian Standard is identical with ISO/IEC ISP 11185-14 :
1995. This standard contains the type definitions of a control object
that may be used to map region of the display object exclusively on
to a display surface such as a screen and a printing device and to
control the operations of the printer.
Price RM20
MS ISO/IEC ISP 11185-15 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class – Register of control object
type definitions : Part 15 : FVT 2113 – Field definition
management control object.
This Malaysian Standard is identical with ISO/IEC ISP 11185-15 :
1995. This standard contains the definition of a control object type
that may be used to enhance the field definition capabilities defined
in the ISO 9040 and ISO 9041 VT standards in order to provide a
flexible mechanism for using and updating field definition records.
Price RM20
MS ISO/IEC ISP 11185-16 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class – Register of control object
type definitions : Part 16 : FVT 2114 – Terminal signal titles
control object.
This Malaysian Standard is identical with ISO/IEC ISP 11185-16 :
1995. This standard contains the definition of a control object type
that may be used by an Application VT-User to associate titles,
intended to be meaningful to a human user at an end-terminal system,
with any of the terminal signals supported by the Sequenced and
Unsequenced Terminal CO types (taxonomy identifiers FVT213 and
FVT214) defined in Part 2 of ISO/IEC ISP 11185.
Price RM20
MS ISO/IEC ISP 11185-17 : 1998
Information technology – International standardized profiles
FVT2nn – Virtual terminal basic class - Register of control object
type definitions : Part 17 : FVT 2115 – Help text control object.
This Malaysian Standard is identical with ISO/IEC ISP 11185-17 :
1995. This standard contains the definition of a control object type
that may be used to facilitate the integration of the VT-User function
with a help provider facility resident in the terminal end-system. The
Application VT-user will have the capability to set up and control the
Help text to be associated with objects such as forms, fields and
terminals signals. The Help text will be available for display, via the
Help provider facility, upon request for in-context Help by the human
user of the terminal system.
Price RM20
35.100.10 Physical layer
MS ISO 2110 : 1992
Data communication : 25 pin DTE/DCE interface connector and
pin assignments.
This Malaysian Standard specifies the 25-pole connector and the
assignment of contact numbers at the interface between data terminal
equipment and data circuit-terminating equipment or parallel
automatic calling equipment. It is applicable to voice band modems,
public data network facilities, telegraph signal converters and
automatic calling equipment. For the pubic data network attachment
through the X.20 interface, functions of the interchange circuits are
in accordance with CCITT Recommendation X.24.
Price RM30
MS ISO/IEC 2593 : 1992
Information technology - Telecommunications and information
exchange between systems - 34-pole DTE/DCE interface
connector mateability dimensions and contact number
assignments.
This Malaysian Standard is abstract specifies the dimensions of the
connector housing and gives recommendations for the type of locking
device (jack-screw system) and connector shielding. Annex A
describes an adaptor for attachment of DTEs using the 34-pole
connector to DCEs not having implemented the 34-pole network
charts, system resources charts. Applicable in conjunction with ISO
2382/1.
Price RM30
MS ISO 4902 : 1992
Information technology data communication 37-Pole DTE/DCE
interface connector and contact number assignments.
This Malaysian Standard specifies the 37-pole connector and the
assignment of contact numbers at the interface between data terminal
equipment (DTE) and data circuit-terminating equipment (DCE) where
CCITT recommendations X.24 together with recommendations V.10
and V.11 are applicable.
Price RM30
MS ISO 4903 : 1992
Information technology data communication - 15 - Pole DTE/
DCE interface connector and contact number assignments.
This Malaysian Standard specifies the 15-pole connector and the
assignment of contact numbers at the interface between data terminal
equipment (DTE) and data circuit-terminating equipment (DCE) where
CCITT recommendations X.24, X.26 and X.27 are applicable.
Price RM30
MS ISO/TR 7477 : 1992
Information processing systems - Arrangements for DTE to DTE
physical connection using V.24 and X.24 interchange circuits.
This Malaysian Standard describes various arrangement for the
interconnection of Data Terminal Equipment (DTE) without
intermediate Data Circuit-terminating (DCE), in terms of electrical,
mechanical, and functional characteristics.
Price RM20
MS ISO/IEC 7480 : 1992
Information processing system - Start-stop transmission signal
quality at DTE/DCE interfaces.
This Malaysian Standard provides a guide for signal quality
requirements for serial data transmission at the interface between
start-stop transmission Data Terminal Equipment (DTE) and Data
Circuit-terminating Equipment (DCE). This signal quality requirement
is limited to start-stop transmission at the interface with isochronous
DCEs or synchronous DCEs such as CCITT type V.22.
Price RM20
27
MS ISO 1745 : 1992
Information processing : Basic mode control procedures for data
communication systems.
This Malaysian Standard specifies the method of implementing 7-bit
coded character set for information interchange on data transmission
channels. Transmission control procedures such as formats of the
transmitted messages and the supervisory sequences are also
defined. These control procedures deal with transmission over one
link at a time and relate to the class of control procedures which is
known as the basic mode. This is applicable at the interface between
data communication equipment and data terminal equipment. It is
accepted that the control procedures are a framework upon which a
system can be built and that, before the successful interconnection
or equipment from different supplies can be ensured, additional detail
need to be defined such as:
- structure of prefixes or addresses when used
- “time-out” procedures and recovery procedures
Price RM30
MS ISO 4335 : 1993
Information technology - Telecommunications and information
exchange between systems - High Level Data Link Control
(HDLC) procedures - Elements of procedures.
This Malaysian Standard specifies elements of data link control
procedures for synchronous of start/stop, code-transparent data
transmission using the HLDC frame structure and independent frame
numbering in both directions. The HDLC elements of procedures
are defined specially in terms of the actions that occur on receipt of
commands at a secondary or a combined station. They are to be
considered as common basis for establishing different types of control
procedures.
Price RM60
MS ISO 7478 : 1993
Information processing systems - Data communication multilink
procedures.
This Malaysian Standard specifies multilink procedures where a
multiplicity of parallel data links at the data link layer are used to
provide a variable bandwidth data link between network layer entities.
The multilink procedures (MLP) exist as a new upper sublayer of the
data link layer, operating between the network layer and a multiplicity
of single data link protocol functions (SLPS) in the data link layer.
Price RM20
MS ISO 7776 : 1993
Information processing systems - Data communication - high
level data link control procedures - Description of the X.25 LAPB
- Compatible DTE data link procedures.
This Malaysian Standard provides the ISO description of the CCITT.
Recommendation X.25 level 2 LABP DCE interface operation as
viewed by the DTE. It is the DTE counterpart of the X.25 LAPB DCE
description. It also provides the description of how two DTE’s are
capable of communicating directly with one another at the data link
level using the X.25 LAPB procedures without an intervening public
data network.
Price RM50
MS ISO 7809 : 1993
Information processing systems - Data communication - High
level data link control procedures - Consolidation of classes of
procedures.
This Malaysian Standard maintains maximum compatibility between
the basic types of procedures, unbalance and balanced, as this is
particularly desirable for data stations with configurable capability,
which may have the characteristics of a primary, secondary, or
combined station, as required for a specific connection.
Price RM40
MS ISO/IEC 8481 : 1998
Information technology – Telecommunications and information
exchange between systems – DTE to DTE direct connections.
This Malaysian Standard is identical with ISO/IEC 8481:1996. This
standard describes an arrangement for interconnection of Data
Terminal Equipment (DTE), without intermediate Data Circuit-
terminating Equipment (DCE), in terms of electrical, mechanical and
functional characteristics. This standard applies to DTEs with interface
circuits standardized in CCITT Recommendation X.24 for
transmission over public data networks.
Price RM20
MS ISO/IEC 8482 : 1995
Information technology - Telecommunications and information
exchange between systems - Twisted pair multipoint
interconnections.
This Malaysian Standard specifies the physical medium
characteristics for twisted pair multipoint interconnections in either
2-wire or 4-wire network topology, a binary and bi-directional signal
transfer, the electrical and mechanical design of the endpoint system
branch cables and the common trunk cable which may be up to 1200
m in length, the component measurements of the integrated type
generators and receivers within the endpoint system, the applicable
data signalling rate up to 12,5 Mbit/s.
Price RM30
MS ISO 9543 : 1992
Information processing systems information exchange between
systems - Synchronous transmission signal quality at DTE/DCE
interface.
This Malaysian Standard specifies signal quality requirements for
serial data transmission at the interface between synchronous
transmission data terminal equipment (DTE) and data circuit-
terminating equipment (DCE).
Price RM20
35.100.20 Data link layer
MS ISO 1155 : 1992
Information processing : Use of longitudinal parity to detect
errors in information messages.
This Malaysian Standard describes the user documentation and cover
information supplied with consumer software packages:
- User documentation
This documentation provides with all the information they need to
install and run the software. Typically this documentation takes the
form of one or more manuals included with the software inside the
wrapping. As a result, uses are not able to consult the manual(s)
until they have bought the package.
Price RM10
MS ISO 1177 : 1992
Information processing : Character structure for start/stop and
synchronous character oriented transmission information
messages
This Malaysian Standard specifies the character structure to be used
for serial-by-bit start/stop and synchronous data transmission systems
using the 7-bit coded character, 8-bit coded character and extensions
to these coded character sets as specified in ISO 2022. This standard
also specifies the parity sense to be used with the 7-bit coded
character sets. It is also applicable to the information transfer through
the interface standardized by CCITT and IEC/ISO between the data
terminal equipment and data circuit-terminating equipment. The
corresponding standards are CCITT V and X series
recommendations.
Price RM10
28
MS ISO 8471 : 1993
Information processing systems - data communication - high
level data link control balanced classes of procedures data-
linked layer address resolution/negotiation in switched
environment.
This Malaysian Standard defines the parameters and procedures
which may be employed for two stations to mutually determine the
data link to be used prior to logical data link layer addresses
establishment. It is applicable to data stations employing HLDC
balanced classes of procedures which provide the XID command/
response capability with two specific parameter fields.
Price RM10
MS ISO/IEC 8885 : 1995
Information technology - Telecommunications and information
exchange between systems - High-level Data Link Control
(HDLC) procedures - General purpose XID frame information
field content and format.
This Malaysian Standard defines a single-exchange negotiation
procedure for establishing operational characteristics when either
one or more HDLC stations are capable of providing multiple
selections. Provides a means for interchanging the necessary
information to establish, at a minimum, a data link connection between
two correspondents wishing to communicate. Describes the general
purpose XID frame information field content and format. Defines
encoding or information related to the basic HDLC standards only.
Price RM30
MS ISO/IEC TR 10171 : 1995
Information technology - Telecommunications and information
exchange between systems - List of standard data link protocols
that utilize High-level Data Link Control (HDLC) classes of
procedures and list of standardized XID format identifiers and
private parameter set of identification values.
This Malaysian Standard is the list of standard data link layer protocols
indicates the fundamental classes of procedures used plus the
optional functions employed. The list of standardized format identifies
the source document as well as describes the characteristics of the
information provided. The list of identification values indicates, in
addition to these values, the source and use of the private parameter.
Price RM20
MS ISO/IEC TR 10735 : 1995
Information technology - Telecommunications and information
exchange between systems - Standard group MAC addresses.
This Malaysian Standard provides a description of the representation
of ISO/IEC 8802 LAN MAC addresses, a description of the sub-
division of the universally administered standard group MAC address
block into ISO/IEC 10038 MAC bridge filtered MAC group addresses
and standard MAC group addresses, the criteria for the manner in
which new addresses are approved for entry into this report, a record
of approval assignments from the standard group MAC address block
and a record of group MAC addresses in use in standards which are
not part of the standard group MAC address block, e.g. ISO/IEC
9542.
Price RM20
MS ISO/IEC 10742 : 1996 (2003)
IT-Telecommunications and information exchange between
systems - Elements of management information related to OSI
data link layer standards.
This Malaysian Standard provides the specification of management
information within an Open System related to those operations of
the OSI Data Link Layer specified by the specifications in this
standard.
Price RM90
35.100.30 Network layer
MS ISO 8208 : 1993
Information technology - Data communication - X.25 packet layer
protocol for data terminal equipment.
It specifies the procedures, formats and facilities at the Packet Layer
for data terminal equipment (DTE) operating in conformance with
CCITT recommendation X.25. It can also be used in both open
systems interconnection (OSI) and non-OSI environments. It also
covers private networks that use CCITT Recommendation X.25
interface to a DTE.
Price RM140
MS ISO 8648 : 1994
Information processing systems - Open Systems
Interconnection internal organization of the network layer.
This Malaysian Standard defines an architectural model of the OSI
Network Layer as framework for OSI Network Layer Standardization
which allows incorporation of existing network within the OSI
architecture. This uniform framework encourages the design of real
subnetworks that fully support the OSI Network service whilst
accommodating the participation, in OSI environment, of other
subnetworks. It is intended to be used in design and application of
network layer protocols, operating between network entities, either
in end systems or in intermediate systems.
Price RM40
MS ISO/IEC 8880-1 : 1995
Information technology - Telecommunications and information
exchange between systems - Protocol combinations to provide
and support the OSI Network Service : Part 1 : General principles.
This Malaysian Standard applies to the environments defined in the
other parts of ISO/IEC 8880. Defines terms which may be used in
specifying the environments in which protocol combinations operate,
specifies principles for describing the support of the OSI network
service, and defines the conformance principles to be followed in the
other parts of ISO/IEC 8880.
Price RM20
MS ISO/IEC 8880-2 : 1995
Information technology - Telecommunications and information
exchange between systems - Protocol combinations to provide
and support the OSI Network Service : Part 2 : Provision and
support of the connection-mode Network service.
This Malaysian Standard describes the provision and support of the
connectionless-mode network service defined in ISO 8348. Defines
the environments dealt with in ISO/IEC 8880-2.
Price RM20
MS ISO/IEC 8880-3 : 1995
Information technology - Telecommunications and information
exchange between systems - Protocol combinations to provide
and support the OSI Network Service : Part 3 : Provision and
support of the connectionless-mode Network service.
This Malaysian Standard describes the provision and support of
the connectionless-mode network service defined in ISO 8348.
Defines the environments dealt with in ISO/IEC 8880-2.
Price RM20
MS ISO/IEC TR 9577 : 1996
IT-Telecommunications and information exchange between
systems; protocol identification in the network layer.
This Malaysian Standard provides : description of a means to permit
a protocol to be identified; a record of the structure and allowable
ranges of protocol identifier(s) which can be assigned by ISO/IEC
29
JTC 1 SC6, CCITT and other authorities; a record of the values of
protocol identifiers used by OSI network layer protocols and non-
OSI protocols occupying a similar position, in particular, only protocols
with protocol control information commencing in octet 1 of the protocol
data unit are covered; a record of the values that are in use as protocol
control information in non-network layer protocols where they impact
on network layer protocol identification.
Price RM20
MS ISO/IEC 10177 : 1996 (2003)
IT-Telecommunications and information exchange between
systems; provision of the connection-mode network internal
layer service by intermediate systems using ISO/IEC 8208, the
X.25 packet layer protocol.
This Malaysian Standard specifies the method by which a network-
layer interworking unit (IWU) uses the X.25 packet layer protocol to
support the OSI connection-mode network service. The specification
is expressed in terms of a mapping between internal layer service
defined in ISO/IEC 10028 and the virtual call and permanent virtual
circuit services of the X.25 packet layer protocol. Provides the PICS
(Protocol Implementation Conformance Statement) proforma in
compliance with the relevant requirements, and in accordance with
the relevant guidance, given in MS ISO/IEC 9646-2.
Price RM40
MS ISO/IEC 10588 : 1995
Information technology - Use of X.25 packet layer protocol in
conjunction with X.21/X.21 bis to provide the OSI connection-
mode Network Service.
This Malaysian Standard applies to environments including a CSDN
and an ISDN terminal adaptor complying with recommendation X.30
which provides an X.21 access. Provision is achieved by specifying
the mapping of the CONS primitives and parameters to and from the
elements of the protocols used (X.25 PLP and X.21).
Price RM20
MS ISO/IEC 10732 : 1995
Information technology - Use of X.25 packet layer protocol to
provide the OSI connection-mode network service over the
telephone network.
This Malaysian Standard applies to environments including telephone
network leased circuit connection between two DTEs; telephone
network switched connection between two DTEs; DTE access to a
PSDN via a telephone network leased circuit connection; DTE access
to a PSDN via a telephone network switched connection. Provision
is achieved by specifying the mapping of the CONS primitives and
parameters to and from the elements of the protocols used.
Price RM20
MS ISO/IEC 10733 : 1995
Information technology - Telecommunication and information
exchange between systems - Elements of management
information relating to OSI network layer standards.
This Malaysian Standard network layer management information is
defined by specifying the managed object class definition of network
layer managed objects following guidelines put forth by the structure
of management information (ISO/IEC 10165 and CCITT
Recommendations X.720 - X.723), the relationship of the managed
objects and attributes to both the operation of the layer and to other
objects and attributes of the layer, and the action type operations on
the attributes of network layer managed objects that are available to
OSI systems management.
Price RM130
MS ISO/IEC 10747 : 1995
Information technology - Telecommunication and information
exchange between systems - Protocol for exchange of inter-
domain routing information among intermediate systems to
support forwarding of ISO 8473 PDUs.
This Malaysian Standard specifies a protocol to be used by boundary
intermediate systems to acquire and maintain information for the
purpose of routing NPDUs between different routing domains. Lays
down the procedures for the exchange of inter-domain reachability
and path information between BISs, the procedures for maintaining
inter-domain routing information bases within a BIS, the encoding of
protocol data units used to distribute inter-domain routing information
between BISs, the functional requirements for implementations that
claim conformance to this standard. The protocol described operates
at the level of individual routing domains. Does not cover the
establishment of administrative domains.
Price RM120
35.100.40 Transport layer
MS ISO/IEC TR 10000-3 : 1998
Information technology – Framework and taxonomy of
international standardized profiles – Part 3 : Principles and
taxonomy for open system environment profiles.
This Malaysian Standard is identical with ISO/IEC TR 10000-3 : 1995.
The purpose of this standard is to provide the context for functional
standardization in support of Open System Environments (OSE). It
provides principles and a classification scheme for OSE profiles which
may be or have been submitted for ratification as International
Standardized Profiles (ISPs).
Price RM20
MS ISO/IEC 10025-3 : 1995
Information technology - Telecommunication and information
exchange between systems - Transport conformance testing for
connection-mode transport protocol operating over connection-
mode network service : Part 3 : Transport test management
protocol specification.
This Malaysian Standard defines procedures for a single protocol for
the transfer of data and control information from a lower tester to an
upper tester as well as the structure and encoding of the test
management protocol data units used for the transfer of data and
control information. These procedures are defined in terms of the
interactions between test management entities through the exchange
of test management protocol data units and the interactions between
a test management entity and the transport service provider through
the exchange of transport service primitives.
Price RM50
MS ISO/IEC 10737 : 1995
Information technology - Telecommunication and information
exchange between systems - Elements of management
information related to OSI transport layer standards.
This Malaysian Standard provides the specification of management
information within an Open System related to those operations of
the OSI Transport Layer specified by CCITT Recommendations and
International Standards. Transport Layer management information
is defined by specifying : the managed object class definition of
Transport
Layer Managed Objects, the relationship of the Managed Objects
and attributes to both the operation of the layer and to other objects
and attributes of the layer, and the action type operations on the
attributes of Transport Layer Managed Objects that are available to
OSI Systems Management.
Price RM50
35.100.60 Presentation layer
MS ISO/IEC 10729-1 : 1995
Information technology - Open Systems Interconnection -
30
Conformance test suite for the presentation layer : Part 1 : Test
suite structure and test purposes for the presentation protocol.
This Malaysian Standard applies to conformance test suites for testing
presentation protocol implementations which operate over a
connection oriented session service (ISO 8326) and which claim
conformance to ISO 8823. Does not specify how the conformance
tests are to be realized or used, nor how the test results are to be
presented or used. The choice of the test method may restrict the
test purposes which can be realized.
Price RM20
35.100.70 Application layer
MS ISO/IEC 9545 : 1995
Information technology - Open Systems Interconnection -
Application layer structure.
This Malaysian Standard defines the description of the application
layer contained in the basic reference model for OSI (ITU-T Rec.
X.200/ISO/IEC 7498-1). Provides a framework for coordinating the
development of existing and future application layer recommendations
and standards. Is provided for reference by application layer
recommendations and standards. The purpose is to facilitate a
coherent and modular approach to the structuring of specifications
for application layer behaviour.
Price RM30
MS ISO/IEC 9594-1 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 1 : Overview of concepts, models and services.
This Malaysian Standard is the Directory provides the directory
capabilities required by OSI applications, OSI management
processes, other OSI layer entities, and telecommunication services.
It is a characteristics of the Directory, except as a consequence of
differing access rights or unpropagated updates, that the results of
directory queries will not be dependent on the identity or location of
the enquirer. This characteristic renders the Directory unsuitable for
some telecommunication applications, e.g. some types of routing.
Informative Annex A describes the applicability of the Directory. MS
ISO/IEC 9594 consists of 8 parts.
Price RM20
MS ISO/IEC 9594-2 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 2 : Models.
This Malaysian Standard is the models defined in this part provide a
conceptual and terminological framework for the other parts of MS
ISO/IEC 9594 which define various aspects of the Directory. Those
models are the functional and organizational models, the security
model, and the information model. The Annexes A to F describe the
mathematics of trees, object identifier usage, information framework
in the ASN. 1 module, name design criteria, and access control, and
give an alphabetical index of definitions.
Price RM30
MS ISO/IEC 9594-3 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 3 : Abstract service definition.
This Malaysian Standard defines an abstract way the externally visible
service provided by the Directory. Does not specify individual
implementations or products. Annex A provides the ASN.1 module
which contains all the definitions associated with the Abstract Service.
Annex B includes the Directory Object Identifiers.
Price RM30
MS ISO/IEC 9594-5 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 5 : Protocol specifications.
This Malaysian Standard specifies the Directory Access Protocol and
the Directory System Protocol, fulfilling the abstract services specified
in MS IS)/IEC 9594-3 and MS ISO/IEC 9594-4. Annex A describes
the DAP in the ASN.1 module.
Price RM20
MS ISO/IEC 9594-6 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 6 : Selected attributes types.
This Malaysian Standard specifies a number of attribute types which
may be found useful across a range of applications of the Directory.
The attributes types (and attribute syntaxes) fall into three categories
: those used by a wide variety of applications or understood and/or
used by the Directory itself; those internationally standardized but
application-specific; and those which can be defined by any
administrative authority for any purpose.
Price RM20
MS ISO/IEC 9594-7 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 7 : Selected object classes.
This Malaysian Standard specifies a number of selected attribute
sets and objects classes which may be found useful across a range
of applications of the Directory. Any Administrative Authority can define
its own object classes or subclasses for any purpose. Administrative
authorities may support some or all the selected object classes, and
may also add object classes.
Price RM30
MS ISO/IEC 9594-8 : 1995
Information technology - Open Systems Interconnection - The
directory : Part 8 : Authentication framework.
This Malaysian Standard specifies the form of authentication
information held by the Directory, describes how authentication
information may be obtained from the Directory, states the
assumptions made about how authentication information is formed
and placed in the Directory, defines three ways in which applications
may use this authentication information to perform authentication
and describes how other security services may be supported by
authentication.
Price RM30
MS ISO/IEC 9596-1 : 1995
Information technology - Open Systems Interconnection -
Common management information protocol : Part 1 :
Specification
This Malaysian Standard defines an informal test notation which is
independent of test methods, layers and protocols, and which reflects
the abstract testing methodology defined in ISO/IEC 9646-1 and ISO/
IEC 9646-2. Also specifies requirements and provides guidance for
using TTCN in the specification of system-independent
conformance test suites for one or more OSI standards. Two forms
of the notation are specified : a human-readable form and a machine-
processable form.
Price RM50
MS ISO/IEC 9596-2 : 1995
Information technology - Open Systems Interconnection -
Common management information protocol : Part 2 : Protocol
Implementation Conformance Statement (PICS) proforma.
This Malaysian Standard provides the PICS proforma for the detailed
expression of the conformance requirements of CCITT Rec. X.711/
ISO/IEC 9596-1. This PICS proforma is in compliance with the
relevant requirements and in accordance with the relevant guidance,
given in CCITT Rec. X.291/ISO/IEC 9646-2.
Price RM80
MS ISO/IEC 9834-2 : 1996 (2003)
IT-OSI-Procedures for the operation of OSI registration
authorities : Part 2 : Registration procedures for OSI document
types.
31
MS ISO/IEC 10164-4 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 4 : Alarm reporting function.
This Malaysian Standard establishes user requirements for the alarm
reporting function and a model that relates the service and generic
definitions provided by this function to user requirements, defines
the service provided by the function and generic notification types
and parameters, specifies the protocol and the abstract syntax,
defines the relationship between this service and SMI notifications,
specifies compliance requirements placed on other standards that
make use of these generic definitions, defines relationships with other
systems management functions, specifies conformance
requirements.
Price RM30
MS ISO/IEC 10164-5 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 5 : Event report management
function.
This Malaysian Standard defines a system management function
which may be used by an application process in a centralized or
decentralized management environment to interact for the purpose
of systems management. Establishes user requirements for the event
report management function, establishes models that relate the
services provided by this function to user requirements, defines the
services provided by the function, specifies the protocol that is
necessary in order to provide the services, defines the relationship
between the services and SMI operation and notifications, defines
relationships with other systems management functions, specifies
conformance requirements.
Price RM30
MS ISO/IEC 10164-6 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 6 : Log control function.
This Malaysian Standard establishes user requirements for the log
control function; establishes models that relate the service rovided
by the function to user requirements; defines the services provided
by the function; specifies the protocol that is necessary in order to
provide the services; defines the relationship between the services
and SMI operations and notifications; defines relationships with other
systems management function; specifies conformance requirements.
Price RM30
MS ISO/IEC 10164-7 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 7 : Security alarm reporting function.
This Malaysian Standard establishes user requirements for the
service definition needed to support the security alarm reporting
function, defines the services provided by the security alarm reporting
function, specifies the protocol that is necessary in order to provide
the service, defines the relationship between the service and
management notifications, defines relationships with other systems
management functions, specifies conformance requirements. The
security alarm reporting function is a system management function
which may be used by an application process in a centralized or
decentralized management environment to exchange information for
the purpose of systems management.
Price RM30
MS ISO/IEC 10164-8 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 8 : Security audit trail function.
This Malaysian Standard establishes user requirements for the
service definition needed to support the security audit trail
reportingfunction, defines the services provided by the security audit
trail reporting function, specifies the protocol that is necessary in
order to provide the service, defines the relationship between the
service and management notifications, defines relationships with other
systems management functions, specifies conformance
requirements.
Price RM40
This Malaysian Standard specifies the contents of register entries
recording information about OSI document types, and assigning and
unambiguous name of ASN.1 type object identifier to OSI document
type definitions and the procedures for the operation of OSI document
types.
Price RM20
MS ISO/IEC 9834-4 : 1996 (2003)
IT-OSI-Procedures for the operation of OSI registration
authorities : Part 4 : Register of VTE profiles.
This Malaysian Standard specifies the contents of register entries
recording information about VTE profiles and assigning and
unambiguous name of ASN.1 type object identifier to VTE profile
definitions.
Price RM20
MS ISO/IEC 9834-5 : 1996 (2003)
IT-OSI-Procedures for the operation of OSI registration
authorities : Part 4 : Register of VT control object definitions.
This Malaysian Standard specifies the contents of register entries
recording information about VT control object definitions and assigning
and unambiguous name of ASN.1 type object identifier to VT CO
definitions.
Price RM30
MS ISO/IEC 10164-1 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 1 : Object management function.
This Malaysian Standard defines a systems management function
which may be used by an application process to interact for the
purpose of systems management. Among others, establishes user
requirements for the state management function, establishes a model
that relates the services and generic definitions provided by this
function to user requirements, defines the services provided by the
function, specifies the protocol that is necessary in order to provide
the services, defines the relationship between the service and
management operations and notifications, defines relationships with
other systems management functions.
Price RM30
MS ISO/IEC 10164-2 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 2 : State management function.
This Malaysian Standard defines a systems management function
which may be used by an application process to
interact for the purpose of systems management. Among others,
establishes user requirements for the state management function,
establishes a model that relates the services and generic definitions
provided by this function to user requirements, defines the services
provided by the function, specifies the protocol that is necessary in
order to provide the services, defines the relationship between the
service and management operations and notifications, defines
relationships with other systems management functions.
Price RM30
MS ISO/IEC 10164-3 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 3 : Attributes for representing
relationship.
This Malaysian Standard defines a systems management function
which may be used by an application process to interact for the
purpose of systems management. Among others, establishes user
requirements for attributes, establishes a model that relates the
services and generic definitions provided by this function to user
requirements, defines the services provided by the function, specifies
the protocol that is necessary in order to provide the services, defines
the relationship between the service and management operations
and notifications, defines relationships with other systems
management functions, specifies conformance requirements.
Price RM30
32
MS ISO/IEC 10164-10 : 1998
Information technology – Open Systems interconnection –
Systems Management : Usage metering function for accounting
purposes.
This standard defines a systems management function which may
be used by an application process in a centralised or decentralised
management environment to interact to interact for the purpose of
systems management. It also defines the usage metering function
and consists of service and generic definitions.
Price RM60
MS ISO/IEC 10164-12 : 1995
Information technology - Open Systems Interconnection -
Systems Management : Part 12 : Test management function.
This Malaysian Standard defines a system management function
that my be used by an application process in a centralized or
decentralized management environment to interact for the purpose
of systems management and a function which consists of generic
definitions, services and functional units. Does not define : the nature
of any implementation intended to provide the test management
function and the nature of any interactions which result in the use of
the test management function.
Price RM60
MS ISO/IEC 10164-13 : 1998
Information technology – Open systems interconnection –
Systems Management: Summarization function.
This standard defines the Summarization Function. The
Summarization Function is a Systems Management function which
may be used by an application process in centralised or decentralised
management environment to interact for the purpose of systems
management, as defined by the OSI Management Framework.
Price RM70
MS ISO/IEC 10164-15 : 1998
Information technology – Open systems interconnection –
Systems Management: Scheduling function.
This standard defines the scheduling function. The scheduling
function is a systems management function which may be used by
an application process in a centralised or decentralised management
environment to exchange information and commands for the purpose
of systems management.
Price RM90
MS ISO/IEC 10164-17 : 1998
Information technology – Open systems interconnection –
Systems Management : Change over function.
This Malaysian Standard is identical with ISO/IEC 10164-17 : 1995.
This standard defines a systems management function which may
be used by an application in a centralised or decentralised
management environment to interact for the purpose of systems
management. It defines services for managing one to one back-up
relationships and specifies a set of generic definitions.
Price RM60
MS ISO/IEC 10165-1 : 1995
Information technology - Open Systems Interconnection -
Management information service - Structure of information
management : Part 1 : Management information model.
This Malaysian Standard defines the information model of
managedobjects and their attributes that corresponds to the
information aspects of the systems management model introduced
in the systems management overview CCITT Rec. X.701/ ISO/IEC
10040; prescribes the principles of naming managed objects and
their attributes; defines the logical structure of systems management
information; defines the concepts of managed objects in the
information model; describes the concept of managed object classes
and the relationships into which managed objects and managed
object classes can enter.
Price RM30
MS ISO/IEC 10165-2 : 1995
Information technology - Open Systems Interconnection -
Management information service - Structure of information
management : Part 2 : Definition of management information.
This Malaysian Standard defines the managed objects classes,
attributes types, name bindings, packages, specific attributes, action
types, parameter types and notification types documented in
accordance with CCITT Rev. X.722/ISO/IEC 10165-4 and specifies
compliance requirements placed on other CCITT Recommendations/
International Standards that make use of these definitions. Is
applicable to the development of OSI managed object class
specifications and provides generic definitions that support OSI
systems management functions.
Price RM80
MS ISO/IEC 10165-4 : 1996 (2003)
IT-OSI Management information services-Structure of
information management : Part 4 : Guidelines for the definition
of managed objects.
This Malaysian Standard specifies the relationships between the
relevant OSI management Recommendations and International
Standards and the definition of managed object classes, the
appropriate methods to be adopted for the definition of managed
object classes, the relationship of managed object class definitions
to management protocol and the recommended documentation
structure for managed object class definitions. Is applicable tot he
development of any Recommendation/International Standard which
defines management information which is to be transferred or
manipulated by means of OSI management protocol and the
managed objects to which that information relates.
Price RM60
MS ISO/IEC 10165-5 : 1996 (2003)
IT-OSI Management information services-Structure of
information management : Part 5 : Generic management
information.
This Malaysian Standard specifies developers of OSI
Recommendations and International Standards and the definition of
managed object definitions with generic definitions of managed object
classes, which maybe used as super classes, using the template
notation defined in CCITT Rec. X.722 / MS ISO/IEC 10165-4,
including the definition of any packages, attributes, attribute groups,
behaviour, actions, notifications and parameters that may be
associated with the super classes. Also defines functional units
required by layer- or resource-specific management standards which
are not defined in the CCITT Rec. X.73X / ISO/IEC 10164 series of
systems management.
Price RM30
MS ISO/IEC 10739-1 : 1996 (2003)
IS-OSI-Conformance test suite for ISO 9041-1, Virtual terminal
basic class protocol : Part 1 : Test suite structure and test
purposes.
This Malaysian Standard specifies a test suite structure and test
purposes for the whole of the BCVT protocol as defined in ISO 9041.
Specifies the relationship between the elements of the test suite
structure and the Protocol Implementation Conformance Statement.
Does not specify how conformance tests are to be realised or used
nor how the test results are to be presented or used. Does not included
general assessment of performance, reliability or robustness of
relevant protocol implementations, nor an assessment of the design
of the protocol itself.
Price RM160
33
35.100.80 Local area network
MS ISO 2382 : Part 25 : 1993
Information technology - Vocabulary - Part 25 : Local area
network.
This Malaysian Standard is intended to provide consistency in the
terms and concepts used in the field of local area networks. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationships between the entries.
Price RM40
MS ISO/IEC 8802-2 : 2003 (VOLUME 1-5)
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Specific requirements - Part 2 : Logical link control
This Malaysian Standard provides the specifications of the data link
layer service to network layer protocols to be used in conjunction
with the medium access.
Price RM30
MS ISO/IEC 8802-3 : 2003
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Specific requirements - Part 3 : Carrier sense multiple
access with collision detection (CSMA/CD) access method and
physical layer specifications (First revision)
This Malaysian Standard is intended to encompass several media
types and techniques for signal rates from 1 Mb/s to 1 000 Mb/s.
This Malaysian Standard also provides the necessary specifications
for the following families of systems: a 1 Mb/s base band system, 10
Mb/s base band and broadband systems, a 100 Mb/s base band
system and a 1 000 Mb/s base band system.
Price RM1560
MS ISO/IEC 8802 – 5 : 2003
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Specific requirements - Part 5 : Token ring access
method and physical layer specifications (First revision)
This Malaysian Standard specifies the token ring access method
and physical layer specifications.
Price RM250
MS ISO/IEC 8802-11 : 2003
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Specific requirements - Part 11 : Wireless LAN
medium access control (MAC) and physical layer (PHY)
specifications
This Malaysian Standard specifies the medium access control (MAC)
and pghysical characteristics or wireless local area networks (LANs).
Price RM540
MS ISO/IEC 9594-4 : 2003
Information technology - Open systems interconnection - The
directory: Procedures for distributed operation (First revision)
This Malaysian Standard specifies the behaviour of DSAs taking part
in the distributed Directory application. The allowed has been
designed so as to ensure a consistent service given to a wide
distribution of the DIB across many DSAs.
Price RM120
MS ISO 10160 : 2003
Information and documentation - Open systems interconnection
- Interlibrary - Loan application service definition (First revision)
This Malaysian Standard is an application layer Malaysian Standard
within the open systems interconnection framework defined by MS
ISO 7498. It defines the services or interlibrary Loan.
Price RM80
MS ISO/IEC 10165-6 : 2003
Information technology - Open systems interconnection -
Structure of management information: Requirements and
guidelines for implementation conformance statement
proformas associated with OSI management (First revision)
This Malaysian Standard provides requirements and guidelines for
Management Conformance Summary (MSC) proformas,
Management Information Conformance Statement (MICS) proformas,
Managed Object Conformance Statement (MOCS) proformas and
Management Information Definition Statement (MIDS) proformas.
Price RM50
MS ISO/IEC 10611-4 : 2003
Information technology - International standardised profiles
AMH1n - Message handling systems - Common messaging-Part
4 : AMH12 and AMH14 - MTS access (P3) and MTS 94 access
(P3) (First revision)
This Malaysian Standard covers access to a Message Transfer
System (MTS) using the P3 MTS Access Protocol. These
specifications form part of the Common Messaging applicationn
functions, as defined in the parts of ISO/IEC ISP 10611, which form
a common basis for content type-dependent Malaysian Standardised
Profiles for MHS that will be developed.
Price RM80
MS ISO/IEC 10611-5 : 2003
Information technology - International standardised profiles
AMH1n - Message handling systems - Common messaging -
Part 5 : AMH13 - MS access (P7) (First revision)
This Malaysian Standard covers access to a Message Transfer
System (MTS) using the P7 MTS Access Protocol. These
specifications form part of the Common Messaging application
functions, as defined in the parts of ISO/IEC 10611, which form a
common basis for content type-dependent Malaysian Standardised
Profiles for MHS that will be developed.
Price RM60
MS ISO/IEC 11571 : 2003
Information technology - Telecommunications and information
exchange between systems - Private integrated services
networks – Addressing (First revision)
This Malaysian Standard defines the requirements for the handling
of network addresses for the identification of entities which use or
provide telecommunication services offered by Private Integrated
Services Networks (PISNs).
Price RM30
MS ISO/IEC 11572 : 2003
Information technology - Telecommunications and information
exchange between systems - Private integrated services network
- circuit mode bearer services - Inter-exchange signalling
procedures and protocol (First revision)
This Malaysian Standard defines the signalling procedures and
protocol for the purpose of circuit-switched Call Control at the Q-
reference point between Private Integrated Network Exchanges
(PINXs) connected together within a Private Integrated Services
Network (PISN).
Price RM150
34
MS ISO/IEC 11574 : 2003
Information technology -Telecommunications and information
exchange between systems - Private integrated services network
- Circuit-mode 64 kbit/s bearer services - Service description,
functional capabilities and information flows (First revision)
This Malaysian Standard specifies the service description and control
aspects, including functional capabilities and information flows, of
Malaysian Standard circuit-mode bearer services which may be
supported by a Private Integrated Services Network (PISN).
Price RM100
MS ISO/IEC 15802-2 : 2003
Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Common specifications - Part 2 : LAN/MAN
management
This Malaysian Standard defines an OSI management-compatible
architecture, and services and protocol elements for use in LAN/
MAN environment for performing remote management.
Price RM100
MS ISO/IEC 15802-3 : 2003
Information technology-Telecommunications and information
exchange between systems - Local and metropolitan area
networks - Common specifications - Part 3: Media access control
(MAC) bridges
This Malaysian Standard specifies an architecture and protocol for
the interconnection LANs below the level of the logical link control
protocol.
Price RM380
35.110 Networking
MS ISO/IEC 8802-1 : 1996
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks : Part 1 :
Overview of local area network standards.
This Malaysian Standard provides an introduction to the set of
standards which describe local area networks, specifically those which
make use of the 48-bit address format.
Price RM30
MS ISO/IEC 8802-4 : 1996
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks : Part 4 : Token
passing bus access method and physical layer specifications.
This Malaysian Standard specifies the electrical and/or optical and
physical characteristics of the transmission medium, the electrical or
optical signalling method used, the frame formats transmitted, the
actions of a station upon receipt of a frame etc.
Price RM290
MS ISO/IEC 8802-6 : 1996 (2003)
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks : Part 6 :
Distributed Queue Dual Bus (DQDB) access method and physical
layer specifications.
This Malaysian Standard defines a high-speed shared medium
access protocol for use of a dual, counter-flowing, unidirectional bus
subnetwork.
Price RM390
MS ISO/IEC 8802-7 : 1996
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks : Part 7 : Slotted
ring access method and physical layer specifications.
This Malaysian Standard specifies the requirements for a network
that operates at 10 Mbits/second data rate. Establishes 68 terms
and definitions.
Price RM120
MS ISO/IEC 11579-1 : 1996 (2003)
IT-Telecommunication and information exchange between
systems - Private integrated services network : Part 1 : Reference
configuration for PISN exchanges (PINX) specifications.
This Malaysian Standard specifies PINX reference configuration. The
configuration specifies is not intended to require any specific
implementation of a PINX, but only to provide guidance for the
specification of PINX capabilities.
Price RM20
MS ISO/IEC TR 11802-4 : 1996
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks - Technical
reports and guidelines : Part 4 : Token ring access method and
physical layer specifications - Fibre optic station attachment.
This Malaysian Standard specifies the functional, electrical, optical,
and mechanical characteristics of a fibre optic interface for connecting
a 4- or 16-Mbit/s token ring. Bases upon a fibre optic transmitter, a
channel of multimode graded-index fibres, and a direct-detection
photodiode receiver; and includes signalling provisions for bypass
of the station from the ring and self-test capabilities.
Price RM40
MS ISO/IEC TR 15802-4 : 1996 (2003)
IT-Telecommunication and information exchange between
systems - Local and metropolitan area networks - Common
specifications - Part 4 : System local protocol.
This Malaysian Standard defines a protocol to load the memory of
data processing equipment installed on IEEE 802 networks.
Discusses the LS in only as much detail as is necessary to define
the loading protocol. Provides the PICS proforma for the System
Load Protocol in compliance with the relevant requirements, and in
accordance with the relevant guidance, given in ISO/IEC 9646-2.
Price RM80
35.140 Computer graphics
MS ISO 7942 : 1992
Information processing systems : Computer graphics - Graphical
Kernel Systems (GKS) functional description.
This Malaysian Standard specifies a set of functions for computer
graphics programming, the Graphical Kernel System (GKS). GKS is
a basic graphics system for applications that produce computer
generated two dimensional pictures on line graphics or raster graphics
output devices.
Price RM250
35
MS ISO/IEC 2382-13 : 2005
Information technology – Vocabulary – Part 13 : computer
graphics
This Malaysian Standard is intended to facilitate international
communication in computer graphics. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
information technology and identifies relationships among the entries.
Price RM50
MS ISO 8632 : Part 1 : 1992
Information processing systems computer graphics - Metafile
for storage and transfer of picture description information : Part
1 : Functional specification.
This Malaysian Standard is to provide for the description, storage
and communication of graphical information in a device-independent
manner. This standard is part 1 of a 6-part series on computer
graphics metafile (CGM).
Price RM350
MS ISO 8632 : Part 2 : 1992
Information processing systems computer graphics - Metafile
for storage and transfer of picture description information : Part
2 : Character encoding.
This Malaysian Standard specifies a character encoding of the
computer graphics metafile. For each of the elements specified in
Part 1 an encoding is specified.
Price RM100
MS ISO/IEC 8632-3 : 2003
Information technology - Computer graphics - Metafile for the
storage and transfer of picture description information - Part 3 :
Binary encoding (First revision)
This Malaysian Standard specifies a binary encoding of the computer
Graphics Metafile. For each of the elements specified in ISO/IEC
8632-1, this part specifies an encoding in terms of data types. Price
RM80
MS ISO/IEC 8632-4 : 2003
Information technology - Computer graphics - Metafile for the
storage and transfer of picture description information - Part 4 :
Clear text encoding (First revision)
This Malaysian Standard specifies a clear text encoding of the
Computer Graphics Metafile. For each of the elements specified in
ISO/IEC 8632-1, a clear text encoding in specified. Allowed
abbreviations are specified. The overall format of the metafile and
the means by which comments may be interspersed in the metafile
is specified. Price RM60
MS ISO 8805 : 1992
Information processing systems : Computer graphics - Graphical
Kernel Systems for three Dimensions (GKS-3D) functional
description.
This graphical kernel system for three dimensions (GKS-3D) provides
a set of functions for:
- definition and display of 2D and 3D graphical data;
- storage and manipulation of graphical data;
- input of graphical related data
Price RM380
MS ISO 9592 : Part 1 : 1992
Information processing systems : Computer graphics -
Programmer’s Hierarchical Interactive Graphics System (PHIGS)
: Part 1 : Functional description.
This Malaysian Standard specifies a set of functions for computer
graphics programming, the Programmer’s Hierarchical Interactive
Graphics System (PHIGS). PHIGS is a graphics system for
application programs that produce computer generated pictures on
line graphics or raster graphics output devices. It supports operator
input and interactions by supplying basic functions for graphical input
and hierarchical picture definition.
Price RM380
MS ISO 9592 : Part 2 : 1992
Information processing systems : Computer graphics -
Programmer’s Hierarchical Interactive Graphics System (PHIGS)
: Part 2 : Archive file format.
This Part of MS ISO 9592 specifies a file formats suitable for the
storage and retrieval of PHIGS structures in a way that is compatible
between systems of different architectures and implementations
supporting different programming languages.
Price RM10
MS ISO 9592 : Part 3 : 1992
Information processing systems : Computer graphics -
Programmer’s Hierarchical Interactive Graphics System (PHIGS)
: Part 3 : Clear-text encoding or archive file.
This Part of MS ISO 9592 specifies a Clear-Text Encoding of the
PHIGS archive file. For each of the archive file elements specified in
MS ISO 9592-2, a clear text encoding is specified.
Price RM40
MS ISO/IEC 9592-4 : 1996
IPS-Computer Graphics - Programmers Hierarchical Interactive
Graphics Systems (PHIGS) : Part 4 : PHIGS PLUS, and TC 1 : 94.
This Malaysian Standard specifies an additional set of functionality
of the PHIGS intended to satisfy basic application requirements in
the areas of lighting and shading and defines additional primitives
and functionally for controlling the rendering of 3D objects.
Price RM190
MS ISO/IEC 9593 : Part 1 : 1993
Information processing system - Computer graphics -
Programmer’s Hierarchical Interactive Graphics Systems
(PHIGS) languages bindings - Part 1 : FORTRAN.
This Malaysian Standard defines a standard binding for the
FORTRAN computer programming language to be used with the
PHIGS.
Price RM230
MS ISO/IEC 9593 : Part 4 : 1993
Information technology - Computer graphics - Programmer’s
Hierarchical Interactive Graphics Systems (PHIGS) languages
bindings - Part 4 : C.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system. Price RM320
MS ISO/IEC 9636 : Part 1 : 1993
Information technology - Computer graphics - Interfacing
techniques for dialogues with graphical devices (CGI) -
Functional specification : Part 1 : Overview, profiles and
conformance.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system.
Price RM90
MS ISO/IEC 9636 : Part 2 : 1993
Information technology - Computer graphics - Interfacing
techniques for dialogues with graphical devices (CGI) -
Functional specification : Part 2 : Control.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system, specifically with virtual device management, coordinate space
control, and error control.
Price RM50
MS ISO/IEC 9636 : Part 3 : 1993
Information technology - Computer graphics - Interfacing
techniques for dialogues with graphical devices (CGI) -
Functional specification : Part 3 : Output.
This Malaysian Standard specifies a standard interface between
36
device-independent and device-dependent parts of a graphics
system, specifically, to describe the functions needed for generating
and displaying graphical output.
Price RM160
MS ISO/IEC 9636 : Part 4 : 1993
Information technology - Computer graphics - Interfacing
techniques for dialogues with graphical devices (CGI) -
Functional specification : Part 4 : Segment.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system, specially, to describe the segments.
Price RM50
MS ISO/IEC 9636 : Part 5 : 1993
Information technology - Computer graphics - Interfacing
technique for dialogues with graphical devices (CGI) - Functional
specification : Part 5 : Input and echoing.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system, specifically, to describe INPUT or OUTING virtual devices
from which graphical and non-graphical inputs can be obtained.
Price RM100
MS ISO/IEC 9636 : Part 6 : 1993
Information technology - Computer graphics - Interfacing
techniques for dialogues with graphical devices (CGI) -
Functional specification : Part 6 : Raster.
This Malaysian Standard specifies a standard interface between
device-independent and device-dependent parts of a graphics
system, specifically, to describe raster graphic specific device.
Price RM50
MS ISO/IEC 9637-1 : 1996 (2003)
IT - Computer Graphics - Interfacing techniques for dialogues
with graphical devices (CGI) - Data stream binding : Part 1 :
Character encoding.
This Malaysian Standard specifies a character encoding of the
computer graphics interface. For each of the functions specified in
ISO/IEC 9636 an encoding is specified. The encoding provides a
highly compact representation of the data, suitable for applications
that require the data to be of minimum size and suitable for
transmission with character - oriented transmission services.
Price RM80
MS ISO/IEC 9637-2 : 1996 (2003)
IT - Computer Graphics - Interfacing techniques for dialogues
with graphical devices (CGI) - Data stream binding : Part 2 :
Binary encoding.
This Malaysian Standard is for each of the function syntaxes in
clauses 5 and 6 of ISO/IEC 9636-2 to 9636-6, an encoding is specified
in terms of an opcode and a sequence of parameters of specified
data types. For each of these data types, an explicit representation
in terms of bits, 8-bit and 16-bit entities is specified. This binary
encoding will, in many circumstances, reduce the effort required to
generate and interpret the data stream as compared to other
encodings.
Price RM90
MS ISO/IEC 10641 : 1996
IT - Computer graphics and image processing - Procedures for
registration of graphical items.
This Malaysian Standard specifies a general framework addressing
the following six components : conformance in the standard itself;
test requirements document (defining what shall be tested for a
computer graphics standard); test specifications document
(addressing the test technique and the content of each test); test
method (defining the implementation of the test specification
document, including the test software); test procedures (defining the
application of the test software, which consists of the procedures
to be used in conformance testing); the establishment of test ser-
vices. Is applicable to all standards within the scope of the ISO/IEC
JTC 1 subcommittee responsible for computer graphics and image
processing.
Price RM40
MS ISO/IEC 12087-2 : 1996
IT - Computer graphics and image processing - Conformance
testing of implementation of graphics standards (RA).
This Malaysian Standard establishes the specification of the
application program interface (API), called the Programmer’s Imaging
Kernel System (PIKS). PIKS is intended to provide a rich set of both
low-level and high-level services on image and image-derived data
objects. These services can be used as building blocks for a broad
range of common imaging applications. Lists are included containing
a summary of technological capabilities provided by PIKS and not
provided by PIKS. It should be noted that PIKS functionality maybe
useful as a pre-processor or co-processor for many of the
technologies in the ‘Not provided by PIKS” list.
Price RM970
MS ISO/IEC 14478-1 : 2003
Information technology – Computer graphics and image
processing – Presentation Environment for Multimedia Objects
(PREMO) – Part 1: Fundamentals of PREMO
This Malaysian Standard specifies techniques for supporting
interactive single, and multiple media applications which recognise
and emphasise the interrelationships among user interfaces,
multimedia applications, and multimedia information interchange.
Price RM50
MS ISO/IEC 14478-2 : 2003
Information technology – Computer graphics and image
processing – Presentation Environment for Multimedia Objects
(PREMO) – Part 2: Foundation component as a Malaysian
Standard
This Malaysian Standard lists an initial set of object types and non-
object types useful for the construction of, presentation of, and
interaction with multimedia information.
Price RM80
MS ISO/IEC 14478-3 : 2003
Information technology – Computer graphics and image
processing – Presentation Environment for Multimedia Objects
(PREMO) – Part 3: Multimedia systems services
This Malaysian Standard defines a standard set of multimedia system
services that can be used by multimedia application developers in a
variety of computing environments. The focus is on enabling
multimedia applications in a heterogeneous, distributed computing
environment. Price RM90
MS ISO/IEC 14478-4 : 2003
Information technology – Computer graphics and image
processing - Presentation Environment for Multimedia Objects
(PREMO) – Part 4: Modelling, rendering and interaction
component
This Malaysian Standard describes a set of object types and non-
object types to provide the construction of, presentation of, and the
interaction with multimedia information. The multimedia information
can be graphics, video, audio, or other types of presentable media.
Price RM90
37
MS IEC 60796 : Part 1 : 1993
Microprocessor system bus 8-bit and 16-bit (Multi Bus 1) : Part
1 : Functional description with electrical and timing specification.
This Malaysian Standard is one of the series which deals with the
electrical and mechanical interfaces to allow various microprocessor
system components to interact with each other.
Price RM60
MS IEC 60796 : Part 2 : 1993
Microprocessor system bus 8-bit and 16-bit (Multi Bus 1) : Part
2 : Mechanical and pin descriptions for the system bus
configuration specifications with edge connectors (direct).
This Malaysian Standard is one of the series which deals with the
electrical and mechanical interfaces to allow various microprocessor
system components to interact with each other. It is applicable to an
interface used to connect microprocessor system components by
means of the edge connector (direct) type backplane.
Price RM30
MS IEC 60796 : Part 3 : 1993
Microprocessor system bus 8-bit and 16-bit (Multi Bus 1) : Part
3 : Mechanical and pin descriptions for the urochord
configuration with pin and socket (indirect) connectors.
This Malaysian Standard is one of the series which deals with the
electrical and mechanical interfaces to allow various microprocessor
system components to interact with each other. It is applicable to an
interface used to connect microprocessor system components by
means of the pin and socket (indirect) connector type back plane.
Price RM20
MS IEC 60821 : 1992
Information technology IEC 821 Vmebus - Microprocessor
systems bus for 1 Byte to 4 byte data.
This Malaysian Standard specifies a high performance back plan
bus for use in microcomputer systems that employ single or multiple
microprocessors.
Price RM290
MS IEC 60822 : 1993
VSB Parallel Sub-System Bus of the IEC 821 VMEbus.
This Malaysian Standard specifies the VME sub-system bus.
Price RM160
MS IEC 60823 : 1993
Microprocessor system bus (VMS bus) - Serial sub system bus
of the IEC 821 bus (VMEbus).
This Malaysian Standard describes an interfacing method used to
connect boards within a subrace, and an extended interfacing method
used to connect subraces and standalone boards over limited
distance.
Price RM160
MS IEC 60828 : 1993
Pin allocations for microprocessor systems using the IEC 603-
2 connector.
This Malaysian Standard describes the minimum number of d.c.
ground terminals to be allocated to each IEC 603-2 connector used
in microprocessor-based systems.
Price RM20
35.160 Microprocessor systems
MS 1299 : 1992
Data communication over Public Switched Telephone Network
(PSTN) CCITT V-series recommendations.
This Malaysian Standard describes the recommendation for data
communication over the telephone.
Price RM10
MS ISO/IEC 2382-19 : 2005
Information technology – Vocabulary – Part 19 : Analog
computing
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM20
MS ISO/IEC 2382-22 : 2005
Information processing systems – Vocabulary – Part 22 :
Calculators
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM30
MS ISO 6951 : 1994
Information processing - Processor system bus interface
(Eurobus A).
This Malaysian Standard specifies a processor system bus interface
known as Eurobus A (referred to in the following text as “the bus”)
that is one of a family of interfaces for use in modular data acquisition,
processing communication and control systems for military, industrial
and other applications.
Price RM70
MS ISO/IEC 11458 : 1996
Information technology - Microprocessor systems - VICbus-
Inter-carte cable bus.
This Malaysian Standard specifies the widespread use of high-
performance, multi-processor systems based on backplane buses
such as the IEC 821 bus (VMEbus), has inevitably led to the
requirement to create multi-crate (-subrack, -chassis, etc.) system.
The VICbus inter-crate cable bus is designed to achieve such
assemblies such assemblies in a standard way. VICbus, a
multiplexed, multi-master, multi-slave cable bus, connects multiple
backplane buses or stand-alone devices, providing transparent,
software less interconnection for low latency short data transactions
and fast transmission of data blocks over cables of up to 100 m in
length.
Price RM110
MS ISO/IEC 13213 : 1996 (2003)
IT - Microprocessor systems - Control and status register (CSR)
architecture for microcomputer buses.
This Malaysian Standard defines the address-space maps, the bus
transaction sets, and the node’s CSRs. Includes the format and
content of the configuration ROM on the node providing the
parameters necessary to auto configure systems with nonprocessor
nodes provided by multiple vendors. The annexes provide
background for understanding the usage of this CSR Architecture
specification.
Price RM150
38
MS IEC 60975 : 1993
Microprocessor universal format for object modules.
This Malaysian Standard specifies the format of linkable, reloca table,
and absolute object modules for binary computers of arbitrary word
size and architecture. Two levels of compliance are specified,
minimum and full.
Price RM40
35.180 IT terminal and other peripheral
equipment
MS ISO/IEC 2382-12 : 2005
Information processing systems – Part 12 : Peripheral equipment
This Malaysian Standard is intended to facilitate international
communication in information processing. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information processing and identifies relationships between
the entries.
Price RM50
MS ISO 9241-1 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 1 : General introduction
This Malaysian Standard introduces the multipart standard on
ergonomic requirements for the use of visual display terminals for
office tasks; provides guidelines for user-performance approach; gives
an overview of all parts of MS ISO 9241 currently published and of
anticipated content of those in preparation; provides some guidance
on how to use MS ISO 9241; describes how conformance to MS ISO
9241 should be reported.
Price RM20
MS ISO 9241-2 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 2 : Guidance on task requirements.
This Malaysian Standard provides guidelines to users of VDT-based
information processing systems with reference to office tasks. This
guidance is relevant to both the organization implementing the system
and the people using the equipment. The guidance should be applied
in accordance with local, regional or national agreements and
regulations.
Price RM10
MS ISO 9241-3 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 3 : Visual display requirements
This Malaysian Standard establishes image quality requirements for
the design and evaluation of single and multi-colour VDTs. The
requirements are stated as performance specifications and the
evaluations provide test methods and conformance measurements.
It should be noted that, at present the recommendations are based
on Latin, Cyrillic and Greek origin alphabetic characters and Arabic
numerals.
Price RM60
MS ISO 9241-4 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 4 : Keyboard requirements.
This Malaysian Standard applies to linear detachable keyboards
designed for stationary use. It provides guidance on the design of
keyboards used for typical office tasks so that the limitations and
capabilities of users are considered. It provides guidance based on
ergonomic factors for keyboard layout arrangements, and the physical
characteristics of the individual keys and the overall design of the
housing containing the keys.
Price RM40
MS ISO 9241-5 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 5 : Workstation layout and postural
requirements.
This Malaysian Standard specifies ergonomic guiding principles which
apply to the user requirements, design and procurement of
workstation equipment for office tasks using VDTs.
Price RM40
MS ISO 9241-6 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 6 : Guidance on the work environment
This Malaysian Standard guidance on basic principles for the
ergonomic design of the work environment and the workstation, taking
into account lighting, effect of noise and mechanical vibrations,
electrical and magnetic fields and tstatic electricity, thermal
environment, space organization and workplace layout.
Price RM40
MS ISO 9241-7 : 2005
Ergonomic requirements for office work with visual display
terminal (VDTs) – Part 7 : Requirement for display with reflections
This Malaysian Standard establishes image quality requirements for
VDTs used in luminous environments that may cause reflections from
the screen. The requirements are stated as performance or design
specifications and test methods are provided.
Price RM40
MS ISO/IEC 9995-1 : 2001
Information technology - Keyboard layouts for text and office
systems - Part 1 : General principles governing keyboard layouts
This Malaysian Standard specifies various characteristics of
keyboards used by ITE e.g.
a) personal computers, workstations, computer terminals,
VDTs (visual display terminals), typewriters, etc, having an
alphanumeric keyboard;
b) calculators, telephones and automated teller machines
having a numeric keypad.
The keyboard defined in this Standard is the conventional linear
keyboard, which is physically divided into sections and the sections
into zones within which the keys are laid out.
Price RM20
35.200 Interface and interconnection
equipment
MS ISO/IEC 2382-21 : 2005
Data processing – Vocabulary – Part 21 : Interfaces between
process computer systems and technical processes
This Malaysian Standard is intended to facilitate international
communication in data processing. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
data processing and identifies relationships between the entries.
Price RM20
MS ISO/IEC 12075 : 1996 (2003)
IT-Customer premises cabling - Planning and installation guide
to support ISO/IEC 8802-5 token ring stations
The purpose of this Malaysian Standard is to supplement the token
ring standard ISO/IEC 8802-5. Therefore, includes a description and
recommended values of characteristics of the appropriate elements
within a token ring network, the cabling system topology with
recommended distances, transmission requirements of suit able
medium for 4 and 16 Mbit/s token rings, guidelines for the design,
planning and installation of cabling systems to support 4 and 16 Mbit/
s token rings, guidance on documentation and labelling to support
token rings. All cabling recommendations specifically refer to using
150 Ω shielded twister pair lobe cabling.
Price RM50
39
MS ISO/IEC 7816-8 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 8: Security related inter
industry commands
This Malaysian Standard does not cover the internal implementation
within the card and/or the outside world.
Price RM40
MS ISO/IEC 7816-9 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 9 : Additional inter industry
commands and security attributes.
This Malaysian Standard specifies: a description and coding of the
life cycle of cards and related objects; a description and coding of
security attributes of card related objects; functions and syntax of
additional inter industry commands; data elements associated with
these commands; and a mechanism for initiating card-originated
messages. This part of MS ISO 7816.
Price RM40
MS ISO/IEC 7618-10 : 2003
Information technology – Identification cards –
integrated circuit(s) cards with contacts – Part 10
:Electronic signals and answer to reset for
synchronous cards.
This part of MS 7816 specifies the power, signal
structures, and the structure for the answer to reset
between an integrated circuit(s) card with synchronous
transmission and an interface device such as a
terminal.
Price RM20
35.220.20 Magnetic storage devices in
general
MS ISO 1001 : 1994
Information processing - File structure and labelling of magnetic
tapes for information interchange.
This Malaysian Standard specifies the file structure and labelling of
magnetic tapes for the interchange of information between users of
information processing systems.
The standard specifies:
- volume and file structure;
- basic characteristics of the blocks containing the records
constituting the file;
- recorded labels identifying files, file sections and volume of
magnetic tapes;
- four nested levels of interchange.
Price RM30
MS ISO 1860 : 1994
Information processing - Precision reels for magnetic tape used
in interchange instrumentation applications.
This Malaysian Standard specifies the recorded/reproducer interface
or envelope requirements for metal-and-glass-flanged precision reels
with 76 mm (3 in) centrehole, for magnetic tape used in interchange
instrumentation applications. Price RM20
35.220.01 Data storage devices in general
MS 1098 : 1987
Safe storage and handling information cards for dangerous
goods.
Summaries emergency procedures for dealing with leaks, spills and
fire situations. First aid instructions and relevant dangerous goods
labels HAZCHEM, UN numbers of substances and National Fire
Protection Association (NFPA) codes are also includes.
Price RM10
35.240.15 Identification cards and related
devices
MS ISO/IEC 7816-1 : 2003
Identification cards – Integrated circuit(s) cards with contacts –
Part 1 : Physical characteristics (First revision).
This Malaysian Standard is identical with ISO/IEC7816-1 : 1988. This
Malaysian Standard specifies the physical characteristics of integrated
circuit(s) cards with contacts. It applies to identification cards of the
ID-1 card type which may include embossing and/or a magnetic stripe
as specified in MS ISO/IEC 7811-1 to MS ISO/IEC 7811-6. This
Malaysian Standard replaces MS ISO 7816-1 : 1995.
Price RM20
MS ISO/IEC 7816-2 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 2 : Dimensions and location
of the contacts (First revision).
This Malaysian Standard is identical with ISO/IEC 7816-2 : 1999.
This Malaysian Standard specifies the dimensions, locations and
assignment for each of the contacts on integrated circuit(s) cards of
an ID-1 card type. This Malaysian Standard replaces MS ISO 7816-
2 : 1995.
Price RM20
MS ISO/IEC 7816-3 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 3 : Electronic signals and
transmission protocols (First revision).
This Malaysian Standard is identical with ISO/IEC 7816-3 : 1997.This
Malaysian Standard specifies the power and signal structures, and
information exchange between an integrated circuit(s) card and an
interface device such as a terminal. This Malaysian Standard replaces
MS ISO 7816-3 : 1995.
Price RM40
MS ISO/IEC 7816-5 : 2003
Identification cards – Integrated circuit(s) cards with contacts –
Part 5 : Numbering system and registration procedure for
application identifiers (First revision)
This Malaysian Standard is identical with ISO/IEC 7816-5 : 1994.This
Malaysian Standard specifies a numbering system for application
identifiers and a registration procedure for application provider
identifiers. This Malaysian Standard replaces MS ISO 7816 : Part 5
: 1995. Price RM20
40
MS ISO 1863 : 1994
Information processing - 9-track, 12.7mm (0.5 in) wide magnetic
tape for information interchange recorded at 32 rpmm (800 rpi).
This Malaysian Standard provides a format and recording standard
for 9-track, 12.7mm (0.5 in) wide magnetic tape and reels to be used
for information interchange among information processing systems,
communication systems, and associated equipment utilizing the 7-
bit coded character set specified in MS ISO 646 or its 7-bit or 8-bit
extensions specifies in MS ISO 2022.
Price RM10
MS ISO 1864 : 1994
Information technology - Unrecorded 12.7 mm (0.5 in) wide
magnetic tape for information interchange - 32 ftpmm (800 ftpi),
NRZI, 126 ftpmm (3200 tpi) phase encoded and 356 ftpmm (9042
ftpi) NRZI.
This Malaysian Standard applies solely to magnetic tape for digital
recording using the NRZI method of recording at 32 ftpmm and 35
ftpmm (800 ftpi and 9042 ftpi) or the phase-encoded method of
recording at 126 ftpmm (3200 ftpi) in which the direction of
magnetization is nominally longitudinal.
Price RM10
MS ISO/IEC 3788 : 1994
Information processing - 9-track, 12.7 mm (0.5 in) wide magnetic
tape for information interchange using phase encoding at 126
ftpmm (3200 ftpi) - 62 cpmm (1600 cpi).
This Malaysian Standard specifies a format and recording standard
for 9-track, 12.7 mm (0.5 in) magnetic tape to be used for data
interchange between information processing systems, communication
systems and associated equipment utilizing the 7-bit coded character
set (see ISO 646), its extension in ISO 2022 where required, or an 8-
bit coded character set (see ISO 4873). This standard was adopted
from the standard ISO/IEC 3788 : 1990 with the same title.
Price RM20
MS ISO 4057 : 1994
Information processing - Data interchange on 6.30 mm (0.25 in)
magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded.
This Malaysian Standard specifies characteristics of a 6.30 mm (0.25
in) magnetic tape cartridge intended for data interchange and physical
interchangeability between information processing systems utilizing
ISO 7-bit coded character sets (ISO 646), its extension (ISO 2022)
and/or the 8-bit coded character set (ISO 4873). The cartridge is of
the twin-hub copolymer type, loaded with a 6.30 mm (0.25 in)
magnetic tape for digital recording using the 63 bpmm (1600 bpi)
phase-encoding method.
Price RM40
MS ISO 4341 : 1994
Information processing - Magnetic tape cassette and cartridge
labelling and file structure for information interchange.
This Malaysian Standard specifies file structure for data interchange
on magnetic tape cassettes. To provide for the range of sophistication
in equipment and applications, three systems are specified:
(a) the basic systems, employing only hardware-defined
separators to structure the files;
(b) the compact systems, employing special data blocks with
information content (labels), which are capable of being
recorded using only numeric equipment;
(c) the extended system, employing the magnetic tape
labelling system specifies in ISO 1001 together with new
labels, to define a more comprehensive labelling system.
This standard was adopted from the standard ISO 4341 : 1978 with
the same title.
Price RM20
MS ISO 5652 : 1994
Information processing - 9-track 12.7 mm (0.5 in) wide magnetic
tape information interchange - Format and recording using group
coding at 246 cpmm (6250 cpi).
This Malaysian Standard specifies a format and standard recording
for 9-track, 12.7 mm (0.5 in) magnetic tape to be used for data
interchange between information processing systems, communication
systems and associated equipment utilizing the 7-bit coded character
set (see ISO 646), its extensions in ISO 2022 where required, and
the 8-bit coded character set (see ISO 4873).
Price RM30
MS ISO 6098 : 1994
Information processing - Self loading cartridges for 12.7 mm
(0.5 in) wide magnetic tape.
This Malaysian Standard specifies mechanical and functional
interchangeability requirements for self-loading cartridges, to be used
with reels of 12.7 mm (0.5 in) wide magnetic tape specified in ISO
1864.
Price RM20
MS ISO/IEC/TR 6371 : 1994
Information processing - Interchange practices and test methods
for unrecorded instrumentation magnetic tape.
This Malaysian Standard specifies the interchange requirements for
longitudinally-oriented, unrecorded magnetic tape wound on reels
or hubs designed for use in instrumentations-recording applications.
Tapes for interchange shall be recorded and played back on
equipment conforming to ISO 6068 and to the applicable instructions
furnished by the equipment manufacturer. This standard was adopted
from the standard ISO/IEC TR 6371 : 1989 with the same title.
Price RM30
MS ISO 6596 : Part 1 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using two-frequency recording at 7958
ftprad, 1.9 tpmm (48 tpi), on one side : Part 1 : Dimensional,
physical and magnetic characters.
This 2-part series Malaysian Standard specifies the characteristics
of 130 mm (5.25 in) flexible disk cartridges recorded at 7958 ftprad
on one side using two-frequency recording.
Part 1 - specifies the dimensional, physical and magnetic
characteristics of the cartridge, so as to provide physical
interchangeability between data processing systems.
Price RM20
MS ISO 6596 : Part 2 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using two-frequency recording at 7958
ftprad, 1.9 tpmm (48 tpi), on one side : Part 2 : Track format.
Part 2 - specifies the magnetic characteristics, the layout and a track
format.
Price RM20
MS ISO/ IEC 7487 : Part 1 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad, 1.9 tpmm (48 tpi), on both sides : Part
1 : Dimensional, physical and magnetic characteristics.
This 3-part series Malaysian Standard specifies the characteristics
of 130 mm (5.25 in) flexible disk cartridges recorded at 7958 ftprad,
1.9 tpmm (48 tpi), on both side using modified frequency modulation
recording. Part 1 - specifies the dimensional, physical and magnetic
characteristics of the cartridge.
Price RM20
41
MS ISO 7487 : Part 2 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad, 1.9 tpmm (48 tpi), on both sides : Part
2 : Track format A.
Part 2 - specifies the quality of recorded signals, the track layout,
and a track format to be used on such a flexible disk cartridge.
Price RM20
MS ISO 7487 : Part 3 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad, 1.9 tpmm (48 tpi), on both sides : Part
3 : Track format B.
Part 3 - specifies the quality of recorded signals, the track layout,
and a track format to be used on 130 mm (5.25 in) flexible cartridges.
Price RM10
MS ISO 7665 : 1994
Information processing - File structure and labelling of flexible
disk cartridges for information interchange.
This Malaysian Standard specifies:
(a) recorded labels to identify files, file sections, and volumes of
flexible disk cartridges;
(b) basic characteristics of the blocks containing the records
constituting the files;
(c) the file structure
Price RM30
MS ISO 7929 : 1994
Information processing - Magnetic disk for data storage devices
- 83000 flux transitions per track, 130 mm (5.12 in) outer diameter,
40 mm (1.57 in) inner diameter.
This Malaysian Standard specifies the mechanical, physical and
magnetic characteristics of a lubricated magnetic disk of 130 mm
(5.12 in) outer diameter and 40 mm (1.57 in) inner diameter intended
for mounting in data storage devices.
Price RM20
MS ISO 8063 : Part 1 : 1994 (2005)
Information processing - Data interchange on 6.30 mm (0.25 in)
wide magnetic tape cartridge using IMFM recording at 252 ftpmm
(6400 ftpi) : Part 1 : Mechanical, physical and magnetic
properties.
This Malaysian Standard specifies the characteristics of a tape
cartridge using 6.30 mm (0.25 in) wide magnetic tape for data
interchange between data processing systems.
Part 1 - specifies the dimensional, physical and magnetic
characteristics of the cartridge, and the track layout.
Price RM40
MS ISO 8063 : Part 2 : 1994 (2005)
Information processing - Data interchange on 6.30 mm (0.25 in)
wide magnetic tape cartridge using IMFM recording at 252 ftpmm
(6400 ftpi) : Part 2 : Track format and method of recording for
data interchange in start/stop mode.
Part 2 - specifies the quality signals, and the track format to be used
on a 6.30 mm (0.25 in) magnetic tape cartridge recorded at 252 ftpmm
(6400 ftpi) using IMFM recording and the start/stop mode of operation.
Price RM10
MS ISO 8064 : 1994 (2005)
Information processing - Reels for 12.7 mm (0.5 in) wide
magnetic tapes-sizes 16, 18 and 22.
This Malaysian Standard specifies the characteristics of three sizes
of reels for 12.7 mm (0.5 in) wide magnetic tape to allow physical
interchangeability of such reels. The sizes are size 16, size 18 and
size 22. Their dimensions differ only in the overall diameter of their
flanges. All other requirements of this standard apply equally to all
three sizes.
Price RM20
MS ISO 8378 : Part 1 : 1994 (2005)
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad, 3.8 tpmm (96 tpi), on both sides : Part
1 : Dimensional, physical and magnetic characteristics.
These Malaysian Standards specifies the characteristics of 130 mm
(5.25 in) flexible disk cartridges recorded at 7958 ftprad, 3.8 tpmm
(96 tpi), using modified frequency modulation (MFM) recording on
80 tracks on each side.
Part 1- specifies the dimensional, physical and magnetic
characteristics of the cartridge so as to provide physical
interchangeability between data processing systems.
Price RM20
MS ISO 8378 : Part 2 : 1994 (2005)
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad, 3.8 tpmm (96 tpi), on both sides : Part
2 : Track format A.
Part 2- specifies the quality of recorded signals, the track layout, and
a track format to be used on 130 mm (5.25 in) flexible disk cartridges.
Price RM20
MS ISO 8378 : Part 3 : 1994 (2005)
Information processing - Data interchange on 130 mm (5.25
in) flexible disk cartridge using modified frequency
modulation recording at 7958 ftprad, 3.8
tpmm (96 tpi), on both sides : Part 3 : Track format B.
Part 3- specifies the quality of recorded signals, the track layout,
and a track format to be used on 130 mm (5.25 in) flexible disk
cartridges.
Price RM20
MS ISO 8462 : Part 1 : 1994 (2005)
Information processing - Data interchange on 6.30 mm (0.25 in)
magnetic tape cartridge using GCR recording at 394 ftpmm
(10,000 ftpi), 39 cpmm (1,000 cpi) : Part 1 : Mechanical, physical
and magnetic properties.
This Malaysian Standards specify the characteristics of a tape-
cartridge loaded with magnetic tape 6.30 mm (0.25 in) wide intended
for digital recording at physical recording densities of 252 ftpmm
(6,400 ftpi) and 394 ftpmm (10,000 cpi). Part 1 - specifies the
mechanical, physical and magnetic properties of a 6.30 mm (0.25 in)
wide magnetic tape cartridge and methods for testing the surface
quality of the tape.
Price RM50
42
MS ISO 8462 : Part 2 : 1994 (2005)
Information processing - Data interchange on 6.30 mm (0.25 in)
magnetic tape cartridge using GCR recording at 394 ftpmm
(10,000 ftpi), 39 cpmm (1,000 cpi) : Part 2 : Streaming mode.
Part 2 - specifies a recording method and a data format intended for
use in the streaming mode of operation. Two alternative track formats
are specified:
- a 4-track format; and
- a 9-track format.
Price RM20
MS ISO 8630 : Part 1 : 1994 (2005)
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridges using modified frequency modulations
recording at 13,262 ftprad, on 80 tracks on each side : Part 1 :
Dimensional, physical and magnetic characteristics.
This Malaysian Standards specify the characteristics of 130 mm (5.25
in) flexible disk cartridges recorded at 13,262 ftprad using modified
frequency modulation (MFM) recording, on 80 tracks on each side.
Part 1 - specifies the dimensional, physical and magnetic
characteristics of the cartridge.
Price RM30
MS ISO 8630 : Part 2 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridges using modified frequency modulations
recording at 13,262 ftprad, on 80 tracks on each side : Part 2 :
Tracks A for 77 tracks.
Part 2 - specifies the quality of recorded signals, the track layout,
and a track format to be used on 130 mm (5.25 in) 13,262 ftprad
flexible disk cartridges.
Price RM20
MS ISO 8630 : Part 3 : 1994
Information processing - Data interchange on 130 mm (5.25 in)
flexible disk cartridges using modified frequency modulations
recording at 13,262 ftprad, on 80 tracks on each side : Part 3 :
Track for B for 80 tracks.
Part 3 - specifies the quality of recorded signals, the track layout,
and a track format to be used on 130 mm (5.25 in) 13,262 ftprad
flexible disk cartridges.
Price RM20
MS ISO 8860 : Part 1 : 1994
Information processing - Data interchange on 90 mm (3.5 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad on 80 tracks on each side : Part 1 :
Dimensional, physical and magnetic characteristics.
This Malaysian Standard specify the characteristics of 90 mm (3.5
in) flexible disk cartridges recorded at 7958 ftprad using notified
frequency modulation (MFM) recording on 80 tracks each side. Part
1 - specifies the dimensional, physical and magnetic characteristics
of the cartridge.
Price RM30
MS ISO 8860 : Part 2 : 1994
Information processing - Data interchange on 90 mm (3.5 in)
flexible disk cartridge using modified frequency modulation
recording at 7958 ftprad on 80 tracks on each side : Part 2 :
Track format .
Part 2 - specifies the track layout, the track format and the
characteristics of the unrecorded signals.
Price RM20
MS ISO/IEC 9293 : 1994
Information processing - Volume and file structure of flexible
disk cartridges for information interchange.
This Malaysian Standard specifies the location files or information
on flexible disk cartridge, and also specifies a set of recorded
descriptors which identifies: - the files which may be interchanged; -
the locations of the files; - the attributes of the files; - the location of
used space for recording on the FDC; - the location of defective
recording space on the FDC; - the attributes of the FDC and of the
description recorded on it.
Price RM40
MS ISO/IEC 9529 : Part 1 : 1994
Information processing systems - Data interchange on 90 mm
(3.5 in) flexible disk cartridges using modified frequency/
frequency modulation recording at 15 916 ftprad, on 80 tracks
on each side. Part 1 : Dimensional, physical and magnetic
characteristics.
This Malaysian Standard is part 1 of 2 - parts series. This part of the
standard specifies the dimensional, physical and magnetic
characteristics of the cartridge, so as to provide physical
interchangeability between data processing units.
Price RM40
MS ISO/IEC 9529 : Part 2 : 1994
Information processing systems - Data interchange on 90 mm
(3.5 in) flexible disk cartridges using modified frequency/
frequency modulation recording at 15 916 ftprad, on 80 tracks
on each side. Part 2 : Track format.
This Part of the Malaysian Standard specifies the track layout, track
format and the characteristics of the recorded signals.
Price RM20
MS ISO 9661 : 1994
Information processing - Data interchange on 12.7 mm wide
magnetic tape cartridges - 18 tracks, 1491
data bytes per millimetre (37871 data bytes per inch).
This Malaysian Standard specifies the physical and magnetic
characteristics of 12.7 mm wide; 18-track magnetic tape cartridges
to enable interchangeability of such cartridges. It also specifies a
format and recording method thus allowing, together with MS ISO
1001 for magnetic tape labelling, full data interchange by means of
such magnetic tape cartridges.
Price RM60
MS ISO/IEC 9983 : 2004
Information technology – Designation of unrecorded flexible
disk cartridges (First revision)
This standard specifies an identifier to appear on each flexible disk
cartridge (FDC) and the minimum information to appear on packages
of unrecorded flexible disk cartridges. The information according to
this standard shall appear on cartridges and on packages of
unrecorded flexible disk cartridges available to end users. Drives for
FDCs should bear the indication of the Type(s) of FDC they can
handle. Manuals for drives and systems should also include this
Information
Price RM20
35.220.30 Optical storage devices
MS ISO 9171 : Part 1 : 1994
Information Technology - 130 mm optical disk cartridge, write
once, for information interchange : Part 1 : Unrecorded optical
disk cartridge.
This Malaysian Standard is Part 1 of a 2 -arts series. this part of the
standards specifies: - definitions of essential concepts; - the
environments in which the characteristics are to be tested; - the
environments in which the cartridge is to be operated and stored; -
the mechanical, physical and dimensional characteristics of the case
and of the optical disk; - the optical characteristics and the recording
characteristics for recording the information once and for reading it
many times, so as to provide physical interchangeability between
data processing systems.
Price RM40
43
MS ISO 9171 : Part 2 : 1994
Information technology - 130 mm optical disk cartridge, write
once, for information interchange : Part 2 : Recording format.
This Part of the Malaysian Standard specifies two formats for the
physical disposition of the tracks and sectors, the error correction
codes, the modulation methods used for recording the quality of the
recorded signals.
Price RM60
MS ISO 9660 : 1994
Information processing - Volume and file structure of CD ROM
for information interchange.
This Malaysian Standard specifies the volume and file structure of
compact ready only optical disks (CD-ROM) for the interchange of
information between users of information processing systems. This
standard was adopted from the standard ISO 9660 : 1988 with the
same title.
Price RM40
MS ISO/IEC 10149: 2004
Information technology - Data interchange on read-only 120 mm
optical data disks (CD-ROM) (First revision)
This standard specifies the characteristics of 120 mm Optical disks
for information interchange between information processing Systems
and for information storage, called CD-ROM. The optical disk specified
by this standard is of the type in which the information is recorded
before delivery to the User and can only be read from the disk. It
specifies: some definitions, the environments in which the
characteristics of the disk shall be tested and the environments in
which it shall be used and stored, the mechanical, physical and
dimensional characteristics of the disk, the recording characteristics,
the format of the tracks, the error-detecting and the error-correcting
characters, and the coding of the information, the optical
characteristics for reading the information.
Price RM50
35.240 Applications of information
technology
MS 1773: 2004
Electronic Business XML Message Service (ebMS) -
Specification version 2.0
The Eletronic Business XML (ebXML) Message Service defines the
message enveloping and header document schema used to transfer
ebXML messages over a communications protocol such as HTTP or
SMTP and the behaviour of software sending and receiving ebXML
messages. The ebMS is defined as a set of layered extensions to
the base Simple Object Access Protocol [SOAP] and SOAP
Messages with Attachments [SOAPAttach] specifications. This
standard provides security and reliability features necessary to
support international electronic business. The ebMS provides the
message packaging, routing and transport facilities for the ebXML
infrastructure. The ebMS is not defined as a physical components,
but rather as an abstraction of a process.
Price RM80
35.240.15 Identification cards and related
devices
MS 1901: Part 1: 2006
Malaysian electronic passport - Part 1: Physical characteristics.
Price RM10
MS 1901: Part 2: 2006
Malaysian electronic passport - Part 2: Radio frequency power
and signal interface.
Price RM10
MS 1901: Part 3: 2006
Malaysian electronic passport - Part 3: Initialisation.
Price RM20
MS 1901: Part 4: 2006
Malaysian electronic passport - Part 4: Transmission protocol.
Price RM10
MS 1901: Part 5: 2007
Malaysian electronic passport - Part 5: Guidelines for logical
data structure.
Price RM10
MS 1901: Part 6: 2006
Malaysian electronic passport - Part 6: Biometrics.
Price RM30
MS 1901: Part 7: 2007
Malaysian electronic passport - Part 7: Guidelines for security
infrastructure.
Price RM20
MS 1901: Part 8: 2006
Malaysian electronic passport - Part 8: Test methods.
Price RM10
MS 1960: Part 2: 2007
Multipurpose smart card - Part 2: Data format for national ID
application - Code of practice.
Price RM20
MS ISO/IEC 10373-3 : 2004
Identification cards – Test methods – Part 3: Integrated circuit(s)
cards with contacts and related interface devices (First revision)
This standard defines test methods for characteristics of integrated
circuit(s) cards with contacts and related interface devices according
to the definition given in MS ISO/IEC 7816. Each test method is cross-
referenced to one or more base standards, which may be MS ISO/
IEC 7810 or one or more of the supplementary standards that define
the information storage technologies employed in identification card
applications. This part deals with test methods, which are specific to
integrated circuit technology with contacts. Test methods described
in this standard are intended to be performed separately and
independently.
Price RM90
MS ISO/IEC 10373-6 : 2004
Identification cards – Test methods – Part 6: Proximity cards
(First revision)
This standard deals with test methods which are specific to
contactless integrated circuit(s) card technology (Proximity cards).
Unless otherwise specified, the tests in this standard shall be applied
exclusively to Proximity cards defined in ISO/IEC 14443-1 and ISO/
IEC 14443-2. Test methods described in this standard are intended
to be performed separately.
Price RM50
44
MS ISO/IEC 10373-7 : 2004
Identification cards – Test methods – Part 7: Vicinity cards (First
revision)
This standard deals with test methods, which are specific to
contactless integrated circuit(s) cards technology (vicinity cards).
Unless otherwise specified, the tests in this standard shall be applied
exclusively to Vicinity cards defined in ISO/IEC 15693-1 and ISO/
IEC 15693-2. Test methods described in this standard are intended
to be performed separately.
Price RM40
MS ISO/IEC 10536-1 : 2004
Identification cards – Contactless integrated circuit(s) cards – Close-
coupled cards – Part 1: Physical characteristics (First revision)
This part of MS ISO/IEC 10536 specifies the physical characteristics
of close-coupled cards (CICC). It applies to identification cards of
the card type ID-1 operating either in a slot or on the surface of a
coupling device.
Price RM10
MS ISO/IEC 11693 : 2004
Identification cards - Optical memory cards - General
characteristics (First revision)
This standard provides information necessary to store data on cards,
to read data from cards, and for the physical, optical, and data
interchangeability of optical memory cards in information processing
systems. It defines the general characteristics of optical memory
cards including card materials, construction, characteristics,
dimensions, and test environments which have been determined to
be common to all types of optical memory cards regardless of
recording method employed. The intent of this Standard is to provide
necessary information for card manufacturers, card issuers and card
users interested in interchanging digital information encoded on
optical memory cards.
Price RM20
MS ISO/IEC 11694-1 : 2004
Identification cards - Optical memory cards - Linear recording
method - Part 1: Physical characteristics (First revision)
Note: First revision of MS ISO/IEC 11694-1 : 1996
This part of ISO/IEC 11694 defines the physical characteristics of
optical memory cards using the linear recording method.
Price RM10
MS ISO/IEC 14443-1 : 2003
Identification cards - Contactless integrated circuit(s) cards –
Proximity cards - Part 1 : Physical characteristics
This Malaysian Standard specifies the physical characteristics of
proximity cards (PICC). It applies to identification cards of the card
type ID-1 operating in proximity of a coupling device.
Price R210
MS ISO/IEC 14443-2 : 2003
Identification cards - Contactless integrated circuit(s) cards -
Proximity cards - Part 2 : Radio frequency power and signal
interface
This Malaysian Standard specifies the characteristics of the fields to
be provided for power and bi-directional communication between
proximity coupling devices (PCDs) and proximity cards (PICCs)
Price RM20
MS ISO/IEC 14443-3 : 2003
Identification cards - Contactless integrated circuit(s) cards -
Proximity cards - Part 3 : Initialization and anticollision
This Malaysian Standard describes:
- poiling for proximity cards (PICCs) entering the field of a
proximity coupling device (PCD);
- the byte format, the frames and timing used during the initial
phase of communication between PCDs and PICCs;
- the initial request and answer to request command content;
methods to detect and communicate with one PICC among
several PISSc (anticollision);
- other parameters required to initialize communications between
a PICC and PCD;
- optional means to ease and speed up the selection of one PICC
among several PICCs based on application criteria.
Price RM60
MS ISO/IEC 14443-4 : 2003
Identification cards - Contactless integrated circuit(s) cards -
Proximity cards - Part 4 : Transmission protocol
This Malaysian Standard specifies a half-duplex block transmission
protocol featuring the special needs of a contactless environment
and defines the activation and deactivation sequence of the protocol.
Price RM50
35.240.20 IT applications in office work
MS ISO/IEC 2382-27 : 2005
Information technology – Vocabulary – Part 27 : Office
automation
This Malaysian Standard is intended to facilitate international
communication in office automation. It presents, in two languages,
terms and definitions of selected concepts relevant to the field of
office automation and identifies relationships between the entries.
Price RM30
MS ISO/IEC 8613 : Part 1 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part 1 :
Introduction and general principles.
This is an 8-parts series of standards. These series applies to the
interchange of documents by means of data communications or the
exchange of storage media. It provides for the interchange of
documents containing one or more different types of content such
as character text, images, and sound. the parts, describes the inter-
dependence of the parts, defines conformance to the standards, and
gives rules for defining document application profiles.
Price RM100
45
MS ISO/IEC 8613 : Part 8 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
8 : Geometric graphics content architectures.
This part of the standard defines a geometric graphics content
architecture that can be used in conjunction with the document
architecture defined in Part 2. It also defines an interface which
allows the use of content structured according to MS ISO 8632
within documents structured according to Part 2. It defines those
aspects of positioning and imaging applicable to the presentation of
this geometric graphics content architecture in a basic layout ob-
ject, defines the presentation attributes applicable to this geometric
graphics content architecture. It describe a content layout process,
which together with the document layout process described in
Part 2, —- describes the layout of geometric graphics
content in basic layout objects and determines the dimensions
of these basic layout objects.
Price RM60
MS ISO/IEC 8613 : Part 10 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
10 : Formal specification.
This part of the standard specifies a formal description technique
appropriate for describing the technical specifications of the
document structures (Part 2), the document profile (Part 4) and the
content architectures (Part 6,7 and 8). It gives formal specification
of the documents structures, the document profile and the content
architectures using this formal description technique. The aim of
the formal specifications of ODA (FODA) is to provide a precise and
unambiguous interpretation of the technical specifications in Parts
2, 4, 6, 7, 8 using formal syntax and formal semantics.
Price RM370
MS ISO/IEC 10183-1 : 1996 (2003)
IT - Text and office systems - Office Document architecture
(ODA) and interchange format - Technical report on ISO
8613 implementation testing : Part 1 : Testing methodology.
This Malaysian Standard defines terms used in the context of imple-
mentation testing, presents a conceptual model of ODA implementa-
tions, gives a phased approach to testing implementations, deter-
mines the functional components in generation and reception test-
ing, gives the requirements for abstract test cases.
Price RM30
MS ISO/IEC 10183-2 : 1996 (2003)
IT - Text and office systems - Office Document architecture
(ODA) and interchange format - Technical Report on ISO
8613 implementation testing : Part 2 : Framework for ab-
stract test cases.
This Malaysian Standard specifies a framework for the develop-
ment of abstract test cases, specifies a test case notation used to
specify abstract test cases. The purpose is to define a testing
methodology and provide a framework for specifying abstract test
cases for ISO 8613 implementation testing, the overall objective
being the provision of a suitable base for testing the interworking
capability of ODA implementations.
Price RM60
MS ISO/IEC 10740-1 : 1996
IT - Text and office systems - Referenced data transfer :
Part 1 : Abstract service definition.
This Malaysian Standard defines the elements used in the specifi-
cation of the referenced data transfer within distributed office ap-
plications. Its contents is grouped into two major areas : an intro-
ductory part in which references, definitions and abbreviations are
collected together, and a definition of the RDT abstract services.
Price RM20
MS ISO/IEC 8613 : Part 2 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
2 : Document structures.
This part of the standard defines a document architecture in-
tended for representation of documents, a document processing
model, the document structures, the basic constituents of the ar-
chitecture and a descriptive representation of these in terms of
attributes. It also defines a interface which allows the use of differ-
ent content architectures with the document architecture, the ref-
erence model of the document layout process, the reference model
of the document imaging process, three document architecture
classes, a notation used for illustrating and describing document
structures. It also provides examples of document architecture
levels, document structures and document attributes.
Price RM270
MS ISO/IEC 8613 : Part 4 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
4 : Document profile.
This part of the standard defines the purpose of the document
profile and specifies the attributes which constitute the document
profile.
Price RM50
MS ISO/IEC 8613 : Part 5 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
5 : Office document interchange format (ODIF).
This part of the standard defines the format of the data stream
used to interchange documents structured in accordance with Part
2 and the representation of the constituents which may appear in
an interchange document.
Price RM120
MS ISO/IEC 8613 : Part 6 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
6 : Character content architectures.
This part of the standard defines character content architectures
that can be used in conjunction with the document architecture
defined in Part 2. It also defines the internal structure of content
conforming to these character content architecture, aspects of
positioning and imaging applicable to presentation of these charac-
ter content architecture in a basic layout object, the presentation
attributes and control functions applicable to these character con-
tent architectures. It describes a content layout process which,
together with the document layout process described in Part 2,
determines the layout of character content in basic layout objects
and the dimensions of these basic layout objects.
Price RM90
MS ISO/IEC 8613 : Part 7 : 1995
Information processing - Text and office systems - Office
Document Architecture (ODA) and interchange format : Part
7 : Raster graphics content architectures.
This part of the standard defines the raster graphics content archi-
tectures that can be used in conjunction with the document archi-
tecture defined in Part 2. It also defines the internal structure of
content portions that are structured according to a raster graphics
content architecture, aspects of positioning and imaging applicable
to the presentation of raster graphics contents in a basic layout
object, a content layout process which, together with the docu-
ment layout process defined in Part 2. It specifies the methods for
determining the dimensions of basic layout objects for raster graph-
ics content portions, the presentation and content portion attributes
applicable to raster graphics content architectures.
Price RM60
46
MS ISO/IEC 10740-2 : 1996
IT - Text and office systems - Referenced data transfer :
Part 2 : Protocol specification.
This Malaysian Standard describes the application-service-element
(ASE) and the application-contexts (Acs) for the referenced data
transfer (RDT) within distributed-office-applications. Its content covers
four major areas : an introductory part in which reference, definitions
and abbreviations are collected together; specification of the RDT
application service element (RDTSE); specification of two RDT
application contexts containing the RDTSE; conformance
requirements for the RDT application contexts.
Price RM20
35.240.30 IT applications in information,
documentation and publishing
MS IEC 60950-1 : 2003
Information technology equipment - Safety - Part 1: General
requirements.
This standard is applicable to mains-powered or battery-powered
information technology equipment, including electrical business
equipment and associated equipment, with a RATED VOLTAGE not
exceeding 600 V. This standard is also applicable to such information
technology equipment: designed for use as telecommunication
terminal equipment and TELECOMMUNICATION NETWORK
infrastructure equipment, regardless of the source of power; -
designed and intended to be connected directly to, or used as
infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM,
regardless of the source of power; - designed to use the AC MAINS
SUPPLY as a communication transmission medium (see note 4 of
clause 6 and note 3 of clause 7). This standard specifies requirements
intended to reduce risks of fire, electric shock or injury for the
OPERATOR and layman who may come into contact with the
equipment and, where specifically stated, for a SERVICE PERSON.
This standard is intended to reduce such risks with respect to installed
equipment, whether it consists of a system of interconnected units
or independent units, subject to installing, operating and maintaining
the equipment in the manner prescribed by the manufacturer.
Price RM280
MS ISO/IEC 2382-17 : 2005
Information technology – Vocabulary – Part 17 : Databases
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM30
MS ISO 8879 : 1995 (2005)
Information processing – Text and office system – Standard
generalized markup language (SGML)
This Malaysian Standard specifies a language for document
representation referred to as the “Standard Generalized Markup
Language (SGML). SGML can be used for publishing in its broadest
definition, ranging from single medium conventional publishing to
multi-media data base publishing . SGML can also be used in office
document processing when the benefits of human readability and
interchange with publishing systems are required.
Price RM210
MS ISO 9069 : 1995
Information technology - SGML support facilities - SGML
document interchange format.
This Malaysian Standard specifies a data structure known as the
SGML Document Interchange Format (SDIF). SDIF enables a
document conforming to ISO 8879, which might be stored in several
entities, to be packed into a data stream for interchange in a manner
that will permit the recipient to reconstitute the separate entities. The
SDIF also allows related documents to be included in the data stream,
such stream, such as covering letters, transmittal forms, catalog
cards, formatting procedures or the “document profile” required by a
document architecture.
Price RM20
MS ISO 9070 : 1995
Information technology - SGML support facilities registration
procedures for public text owner identifiers.
This Malaysian Standard has been developed to support the use of
the SGML, defined in ISO 8879, and in other text description and
processing languages. This standard applies to the assignment of
unique owner prefixes to owners of public text conforming to ISO
8879. Price RM30
MS ISO/IEC 9541 : Part 1 : 1995
Information technology - Font information : Part 1 : Architecture.
This Malaysian Standard specifies the architecture of font resources,
as well as the formats for font interchange among information
processing systems. It also specifies the architectures and formats
that can be used to construct font references in general electronic
document interchange. Part 1 specifies the architecture of a font
resource, i.e., the font description, font metrics, glyph description
and glyph metrics properties required for font references and the
interchange of font resources.
Price RM100
MS ISO/IEC 9541 : Part 2 : 1995 (2005)
Information technology – Font information interchange : Part 2
: Interchange format
This Malaysian Standards as a whole specifies the architecture of
font resources, as well as the formats for font interchange amongst
information processing systems. It also specifies the architecture and
formats that can be used to construct font references in general
document interchange.
Price RM60
MS ISO/IEC 9541 : Part 3 : 1995
Information technology - Font information : Part 3 : Glyph shape
representation.
Part 3 specifies the architecture and interchange formats of glyph
shape representations. The encoding of font resource information
as defined in this Part 3 is specified in both ASN.1 and SGML
representations for consistent generation of font resources for use in
these processing environments.
Price RM80
MS ISO/IEC TR 10037 : 1995 (2005)
Information technology – SGML and text-entry systems –
Guidelines for SGML syntax-directed editing systems
This Malaysian Standard describes a set of functions which an SGML
syntax-directed editing system may have in order to help users
manipulate documents marked up according to the rules of SGML.
These functions may be embodied in a special-purpose editing
system, or they could be added to those functions already present in
an existing text-entry or editing system.
Price RM20
MS ISO/IEC 10744 : 1995 (2005)
Information technology – hypermedia/time-based structuring
language (HyTime)
This Malaysian Standard defines a language and underlying model
for the representation of “hyperdocuments” thal link and synchronize
static and dynamic (time-based) information contained in multiple
conventional and multimedia documents and information objects. The
language is known as the “Hypermedia/Time-based Structuring
Language or “HyTime”.
Price RM500
47
MS 1482 : 2001
Banking status message (BANSTA) for the payment of customs
duty (First revision)
This Malaysian Standard provides the definitions of the Banking status
message (BANSTA) to be used in Electronic Data Interchange (EDI)
between trading partners involved in administration, commerce and
transport. It is based on universal practice and is not dependent on
the type of business or industry. This standard supersedes MS 1482
: 1999 (P).
Price RM40
MS 1483 : 2001
Multiple credit advice message (CREMUL) for the payment of
customs duty (First revision)
This Malaysian Standard provides the definitions of the Multiple credit
advice message (CREMUL) to be used in Electronic Data Interchange
(EDI) between trading partners involved in administration, commerce
and transport. This standard supersedes MS 1483 : 1999 (P).
Price RM50
MS 1484 : 2001
Multiple debit advice message (DEBMUL) for the payment of
customs duty (First revision).
This Malaysian Standard provides the definitions of the Multiple debit
advice message (DEBMUL) to be used in Electronic Data Interchange
(EDI) between trading partners involved in administration, commerce
and transport. It is based on universal practice and is not dependent
on the type of business or industry. This standard supersedes MS
1484 : 1999 (P).
Price RM50
MS 1485 : 2001
International movement of goods governmental regulatory
(SANCRT) by the customs (First revision)This Malaysian Standard provides the definitions of the International
movement of goods governmental regulatory message (SANCRT)
to be used in Electronic Data Interchange (EDI) between trading
partners involved in administration, commerce and transport. It is
based on universal practice and is not dependent on the type of
business or industry. This standard supersedes MS 1485 : 1999(P).
Price RM50
MS 1486 : 2001
Vocabulary on United nations standard message (UNSM) (First
revision)
This Malaysian Standard are intended for both national and
international electronic data interchange applications. This standard
defines the fundamental terms relating to United Nations Standard
Message (UNSM). The term message is also known in other standard
as a Transaction set. This standard supersedes MS 1486 : 1999 (P).
Price RM10
MS ISO 12083 : 1996
Information and documentation - Electronic manuscript
preparation and mark up.
This Malaysian Standard presents four documents type definitions
and additional facilities conforming to ISO 8879. Intended to provide
document architectures for the creation and interchange of books,
articles and serial publications. Specifies the SGML declaration
defining the syntax used by the document type definitions for the
document type definition for Mathematics which may be embedded
in other SGML applications.
Price RM200
MS ISO/IEC 13250 : 2003
Information technology – SGML applications – Topic maps
This Malaysian Standard defines multiple, concurrent views of sets
of information objects. The structural nature of these views is
unconstrained; they may reflect an object oriented approach, or they
may be relational, hierarchical, ordered, unordered, or any
combination of the foregoing. Moreover, an unlimited number of topic
maps may be overlaid on a given set of information resources.
Price RM50
MS ISO/IEC 13673 : 2003
Information technology – Document processing and related
communication - Conformance testing for Standard Generalized
Markup Language (SGML) systems
This Malaysian Standard addresses the construction and use of test
suites for verifying conformance of SGML systems. Its provisions
assist those who build test suites, those who build SGML systems to
be evaluated by such suites, and those who examine an SGML
system’s performance on a test suite as part of the process of
selecting an SGML tool.
Price RM40
MS ISO/IEC 13886 : 2003
Information technology – Language-Independent Procedure
Calling (LIPC)
This Malaysian Standard specifies a model for procedure calls, and
a reference syntax for map to and from the model. This syntax is
referred to as the Interface Definition Notation. The model defined in
this standard includes such features as procedure invocation,
parameter passing, completion status, and environmental issues
relating to non-local references and state.
Price RM80
MS ISO/IEC 14519 : 2003
Information technology – POSIX ADA language interfaces –
Binding for system application program interface
This Malaysian Standard provides an ADA application program
interface for the language-independent services made accessible to
C-language applications programs.
Price RM900
35.240.40 IT applications in banking
MS 1481 : 2001
Multiple payment order message (PAYMUL) for the payment of
customs duty (First revision)
This Malaysian Standard provides the definition of the Multiple
payment order message (PAYMUL) to be used the payment of
customs duty in Electronic Data Interchange (EDI) between trading
partners involved in administration, commerce and transport. This
standard supersedes MS 1481 : 1999 (P).
Price RM50
48
MS 1775 : 2004
Notification message for declaration of dangerous goods
This Malaysian Standard provides the definition of the international
forwarding and transport dangerous goods notification message
(IFTDGN) to be used in Electronic data Interchange (EDI) between
trading partners involved in administration, commerce and transport.
Price RM60
MS ISO/IEC 7811-1 : 1998
Identification cards – Recording technique – Part 1 : Embossing
(First revision)
This revised Malaysian Standard is identical with ISO/IEC 7811-1 :
1995. This standard specifies requirements for embossed characters
on identification cards. The embossed characters are intended for
transfer of data either by use of imprinters or by visual or machine
reading. This standard supersedes MS ISO 7811-1:1993 –
Identification Cards – Recording technique : Part 1: Embossing.
Price RM40
MS ISO/IEC 7811-2 : 1998
Identification cards – Recording technique – Part 2 : Magnetic
stripe (First revision)
This revised Malaysian Standard is identical with ISO/IEC 7811-2 :
1995. This standard specifies characteristics for a magnetic stripe
(Including any protective overlay) on and identification card, the
encoding technique and coded character sets. The magnetic
recordings are intended for machine reading. This standard
supersedes MS ISO 7811-2:1993 – Identification Cards – Recording
technique : Part 1 : Magnetic Stripe.
Price RM20
MS ISO/IEC 7811-3 : 1998
Identification cards – Recording technique – Part 3 :Location
for embossed characters on ID-1 cards
(First revision)
This revised Malaysian Standard is identical with ISO/IEC 7811-3 :
1995. This standard specifies the locations of embossed characters
on identification cards of ID-1 size, the dimensions of which are
specified in ISO/IEC 7810. The embossed characters are intended
for transfer of data either by use of imprinters or by visual or machine
reading. This standard supersedes MS ISO 7811-3 : 1993 –
Identification Cards – Recording technique : Part 3 : Location of
embossed characters on ID-1 cards.
Price RM10
MS ISO/IEC 7811-4 : 1998
Identification cards – Recording technique – Part 4 :Location of
read-only magnetic Tracks-tracks 1 and 2 (First revision)
This revised Malaysian Standard is identical with ISO/IEC 7811-4 :
1995. This standard specifies the location of the track for read-only
magnetic recording, tracks 1 and 2, on identifications cards. This
standard supersedes MS ISO 7811-4 : 1993 – Identification Cards –
Recording technique : Part 4 : Location of read-only magnetic track-
- Tracks 1 and tracks 2.
Price RM10
MS ISO/IEC 7811-5 : 1998
Identification cards- Recording technique : Part 5 : Location of
read-write magnetic track-Track 3.
This Malaysian Standard is identical with ISO/IEC 7811-5 : 1995.
This standard specifies the location of a track for read-write magnetic
recording, tracks 3, on identification cards. This standard supersedes
MS ISO 7811-5 : 1993 – Identification cards – Recording technique :
Part 5 : Location of read-write magnetic track – Track 3.
Price RM10
MS ISO/IEC 7811-6 : 1998
Identification cards – Recording technique – Part 6 : Magnetic
stripe-high coercivity
This Malaysian standard is identical with ISO/IEC 7811-6:1996. This
standard specifies characteristics for a high coercivity magnetic stripe
(including any protective overlay) on an identification card, the
encoding technique and coded character sets.
Price RM40
MS ISO/IEC 7812-1 : 1998
Identification cards – Identification of issuers – Part 1 :
Numbering system (First revision)
This revised Malaysian standard is identical with ISO/IEC 7812-1 :
1993. This standard specifies a numbering system for the
identification of issuers of identification cards used in international
interchange. This standard supersedes MS ISO 7812:1993 –
Identification Cards – Numbering and registration procedure for issuer
identifiers.
Price RM20
MS ISO/IEC 7812-2 : 1998
Identification cards – Identification of issuers – Part 2 :
Application and registration procedures
(First revision)
This revised Malaysian standard is identical with ISO/IEC 7812-2 :
1993. This describes the application and registration procedures for
numbers issued in accordance with MS ISO/IEC 7812-1. This
standard supersedes MS ISO 7812 : 1993 – Identification Cards –
Numbering and registration procedure for issuer identifiers.
Price RM30
MS ISO/IEC 7816-4 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 4: Inter industry commands
for interchange
This Malaysian Standard specifies the content of the messages,
commands and responses, transmitted by the interface device to
the card and conversely the structure and content of the historical
bytes sent by the card during the answer to reset, the structure of
files and data, as seen at the interface when processing inter industry
commands for interchange, access methods to files and data in the
card, a security architecture defining access rights to files and data
in the card, methods for secure messaging; and αccess methods to
the algorithms processed by the card. It does not describe these
algorithm.
Price RM60
49
MS ISO/IEC 7816-6 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 6: Inter industry data
elements
This Malaysian Standard specifies directly or by reference the Data
Elements (DE), including composite DES, used in inter industry
interchange, based on integrated circuit cards (ICCs).
Price RM30
MS ISO/IEC 7816-7 : 2003
Information technology – Identification cards – Integrated
circuit(s) cards with contacts – Part 7: Inter industry commands
for Structured Card Query Language (SCQL)
This Malaysian Standard specifies the concept of a SCQL database
(SCQL = Structured Card Query Language based on SQL, (MS ISO
9075); and the related inter industry enhanced commands.
Price RM50
MS ISO/TR 9544 : 1993
Information technology - Vocabulary - Computer assisted
publishing.
This Malaysian Standard is intended to provide consistency in the
terms and concepts used in the field of computer-assisted publishing.
It presents terms and definitions of selected concepts relevant to
this field and identifies relationships between the entries.
Price RM50
MS ISO 9735-1 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) – Application level syntax rules - (Syntax
version number: 4) – Part 1 : Syntax rules common to all
parts, together with syntax service directories for each of the
parts
Specifies common syntax rules for the formatting of batch and
interactive messages to be interchanged between computer
application systems. It includes the definitions and service directories
for all parts comprising ISO 9735. This standard is identical with ISO
9735-1 : 1998.
Price RM80
MS ISO 9735-2 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) – Application level syntax rules - (Syntax
version number: 4) – Part 2 : Syntax rules specific to batch EDI
Specifies syntax rules specifically for the formatting of batch
messages to be interchanged between computer application systems.
For the transfer of packages in a batch environment, see ISO 9735-
8. This standard is identical with ISO 9735-2 : 1998.
Price RM20
MS ISO 9735-3 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 3 : Syntax rules specific to interactive
EDI
Specifies syntax rules specifically for the transfer of interactive
messages to be interchanged between computer application systems.
For the transfer of packages in an interactive environment, see ISO
9735-8. This standard is identical with ISO 9735-3 : 1998.
Price RM30
MS ISO 9735-4 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 4 : Syntax and service report message
for batch EDI (message type – CONTRL)
Defines the syntax and service report message for batch EDI,
CONTRL. This standard is identical with ISO 9735-4 : 1998.
Price RM20
MS ISO 9735-5 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 5 : Security rules for batch EDI
(authenticity, integrity and non-repudiation of origin) .
Specifies syntax rules for EDIFACT security. It provides a method to
address message/package level, group level and interchange level
security for authenticity, integrity and non-repudiation of origin, in
accordance with established security mechanisms. This standard is
identical with ISO 9735-5 : 1999.
Price RM60
MS ISO 9735-6 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 6 : Secure authentication and
acknowledgement message (message type – AUTACK)
Defines the secure authentication and acknowledgement message
AUTACK. This standard is identical with ISO 9735-6 : 1999.
Price RM40
MS ISO 9735-8 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 8 : Associated data in EDI
Specifies syntax rules for associated data in EDI to be interchanged
between computer application systems. This provides a method to
transfer data which cannot be carried by means of either a batch or
interactive EDIFACT message. The data may be created by other
applications (such as STEP, CAD, etc.), and is referred to in this part
as associated data. This standard is identical with ISO 9735-8 : 1998.
Price RM20
MS ISO 9735-9 : 2000
Electronic data interchange for administration, commerce and
transport (EDIFACT) –Application level syntax rules - (Syntax
version number: 4) – Part 9 : Security key and certificate
management message (message type – KEYMAN)
Defines the security key and certificate management message
KEYMAN. This standard is identical with ISO 9735-9 1999.
Price RM40
MS ISO/IEC TR 10037 : 1995 (2005)
Information technology – SGML and text-entry systems –
Guidelines for SGML syntax-directed editing systems
This Malaysian Standard describes a set of functions which an SGML
syntax-directed editing system may have in order to help users
manipulate documents marked up according to the rules of SGML.
These functions may be embodied in a special-purpose editing
system, or they could be added to those functions already present in
an existing text-entry or editing system.
Price RM20
MS ISO 10202 : Part 1 : 1995 (2003)
Financial transaction cards - Security architecture of financial
transaction systems using integrated circuit cards : Part 1 : Card
life cycle.
This Malaysian Standard specifies the principles for the protection of
the Integrated Circuits (ICS) in financial transaction cards form their
manufacture and issue, through use to their termination. It is
applicable to any organization which is responsible for implementing
security procedures for protecting the IC and the Integrated Circuit
Cards ICC) during their life cycle. This standard covers those features
of the life cycle of the ICC which are additional to those addressed in
International Standards relating to bank cards with magnetic stripes.
This standard covers the security techniques to be used by
organizations involved in the IC and ICC manufacture, issue, use of
the IC and termination processes.
Price RM20
50
MS ISO 10202-6 : 1996 (2003)
Financial transaction cards - Security architecture of financial
transaction systems using integrated circuit cards : Part 6 :
Cardholder verification.
This part of Malaysian Standard specifies the requirements for the
security of cardholder verification when a discrete Cardholder
Identification Value (CIV), for example a Personal Identification
Number (PIN), is used in conjunction with an Integrated Circuit Card
(ICC), which may or may not contain magnetic stripes. The purpose
of cardholder verification is to determine that the card presenter is
the cardholder.
Price RM20
MS ISO/IEC 10373 : 1995
Identification cards - Test methods.
This Malaysian Standard describes test methods for the
characteristics of identification cards in accordance with MS ISO 7810,
MS ISO 7813 and MS ISO 7816. This standard covers methods for
testing characteristics of identification card for the purpose of
conforming their compliance with International Standards.
Price RM40
MS ISO/IEC ISP 11185-12 : 1998
Information technology – international standardized profiles
FVT2nn – virtual terminal basic class – register of control object
type definition – Part 12 : FVT 2116 – Generalized telnet synch
control object; FVT 2117 – Generalized telnet signal control
object; FVT 2118 – Generalized telnet negotiation control object;
FVT 2119 – Generalized telnet sub negotiation control object.
This Malaysian Standard contain the definition of control object
types that are used for the transfer of TELNET signals and
negotiation of TELNET options.
Price RM30
35.240.50 IT application in industry
MS ISO/IEC 2382-24 : 2005
Information technology – Vocabulary – Part 24 : Computer-
integrated manufacturing
This Malaysian Standard is intended to facilitate international
communication in computer-integrated manufacturing. It presents,
in two languages, terms and definitions of selected concepts relevant
to the field of information technology and identifies relationships
among the entries.
Price RM20
MS ISO/IEC 2382-28 : 2005
Information technology – Vocabulary – Part 28 : Artificial
intelligence – Basic concepts and expert systems
This Malaysian Standard is intended to facilitate international
communication in information technology. It presents, in two
languages, terms and definitions of selected concepts relevant to
the field of information technology and identifies relationships among
the entries.
Price RM40
35.240.60 IT application in transport and trade
MS ISO 9735-7 : 2001
Electronic data interchange for administration, commerce and
transport (EDIFACT) - Application level syntax rules (Syntax
version number : 4) - Part 7 : Security rules for batch EDI
(confidentiality)
This part of MS ISO 9735 for batch EDIFACT security addresses
message/package level, group level and interchange level security
for confidentiality in accordance with established security
mechanisms.
Price RM40
MS ISO 9735-10 : 2004
Electronic data interchange for administration, commerce and
transport (EDIFACT) – Application level syntax rules (Syntax
version number: 4, Syntax release number: 1) – Part 10: Syntax
service directories
This standard specifies the syntax service directories of all parts of
the MS ISO 9735 series (part 1 to 9). It includes the rules at the
application level for the structuring of data in the interchange of
electronic messages in an open environment, based on the
requirements of either batch or interactive processing.
Price RM120
MS ISO 14817 : 2004
Transport information and control systems – Requirements for
an ITS/TICS central data registry and ITS/TICS data dictionaries
This Malaysian Standard specifies the framework, formats, and
procedures used to define information exchanges within the
Intelligent. Transport System/Transport Information and Control
Systems (ITS/TICS) sector. It defines the content of the ITS/TICS
central Data Registry and Data Dictionaries, the registration
process to enter data concepts into the Data Registry. Throughout
the text, the Data Registry should be taken to mean the ITS/TICS
central Data Registry.
Price RM110
MS ISO 15622 : 2004
Transport information and control systems – Adaptive cruise
control systems Performance
This Malaysian Standard specifies the basic control strategy, minimum
functionality requirements, basic driver interface elements, minimum
requirements for diagnostics and reaction to failure, and performance
test procedures for Adaptive Cruise Control (ACC) systems. ACC is
fundamentally intended to provide longitudinal control of equipped
vehicles while travelling on highways under free-flowing traffic
conditions. ACC may be augmented with other capabilities, such as
forward obstacle warning.
Price RM40
MS ISO 15623 : 2004
Transport information and control systems – Forward vehicle
collision warning systems – Performance
This Malaysian Standard specifies performance requirements and
test procedures for systems capable of warning the driver of short
inter-vehicle and closing speed which may cause a rear-end collision
with other vehicles, including motor cycles, ahead of the subject
vehicle while it is operating at ordinary speed. This Malaysian
Standard is applicable to operations on roads with curve radii over
125 m as well as higher radius curves.
Price RM40
35.240.70 IT applications in science
MS 2039: 2006
Addresses - Standard format - Requirements.
Price RM50
MS ISO 19101 : 2003
Geographic information - Reference model
This Malaysian Standard specifies reference model for geographic
information. This framework identifies the scope of the standardisation
activity being undertaken and the context in which it takes place.
51
35.260 Office machines
MS 10 : 1971
Specification for trimmed sizes of papers and boards.
Refers to paper and boards used for administrative, commercial and
technical purposes, and for printed matter such as forms, professional
periodicals and catalogues. Two ranges of trimmed sizes (A and B
series) as recommended by ISO are incorporated here. All sizes
given in metric measurement.
Price RM20
MS 792 : 1982
Specification for typewriter ribbon, nylon.
Prescribes requirements of nylon fabrics used, dimensions of ribbon
and performance. Includes test methods and procedures for packing,
marking and sampling.
Price RM10
MS 793 : 1982
Specification for typewriter ribbon, cotton.
Specifies requirements of cotton fabric used, dimension of ribbon
and performance such as wear down test, recovery and writing
qualities. Test methods and procedures for packing, marking and
sampling included.
Price RM10
MS 854 : 1983
Specification for ball-point pens and refills.
Prescribes requirements and test methods for single cartridge ball-
point and replacement refills. Include definitions, sizes of ball-point,
writing quality, ink content and quality of ink.
Price RM20
MS 855 : 1983
Specification for newsprint.
Specifies requirements on the basis of weight of substance, bursting
strength, tearing strength, tensile strength, brightness, opacity,
roughness and thickness.
Price RM10
MS 856 : 1983
Specification for envelopes for storage of processed x-ray films.
Specifies shape, sizes, basic weight and minimum bursting strength
of materials for two types of envelopes designated as Type 1 and
Type 2.
Price RM10
MS 1159 : 1989
Specification for pencils.
Covers classification of pencils, materials used in making pencils, its
physical dimensions and test methods on the quality of wooden-cased
black lead pencil for writing, drafting and drawing purposes.
Price RM10
MS 1160 : 1989
Specification for school chalks.
Specifies the material requirements and methods of test for moulded
white and coloured school chalks intended primarily for writing on
chalkboards.
Price RM10
MS 1163 : 1989
Specification for rubber erasers.
Covers requirements for rubber erasers for removing ink and pencil
writing. The unvulcanized rubber eraser and the rubber eraser to be
fitted to pencil are excluded.
Price RM10
The framework provides the method by which what is to be
standardised can be determined and describes how the contents of
the standards are related.
Price RM60
MS ISO 19107 : 2003
Geographic information - Spatial schema
This Malaysian Standard specifies conceptual schemas for describing
the spatial characteristics of geographic features, and a set of spatial
operations consistent with these schemas. It treats vector geometry
and topology up to three dimensions. It defines Malaysian Standard
spatial operations for use in access, query, management, processing
and data exchange of geographic information.
Price RM180
MS ISO 19108 : 2003
Geographic information - Temporal schema
This Malaysian Standard defines concepts for describing temporal
characteristics of geographic information. It depends upon existing
information technology standards for the interchange of temporal
information. It provides a basis for defining temporal feature attributes,
feature operations and feature associations, and for defining the
temporal aspects of meta data about geographic information. Since
this Malaysian Standard is concerned with the temporal
characteristics of geographic information as they are abstracted from
the real world, it emphasises valid time frame rather than transaction
time.
Price RM60
MS ISO 19111 : 2003
Geographic information - Spatial referencing by coordinates
This Malaysian Standard defines the conceptual schema for the
description of spatial referencing by coordinates. It describes the
minimum data required to define one-, two- and three-dimensional
coordinate reference systems. It allows additional descriptive
information to be provided. It also describes the information required
to change coordinate values from one coordinate reference system
to another.
Price RM60
MS ISO 19113 : 2003
Geographic information - Quality principles
This Malaysian Standard establishes the principles for describing
the quality of geographic data and specifies components for reporting
quality information. It also provides an approach to organising
information and about data quality. This Malaysian Standard is
applicable to data producers providing quality information to describe
and assess how well a data set meets its mapping of the universe of
discourse as specified in the product specification, formal or implied,
and to data users attempting to determine whether or not specific
geographic data is of sufficient quality for their particular application.
This Malaysian Standard should be considered by organisations
involved in data acquisition and purchase, in such a way that it makes
it possible to fulfil the intentions of the product specification. It can
additionally be used for defining application schemas and describing
quality requirements.
Price RM40
MS ISO 19115 : 2003
Geographic information - Metadata referencing by coordinates
This Malaysian Standard defines the schema required for describing
geographic information and services. It provides information about
the identification, the extent, the quality, the spatial and temporal
schemas, spatial, reference and distribution of digital geographic data.
Price RM160
52
MS 1188 : 1990
Specification for correction fluid, white opaque and thinner.
Covers requirements for a white opaque correction fluid, primarily
for block out, correcting and concealing errors and any other changes.
A solvent for thinning for correction fluid is also covered herein.
Price RM10
MS 1190 : 1990
Specification for carbonless paper or no carbon required (NCR)
paper.
Specifies the quality requirements for paper-based copying systems
only, i.e. the paper as supplied to the printer of continuous stationery.
Also specifies are the two groups of image transfer systems i.e. the
self-imaging systems and the mechanical/non-mechanical transfer
systems.
Price RM10
MS ISO 4909 : 1994
Specification for bank cards - Magnetic stripe data content for
track -3.
This Malaysian Standard establishes specifications for those cards
issued by an acceptable to the banking industry and is intended to
permit interchange based on the use of magnetic stripe encoded
information.
Price RM20
MS ISO 5138 : Part 1 : 1993
Office machines - Vocabulary : Part 1 : Dictation equipment.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries.
Price RM30
MS ISO 5138 : Part 2 : 1993
Office machines - Vocabulary : Part 2 : Duplicators.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machine. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries. This Part of the vocabulary
on office machine deals with duplicators.
Price RM40
MS ISO 5138 : Part 3 : 1993
Office machines - Vocabulary : Part 3 : Addressing machines.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries. This Part of the vocabulary
on office machine deals with addressing machines
Price RM40
MS ISO 5138 : Part 4 : 1993
Office machines - Vocabulary : Part 4 : Letter opening machines.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries. This Part of the vocabulary
on office machine deals with letter opening machines.
Price RM20
MS ISO 5138 : Part 5 : 1993
Office machines - Vocabulary : Part 5 : Letter folding machines.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries. This Part of the vocabulary
on office machine deals with letter opening machines.
Price RM30
MS ISO 5138 : Part 7 : 1993
Office machines - Vocabulary : Part 7 : Postal franking machines.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries. This Part of the vocabulary
on office machine deals with postal franking machines.
Price RM30
MS ISO 5138 : Part 9 : 1993
Office machines - Vocabulary : Part 9 : Typewriters.
This Malaysian Standard is intended to facilitate national and
international exchanges in the field of office machines. It presents
terms and definitions of selected concepts relevant to this field and
identifies relationship between the entries.
Price RM40
53
Standards Number Price (RM) Page Standards Number Price (RM) Page
NUMERICAL LISTING
54
MS
MS 10 : 1971 20 52
MS 71 : 1972 20 2
MS 73 : 1972 40 2
MS 399 : 1976 30 2
MS 588 : 1979 30 3
MS 765 : 1982 10 8
MS 792 : 1982 10 52
MS 793 : 1982 10 52
MS 798 : 1982 10 9
MS 839 : 1983 40 9
MS 854 : 1983 20 52
MS 855 : 1983 10 52
MS 856 : 1983 10 52
MS 861 : Pt. 1 : 1983 50 9
MS 943 : 1984 10 9
MS 1074 : 1992 70 2
MS 1098 : 1987 10 40
MS 1134 : 1989 10 11
MS 1140 : 1989 40 10
MS 1159 : 1989 10 52
MS 1160 : 1989 10 52
MS 1163 : 1989 10 52
MS 1188 : 1990 10 53
MS 1190 : 1990 10 53
MS 1201 : 1991 50 16
MS 1277 : 1992 30 18
MS 1278 : 1992 20 18
MS 1299 : 1992 10 38
MS 1368 : 1994 20 11
MS 1481 : 2001 50 48
MS 1482 : 2001 40 48
MS 1483 : 2001 50 48
MS 1484 : 2001 50 48
MS 1485 : 2001 50 48
MS 1486 : 2001 10 48
MS 1536 : Pt. 1 : 2002 30 11
MS 1536 : Pt. 2 : 2002 30 12
MS 1536 : Pt. 3 : 2002 30 12
MS 1536 : Pt. 4 : 2002 80 12
MS 1536 Pt. 5 : 2004 30 12
MS 1537 : 2004 60 12
MS 1555 : 2002 20 5
MS 1730 : Pt. 1 : 2004 20 18
MS CISPR 11 : 2005 50 5
MS CISPR 12 : 2005 60 5
MS CISPR 13 : 2005 50 5
MS CISPR 14-1 : 2005 80 5
MS CISPR 14-2 : 2005 30 6
MS CISPR 15 : 2005 50 6
MS CISPR 16-1 : 2001 210 7
MS CISPR 16-1-1 : 2005 70 6
MS CISPR 16-1-2 : 2005 70 6
MS CISPR 16-1-3 : 2005 20 6
MS CISPR 16-1-4 2005 80 6
MS CISPR 16-1-5 : 2005 60 6
MS CISPR 16-2 : 2002 90 7
MS CISPR 16-2-1 : 2005 70 6
MS CISPR 16-2-2 : 2005 40 6
MS CISPR 16-2-3 : 2005 70 6, 7
MS CISPR 16-2-4 : 2005 30 6, 7
MS CISPR 16-4-2 : 2005 30 6
MS CISPR 17 : 2003 40 3
MS CISPR 18-1 : 2003 70 3
MS 1759 : 2004 180 18
MS 1760 : 2004 60 3
MS 1773 : 2004 80 44
MS 1775 : 2004 60 49
MS 1901 : Pt. 1 : 2006 10 44
MS 1901 : Pt. 2 : 2006 10 44
MS 1901 : Pt. 3 : 2006 20 44
MS 1901 : Pt. 4 : 2006 10 44
MS 1901 : Pt. 5 : 2007 10 44
MS 1901 : Pt. 6 : 2007 30 44
MS 1901 : Pt. 7 : 2007 20 44
MS 1901 : Pt. 8 : 2006 10 44
MS 1902 : 2006 30 1
MS 1903 : 2006 50 1
MS 1907 : 2006 60 18
MS 1960 : Pt. 2 : 2007 20 44
MS 2039 : 2006 50 51
MS 2100 : 2006 20 8
MS 2102 : 2006 20 8
MS 2103 : 2006 20 8
MS 2104 : 2006 20 8
MS CISPR
55
MS IEC
NUMERICAL LISTING
Standards Number Price (RM) Page Standards Number Price (RM) Page
MS CISPR 18-2 : 2003 100 3
MS CISPR 18-3 : 2003 50 3
MS CISPR 20 : 2005 90 7
MS CISPR 21 : 2002 20 2
MS CISPR 22 : 2005 80 7
MS CISPR 23 : 2002 20 2
MS CISPR 24 : 2000 40 2
MS CISPR 25 : 2005 70 7
MS IEC 60065 : 2003 170 9
MS IEC 60050-551-20 : 2003 30 3
MS IEC 60559 : 1992 30 18
MS IEC 60601-1-2 : 2002 20 3
MS IEC 60796-1 : 1993 60 38
MS IEC 60796-2 : 1993 30 38
MS IEC 60796-3 : 1993 20 38
MS IEC 60821 : 1992 290 38
MS IEC 60822 : 1993 160 38
MS IEC 60823 : 1993 160 38
MS IEC 60828 : 1993 20 38
MS IEC 60950-1 : 2003 280 47
MS IEC 60975 : 1993 40 39
MS IEC 61000-2-2 : 2005 40 3, 7
MS IEC 61000-2-4 : 2005 50 3, 7
MS IEC 61000-2-9 : 2001 40 3
MS IEC 61000-2-10 : 2002 50 3
MS IEC 61000-2-12 : 2003 40 3
MS IEC 61000-3-2 : 2003 40 4
MS IEC 61000-3-3 : 2005 40 7
MS IEC 61000-3-6 : 2001 70 4
MS IEC 61000-3-7 : 2001 50 4
MS IEC 61000-3-8 : 2001 30 4
MS IEC 61000-3-11 : 2005 20 7
MS IEC 61000-4-1 : 2002 80 4
MS IEC 61000-4-2 : 2006 50 8
MS IEC 61000-4-3 : 2006 60 8
MS IEC 61000-4-5 : 2006 50 8
MS IEC 61000-4-6 : 2006 60 8
MS IEC 61000-4-7 : 2003 50 4
MS IEC 61000-4-9 : 2002 40 4
MS IEC 61000-4-10 : 2006 40 8
MS IEC 61000-4-11 : 2005 30 8
MS IEC 61000-4-12 : 2006 40 8
MS ISO/IEC 646 : 1983 30 12
MS ISO 1001 : 1994 30 40
MS ISO 1073 : Pt. 1 : 1993 30 12
MS ISO 1073 : Pt. 2 : 1993 60 12
MS ISO 1155 : 1992 10 28
MS ISO 1177 : 1992 10 28
MS ISO/IEC 1539-1 : 2003 380 16
MS ISO/IEC 1539-2 : 2003 30 16
MS ISO/IEC 1539-3 : 2003 40 16
MS ISO 1745 : 1992 30 28
MS ISO 1831 : 1993 50 12
MS ISO 1860 : 1994 20 40
MS ISO 1863 : 1994 10 41
MS ISO 1864 : 1994 10 41
MS ISO 1989 : 1993 20 16
MS ISO/IEC 2022 : 1993 50 12
MS ISO 2110 : 1992 30 27
MS ISO 2375 : 1993 20 12
MS ISO/IEC 2382-1 : 2005 40 10, 18
MS ISO/IEC 2382/II : 2005 40 10, 18
MS ISO/IEC 2382-3 : 2005 20 10, 19
MS ISO/IEC 2382-4 : 2005 30 10
MS ISO/IEC 2382-5 : 2005 30 10
MS ISO 2382-6 : 2005 20 10, 19
MS ISO/IEC 2382-7 : 2005 90 10
MS ISO/IEC 2382-8 : 2005 40 10
MS ISO/IEC 2382-9 : 2005 50 10
MS IEC 61000-4-14 : 2003 20 8
MS IEC 61000-4-15 : 2003 40 4
MS IEC 61000-4-24 : 2002 20 4
MS IEC 61000-4-30 : 2004 50 8
MS IEC 61000-4-34 : 2006 300 8
MS IEC 61000-5-5- : 2002 40 5
MS IEC 61000-6-2 : 2001 20 5
MS IEC 61326-1 : 2002 40 5
MS IEC 61547 : 2002 30 5
MS IEC 61643-311 : 2004 30 2
MS IEC 61643-321 : 2004 30 2
MS IEC 61800-3 : 2002 100 5
MS IEC 62040-2 : 2002 50 5
MS ISO, MS ISO/IEC , MS ISO/IEC ISP
Standards Number Price (RM) Page
NUMERICAL LISTING
Standards Number Price (RM) Page
56
MS ISO/IEC 6937 : 2003 50 13
MS ISO 6951 : 1994 70 38
MS ISO 7064 : 1994 20 13
MS ISO/IEC 7185 : 1993 80 16
MS ISO TR 7477 : 1992 20 27
MS ISO 7478 : 1993 20 28
MS ISO/IEC 7480 : 1992 20 27
MS ISO/IEC 7487-1 : 1994 20 41
MS ISO 7487-2 : 1994 20 42
MS ISO 7487-3 : 1994 10 42
MS ISO/IEC 7498-1 : 1995 20
MS ISO/IEC 7498-2 : 1995 40 20
MS ISO/IEC 7498-3 : 1995 30 20
MS ISO 7665 : 1994 30 42
MS ISO 7776 : 1993 50 28
MS ISO 7809 : 1993 40 28
MS ISO/IEC 7810 : 2005 160 19
MS ISO/IEC 7811-1 : 1998 40 49
MS ISO/IEC 7811-2 : 1998 230 49
MS ISO/IEC 7811-3 : 1998 230 49
MS ISO/IEC 7811-4 : 1998 230 49
MS ISO/IEC 7811-5 : 1998 230 49
MS ISO/IEC 7811-6 : 1998 230 49
MS ISO/IEC 7811-7 : 2005 230 19
MS ISO/IEC 7812-1 : 1998 20 49
MS ISO/IEC 7812-2 : 1998 30 49
MS ISO/IEC 7813 : 2005 120 19
MS ISO/IEC 7816-1 : 2003 20 40
MS ISO/IEC 7816-2 : 2003 20 40
MS ISO/IEC 7816-3 : 2003 40 40
MS ISO/IEC 7816-4 : 2003 60 49
MS ISO/IEC 7816-5 : 2003 20 40
MS ISO/IEC 7816-6 : 2003 30 50
MS ISO/IEC 7816-7 : 2003 50 50
MS ISO/IEC 7816-8 : 2003 40 40
MS ISO/IEC 7816-9 : 2003 40 40
MS ISO/IEC 7816-10 : 2003 20 40
MS ISO/IEC 7826-1 : 1995 20 13
MS ISO/IEC 7826-2 : 1995 20 13
MS ISO 7929 : 1994 20 42
MS ISO 7942 : 1992 250 35
MS ISO 8063-1 : 1994 (2005) 40 42
MS ISO 8063-2 l 1994 (2005) 10 42
MS ISO 8064 : 1994 (2005) 20 42
MS ISO/IEC 2382-X : 2005 20 19
MS ISO/IEC 2382-12 : 2005 50 39
MS ISO/IEC 2382-13 : 2005 50 36
MS ISO/IEC 2382-14 : 2005 30 10
MS ISO/IEC 2382-15 : 2005 50 16
MS ISO/IEC 2382-16 : 2005 30 11
MS ISO/IEC 2382-17 : 2005 30 11, 47
MS ISO/IEC 2382-18 : 2005 30 11
MS ISO/IEC 2382-19 : 2005 20 38
MS ISO/IEC 2382-20 : 2005 20 19
MS ISO/IEC 2382-21 : 2005 20 39
MS ISO/IEC 2382-22 : 2005 30 38
MS ISO/IEC 2382-24 : 2005 20 51
MS ISO/IEC 2382-25 : 1993 40 34
MS ISO/IEC 2382-27 : 2005 30 45
MS ISO/IEC 2382-28 : 2005 40 51
MS ISO/IEC 2382-29 : 2005 30 11
MS ISO/IEC 2382-31 : 2005 30 11
MS ISO/IEC 2382-32 : 2005 50 11
MS ISO/IEC 2382-34 : 2005 30 11
MS ISO/IEC 2593 : 1992 30 27
MS ISO/IEC 3788 : 1994 20 41
MS ISO 4057 : 1994 40 41
MS ISO 4335 : 1993 60 28
MS ISO 4341 : 1994 20 41
MS ISO/IEC 4873 : 1993 30 13
MS ISO 4902 : 1992 30 27
MS ISO 4903 : 1992 30 27
MS ISO 4909 : 1994 20 53
MS ISO 5138 : Pt. 1 : 1993 30 53
MS ISO 5138 : Pt. 2 : 1993 40 53
MS ISO 5138 : Pt. 3 : 1993 40 53
MS ISO 5138 : Pt. 4 : 1993 20 53
MS ISO 5138 : Pt. 5 : 1993 30 53
MS ISO 5138 : Pt. 7 : 1993 30 53
MS ISO 5138 : Pt. 9 : 1993 40 53
MS ISO 5218 : 1993 10 13
MS ISO 5652 : 1994 30 41
MS ISO 6093 : 1993 20 13
MS ISO 6098 : 1994 20 41
MS ISO/IEC TR 6371 : 1994 30 41
MS ISO/IEC 6429 : 1999 100 13
MS ISO 6596-1 : 1994 20 41
MS ISO 6596-2 : 1994 20 41
MS ISO 6630 : 1993 10 13
MS ISO 6936 : 1993 10 13
Standards Number Price (RM) Page Standards Number Price (RM) Page
NUMERICAL LISTING
57
MS ISO/IEC 8211 : 1995 80 19
MS ISO 8378-1 : 1994 (2005) 20 42
MS ISO 8378-2 : 1994 (2005) 20 42
MS ISO 8378-3 : 1994 (2005) 20 42
MS ISO 8462-1 : 1994 (2005) 50 42
MS ISO 8462-2 : 1994 (2005) 20 43
MS ISO 8471 : 1993 10 28
MS ISO/IEC 8481 : 1998 20 28
MS ISO/IEC 8482 : 1995 30 28
MS ISO/IEC 8613-1 : 1995 100 45
MS ISO/IEC 8613-2 : 1995 270 46
MS ISO/IEC 8613-4 : 1995 50 46
MS ISO/IEC 8613-5 : 1995 120 46
MS ISO/IEC 8613-6 : 1995 90 46
MS ISO/IEC 8613-7 : 1995 60 46
MS ISO/IEC 8613-8 : 1995 60 46
MS ISO/IEC 8613-10 : 1985 370 46
MS ISO 8630-1 : 1994 (2005) 30 43
MS ISO 8630-2 : 1994 20 43
MS ISO 8630-3 : 1994 20 43
MS ISO 8631 : 1992 20 19
MS ISO 8632-1 : 1992 350 36
MS ISO 8632-2 : 1992 100 36
MS ISO 8632-3 : 2003 80 36
MS ISO 8632-4 : 2003 60 36
MS ISO 8648 : 1994 40 29
MS ISO 8651 : Pt. 1 : 1992 120 16
MS ISO 8651 : Pt. 2 : 1992 170 16
MS ISO 8651 : Pt. 3 : 1992 190 16
MS ISO 8651 : Pt. 4 : 1993 200 17
MS ISO/IEC 8802-1 : 1996 30 35
MS ISO/IEC 8802-2 : 2003 30 34
MS ISO/IEC 8802-3 : 2003 1560 34
MS ISO/IEC 8802-4 : 1996 290 35
MS ISO/IEC 8802-5 : 2003 250 34
MS ISO/IEC 8802-6 :96 (03) 90 35
MS ISO/IEC 8802-7 : 1996 120 35
MS ISO/IEC 8802-11 : 2003 540 34
MS ISO 8805 : 1992 380 36
MS ISO/IEC 8806 : PT 4 : 93 280 17
MS ISO 8860-1 : 1994 30 43
MS ISO 8860-2 :1994 20 43
MS ISO 8879 : 1995 (2005) 210 47
MS ISO 8885 : 1995 30 29
MS ISO/IEC 8880-3 : 1995 20 29
MS ISO 8907 : 1993 140 17
MS ISO TR 9007 : 1993 190 21
MS ISO 9069 : 1995 20 47
MS ISO 9070 : 1995 30 47
MS ISO/IEC 9075-1 : 2004 90 17
MS ISO/IEC 9075-2 : 2004 1280 17
MS ISO/IEC 9075-3 : 2004 410 17
MS ISO/IEC 9075-4 : 2004 190 17
MS ISO/IEC 9075-5 : 2004 400 17
MS ISO/IEC 9075-9 : 2004 510 17
MS ISO/IEC 9075-10 : 2004 410 17
MS ISO/IEC 9075-11 : 2004 300 17
MS ISO/IEC 9075-13 : 2004 210 17
MS ISO/ IEC 9126 : 1993 20 19
MS ISO 9171-1 : 1994 40 43
MS ISO 9171-2 : 1994 60 44
MS ISO 9241-1 : 2005 20 39
MS ISO 9241-2 : 2005 10 39
MS ISO 9241-3 : 2005 60 39
MS ISO 9241-4 : 2005 40 39
MS ISO 9241-5 : 2005 40 39
MS ISO 9241-6 : 2005 40 39
MS ISO 9241-7 : 2005 40 39
MS ISO/IEC 9281 : Pt. 1 : 93 10 13
MS ISO/IEC 9281 : Pt. 2 : 92 20 13
MS ISO/IEC 9294 : 1993 20 19
MS ISO/IEC 9293 : 1994 40 43
MS ISO/IEC 9529-1 : 1994 40 43
MS ISO/IEC 9529-2 : 1994 40 43
MS ISO/IEC 9541-1:1995 100 47
MS ISO/IEC 9541-2: 1995(05) 60 47
MS ISO/IEC 9541-3: 1995 80 47
MS ISO 9543 : 1992 20 28
MS ISO/TR 9544 : 1993 50 50
MS ISO/IEC 9545 : 1995 30 31
MS ISO/IEC 9545-1 : 1995 20 31
MS ISO/IEC 9545-2 : 1995 30 31
MS ISO/IEC 9545-3 : 1995 30 31
MS ISO/IEC 9545-5 : 1995 20 31
MS ISO/IEC 9545-6 : 1995 20 31
MS ISO/IEC 9545-7 : 1995 30 31
MS ISO/IEC 9545-8 : 1995 30 31
MS ISO/IEC 8880-1 : 1994 20 29
MS ISO/IEC 8880-2 : 1995 20 29 MS ISO 8208 : 1993 140 29
Standards Number Price (RM) Page
NUMERICAL LISTING
Standards Number Price(RM) Page
58
MS ISO/IEC 9834-1 : 96 (03) 30 21
MS ISO/IEC 9834-2 : 96 (03) 20 31
MS ISO/IEC 9834-4 : 96 (03) 20 32
MS ISO/IEC 9834-5 : 96 (03) 30 32
MS ISO/IEC 9834-6 : 1996 (2003) 20 21
MS ISO/IEC 9899 : 2003 580 17
MS ISO/IEC 9945-1 : 1995 360 17
MS ISO/IEC 9983 : 2004 20 43
MS ISO/IEC 9995-1 : 2001 20 39
MS ISO/IEC TR 10000-1 : 1998 30 21
MS ISO/IEC TR 10000-2: 1998 40 21
MS ISO/IEC TR 10000-3: 1998 20 21,30
MS ISO/IEC 10025-3 : 1995 50 30
MS ISO/IEC TR 10034 : 1994 20 17
MS ISO/IEC TR 10037: 95(05) 20 47,50
MS ISO/IEC 10149 : 2004 50 44
MS ISO/IEC 10160 : 2003 80 34
MS ISO/IEC 10164-1 : 1995 30 32
MSI ISO/IEC 10164-2 : 1995 30 32
MS ISO/IEC 10164-3 : 1995 30 32
MS ISO/IEC 10164-4 : 1995 30 32
MS ISO/IEC 10164-5 : 1995 30 32
MS ISO/IEC 10164-6 : 1995 30 32
MS ISO/IEC 10164-7 : 1995 30 32
MS ISO/IEC 10164-8 : 1995 40 32
MS ISO/IEC 10164-10 : 1998 60 33
MS ISO/IEC 10164-12 : 1995 60 33
MS ISO/IEC 10164-13 : 1998 70 33
MS ISO/IEC 10164-15 : 1998 90 33
MS ISO/IEC 10164-17 : 1998 60 33
MS ISO/IEC 10165-1 : 1995 30 33
MS ISO/IEC 10165-2 : 1995 80 33
MS ISO/IEC 10165-4:96 (2003) 60 33
MS ISO/IEC 10165-5:96 (2003) 30 33
MS ISO/IEC 10165-6 : 2003 50 34
MS ISO/IEC TR 10171 : 1995 20 29
MS ISO/IEC 10177 : 96 (2003) 40 30
MS ISO/IEC 10181-2 : 2003 60 22
MS ISO/TR 9547 : 1993 20 17
MS ISO/IEC TR 9577 : 1996 20 29
MS ISO/IEC 9579 : 2004 130 17
MS ISO 9592-1 : 1992 380 36
MS ISO 9592-2 : 1992 10 36
MS ISO 9592-3 : 1992 40 36
MS ISO 9592-4 : 1996 190 36
MS ISO 9593-1 : 1993 230 36
MS ISO/IEC 9593-4 : 1993 320 36
MS ISO/IEC 9594-1 : 1995 20 31
MS ISO/IEC 9594-2 : 1995 30 31
MS ISO/IEC 9594-3 : 1995 30 31
MS ISO/IEC 9594-4 : 2003 120 34
MS ISO/IEC 9594-5 : 1995 20 31
MS ISO/IEC 9594-6 : 1995 20 31
MS ISO/IEC 9594-7 : 1995 30 31
MS ISO/IEC 9594-8 : 1995 30 31
MS IS/IEC 9596-1 : 1995 50 31
MS ISO/IEC 9596-2 : 1995 80 31
MS ISO/IEC 9636-1 : 1993 90 36
MS ISO/IEC 9636-2 : 1993 50 36
MS ISO/IEC 9636-3 : 1993 160 36
MS ISO/IEC 9636-4 : 1993 50 37
MS ISO/IEC 9636-5 : 1993 100 37
MS ISO/IEC 9636-6 : 1993 50 37
MS ISO/IEC 9637-1 : 96 (03) 80 37
MS ISO/IEC 9637-2 : 96 (03) 90 37
MS ISO/IEC 9646-1 : 96 (03) 60 21
MS ISO/IEC 9646-2 : 96 (03) 50 21
MS ISO/IEC 9646-3 : 1996 50 21
MS ISO/IEC 9646-4 : 96 (03) 30 21
MS ISO/IEC 9646-5 : 96 (03) 50 21
MS ISO/IEC 9646-6 : 96 (03) 30 21
MS ISO 9660 : 1994 40 44
MS ISO 9661 : 1994 60 43
MS ISO 9735-1 : 2000 80 50
MS ISO 9735-2: 2000 20 50
MS ISO 9735-3 : 2000 30 50
MS ISO 9735-4 : 2000 20 50
MS ISO 9735-5 : 2000 60 50
MS ISO 9735-6 : 2000 40 50
MS ISO 9735-7 : 2001 40 51
MS ISO 9735-8 : 2000 20 50
MS ISO 9735-9 : 2000 40 50
MS ISO 9735-10: 2004 120 51
MS ISO/IEC 10373 : 1995 40 51
MS ISO/IEC 10373-3 : 2004 90 44
MS ISO/IEC 10373-6 : 2004 50 44
MS ISO/IEC 10373-7 : 2004 40 45
MS ISO/IEC 10536-1 : 2004 10 45
MS ISO 10588 : 1995 20 30
MS ISO/IEC ISP 10607-1 : 98 20 22
MS ISO/IEC ISP 10607-2 : 98 80 22
MS ISO/IEC ISP 10607-3 : 98 40 22
MS ISO/IEC ISP 10607-4 : 98 50 22
MS ISO/IEC 1SP 10607-5 : 98 50 22
MS ISO/IEC ISP 10607-6 : 98 30 22
MS ISO/IEC ISP 10608-1 : 95 20 22
MS ISO/IEC ISP 10608-2 : 95 20 22
MS ISO/IEC ISP 10608-4 : 95 10 23
MS ISO/IEC ISP 10608-5 : 1995 10 23
MS ISO/IEC ISP 10608-13 : 1995 10 23
MS ISO/IEC ISP 10609 -1 : 1996 30 23
MS ISO/IEC ISP 10609-2 : 96 (2003) 20 23
MS ISO/IEC ISP 10609-3 : 96 (2003) 20 23
MS ISO/IEC ISP 10609-4 : 96 (2003) 20 23
MS ISO/IEC ISP 10609-5 : 95 (2003) 10 23
MS ISO/IEC ISP 10609-6 : 95 (2003) 10 23
MS ISO/IEC ISP 10609-7 : 95 (2003) 10 23
MS ISO/IEC ISP 10609-8 : 95 (2003) 10 24
MS ISO/IEC ISP 10609-9 : 95 (2003) 30 24
MS ISO/IEC ISP 10609-10 : 95 (2003) 60 24
MS ISO/IEC ISP 10609-11 : 95 (2003) 20 24
MS ISO/IEC ISP 10609-12 : 95 (2003) 10 24
MS ISO/IEC ISP 10609-14 : 95 (2003) 20 24
MS ISO/IEC ISP 10611-1 : 1995 40 24
MS ISO/IEC ISP 10611-2 : 1995 20 24
MS ISO/IEC ISP 10611-3 : 1995 40 24
MS ISO/IEC 10611-4 : 2003 80 34
MS ISO/IEC 10611-5 : 2003 60 34
MS ISO/IEC ISP 10613-2 : 96 (2003) 20 24
MS ISO/IEC ISP 10613-3 : 95 (2003) 20 25
MS ISO/IEC 10613-5 : 95 (2003) 20 25
MS ISO/IEC 10613-7 : 95 (2003) 20 25
MS ISO/IEC 10613-8 : 95 (2003) 20 25
MS ISO/IEC 10613-9 : 95 (2003) 10 25
MS ISO/IEC 10641 : 1997 40 37
MS ISO/IEC 10728 : 1995 110 18
MS ISO/IEC 10729-1 : 1995 20 30
MS ISO/IEC TR 10730 : 1995 50 25
MS ISO/IEC 10731 : 1995 30 25
MS ISO/IEC 10732 : 1995 20 30
MS ISO/IEC 10733 : 1995 130 30
MS ISO/IEC TR 10735 : 1995 20 29, 30
MS ISO/IEC 10739-1 : 96 (2003) 160 33
MS ISO/IEC 10740-1 : 1996 20 46
MS ISO/IEC 10740-2 : 1996 20 46
MS ISO/IEC 10742 : 96 (2003) 90 29
MS ISO/IEC 10744 : 95 (2005) 500 47
MS ISO/IEC 10747 : 1995 120 30
MS ISO/IEC 10918-1 : 1995 190 14
MS ISO/IEC 11172-1 : 2003 70 14
MS ISO/IEC 11172-2 : 2003 130 14
MS ISO/IEC 11172-3 : 2003 170 14
MS ISO/IEC 11172-4 : 2003 50 14
MS ISO/IEC 11179-3 : 1995 30 14
MS ISO/IEC ISP 11183-1 : 1995 50 25
MS ISO/IEC ISP 11183-2 : 1995 110 25
MS ISO/IEC ISP 11183-3 : 1995 80 25
MS ISO/IEC ISP 11185-1 : 1995 10 25
MS ISO/IEC ISP 11185-2 : 1995 10 26
MS ISO/IEC ISP 11185-3 : 1995 20 26
MS ISO/IEC ISP 11185-4 : 1995 10 26
MS ISO/IEC ISP 11185-5 : 1995 10 26
MS ISO/IEC ISP 11185-6 : 1995 10 26
MS ISO/IEC ISP 11185-7 : 1995 10 26
MS ISO/IEC ISP 11185-8 : 1995 20 26
MS ISO/IEC ISP 11185-9 : 1995 20 26
MS ISO/IEC ISP 11185-10 : 1995 20 26
MS ISO/IEC ISP 11185-11 : 1995 20 26
MS ISO/IEC ISP 11185-12 : 1998 30 26, 51
MS ISO/IEC ISP 11185-13 : 1998 20 27
MS ISO/IEC ISP 11185-14 : 1998 20 27
MS ISO/IEC ISP 11185-15 : 1998 20 27
MS ISO/IEC ISP 11185-16 : 1998 20 27
MS ISO/IEC ISP 11185-17 : 1998 20 27
MS ISO/IEC 11544 : 1995 100 14
MS ISO/IEC 11458 : 1996 110 38
MS ISO/IEC 11571 : 2003 30 34
MS ISO/IEC 11572 : 2003 150 34
MS ISO/IEC 11574 : 2003 100 35
MS ISO/IEC 11579-1 : 96 (2003) 20 35
MS ISO/IEC 11693 : 2004 20 45
MS ISO/IEC 11694-1 : 2004 10 45
MS ISO/IEC 11770-1 : 2003 30 14
MS ISO/IEC TR 11802-4: 1996 40 35
MS ISO/IEC 12075 : 1996 (2003) 50 39
MS ISO 12083 : 1996 200 48
MS ISO/IEC 12087-2 : 1996 970 37
NUMERICAL LISTING
Standards Number Price Page
(RM)
Standards Number Price Page
(RM)
MS ISO/IEC 15504-3 : 2005 70 20
MS ISO/IEC 15504-4 : 2005 50 20
MS ISO 15622 : 2004 40 51
MS ISO 15623 : 2004 40 51
MS ISO/IEC 15802-2 : 2003 100 35
MS ISO/IEC 15802-3 : 2003 380 35
MS ISO/IEC TR 15802-4 : 96 (2003) 80 35
MS ISO/IEC 16022 : 2003 110 15
MS ISO/IEC 16023 : 2003 60 15
MS ISO/IEC 17799 : 2005 130 15
MS ISO/IEC 18033-1 : 2005 120 15
MS ISO/IEC 18033-3 : 2005 370 15
MS ISO/IEC 18033-4 : 2005 290 15
MS ISO 19101 : 2003 60 51
MS ISO 19105 : 2002 30 15
MS ISO 19107 : 2003 180 52
MS ISO 19108 : 2003 60 52
MS ISO 19111 : 2003 60 52
MS ISO 19113 : 2003 40 52
MS ISO 19115 : 2003 160 52
MS ISO/IEC 20161 : 2003 30 1
MS ISO/IEC 27001 : 2006 50 16
MS ISO/IEC 12119 : 2003 30 19
MS ISO/IEC 12207 : 2003 70 19
MS ISO/IEC 13250 : 2003 50 48
MS ISO/IEC 13213 : 1996 (2003) 150 38
MS ISO/IEC 13240 : 2003 110 19
MS ISO/IEC 13673 : 2003 40 48
MS ISO/IEC 13818 -2 : 2003 230 14
MS ISO/IEC 13886 : 2003 80 48
MS ISO/IEC 13888-1 : 2005 180 14
MS ISO/IEC 13888-2 : 2005 180 14
MS ISO/IEC 13888-3 : 2005 120 14
MS ISO/IEC 14443-1 : 2004 210 45
MS ISO/IEC 14443-2 : 2003 20 45
MS ISO/IEC 14443-3 : 2003 60 45
MS ISO/IEC 14443-4 : 2003 50 45
MS ISO/IEC 14478-1 : 2003 590 37
MS ISO/IEC 14478-2 : 2003 80 37
MS ISO/IEC 14478-3 : 2003 90 37
MS ISO/IEC 14478-4 : 2003 90 37
MS ISO/IEC 14492 : 2003 170 14
MS ISO/IEC 14496-2 : 2003 540 13
MS ISO/IEC 14519 : 2003 900 48
MS ISO/IEC 14598-1 : 2003 30 19
MS ISO/IEC 14598-2 : 2003 20 19
MS ISO/IEC 14598-3 : 2003 30 19
MS ISO/IEC 14598-4 : 2003 50 20
MS ISO/IEC 14598-5 : 2003 50 20
MS ISO/IEC 14764 : 2003 50 20
MS ISO 14817 : 2004 110 51
MS ISO 15394 : 2003 60 15
MS ISO/IEC 15408-1 : 2003 70 15
MS ISO/IEC 15408-2 : 2003 360 15
MS ISO/IEC 15408-3 : 2003 230 15
MS ISO/IEC 15428 : 2003 40 1
MS ISO/IEC 15429 : 2003 60 1
MS ISO/IEC 15430 : 2003 50 1
MS ISO/IEC 15431 : 2003 60 1
MS ISO/IEC 15432 : 2003 50 1
MS ISO/IEC 15433 : 2003 60 1
MS ISO/IEC 15444-1 : 2003 270 1
MS ISO/IEC 15504-1 : 2005 30 20
MS ISO/IEC 15504-2 : 2005 30 20
Standards Number Price Page(RM)
NUMERICAL LISTING
60
Standards Number Price Page(RM)
INDEX
Subject - MS Number - Page Subject - MS Number - Page
61
A
Alphanumeric character sets-OCR A (MS ISO 1073: Pt.1), 12
Alphanumeric character sets-OCR B (MS ISO 1073: Pt.2), 12
Application layer
- Abstract service definition (MS ISO/IEC 9594-3), 31
- Alarm reporting function (MS ISO/IEC 10164-4), 32
- Application layer structure (MS ISO/IEC 9545), 31
- Attributes for representing relationship
(MS ISO/IEC 10164-3), 32
- Authentication framework (MS ISO/IEC 9594-8), 31
- Common management-Specification
(MS ISO/IEC 9596-1), 31
- Definition of management information
(MS ISO/IEC 10165-2), 33
- Event report management function
(MS ISO/IEC 10164-5), 32
- Log control function (MS ISO/IEC 10164-6), 32
- Management information model(MS ISO/IEC 10165-1),33
- Models (MS ISO/IEC 9594-2), 31
- Overview of concepts,models & services
(MS ISO/IEC 9594-1), 31
- Protocol Implementation Conformance Statement
(MS ISO/IEC 9596-2), 31
- Protocol specifications (MS ISO/IEC 9594-5), 31
- Security alarm reporting function
(MS ISO/IEC 10164-7), 32
- Security audit trail function (MS ISO/IEC 10164-8), 32
- Selected attributes types (MS ISO/IEC 9594-6), 31
- Selected object classes (MS ISO/IEC 9594-7), 31
- State management function (MS ISO/IEC 10164-2), 32
- Systems management-Object management function
(MS ISO/IEC 10164-), 32
- Test management function (MS ISO/IEC 10164-12), 33
- Scheduling function (MS ISO/IEC 10164-15), 33
- Summarization function (MS ISO/IEC 10164-13), 33
- Usage metering function for accounting purposes
(MS ISO/IEC 10164-10), 33
- Change over function (MS ISO/IEC 10164-17), 33
Artificial languages - SQL
- Framework (SQL/Framework)
(MS ISO/IEC 9075-1), 17
- Foundation (SQL/Foundation)
(MS ISO/IEC 9075-2), 17
- Call-level interface (SQL/CLI)
(MS ISO/IEC 9075-3), 17
- Persistent stored modules (SQL/PSM)
(MS ISO/IEC 9075-4), 17
- Host language bindings (SQL/BINDINGS)
(MS ISO/IEC 9075-5), 17
- Management of external data (SQL/MED)
(MS ISO/IEC 9075-9), 17
- Object language bindings (SQL/OLB)
(MS ISO/IEC 9075-10), 17
- Information & definition schemas (SQL/
SCHEMATA) (MS ISO/IEC 9075-11), 17
- SQL routines & types using the JAVA
(SQL/JRT) (MS ISO/IEC 9075-13), 17
BBank cards - Magnetic stripe data (MS ISO 4909), 53
Binary floating, Point arithmetic (MS IEC 60559), 18
CChalks - School (MS 1160), 52
Character sets & information coding
- Identification of coding schemes
(MS ISO/IEC 7826-1), 13
- Registration of coding schemes (MS ISO/IEC 7826-2),13
- Digital compression & coding of continuous-tone still
images (MS ISO/IEC 10918-1), 14
- Coded representation of picture & audio information
(MS ISO/IEC 11544), 14
- Basic attributes-data elements (MS ISO/IEC 11179-3),14
Coaxial cables - Radio-frequency (MS 765), 8
Communication cables
- Radiofrequency cables (MS 861:Pt.1), 9
DDangerous goods, packaging
- Safety, storage & handling information (MS 1098), 40
Data communication
- 37 – pole DTE/DCE (MS ISO 4902), 27
- 15 pole DTE/DCE (MS ISO 4903), 27
- (PSTN) CCITT V-series (MS 1299), 38
- 25 pin DTE/DCE (MS ISO 2110), 27
- 24 pin DTE/DCE (MS ISO/IEC 2593), 27
- Multilink procedures (MS ISO 7478), 28
- HLDLC / DTE data link procedures
(MS ISO 7776), 28
- HLDLC, classes (MS ISO 7809), 28
- X.25 packet layer protocol, DTE (MS ISO 8208), 29
Data link layer
- High-level data link control procedures
(MS ISO/IEC 8885), 29
- List of standard data link (MS ISO/IEC TR 10171), 29
- Standard group MAC addresses
(MS ISO/IEC TR 10735), 29, 30
Data processing
- Flow charts, symbols, rules & conventions
(MS 1140), 10
Data processing, check character systems
(MS ISO 7064), 13
Data processing, registration of escape sequences
(MS ISO 2375), 12
Digital - Coded mapping data (MS 1074), 2
Index
Subject - MS Number - Page Subject - MS Number - Page
62
E
Edifact
- Syntax rules to common to all parts
(MS ISO 9735-1), 50
- Syntax rules to batch EDI (MS ISO 9735-2), 50
- Syntax rules specific to interactive EDI
(MS ISO 9735-3), 50
- Syntax & service report message for batch EDI
(MS ISO 9735-4), 50
- Security rules for batch EDI (MS ISO 9735-5), 50
- Secure authentication & acknowledgement message
(MS ISO 9735-6), 50
- Associated data in EDI (MS ISO 9735-7), 51
- Security rules for batch EDI (Confidentiality)
(MS ISO 9735-8), 50
- Security key & certificate management message
(MS ISO 9735-9), 50
Electronic equipment
- Mains operated, Household, safety
(MS IEC 60065), 9
Electromagnetic compatibility
- Power drive systems (PDSs) (MS IEC 61800-3), 5
- Immunity
- Product family standard tools & electric apparatus
(MS CISPR 14-2), 6
- Emission (MS CISPR 14-1), 5
- Limits –
- Limitation of voltage fluctuation & flicker
(MS IEC 61000-3-3), 7
- Voltages changes (MS IEC 61000-3-11), 7
- Emission of harmonic current supply (MS 1555), 5
- Harmonic – Current emissions (MS IEC 61000-3-2), 4
- Environment
- Signalling systems
(MS IEC 61000-2-2), 3, 7
- Industrial plants (MS IEC 61000-2-4), 3, 7
- HEMP
- Radiated disturbance
(MS IEC 61000-2-9),3
- Conducted disturbance (MS IEC 61000-2-10), 3
- Loads
- Distorting loads (MS IEC 61000-3-6), 4
- Fluating loads (MS IEC 61000-3-7), 4
- Signalling on low –voltage installations
(MS IEC 61000-3-8), 4
- Testing & measurement
- Voltage dips, short interruptions voltage
(MS IEC 61000-4-11), 8
- Harmonic & inter harmonics measurements
(MS IEC 61000-4-7), 4
- Public medium-voltage power supply
systems (MS IEC 61000-2-12), 4
- Power quality measurement methods
(MS IEC 61000-4-30), 8
- Immunity test (MS IEC 61000-4-1), 4
- Pulse magnetic field immunity test
(MS IEC 61000-4-9), 4
- HEMP conducted disturbance (MS IEC 61000-4-24), 4
- Voltage fluctuation immunity test (MS IEC 61000-4-14), 8
- Flickmeter-functional and design specifications
(MS IEC 61000-4-15), 4
- Installation and mitigation guideline
- HEMP conducted disturbance
(MS IEC 61000-5-5), 5
- Immunity for industrial environment
(MS IEC 61000-6-2), 5
Electrotechnical vocabulary:
- Power electronics, harmonic analysis
(MS IEC 60050-551-20), 3
Envelopes
- For storage of X-ray films (MS 856), 52
Ergonomic
- Office works, VDTs
- General introduction (MS ISO 9241-), 39
- Guidance on task requirements (MS ISO 9241-2), 39
- Visual display requirements (MS ISO 9241-3), 39
- Keyboard requirements (MS ISO 9241-4), 39
- Workstation layout and postural requirements
(MS ISO 9241-5), 39
- Guidance on the work environment
(MS ISO 9241-6), 39
- Requirements for display with reflections
(MS ISO 9241-7), 39
G
Geographic information
- Conformance and testing (MS ISO 19105), 8
- Features and attribute code (MS 1759), 11
- Metadata referencing by coordinates(MS ISO 19115),60
- Reference model (MS ISO 19101), 59
- Spatial schema (MS ISO 19107), 59
- Spatial referencing by coordinates (MS ISO 19111), 60
- Temporal schema (MS ISO 19108), 59
- Quality principles (MS ISO 19113), 60
IIdentification cards
- Contactless intergrated circuit cards
(MS ISO/IEC 10536-1), 49
- Proximity cards
- Physical characteristics
(MS ISO/IEC 14443-1), 49
- Radio frequency power and signal interface
(MS ISO/IEC 14443-2), 49
- Initialization and anticollision
(MS ISO/IEC 14443-3), 50
- Transmission protocol (MS ISO/IEC 14443-4), 50
- Embossing (MS ISO/IEC 7811:Pt.1), 55
- Financial transaction cards (MS ISO/IEC 7813), 56
- Location of embossed characters
(MS ISO/IEC 7811:Pt.3), 55
- Location of read-only magnetic tracks
(MS ISO/IEC 7811:Pt.4), 55
- Location of read-write magnetic tracks
(MS ISO/IEC 7811:Pt.5), 55
- Optical memory cards - General characteristics
(MS ISO/IEC 11693), 49
- Optical memory cards - Linear recording method
(MS ISO/IEC 11694-1), 49
- Magnetic stripe – High coercivity(MS ISO/IEC 7811-6),55
- Numbering system (MS ISO/IEC 7812-1), 56
- Numbering system and registration procedure
(MS ISO/IEC 7812-2), 56
- Physical characteristics (MS ISO/IEC 7810), 55
- Recording technique, magnetic stripe
(MS ISOIEC 7811:Pt.2), 55
- Integrated circuit cards with contact
- Additional commands and security attributes
(MS ISO/IEC 7816-9), 43
- Dimensions and location of the contacts
(MS ISO/IEC 7816-2), 43
- Electronic signals and answer to reset
(MS ISO/IEC 7816-10), 43
- Electronic signals and transmission protocols
(MS ISO/IEC 7816-3), 43
- Inter industry command for interchange
(MS ISO/IEC 7816-4), 56
- Inter industry data element (MS ISO/IEC 7816-6),56
- Inter industry command for SCQL
(MS ISO/IEC 7816-7), 56
- Physical characteristics (MS ISO/IEC 7816-1), 42
- Security related inter industry command
(MS ISO/IEC 7816-8), 43
Information technology, Coding of moving pictures
- Digital storage
- Conformance testing (MS ISO/IEC 11172-4), 6
- Systems (MS ISO/IEC 11172-1), 6
- Video (MS ISO/IEC 11172-2), 6
- Audio (MS ISO/IEC 11172-3), 6
- Video
- Content description data (MS ISO/IEC 13818-2), 7
- Process assessment
- Concepts & vocabulary (MS ISO/IEC 15504-1),14
- Guidance on assessment
(MS ISO/IEC 15504-3),14
- Guidance on process improvement
(MS ISO/IEC 15504-4),14
- Software development (MS ISO/IEC 15504-2), 14
Information technology – Picture coding
- Identification (MS ISO/IEC 9281-1), 13
- Procedure for registration (MS ISO/IEC 9281-2), 13
IT Security techniques
- Introduction and general model
(MS ISO/IEC 15408-1), 15
- Security functional requirements
(MS ISO/IEC 15408-2), 15
- Security assurance requirements
(MS ISO/IEC 15408-3), 15
IT Security
- Concepts and models (MS 1536:Pt.1), 11
- Managing and planning (MS 1536:Pt.2), 11
- Management techniques (MS 1536:Pt.3), 11
- Selection of safeguards (MS 1536:Pt.4), 12
- Code of practice (MS ISO/IEC 17799), 15
- Network security (MS 1536:Part 5), 12
- Management systems (MS 1537), 12
Information technology equipment
- Radio disturbance characteristics (MS CISPR 22), 7
- Immunity – Measurement (MS CISPR 24), 2
Information technology
- Coding
- Audio-Visual object
- Visual (MS ISO/IEC 14496-2), 15
- Bi-level images (MS ISO/IEC 14492), 14
- JPEG 2000 image
- Core coding systems (MS ISO/IEC 15444-1), 1
- Computer graphic and image processing, PREMO
- Fundamental (MS ISO/IEC 14478-1), 37
- Foundation component as a MS
(MS ISO/IEC 14478-2), 37
- Multimedia systems services (MS ISO/IEC 14478-3), 37
- Modelling, rendering and interaction component
(MS ISO/IEC 14478-4), 37
- Equipment, safety
- General requirements (MS IEC 60950-), 47
- HDLC (MS ISO 4335), 28
- Authentication supplementary services
(MS ISO/IEC 15432), 1
- SS-WTAT and SS-WTAN
- Q point between PISN and PINXs
(MS ISO/IEC 15433), 1
- SS-WTLR, ANF-WTINFO
- Various basic services - PISN
(MS ISO/IEC 15428), 1
- Q point between PISN and PINXs
(MS ISO/IEC 15429), 1
- ANF-WTMI, ANF-WTMO
- PISN (MS ISO 15430), 1
- Q point between PISN and PINXs
(MS ISO 15431), 1
- QSIG
- Q point between PISN and PINXs
(MS ISO/IEC 20161), 1
- International symbology specification
- Data matrix (MS ISO/IEC 16022), 15
63
- Maxi code (MS ISO/IEC 16023), 15
- ISMID (MS ISO/IEC 13240), 19
- Key management
- Framework (MS ISO/IEC 11770-1), 14
- Language-Independent Procedure Calling (LIPC)
(MS ISO/IEC 13886), 48
- POSIX ADA language (MS ISO/IEC 14519), 48
- SGML applications,
- Conformance testing (MS ISO/IEC 13673), 48
- Topic maps (MS ISO/IEC 13250), 48
- Software
- Documentation, management (MS ISO/IEC 9294), 19
- Evaluation
- General overview (MS ISO/IEC 14598-1), 19
- Planning and management (MS ISO/IEC 14598-2), 19
- Process for developers (MS ISO/IEC 14598-3), 19
- Process for acquirers (MS ISO/IEC 14598-4), 20
- Process for evaluators (MS ISO/IEC 14598-5), 20
- Life cycles (MS ISO/IEC 12207), 19
- Maintenance (MS ISO/IEC 14764), 20
Information technology, Information
- Processing
- Basic mode control procedure for data
communication (MS ISO 1745), 28
- Database language NDL (MS ISO 8907), 17
- Software, product evaluations
(MS ISO/IEC 9126), 19
- Systems, data communication HDLC procedures
(MS ISO 8471), 28
- Character structure for start/stop
(MS ISO 1177), 28
- Coded character sets, General
(MS ISO/IEC 6937), 13
- Control functions, coded character sets
(MS ISO IEC 6429), 13
Information and documentation
- OSI - Interlibrary loan application service definition
(MS ISO/IEC 10160), 34
- Electronic manuscript preparation and markup
(MS ISO 12083), 48
Information processing
- Arrangement for interconnection of DTE
(MS ISO/TR 7477), 27
- Concepts & terminology for the conceptual scheme &
Info base (MS ISO/TR 9007), 21
- Conversion 2 coded characters set (MS ISO 6936), 13
- Data interchange on 6.30 mm (0.25 in) magnetic tape
cartridge (MS ISO 4057), 41
- Data interchange on 130 mm (5.25 in) flexible
disk cartridge using two-frequency
- Dimensional, physical and magnetic
(MS ISO 6596 :Pt.1), 41
- Track format (MS ISO 6596 :Pt.2), 41
- Data interchange on 130 mm (5.25 in) flexible disk
cartridge using modified frequency, 1.9 tpmm (48 tpi)
- Dimensional, physical and magnetic
(MS ISO 7487 : Pt. 1), 41
- Track format A (MS ISO 7487 : Pt. 2), 42
- Track format B (MS ISO 7487 : Pt. 3), 42
- Data interchange on 6.30 mm (0.25 in) wide magnetic
tape cartridges using recording
- Mechanical, physical and magnetic
(MS ISO 8063 :Pt.1), 42
- Track format and methods of recording
(MS ISO 8063 :Pt.2), 42
- Reels for 12.7 mm (0.5 in) wide magnetic tapes
(MS ISO 8064), 42
- Data interchange on 6.30 mm (0.25 in) magnetic tape
Index
Subject - MS Number - Page Subject - MS Number - Page
64
- Longitudinal parity to detect errors
(MS ISO 1155), 28
- Numerical values representation
(MS ISO 6093), 13
- Representation of sexes (MS ISO 5218), 13
- Synchronous transmission signal quality
(MS ISO 9543), 28
- Technology
- IEC 821 WMEbus , 1-4 byte date
(MS IEC 60821), 38
- CGI, Functional specification
- Control (MS ISO/IEC 9636:Pt.2), 36
- Input & echoing (MS ISO/IEC 9636:Pt.5), 37
- Output (MS ISO/IEC 9636:Pt.3), 36
- Overview, profiles & conformance
(MS ISO/IEC 9636:Pt.1), 36
- Raster (MS ISO/IEC 9636:Pt.6), 37
- Segment (MS ISO/IEC 9636:Pt.4), 37
using GCR recording
- Mechanical, physical and magnetic
(MS ISO 8462 : Pt. 1), 42
- Streaming mode (MS ISO 8462 : Pt. 2), 42
- Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulations
recording at 13, 262 ftprad, on 80 tracks on each side
- Dimensional, physical and magnetic
(MS ISO 8630 : Pt. 1), 43
- Track A for 77 tracks (MS ISO 8630 : Pt. 2), 43
- Track B for 80 tracks (MS ISO 8630 : Pt. 3), 43
- Data interchange on 90 mm (3.5 in) flexible disk
cartridge using modified frequency modulations
recording at 7958 ftprad on 80 tracks on each side
- Dimensional, physical and magnetic
(MS ISO 8860 : Pt. 1), 43
- Track format (MS ISO 8860 : Pt. 2), 43
- Data interchange on 12.7 mm wide magnetic tape
cartridges - 18 tracks 1491 data bytes per millimetre
(37871 data bytes per inch) (MS ISO 9661), 43
- Designation of unrecorded flexible disk cartridges
(MS ISO/IEC 9983), 43
- 9 track, 12.7 mm (0.5 in) wide magnetic tape for
information interchange using phase encoding at
126 ffpmm (32 ftp) - 63 cpmm (1600 cpi)
(MS ISO/IEC 3788), 41
- Unrecorded optical disk cartridge (MS ISO 9171: Pt. 1), 43
- Recording format (MS ISO 9171: Pt. 2), 44
- Database languages – SQL
- Framework (SQL/Framework)
(MS ISO/IEC 9075-1), 17
- Foundation (SQL/Foundation)
(MS ISO/IEC 9075-2), 17
- Call-level interface (SQL/CLI)
(MS ISO/IEC 9075-3), 17
- Persistent stored modules (SQL/PSM)
(MS ISO/IEC 9075-4), 17
- Host language bindings (SQL/BINDINGS)
(MS ISO/IEC 9075-5), 17
- Management of external data (SQL/MED)
(MS ISO/IEC 9075-9), 17
- Object language bindings (SQL/OLB)
(MS ISO/IEC 9075-10), 17
- Information & definition schemas (SQL/
SCHEMATA) (MS ISO/IEC 9075-11), 17
- SQL routines & types using the JAVA (SQL/JRT)
(MS ISO/IEC 9075-13), 17
- Data interchange on read-only 120 mm optical discs
(MS ISO 10149), 44
- Unrecorded 12.7 mm (0.5 ion) wide magnetic tape for
information interchange
- 32 ftpmm (800 ftpi), NR21, 126 ffpmm (3200 tpi)
phase
encoded & 3456 ftpm (9042 ftpi) NR21
(MS ISO 1864), 41
- Hypermedia/time based structuring language (Hytime)
(MS ISO/IEC 10744), 47
- Specification for data descriptive file
(MS ISO/IEC 8211), 19
- Unrecorded 12.7 mm (0.5 in) wide magnetic tape
(MS ISO 1863), 41
- Vocabulary
- Fundamental terms (MS ISO/IEC 2382/), 10, 18
- Arithmetic and logic operations
(MS ISO 2382/II), 10, 18
- Equipment technology (MS ISO 2382-3), 10, 19
- Organization of data (MS ISO/IEC 2382-4), 10
- Representation of data (MS ISO/IEC 2382-5), 10
- Preparation & handling of data
(MS ISO 2382-6), 10, 19
- Computer programming (MS ISO/IEC 2382-7), 10
- Security (MS ISO/IEC 2382-8), 10
- Data communication (MS ISO/IEC 2382-9), 10
- Operating techniques and facilities
(MS ISO/IEC 2382/X), 18
- Peripheral equipment (MS ISO/IEC 2382-12), 39
- Computer graphics (MS ISO/IEC 2382-13), 36
- Reliability, maintainability & availability
(MS ISO/IEC 2382-14), 11
- Programming languages (MS ISO/IEC 2382-15), 16
- Data Interchange on 130 mm (5.25 in) flexible disk
cartridge using modified frequency modulation at 7958
ftprad, 3.8 tpmm (96 tpi).
- Dimensional, physical and magnetic characteristics
(MS ISO 8378:Pt.1), 42
- Track format A (MS ISO 8378:Pt.2), 42
- Track format B (MS ISO 8378:Pt.3), 42
- Data interchange on 90 mm (3.5 in) flexible disk
cartridges using modified frequency modulation
recording at 15916 ftprad, on 80 tracks on each side
- Dimensional, physical and magnetic
(MS ISO/IEC 9529: Pt. 1), 43
- Track formation (MS ISO/IEC 9529: Pt. 2), 43
- Interchange practices and test methods for
unrecorded instrumentation magnetic tape
(MS ISO/IEC TR 6371), 41
Information technology
- Bit coded character set for information interchange
(MS ISO/IEC 646), 12
- 8 Bit coded for information interchange
(MS ISO/IEC 4873), 13
- Character code structure & extension techniques
(MS ISO/IEC 2022), 12
- 130 mm optical disk cartridge, write, once,
65
- File structure and labelling of flexible disk
cartridges (MS ISO 7665), 42
- File structure & labelling of magnetic tapes
(MS ISO 1001), 40
- Format and recording using group coding
(MS ISO 5652), 41
- Graphical kernel systems – Language bindings
- FOTRAN (MS ISO 8651:Pt.1), 16
- PASCAL (MS ISO 8651:Pt.2), 16
- ADA (MS ISO 8651:Pt.3), 16
- C (MS ISO 8651:Pt.4), 17
- Three dimensions (GKS-3D)
(MS ISO/IEC 8806:Pt.4), 17
- Functional description (MS ISO 7942), 35
- Guidelines for the documentation (MS 1277), 18
- Information processing systems computer graphics
- Functional specification (MS ISO 8632:Pt.1), 36
- Character encoding (MS ISO 8632:Pt.2), 36
- Binary encoding (MS ISO/IEC 8632-3), 36
- Clear – text encoding (MS ISO/IEC 8632-4), 36
- Information processing systems – computer graphics
- Graphical kernel systems for three dimension
(GKS-3D ) functional description
(MS ISO 8805), 36
- Magnetic tape cassette and cartridge
(MS ISO 4341), 41
- Magnetic disk for data storage devices
(MS ISO 7929), 42
- Open systems interconnection internal organization of
the network layer (MS ISO 8648), 29
- Precision reels, magnetic tape
- Used in interchange instrumentation applications
(MS ISO 1860), 40
- 9-track, 12.7 mm (0.5 in) wide magnetic tape
(MS ISO 1863), 41
- Program construction & conventions for their represen
tation (MS ISO 8631), 19
- Self loading cartridges (MS ISO 6098), 41
- User documentation & cover information
(MS 1278), 18
- Volume and file structure of flexible disk cartridges
(MS ISO/IEC 9293), 43
- Volume and file structure of CD ROM
(MS ISO 9660), 44
- Start-stop transmission, DTE/DCE interfaces
(MS ISO/IEC 7480), 27
- SGML (MS ISO 8879), 47
Index
66
Subject - MS Number - Page Subject - MS Number - Page
- Information theory (MS ISO/IEC 2382-16), 11
- Databases (MS ISO/IEC 2382-17), 47
- Distributed data processing
(MS ISO/IEC 2382-18),11
- Analog computing (MS ISO 2382-19), 38
- System development (MS ISO/IEC 2382-20), 18
- Interfaces – computer system & technical
processes (MS ISO 2382-21), 39
- Calculators (MS ISO 2382-22), 38
- Computer-integrated manufacturing
(MS ISO/IEC 2382-24), 51
- Local area networks (MS ISO/IEC 2382:Pt.25), 34
- Office automation (MS ISO/IEC 2382-27), 45
- Artificial intelligence (MS ISO/IEC 2382-28), 51
- Speech recognition and synthesis
(MS ISO/IEC 2382-29), 11
- Machine learning (MS ISO/IEC 2382-31), 11
- Electronic mail (MS ISO/IEC 2382-32), 11
- Neural networks (MS ISO/IEC 2382-34), 11
- Computer assisted publishing (MS ISO/TR 9544),50
- Process assessment
- Concept and vocabulary
((MS ISO/IEC 15504-1), 20
- Performing an assessment
(MS ISO/IEC 15504-3), 20
- Part 4 : Process improvement & process capability
(MS ISO/IEC 15504-4), 20
Internal combustion engine
- Ignition system, Radio disturbances( MS 399), 2
IPS - Computer graphics - Programmers Hierarchical
- Functional description (MS ISO 9592:Pt. 1), 36
- FOTRAN (MS ISO/IEC 9593-1), 36
- Archive file format (MS ISO 9592:Pt. 2), 36
- Clear-text encoding or archive file (MS ISO/IEC 9592-3)
36
- interactive graphics systems (MS ISO/IEC 9592-4), 36
IT application in banking
- BANSTA (MS 1482), 48
- CREMUL (MS 1483),48
- DEBMUL (MS 1484), 48
- PAYMUL (MS 1481), 48
- UNSM (MS 1486), 48
- SANCRT (MS 1485), 48
- Financial card-Security-Card life cycle
(MS ISO 10202:Part 1), 50
- Identification card
- Test methods (MS ISO/IEC 10373), 51
- Contactless cards-Physical characteristics
(MS ISO/IEC 10536:Pt.1), 45
- Integrated cards-Physical characteristics
(MS ISO 7816-1), 40
- Integrated cards-Dimensions & location (MS ISO 7816-2), 40
- Integrated cards-Electronic signals (MS ISO 7816-3), 40
- Integrated cards-Numbering system & registration
(MS ISO 7816-5), 40
- SGML - Directed editing systems (MS ISO/IEC TR 10037), 50
IT application in office work
- ODA-Introduction & general principles
(MS ISO/IEC 8613:Part 1), 45
- ODA-Document structures (MS ISO/IEC 8613:Part 2), 46
- ODA-Document profile (MS ISO/IEC 8613:Pt.4), 46
- ODA-Offfice document interchange format (ODIF)
(MS ISO/IEC 8613:Pt.5), 46
- ODA-Character content architectures
(MS ISO/IEC 8613:Pt.6), 46
- ODA-Raster graphics content architectures
(MS ISO/IEC 8613:Pt.7), 46
IT Customer premises cabling (MS ISO/IEC 12075), 39
IT Microprocessor systems
- Control and status register (CSR) architecture
(MS ISO/IEC 13213), 38
- ODA-Geometric graphics content architectures
(MS ISO/IEC 8613:Pt.8), 46
- ODA-Formal specification (MS ISO/IEC 8613:Pt.10), 46
IT application in information documentation & publishing
- SGML document interchange format
(MS ISO 9069), 47
- SGML support facilities registration procedures
(MS ISO 9070), 47
- Font information-Architecture (MS ISO/IEC 9541:Pt 1),47
- Font information-Interchange format
(MS ISO/IEC 9541:Part 2), 47
- Font information-Glyph shape representation
(MS ISO/IEC 9541:Pt.3), 47
- Hypermedia/Time-based structuring language
(MS ISO/IEC 10744), 47
IT - Computer graphics - Interfacing techniques for dialogues
with graphical devices (CGI)
- Data steam bending:
- Character encoding (MS ISO/IEC 9637-1), 37
- Binary encoding (MS ISO/IEC 9637-2), 37
IT - computer graphics and image processing
- Procedures for registration of graphical items
(MS ISO/IEC 10641), 37
- Conformance testing of implementation of graphic
standards (RA) (MS ISO/IEC 12087-2), 37
IT computer graphics – PHIGS
- C (MS ISO/IEC 9593-4), 36
- Generic management information (MS ISO/IEC 10165-5), 33
- equirements and guidelines for implementation
conformance statement proforma associated with
OSI management (MS ISO/IEC 10165-6), 34
IT - OSI - Conformance test suite for ISO 9041-1, virtual
terminal basic class protocol
- Test suite structure and test purposes
(MS ISO/IEC 10739-1), 33
IT – Software packages
- Quality requirements and testing
(MS ISO/IEC 12119), 19
IT-Telecommunication and information exchange between
systems -
Local and metropolitan area networks:
- Common specifications
- LAN/MAN management (MS ISO/IEC 15802-2), 35
- Media access control (MAC) bridges
(MS ISO/IEC 15802-3), 35
- Overview of local area network standards
(MS ISO/IEC 8802-1), 35
- Overview of local area network standards
(MS 1730:Part 1), 18
- Logical link control (MS ISO/IEC 8802-2), 34
- Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical
layer specifications (MS ISO/IEC 8802-3), 34
- Token-passing bus access method and5
physical layer specifications
(MS ISO/IEC 8802-4) 35
- Token ring access method and physical
layer specifications (MS ISO/IEC 8802-5), 34
- Distributed queu dual bus (DQDB) access
method and physical specifications
(MS ISO/IEC 8802-6), 35
- Slotted ring access method and physical layer
specification (MS ISO/IEC 8802-7), 35
- Wireless LAN medium access control (MAC) and
Physical layer (PHY) (MS ISO/IEC 8802-11), 34
- Token ring access method and physical layer
specifications - Fibre optic station attachment
(MS ISO/IEC TR 11802-4), 35
- System local protocol (MS ISO/IEC TR 15802-4), 35
- Numbering and sub-addressing in private integrated
services networks (MS ISO/IEC 11571), 35
- Private integrated services network (MS ISO/IEC 11572), 34
- Circuit mode bearer services-interexchange
signalling procedurs and protocol
- Service description, functional capabilities and
flows (MS ISO/IEC 11574), 35
- Private integrated services network
Reference configuration for PISN exchanges
(PINX) specifications (MS ISO/IEC 11579-1), 35
IT - OSI - Conformance testing methodology and framework
- General concepts (MS ISO/IEC 9646-1), 21
- The tree and combined notation (TTCN)
(MS ISO/IEC 9646-3), 21
- Test realization (MS ISO/IEC 9646-4), 21
- Requirements or test laboratories and clients
(MS ISO/IEC 9646-5), 21
- Clients for the conformance assessment process
- Protocol profile test specification (MS ISO/IEC 9646-6),
21
IT – Open System Interconection
- Procedures for distributed operation
(MS ISO/IEC 9594-4), 34
IT – Keyboard layouts (MS ISO/IEC 9995-1), 39
IT – Programming language
- C (MS ISO/IEC 9899), 17
IT - ISP TB, TC, TD and TE - Connection-mode transport service
over connection-mode network service
- Subnetwork-type independent requirements
for group TB (MS ISO/IEC ISP 10609-1), 23
- Subnetwork-type independent requirements
for Group TC (MS ISO/IEC ISP 10609-2), 23
- Subnetwork-type independent requirements
for Group TD (MS ISO/IEC ISP 10609-3), 23
- Subnetwork-type independent requirements
for Group TE (MS ISO/IEC ISP 10609-4), 23
IT - International standardised profile RA - relaying the
connectionless-mode network service
- LAN subnetwork dependent, media-independent
(MS ISO/IEC ISP 10613-2), 24
requirements
IT – International standardised profiles AMNH1n
- Common messaging
- AMH12 and AMH14 – MTS access (P3)
(MS ISO/IEC 10611-4), 34
- MH13 – MS access (P7) (MS ISO/IEC 10611-5), 34
IT - OSI Procedures for the operation of OSI registration
authorities
- General procedures (MS ISO/IEC 9834-1), 21
- Registration procedures for OSI document
(MS ISO/IEC 9834-2), 31
- Register of VTE profiles (MS ISO/IEC 9834-4), 32
- Register of VT control object definitions
(MS ISO/IEC 9834-5), 32
- Application processes and entities
(MS ISO/IEC 9834-6), 21
- Guidelines for the definition of managed
(MS ISO/IEC 10165-4), 33
67
Index
68
Subject - MS Number - Page Subject - MS Number - Page
IT-Telecommunications and information exchange between
systems
- 34 Pole DTE/DCE interface connector
(MS ISO/IEC 2593), 27
- Management information, Open system and OSI data
link layer (MS ISO/IEC 10742), 29
- Elements of management information related to
OSI data link layer standards (MS ISO/IEC 10740-2), 46
- Protocol identification in the network layer
(MS ISO/IEC TR 9577), 29
- Provision of the connection-mode network internal
layer service by intermediate systems using
ISO/IEC 8208, the X-25 packet layer protocol
(MS ISO/IEC 10177), 30
IT-Text and office systems - office document interchange
format
- Testing methodology (MS ISO/IEC 10183-1), 46
- Framework for abstract test cases
(MS ISO/IEC 10183-2), 46
IT-Text and office systems - Referenced data transfer
- Abstract service definition (MS ISO/IEC 10740-1),46
- Electromagnetic disturbance characteristics
(MS CISPR 11), 5
L
Languages used in information technology
- Generic model, service & protocol
(MS ISO/IEC 9579), 17
- System application interface (C language)
(MS ISO/IEC 9945-1), 17
- Information Resource Dictionary System
services interface (MS ISO/IEC 10728), 18
- Guidelines for their development & acceptability
(MS ISO/TR 9547), 17
- Guidelines for languages bindings
(MS ISO/IEC TR 10182), 17, 22
M
Magnetic
- Tapes
- File structure and labelling (MS ISO 1001), 40
Microprocessor system
- Binary floating (MS IEC 60559), 18
- Edge connectors (MS IEC 60796:Part 2), 38
- Fastbus modular high-speed data acquisition
- Functional description (MS IEC 60796: Pt. 1), 38
- Urochord configuration (MS IEC 60796: Pt. 3), 38
- Universal format for object modules
(MS IEC 60975), 39
- VMS bus-serial sub system bus
(MS IEC 60823), 38
- Processor system bus interface (MS ISO 6951), 38
- VICbus-inter-carte cable bus (MS ISO/IEC 11458), 38
Minimal BASIC (MS 1201), 16
NNetwork layer
- General principles (MS ISO/IEC 8880-1), 29
- Provision & support of the connection-mode
(MS ISO/IEC 8880-2), 29
- Provision & support of the connectionless-mode
(MS ISO/IEC 8880-3), 29
- In conjunction with X.21/X.21 bis to provide the OSI
(MS ISO/IEC 10588), 30
- To provide the OSI connection-mode over telephone
(MS ISO/IEC 10732), 30
- Elements of management information
(MS ISO/IEC 10733), 30
- Protocol for exchange of inter-domain routing
(MS ISO/IEC 10747), 30
Newsprint (MS 855), 52
O
OCR, printing specifications (MS ISO 1831), 12
OCR, character sets and printed image
- A-shapes (MS ISO 1073:Part 1), 12
- B-shapes (MS ISO 1073:Part 2), 12
Office furniture
- Vocabulary
- Addressing machines (MS ISO 5138:Pt.3), 53
- Dictation equipment (MS ISO 5138:Pt.1), 53
- Duplicators (MS ISO 5138:Pt.2), 61
- Letter folding machines (MS ISO 5138:Pt.5), 53
- Letter opening machines (MS ISO 5138: Pt.4), 53
- Postal franking machines (MS ISO 5138:Pt.7), 53
- Typewriters (MS ISO 5138:Pt.9), 53
Open Systems Interconnection (OSI)
- Authentication framework (MS ISO/IEC 10181-2), 22
- Basic model (MS ISO/IEC 7498-1), 20
- Security architecture (MS ISO/IEC 7498-2), 20
- Naming & addressing (MS ISO/IEC 7498-3), 20
- Framework (MS ISO/IEC TR 10000-1), 21
- Principles & taxonomy for OSI profiles
(MS ISO/IEC TR 10000-2), 21
- Principles & taxonomy for open system environment
profiles (MS ISO/IEC TR 10000-3), 21, 30
- ACSE, presentation & session protocols for the
use by FTAM (MS ISO/IEC ISP 10607-1), 22
- Definition of document types, constrain
sets & syntaxe (MS ISO/IEC ISP 10607-2), 22
- AFT11-Simple file transfer service (unstructured)
(MS ISO/IEC ISP 10607-3), 22
- AFT12-Positional file transfer service (flat)
(MS ISO/IEC ISP 10607-4), 22
- AFT22-Positional file access service (flat)
(MS ISO/IEC ISP 10607-5), 22
- File transfer, access & management
(MS ISO/IEC ISP 10607-6), 22
media-dependent requirements
(MS ISO/IEC ISP 10613-3), 25
- Definition of profile RA51.51,relaying the
connectionless-mode network services
(MS ISO/IEC ISP 10613-5), 25
- PSDN subnetwork-dependent, media-dependent
requirements for virtual calls
(MS ISO/IEC ISP 10613-7), 25
Physical layer
- 34-pole DTE/DCE interface connector
(MS ISO/IEC 2593), 27
- Twisted pair multipoint interconnections
(MS ISO/IEC 8482), 28
- DTE to DTE direct connections (MS ISO/IEC 8481), 28
Pin allocations IEC 603-2 connector (MS IEC 60828), 38
Presentation layer-Test suite structure & test purposes
(MS ISO/IEC 10729-1), 30
Programming language
- COBOL (MS ISO 1989), 16
- Extended PASCAL (MS ISO/IEC 10206), 17
- FORTRAN
- Base language (MS ISO/IEC 1539-1), 16
- Varying length character strings
(MS ISO/IEC 1539-2), 16
- Conditional compilation (MS ISO/IEC 1539-3), 16
- FULL BASIC (MS ISO/IEC 10279), 18
- Guidelines for the preparation of conformity clauses
(MS ISO/IEC TR 10034), 17
- Minimal BASIC (MS 1201), 16
- PASCAL (MS ISO/IEC 7185), 16
- Test methods (MS ISO/TR 9547), 17
R
Radio communication, mobile – impulsive noise (MS CISPR 21), 2
Radio disturbance
- Electrical appliances - emission (MS CISPR 14-1), 5
- Product famiIy standard (MS CISPR 14-2), 5
- Electrical appliances (MS 71), 2
- Limits & methods of measurement
- Board vehicles, boats and on devices
( MS CISPR 25), 7
- Equipment (MS CISPR 22), 7
- Vehicles, boats & internal combustion engine
(MS CISPR 12), 5
- Measuring equipment (MS 73), 2
- Immunity measuring apparatus
- Part 1-1 : Measuring apparatus (MS CISPR 16-1-1), 6
- Part 1-2 : Ancillary equipment (MS CISPR 16-1-2), 6
- Part 1-3 : (MS CISPR 16-1-3), 6
- Part 1-4 : Radiated disturbances (MS CISPR 16-1-4), 6
- Part 1-5 : Antenna calibration (MS CISPR 16-1-5), 6
- Part 2-1 : Disturbance measurements
(MS CISPR 16-2-1), 6
- Part 2-2 : Disturbance power (MS CISPR 16-2-2), 6
- Radiated disturbance measurement
(MS CISPR 16-2-3), 6, 7
- Immunity measurement (MS CISPR 16-2-4), 6, 7
- Uncertainties (MS CISPR 16-4-2), 6
- Suppression on marine installations ((MS 588), 3
- Electrical lighting & similar equipment
(MS CISPR 15), 6
Index
69
Subject - MS Number - Page Subject - MS Number - Page
- Using virtual calls over a PSTN leased line
permanent access (MS ISO/IEC ISP 10613-8), 25
- Using virtual calls over a digital data circuit/CSDN
leased line permanent access
(MS ISO/IEC ISP 10613-9), 25
- Tutorial on naming & addressing
(MS ISO/IEC TR 10730), 25
- Conventions for the definition of OSI services
(MS ISO/IEC 10731), 25
- Specification of ACSE presentation & session
- Protocols for the use by ROSE & CMISE
(MS ISO/IEC ISP 11183-1), 25
- Enhanced management communication
(MS ISO/IEC ISP 11183-2), 25
- Basic management communication
(MS ISO/IEC ISP 11183-3), 25
- FVT211,FVT212-Application control objects
(MS ISO/IEC ISP 11185-1), 25
- FVT213,FVT214-Terminal control objects
(MS ISO/IEC ISP 11185-2), 26
- FVT215,FVT216-Application RIO record loading
control object, terminal RIO record notification
control objects (MS ISO/IEC ISP 11185-3), 26
- FVT217-Horizontal tabulation control object
(MS ISO/IEC ISP 11185-4), 26
- FVT218-Logical image control object
(MS ISO/IEC ISP 11185-5), 26
- FVT219-Status message control object
(MS ISO/IEC ISP 11185-6), 26
- FVT2110-Entry-control control object
(MS ISO/IEC ISP 11185-7), 26
- FVT2113-Field definition management control object
(MS ISO/IEC ISP 11185-15), 27
- FVT2115-Held text control object
(MS ISO/IEC ISP 11185-17), 27
- FVT2114-Terminal signal titles control object
(MS ISO/IEC ISP 11185-16), 27
- FVT2111-Waiting time control object
(MS ISO/IEC ISP 11185-13), 27
- FVT2119-Generalized telnet subnegotiation control
(MS ISO/IEC ISP11185-12), 26, 51
- FVT2112-Printer control object
(MS ISO/IEC ISP 11185-14),27
- FVT221-Forms FEICO (MS ISO/IEC ISP 11185-8), 26
- FVT222-Paged FEICO (MS ISO/IEC ISP 11185-9), 26
- FVT231-Forms FEICO (MS ISO/IEC ISP 11185-10), 26
- FVT232-Paged FEICO (MS ISO/IEC ISP 11185-11), 26
P
Packaging, Code of practice
- Bar code and 2-dimensional symbols
- Shipping, transport and receiving label
(MS ISO 15394), 15
Paper
- Carbonless or NCR (MS 1190), 63
Paper sizes (MS 10), 52
Pen - Ball-point & refills (MS 854), 52
Pencils (MS 1159), 52
Index
70
Subject - MS Number - Page Subject - MS Number - Page
Radio-frequency
- Equipment (MS CISPR 11), 5
Radio interference characteristics
- Sound & television broadcast (MS CISPR 13), 5
- Passive filters and suppression components
(MS CISPR 17), 3
- Overhead power lines and high-voltage equipment
- Description of phenomena (MS CISPR 18-1), 3
- Methods of measurement and procedure for
determining limits (MS CISPR 18-2), 3
- Code of practice for minimizing the generation of
radio noise (MS CISPR 18-3), 3
Radio immunity characteristics
- Sound & television broadcast (MS CISPR 20), 7
Reception - Sound & television, Code of Practice (MS 839), 9
Resistance calculation - Of plain & tinned copper conductors
(MS 798), 9
Rubber
- Erasers (MS 1163), 52
S
SI system
- Units, Representation, With limited character sets
(MS 1134), 11
Software development & system documentation
- Specification for a data descriptive file
(MS ISO/IEC 821), 19
Surge protective devices, low-voltage power distribution
- Gas discharge tubes (GDT) (MS IEC 61643-311), 2
- Avalanche breakdown diode (ABD)
(MS IEC 61643-321), 2
Switchgear
- Symbols
- Data processing flow charts (MS 1140), 10
T
Telecommunications
- Limits for industrial, scientific and medical equipment
(MS CISPR 23), 2
Transport layer
- Transport test management protocol specification
(MS ISO/IEC 10025-3), 30
Transport information and control systems
- Adaptive cruise control systems-performance
(MS ISO 15622), 51
- Forward vehicle collision warning system
(MS ISO 15623), 51
- Requirements for an ITS/TICS (MS ISO 14817), 59
Typewriter ribbon
- Cotton (MS 793), 52
- Nylon (MS 792), 52
U
Uninterruptible power system (UPS)
- EMC requirements (MS IEC 62040-2), 5
V
VSB parallel sub system bus of the IEC 821 VMEbus
ORDER FORM
The Malaysian Standards listed in this catalogue can be purchased from SIRIM Berhad, Technical Information
and Intellectual Property Services Department and can be ordered by mail, fax or e-mail.
For ordering purposes, please use the order form below.
Name : ____________________________________________
Company Name : _________________________________________
Address & Tel / Fax / E-mail : ________________________________
________________________________________________________
Malaysian Standards Number (MS No.) Unit Price* Quantity Cost (RM)
TOTAL
Postage & Handling Charges ( 10% of total or RM5.00 whichever is more )
GRAND TOTAL
* For oversea order, please contact SIRIM Berhad for prices.
Enclosed is a cheque no. ___________________ dated __________________ amounting
RM ____________ for the above order. ( Cheque is to be made payable to SIRIM Berhad )
____________________________ ___________________
Signed & Company Stamp Date
Send to : SIRIM Berhad, Technical Information & Intellectual Property Services Department,
1, Persiaran Dato’ Menteri, Section 2, 40000 Shah Alam, MALAYSIA
Tel : ++6 03 - 5544 6118 / 6105 / 6112; Fax : ++ 6 03 - 5544 6114 / 5544 6146
E-mail : [email protected]
Attention : Manager