5g network architecture and design
TRANSCRIPT
5G Network Architecture and Design Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO
25th January 2017
© British Telecommunications plc
Contents
• 5G Network Architecture
– 3GPP logical network architecture
– Functional blocks
– Reference points (interfaces)
– RAN functional split
• Adding 5G to an existing multi-RAT site
– RAT types and base station configurations
– Scaling mobile backhaul and/or introducing NGFI
• 5G Architecture Options
– Standalone and non-standalone modes of operation
– EPC to NGCN migration scenarios and inter-working
• Summary
5G Network Architecture
© British Telecommunications plc
3GPP 5G network architecture
UE
RAN
UPF
DN
AMF
SMF
PCF
UDM
AF
AUSF
NG1
NG7
NG6
NG5
NG4
NG3
NG2
NG8
NG9 - between UPFs
NG14 - between AMFs
NG10
NG11
NG12
NG13
NG15
NR air i/f
Note: Focus on mobile however Access Network (AN) could be fixed
© British Telecommunications plc
Functional blocks within 5G network architecture
1. AUSF = Authentication Server Function
2. UDM = Unified Data Management
3. AMF = Core Access and Mobility Management Function
4. SMF = Session Management Function
5. PCF = Policy Control Function
6. AF = Application Function
7. UE = User Equipment
8. ((R)AN) = (Radio) Access Network
9. UPF = User Plane Function
10. DN = Data Network, e.g. operator services, Internet or 3rd party services
© British Telecommunications plc
5G interfaces (reference points)
• NG1: Reference point between the UE and the Access and Mobility Management function.
• NG2: Reference point between the (R)AN and the Access and Mobility Management function.
• NG3: Reference point between the (R)AN and the User plane function (UPF).
• NG4: Reference point between the Session Management function (SMF) and the User plane function (UPF).
• NG5: Reference point between the Policy Function (PCF) and an Application Function (AF).
• NG6: Reference point between the UP function (UPF) and a Data Network (DN).
• NG7: Reference point between the Session Management function (SMF) and the Policy Control function (PCF).
• NG7r: Reference point between the vPCF and the hPCF.
• NG8: Reference point between Unified Data Management and AMF.
• NG9: Reference point between two Core User plane functions (UPFs).
• NG10: Reference point between UDM and SMF.
• NG11: Reference point between Access and Mobility Management function (AMF) and Session Management function (SMF).
• NG12: Reference point between Access and Mobility Management function (AMF) and Authentication Server function (AUSF).
• NG13: Reference point between UDM and Authentication Server function (AUSF).
• NG14: Reference point between 2 Access and Mobility Management function (AMF).
• NG15: Reference point between the PCF and the AMF in case of non-roaming scenario, V-PCF and AMF in case of roaming scenario.
• NG16: Reference point between two SMFs, (in roaming case between V-SMF and the H-SMF).
© British Telecommunications plc
5G RAN and functional decomposition…
UE
RAN
UPF
DN NG6 NG3 NR air i/f
DU
CU NGFI
? ? CU = Centralised Unit
DU = Distributed Unit
NGFI = Next Generation Fronthaul Interface
© British Telecommunications plc
RAN functional splits and impact on backhaul
RRC
PDCP
Data
Low-
RLC
High-
MAC
High-
PHY
Low-
MAC
Low-
PHY
RF High-
RLC
RRC
PDCP
Data
Low-
RLC
High-
MAC
High-
PHY
Low-
MAC
Low-
PHY
RF High-
RLC
Option
1 Option
2
Option
3
Option
4
Option
5
Option
6
Option
7
Option
8
End to end
maximum
latency
Capacity
requirement
Higher layer splits Lower layer splits
Adding 5G to an existing
multi-RAT macro-site
© British Telecommunications plc
Adding 5G to an existing multi-RAT macro-site
• Current multi-RAT macro-cell sites typically have backhaul of 1Gbps
• Capacity is shared between RATs and in many cases, between network sharing partners (MNOs)
• Note: >1Gbps backhaul is being deployed to support certain LTE radio configurations
– 1Gbps and beyond on LTE radio interface
2G/4G
SRAN
(1/GE)
3G
MORAN
100M/1GE
4G
Net-Share
(1GE)
1GE
© British Telecommunications plc
Adding 5G to an existing multi-RAT macro-site
• 5G deployment to macro-cells is very likely to be <6GHz spectrum bands
• Massive MIMO is a key concept for 5G – 32/64/128+ antennas
• 5G NR channel bandwidths to be larger than current LTE channels
• Most spectrum will be unpaired, therefore phase/time synchronisation is required for TDD operation
• Assume eMBB is to be the first use case, the maximum capacity is required
• Backhaul, or NGFI, will require a minimum of 10GE local connectivity with scalable end to end capacity
2G/4G
SRAN
(1/10GE)
3G
MORAN
100M/1GE
4G
Net-Share
(1GE)
5G
gNB
(10GE)
?
© British Telecommunications plc
Adding 5G to an existing multi-RAT macro-site
• 5G deployment to macro-cells is likely to be <6GHz spectrum bands
• Massive MIMO is a key concept for 5G – 32/64/128+ antennas
• 5G NR channel bandwidths to be larger than current LTE channels
• Most spectrum will be unpaired, therefore phase/time synchronisation is required for TDD operation
• Assume eMBB is to be the first use case, the maximum capacity is required
• Backhaul, or NGFI, will require a minimum of 10GE local connectivity with scalable end to end capacity
• mm-wave radio backhaul/x-haul will support 10Gbps+
2G/4G
SRAN
(1/10GE)
3G
MORAN
100M/1GE
4G
Net-Share
(1GE)
5G
gNB
(10GE)
Sub-tended
mm-wave
(10GE+)
?
5G Architecture Options
© British Telecommunications plc
5G Architecture Options 12 options identified, not all will be implemented, slides illustrate most likely solutions (options 5, 6, 8 and 8a considered unlikely and therefore not illustrated (option 1 is legacy))
1: Standalone LTE, EPC connected 2: Standalone NR, NGCN connected
eLTE
EPC
UE
5G NR
NGC
UE
User plane
S1-u Control plane
S1-c
User plane
NG3 Control plane
NG2
Release 15 UE
© British Telecommunications plc
5G migration scenarios
3: Non-standalone/LTE assisted,
EPC connected
3a: Non-standalone/LTE assisted,
EPC connected
eLTE
EPC
5G NR
NGC
UE
eLTE
EPC
5G NR
NGC
UE
© British Telecommunications plc
5G migration scenarios
4: Non-standalone/NR assisted,
NGCN connected
4a: Non-standalone/NR assisted,
NGCN connected
eLTE
EPC
5G NR
NGC
UE
eLTE
EPC
5G NR
NGC
UE
© British Telecommunications plc
5G migration scenarios
7: Non-standalone/LTE assisted,
NGCN connected
7a: Non-standalone/LTE assisted,
NGCN connected
eLTE
EPC
5G NR
NGC
UE
eLTE
EPC
5G NR
NGC
UE
Summary
© British Telecommunications plc
Summary
• 5G standards are still under development within 3GPP
• Final technical contributions for the initial 5G standards are being discussed (Release 15)
• 5G will support enhanced Mobile Broadband (eMBB), Ultra-Reliable and Low Latency Communications (URLLC) and massive Machine Type Communications (mMTC)
• 5G RAN will be different from previous iteration of C-RAN and D-RAN
• NGFI will likely be implemented for 5G and eLTE - exact functional splits tbd
• There is significant complexity to manage in the core network, including inter-working with and migration to NGCN
• BT is pro-actively developing 5G solutions…
© British Telecommunications plc
THANK YOU
Questions?