6 ft. los angeles department of water and power...if installation assistance of exterior signage is...

4
Decal Interior Display Foam Board (IN) Interior Display Sintra (EX) Exterior Display 10x12 11x16.5 20x30 36x48 LOS ANGELES DEPARTMENT OF WATER AND POWER V01.21V2 COVID-19 FOR YOUR SAFETY SIGNAGE CATALOG 6 ft. Physical Distance To request COVID-19 related signage please follow the procedure below: 1. Review attached catalog of available signage options (page 2 and 3). The signage sizes are fixed to a predetermined size. The size is indicated in the poster title. Example: Hallways_PP_20x30.PDF is a 20x30 sized signage. Please note: The signage size denotes the available and recommended substrate mounting. Please refer to the chart below: 2. On the attached Reprographics Request form (page 4) include: Complete poster title for each requested signage Quantity for each signage Indicate material substrate for each signage, referring to table above for available options. 3. To process your request, you must have access to the Department’s network and: • Create a new folder on the Reprographics’ Server, using YOUR NAME as the folder title: \\filer03\igprintshope\PrintShop\REPROGRAPHICS_DEPT_ROOM_B7C • Open the signage directly at: \\filer03.joint.ladwp.com\PublicAffairs2\COVID_signage • Copy desired signage files. DO NOT DELETE OR MOVE THESE FILES. • Paste them into the NEW folder that you made on the Reprographics’ Server 4. To start your job, please be sure to complete the request form, including a charge number and contact information; and submit the form via email to [email protected] Once your request is complete, Luis Alderete or a member of Reprographics will notify the provided contact that signage is ready for pickup. 5. If after reviewing the attached catalog of available signage, you determine that none of the available options suite your particular facility needs, please send an email to [email protected] requesting unique or modified signage. Signage has been designed in compliance with LADWP Department branding guidelines and health and safety language requirements. DO NOT ALTER ANY SIGNAGE BY ANY METHOD. If installation assistance of exterior signage is required, please contact Gary Arso & Walter Veljacic after you have been notified that signage is available for pickup. Due to high volume of request, there may be some delay with completing your signage needs. Your patience and cooperation is greatly appreciated. X X X X X X X X OR OR

Upload: others

Post on 16-Feb-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

  • Decal Interior Display

    Foam Board (IN) Interior Display

    Sintra(EX) Exterior Display

    10x12

    11x16.5

    20x30

    36x48

    LOS ANGELES DEPARTMENTOF WATER AND POWER

    V 0 1 . 2 1 V 2

    C O V I D - 1 9 F O R Y O U R S A F E T YS I G N A G E C ATA L O G

    6 ft.PhysicalDistance

    To request COVID-19 related signage please follow the procedure below:

    1. Review attached catalog of available signage options (page 2 and 3). The signage sizes are fixed to a predetermined size. The size is indicated in the poster title. Example: Hallways_PP_20x30.PDF is a 20x30 sized signage. Please note: The signage size denotes the available and recommended substrate mounting. Please refer to the chart below:

    2. On the attached Reprographics Request form (page 4) include:• Complete poster title for each requested signage• Quantity for each signage • Indicate material substrate for each signage, referring to table above for available options.

    3. To process your request, you must have access to the Department’s network and:• Create a new folder on the Reprographics’ Server, using YOUR NAME as the folder title:

    \\filer03\igprintshope\PrintShop\REPROGRAPHICS_DEPT_ROOM_B7C• Open the signage directly at: \\filer03.joint.ladwp.com\PublicAffairs2\COVID_signage• Copy desired signage files. DO NOT DELETE OR MOVE THESE FILES.• Paste them into the NEW folder that you made on the Reprographics’ Server

    4. To start your job, please be sure to complete the request form, including a charge number and contact information; and submit the form via email to [email protected]

    Once your request is complete, Luis Alderete or a member of Reprographics will notify the provided contact that signage is ready for pickup.

    5. If after reviewing the attached catalog of available signage, you determine that none of the available options suite your particular facility needs, please send an email to [email protected] requesting unique or modified signage.

    Signage has been designed in compliance with LADWP Department branding guidelines and health and safety language requirements. DO NOT ALTER ANY SIGNAGE BY ANY METHOD.

    If installation assistance of exterior signage is required, please contact Gary Arso & Walter Veljacic after you have been notified that signage is available for pickup.

    Due to high volume of request, there may be some delay with completing your signage needs. Your patience and cooperation is greatly appreciated.

    X XX X

    X XX X

    OROR

    //filer03/igprintshope/PrintShop/REPROGRAPHICS_DEPT_ROOM_B7C//filer03.joint.ladwp.com/PublicAffairs2/COVID_signagemailto: [email protected]:[email protected]

  • Industrial Graphics RequisitionReprographic Services Room B7C

    213•367•3391

    Date In:____/____/____

    Charge #:_________________ Room/Location:_______________________________

    No. of Originals:_______ File Size:______x______

    No. Copies:________ Finished Size:______x______No. Copies:________ Finished Size:______x______

    Job Name/Description:__________________________________________________________

    Phone #:________________________

    Date Due:____/____/____

    Name:____________________________________

    File in Repro Folder

    Roll in Sets

    Single page PDFs Multi page PDFRolled Image Out

    Scan To File ---

    Rolled Image In

    Lay Flat

    Staple

    Digital Imaging

    Heavy Bond

    BondVellumMylar

    Bond

    Heavy Bond

    Photo Gloss Matte LamDry Erase

    Gloss Lam 3/16” FoamCore1/2” FoamCoreSintra Board 1/8”

    Framing/Edge TrimEasel BacksGrommets

    Scrim VinylMatte

    Lamination Mounting & FinishingB & W COLOR

    Special Instructions:____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

    Do Not Write Below This Line

    P TYPE QTY

    TOTAL

    @SIZE / SQ. FT.

    #

    Date In Month: Date In Day: Date In Year: Date Due Month: Date Due Day: Date Due Year: Name: Phone: Charge Number: RoomLocation: Job NameDescription: File in Repro Folder: OffNo of Originals: Width: Hieght: No Copies: Finished Size Width: Finished Size Hieght: No Copies_2: Finished Size_2 Width: Finished Size 2 Hieght: Roll in Sets: OffLay Flat: OffRolled Image In: OffStaple: OffRolled Image Out: OffScan To File: OffSingle page PDFs: OffMulti page PDF: OffBond: OffVellum: OffMylar: OffHeavy Bond: OffColor Bond: OffPhoto Gloss: OffMatte: OffScrim Vinyl: OffHeavy Bond Color: OffGloss Lam: OffMatte Lam: OffDry Erase: Off3/16" Foam: Off1/2" Foam: Off1/8" Sintra: OffFraming: OffEasel: OffGrommets: OffSpecial Instructions 1: Special Instructions 2: Special Instructions 3: Special Instructions 4: Special Instructions 5: Form Number: