6 ways to make candle making easy

NIRAL INDUSTRIES www.candlemould.com

6 Ways to make Candle

Making EASYA GUIDE FOR EVERY CANDLE MAKER

Page No :: www.candlemould.com

TABLE OF CONTENTS

1. HOW TO LOCK SKRINKAGE MAKING CANDLE IN

SINGLE POURING

2. HOW COLOUR CAN CHANGE THE LOOKS OF CANDLE

3. FIRE SAFETY

4. HOW TO USE WAX

5. BATCH QUANTITY

6. ABOUT SOME ADDITIVES

Page No 2 :: www.candlemould.com
http://www.facebook.com/siliconecandlemoulds

CHAPTER ONE

HOW TO LOCK SHRINKAGE

MAKING CANDLE IN SINGLE

POUR


Some Excellent Tips by which you can Lock Shrinkage

& make Candle in Single Pouring

This are moulds in which we

will be pouring Wax

Wax is now completely filled with

Wax. Zoom the photo if required

At this time wax is in Semi Hard &

we will place 1 mould in water

Water should come till complete

Top over the wax and let it cool.

Left mould you will find shrinkage

Right one will find extra wax

Rod place to show the shrinkage &

Right one with extra wax after level


How does it actually work

When we melt the Wax, the Volume of Wax increases

And when its in Semi Hard phase and we cool it

It gets lock at that position. Here you get following Benefit


1. In Single Pouring you can make candle very Easily & Happily @ Home

2. You Save on Cost of additional Wax which needed to pour

3. And Time which takes for additional wax to cool by this your

production capacity will also increase

4. This will also Increase the Shine and Gloss of Wax

5. Cooler the Water Better the Result.

CHAPTER TWO

How Proper Colour can change

the Looks of Candles


For adding Colour there are few option

Industrial Colour / Pigmnet. In Industrial Colour there are two types

1. Fluorescent Colour

2. Oil Grade Colour

For Hobby many use Crayons. Do not use Crayon as crayon contains

50% Clay Powder 40% Wax & 10% Industrial Pigment. This Clay

Powder makes the Candle look Dull and does not get mix with Wax

settles down and creates obstacle while Burning.

AVOID USING CRAYON

How Proper Colour can change the Looks of Candles

These 2 moulds we will pour

2 different types of Colour

Left is Fluorescent Yellow Colour

Right is Oil grade Yellow Colour

Filling both the mould with different

grade of colour. ZOOM Photo

Wax is now cooled and we shall

take out candle

Yellow Oil colour got penetrate in

right mould & Fluoro colour didnt

Left - Flourscent :: Right - Oil Color

You will see Petals in Oil Coloured

Candle looks more sharp & detailed

compared to Fluorscent colour


Fluorescent v/s Oil ColourS. No Fluorescent Colour Oil Based Colour

How to use One need to make Paste with Coconut Oil & then need to add to molten wax

One can directly add Powder Colour to molten wax

How does it mix

Fluorescent Colour gets dispersed in wax so when you add in wax give a good stirring and rubbing over vessel

Oil Colour Penetrate in wax and any surface. One directly mixed so no

Does it penetrate on mould

It does not penetrate in Mould or any surface.

It gets penetrate in Mould and also other surface like furniture, packing box, whichthen cannot be removed

Which colourlooks great

In Fluorescent Colour, candles look good but detailing is less

One get more detailed lining in intricate design when made with Oil Colour.

Suggested for Suggested for Chunk, Paraffin Suggested for Gel Candle, Paraffin

Burning Good burning but less compared to Oil Excellent Burning support

When to add Do not add in very Hot wax If doesnt mix apply more heat to wax

UV Stabiliser No such thing required for FluorscentColour

UV rays of Sun, TubeLight fades up Oil Grade colour. So UV Stabilser is suggested


Our Colours are very Pure, Concentrate and of Finest Technical

grade for Candle Industry

Looks of candle one get in Oil Colour will never get in

Fluorescent Colour, but for separate colour you need separate

moulds.

Many established candle makers are buying separate mould for

separate colour as their Focus is on Shade &Texture of Candle

UV stabiliser needs to be added for Oil Colour. We have this

item in product list.

Mostly in Palm Wax and other waxes Oil Colour gets mixed

properly

MORE ABOUT COLOURS


CHAPTER THREE

FIRE SAFETY


FLASH POINT TEMPERATURE AT WHICH WAX CATCHED FIRE.

Proper care should be taken that wax is not overheated.

But in case if any of such thing happen then

TURN OFF GAS & COVER WITH PAN / LID CAREFULLY

Never use water to put out a wax fire, it will spread the fire! If you don't

have a proper fire extinguisher nearby, use baking soda, sand or flour to

extinguish the flames.

CHAPTER FOUR

HOW TO USE WAX


Always make small pieces then melt it.

By this melted wax will not get overheated

Use bigger then required vessel, but this it will give good control over

the pouring of wax

Suggested to use Steel Vessel.

CHAPTER FIVE

BATCH QUANTITYTO ACTUALLY MAKE QUALITY CANDLES BATCH QUANTITY

PLAYS A VERY IMPORTANT ROLE. FIND MORE DETAILS IN FOLLOWING PAGES


Batch Quantity means making candle with uniform pattern of quantity. Unlike

how we make TEA in daily basis. Here cup is standard Batch quantity

Having proper control over weight of each item. By doing so you will have

exact idea how much actually you added different Grades of Waxes,

Perfume, Additives and so on. You may buy a good Weighing Scale.

Suggested to make a Batch of at least 500 gm and multiple of that so

whenever you melt wax it would be 500 1000 1500 and so on.

You might have observed that at Home when daily Dal is made, everyday

there will be slight change in Taste. But in Hotel their taste of Sambhar is same

for years. There are Hotels whose taste are same for more than 10 years also.

Batch quantity will also help you to have continuous improvement and

monitoring in your product and whatever test - sampling you do you can

measure that. It will also help you to calculate exact costing.

MORE ABOUT BATCH QUANTITY


CHAPTER SIX

ADDITIVESTO ACTUALLY MAKE QUALITY CANDLES THERE ARE MANY ADDITIVES

WHICH NEEDED TO BE ADDED TO WAX TO INCREASE SHINE, GLOSS

BURING TIME, SMOOTHNESS OF CANDLE

FIND MORE DETAILS IN FOLLOWING PAGES


Following are some of Wax additives which we have or are available in market.

Purpose is to explain you what types if additives can be used for Candle Making

Wax Whitener It removes Yellow content from wax and will make the colours look more

Bright

Wax Shinner It bringswhiteness and shine to candle. Paraffin Wax is transperant. At times

we need to make it look slight opaque so that textures over Candle look good. For that you

can use our Wax Shinner. Also it make make any colour lighter by certain shades.

Wax Hardener Acidic type Hardener like Stearic Acid are not suggested for rubber moulds

We have some Plastic Granules type Hardener which will make Candle Hard, Non Drip.

Bees Wax Brings toughness and Flexibility to wax and also binds perfume. Exceed use

may make candle opaque

Micro Wax Brings Flexibility and smoothness to candle

UV Stabiliser UV rays of Sun, TubeLight fades up Oil Grade colour. So UV Stabilser is

suggested to use.

MORE ABOUT ADDITIVES


INSERT IMAGES

Some of our Office different area photos showroom, packaging, warehouse, office, training area

www.candlemould.com

Indias No 1 site for Candle Making Moulds & Accessories

Indias largest manufacturer of Candle Mould


FREE SAMPLE COLOUR

USE COUPEN CODE nir001

For your sampling purpose you will get our assorted different set of 3 Oil Color + 3 Fluoro Color

Offer valid till 31 Oct 2014

GO TO WEBSITE NOW

Niral Industries230 Gala Complex, Dumping Rd., Mulund (W), Mumbai 4000800-8879651091 - 2 - 3 :: [email protected] :: www.candlemould.com

Hope you all have got wonderful Details. Looking to provide more such details in Future

Mr. Ramesh S. MaisheriMr. Fenil R. Maisheri
http://www.candlemould.com/http://www.candlemould.com/http://www.facebook.com/siliconecandlemoulds

6 ways to make candle making easy

Documents

powder colour

oil grade colour

time wax

candleyellow oil colour

mixfluorescent colour

vesseloil colour

different grade of colour

twohow proper colour