5.0 metric iec standard motors iec techinical... · 2017-10-09 · american metric® corporation 65...

American Metric® Corporation 65

INDUSTRIAL MOTORS

5.0 METRIC IEC STANDARD MOTORS

Three-Phase Aluminum Frame

Single Phase Motors

Brake Motors

Slip Ring Motors Squirrel Cage with Air/Air Exchanger

Flame Proof Motors

Increased Safety Motors

Drip Proof Motors

Ametric® Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.

66 American Metric® Corporation

INDUSTRIAL MOTORS

5.1 OUTPUT RANGEThe present catalog deals with TEFC, three-phase, squirrelcage induction motors (Series BF) with shaft heights from 71up to 400 mm, in the following ranges:

0.37 up to 500 kW - 3000 rpm0.185 up to 500 kW - 1500 rpm0.12 up to 400 kW - 1000 rpm0.09 up to 315 kW - 750 rpm

For either higher output and larger size motors and/or otherspeeds or voltages, please contact our Special ProductsDepartment.

5.2 STANDARDS•DIMENSIONAL STANDARDSThe main dimensions of our BF series TEFC motors areaccording to IEC 72-1 (1991) that refers:

- the dimensions of foot-mounted motors,- the dimensions of mounting flanges,- the shaft extension dimensions,- the preferred output values.

•INTERCHANGEABILITY STANDARDSBF series TEFC motors are in accordance with CENELECharmonization document HD 231 and also with most nationalinterchangeability standards.

•QUALITY STANDARDSThe rating and performance of BF series TEFC motors meetthe standards laid down in IEC 34-1 (1983). Their perfor-mances are also in accordance with most national standardsspecifically VDE 0530, NBN C 51-101, NF C 51-111. Ifrequired, the performances of BF motors may be changed andthereby adapted to special requirements or other nationalstandards.

5.3 GENERAL CHARACTERISTICSThe characteristics listed below are the standard ones. Ifrequested, others may be available.

•MECHANICAL PROTECTIONThe standard degree of mechanical protection for motors,series BF4, is IP 54 and for motors, series BF5 and BF6, isIP 55 according to IEC 34-5 (1991).

•VOLTAGE AND FREQUENCYMOTORS WITH FRAME SIZE UP TO 160

These motors are wound to work at either 50 Hz or 60 Hz, in thefollowing voltage ranges:

For any voltage value in these ranges, a variation of -5% to+6% is allowed according to the majority of the standards.The electrical characteristics detailed in this catalog apply tothe standard voltages/frequencies shown above. Strictlyspeaking, these values will vary slightly with actual voltageand frequency, but the variations will generally remain withinthe tolerances given in IEC 34-1 (1983).

MOTORS WITH FRAME SIZES 180 AND ABOVEThese motors are wound for operation only at one of theabove-mentioned voltages and frequencies.

•INSULATIONAll the models referred to in this catalog are class F insulated.

•TEMPERATURE RISEAlthough the maximum temperature rise allowed for class Finsulation will be 105 K, in general, the temperature rise of BFmotors is below 80 K measured by resistance variationaccording to IEC 34-1 (1983).

•NOISE LEVELBF series TEFC motors meet IEC 34-9 (1990) concerningnoise limits.

•DYNAMIC BALANCINGBF series TEFC motors are dynamically balanced with a halfkey according to IEC 34-14 (1982).

5.4 CONSTRUCTION•CASINGIn sizes up to 160 the stator frame, the IM 1001 drive-endendshield, the non-drive and endshield, and the terminal boxare high-pressure die-cast in aluminum alloy. However, theendshields have integral cast iron liners forming the bearinghousings. Flange endshields are in cast iron. In sizes 180 upto 225, the stator frame and the terminal box are low pressuredie-cast also in aluminum alloy, the endshields being in castiron. In sizes 250 and above, all of these parts are in cast iron.

TOTALLY ENCLOSED FAN-COOLEDTHREE-PHASE, SQUIRREL-CAGE MOTORSLOW VOLTAGE

} For outputs up to3 kW/3.6 kW

For the remaining outputs

..... 220-240/250-280 V 50/60 HzY 380-415/440-480 V 50/60 Hz

..... 380-415/440-480 V 50/60 Hz



INDUSTRIAL MOTORS

•EARTH CONNECTIONAll motors are equipped with an earth screw or an earth barinside the terminal box. Earth bars are used on size 250 andabove. All motors size 112 and above have a second earthscrew or earth bar on one foot or on the flange as the case maybe.

•BEARINGS AND LUBRICATIONThe motors of series BF5 are equipped on both sides withdeep groove ball bearings greased for life and pre-loaded byan axial spring washer. The motors of series BF4 are equip-ped with a roller bearing on one side and a deep groove ballbearing on the other side. Grease nipples and grease valvesare provided on both sides. The motors of series BF6 areequipped on both sides with deep groove ball bearings andpre-loaded by an axial spring washer. Grease nipples andgrease valves are provided on both sides.

The standard drive end bearing will be replaced by a rollerone when belt transmission is used or by an angular contactbearing when the mounting form is vertical. The bearingtypes for the motors referred to in this catalog are as follows:

In IP55 motors the following V-Ring joints are used:

•FAN AND FAN COVERUp to shaft height 160, the motors are equipped with a poly-propylene fan, radially protected by a cover in aluminum alloythat is an integral part of the endshield, and axially protectedby a polypropylene grid.

Motors of shaft height 180 and above are equipped with fansthat can be made from polypropylene, aluminum alloy orwelded construction. The fan covers are in stamped steel orwelded constructed.

•SQUIRREL CAGEThe squirrel cages are in die-cast aluminum, the casting beingby high-pressure or by centrifugation. However, the cages ofthe motors BF6 400, or 1000 and 750 rpm, are formed bycopper bars brazed to copper end-rings using mediumfrequency technology.

•TERMINAL BOXOn motors up to size 225 the terminal box is an integral partof the frame. Motors, sizes 250 and above, have a conven-tional terminal box that can rotate 180°. As standard in thisrange the terminal box entries are on the right side of themotor viewed from shaft end. By rotating the terminal box,these entries can be transferred to the left side. Below are thestandard terminal arrangements and terminal box entries.

BF5 71BF5 80BF5 90BF5 100BF5 112BF5 132BF5 160BF5 180BF5 200BF5 225BF4 250BF4 280BF4 280BF4 315BF4 315BF6 315BF6 315BF6 355BF6 355BF6 400BF6 400

AllAllAllAllAllAllAllAllAllAllAll

3000Other3000Other3000Other3000Other3000Other

6202 2Z C36204 2Z C36205 2Z C36206 2Z C36206 2Z C36208 2Z C36209 2Z C36210 2Z C36212 2Z C36213 2Z C3

NU 3146314 C3NU 3166314 C3NU 3176219 C36220 C36219 C36222 C36219 C36224 C3

6202 2Z C36202 2Z C36204 2Z C36205 2Z C36205 2Z C36208 2Z C36209 2Z C36210 2Z C36212 2Z C36212 2Z C3

6314 C3NU 3146314 C3NU 3166314 C36219 C36219 C36219 C36219 C36219 C36219 C3

MotorType

Speed(rpm) Drive End Non-Drive End

Bearing Reference

BF5 71BF5 80BF5 90BF5 100BF5 112BF5 132BF5 160BF5 180BF5 200BF5 225BF6 315BF6 315BF6 355BF6 355BF6 400BF6 400

AllAllAllAllAllAllAllAllAllAll

3000Other3000Other3000Other

V-14 AV-18 AV-25 AV-30 AV-30 AV-40 AV-45 AV-50 AV-60 AV-65 AV-95 AV-100 AV-95 AV-110 AV-95 AV-120 A

MotorType

Speed(rpm) Drive End Non-Drive End

V-Ring Reference

V-14 AV-14 AV-18 AV-25 AV-25 AV-40 AV-45 AV-50 AV-60 AV-60 AV-95 AV-95 AV-95 AV-95 AV-95 AV-95 A

Quantities and Sizes

Terminals Terminal Box EntriesMotor Types

BF5 71 up to BF5 90BF5 100 and BF5 112BF5 132BF5 160BF5 180BF5 200 and BF5 225BF4 250 and BF4 280BF4 315BF6 315 up to BF6 400

6 x M46 x M46 x M66 x M66 x M86 x M86 x M106 x M106 x M12

2 x ø 22.5 (1)4 x ø 28.5 (2)4 x ø 28.5 (2)4 x ø 37 (2)4 x ø 37 (2)4 x ø 47 (2)2 x Pg 42 (3)2 x Pg 48 (3)2 x Pg 48 (3)

(1) One entry on each side(2) Two entries on each side(3) Two entries on the right side that can be transferred to the left side



INDUSTRIAL MOTORS5.5 TECHNICAL DATA

• NOMENCLATURE KEY

•OUTPUT DERATING CONDITIONSThe outputs presented in the tables concern normal workingconditions according to IEC 34-1 (1983). Environmental andelectrical site conditions (altitude, atmosphere temperature,form and symmetry of voltage, and voltage variation duringthe operation) must be maintained within certain limits inorder to get the nominal output from the motor. If these limitsare not respected, then a reduction of output will occur asstated below:

VoltageThese motors can supply this nominal output only if thevoltage variation is less than 5%. If a greater deviationoccurs, then the output must be reduced to avoid dangerousoverheating. The figures below should be observed:

Ambient TemperatureThese motors can supply their nominal output if the atmo-sphere temperature is no more than 40°C. If a higher atmo-sphere temperature is expected, then the output must bereduced to avoid dangerous overheating. The figures belowshould be observed:

AltitudeThese motors were designed to operate at an altitude notexceeding 1000 m above sea level. If site conditions exceedthis altitude, the following output reduction must be made:

•DIRECTION OF ROTATIONThe motors up to a shaft height of 355 are equipped with a bi-directional fan so that they can turn in both directions. Motorsof shaft height 400 are equipped with directional fans. Therequired direction of rotation of these motors must be speci-fied in the order.

•DRAIN HOLESThe motors up to shaft height 160 are not provided with drainholes. All the remaining motors have drain holes whoselocation depends on the mounting form of the motor.

•NORMAL MOUNTINGSThe normal mounting positions are the following, identified inIEC 34-7 code II:

BF 5 160 M 4 2

Number of Poles

Code for Length of Core

IEC Code for Length of Frame

IEC Shaft Height (mm)

Design Number

Code for TEFC Motors

Altitude AboveSea Level

(m)

Output Reduction forAtmosphere Temperature of

1000200030004000

40°C0%6%

12%18%

25°C0%0%0%6%

Voltage Deviation Output Reduction

± 5%± 7.5%± 10%

0%5%

10%

Ambient Temperature Output Reduction

40°C45°C50°C55°C60°C

0%5%

10%15%20%

IM 1001 IM 3001

IM 3601 IM 2001

IM 2101 IM 3011

IM 3611 IM 1011

Motor with feet down. One shaftend.

Motor without feet. One shaftend. Drive end flange mountingwith free fixing holes. Horizon-tally mounted (available up totype BF4 315).

Motor without feet. One shaftend. Drive end flange mountingwith threaded fixing holes. Hori-zontally mounted (available up totype 112).

Motor with feet down. One shaftend. Drive end flange mountingwith free fixing holes. Horizon-tally mounted.

Motor with feet down. One shaftend. Drive end flange mountingwith threaded fixing holes. Hori-zontally mounted.

As IM 3001, but vertically moun-ted with shaft end down.

As IM 3601, but verticallymounted with shaft end down.

Motor with feet. Vertically moun-ted with shaft end down.



INDUSTRIAL MOTORS

Ametric® Motor Part Number Breakdown

Ametric® Motors are generally:1. AC2. Three Phase3. IEC Standard4. Class F5. Totally Enclosed Fan Cooled6. 50Hz/60Hz7. NOT Premium Effeciency Rated

2 Pole = 3600rpm@60Hz with nominal load (3000rpm@50Hz)4 Pole = 1800rpm@60Hz with nominal load (1500rpm@50Hz)6 Pole = 1200rpm@60Hz with nominal load (1000rpm@50Hz)8 Pole = 900rpm@60Hz with nominal load (750 rpm@50Hz)

Please see the catalog for further details!

B F 5 7 1 M 4 4 G . 3 7

Three Phase Frame Length KW RatingAC Motor Size Thru Core @ 50Hz

Small, Mediumand Large

50Hz = “European”60Hz = “American”

BFF5 = Brake Motor

7200 / # of Poles = RPM

NotUsed

Numberof Poles

Type ofMount

B14 = Small FlangeG = B5 = Large Flange

P = Foot Mount



60Hz* 3600RPM 2 Pole250-280 or 440-480V

50Hz* 3000RPM 2 Pole220-240V or 380-415V

footfoot

footfoot

footfootfoot

footfoot

footfoot

foot

foot

footfootfoot

footfootfoot

foot

footfoot

foot

foot

footfoot

footfoot

footfoot

footfootfootfoot

footfootfoot

0.090.13

0.180.25

0.250.370.55

0.751.1

1.52.2

3

4

5.57.59

1115

18.5

22

3037

45

55

7590

110132

160200

250280315355

400450500

0.120.17

0.250.34

0.340.500.74

1.011.47

2.012.95

4.02

5.36

7.3710.0512.06

14.7520.1124.80

29.49

40.2149.60

60.32

73.73

100.54120.64

147.45176.94

214.48268.10

335.12375.34422.25475.87

536.19603.22670.24

––

3.94.3

5.85.85.8

9.09.0

1214

20

24

394554

657083

120

149185

195

445

455500

735805

1,0151,160

1,3251,4501,6501,820

2,3002,5002,700

BF7 56M22 P 0.09BF7 56M42 P 0.13

BF7 63M22 P 0.18BF7 63M42 P 0.25

BF5 71M42 P 0.25BF5 71M42 P 0.37BF5 71M42 P 0.55

BF5 80M42 P 0.75BF5 80M42 P 1.1

BF5 90S22 P 1.5BF5 90L42 P 2.2

BF5 100L42 P 3

BF5 112M22 P 4

BF5 132S42 P 5.5BF5 132S62 P 7.5BF5 132S62FS P 9

BF5 160M22 P 11BF5 160M42 P 15BF5 160L62 P 18.5

BF5 180M42 P 22

BF5 200L62 P 30BF5 200L82 P 37

BF5 225M42 P 45

BF4 250M42 P 55

BF4 280SA42 P 75BF4 280MA62 P 90

BF4 315SA42 P 110BF4 315MA62 P 132

BF6 315L22 P 160BF6 315L42 P 200

BF6 355M02 P 250BF6 355M22 P 280BF6 355M42 P 315BF6 355L62 P 355

BF6 400L02 P 400BF6 400L22 P 450BF6 400L42 P 500

BF7 56M22 G 0.09BF7 56M42 G 0.09

BF7 63M22 P 0.18BF7 63M42 P 0.25

BF5 71M42 G 0.25BF5 71M42 G 0.37BF5 71M42 G 0.55

BF5 80M42 G 0.75BF5 80M42 G 1.1

BF5 90S22 G 1.5BF5 90L42 G 2.2

BF5 100L42 G 3

BF5 112M22 G 4

BF5 132S42 G 5.5BF5 132S62 G 7.5BF5 132S62FS G 9

BF5 160M22 G 11BF5 160M42 G 15BF5 160L62 G 18.5

BF5 180M42 G 22

BF5 200L62 G 30BF5 200L82 G 37

BF5 225M42 G 45

BF4 250M42 G 55

BF4 280SA42 G 75BF4 280MA62 G 90

BF4 315SA42 G 110BF4 315MA62 G 132

BF6 315L22 G 160BF6 315L42 G 200

BF6 355M02 G 250BF6 355M22 G 280BF6 355M42 G 315BF6 355L62 G 355

BF6 400L02 G 400BF6 400L22 G 450BF6 400L42 G 500

flangeflange

flangeflange

flangeflangeflange

flangeflange

flangeflange

flange

flange

flangeflangeflange

flangeflangeflange

flange

flangeflange

flange

flange

flangeflange

flangeflange

flangeflange

flangeflangeflangeflange

flangeflangeflange

0.090.13

0.180.25

0.250.370.55

0.751.1

1.52.2

3

4

5.57.59

1115

18.5

22

3037

45

55

7590

110132

160200

250280315355

400450500

0.120.17

0.250.34

0.340.500.74

1.011.47

2.012.95

4.02

5.36

7.3710.0512.06

14.7520.1124.80

29.49

40.2149.60

60.32

73.73

100.54120.64

147.45176.94

214.48268.10

335.12375.34422.25475.87

536.19603.22670.24

––

3.94.3

5.85.85.8

9.09.0

1214

20

24

394554

657083

120

149185

195

445

455500

735805

1,0151,160

1,3251,4501,6501,820

2,3002,5002,700

STANDARD MOTOR METRIC IEC STANDARD

* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount



60Hz* 1800RPM 4 Pole250-280 or 440-480V

50Hz*

BF7 56M44 P 0.09

BF7 63M24 P 0.12BF7 63M44 P 0.18

BF5 71M44 P 0.18BF5 71M44 P 0.25BF5 71M44 P 0.37

BF5 80M44 P 0.55BF5 80M44 P 0.75

BF5 90S24 P 1.1BF5 90L44 P 1.5

BF5 100L24 P 2.2BF5 100L44 P 3

BF5 112M44 P 4

BF5 132S44 P 5.5BF5 132M84 P 7.5BF5 132M84FS P 9

BF5 160M44 P 11BF5 160L64 P 15

BF5 180M44 P 18.5BF5 180L64 P 22

BF5 200L64 P 30

BF5 225S24 P 37BF5 225M44 P 45

BF4 250M44 P 55

BF4 280SA44 P 75BF4 280MA84 P 90

BF4 315SA44 P 110BF4 315MA64 P 132

BF6 315L24 P 160BF6 315L44 P 200

BF6 355M04 P 250BF6 355M24 P 280BF6 355M44 P 315BF6 355L64 P 355

BF6 400L24 P 400BF6 400L44 P 450BF6 400L64 P 500

foot

footfoot

footfootfoot

footfoot

footfoot

footfoot

foot

footfootfoot

footfoot

footfoot

foot

footfoot

foot

footfoot

footfoot

footfoot

footfootfootfoot

footfootfoot

BF7 56M44 G 0.09

BF7 63M24 P 0.12BF7 63M44 P 0.18

BF5 71M44 G 0.18BF5 71M44 G 0.25BF5 71M44 G 0.37

BF5 80M44 G 0.55BF5 80M44 G 0.75

BF5 90S24 G 1.1BF5 90L44 G 1.5

BF5 100L24 G 2.2BF5 100L44 G 3

BF5 112M44 G 4

BF5 132S44 G 5.5BF5 132M84 G 7.5BF5 132M84FS G 9

BF5 160M44 G 11BF5 160L64 G 15

BF5 180M44 G 18.5BF5 180L64 G 22

BF5 200L64 G 30

BF5 225S24 G 37BF5 225M44 G 45

BF4 250M44 G 55

BF4 280SA44 G 75BF4 280MA84 G 90

BF4 315SA44 G 110BF4 315MA64 G 132

BF6 315L24 G 160BF6 315L44 G 200

BF6 355M04 G 250BF6 355M24 G 280BF6 355M44 G 315BF6 355L64 G 355

BF6 400L24 G 400BF6 400L44 G 450BF6 400L64 G 500

0.09

0.120.18

0.180.250.37

0.550.75

1.11.5

2.23

4

5.57.59

1115

18.522

30

3745

55

7590

110132

160200

250280315355

400450500

0.12

0.160.25

0.240.340.50

0.741.01

1.472.01

2.954.02

5.36

7.3710.0512.06

14.7520.11

24.8029.49

40.21

49.6060.32

73.73

100.54120.64

147.45176.94

214.48268.10

335.12375.34422.25475.87

536.19603.22670.24

–

3.94.3

5.85.85.8

8.58.5

11.513.5

1821

25

384554

6981

113125

160

183195

390

470550

750820

1,1501,275

1,4101,5201,6301,800

2,4002,6502,880

flange

flangeflange

flangeflangeflange

flangeflange

flangeflange

flangeflange

flange

flangeflangeflange

flangeflange

flangeflange

flange

flangeflange

flange

flangeflange

flangeflange

flangeflange


flangeflangeflange

0.09

0.120.18

0.180.250.37

0.550.75

1.11.5

2.23

4

5.57.59

1115

18.522

30

3745

55

7590

110132

160200

250280315355

400450500

0.12

0.160.25

0.240.340.50

0.741.01

1.472.01

2.954.02

5.36

7.3710.0512.06

14.7520.11

24.8029.49

40.21

49.6060.32

73.73

100.54120.64

147.45176.94

214.48268.10

335.12375.34422.25475.87

536.19603.22670.24

–

3.94.3

5.85.85.8

8.58.5

11.513.5

1821

25

384554

6981

113125

160

183195

390

470550

750820

1,1501,275

1,4101,5201,6301,800

2,4002,6502,880

1500RPM 4 Pole220-240V or 380-415V



PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount



60Hz* 1200RPM 6 Pole250-280 or 440-480V

50Hz* 1000RPM 6 Pole220-240V or 380-415V

BF7 56M46 P 0.06

BF5 71M46 P 0.12BF5 71M46 P 0.185BF5 71M46 P 0.25

BF5 80M46 P 0.37BF5 80M66 P 0.55

BF5 90S26 P 0.75BF5 90L66 P 1.1

BF5 100L46 P 1.5

BF5 112M46 P 2.2

BF5 132S86 P 3BF5 132M86 P 4BF5 132M86 P 5.5

BF5 160M66 P 7.5BF5 160L66 P 11

BF5 180L46 P 15

BF5 200L26 P 18.5BF5 200L46 P 22

BF5 225M46 P 30

BF4 250M26 P 37

BF4 280SA26 P 45BF4 280MA46 P 55

BF4 315SA46 P 75BF4 315MA66 P 90

BF6 315L26 P 110BF6 315L46 P 132BF6 315L66 P 160

BF6 355M06 P 200BF6 355M26 P 250BF6 355L46 P 280

BF6 400L26 P 315BF6 400L46 P 355BF6 400L66 P 400

–

5.85.85.8

8.59.0

11.515

21

25

444449

7577

123

125140

180

370

450490

680770

1,0501,1001,200

1,5251,7501,940

2,0202,2302,500

BF5 71M46 G 0.12BF5 71M46 G 0.185BF5 71M46 G 0.25

BF5 80M46 G 0.37BF5 80M66 G 0.55

BF5 90S26 G 0.75BF5 90L66 G 1.1

BF5 100L46 G 1.5

BF5 112M46 G 2.2

BF5 132S86 G 3BF5 132M86 G 4BF5 132M86 G 5.5

BF5 160M66 G 7.5BF5 160L66 G 11

BF5 180L46 G 15

BF5 200L26 G 18.5BF5 200L46 G 22

BF5 225M46 G 30

BF4 250M26 G 37

BF4 280SA26 G 45BF4 280MA46 G 55

BF4 315SA46 G 75BF4 315MA66 G 90

BF6 315L26 G 110BF6 315L46 G 132BF6 315L66 G 160

BF6 355M06 G 200BF6 355M26 G 250BF6 355L46 G 280

BF6 400L26 G 315BF6 400L46 G 355BF6 400L66 G 400

0.06

0.120.1850.25

0.370.55

0.751.1

1.5

2.2

34

5.5

7.511

15

18.522

30

37

4555

7590

110132160

200250280

315355400

0.08

0.160.250.34

0.500.74

1.011.47

2.01

2.95

4.025.367.37

10.0514.75

20.11

24.8029.49

40.21

49.60

60.3273.73

100.54120.64

147.45176.94214.48

268.10335.12375.34

422.25475.87536.19

foot

footfootfoot

footfoot

footfoot

foot

foot

footfootfoot

footfoot

foot

footfoot

foot

foot

footfoot

footfoot

footfootfoot

footfootfoot

footfootfoot

5.85.85.8

8.59.0

11.515

21

25

444449

7577

123

125140

180

370

450490

680770

1,0501,1001,200

1,5251,7501,940

2,0202,2302,500

0.120.1850.25

0.370.55

0.751.1

1.5

2.2

34

5.5

7.511

15

18.522

30

37

4555

7590

110132160

200250280

315355400

0.160.250.34

0.500.74

1.011.47

2.01

2.95

4.025.367.37

10.0514.75

20.11

24.8029.49

40.21

49.60

60.3273.73

100.54120.64

147.45176.94214.48

268.10335.12375.34

422.25475.87536.19

flangeflangeflange

flangeflange

flangeflange

flange

flange

flangeflangeflange

flangeflange

flange

flangeflange

flange

flange

flangeflange

flangeflange

flangeflangeflange

flangeflangeflange

flangeflangeflange



PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount





PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

BF5 71M48 P 0.09BF5 71M48 P 0.12

BF5 80M48 P 0.185BF5 80M68 P 0.25

BF5 90S28 P 0.37BF5 90L68 P 0.55

BF5 100L48 P 0.75BF5 100L48 P 1.1

BF5 112M48 P 1.5

BF5 132S88 P 2.2BF5 132M88 P 3

BF5 160M68 P 4BF5 160M68 P 5.5BF5 160L68 P 7.5

BF5 180L48 P 11

BF5 200L48 P 15

BF5 225S28 P 18.5BF5 225M48 P 22

BF4 250M48 P 30

BF4 280SA48 P 37BF4 280MA68 P 45

BF4 315SA48 P 55BF4 315MA68 P 75

BF6 315L28 P 90BF6 315L48 P 110BF6 315L68 P 132

BF6 355M08 P 160BF6 355M28 P 200BF6 355L48 P 250

BF6 400L68 P 280BF6 400L88 P 315

0.090.12

0.1850.25

0.370.55

0.751.1

1.5

2.23

45.57.5

11

15

18.522

30

3745

5575

90110132

160200250

280315

0.120.16

0.250.34

0.500.74

1.011.47

2.01

2.954.02

5.367.37

10.05

14.75

20.11

24.8029.49

40.21

49.6060.32

73.73100.54

120.64147.45176.94

214.48268.10335.12

375.34422.25

5.85.8

8.59.0

11.515

2121

25

4444

808081

115

140

170180

395

500555

700790

9601,0751,225

1,3601,6001,950

2,4502,650

60Hz* 900RPM 8 Pole250-280 or 440-480V

50Hz* 750RPM 8 Pole220-240V or 380-415V

footfoot

footfoot

footfoot

footfoot

foot

footfoot

footfootfoot

foot

foot

footfoot

foot

footfoot

footfoot

footfootfoot

footfootfoot

footfoot

BF5 71M48 G 0.09BF5 71M48 G 0.12

BF5 80M48 G 0.185BF5 80M68 G 0.25

BF5 90S28 G 0.37BF5 90L68 G 0.55

BF5 100L48 G 0.75BF5 100L48 G 1.1

BF5 112M48 G 1.5

BF5 132S88 G 2.2BF5 132M88 G 3

BF5 160M68 G 4BF5 160M68 G 5.5BF5 160L68 G 7.5

BF5 180L48 G 11

BF5 200L48 G 15

BF5 225S28 G 18.5BF5 225M48 G 22

BF4 250M48 G 30

BF4 280SA48 G 37BF4 280MA68 G 45

BF4 315SA48 G 55BF4 315MA68 G 75

BF6 315L28 G 90BF6 315L48 G 110BF6 315L68 G 132

BF6 355M08 G 160BF6 355M28 G 200BF6 355L48 G 250

BF6 400L68 G 280BF6 400L88 G 315

0.090.12

0.1850.25

0.370.55

0.751.1

1.5

2.23

45.57.5

11

15

18.522

30

3745

5575

90110132

160200250

280315

0.120.16

0.250.34

0.500.74

1.011.47

2.01

2.954.02

5.367.37

10.05

14.75

20.11

24.8029.49

40.21

49.6060.32

73.73100.54

120.64147.45176.94

214.48268.10335.12

375.34422.25

5.85.8

8.59.0

11.515

2121

25

4444

808081

115

140

170180

395

500555

700790

9601,0751,225

1,3601,6001,950

2,4502,650

flangeflange

flangeflange

flangeflange

flangeflange

flange

flangeflange

flangeflangeflange

flange

flange

flangeflange

flange

flangeflange

flangeflange

flangeflangeflange

flangeflangeflange

flangeflange



FOOT MOUNTED MOTORSIM FORM 1001; 1002; 1051; 1052; 1061; 1062; 1071; 1072; 1011; 1012; 1031; 1032

MOTORTYPE

BF7 63M

BF7 71M

BF5 80M

BF5 90SBF5 90L

BF5 100L

BF5 112M

BF5 132SBF5 132M

BF5 160MBF5 160L

100

112

125

140140

160

190

216216

254254

—

25

27.5

3030

35

40

5252

6060

—

132

150

171171

195

220

260260

300300

122

140

157

180180

200

211

257257

292292

80

90

100

100125

140

140

140178

210251

—

110

120

127152

175

175

218218

300300

40

45

50

5656

63

70

8989

106108

63

71

80

9090

100

112

132132

160160

8

8

9.5

1010

12

12

1616

1818

164.5

177

192.5

210210

235.5

257.5

295295

356356

52

63

68.5

78.578.5

90.5

88

103103

120120

11

7

10

1010

12

12

1212

14.514.5

203

227

265

283308

350

382.5

478478

606606

—

1 x 22.5

1 x 22.5

1 x 22.51 x 22.5

1 x 28.5

2 x 28.5

2 x 28.52 x 28.5

2 x 372 x 37

—

Pg 16

Pg 16

Pg 16Pg 16

Pg 21

Pg 21

Pg 21Pg 21

Pg 29Pg 29

11

14

19

2424

28

28

3838

4242

23

30

40

5050

60

60

8080

110110

4

5

6

88

8

8

1010

1212

9

11

15.5

2020

24

24

3333

3737

12.5

16

21.5

2727

31

31

4141

4545

M5 x 10

M5 x 10

M6 x 16

M8 x 19M8 x 19

M10 x 22

M10 x 22

M12 x 28M12 x 28

M16 x 36M16 x 36

CableGland

Holeø

a51 SHAFT EXTENSIONS

D E F G GA XA AA AB AC B BB C H HA HD h11 K L

BF7 63 UP TO 160 MOTORS

DIMENSIONS (MM)

B3

THREE-PHASE, SQUIRREL-CAGE MOTORS



THREE-PHASE, SQUIRREL-CAGE MOTORS

FLANGE MOUNTED MOTORSFREE-GOING FIXING HOLES

IM FORM 3001; 3002; 3011; 3012; 3031; 3032THREADED FIXING HOLES

IM FORM 3601; 3602; 3611; 3612; 3631; 3632

MOTORTYPE

BF7 63M

BF7 71M

BF5 80M

BF5 90S

BF5 90L

BF5 100L

BF5 112M

BF5 132S - M

BF5 160M - L

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -36 - -

30 - -

F115F75

F130F 85

F165F100

F165F115

F165F115

F215F130

F215F130

F265F165

F300

11575

13085

165100

165115

165115

215130

215130

265165

300

9560

11070

13080

13095

13095

180110

180110

230130

250

14090

160105

200120

200140

200140

250160

250160

300195

350

8—

8—

8—

10—

10—

12—

12—

12—

13

2.5—

3.52.5

3.53

3.53

3.53

43.5

43.5

43.5

5

90°90°

45°45°

45°45°

45°45°

45°45°

45°45°

45°45°

45°45°

45°

9.5M5

10M6

12M6

12M8

12M8

14.5M8

14.5M8

14.5M10

18.5

122122

140140

157157

180180

180180

200200

211211

257257

292

5252

6363

68.568.5

78.578.5

78.578.5

90.590.5

8888

103103

120

9292

106106

112.5112.5

120120

120120

135.5135.5

145.5145.5

163163

196

203203

227227

265265

283283

308308

350350

382.5382.5

478478

606

——

22.522.5

22.522.5

22.522.5

22.522.5

28.528.5

28.528.5

28.528.5

37

——

Pg 16Pg 16

Pg 16Pg 16

Pg 16Pg 16

Pg 16Pg 16

Pg 21Pg 21

Pg 21Pg 21

Pg 21Pg 21

Pg 29

1111

1414

1919

2424

2424

2828

2828

3838

42

2323

3030

4040

5050

5050

6060

6060

8080

110

44

55

66

88

88

88

88

1010

12

99

1111

15.515.5

2020

2020

2424

2424

3333

37

12.512.5

1616

21.521.5

2727

2727

3131

3131

4141

45

M5 x 10M5 x 10

M5 x 10M5 x 10

M6 x 16M6 x 16

M8 x 19M8 x 19

M8 x 19M8 x 19

M10 x 22M10 x 22

M10 x 22M10 x 22

M12 x 28M12 x 28

M16 x 36

CableGland

Holeø

a51SHAFT EXTENSIONS

D E F G GA XIM

Form IEC M N P LA T S AC h11 h12 L

FLANGE DIMENSIONS MAIN DIMENSIONS

α

* ISO tolerances: 14 i 6 (+0,008); 19, 24, 28 j 6 (+0.009); 38, 42 k 6 (+0.018)–0.003 +0.002–0.004

BF7 63 UP TO 160 MOTORS

B5 B14



BF5 180M (1)BF5 180M (2)BF5 180L (2)BF5 200L (1)BF5 200L (2)BF5 225S (2)BF5 225M (1)BF5 225M (2)

BF5 180M (1)BF5 180M e L (2)BF5 200L (1)BF5 200L (2)BF5 225S e M (2)BF5 225M (1)

TOTALLY ENCLOSED FAN-COOLED THREE-PHASE MOTORS



BF4 250M (1)BF4 250M (2)BF4 280SA (1)BF4 280SA (2)BF4 280MA (1)BF4 280MA (2)BF4 315SA (1)BF4 315SA (2)BF4 315MA (1)BF4 315MA (2)

(1) 2 poles(2) 4 poles and more

(1) 2 poles(2) 4 poles and more

BF4 250M (1)BF4 250M (2)BF4 280SA (1)BF4 280SA (2)BF4 280MA (1)BF4 280MA (2)BF4 315SA (1)BF4 315SA (2)BF4 315MA (1)BF4 315MA (2)




BF3 315MA (1)BF3 315M (2) (3)BF3 355MA (1)BF3 280SA (2)BF3 400LA (1)BF3 400LA (2)

(1) 2 poles: direct coupling(2) 4 poles and more: direct coupling(2) 4 poles and more: belt drive

BF3 315MA (1)BF3 315MA (2) (3)BF3 355MA (1)BF3 355MA (2)BF3 400LA (1)BF3 400LA (2)




1500RPM 4 Pole220-240V or 380-415V

50Hz* 3000RPM 2 Pole220-240V or 380-415V

3600RPM 2 Pole250-280 or 440-480V

60Hz*

50Hz*

1800RPM 4 Pole250-280 or 440-480V

60Hz*

BFF5 71M42BFF5 71M42BFF5 71M42BFF5 71M42


BFF5 90S22BFF5 90L42BFF5 90S22BFF5 90L42

BFF5 100L42BFF5 100L42

BFF5 112M22BFF5 112M22

BFF5 132S42BFF5 132S62BFF5 132S42BFF5 132S62

BFF5 160M22BFF5 160M42BFF5 160L62BFF5 160M22BFF5 160M42BFF5 160L62

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

0.370.550.370.55

0.751.1

0.751.1

1.52.21.52.2

33

44

5.57.55.57.5

1115

18.51115

18.5

0.500.740.500.74

1.011.471.011.47

2.012.952.012.95

4.024.02

5.365.36

7.3710.057.37

10.05

14.7520.1124.8014.7520.1124.80

BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44



BFF5 100L24BFF5 100L44BFF5 100L24BFF5 100L44

BFF5 112M44BFF5 112M44

BFF5 132S44BFF5 132M84BFF5 132S44BFF5 132M84

BFF5 160M44BFF5 160L64BFF5 160M44BFF5 160L64

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.180.250.370.180.250.37

0.550.750.550.75

1.11.51.11.5

2.23

2.23

44

5.57.55.57.5

11151115

0.240.340.500.240.340.50

0.741.010.741.01

1.472.011.472.01

2.954.022.954.02

5.365.36

7.3710.057.37

10.05

14.7520.1114.7520.11

DISC BRAKE MOTOR METRIC IEC STANDARD


PartNumber HPkW

TypeMount

PartNumber HPkW

TypeMount



DISC BRAKE MOTOR METRIC IEC STANDARD


PartNumber HPkW

TypeMount

PartNumber HPkW

TypeMount

50Hz* 1000RPM 6 Pole220-240V or 380-415V

1200RPM 6 Pole250-280 or 440-480V

60Hz*

50Hz* 750RPM 8 Pole220-240V or 380-415V

900RPM 8 Pole250-280 or 440-480V

60Hz*

BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46



BFF5 100L46BFF5 100L46

BFF5 112M46BFF5 112M46

BFF5 132S86BFF5 132M86BFF5 132M86BFF5 132S86BFF5 132M86BFF5 132M86

BFF5 160M66BFF5 160L66BFF5 160M66BFF5 160L66




BFF5 100L48BFF5 100L48BFF5 100L48BFF5 100L48

BFF5 112M48BFF5 112M48

BFF5 132S88BFF5 132M88BFF5 132S88BFF5 132M88

BFF5 160M68BFF5 160M68BFF5 160L68BFF5 160M68BFF5 160M68BFF5 160L68

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

0.120.1850.250.12

0.1850.25

0.370.550.370.55

0.751.1

0.751.1

1.51.5

2.22.2

34

5.534

5.5

7.5117.511

0.090.120.090.12

0.1850.25

0.1850.25

0.370.550.370.55

0.751.10.751.1

1.51.5

2.23

2.23

45.57.54

5.57.5

0.160.250.340.160.250.34

0.500.740.500.74

1.011.471.011.47

2.012.01

2.952.95

4.025.367.374.025.367.37

10.0514.7510.0514.75

0.120.160.120.16

0.250.340.250.34

0.500.740.500.74

1.011.471.011.47

2.012.01

2.954.022.954.02

5.367.37

10.055.367.37

10.05



DISC BRAKE MOTOR

FOOT-MOUNTED MOTORSIM1001; 1051; 1061; 1071; 1011; 1031

Dimensions (mm)

Bore Air-GapA AA AB AC B BB C H HA HD h11 K L D E F G GA XShaft End a51Type

BFF5 71MBFF5 80MBFF5 90SBFF5 90LBFF5 100L

112125140140160

2527.5303035

132150171171195

140157180180204

90100100125140

110120127152175

4550565663

71809090100

89.5101012

177192.5210210

235.5

6368.578.578.590.5

710101012

271304330355403

1419242428

3040505060

56888

1115.5202024

1621.5272731

M4x10M6x16M8x19M8x19

M10x22

22.522.522.522.528.5

0.20.20.20.20.2

FLANGE-MOUNTED MOTORSDimensions (mm)

Bore Air-GapIM IEC M N P LA T S AC h11 h12 L D E F G GA XShaft End a51Type

BFF5 71M

BFF5 80M

BFF5 90S

BFF5 90L

BFF5 100L

30363036303630363036

F130F85F165F100F165F115F165F115F215F130

13085165100165115165115215130

11070130801309513095180110

160105200120200140200140250160

8--8--10--10--12--

3.52.53.53

3.53

3.534

3.5

45o

45o

45o

45o

45o

45o

45o

45o

45o

45o

10M612M612M812M814.5M8

140140157157180180180180204204

6363

68.568.578.578.578.578.590.590.5

106106

112.5112.5120120120120

135.5135.5

271271304304330330355355403403

14141919242424242828

30304040505050506060

5566888888

1111

15.515.5202020202424

1616

21.521.5272727273131

M14x0M4x10M6x16M6x16M8x19M8x19M8x19Mx19

M10x22M10x22

22.522.522.522.522.522.522.522.528.528.5

0.20.20.20.20.20.20.20.20.20.2

FREE HOLESIM 3001; 2011; 3031

THREADED HOLESIM 3601; 3611; 3631



DISC BRAKE MOTOR

FOOT-MOUNTED MOTORSIM1001; 1051; 1061; 1071; 1011; 1031

Dimensions (mm)

Bore Air-GapA AA AB AC B BB C H HA HD h11 K L D E F G GA XShaft End a51Type

BFF5 112MBFF5 132SBFF5 132MBFF5 160MBFF5 160L

190216216254254

4052526060

220260260300300

218254254303303

140140178210254

175218218300300

708989108108

112132132160160

1216161818

257.5295295356356

88103103120120

1212121515

493569569711711

2838384242

608080110110

810101212

2433333737

3141414545

M10x22M12x28M12x28M16x36M16x36

2x28.52x28.52x28.52x372x37

0.40.50.50.50.5

FLANGE-MOUNTED MOTORSDimensions (mm)

Bore Air-GapIM IEC M N P LA T S AC h11 h12 L D E F G GA X

Shaft End a51Type

BFF5 112M

BFF5 132S/M

BFF5 160M/L

3036303630

F215F130F265F165F300

215130265165300

180110230130250

250160300195350

12--12--13

43.54

3.55

45o

45o

45o

45o

45o

14.5M814.5M1018.5

218218254254303

8888103103120

145.5145.5163163196

493493569569711

2828383842

60608080110

88

101012

2424333337

3131414145

M10x22M10x22M12x28M12x28M16x36

2x28.52x28.52x28.52x28.52x37

0.20.20.20.20.2

FREE HOLESIM 3001; 2011; 3031

THREADED HOLESIM 3601; 3611; 3631



60Hz* 3600RPM 2 Pole250-280 or 440-480V

50Hz* 3000RPM 2 Pole220-240V or 380-415V

footfootfootfootfoot

foot

foot

footfoot

footfootfoot

foot

footfoot

foot

foot

footfoot

footfoot

footfoot

footfootfootfoot

footfootfoot

0.550.751.101.502.20

3.00

4.00

5.507.50

11.0015.0018.50

22.00

30.0037.00

45.00

55.00

75.0090.00

110.00132.00

160.00200.00

220.00260.00290.00330.00

370.00400.00440.00

0.741.011.472.012.95

4.02

5.36

7.3710.05

14.7520.1124.80

29.49

40.2149.60

60.32

73.73

100.54120.64

147.45176.94

214.48268.10

294.91348.53388.74442.36

495.98536.19589.81

3030303040

50

65

8590

120135160

205

275290

350

450

575620

810890

11501250

1550180018751950

265028002900

BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 L52

BFGC3 100 L22A

BFGC3 112 M22

BFGC3 132 S22BFGC3 132 S42

BFGC3 160 M22BFGC3 160 M42BFGC3 160 L62

BFGC3 180 M42

BFGC3 200 L22BFGC3 200 L42

BFGC4 225 M42

BFGC4 250 M42

BFGC4 280 SA42BFGC4 280 MA62


BFGC3 315 MA62BFGC3 315 MA82

BFGC3 355 MA22BFGC3 355 MA42BFGC3 355 MA62BFGC3 355 MA82

BFGC3 400 LA42BFGC3 400 LA62BFGC3 400 LA82

flangeflangeflangeflangeflange

flange

flange

flangeflange

flangeflangeflange

flange

flangeflange

flange

flange

flangeflange

flangeflange

flangeflange


flangeflangeflange

0.550.751.101.502.20

3.00

4.00

5.507.50

11.0015.0018.50

22.00

30.0037.00

45.00

55.00

75.0090.00

110.00132.00

160.00200.00

220.00260.00290.00330.00

370.00400.00440.00

0.741.011.472.012.95

4.02

5.36

7.3710.05

14.7520.1124.80

29.49

40.2149.60

60.32

73.73

100.54120.64

147.45176.94

214.48268.10

294.91348.53388.74442.36

495.98536.19589.81

3030303040

50

65

8590

120135160

205

275290

350

450

575620

810890

11501250

1550180018751950

265028002900

BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 L52

BFGC3 100 L22A

BFGC3 112 M22

BFGC3 132 S22BFGC3 132 S42


BFGC3 180 M42

BFGC3 200 L22BFGC3 200 L42

BFGC4 225 M42

BFGC4 250 M42





BFGC3 400 LA42BFGC3 400 LA62BFGC3 400 LA82

EXPLOSION PROOF MOTOR METRIC IEC STANDARD


Flame-Proof StandardsAll Ametric® BFGC Motors satisfy EN 50014, 50018 European standards for the IIC group of gases in the T4 temperature range. They arefitted with EEx d IIC flameproof terminal boxes.

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount






PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

60Hz* 1800RPM 4 Pole250-280 or 440-480V

50Hz* 1500RPM 4 Pole220-240V or 380-415V

BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 L44A

BFGC3 100 L34ABFGC3 100 L54A

BFGC3 112 M44

BFGC3 132 S44BFGC3 132 M44

BFGC3 160 M44BFGC3 160 L64

BFGC3 180 M44BFGC3 180 L64

BFGC3 200 L44

BFGC3 225 S24BFGC3 225 M44

BFGC4 250 M44





BFGC3 400 LA24BFGC3 400 LA44BFGC3 400 LA64BFGC3 400 LA84

footfootfootfootfoot

footfoot

foot

footfoot

footfoot

footfoot

foot

footfoot

foot

footfoot

footfoot

footfoot

footfootfootfoot

footfootfootfoot

0.370.550.751.101.50

2.203.00

4.00

5.507.50

11.0015.00

18.5022.00

30.00

37.0045.00

55.00

75.0090.00

110.00132.00

160.00200.00

220.00260.00290.00315.00

330.00370.00400.00440.00

3030303035

4550

60

8585

140160

210230

290

315340

465

600650

815895

12501350

1950207522002250

2770250030253200

0.500.741.011.472.01

2.954.02

5.36

7.3710.05

14.7520.11

24.8029.49

40.21

49.6060.32

73.73

100.54120.64

147.45176.94

214.48268.10

294.91348.53388.74422.25

442.36495.98536.19589.81

BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 L44A


BFGC3 112 M44

BFGC3 132 S44BFGC3 132 M44

BFGC3 160 M44BFGC3 160 L64

BFGC3 180 M44BFGC3 180 L64

BFGC3 200 L44

BFGC3 225 S24BFGC3 225 M44

BFGC4 250 M44





BFGC3 400 LA24BFGC3 400 LA44BFGC3 400 LA64BFGC3 400 LA84

flangeflangeflangeflangeflange

flangeflange

flange

flangeflange

flangeflange

flangeflange

flange

flangeflange

flange

flangeflange

flangeflange

flangeflange



0.370.550.751.101.50

2.203.00

4.00

5.507.50

11.0015.00

18.5022.00

30.00

37.0045.00

55.00

75.0090.00

110.00132.00

160.00200.00

220.00260.00290.00315.00

330.00370.00400.00440.00

3030303035

4550

60

8585

140160

210230

290

315340

465

600650

815895

12501350

1950207522002250

2770250030253200

0.500.741.011.472.01

2.954.02

5.36

7.3710.05

14.7520.11

24.8029.49

40.21

49.6060.32

73.73

100.54120.64

147.45176.94

214.48268.10

294.91348.53388.74422.25

442.36495.98536.19589.81






PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

60Hz* 1200RPM 6 Pole250-280 or 440-480V

50Hz* 1000RPM 6 Pole220-240V or 380-415V

BFGC3 90 S36ABFGC3 90 S36ABFGC3 90 S36ABFGC3 90 L66

BFGC3 100 L16A

BFGC3 112 M46

BFGC3 132 S26BFGC3 132 M46BFGC3 132 M86

BFGC3 160 M40BFGC3 160 L86

BFGC3 180 L46

BFGC3 200 L26BFGC3 200 L46

BFGC4 225 M46

BFGC4 250 M26



BFGC3 315 MA66BFGC3 315 MA86BFGC3 315 MA106


BFGC3 400 LA66BFGC3 400 LA86

30303045

50

60

8090110

140165

200

260310

390

450

610650

740836

112512251350

20252150

30253175

0.370.550.751.10

1.50

2.20

3.004.005.50

7.5011.00

15.00

18.5022.00

30.00

37.00

45.0055.00

75.0090.00

110.00132.00160.00

200.00250.00

290.00330.00

0.500.741.011.47

2.01

2.95

4.025.367.37

10.0514.75

20.11

24.8029.49

40.21

49.60

60.3273.73

100.54120.64

147.45176.94214.48

268.10335.12

388.74442.36

footfootfootfoot

foot

foot

footfootfoot

footfoot

foot

footfoot

foot

foot

footfoot

footfoot

footfootfoot

footfoot

footfoot

BFGC3 90 S36ABFGC3 90 S36ABFGC3 90 S36ABFGC3 90 L66

BFGC3 100 L16A

BFGC3 112 M46

BFGC3 132 S26BFGC3 132 M46BFGC3 132 M86

BFGC3 160 M40BFGC3 160 L86

BFGC3 180 L46

BFGC3 200 L26BFGC3 200 L46

BFGC4 225 M46

BFGC4 250 M26






30303045

50

60

8090110

140165

200

260310

390

450

610650

740836

112512251350

20252150

30253175

0.370.550.751.10

1.50

2.20

3.004.005.50

7.5011.00

15.00

18.5022.00

30.00

37.00

45.0055.00

75.0090.00

110.00132.00160.00

200.00250.00

290.00330.00

0.500.741.011.47

2.01

2.95

4.025.367.37

10.0514.75

20.11

24.8029.49

40.21

49.60

60.3273.73

100.54120.64

147.45176.94214.48

268.10335.12

388.74442.36


flange

flange

flangeflangeflange

flangeflange

flange

flangeflange

flange

flange

flangeflange

flangeflange

flangeflangeflange

flangeflange

flangeflange






PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

BFGC3 90 S48BFGC3 90 L68


BFGC3 112 M48

BFGC3 132 S28BFGC3 132 M42


BFGC3 180 L48

BFGC3 200 L28

BFGC3 225 S28BFGC3 225 M48

BFGC4 250 M48






0.370.55

0.751.10

1.50

2.203.00

4.005.507.50

11.00

15.00

18.5022.00

30.00

37.0045.00

55.0075.00

100.00110.00132.00

150.00185.00220.00

260.00290.00

0.500.74

1.011.47

2.01

2.954.02

5.367.37

10.05

14.75

20.11

24.8029.49

40.21

49.6060.32

73.73100.54

134.05147.45176.94

201.07247.99294.91

348.53388.74

4045

5055

60

8092

135140165

200

260

350400

450

610630

740830

117512501300

200022002400

30003200

60Hz* 900RPM 8 Pole250-280 or 440-480V

50Hz* 750RPM 8 Pole220-240V or 380-415V

footfoot

footfoot

foot

footfoot

footfootfoot

foot

foot

footfoot

foot

footfoot

footfoot

footfootfoot

footfootfoot

footfoot

BFGC3 90 S48BFGC3 90 L68


BFGC3 112 M48

BFGC3 132 S28BFGC3 132 M42


BFGC3 180 L48

BFGC3 200 L28

BFGC3 225 S28BFGC3 225 M48

BFGC4 250 M48






0.370.55

0.751.10

1.50

2.203.00

4.005.507.50

11.00

15.00

18.5022.00

30.00

37.0045.00

55.0075.00

100.00110.00132.00

150.00185.00220.00

260.00290.00

0.500.74

1.011.47

2.01

2.954.02

5.367.37

10.05

14.75

20.11

24.8029.49

40.21

49.6060.32

73.73100.54

134.05147.45176.94

201.07247.99294.91

348.53388.74

4045

5055

60

8092

135140165

200

260

350400

450

610630

740830

117512501300

200022002400

30003200

flangeflange

flangeflange

flange

flangeflange

flangeflangeflange

flange

flange

flangeflange

flange

flangeflange

flangeflange

flangeflangeflange

flangeflangeflange

flangeflange



FOOT-MOUNTED MOTORS - IM 1001 Layout

FLAME-PROOF TYPE THREE-PHASE MOTORS

SHORT-CIRCUIT ROTORLOW VOLTAGEBFGC3 90 to 225 and BFGC4 250 to 315A Motors



FLAME-PROOF TYPE (BFGC3 315A to 400A Motors)

FOOT-MOUNTED MOTORS - IM 1001 Layout

FLANGE-MOUNTED MOTORS - IM 3001 Layout



FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.37/0.250.45/0.30.37/0.250.45/0.3

0.6/0.450.85/0.650.6/0.450.85/0.65

1.3/12/1.61.3/12/1.6

2.7/2.23.4/2.72.7/2.23.4/2.7

4.5/3.34.5/3.3

5.7/4.67.6/6.35.7/4.67.6/6.3

12.5/8.515/11

12.5/8.515/11

0.5/0.340.6/0.40.5/0.340.6/0.4

0.8/0.61.1/0.90.8/0.61.1/0.9

1.7/1.42.7/2.11.7/1.42.7/2.1

3.6/34.5/3.63.6/3

4.5/3.6

6/4.56/4.5

7.6/6.110.1/8.47.6/6.110.1/8.4

17/11.520/15

17/11.520/15

50Hz* 3000/1500 RPM 2/4 Pole220-240V or 380-415V

3600/1800 RPM 2/4 Pole250-280 or 440-480V

60Hz*

BF5 180M424BF5 180L624BF5 180M424BF5 180L624

BF5 200L824BF5 200L824

BF5 225M424BF5 225M424

BF4 250M424BF4 250M424

BF4 280SA424BF4 280MA624BF4 280SA424BF4 280MA624


FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

18.5/12.522/15

18.5/12.522/15

30/2030/20

33/2233/22

45/3045/30

55/3775/4555/3775/45

92/55110/6692/55110/66

25/1730/2025/1730/20

40/2740/27

45/3045/30

60/4060/40

75/50100/6075/50100/60

125/75150/90125/75150/90

BF5 71M424BF5 71M424BF5 71M424BF5 71M424

BF5 80M424BF5 80M624BF5 80M424BF5 80M624

BF5 90S224BF5 90L624BF5 90S224BF5 90L624

BF5 100L224BF5 100L424BF5 100L224BF5 100L424

BF5 112M424BF5 112M424

BF5 132S424BF5 132M824BF5 132S424BF5 132M824

BF5 160M424BF5 160L624BF5 160M424BF5 160L624

5.85.85.85.8

7.69

7.69

11.513.411.513.4

1820.518

20.5

2525

35453545

69816981

113125113125

175175

210210

445445

525580525580

734814734814

TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARDSTANDARD


PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount



TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARD


PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

BF5 71M448BF5 71M448

BF5 80M448BF5 80M448BF5 80M448BF5 80M448

BF5 90S248BF5 90L248BF5 90S248BF5 90L248

BF5 100L248BF5 100L448BF5 100L248BF5 100L448

BF5 112M448BF5 112M448BF5 112M448BF5 112M448

BF5 132M848BF5 132M848BF5 132M848BF5 132M848BF5 132M848BF5 132M848

BF5 160M648BF5 160L648BF5 160M648BF5 160L648

BF5 180M448BF5 180M448

BF5 200L448BF5 200L448

BF5 225S248BF5 225M448BF5 225S248BF5 225M448

BF4 250M448BF4 250M448

BF4 280SA448BF4 280MA648BF4 280MA848BF4 280SA448BF4 280SA648BF4 280MA848

BF4 315SA648BF4 315MA648BF4 315MA848BF4 315SA648BF4 315MA648BF4 315MA848

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

15/9.515/9.5

20/1120/11

24/1830/2224/1830/22

37/2637/26

45/3055/3766/4545/3055/3766/45

81/5593/66110/8181/5593/66110/81

0.3/0.160.3/0.16

0.5/0.260.8/0.370.5/0.260.8/0.37

0.9/0.51.5/1

0.9/0.51.5/1

2/13/1.42/1

3/1.4

3.6/24.5/2.33.6/2

4.5/2.3

5.5/2.76.9/3.77.6/4.55.5/2.76.9/3.77.6/4.5

11/616/9.511/6

16/9.5

20/1320/13

27/1527/15

33/2440/3033/2440/30

50/3550/35

60/4075/5090/6060/4075/5090/60

110/75126/90150/110110/75126/90150/110

50Hz* 1500/750 RPM 4/8 Pole220-240V or 380-415V

1800/900 RPM 4/8 Pole250-280 or 440-480V

60Hz*

0.22/0.120.22/0.12

0.4/0.20.6/0.280.4/0.20.6/0.28

0.7/0.371.1/0.750.7/0.371.1/0.75

1.5/0.752.2/1

1.5/0.752.2/1

2.7/1.53.3/1.72.7/1.53.3/1.7

4/25.2/2.85.7/3.4

4/25.2/2.85.7/3.4

8/4.512/78/4.512/7

5.85.8

9999

11.515

11.515

1820.518

20.5

25252525

474747474747

68816881

115115

140140

170180170180

445445

480555594480555594

705780820705780820





PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

50Hz* 1500/1000 RPM 4/6 Pole220-240V or 380-415V

1800/1200 RPM 4/6 Pole250-280 or 440-480V

60Hz*

BF5 71M446BF5 71M446

BF5 80M646BF5 80M646BF5 80M646BF5 80M646

BF5 90S446BF5 90L646BF5 90S446BF5 90L646

BF5 100L246BF5 100L446BF5 100L246BF5 100L446

BF5 112M446BF5 112M446BF5 112M446BF5 112M446

BF5 132M846BF5 132M846BF5 132M846BF5 132M846

BF5 160M446BF5 160L646BF5 160M446BF5 160L646

BF5 180M446BF5 180L646BF5 180M446BF5 180L646

BF5 200L446BF5 200L646BF5 200L446BF5 200L646

BF5 225M446BF5 225M446

BF4 250M446BF4 250M446



FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.25/0.150.25/0.15

0.35/0.30.5/0.370.35/0.30.5/0.37

0.8/0.451.2/0.650.8/0.451.2/0.65

1.5/0.91.8/1.11.5/0.91.8/1.1

2.4/1.852.8/2.052.4/1.852.8/2.05

3.9/2.655.4/3.53.9/2.655.4/3.5

7.5/5.511.5/8.57.5/5.511.5/8.5

13/815/1013/815/10

17/1223/1517/1223/15

30/2030/20

37/2237/22

45/2655/3066/4445/2655/3066/44

81/5595/6681/5595/66

0.34/0.20.34/0.2

0.5/0.40.7/0.50.5/0.40.7/0.5

1.1/0.61.6/0.91.1/0.61.6/0.9

2/1.22.5/1.52/1.2

2.5/1.5

3.2/2.53.7/2.73.2/2.53.7/2.7

5.2/3.57.2/4.65.2/3.57.2/4.6

10/7.515.3/11.5

10/7.515.3/11.5

18/1120/1418/1120/14

23/1631/2023/1631/20

40/2740/27

50/3050/30

60/3575/4090/6060/3575/4090/60

110/75130/90110/75130/90

5.85.8

9999

11.515

11.515

1820.518

20.5

23232323

47474747

69816981

113125113125

149149149149

200200

437437

480500594480500594

750820750820



50Hz* 1000/750 RPM 6/8 Pole220-240V or 380-415V

1200/900 RPM 6/8 Pole250-280 or 440-480V

60Hz*

BF5 71M468BF5 71M468

BF5 80M668BF5 80M668

BF5 90L668BF5 90L668

BF5 100L268BF5 100L468BF5 100L268BF5 100L468

BF5 112M468BF5 112M468BF5 112M468BF5 112M468

BF5 132S868BF5 132M868BF5 132S868BF5 132M868

BF5 160M468BF5 160L468BF5 160L668BF5 160M468BF5 160L468BF5 160L668

BF5 180L868BF5 180L868

BF5 200L668BF5 200L868BF5 200L668BF5 200L868

BF5 225M468BF5 225M468

BF4 250M468BF4 250M468

BF4 280M668BF4 280M868BF4 280M668BF4 280M868

BF4 315MA668BF4 315MA668

FOOTFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

0.12/0.050.12/0.05

0.25/0.120.25/0.12

0.37/0.250.37/0.25

0.55/0.370.75/0.550.55/0.370.75/0.55

1.1/0.751.5/0.881.1/0.751.5/0.88

2.65/1.953/2.2

2.65/1.953/2.2

4/36.2/4.48.4/5.7

4/36.2/4.48.4/5.7

13/9.513/9.5

16/1222/1616/1222/16

25/18.525/18.5

30/2230/22

42/3155/4542/3155/45

70/5570/55

0.16/0.070.16/0.07

0.34/0.160.34/0.16

0.5/0.340.5/0.34

0.75/0.51/0.75

0.75/0.51/0.75

1.5/12/1.21.5/12/1.2

3.5/2.64/3

3.5/2.64/3

5.5/48.3/611/7.65.5/48.3/611/7.6

18/1318/13

21/1630/2121/1630/21

34/2534/25

40/3040/30

56/4175/6056/4175/60

93/7593/75

5.85.8

99

1515

1820.518

20.5

25252525

35473547

69

8169

81

115115

125140125140

210210

405405

475490475490

790790



PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount



TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARD


PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.55/0.110.55/0.11

0.9/0.181.2/0.250.9/0.181.2/0.25

1.6/0.352.2/0.451.6/0.352.2/0.45

3.5/0.73.5/0.7

4.5/1.15.5/1.354.5/1.15.5/1.35

6.9/1.78.3/2.19/2.5

6.9/1.78.3/2.19/2.5

15/318/415/318/4

50Hz* 3000/1500 RPM 2/4 Pole220-240V or 380-415V

3600/1800 RPM 2/4 Pole250-280 or 440-480V

60Hz*

BF5 180M424BF5 180L424BF5 180M424BF5 180L424

BF5 200L624BF5 200L824BF5 200L624BF5 200L824

BF5 225M424BF5 225M424

BF4 250M424BF4 250M424



FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

20/424/4.820/4

24/4.8

27/5.532/6.527/5.532/6.5

37/737/7

45/8.845/8.8

55/1175/1555/1175/15

90/18.5110/2290/18.5110/22

27/5.533/6.527/5.533/6.5

37/7.543/8.837/7.543/8.8

50/9.550/9.5

60/1260/12

75/15100/2075/15100/20

122/25150/30122/25150/30

BF5 71M424BF5 71M424

BF5 80M424BF5 80M624BF5 80M424BF5 80M624

BF5 90S224BF5 90L424BF5 90S224BF5 90L424

BF5 100L424BF5 100L424

BF5 112M224BF5 112M424BF5 112M224BF5 112M424

BF5 132S624BF5 132S624BF5 132M824BF5 132S624BF5 132S624BF5 132M824

BF5 160M424BF5 160L624BF5 160M424BF5 160L624

5.85.8

9999

12141214

20.520.5

23

23

4242

4242

70827082

120

120

175

175

220220

445445

525580525580

734814734814

0.75/0.150.75/0.15

1.2/0.251.6/0.341.2/0.251.6/0.34

2.1/0.53/0.6

2.1/0.53/0.6

4.6/0.94.6/0.9

6/1.57.5/1.86/1.5

7.5/1.8

9.2/2.311/2.812/3.49.2/2.311/2.812/3.4

20/424/5.520/4

24/5.5



TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARDSTANDARD


PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

BF5 71M448BF5 71M448

BF5 80M448BF5 80M648BF5 80M448BF5 80M648

BF5 90S448BF5 90L648BF5 90S448BF5 90L648

BF5 100L248BF5 100L448BF5 100L248BF5 100L448

BF5 112M448BF5 112M448

BF5 132S848BF5 132M848BF5 132M848BF5 132S848BF5 132M848BF5 132M848

BF5 160M448BF5 160L648BF5 160M448BF5 160L648

BF5 180M448BF5 180L648BF5 180M448BF5 180L648

BF5 200L448BF5 200L448

BF5 225S248BF5 225M448BF5 225S248BF5 225M448

BF4 250M448BF4 250M448

BF4 280SA448BF4 280MA648BF4 280MA848BF4 280SA448BF4 280SA648BF4 280MA848


FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

17/3.420/4

17/3.420/4

26/526/5

36/742/8.536/7

42/8.5

40/8.840/8.8

47/1158/15

68/18.547/1158/15

68/18.5

85/2297/25115/3085/2297/25115/30

0.5/0.130.5/0.13

0.9/0.171.1/0.250.9/0.171.1/0.25

1.6/0.372.3/0.51.6/0.372.3/0.5

3/0.73.7/0.83/0.7

3.7/0.8

5/1.25/1.2

6.9/1.88.4/2.311/2.76.9/1.88.4/2.311/2.7

14/320/3.614/3

20/3.6

23/4.527/5.523/4.527/5.5

35/6.835/6.8

48/9.556/11.548/9.556/11.5

55/1255/12

64/1579/2092/2564/1579/2092/25

116/30132/34156/40116/30132/34156/40

50Hz* 1500/750 RPM 4/8 Pole220-240V or 380-415V

1800/900 RPM 4/8 Pole250-280 or 440-480V

60Hz*

0.4/0.10.4/0.1

0.65/0.130.85/0.180.65/0.130.85/0.18

1.2/0.281.7/0.351.2/0.281.7/0.35

2.3/0.52.8/0.62.3/0.52.8/0.6

3.7/0.923.7/0.92

5.2/1.356.3/1.78.4/2.055.2/1.356.3/1.78.4/2.05

10.5/2.215.5/2.710.5/2.215.5/2.7

5.85.8

9

9

15

15

18211821

2525

4545

4545

69816981

113125113125

200210200210

440440

480545595480545595

680775820680775820



TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARDSTANDARD


PartNumber

WeightkgHPkW

TypeMount

50Hz* 1500/1000 RPM 4/6 Pole220-240V or 380-415V

1800/1200 RPM 4/6 Pole250-280 or 440-480V

60Hz*

BF5 71M446BF5 71M446

BF5 80M646BF5 80M646BF5 80M646BF5 80M646

BF5 90S446BF5 90L646BF5 90S446BF5 90L646

BF5 100L246BF5 100L446BF5 100L246BF5 100L446

BF5 112M446BF5 112M446

BF5 132S846BF5 132M846BF5 132M846BF5 132S846BF5 132M846BF5 132M846

BF5 160M646BF5 160L646BF5 160M646BF5 160L646

BF5 180M446BF5 180L446BF5 180M446BF5 180L446

BF5 200L446BF5 200L646BF5 200L446BF5 200L646

BF5 225M246BF5 225M246

BF4 250M446BF4 250M446



FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.3/0.10.3/0.1

0.5/0.150.65/0.220.5/0.150.65/0.22

1.1/0.321.6/0.51.1/0.321.6/0.5

2/0.62.4/0.75

2/0.62.4/0.75

3.45/1.13.45/1.1

4.6/1.356.2/1.87.2/2.14.6/1.356.2/1.87.2/2.1

10/3.314.5/4.510/3.3

14.5/4.5

16/520/6.516/5

20/6.5

22.7/7.527/9

22.7/7.527/9

34/1234/12

42/1542/15

50/18.566/22

50/18.566/22

80/3095/3780/3095/37

0.4/0.130.4/0.13

0.7/0.20.9/0.30.7/0.20.9/0.3

1.5/0.42.1/0.71.5/0.42.1/0.7

2.7/0.83.2/1

2.7/0.83.2/1

4.6/1.54.6/1.5

6.1/1.88.3/2.59.6/2.86.1/1.88.3/2.59.6/2.8

14/4.519/6

14/4.519/6

21/6.827/8.821/6.827/8.8

30/1037/1230/1037/12

45/1645/16

56/2056/20

67/2590/3067/2590/30

110/40130/50110/40130/50

5.85.8

9999

15

15

1820.518

20.5

2525

4545

4545

81

81

113

113

149

149

445445

510595510595

750820750820

PartNumber

WeightkgHPkW

TypeMount



TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARD


PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

50Hz* 1000/750 RPM 6/8 Pole220-240V or 380-415V

1200/900 RPM 6/8 Pole250-280 or 440-480V

60Hz*

BF5 71M468BF5 71M468

BF5 80M668BF5 80M668BF5 80M668BF5 80M668

BF5 90S468BF5 90L668BF5 90S468BF5 90L668

BF5 100L268BF5 100L468BF5 100L268BF5 100L468

BF5 112M468BF5 112M468

BF5 132S868BF5 132M868BF5 132S868BF5 132M868

BF5 160M468BF5 160M468BF5 160L668BF5 160M468BF5 160M468BF5 160L668

BF5 180L468BF5 180L668BF5 180L468BF5 180L668

BF5 200L668BF5 200L868BF5 200L668BF5 200L868

BF5 225M468BF5 225M468

BF4 250M468BF4 250M468



FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.12/0.050.12/0.05

0.25/0.080.3/0.1

0.25/0.080.3/0.1

0.45/0.180.6/0.240.45/0.180.6/0.24

1.1/0.51.4/0.61.1/0.51.4/0.6

1.8/0.751.8/0.75

2.5/1.13.3/1.42.5/1.13.3/1.4

4/25/2.57.1/34/2

5/2.57.1/3

10/514/6.210/5

14/6.2

17/824/11.5

17/824/11.5

28/1328/13

33/1733/17

37/18.545/2258/27

37/18.545/2258/27

75/3382/3675/3382/36

0.16/0.070.16/0.07

0.34/0.10.4/0.130.34/0.10.4/0.13

0.6/0.250.8/0.330.6/0.250.8/0.33

1.5/0.71.9/0.81.5/0.71.9/0.8

2.5/12.5/1

3.4/1.54.5/1.93.4/1.54.5/1.9

5.5/2.76.8/3.49.5/4

5.5/2.76.8/3.49.5/4

14/6.819/8.314/6.819/8.3

23/1133/15.323/11

33/15.3

37/1837/18

45/2345/23

50/2560/3079/3750/2560/3079/37

100/45109/48100/45109/48

5.85.8

9999

15

15

1820.518

20.5

2525

47

47

696981696981

115

115

205205

405405

470

470

790

790



SINGLE PHASE TEFC CAPACITOR RUN METRIC IEC STANDARD

50Hz 3000RPM 2 Pole110V or 220V

3600RPM 2 Pole115V or 230V

60Hz



60Hz



60Hz

BF5C 71M42BF5C 71M42BF5C 71M42BF5C 71M62BF5C 71M42BF5C 71M42BF5C 71M42BF5C 71M62

BF5C 80M42BF5C 80M42

BF5C 90S22BF5C 90L42BF5C 90S22BF5C 90L42

BF5C 100L42BF5C 100L42

BF5C 112M42BF5C 112M42

FOOTFOOTFOOTFOOT

FLANGEFLANGEFLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

0.180.250.370.550.180.250.370.55

0.750.75

1.11.51.11.5

2.22.2

33

0.240.340.500.740.240.340.500.74

1.011.01

1.472.011.472.01

2.952.95

4.024.02

BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44

BF5C 80M44BF5C 80M64BF5C 80M44BF5C 80M64

BF5C 90L44BF5C 90L64BF5C 90L44BF5C 90L64

BF5C 100L44BF5C 100L44

BF5C 112M44BF5C 112M44

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

0.180.250.370.180.250.37

0.550.750.550.75

1.11.51.11.5

2.22.2

33

0.240.340.500.240.340.50

0.741.010.741.01

1.472.011.472.01

2.952.95

4.024.02

5.95.95.96.35.95.95.96.3

9.29.2

12.314.012.314.0

20.520.5

17.517.5

6.06.06.06.06.06.0

8.69.48.69.4

13.615.313.615.3

21.521.5

25.525.5

BF5C 71M46BF5C 71M46

BF5C 80M46BF5C 80M66BF5C 80M66BF5C 80M46BF5C 80M66BF5C 80M66

BF5C 90L66BF5C 90L66

BF5C 100L46BF5C 100L46

BF5C 112M46BF5C 112M46

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFLANGE

FOOTFLANGE

FOOTFLANGE

0.120.12

0.180.250.370.180.250.37

0.550.55

0.750.75

1.11.1

0.160.16

0.240.340.500.240.340.50

0.740.74

1.011.01

1.471.47

6.06.0

8.59.29.28.59.29.2

15.015.0

20.520.5

25.525.5

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount


MT Type Single Phase Motors with a run capacitor permanetly turned on and connected to the axillary winding for starting


SINGLE PHASE TEFC CAPACITOR START/RUN METRIC IEC STANDARD



60Hz

50Hz

60Hz

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount



BF5D 71M42BF5D 71M62BF5D 71M42BF5D 71M62


BF5D 90L42BF5D 90L62BF5D 90L42BF5D 90L62

BF5D 100L42BF5D 100L42

PPGG

PPGG

PPGG

PG

0.500.740.500.74

1.011.471.011.47

2.012.952.012.95

4.024.02

5.96.35.96.3

9.89.89.89.8

15.515.515.515.5

22.022.0

0.370.550.370.55

0.751.1

0.751.1

1.52.21.52.2

33



BF5D 90L44BF5D 90L64BF5D 90L44BF5D 90L64

BF5D 100L44BF5D 100L44

PPGG

PPGG

PPGG

PG

0.340.500.340.50

0.741.010.741.01

1.472.011.472.01

2.952.95

5.95.95.95.9

10.010.010.010.0

16.516.516.516.5

23.023.0

0.250.370.250.37

0.550.750.550.75

1.11.51.11.5

2.22.2


XN-XF Type Single Phase Motors where a high starting torque is required. Can be equipped with an auxiliary capacitor which is connected only in the starting phase.




SINGLE PHASE TEFC CAPACITOR START METRIC IEC STANDARD

BF5M 71M42BF5M 71M42BF5M 71M62BF5M 71M42BF5M 71M42BF5M 71M62

BF5M 80M42BF5M 80M42

BF5M 90S22BF5M 90L42BF5M 90L62BF5M 90S22BF5M 90L42BF5M 90L62

BF5M 100L42BF5M 100L42

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFLANGE

FOOTFOOTFOOT

FLANGEFLANGEFLANGE

FOOTFLANGE

0.240.340.500.240.340.50

0.740.74

1.011.472.011.011.472.01

2.952.95



60Hz

50Hz

60Hz

BF5M 71M44BF5M 71M44BF5M 71M44BF5M 71M44

BF5M 80M44BF5M 80M44

BF5M 90S24BF5M 90L64BF5M 90S24BF5M 90L64

BF5M 100L44BF5M 100L44BF5M 100L44BF5M 100L44

FOOTFOOT

FLANGEFLANGE

FOOTFLANGE

FOOTFOOT

FLANGEFLANGE

FOOTFOOT

FLANGEFLANGE

0.180.250.180.25

0.370.37

0.550.750.550.75

1.11.51.11.5

5.95.96.35.95.96.3

9.89.8

12.514.515.512.514.515.5

21.021.0

6.06.06.06.0

9.09.0

12.215.512.215.5

22.022.022.022.0

0.180.250.370.180.250.37

0.550.55

0.751.11.50.751.11.5

2.22.2

0.240.340.240.34

0.500.50

0.741.010.741.01

1.472.011.472.01

PartNumber

WeightkgHPkW

TypeMount

PartNumber

WeightkgHPkW

TypeMount


XN-XF Type Single Phase Motors where a high starting torque is required. Can be equipped with an auxiliary capacitor which is connected only in the starting phase.


TEFC SINGLE-PHASE MOTORS


5.0 metric iec standard motors iec techinical... · 2017-10-09 · american metric® corporation 65...

Documents