5.00 section 5 cover 151117 5 - cryeng seb.pdf · high-flow natural draft vaporizers, designed for...
TRANSCRIPT
CRYOGENIC PRODUCTS
ModelOverall Length
SEB 1RSEB 2RSEB 3RSEB 4RSEB 6RSEB 8RSEB 10RSEB 12R
Inch2424324048648096
mm61061081010201220162520302440
DISTRIBUTED BY:5.03
SEB Series Trim HeaterCryoquip manufactures a new series of modular Trim Heaters. The new units are available for use with industrial gases such as Oxygen, Nitrogen, Argon, CO2 as well as other specialized gases.
Improved features include:• Removable and replaceable heater elements• Low pressure drop• Small footprint• Lightweight and portable
Electric Cryogen Trim Heater utilize high quality electric heating elements and stainless steel heat exchanger tubes. Heating elements and tubes are specially positioned in the highly conductive aluminum modules. Modules consist of multiple stainless steel tubes in parallel to provide low pressure drops. The electric trim heaters are made optionally for high purity applications which include electropolished tubing.
System Features• Solid state temperature controller.• Independent solid state auto resetting high-temperature switch controller.• A separate manual/auto resetting high limit shutdown controller. NEMA 4 electrical control
enclosure, door interlock handle.• Individual electrical components UL recognized. CSA certified, IEC approved and CE stamped.
Standard Options Available• Low temperature solenoid shut-off valve • NEMA 4x electrical control enclosure.• ANSI, Mueller four-bolt or DIN Flange end connections.
Design Data• Standard maximum working pressure 450 psig (30 barg) : working pressures to 10,000 psig
(690 barg) available.• Pressure drops are based on 100 psig (6.9 barg) inlet
Units available in multiple voltages (575V, 480V, 415V, 400V, 380V, 240V). Power requirements may vary slightly with each specific model. Consult factory for pricing and delivery.
Pressure Drop
Flow rate
SCFH/Nm³/hr5,000/13010,000/260
15,000,395
20,000/525
25,000/657
30,000/790
40,000/1050
Temp-rise
ºF / Cº125/70125/7063/35125/7084/4742/23125/7094/5263/35100/5575/4250/28125/70104/5884/4763/35125/7094/5263/35
2/0.1
SEB-2R-8T6-10-X
SEB 3R-12T6-15-X
SEB 5R-20T6-25-X
5/0.4SEB 1R-4T6-5-X
SEB 1 R-4T6-5-X
SEB 3R-12T6-15-X
SEB 2R-8T6-20-X
SEB 2R-8T6-10-X
SEB 3R-12T6-30-X
SEB 3R-12T6-30-X
SEB 4R-16T6-20-X
SEB 4R-16T6-40-X
SEB 4R-16T6-20-X
10/0.7
SEB 1R-4T6-10-XSEB 1 R-4T6-5-X
SEB 2R-8T6-20-XSEB 2R-8T6-10-X
SEB 2R-8T6-20-X
SEB 3R-12T6-30-X
SCFH/Nm³/hr80,000/2100
100,000/2630
60,000/1580
70,000/1840
50,000/1315
ºF / Cº125/7094/5263/357/26
125/70100/5563/3550/28125/70105/5863/3552/29140/78108/6072/4054/30125/70100/5563/3550/28
5/0/4SEB 8R 32T6 80 X
SEB 8R 32T6 40 X
SEB 10R 40T6 100 X
SEB 10R 40T6 50 XSEB 6R-24T6-60-X
SEB 6R-24T6-60-XSEB 8R-32T6-80-X
SEB 8R-32T6-40-X
SEB 5R-20T6-50-X
SEB 5R 20T6-25-X
10/0.7
SEB 6R 24T6 60X
SEB 6R 24T6 30 X
SEB 8R 32T6 80X
SEB-5R-20T6-50-X
SEB 5R-20T6-25-X
SEB 6R-24T6-60-X
SEB 6R-24T6-30-X
SEB-4R-16T6-40-X
SEB-4R-16T6-20-X
Psi/bar Psi/bar Psi/bar Flow rateTemp-rise
Psi/bar Psi/bar
*US Patent #5,251,452
DISTRIBUTED BY:5.04
CRYOGENIC PRODUCTS
UFV Uniflo® SeriesCryoquip’s UFV Uniflo® Series ambient air vaporizer is an entirely new, patented* concept in high-flow natural draft vaporizers, designed for ambient air vaporization of cryogenic fluids. The Uniflo® vaporizer had significant advantages over conventional designs for high flow service. The heat transfer elements are connected in parallel, which eliminates the differential thermal gradients between extrusions.Counter flow heat exchange between the downward flow of air in natural convection and the upward flow of the cryogenic in the vaporizer improves the thermal performance substantially compared to conventional designs with the same surface area.Ice accumulates safely during continuous operation in the lower part of the vaporizer with ice free extrusions protruding out of the ice pack. The low ice build-up lowers the center of gravity and therefore, reduces structural requirements in meeting the Uniform Building Code (UBC).
DescriptionThe UFV series feature Cryoquip’s patented Uniflo® configuration of all parallel flow offering the following advantages:• Even thermal gradients.• High-flow, low pressure drop design.• Unique internal aid fluid distribution• Ice forms safely at bottom of vaporizer.• Better approach exit temperatures from pure counter flow design.
Features• High thermal efficiency• Advanced integral design• Manufactured in the USA• Cleaned for oxygen service• Patented Spar Link© construction• Proven Cryoquip heat transfer design• Designed in accordance with the UBC and ASCE• Seismic zone 4,100+mph wind available• MAWP up to 580 psig (40 bar-g) standard• Flow rates up to 304,000 SCFH (8,000 Nm³/hr)
Model
UFV-856-XXL40UFV-864-XXL40
UFV-1264-XXL40UFV-1272-XXL40UFV-1280-XXL40UFV-1290-XXL40
Inch90989887101101
mm228624892489221025652565
Inch799090827887
mm200722862286208319812210
Inch525525525525525525
mm133351333513335133351333513335
Dimension A (Length) Dimension B (Width) Dimension C (Height)
UFV 856(XX)L40
UFV 864(XX) L40
UFV 1264(XX)L40
UFV 1272(XX)L40
UFV 1280(XX)L40
UFV 1290(XX)L40
11200
12800
19000
21300
23700
26700
1040
1250
1775
2000
2220
2500
116600
133200
190200
213100
235900
266300
3065
3500
5000
5600
6200
7000
108300
123700
140800
156000
175000
197900
2845
3250
3700
4100
4600
5200
99900
114200
127500
140800
156000
178800
2625
3000
3350
3700
4100
4700
85100
97100
108500
121800
133200
152200
2235
2550
2850
3200
3500
4000
76700
87500
97100
106600
121800
137000
2015
2300
2550
2800
3200
3600
70000
79900
87500
95200
106600
121800
1840
2100
2300
2500
2800
3200
Capacities
Modelft² m² SCFH Nm³/hr SCFH Nm³/hr SCFH Nm³/hr SCFH Nm³/hr SCFH Nm³/hr SCFH Nm³/hr
Surface Area 8 hr Capacity 12 hr Capacity 16 hr Capacity 24 hr Capacity 48 hr Capacity 72 hr Capacity
5.05
CRYOGENIC PRODUCTS
Wide Space Ambient Air Vaporizers SeriesNew, improved unitized construction yields the highest structural to cost ratio available, and precludes the use of welds that cannot be heat treated, thereby maintaining the greatest structural integrity.• Employs the unique Cryoquip “spar” link design; an efficient attachment method that
enhances load carrying capability, which maintains the highest level of structural integrity available in the industry, during all modes of transportations.
• Can be deployed or redeployed with ease since these units are capable of resting on a flat bed trailer without the need for added shipping pallets, support blocks, or other shipping pieces.
• Can be handled with a fork lift without the vaporizer sustaining damage.• Can be tied down on a trailer without any additional crating provisions.• Lifting eyes are provided to facilitate handling.• Designed in accordance with the Uniform Building Code (UBC) and applicable sections of
ANSI A 58.1. Units available for seismic zone 4, and 100 mph (160 km/h) conditions with normal frost loading.
• Continuous service rating is permitted for operating periods 5 to 7 days, or longer under certain conditions, with greater frost/ice loading for freeze periods.
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
YEW C
HEONG (A
SIAPA
C) PTE L
TD
VAI 804 FVAI 806 FL 10VAI 806 FL 12VAI 812 FVAI 812 FL 12VAI 812 FL 15VAI 816 FL 10VAI 820 FL 12VAI 824 FL 12VAI 830 FL 12VAI 836 FL 12VAI 836 FL 15VAI 836 FL 18VAI 836 FL 20VAI 848 FL 12VAI 848 FL 15VAI 848 FL 18VAI 848 FL 20VAI 856 FL 12VAI 856 FL 15VAI 856 FL 18VAI 864 FL 15VAI 864 FL 18VAI 864 FL 20VAI 872 FL 20VAI 872 FL 23
1503003604507209008001200144018802160270032403600280036004320480033604200504048005760640072008280
14283342678474112134167201251301334268334401446312390468446535595669769
884004404706507807001200135017502100250028003100250032003600400030003750480048005500620070007900
4025096817514301716410264061079595011351270140511351450163018151360170021752175249528101540017380
21x2131x2131x2143x3243x3243x3246x4658x4669x4658x6969x6969x6969x6969x6991x6991x6991x6991x6978x9178x9178x9191x9191x9191x91102x91102x91
650x650850x650787x533850x11501092x8131092x8131150x11501473x11681750x11501450x17501750x17501750x17501750x17501750x17502300x17502300x17502300x17502300x17502000x23002000x23002000x23002300x23002300x23002300x23002591x23112591x2311
1.53.04.04.27.810.08.012.014.519.523.029.536.040.531.039.548.054.037.047.557.054.066.073.585.0100.0
367910510820526321031538051560577594510658151040126514209751250150014201735193522342629
1.02.02.93.25.77.26.09.011.014.017.021.526.529.522.529.035.539.527.035.042.039.548.053.560.067.0
285376821491891582372903704455656957755907659351040710920110510401265140515771761
0.81.52.12.54.35.44.56.88.510.513.016.520.022.017.021.526.529.520.026.031.029.536.040.045.050.0
21395563113142118179225275340435525580445565695775535683820775945105011831314
0.71.31.72.13.4.43.55.67.08.510.513.516.018.014.018.021.524.017.022.026.024.029.032.537.041.0
1834455392116921471852252753554204753704755656304455706856307658559731078
ft² m² lbs kg inches mm 8-hours 1-day 3-days 5-7 day
ModelExternal HeatTransfer Area
Approx Weight
L x WRatings
KSCFH (Nm³/hr)
Dimensions Performance Data
DISTRIBUTED BY:5.06
CRYOGENIC PRODUCTS
• Increase ground clearance further enhances heat transfer by natural convection.• Extra capacity. Each finned aluminum heat transfer element features eight fins which measure 8 inches (200 mm) from tip to tip and
provide high capacity performance and fast defrosting. Elements have approximately 5 square feet per foot length (1.5 square meters per meter length) of external heat-exchanger surface area.
• Low pressure drop, full-bore passages in the elements provides more flow cross section. Internal fins promote heat transfer with additional surface area.
• Heat transfer elements of heights to 23ft (7,010 mm) are available to meet a range of process demands. Common assembly configurations and ratings are shown on the reverse side.
• New, larger bore fluid pages are available to maintain ultra low pressure drops on high flow rate multiple element units.
For models to meet special requirements including other models for greatly extended operating periods; for low pressure drop requirements for these vaporizers and others; for pressure drops for 8 hour ratings- consult Cryoquip. Pressure drop is less than 10% for the 1 day rating, based on 150 psig (10.3 bar) inlet pressure for all models except the L-18 and L-20 series. The performance of ambient air vaporizers is subject to many factors. These include flow, duty cycle, ambient temperature, relative humidity, freeze period, altitude, wind, solar radiation, operating pressure and proximity to adjacent structures. The effects of average solar and wind conditions are not included in the above ratings. Ratings are based on mean ambient conditions of 70ºF (21ºC) and 70% relative humidity. Special conditions may vary considerably for a particular application, thereby affecting performance.
SpecificationModule overall Heights; End Connections L-10:163” (4150mm), L-12:185” (4700mm), L-15:220”(5600mm) Standard: four bolt flange L-18:255” (6450mm), L-20:291”(7400mm),L-23:327”(8300mm) Optional: four bolt mates Working Pressure- Up to 500 psig (34.5bar) 1,1½, and 2 inch (All Aluminum Units)
Options AvailableSpecial end connections available on special order.Stainless Steel or Monel lined for services up to 15,000psig (1,034bar) and for semiconductor industry applications. Complete piping module assembly packages for complete vaporizer/piping installation.
VEC/VEB Series Electric Vaporizer
Cryoquip manufactures a new series of NEMA 4 modular Electric vaporizers. The new units are available for use with industrial gases such as Oxygen, Nitrogen, Argon (model VEB), and Carbon Dioxide (model VEC) as well as other special fluids.
Improved features include: • Removable and replaceable heater elements • Low pressure drop • Smaller footprint • Lightweight and portable
• Electric Cryogenic Vaporizer utilize high quality electric heating elements and stainless steel process tubes. Heating elements and tubes are specially positioned within the highly conductive aluminum wafer modules. Heat transfer is further enhance in vaporizer units by means of a spirovane turbulence promoter within each stainless tube, which also reduces fluid slugging and surging.
• Special Designs are available for low temperature gas exit vaporizers with controls to provide exit gas temperature near saturated vapor for special applications.
The new VEC/VEB Electric vaporizer SeriesVEC-Carbon Dioxide ServiceVEB-Oxygen, Nitrogen, Argon Service
VEx 1R 2T12VEx 2R 3T12VEx 2R 3T24VEx 3R 4T24VEx 4R 6T12VEx 6R 8T12VEx 10R 12T12
Model
28.5 (724)28.5 (724)28.5 (724)28.5 (724)28.5 (724)28.5 (724)34.5 (877)
24 (610)24 (610)24 (610)24 (610)30 (762)30 (762)30 (762)
A B
*Dimensions - Inch (mm)
Standard/ Options Available• Electronic digital controller• Wafer module insulation• Stainless steel enclosures• ANSI, Mueller four-bolt or DIN flange end connections• Explosion-proof Class 1, Div.2, Group D• Alarm dry contacts• ASME Code Certification
Design Data• Standard maximum working pressure 450 psig (31 barg); working pressures to 10,000 psig, (690 barg) available.• 10psi (.7 bar) pressure drop at rated flow and 150 psig (10 barg) working pressure, except T24 O2 units have higher pressure drops.
System Features• Easy dial thermostatic temperature controller.• Adjustable auto resetting over-temperature switch.• Adjustable manual resetting high limit shutdown switch.• NEMA 4 electrical control enclosure, door interlock handle.• Non-overheating design during no-flow.• Individual electrical components U.L. recognized, CSA certified and IEC approved.• Replaceable heating elements.
Units available for any voltage. Power requirements may vary slightly with each specific voltage.
• For pressure greater than 580 psig (40 barg) consult factory for proper model number. Specify operating pressure range.
DISTRIBUTED BY:5.07
CRYOGENIC PRODUCTS