ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Lead free Yes

Mechanical resistance to impacts

Very good

Cable flexibility Flexible

Chemical resistance Accidental

Water proof Good

Max.conductor temp.in service

60 °C

Operating temp. range

-25 .. 55 °C

Oil resistance

Yes

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 1 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Industrial flexible cable, insulation and outer sheath in elastomer

StandardsInternational HD 22.4; HD 516; IEC 60245-4 type 66National NF C 32-102-4

Description

Application

Installation

Conductors laid up

Marking

N = number of cores•G = with Green-Yellow•x = without Green-Yellow•S = section in mm²•

Nota

TITANEX® flexible cable is intended for installations with moving equipment, electric appliances and for building sites. The cable may be rated 0,6/1 kV where the installation has built-in protection and for motors in lifting appliances - machine tools - etc.

This cable can be used in refrigerating installations.

This cable can be installed in open air or be buried but with extra mechanical protection.

Assembled conductors.

USE <'har>N (x ou G) S TITANEX®

Max continuous operating conductor temperature in normal use :

+60°C ( in every case of mobile installation)

+85°C ( fixed protected installation )

+200°C ( in short circuit )

Permissible current rating is measured for an ambient temperature of 30°C and a maximum operating and conductor temperature of 85°C . For other temperature please refer to correction factors .

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 2 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Characteristics

Construction characteristicsOuter sheath Special cross-linked elastomerLead free YesSheath colour BlackInsulation Special cross-linked elastomerConductor material Bare copper

Mechanical characteristicsMechanical resistance to impacts Very goodCable flexibility Flexible

Usage characteristicsChemical resistance AccidentalWater proof GoodShort-circuit max. conductor temperature 200 °CMax. conductor temperature in service 60 °COperating temperature, range -25 .. 55 °COil resistance Yes

Product List =Make to order, =Make to stock

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

10055611 01394795 H07RN-F TITANEX 12G1.5 cut to length 12 1.5 Yes

10055614 01397021 H07RN-F TITANEX 12G2.5 cut to length 12 2.5 Yes

10056293 01394797 H07RN-F TITANEX 18G1.5 cut to length 18 1.5 Yes

10056295 01397022 H07RN-F TITANEX 18G2.5 cut to length 18 2.5 Yes

H07RN-F TITANEX 1x1.5 coil of 100 m 1 1.5 No

10055628 01394700 H07RN-F TITANEX 1x1.5 cut to length 1 1.5 No

10055580 01394704 H07RN-F TITANEX 1x10 cut to length 1 10 No

10055592 01394711 H07RN-F TITANEX 1x120 cut to length 1 120 No

10055593 01394712 H07RN-F TITANEX 1x150 cut to length 1 150 No

10055582 01394705 H07RN-F TITANEX 1x16 cut to length 1 16 No

10055635 H07RN-F TITANEX 1x185 cut to length 1 185 No

10055629 H07RN-F TITANEX 1x2.5 coil of 100 m 1 2.5 No

10055630 01394701 H07RN-F TITANEX 1x2.5 cut to length 1 2.5 No

10055636 H07RN-F TITANEX 1x240 cut to length 1 240 No

= Make to order, = Make to stock

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 3 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

H07RN-F TITANEX 1x240 drum of 500 m 1 240 No

10055584 01394706 H07RN-F TITANEX 1x25 cut to length 1 25 No

10055637 H07RN-F TITANEX 1x300 cut to lenght 1 300 No

H07RN-F TITANEX 1x300 cut to length 1 240 No

10055586 01394707 H07RN-F TITANEX 1x35 cut to length 1 35 No10055631 H07RN-F TITANEX 1x4 coil of 100 m 1 4 No10055632 01394702 H07RN-F TITANEX 1x4 cut to length 1 4 No

10055958 H07RN-F TITANEX 1x400 cut to length 1 400 No

10055588 01394708 H07RN-F TITANEX 1x50 cut to length 1 50 No

10055962 H07RN-F TITANEX 1x500 cut to length 1 500 No

10055634 01394703 H07RN-F TITANEX 1x6 cut to length 1 6 No10055590 01394709 H07RN-F TITANEX 1x70 cut to length 1 70 No10055591 01394710 H07RN-F TITANEX 1x95 cut to length 1 95 No

10055828 H07RN-F TITANEX 24G1.5 cut to length 24 1.5 Yes

10055618 01397023 H07RN-F TITANEX 27G1.5 cut to length 27 1.5 Yes

10055619 01397024 H07RN-F TITANEX 27G2.5 cut to length 27 2.5 Yes

10055639 01397005 H07RN-F TITANEX 2x1 coil of 100 m 2 1 No10055638 01397004 H07RN-F TITANEX 2x1 coil of 50 m 2 1 No10055641 H07RN-F TITANEX 2x1 cut to length 2 1 No

10062885 01394721 H07RN-F TITANEX 2x1.5 coil of 100 m 2 1.5 No

10062884 01394722 H07RN-F TITANEX 2x1.5 coil of 50 m 2 1.5 No

10055509 01394719 H07RN-F TITANEX 2x1.5 cut to length 2 1.5 No

10055510 01394809 H07RN-F TITANEX 2x1.5 drum of 1000 m 2 1.5 No

10055642 01397006 H07RN-F TITANEX 2x10 cut to length 2 10 No10055643 01397007 H07RN-F TITANEX 2x16 cut to length 2 16 No

10055513 01397002 H07RN-F TITANEX 2x2.5 coil of 100 m 2 2.5 No

10055512 01397001 H07RN-F TITANEX 2x2.5 coil of 50 m 2 2.5 NoH07RN-F TITANEX 2x2.5 drum of 500 m 2 2.5 No

10055675 01397008 H07RN-F TITANEX 2x25 cut to length 2 25 No10055516 H07RN-F TITANEX 2x4 coil of 100 m 2 4 No10055517 01394726 H07RN-F TITANEX 2x4 cut to length 2 4 No10055519 01394727 H07RN-F TITANEX 2x6 cut to length 2 6 No

10056294 01397025 H07RN-F TITANEX 36G1.5 cut to length 36 1.5 Yes

= Make to order, = Make to stock

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 4 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

10056296 01397026 H07RN-F TITANEX 36G2.5 cut to length 36 2.5 Yes

10055623 01397010 H07RN-F TITANEX 3G1 coil of 100 m 3 1 Yes10055622 01397009 H07RN-F TITANEX 3G1 coil of 50 m 3 1 Yes10055624 01394731 H07RN-F TITANEX 3G1 cut to length 3 1 Yes

10062887 01394737 H07RN-F TITANEX 3G1.5 coil of 100 m 3 1.5 Yes

10062886 01394736 H07RN-F TITANEX 3G1.5 coil of 50 m 3 1.5 Yes

10055523 01394734 H07RN-F TITANEX 3G1.5 cut to length 3 1.5 Yes

10055525 01394810 H07RN-F TITANEX 3G1.5 drum of 1000 m 3 1.5 Yes

H07RN-F TITANEX 3G1.5 drum of 500 m 3 1.5 Yes

10055645 01394745 H07RN-F TITANEX 3G10 cut to length 3 10 Yes

10056078 H07RN-F TITANEX 3G120 cut to length 3 120 Yes

10056497 H07RN-F TITANEX 3G150 cut to length 3 150 Yes

10055621 01394746 H07RN-F TITANEX 3G16 cut to length 3 16 Yes

10055934 H07RN-F TITANEX 3G185 cut to length 3 185 Yes

10063711 01394741 H07RN-F TITANEX 3G2.5 coil of 100 m 3 2.5 Yes

10062888 01394740 H07RN-F TITANEX 3G2.5 coil of 50 m 3 2.5 Yes

10055530 01394738 H07RN-F TITANEX 3G2.5 cut to length 3 2.5 Yes

10055529 01394811 H07RN-F TITANEX 3G2.5 drum of 500 m 3 2.5 Yes

H07RN-F TITANEX 3G240 cut to length 3 240 Yes

10055646 01397013 H07RN-F TITANEX 3G25 cut to length 3 25 Yes

H07RN-F TITANEX 3G300 cut to length 3 300 Yes

10055647 01397014 H07RN-F TITANEX 3G35 cut to length 3 35 Yes

10056057 H07RN-F TITANEX 3G4 coil of 100 m 3 4 Yes10055534 H07RN-F TITANEX 3G4 coil of 50 m 3 4 Yes

10055648 01397015 H07RN-F TITANEX 3G50 cut to length 3 50 Yes

10056033 H07RN-F TITANEX 3G6 coil of 100 m 3 6 Yes10055790 H07RN-F TITANEX 3G6 coil of 50 m 3 6 Yes10055537 01394744 H07RN-F TITANEX 3G6 cut to length 3 6 Yes

= Make to order, = Make to stock

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 5 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

10055649 H07RN-F TITANEX 3G70 cut to length 3 70 Yes

10055672 H07RN-F TITANEX 3G95 cut to length 3 95 Yes

10055674 01397066 H07RN-F TITANEX 3x1.5 cut to length 3 1.5 No

10055505 01397067 H07RN-F TITANEX 3x2.5 cut to length 3 2.5

10055505 01397067 H07RN-F TITANEX 3x2.5 cut to length 3 2.5 No

10055651 H07RN-F TITANEX 4G1 coil of 100 m 4 1 Yes10055650 H07RN-F TITANEX 4G1 coil of 50 m 4 1 Yes10055652 01394752 H07RN-F TITANEX 4G1 cut to length 4 1 Yes

10062890 01394757 H07RN-F TITANEX 4G1.5 coil of 100 m 4 1.5 Yes

10062889 01394756 H07RN-F TITANEX 4G1.5 coil of 50 m 4 1.5 Yes

10055541 01394754 H07RN-F TITANEX 4G1.5 cut to length 4 1.5 Yes

10055542 01394816 H07RN-F TITANEX 4G1.5 drum of 1000 m 4 1.5 Yes

10055705 H07RN-F TITANEX 4G10 coil of 50 m 4 10 Yes

10055555 01394768 H07RN-F TITANEX 4G10 cut to length 4 10 Yes

10055556 H07RN-F TITANEX 4G10 drum of 500 m 4 10 Yes

10055676 H07RN-F TITANEX 4G120 cut to length 4 120 Yes

10055983 H07RN-F TITANEX 4G150 cut to length 4 150 Yes

10055557 H07RN-F TITANEX 4G16 coil of 50 m 4 16 Yes

10055558 01394769 H07RN-F TITANEX 4G16 cut to length 4 16 Yes

10055952 H07RN-F TITANEX 4G185 cut to length 4 185 Yes

10055547 01394758 H07RN-F TITANEX 4G2.5 cut to length 4 2.5 Yes

10063726 01394760 H07RN-F TITANEX 4G2.5 coil of 100 m 4 2.5 Yes

10062892 01394761 H07RN-F TITANEX 4G2.5 coil of 50 m 4 2.5 Yes

10055548 01394812 H07RN-F TITANEX 4G2.5 drum of 500 m 4 2.5 Yes

10056547 H07RN-F TITANEX 4G240 cut to length 4 240 Yes

10055594 01394770 H07RN-F TITANEX 4G25 cut to length 4 25 Yes

10055573 01394771 H07RN-F TITANEX 4G35 cut to length 4 35 Yes

= Make to order, = Make to stock

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 6 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

H07RN-F TITANEX 4G35 drum of 500 m 4 35 Yes

10056032 01397017 H07RN-F TITANEX 4G4 coil of 100 m 4 4 Yes10055550 01397016 H07RN-F TITANEX 4G4 coil of 50 m 4 4 Yes10055551 01394762 H07RN-F TITANEX 4G4 cut to length 4 4 Yes

10055552 01394813 H07RN-F TITANEX 4G4 drum of 500 m 4 4 Yes

10055560 01397705 H07RN-F TITANEX 4G50 cut to length 4 50 Yes

H07RN-F TITANEX 4G50 drum of 500 m 4 50 Yes

10055792 H07RN-F TITANEX 4G6 coil of 100 m 4 6 Yes10055791 H07RN-F TITANEX 4G6 coil of 50 m 4 6 Yes10055574 01394766 H07RN-F TITANEX 4G6 cut to length 4 6 Yes

10055653 H07RN-F TITANEX 4G70 cut to length 4 70 Yes

10055620 H07RN-F TITANEX 4G95 cut to length 4 95 Yes

10055681 01397068 H07RN-F TITANEX 4x1.5 cut to length 4 1.5 No

10055655 H07RN-F TITANEX 5G1 coil of 100 m 5 1 Yes10055656 01394776 H07RN-F TITANEX 5G1 cut to length 5 1 Yes

10063725 01394779 H07RN-F TITANEX 5G1.5 coil of 100 m 5 1.5 Yes

10062893 01394780 H07RN-F TITANEX 5G1.5 coil of 50 m 5 1.5 Yes

10055564 01394777 H07RN-F TITANEX 5G1.5 cut to length 5 1.5 Yes

10055565 01394814 H07RN-F TITANEX 5G1.5 drum of 500 m 5 1.5 Yes

10055794 H07RN-F TITANEX 5G10 coil of 50 m 5 10 Yes

10055602 01394789 H07RN-F TITANEX 5G10 cut to length 5 10 Yes

10055604 H07RN-F TITANEX 5G16 coil of 50 m 5 16 Yes

10055605 01394790 H07RN-F TITANEX 5G16 cut to length 5 16 Yes

10063724 01394783 H07RN-F TITANEX 5G2.5 coil of 100 m 5 2.5 Yes

10062914 01394784 H07RN-F TITANEX 5G2.5 coil of 50 m 5 2.5 Yes

10055571 01394781 H07RN-F TITANEX 5G2.5 cut to length 5 2.5 Yes

10055569 01394815 H07RN-F TITANEX 5G2.5 drum of 500 m 5 2.5 Yes

10055627 01394791 H07RN-F TITANEX 5G25 cut to length 5 25 Yes

10056037 H07RN-F TITANEX 5G4 coil of 100 m 5 4 Yes10055596 H07RN-F TITANEX 5G4 coil of 50 m 5 4 Yes

= Make to order, = Make to stock

ContactBuilding contactcontact.batiment@nexans.com

HO7RNF

Version V1.0 Generated 3/10/12 - http://www.nexans.ma Page 7 / 7All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of

Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.

Nexans ref.

Country ref.

Name Nb. of cores

Cross section (mm²)

Green/ Yellow core

10055597 01397251 H07RN-F TITANEX 5G4 cut to length 5 4 Yes

10055598 H07RN-F TITANEX 5G4 drum of 500 m 5 4 Yes

10056056 H07RN-F TITANEX 5G6 coil of 100 m 5 6 Yes10055795 H07RN-F TITANEX 5G6 coil of 50 m 5 6 Yes10055600 01394787 H07RN-F TITANEX 5G6 cut to length 5 6 Yes

10055601 H07RN-F TITANEX 5G6 drum of 500 m 5 6 Yes

10055577 01394793 H07RN-F TITANEX 7G1.5 cut to length 7 1.5 Yes

10055609 01394794 H07RN-F TITANEX 7G2.5 cut to length 7 2.5 Yes

= Make to order, = Make to stock

New cores identificationCore identification in accordance with HD 308 S2 (October 2001)Identification of cores in cables and flexible cords.

Number of coresHD 308 S2 since january 2004

G (earth core) X (without earth core)1 Black (preferential) Black (preferential)

2 Blue + Brown Blue + Brown

3* Green - Yellow + Blue + Brown Brown + Black + Grey

3** Blue + Brown + Black

4 Green - Yellow + Brown + Black + Grey Blue + Brown + Black + Grey

5 Green - Yellow + Blue + Brown + Black + Grey Blue + Brown + Black + Grey + Black

> 5 White printed numbers + 1 Green - Yellow White printed numbers

* For the cables without Green/Yellow with a cross-section >4mm²

** For the cables without Green/Yellow with a cross-section of 1,5mm² & 2,5mm²